Essential Tools for Contractors

Essential Tools for Contractors
2016
CONTRACTOR RESOURCE
ESSENTIAL PRODUCTS FOR CONTRACTORS
Insulated Tools
Safety Equipment
Power Tool Accessories
Holemaking
Cable & Bolt Cutters
Work @ Height Pliers
Test & Measurement
Wire Pulling & Conduit Tools
Torque Wrenches / Screwdrivers
These days, it can be hard
to find companies that make
products you can count on.
TABLE OF CONTENTS
But that’s exactly what you’ll get from
Klein Tools. We don’t just make great
products, we make great products
that stand up to the demands of the
professionals who use them every day.
Because our standards are as high as
yours, we demand that every product we
offer delivers all the performance,
durability and precision that you need to
get the job done right.
Pliers with Tether Ring
And by using only the highest quality
materials, superior workmanship, and
keeping our manufacturing as close to
home as we can, we’re able uphold those
rigorous standards.
Electrical Testers
Klein isn’t just the name of our company,
it’s also our family name, so we have to
be proud of everything we make. And
since we’re an American company that’s
been family-owned and family-run, since
1857, you know you can count on us to
be here tomorrow.
Personal Protective Safety Equipment / Gloves
So buy a Klein tool and you’ll know what
all the professionals know…when you
pick up a Klein, it’ll never let you down.
Reference Guide
That’s why we’re the #1
choice of Professional
Electricians in the US.
Fish Tapes, Lubricants & Accessories
Conduit Benders, Fish Rods & Accessories
Low Voltage Wire Pulling
Holemaking
Test & Measurement and Accessories
Torque Tools
Power Tool Accessories
Insulated Tools
Cable Cutters
Bolt Cutters
Warnings & Warranty
1
2
3
4
5
6-7
8
9
10-11
12-14
15-16
17
18
19-20
21
Pliers with Tether Ring
MADE IN USA
Pliers with Tether Ring
• High-leverage designs. Rivet is closer to the cutting edge for greater cutting power than other plier designs.
• Angled head design of the diagonal-cutting pliers allow for easy work in confined spaces.
• Side-cutting pliers feature a streamlined design with sure-gripping, cross-hatched knurled jaws.
• Cat. No. D248-9STT, D213-9STT and D201-7CSTT feature a hook-bend in the handle for added grip and leverage.
• Unique handle tempering helps absorb the “snap” when cutting wire.
Split ring for
tethering
D228-8TT
Cat. No.
D248-9STT
Nose Type
D213-9NETT
Jaw
Length
Jaw
Thickness
Jaw
Width
D213-9STT
Knife
Length
D201-7CSTT
Overall
Length
High-Leverage Diagonal-Cutting Pliers
D228-8TT
—
13/16" (21 mm)
7/16" (11 mm)
1-3/16" (30 mm)
—
8-1/16" (205 mm)
D248-9STT
—
13/16" (21 mm)
7/16" (11 mm)
1-3/16" (30 mm)
—
9-3/16" (233 mm)
High-Leverage Side-Cutting Pliers
D213-9NETT
New England
1-19/32" (41 mm)
5/8" (16 mm)
1-1/4" (32 mm)
25/32" (20 mm)
9-3/8" (238 mm)
D213-9STT
Square
1-9/32" (33 mm)
5/8" (16 mm)
1-1/4" (32 mm)
25/32" (20 mm)
9-1/8" (232 mm)
D201-7CSTT
Square
1-9/32" (33 mm)
1/2" (13 mm)
1-5/32" (29 mm)
5/8" (16 mm)
9-1/4" (235 mm)
1
Fish Tapes, Lubricants and Accessories
Multi-Groove Fiberglass Fish Tapes
MADE IN USA
• Rigidity for long distance.
• Less surface contact when pushing through crowded conduit.
Fish Tapes & Foam Wire Pulling Lubricant
Cat. No.
Length
Width
Multi-Groove Fiberglass – 7" Spiral Leader
56055
100' (30 m)
3/16" (7" leader)
56056
200' (61 m)
3/16" (7" leader)
Multi-Groove Fiberglass – Non-Conductive
56057
50' (15 m)
3/16"
56058
100' (30 m)
3/16"
56059
200' (61 m)
3/16"
Laser Etched – Stainless Steel for Corrosion Resistance
56007
125' (38 m)
1/8" (3 mm)
56008
240' (73 m)
1/8" (3 mm)
Laser Etched – Flat Steel
56000
25' (7 m)
1/8" (3 mm)
56001
50' (15 m)
1/8" (3 mm)
56002
65' (19 m)
1/8" (3 mm)
56003
125' (38 m)
1/8" (3 mm)
56004
240' (73 m)
1/8" (3 mm)
56005
25' (7 m)
1/4" (6.3 mm)
56006
100' (30 m)
1/4" (6.3 mm)
Spiral Steel
56013
50' (15 m)
3/16" (4.8 mm)
Replacement Steel Tapes
56065
65' (19 m)
1/8" (3 mm)
56125
125' (38 m)
1/8" (3 mm)
56240
240' (73 m)
1/8" (3 mm)
Cat. No.
Length
Poly Pull Line
56108
500' (152 m)
56110
6500' (1981 m)
Foam Wire Pulling Lubricant
51100
–
Height
Fiberglass Performance
at 25% Lower Cost!*
Multi-Groove Fiberglass
Reel Diameter
Weight (lbs./kg)
–
–
13" (330 mm)
17" (432 mm)
3.03 lbs. (1.37 kg)
6.16 lbs. (2.79 kg)
7" Spiral Leader
–
–
–
13" (330 mm)
13" (330 mm)
17" (432 mm)
2.33 lbs. (1.05 kg)
3.05 lbs. (1.38 kg)
6.04 lbs. (2.74 kg)
Non-Conductive
.062" (1.5 mm)
.062" (1.5 mm)
13" (330 mm)
13" (330 mm)
4.7 lbs. (2.13 kg)
7.5 lbs. (3.40 kg)
.045" (1.1 mm)
.045" (1.1 mm)
.062" (1.5 mm)
.062" (1.5 mm)
.062" (1.5 mm)
.030" (.7 mm)
.062" (1.5 mm)
7" (178 mm)
7" (178 mm)
9" (229 mm)
13" (330 mm)
13" (330 mm)
7" (178 mm)
13" (330 mm)
1.0 lbs. (0.45 kg)
1.3 lbs. (0.59 kg)
2.6 lbs. (1.18 kg)
4.7 lbs. (2.13 kg)
7.5 lbs. (3.40 kg)
1.1 lbs. (0.50 kg)
6.8 lbs. (3.08 kg)
–
13" (330 mm)
5.1 lbs. (2.31 kg)
.062" (1.5 mm)
.062" (1.5 mm)
.062" (1.5 mm)
–
–
–
1.7 lbs. (0.77 kg)
3.3 lbs. (1.50 kg)
6.1 lbs. (2.77 kg)
Size Description
Weight (lbs./kg)
1-qt. container with orange tracer 210 lbs. average breaking strength
5 gal. bucket with orange tracer 210 lbs. average breaking strength
1 lbs. (0.45 kg)
11 lbs. (4.9 kg)
Foam Wire Pulling Lubricant
19 oz (0.54 kg)
NO DRIPS! NO STAINS! NO MESS!
4x
•
•
•
eyelet tip offers added protection
against shock from energized sources.
Stainless / Flat Steel
Laser Etched Markings
in 1 foot increments allow you
to more accurately measure the
depth of conduit runs and determine
the amount of tape left to pay out.ut.
*When compared to the published price of
Klein Tools fiberglass fish tapes.
Greater Yield
than gels/waxes*
Apply directly into the conduit. No need to pre-coat wires.
No mess formula stays where it is applied, even in vertical conduit!
Dissolves clean from hands and clothing.
WARNING: Do not use wet product on live circuits. Compound is electrically conductive before it dries.
2
*One can equals one gallon or 4 quarts of wax/gel lubricants.
Based on job site pulls with foam in 3/4" conduit when used as directed.
WARNING: Contents under pressure. Do not expose container to direct sunlight or temperatures above 120°F. Do not transport
or store near heat sources. Keep cans dry and away from sources of ignition. If frozen, gradually warm to room temperature. 51100
Conduit Benders, Fish Rods and Accessories
All fish and glow rods feature
our exclusive Splinter Guard™
protection from painful
fiberglass splinters
MADE IN USA
Fish Rods
Glow Rods
56325
56418
Cat. No. Description
Fish Rods
56304 4' Lo-Flex Fish Rod
56306 6' Lo-Flex Fish Rod
56312 12' Lo-Flex Fish Rod Set
56324 24' Lo-Flex Fish Rod Set
56325 25' Fish and Glow Rod Set
Glow Rods
56405 5' Mid-Flex Glow Rod
56406 6' Hi-Flex Glow Rod
56409 9' Mid-Flex Glow Rod Set
56415 15' Mid-Flex Glow Rod Set
56418 18' Hi-Flex Glow Rod Set
Set Contains
Overall Length
Diameter
Weight (lbs./kg)
N/A
N/A
(3) 1/4" diameter 4' fish rods with bullet nose and hook attachments
(4) 1/4" diameter 6' fish rods with bullet nose and hook attachments
(5) 1/4" diameter 4' fish rods, (1) 3/16" diameter 5' glow rod
with bullet nose and hook attachments
4' (1.2 m)
6' (1.8 m)
12' (3.7 m)
24' (7.3 m)
25' (7.6 m)
1/4" (6.4 mm)
1/4" (6.4 mm)
1/4" (6.4 mm)
1/4" (6.4 mm)
1/4" and 3/16"
(6.4 and 5 mm)
0.3 lbs. (0.14 kg)
0.4 lbs. (0.18 kg)
1.05 lbs. (0.48 kg)
1.85 lbs. (0.84 kg)
1.8 lbs. (0.82 kg)
N/A
N/A
(6) 3/16" diameter 18" glow rods with bullet nose and hook attachments
(3) 3/16" diameter 5' glow rods with bullet nose and hook attachments
(3) 5/32" diameter 6' glow rods with bullet nose and hook attachments
5' (1.5 m)
6' (1.8 m)
9' (2.7 m)
15' (4.6 m)
18' (5.5 m)
3/16" (5 mm)
5/32" (3 mm)
3/16" (5 mm)
3/16" (5 mm)
5/32" (3 mm)
0.2 lbs. (0.09 kg)
0.2 lbs. (0.09 kg)
0.55 lbs. (0.25 kg)
0.85 lbs. (0.39 kg)
0.85 lbs. (0.39 kg)
Deluxe
Fish Rod
Kit
Illuminated
Fish Rod Tip
56119
56326
Cat. No. Description
Overall Length Weight (lbs./kg)
Cat. No. Description:
56326
75" (1,905 mm) 3.75 lbs. (1.7 kg)
56119
(2) 1/4" Dia. 6' and (2) 1/4 Dia. 4' Lo-Flex Fish Rods, (3)
3/16" Dia 5' Mid-Flex Glow Rods, (3) 5/32" Dia 6' Hi-Flex
Glow Rods, (1) hook and (1) bullet nose, and custom
zippered carrying case
Weight (oz./g)
bright white omni-directional long life LED light 5.0 oz. (142 g)
for maximum visibility in dark spaces
Conduit Benders
• Bold cast-in symbols, degree scales, multiplier scales
and center of bend marks help save time on the job.
• The traditional Benfield head design accurately and consistently
56207
®
performs common bends such as Stub Ups, Offsets, Back-to-Back and Saddle Bends.
Cat. No.
Description
Thinwall/EMT
Rigid/IMC
Weight (lbs./kg)
56206
56207
56208
56209
56210
56211
56203
56204
56205
51427
51428
51429
assembled aluminum conduit bender with #51427 handle
assembled aluminum conduit bender with #51427 handle
iron conduit bender head
iron conduit bender head
iron conduit bender head
iron conduit bender head
assembled iron conduit bender w/#51427 handle
assembled iron conduit bender w/#51427 handle
assembled iron conduit bender w/#51428 handle
conduit bender handle - 38" L, 3/4" NPT tap size fits 1/2" and 3/4" bender heads #56208 and #56209
conduit bender handle - 44" L, 1" NPT tap size fits 1" bender head for #56210
conduit bender handle - 54" L, 1-1/4" NPT tap size fits 1-1/4" bender head for #56211
1/2" (13 mm)
3/4" (19 mm)
1/2" (13 mm)
3/4" (19 mm)
1" (25 mm)
1- 1/4" (32 mm)
1/2" (13 mm)
3/4" (19 mm)
1" (25 mm)
N/A
N/A
N/A
−
1/2" (13 mm)
−
1/2" (13 mm)
3/4" (19 mm)
1" (25 mm)
−
1/2" (13 mm)
3/4" (19 mm)
N/A
N/A
N/A
4.4 lbs.
5.4 lbs.
2.1 lbs.
3.2 lbs.
5.5 lbs.
16.9 lbs.
5.5 lbs.
6.6 lbs.
11.6 lbs.
3.5 lbs.
6.0 lbs.
8.9 lbs.
(2.00 kg)
(2.45 kg)
(0.95 kg)
(1.45 kg)
(2.49 kg)
(7.67 kg)
(2.49 kg)
(2.99 kg)
(5.26 kg)
(1.6 kg)
(2.7 kg)
(4.0 kg)
3
NEW!
Low Voltage Wire Pulling NEW!
WIRESPANNERTM plus—Telescopic Pole
• Easily retrieve cable from a distance
without needing an extra pair of hands.
• Quick easy extension with friction-twist lock design.
• Stays locked in place and will not spin loose or collapse.
• Padded shoulder strap included.
Cat. No.
Description
SRS56036
WIRESPANNERTMplus - Telescopic Pole 18' (5.5 m)
SRS56036
Magnetic Wire Pulling System
Turn a two person
job into a one
person job.
• Route cables in enclosed spaces – through wall,
floor and ceiling voids by yourself.
• Innovative leader-pull design can navigate many obstructions.
• Swivel leader eyelet securely connects to most wires and
mesh wire pulling grips.
• Non-marring nylon leader-pull with 20' (6 m) of heavy-duty nylon rope.
• Convenient spool and protective storage tube.
Cat. No.
Description
SRS56037
Magnetic Wire Pulling System
SRS56037
Polymer Fish Rod Set with
Glow-in-the-Dark Leaders – 4.7'
• Non-conductive rods are great for short runs or
•
•
4
retrieving crowded cables in electrically sensitive
areas such as server panels.
Four 14" rods of varying flexibility and reflectivity for
a variety of individual (or 56" combined) applications.
Includes five glow-in-the-dark leaders.
Cat. No.
Description
SRS56038
Polymer Fish Rod Set with Glow-in-the-Dark Leaders – 4.7' (1.4 m)
SRS56038
Hook
Bullet
Mini-Eyelet
Domed-Eyelet
Claw
Holemaking
NEW!
Fast, superior cutting and longer
lasting performance at a great value!
Bi-Metal Hole Saws
• Optimized for cutting steel, including stainless steel.
• Cuts precise holes in stainless steel and mild steel,
drywall, ceiling tile, laminates, wood and plastic.
• Longest lasting, fastest cutting blade on the market.
• Heavy-duty steel construction includes 5 mil back plate to
withstand abuse.
• Hex-shaped base for easy removal from arbor.
Saw
Diameter
Pipe
Tap Size*
Pipe
Entrance Size**
31914
31918
31922
7/8" (22 mm)
1-1/8" (29 mm)
1-3/8" (35 mm)
3/4" (19 mm)
1" (25 mm)
–
1/2" (13 mm)
3/4" (19 mm)
1" (25 mm)
For use with
Arbor No.
31905
31905 or
31906
31928
1-3/4" (44 mm) 1-1/2" (38 mm) 1-1/4" (32 mm)
31932
2" (51 mm)
–
1-1/2" (38 mm)
31940
2-1/2" (64 mm)
–
2" (51 mm)
31944
2-3/4" (70 mm)
–
31906
31948
3" (76 mm)
–
2-1/2" (64 mm)
31958
3-5/8" (92 mm)
–
3" (76 mm)
31972
4-1/2" (114 mm)
–
4" (102 mm)
31900
6-3/8" (162 mm)
–
Bi-Metal Hole Saw Kit
8-Piece Kit includes 7/8", 1-1/8", 1-3/8", 1-3/4", 2" and 2-1/2"
31902
(22, 29, 35, 44, 51 and 64 mm) arbors and carrying case.
31922
Weight (lbs./kg)
.06 lbs. (.03 kg)
.08 lbs. (.09 kg)
.12 lbs. (.05 kg)
.12 lbs. (.05 kg)
.13 lbs. (.06 kg)
.17 lbs. (.08 kg)
.19 lbs. (.09 kg)
.22 lbs. (.10 kg)
.29 lbs. (.13 kg)
.40 lbs. (.18 kg)
2.00 lbs. (.91 kg)
* Pipe Tap Size – The sizes listed provide the necessary information whenever a pipe is to be threaded into tanks, boilers,
etc. To secure the best results, the hole should be reamed before tapping with a reamer having a taper of 3/4" per foot.
31918
31932
Cat. No.
**Pipe Entrance Size – The sizes listed provide the necessary information for any given pipe size to have sufficient clearance to pass through beams, walls, bulkheads, etc.
31914
Double-Fluted High-Speed Step Drill Bits
Wood Boring Bits with Screw Point
High-visibility silver step rings!
Easier to control and adjust shape on the fly.
• Faster drilling than single flute bits.
• Easy-to-read step rings save time when drilling common holes.
• Fast-starting, non-walking drill tip.
• Thick, extra-long 3/8" hex shank provides a firm, positive grip in the drill
• Superior to auger bits.
• Easy-to-sharpen blades.
• Easy-to-replace pilot screw shaft spin out.
• New low-torque design greatly reduces the wrist fatigue from standard auger bits.
• Unique head shape minimizes chatter while drilling versus ordinary paddle bits.
and won’t spin out.
53936
53932
53934
KTSB01
KTSB15
53938
KTSB11
Cat. No. Quick
No. of
Reference Holes
Increment Hole Size
Range
Weight
(lbs./kg)
Cat. No. Hole
Size
KTSB01
KTSB03
KTSB11
#1
#3
#11
13
9
2
1/32"
1/16"
–
.05 lbs. (.02 kg)
.15 lbs. (.07 kg)
.30 lbs. (.14 kg)
53932
7/8" (22 mm)
53934
1-1/8" (29 mm)
53936
1-3/8" (35 mm)
KTSB14
KTSB15
#14
#15
12
3
1/16"
–
.15 lbs. (.07 kg)
.46 lbs. (.21 kg)
53938
Replacement Shaft
1/8" – 1/2" (3 mm – 13 mm)
1/4" – 3/4" (6 mm – 19 mm)
7/8" – 1-1/8" (22 mm – 29
mm)
3/16" – 7/8" (5 mm – 22 mm)
7/8", 1-1/8", 1-3/8"
(22, 29, 35 mm)
Shaft
Dia.
Hex
End
Shaft
Length
Weight
(lbs./kg)
.28 lbs. (.13 kg)
3/8"
(9.5 mm)
5/16"
(8 mm)
6"
(152 mm)
.36 lbs. (.16 kg)
.39 lbs. (.18 kg)
.42 lbs. (.19 kg)
5
Digital Clamp Meters
NEW!
True RMS
Measurement
Technology
(except 3200 series)
Features
CL600
SELECT:
Durability
SELECT:
Instructions
Packaging
Drop Protection
CL700
CL800
CL2500/CL2500N*
SELECT:
Instructions
SELECT:
Instructions
Packaging
Packaging
6.6 ft. (2 m)
6.6 ft. (2 m)
CL3200/ CL3200N*
Instructions
Packaging
6.6 ft. (2 m)
SELECT:
Instructions
6.6 ft. (2 m)
IP42
IP30
IP40
IP40
CAT IV 600V
CAT IV 600V
CAT IV 600V
CAT IV 600V
CAT IV 600V
AC Voltage (Volts)
1000V
1000V
1000V
750V
750V
DC Voltage (Volts)
1000V
1000V
1000V
1000V
1000V
AC Current (Amps)
600A
600A
600A
1000A
200A
DC Current (Amps)
–
–
600A
1000A
–
Ohms (Resistance)
60MΩ
60MΩ
60MΩ
60MΩ
40MΩ
–
–
–
–
–
–
–
–
–
–
-14° – 1000°F
(-26° – 538°C)
-14° – 1000°F
(-26° – 538°C)
Ingress Protection
Safety
AC Millivolts
IP40
Packaging
3.3 ft. (1 m)
DC Millivolts
True RMS
Audible Continuity
Backlight
Temperature
Low Impedance
–
Non-Contact
Voltage Testing
–
Auto Ranging
Range Hold
Data Hold
Diode Test
Capacitance Test
Frequency / Duty Cycle
–
–
6000 µF
6000 µF
1Hz – 500 KHz
1Hz – 500 KHz
Available as
Accessory
Available as
Accessory
Available as
Accessory
–
–
–
–
–
6000
6000
6000
6000 µF
Max / Min
Magnetic Mount
Worklight
–
–
–
–
Auto-Power Off
Bar Graph
LCD Display Count
6
6000
4000
*A NIST certified product is guaranteed to have been specially tested to ensure its accuracy. These certified meters are special order
(lead time: 7 business days). NIST certifications are good for one year from the date of calibration.
See Warnings & Warranty page for important safety information regarding the test and measurement line.
Digital Multimeters & Infrared Thermometer
True RMS
NEW!
Measurement
Technology
(MM700 only)
Included with Multimeter:
Carrying Case
Test leads with
CAT III/CAT IV safety caps
Alligator clips
Thermocouple with adapter
Batteries
Features
•
•
•
•
•
Drop Protection
IR5
Infrared Thermometer
6.6 ft. (2 m)
6.6 ft. (2 m)
6.6 ft. (2 m)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
IP42
IP42
CAT IV 600V
CAT IV 600V
AC Voltage (Volts)
1000V
1000V
AC Voltage (Volts)
1000V
1000V
AC Current (Amps)
10A
10A
DC Current (Amps)
10A
10A
Ohms (Resistance)
40MΩ
40MΩ
Safety
Test & Measurement
Line Accessories NEW!
DC Millivolts
AC Milliamps
Replacement Test Lead Sets
• Safety Rating: Category IV 600V and
Category III 1000V.
• Screw-on alligator clips attach to wires and
other conductors.
• Replacement test leads for meters that have
standard, banana-type input jacks.
• Cat. No. 69410 replacement test-lead set for
MM600 and MM700.
• Cat. No. 69418 replacement test-lead set for
DC Milliamps
AC Microamps
DC Microamps
True RMS
–
Audible Continuity
Backlight
CL600, CL700, CL800.
Temperature
69418
Cat. No. Description
Overall Length
Weight (oz./g)
69410
41" (1,041 mm)
3.2 oz. (91 g)
41" (1,041 mm)
3.4 oz. (96 g)
69418
MM700
Durability
Ingress Protection
Replacement test lead set
- right angle inputs
Replacement test lead set
- straight inputs
MM600
Low Impedance
0° – 1000°F
(-18° – 538°C)
0° – 1500°F
(-18° – 816°C)
–
–
–
–
Auto Ranging
Range Hold
Data Hold
1000 μF
4000 μF
1Hz – 500 KHz
1Hz – 500 KHz
–
–
–
Available as
Accessory
Available as
Accessory
–
–
–
–
–
4000
4000
Diode Test
Capacitance Test
Magnetic Hanger
Frequency / Duty Cycle
• For use with Klein Tools MM600, MM700,
CL600, CL700, CL800.
• Durable nylon weave resists wear and tear.
• Constructed with powerful Rare Earth magnets.
• Has a secure loop & hook.
• Hanger allows the user to safely work hands-free.
Cat. No. Description
Weight (oz./g)
69417
1.1 oz. (31 g)
Magnetic hanger for electrician's
multimeters and select clamps
-22°– 752°F /
(-30° – 400°C)
Max / Min
Lead Warning
Bar Graph
Magnetic Mount
–
Auto-Power Off
Battery Test
69417
LCD Display Count
–
–
7
Electrical Testers
Non-Contact Voltage Testers (NCVT-1/NCVT-2)
• Non-contact detection of standard voltage (50-1000V AC) in cables, cords,
circuit breakers, lighting fixtures, switches, outlets and wires.
• High intensity, bright green LED and indicates the tester
is operational and illuminates the workspace.
• Microprocessor controlled low-battery indicator.
• "AutoPower-Off" feature conserves and extends battery life.
• Lightweight, durable polycarbonate plastic resin construction
with a convenient pocket-clip.
• 9.8 ft. (3 m) drop protection.
• CAT IV 1000V safety rating provides expanded operation and protection.
• Does NOT detect DC voltage.
NCVT-1
Additional Features for Dual Range NCVT-2
• Automatically detects and indicates low voltage
(12 - 48V AC) and standard voltage (50 - 1000V AC)
• Non-contact detection of low-voltage in security, entertainment,
NCVT-2
3TMV
communications, environmental control and irrigation systems.
Non-Contact Voltage Tester with Flashlight (NCVT-3) NEW!
• IP67: Dustproof and waterproof.
• 6.6 ft. (2 m) drop protection.
• CAT IV 1000V safety rating.
• Does NOT detect DC voltage.
• "AutoPower-Off" feature conserves and extends battery life.
• Pocket clip provides easy storage and quick access.
• Non-contact detection of voltage (12 – 1000V AC), with simultaneous visual
and audible voltage indicators.
• The visual indicator of the presence of voltage is an LED bar graph – the higher the voltage
sensed, or the closer to the voltage source, the more LEDs light up.
• Bright flashlight illuminates work area and may be used independent of voltage detection function.
NCVT-3
NCVT-2
Voltage
Range
12 - 48 V AC
(Low) NCVT-2 only
50 - 1000 V AC
(Standard)
Audible
Visual
low-pitched pulsing beeping sound
blue LED turns off and
red LED blinks (approximately
2x per second)
high-pitched continuous beeping sound
green LED turns off and
red LED illuminates continuously
Cat. No.
Voltage
Range
NCVT-1
NCVT-2
NCVT-3
50-1000V AC
12-1000V AC
Frequency
Range
50-500 Hz
Pollution
Degree
2
See Warnings & Warranty page for important safety information
regarding the test and measurement line.
8
24V
Batteries
2 x AAA
120V
~2"
(~51 mm)
Weight w/ Batteries
(oz./g)
1.6 oz. (46 g)
2.5 oz. (72 g)
LED bar graph indicates voltage strength.
5
10
15
20
25
30
35
40
IN.LB.
Torque Screwdriver Set
• Compact, easy to use set includes the torque
screwdriver plus six 3-1/2" power drivers.
• Tri-lobular design with a textured finish for better grip.
• Lightweight, aluminum frame.
• NIST traceable calibration certificate.
• Made in the U.S.A.
57032
Cat. No. Contains
Weight (lbs./kg)
57032
1.0 lbs. (0.45 kg)
Set includes six 3-1/2" (89 mm) power drivers: Phillips #1 and #2;
Slotted 3/16" (5 mm) and 1/4" (6 mm), and Square #1 and #2.
Torque Screwdrivers
& Wrenches
Micro-Adjustable Torque-Sensing
Wrenches with Square-Drive Ratchet Head
• Micro-adjustable for increased accuracy.
• Ratchet head allows speedy torquing and operation in confined working areas.
• Stainless steel handle for improved grip.
Cat. No. Drive Size Range
Length
Weight (lbs./kg)
57000
3/8"
15 – 75 ft-lb (20.4 – 101.7 Nm)
14-1/8" (359 mm)
2.00 lbs. (0.91 kg)
57005
3/8"
30 – 150 in-lb (3.4 – 16.9 Nm)
10-5/8" (270 mm)
1.20 lbs. (0.54 kg)
57010
1/2"
50 – 250 ft-lb (67.8 – 339.0 Nm)
24-1/4" (616 mm)
3.65 lbs. (1.66 kg)
57005
25-Piece Master Electrician’s Torque Tool Kit
• Piano hinged metal box includes latch with padlock eye and handle.
Cat. No.
Description
Weight (lbs./kg)
57060
Master Electrician's Torque Tool Kit
9.55 lbs. (4.33 kg)
Kit contains:
• Two micrometer-adjustable torque wrenches
• Nine hex-wrench bits
• Two 7/16" hex-wrench extensions
• One 7/16" female hex-wrench adapter (Coupler)
• One hex-to-square adapter for wrenches and one adapter for screwdrivers
• One adjustable torque screwdriver
• Seven screwdriver bits; five slotted, two Phillips
57060
9
Power Tool Accessories
MADE IN USA
Switch between handle
and drill in a snap!
IMPACT RATED!
IMPACT RATED!
MADE IN USA
Switch DriveTM Systems
•
•
•
Quick-Release mechanism converts power tool to hand tool in a snap.
Impact rated for the most aggressive power tools.
1/4" hex quick-connect for easy attachment.
CH
WIT
S
E
DRIV
EM
ST
SY
32701
32700
•
•
•
Easily alternate between power tool and hand tool.
Handle is also available separately: Cat. No. 32698.
Large Cushion-Grip handle for greater comfort and torque.
The handle's quick release mechanism easily switches any 1/4" hex accessory
between a power tool and hand tool.
Includes Switch Drive handle and three 2" (51 mm) magnetic power nut drivers
(1/4", 5/16", and 3/8").
Handle is also available separately: Cat. No. 32698.
Cat. No.
UPC 0-92644+
Description
32701
32701-8
Switch Drive™ Handle – Power Nut Driver Set
1/4"
5/16"
32700
32700-1
Switch Drive™ Handle with #2 Phillips and #2 Square Drivers
#2
32703
32704-9
Switch Drive™ Handle with #1 and #2 Phillips Drivers
32704
32703-2
Switch Drive™ Handle with #1 and #2 Square Drivers
32234
32234-1
Power Driver Set with Assorted Power Driver Bits
Power Conduit Reamer
• Reams 1/2", 3/4" and 1" conduit in a fraction of the time.
• Includes replaceable No. 2 square recess bit for installing conduit fittings.
• Designed to fit into power drill chucks and 1/4" quick release adapters.
Cat. No.
Included Tips
Driver Length
Overall Length
2" (51 mm)
7.75" (197 mm)
#2
6" (152 mm)
10.625" (270 mm)
#1
#2
6" (152 mm)
10.625" (270 mm)
#1
#2
6" (152 mm)
10.625" (270 mm)
#1 & #2
#1 & #2
3-1/2" (89 mm)
3-1/2" (89 mm)
Includes
Precision engineered
replaceable reaming blade
3/8"
1/4"
1/4" hex
quick connect
Description
85091
conduit reamer drill head for 1/2", 3/4" and 1" conduit
Replacement Parts
19353
conduit reamer replacement blade
SQ2-1-15
#2 square recess replacement bits (15-pack)
WARNING: Read and follow safety instructions in power tool owners manual.
10
•
•
•
85091
Power Tool Accessories
MADE IN USA
IMPACT RATED!
Multi-Bit Power Drivers
• Fits in Klein Switch Drive™ handle or any power tool.
• Multiple screwdriver and nut driver functions in one power tool adapter.
• Solid body with 1/4" hex quick connect for easy attachment to
any power drill.
Solid body with a 1/4" hex quick connect
32605
Patent
Pending
Includes one standard 1" bit and one double ended bit
Screwdriver
Cat. No.
Description
PH2
SQ2
Nut Driver
SL 3/16"
1/4"
5/16"
3/8"
9/16"
Overall Length
32605
5-in-1 Multi-Bit Power Driver
4.25" (108 mm)
32606
6-in-1 Multi-Bit Power Driver
5.00" (127 mm)
Double-Ended Replacement Bits
32744
Replacement Bit for 32605 (3-pack)
32745
Replacement Bit for 32606 (3-pack)
Power Nut Drivers
Cat. No.
Hex Sizes
10" (254 mm) Out-of-Chuck
PND71610
7/16"
PND1210
1/2"
PND91610
9/16"
5" (127 mm) Out-of-Chuck
PND7165
7/16"
PND125
1/2"
PND9165
9/16"
Hollow Depth
Overall Length
8-13/16" (223 mm)
8-23/32" (221 mm)
8-5/8" (219 mm)
11.32" (288 mm)
11.30" (287 mm)
11.33" (288 mm)
3-13/16" (97 mm)
3-23/32" (95 mm)
3-5/8" (92 mm)
6.32" (161 mm)
6.30" (160 mm)
6.33" (161 mm)
• Hollow shaft magnetic nut driver for long bolts, studs or threaded rod.
• Available in 5" and 10" lengths in 1/2", 9/16" and 7/16" sizes.
• 1/4" hex quick connect with wrench assist.
PND71610
WARNING: Read and follow safety instructions in power tool owners manual.
*Rare Earth magnet is globally sourced.
Hollow magnetic* shafts for long bolt studs or threaded rod jobs.
11
Safety Products
Personal Protective Equipment
Lights
Eyewear
Masks
Hats
Headlamp NEW!
• Anti-slip silicone strap keeps
•
•
150
150
Lumens
Lumens
6h
6h
50
50
Lumens
Lumens
10h
10h
Protective Eyewear
• Meets the traffic signal color
FL 1 STANDARD
66ftft
headlamp securely fastened
to hard hat.
Strap comes pre-adjusted for quick fit to hard hat.
45-degree tilt for varied beam direction to point light
where it is needed most.
Cat. No.
Lumens
56220
150 / 50
recognition requirements
of ANSI Z80.3-1996.
Run Time
Drop Height
Batteries
6 hrs / 10 hrs
6 ft.
3xAAA
Two Modes:
Spotlight
150
Lumens
6h
Floodlight
FL
1 STANDARD
69408
FL 1 STANDARD
150
Lumens
50
Lumens
6h
60060
56220
10h
Lens Color
Clear
Espresso
50
Advance Cap
• Glaregard™ under the brim reduces reflective glare.
®
warm air
flows out
Amber
Lens
Color
Environment
60046
black
dark gray
outdoor
10%
No
60047
black
SCT* gray outdoor
15%
Yes
60049
black
amber
90%
No
60053
black
clear
indoor/
outdoor
indoor
92%
No
60054
royal
blue
black
clear
indoor
92%
No
espresso
outdoor
15%
No
Frameless
60056 black
clear
indoor
92%
No
60057
espresso
outdoor
15%
No
60055
All backs contain the Klein logo with
American flag. Logo color varies depending on shell color.
SCT* Gray
Cat. No. Frame
Color
6 ft
10h
Lumens
Hats and Caps
• Type I helmet meets or exceeds ANSI Z89.1-2003 and
CSA Z94.1-2005 specifications for Class E.
6 ft by Safety Equipment Institute.
• Third Party Certified
Dark Gray
black
Visual Light
Transmitted
Accidental
Weight
Arc Protection (oz./g)
2.4 oz.
(68 g)
2.4 oz.
(68 g)
2.4 oz.
(68 g)
2.4 oz.
(68 g)
2.4 oz.
(68 g)
2.4 oz.
(68 g)
.15 oz.
(4.3 g)
.15 oz.
(4.3 g)
*SCT® = Spectrum Control Technology
Disposable Dust Masks
60025
cooling air
flows in
60027
WARNING: Dust masks are NOT SUITABLE for use against toxic or hazardous air contaminants.
If there is any doubt, consult an industrial hygienist.
white
blue
white
15 oz. (425 g)
15 oz. (425 g)
15 oz. (425 g)
Scope of Z89.1 – 2003 American National Standard for Head Protection
white
yellow
blue
14 oz. (397 g)
14 oz. (397 g)
14 oz. (397 g)
white
blue
13.4 oz. (380 g)
13.4 oz. (380 g)
Front Logo
Color
V-Gard Hard Hats ANSI Z89.1-2003 and CSA Z94.1-2005
none
none
lineman
Meet ANSI Z89.1-2003
none
none
none
V-Gard ® is a registered trademark of MSA, the safety company.
GlaregardTM is a trademark of, and Advance®, Fas-Trac®
are registered trademarks of MSA, the safety company.
12
Weight (oz./g)
box of 50 disposable dust masks 4.5 oz. (128 g)
Weight (oz./g)
Cat. No
60028
60030
60031
Standard Hard Hats
60009
60010
60011
Advance® Cap
60025
60027
Cat. No. Description
60080
60080
The most recent standard was approved in July 2003 and continues to cover requirements
for two types of impact-resistant helmets:
TYPE I (Top Impact) Helmets intended to reduce the force of an impact to the top of a
wearer’s head.
TYPE II (Top and Lateral Impact) Helmets intended to reduce the force of an impact resulting
from a blow received off-center or to the top of a wearer’s head. The new standard’s performance
requirements for Type I and Type II Helmets are equivalent to those specified in the 1998 revision.
Electrical Performance
CLASS E (Electrical) Helmets intended to reduce the danger of exposure to high-voltage
electrical conductors, proof-tested at 20,000 volts.
CLASS G (General) Helmets intended to reduce the danger of exposure to low-voltage electrical
conductors, proof-tested at 2,200 volts.
CLASS C (Conductive) Helmets not intended to provide protection from electrical conductors. The
electrical performance requirements in the 2003 standard are identical to those in the 1997 standard.
Safety Products
Personal Protective Equipment
Gloves
Tapes
Cleaning Towels
Lockout Tabs
Gloves
Cat. No. Description
Size
Weight (oz./g)
40021
40022
40023
40016
40017
40018
40003
40004
40006
40014
40015
40072
40074
40080
40082
40084
40086
40008
40010
40012
40008
40010
40012
40002
40001
medium
large
extra large
medium
large
extra large
small
medium
large
large
extra large
large
extra large
medium
large
extra large
2XL
large
large
extra large
large
large
extra large
fits most hand sizes
lined version
3.5 oz. (99 g)
3.7 oz. (105 g)
4 oz. (113 g)
5.8 oz. (164 g)
6.1 oz. (173 g)
6.6 oz. (187 g)
4.8 oz. (136 g)
6.4 oz. (181 g)
6.9 oz. (196 g)
7.5 oz. (213 g)
8.2 oz. (232 g)
7.4 oz. (210 g)
7.7 oz. (218 g)
7.4 oz. (210 g)
8.2 oz. (232 g)
8.8 oz. (249 g)
9.4 oz. (266 g)
7.7 oz. (218 g)
7.7 oz. (218 g)
7.7 oz. (218 g)
7.7 oz. (218 g)
7.7 oz. (218 g)
7.7 oz. (218 g)
2.4 oz. (40 g)
2.6 oz. (42 g)
cowhide
cowhide
cowhide
cowhide lined
cowhide lined
cowhide lined
cowhide driver's
cowhide driver's
cowhide driver's
cowhide driver's-lined
cowhide driver's-lined
electrician's
electrician's
lineman work
lineman work
lineman work
lineman work
medium-cuff
long-cuff
long-cuff
medium-cuff
long-cuff
long-cuff
heavy weight jersey
heavy weight jersey
Barricade and Warning Tapes
40072
40022
40003
40010
40002
Klein Kleaners®
Hand Cleaning Towels
Cat. No.
Container Size
Weight (lbs./kg)
51425
72-count bucket
2.45 lbs. (1.11 kg)
51425
58000
Cat.
No.
Description
Length
Weight
(oz./g)
58000
CAUTION – CAUTION legend
w/blk letters/yellow background
CAUTION – CAUTION legend
w/blk letters/yellow background
CAUTION – BURIED ELECTRIC LINE
legend w/blk letters/red bk-grnd
CAUTION – BURIED ELECTRIC LINE
legend w/blk letters/red bk-grnd
200'
(61 m)
1000'
(305 m)
200'
(61 m)
1000'
(305 m)
14.4 oz.
(408 g)
58 oz.
(1644 g)
13 oz.
(369 g)
56 oz.
(1588 g)
58001
58002
58003
Lockouts with Interlocking Tabs
• Specifically designed for locking out power sources
such as disconnects, switches, and panel boxes.
• Double interlocking hasp of tempered steel with
patented interlocking tabs for extra security.
• Holes will accept up to 5/16” (8 mm) diameter shackles.
WARNING: Use only in accordance with OSHA requirements.
45201
Cat. No.
Description
Weight (oz./g)
45200
45201
1" (25 mm) lockout w/interlocking tabs closed hasp I.D.
1-1/2" (38 mm) lockout w/interlocking tabs closed hasp I.D.
3.2 oz. (90 g)
4 oz. (113 g)
13
TM
Gloves
Personal Protective Equipment
Constructed with the latest high-quality materials,
the new Journeyman™ Gloves provide ample
comfort and functionality.
Trek Dry™ is a trademark of Mechanix Wear, Inc. • Mossy Oak ® & Breakup Infinity™ are registered trademarks of Haas Outdoors Inc.
Thinsulate™ is trademark of 3M • PORON ® is a registered trademark of Rogers Corp. • Armortex ® is a registered trademark of Armortex, Inc.
Extreme Gloves
• PORON padding material
Utility Gloves
• Moisture wicking and
®
•
•
in the palm to absorb
impact and vibration.
Rubberized fingertips
for extra grip.
Wrist closure with hook
and loop secures fit.
breathable Trek Dry™
stretch material
on top with sponge
foam and tricot lining
for maximum comfort.
40206
40218
Medium
Cat. No. 40217
Large
Extra-Large
Weight (oz./g)
40218
40219
5.4 oz. (153 g)
Medium
Cat. No. 40205
Camouflage Gloves
• Mossy Oak Break-Up
Infinity pattern.
• Moisture wicking and
Large
Extra-Large
Weight (oz./g)
40206
40207
2.1 oz. (60 g)
Large
Extra-Large
Weight (oz./g)
40212
40213
4.6 oz. (130 g)
Cold Weather
Pro Gloves
• Palm and fingers lined
with Thinsulate™ C40.
• Water resistant nylon back
lined with Thinsulate™ C100.
• Durable rubberized palm
®
™
breathable Trek Dry™
stretch material on top
with sponge foam and
tricot lining for
maximum comfort.
40209
•
provides water resistance
and grip with 2mm
EVA foam padding for
impact protection.
5 mm EVA foam knuckle for
impact protection and comfort.
40212
Medium
Cat. No. 40208
Large
Extra-Large
Weight (oz./g)
40209
40210
2.7 oz. (77 g)
Medium
Cat. No. 40211
Grip Gloves
• Armortex rubberized grip on
Leather Gloves
• Genuine professional
grade leather.
• Flexible yet impact absorbing
®
•
•
•
14
the fingers with reinforced
synthetic leather palms and
thumb for ample grip in
both wet and dry
conditions.
PORON® padding material
in the palm to absorb
impact and vibration.
Moisture wicking and
breathable Trek Dry™ stretch
material on top with sponge
foam and tricot lining for
maximum comfort.
Flexible yet impact absorbing thermo plastic rubber
(TPR) protects the fingers and back of the hand.
Medium
Cat. No. 40214
•
•
thermo plastic rubber (TPR)
protects the fingers and
back of the hand.
Moisture wicking and
breathable Trek Dry™ stretch
material on top with sponge
foam and tricot lining for
maximum comfort.
Machine washable.
40215
Large
Extra-Large
Weight (lbs./kg)
40215
40216
4.6 oz. (130 g)
40221
Medium
Cat. No. 40220
Large
Extra-Large
Weight (oz./g)
40221
40222
4.8 oz. (136 g)
Insulated Tools
Durable, three component molded insulation
provides protection against electric shock.
For Safety on
the Job
Thick, exceptionally tough,
high-dielectric white inner
coating is bonded to the tool.
Custom,
US-made
tool steel.
Forged steel handle.
Multi-color, sleek design with small thumb
guards for ease of handling and storage.
A flame retardant, impact-resistant, multi-color outer coating.
High-Leverage
Side-Cutting Pliers
Long-Nose Pliers
­Side-Cutting
High-Leverage
Diagonal Cutting Pliers
213-9NE-EINS
203-8-EINS
2000-28EINS
Cat. No.
Nose Type
High-Leverage Side-Cutting Pliers
213-8NE-EINS
New England
213-9NE-EINS
New England
2000-9NE-EINS*
New England
Long-Nose Pliers - Side-Cutting
203-6-EINS
Long
203-7-EINS
Long
203-8-EINS
Long
High-Leverage Diagonal Cutting Pliers
2000-28-EINS*
tapered
2000-48-EINS*
angled
Combination Pliers
12098-EINS
tapered
Overall Length
Weight (lbs./kg)
8-13/16" (224 mm)
9-5/8" (245 mm)
9-5/8" (245 mm)
.74 lbs. (0.34 kg)
.74 lbs. (0.34 kg)
.74 lbs. (0.34 kg)
6-7/8" (175 mm)
7-3/8" (187 mm)
8-7/8" (225 mm)
.30 lbs. (0.14 kg)
.35 lbs. (0.16 kg)
.69 lbs. (0.31 kg)
8-1/4" (210 mm)
8-1/4" (210 mm)
.74 lbs. (0.34 kg)
.74 lbs. (0.34 kg)
8-1/4" (210 mm)
.86 lbs. (0.39 kg)
~
MADE IN USA
Combination Pliers
12098-EINS
High-Leverage
Cable Cutter
63050-EINS
Tongue &
Groove Pliers
502-10-EINS
*Cuts ACSR, screws, nails, and most hardened wire. Features combination polished and black-oxide finish.
Overall Length
Weight (lbs./kg)
High-Leverage Cable Cutter
63050-EINS
4/0 aluminum, 2/0 soft copper, 100pair 24 AWG communications cable
Cat.No.
Cuts Up to
9-5/8" (245 mm)
1.01 lbs.
(0.39 kg)
Cat. No.
Max. Jaw Capacity
Overall Length
Weight (lbs./kg)
Tongue & Groove Pliers
502-10-EINS
1-3/4" (44 mm)
10-1/4" (260 mm)
1.06 lbs.
(0.48 kg)
Cat. No.
Strips and Cuts
Overall Length
Weight (lbs./kg)
Solid & Stranded Stripper
11054-EINS
2
2
8 – 16 AWG solid (8.4 mm – 1.3 mm ) 10-1/4" (260 mm)
& 10 – 182 AWG stranded
(5.3 mm – .82 mm2)
Solid & Stranded
Stripper
11054-EINS
.47 lbs.
(0.16 kg)
Tools meet or exceed IEC 60900: 2012, ASTM F1505, and VDE standards. They are clearly marked
with the official 1000-volt rating symbol.
®
8 −16
AWG
8 AWG
10 −1
15
Insulated Tool Sets
For Safety on the Job
Thick, exceptionally tough, high-dielectric
white inner coating is bonded to the tool.
Forged steel handle.
MADE IN USA
Custom,
US-made
tool steel.
A flame retardant, impact-resistant,
bright orange outer coating.
General-Purpose
22-Piece Tool Kit
8-Piece Tool Kits
• Highly durable, black nylon case
•
features: nylon-zipper closure,
polypropylene handles,
custom-fitted tool pockets.
Replacement case available
(Cat. No. 33536).
• The custom case includes 3
•
Cat. No. Kit Contains
Basic
33526
2 Side-Cutters
1 Diagonal-Cutter
2 Cabinet-Tip Screwdrivers
Premium
33529 1 2000 Series Side Cutter
1 Side-Cutter
1 2000 Series Diagonal-Cutter
1 Cable Cutter
*See website for specific SKUs
Weight (lbs./kg)
6.90 lbs. (3 kg)
1 Phillips-Tip Screwdriver
1 Cable Cutter
1 Wire Stripper/Cutter
•
pallets with fitted pockets for
each tool.
Piano-hinged cover has both a
combination lock and two keylocked latches for security.
Storage space behind the pallets
to keep important papers and
accessory items.
33527
Cat. No. Kit Contains
1 Klein-Kurve Wire Stripper/Cutter
2 Cabinet-Tip Screwdrivers
1 Phillips-Tip Screwdrivers
6.90 lbs. (3 kg)
Utility 13-Piece Tool Kits
Weight (lbs./kg)
22-Piece Tool Kit
33527 5 Side-Cutters
3 Diagonal-Cutters
1 Pump Plier
6 Assorted Cabinet-Tip Screwdrivers
3 Phillips-Tip Screwdrivers
1 Wire Stripper/Cutter
1 Cable Cutter
1 Linemans Skinning Knife
1 Crimping/Cutting Tool
24.30 lbs.
(11 kg)
*See website for specific SKUs
9-Piece Driver Kits
• Highly durable, nylon case
33525SC
• (Cat No. 33525SC) The light, compact, soft roll-up carry case
protective storage with custom-fitted pockets for each tool.
• (Cat No. 33525) The custom case includes two pallets with custom-fitted
33525
provides
pockets for each tool, piano-hinged case cover has both a combination
lock and two key-locked latches for security, storage space behind the
pallets to keep important papers and accessory items.
Cat. No. Kit Contains
16
Weight
(lbs./kg)
13-Piece Insulated Utility Kit with custom carrying case
33525
1 2000 Series Side-Cutter
20.05 lbs.
1/4", 5/16", 3/8" Cabinet-Tip Screwrivers
(4.4 kg)
2 Long-Nose Side-Cutters
#1, #2, #3 Phillips-Tip Screwdrivers
2 2000 Series Diagonal-Cutters
1 Cable Cutter
1 Pump Pliers
1 Lineman's Skinning Knife
Hard Shell carrying case (33535)
13-Piece Utility Insulated Tool Kit with roll up case
33525SC Same as 33525 but has a light, compact, soft roll-up case/w shoulder strap (33535SC) 6.90 lbs.
(3 kg)
*See website for specific SKUs
features: nylon-zipper closure,
polypropylene handles, customfitted tool pockets, extra pocket
is provided for storage of papers
or other items.
33528
Cat. No. Kit Contains
Screwdriver Kit
33528 3/16" (2x), 1/8", 1/4", 5/16", 3/8" Cabinet-Tips
#1, #2, #3 Phillips-Tips
1 custom heavy-duty carrying case (33538)
6" Hollow Shaft Nut Driver Kit
33524 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", and 5/8" sizes
1 custom heavy-duty case (33534)
*See website for specific SKUs
All Insulated screwdrivers must follow these warnings.
Weight
(lbs./kg)
5.40 lbs.
(2.4 kg)
6.00 lbs.
(2.7 kg)
Cable Cutters
Standard Cable Cutters
• Replaceable hook-jaw blades grab
•
•
•
and hold cable while shear-cutting
action makes clean cuts.
Exceptionally strong fiberglass handles
with comfortable, slip resistant grips.
Lightweight, yet efficient shear-type cable cutters.
Not designed for cutting steel or ACSR.
63041TH
Ratcheting Cable Cutters
• Plastic covered handles with hand guards for comfort and firm grip.
• High-leverage ratchet mechanism for easier cutting.
• Patented two-step ratchet mechanism requires fewer strokes per cut.
• Cat No. 63700 cuts steel and ACSR 5/8" (16 mm) dia. steel wire rope, 1/2"
63700
(13 mm) dia. steel rod (C.R.S. SOFT).
63750
63060
Maximum Cable Capacity
Cat. No.
Copper
Standard Cable Cutters
63041
500 MCM (250 mm2)
63041TH* 500 MCM (250 mm2)
63045
1000 MCM (500 mm2)
900-pair soft copper and aluminum
63047
Ratcheting Cable Cutters
63060
400 MCM (185 mm2)
63711
600 MCM (300 mm2)
1000 MCM (500 mm2)
63750
750 MCM (400 mm2)
63607
400 MCM (300 mm2)
63700
750 MCM (400 mm2)
63800ACSR 1-1/4" (32 mm)
Replacement Cable Cutter Heads (complete)
63081
63090
63858
63110
Aluminum
ACSR
Guy Strand
Communication Cable
Overall Length
Weight (lbs./kg)
25-1/2" (648 mm)
25-1/2" (648 mm)
32" (813 mm)
37" (940 mm)
5.25 lbs. (2.4 kg)
5.25 lbs. (2.4 kg)
8.00 lbs. (3.6 kg)
8.55 lbs. (3.9 kg)
750 MCM (400 mm2)
750 MCM (400 mm2)
1200 MCM (600 mm2)
up to 2-1/4" (57 mm) diameter
–
–
–
–
–
–
–
–
1-3/8" (35 mm) dia.
1-3/8" (35 mm) dia.
1-3/4" (44 mm) dia.
1-3/4" (44 mm) dia.
600 MCM (300 mm2)
750 MCM (400 mm2)
Frequent Use: 1000 MCM (500 mm2)
Frequent Use: 750 MCM (400 mm2)
600 MCM (300 mm2)
750 MCM (400 mm2)
1" (25 mm)
–
–
–
–
–
–
1-1/8" (28 mm)
1-1/8" (28 mm)
2-1/16" (52 mm)
10-1/4" (260 mm) 1.32 lbs. (.60 kg)
11-1/2" (292 mm) 2.00 lbs. (.91 kg)
12-1/8" (308 mm) 1.76 lbs. (.80 kg)
336 MCM (170 mm2)
1-1/4" (32 mm) dia., ACAR
477 MCM (273 mm2)
–
7/16" (11 mm) dia.
1/2" (13 mm)
–
10-1/4" (260 mm) 1.50 lbs. (.68 kg)
28" (711 mm)
14.00 lbs. (6.4 kg)
13-3/4" (349 mm) 3.20 lbs. (1.5 kg)
–
Fits Klein Cat. No.
63041 and 63041TH
63045
63800ACSR
63047
2.05 lbs. (.93 kg)
3.20 lbs. (1.5 kg)
*With protective rubber sleeves.
WARNING: Do NOT use to cut steel or ACSR if it is not indicated in the chart.
17
Bolt Cutters
Heavy-Duty Ratcheting Bolt Cutter
• The spring-loaded cable retention hook snaps NEW!
•
•
onto the cable in one hands-free motion and
prevents individual steel strands from slipping
out of the cutting jaws.
Cuts 1/2" (12.7 mm) utility-grade guy strand and
3/8" (9.5 mm) EHS.
Lockplate reinforcement prevents jaw
bolts from loosening or turning, keeps
jaws in correct alignment.
Bolt Cutters
• Forged, alloy tool steel jaws are precision
ground for sure, efficient cutting and long life.
• All purpose, center-cut jaws for soft, medium
63RBCHD
and hard materials.
63318
63314
WARNING: NOT for cutting cable.
Cat. No.
Overall Length
Heavy Duty Steel Handle Bolt Cutters
63RBCHD
31" (787 mm)
Steel Handle Bolt Cutters***
63314
14" (356 mm)
63318
18" (457 mm)
63324
24" (610 mm)
63330
30" (762 mm)
63336
36" (914 mm)
63342
42" (1067 mm)
Fiberglass Handle Bolt Cutters***
63118
18-1/4" (464 mm)
63124
24-1/2" (622 mm)
63130
30-1/2" (775 mm)
63136
36-1/2" (927 mm)
* Up to Brinell 300, Rockwell C31.
** Up to Brinell 400, Rockwell C42.
***Replacement parts and blades available.
18
Soft & Medium Cutting
Maximum Capacities*
Hard Material Cutting Maximum Capacities**
Weight (lbs./kg)
1/2" (12.7 mm) utility-grade guy strand 3/8" (9.5 mm) EHS
10.9 lbs. (4.9 kg)
5/16" (8 mm)
3/8" (10 mm)
7/16" (11 mm)
1/2" (13 mm)
9/16" (14 mm)
11/16" (18 mm)
3/16" (5 mm)
1/4" (6 mm)
5/16" (8 mm)
3/8" (10 mm)
7/16" (11 mm)
1/2" (13 mm)
3.15 lbs. (1.4 kg)
3.55 lbs. (1.6 kg)
6.30 lbs. (2.9 kg)
10.20 lbs. (4.6 kg)
14.25 lbs. (6.5 kg)
19.20 lbs. (8.7 kg)
3/8" (10 mm)
7/16" (11 mm)
1/2" (13 mm)
9/16" (14 mm)
1/4" (6 mm)
5/16" (8 mm)
3/8" (10 mm)
7/16" (11 mm)
3.65 lbs. (1.7 kg)
6.13 lbs. (2.8 kg)
9.50 lbs. (4.3 kg)
12.95 lbs. (5.9 kg)
­—
Reference Guide
Cat. No.
UPC # 0-92644+ Description
56000
56001
56002
56003
56004
56005
56006
56007
56008
56013
56055
56056
56057
56058
56059
56065
56125
56240
56000-2
56001-9
56002-6
56003-3
56004-0
56005-7
56006-4
56007-1
56008-8
56013-2
56055-2
56056-9
56057-6
56058-3
56059-0
56065-1
56125-2
56240-2
25' Steel Fish Tape
50' Steel Fish Tape
65' Steel Fish Tape
125' Steel Fish Tape
240' Steel Fish Tape
25' Steel Fish Tape
100' Steel Fish Tape
125' Stainless Steel Fish Tape
240' Stainless Steel Fish Tape
50' Spiral Steel Fish Tape
100' Multi-Groove Fiberglass Fish Tape – 7" leader
200' Multi-Groove Fiberglass Fish Tape– 7" leader
50' Non-Conductive Multi-Groove Fiberglass Fish Tape
100' Non-Conductive Multi-Groove Fiberglass Fish Tape
200' Non-Conductive Multi-Groove Fiberglass Fish Tape
65' Steel Replacement Fish Tape
125' Steel Replacement Fish Tape
240' Steel Replacement Fish Tape
56108-5
56110-8
500' Poly Pull Line
6500' Poly Pull Line
Pull Line
56108
56110
Lubricants
51100
51100-4
Foam Wire Pulling Lubricant - 19 oz. can
Splinter-GuardTM Fish and Glow Rods
56119
56304
56306
56312
56324
56325
56326
56405
56406
56409
56415
56418
56119-1
56304-1
56306-5
56312-6
56324-9
56325-6
56326-3
56405-5
56406-2
56409-3
56415-4
56418-5
Illuminated Fish Rod Tip
4' Lo-Flex Fish Rod
6' Lo-Flex Fish Rod
12' Lo-Flex Fish Rod Set
24' Lo-Flex Fish Rod Set
25' Fish and Glow Rod Set
Deluxe Fish Rod Kit
5' Mid-Flex Glow Rod
6' Hi-Flex Glow Rod
9' Mid-Flex Glow Rod Set
15' Mid-Flex Glow Rod Set
18' Hi-Flex Glow Rod Set
Conduit Benders
51427
51428
51429
56203
56204
56205
56206
56207
56208
56209
56210
56211
51427-2
51428-9
51429-6
56203-7
56204-4
56205-1
56206-8
56207-5
56208-2
56209-9
56210-5
56211-2
Handle for 1/2" & 3/4" EMT Benders
Handle for 1" EMT Benders
Handle for 1-1/4" EMT Benders
Iron Bender w/ Handle – 1/2" EMT
Iron Bender w/ Handle – 3/4" EMT
Iron Bender w/ Handle – 1" EMT
Aluminum Bender w/ Handle – 1/2" EMT
Aluminum Bender w/ Handle – 3/4" EMT
1/2" Iron Conduit Bender Head
3/4" Iron Bender Head
1" Iron Bender Head
1-1/4" Iron Bender Head
Super Rod Series Low Voltage Wire Pulling
ALL NEW!
SRS56036 56036-1
WIRESPANNERTMplus - Telescopic Pole 18'
SRS56037 56037-8
Magnetic Wire Pulling System
SRS56038 56038-5
Polymer Fish Rod Set with Glow-in-the-Dark Leaders – 4.7'
ELECTRICAL TEST AND MEASUREMENT
69410
69410-3
NEW!
Replacement test lead set - right angle inputs
69417
69417-2
Magnetic hanger for multimeters & clamp meters NEW!
69418
69418-9
NEW!
Replacement test lead set - straight inputs
CL600
69014-3
Digital Clamp Meter
NEW!
CL700
69015-0
Digital Clamp Meter
NEW!
CL800
69016-7
Digital Clamp Meter
NEW!
CL2500
69207-9
Cat. No.
UPC #0-92644+ Description
ELECTRICAL TEST AND MEASUREMENT CON'T
WIRE PULLING
1000A AC/DC TRMS Clamp Meter
CL2500N
CL3200
CL3200N
IR5
MM600
MM700
NCVT-1
NCVT-2
NCVT-3
69707-4
69208-6
69708-1
69030-3
69022-8
69023-5
69000-6
69002-0
69008-2
1000A AC/DC TRMS Clamp Meter w/ NIST Cert.
200A AC Fork Tester
200A AC Fork Tester w/ NIST Cert.
Dual-laser Infrared Thermometer
Digital Multimeter
Digital Multimeter
Non Contact Voltage Tester
Dual Range Non-Contact Voltage Tester
Non Contact Voltage Tester with Flashlight
NEW!
NEW!
NEW!
NEW!
B O LT C U T T E R S A N D C A B L E C U T T E R S
63041
63045
63047
63060
63118
63124
63130
63136
63314
63318
63324
63330
63336
63342
63601
63607
63700
63711
63750
63041TH
63800ACSR
63RBCHD
63041-5
63045-3
63047-7
63060-6
63118-4
63124-5
63130-6
63136-8
63314-0
63318-8
63324-9
63330-0
63336-2
63342-3
63601-1
63607-3
63700-1
63711-7
63750-6
63004-0
63002-6
63067-5
25" Standard Cable Cutter
32" Standard Cable Cutter
Communications Cable Cutter
Ratcheting Cable Cutter
18-1/4" Fiberglass Handle Bolt Cutter
24-1/2" Fiberglass Handle Bolt Cutter
30-1/2" Fiberglass Handle Bolt Cutter
36-1/2" Fiberglass Handle Bolt Cutter
14" Steel Handle Bolt Cutter
18" Steel Handle Bolt Cutter
24" Steel Handle Bolt Cutter
30" Steel Handle Bolt Cutter
36" Steel Handle Bolt Cutter
42" Steel Handle Bolt Cutter
Compact Ratcheting Cable Cutter
Small ACSR Cable Cutter
Ratcheting Cable Cutter – Heavy-Duty
Open Jaw Cable Cutter
Ratcheting Cable Cutter
25" Standard Cable Cutter w/ Rubber Sleeves
ACSR Ratcheting Cable Cutter
31" Heavy-Duty Ratcheting Bolt Cutter
NEW!
POWER TOOL ACCESSORIES
19353
32605
32606
32700
32701
32703
32704
32744
32745
85091
PND1210
PND71610
PND91610
SQ115
SQ1355
SQ162
SQ2115
SQ2355
SQ262
SQ315
SQ3355
SQ362
85703-4
32605-9
32606-6
32700-1
32701-8
32703-2
32704-9
32744-5
32745-2
85091-2
32754-4
32755-1
32753-7
32729-2
32730-8
32731-5
32732-2
32733-9
32734-6
32735-3
32736-0
32737-7
Conduit Reamer Replacement Blade
5-in-1 Multi-Bit Power Driver
6-in-1 Multi-Bit Power Driver
2 Power Driver Bits & Handle
3 Assorted Power Nut Drivers
2 Phillips Power Driver Bits & Handle
2 Square Recess Power Driver Bits & Handle
Replacement Blade for 32605 (3-Pack)
Replacement Blade for 32606 (3-Pack)
Power Conduit Reamer
1/2 Power Nut Driver – 10"
7/16 Power Nut Driver – 10"
9/16 Power Nut Driver – 10"
#1 Square Insert Power Drivers – 1" Bit
#1 Square Power Drivers – 3-1/2"
#1 Square Power Drivers – 6"
#2 Square Insert Power Drivers – 1" Bit
#2 Square Power Drivers – 3-1/2"
#2 Square Power Drivers – 6"
#3 Square Insert Power Drivers - 1" Bit
#3 Square Power Drivers – 3-1/2"
#3 Square Power Drivers – 6"
NEW!
ALL NEW!
WORK @ HEIGHT PLIERS
Pliers
Diagonal-Cutting
High-Leverage
72037-6
D228-8TT
High-Leverage Diagonal-Cutting Pliers—Angled Head
72049-9
D248-9STT
High-Leverage Side-Cutters
70104-7
D213-9NETT
High-Leverage Ironworker's Pliers
70087-3
D213-9STT
Ironworker's Pliers
70102-3
D201-7CSTT
19
Reference Guide
Cat. No.
UPC # 0-92644+ Description
Cat. No.
PERSONAL PROTECTIVE EQUIPMENT
51425
58003
60080
51425-8
58003-1
60080-7
Klein Hand Cleaning Towels
1000' CAUTION/BURIED ELECTRIC LINE Tape
Disposable Dust Masks
60101-9
60102-6
60103-3
60104-0
60106-4
60108-8
60109-5
60111-8
60114-9
60115-6
60116-3
60117-0
60118-7
60121-7
60122-4
40023-0
60003-6
60004-3
60006-7
60007-4
60008-1
60062-3
40205-0
40206-7
40207-4
40208-1
40209-8
40210-4
40211-1
40212-8
40213-5
40214-2
40215-9
40216-6
40217-3
40218-0
40219-7
40220-3
40221-0
40222-7
Lined Heavyweight Jersey Gloves
Heavyweight Jersey Gloves
Cowhide Driver's Glove - S
Cowhide Driver's Glove - M
Cowhide Driver's Glove - L
Medium-Cuff Gloves - L
Long-Cuff Gloves - L
Long-Cuff Gloves - XL
Lined Cowhide Driver's Gloves - L
Lined Cowhide Driver's Gloves - XL
Lined Cowhide Work Gloves - M
Lined Cowhide Work Gloves - L
Lined Cowhide Work Gloves - XL
Cowhide Work Gloves - M
Cowhide Work Gloves - L
Cowhide Work Gloves - XL
Electrician's Gloves - L
Electrician's Gloves - XL
Lineman Work Glove – Medium
Lineman Work Glove – Large
Lineman Work Glove - Extra Large
Lineman Work Glove – XXL
JourneymanTM Utility Gloves - M
JourneymanTM Utility Gloves - L
JourneymanTM Utility Gloves - XL
JourneymanTM Camouflage Gloves - M
JourneymanTM Camouflage Gloves - L
JourneymanTM Camouflage Gloves - XL
JourneymanTM Cold Weather Pro Gloves - M
JourneymanTM Cold Weather Pro Gloves - L
JourneymanTM Cold Weather Pro Gloves - XL
JourneymanTM Grip Gloves - M
JourneymanTM Grip Gloves - L
JourneymanTM Grip Gloves - XL
JourneymanTM Extreme Gloves - M
JourneymanTM Extreme Gloves - L
JourneymanTM Extreme Gloves - XL
JourneymanTM Leather Gloves - M
JourneymanTM Leather Gloves - L
JourneymanTM Leather Gloves - XL
PERSONAL PROTECTIVE EQUIPMENT CON'T
60030
60031
Protective Eyewear
60046
60046-3
60047
60047-0
60049
60049-4
60053
60053-1
60054
60054-8
60055
60055-5
60056
60056-2
60057
60057-9
Hard Hats and Accessories
56220-4
56220
20
45200
45201
58000
58001
58002
60009-8
60010-4
60011-1
Headlamp
Standard Hard Cap, White
Standard Hard Cap, Yellow
Standard Hard Cap, Blue
60025
60027
60025-8
60027-2
Advance® Hard Cap, White
Advance® Hard Cap, Blue
60028
60028-9
V-Gard® Hard Hat, White
V-Gard® Hard Hat, Blue
V-Gard® Hard Hat, White
45200-0
45201-7
58000-0
58001-7
58002-4
Lockouts w/Interlocking Tabs
Lockouts w/Interlocking Tabs
200' CAUTION Tape
1000' CAUTION Tape
200' CAUTION/BURIED ELECTRIC LINE Tape
I N S U L AT E D T O O L S A N D K I T S
203-6-EINS
203-7-EINS
203-8-EINS
213-8NE-EINS
213-9NE-EINS
502-10-EINS
33524
33525
33526
33527
33528
33529
11054-EINS
12098-EINS
2000-28-EINS
2000-48-EINS
2000-9NE-EINS
33525SC
63050-EINS
71048-3
71049-0
71047-6
70192-4
70193-1
73001-6
33524-2
33525-9
33526-6
33527-3
33528-0
33529-7
74010-7
70191-7
72007-9
72008-6
70194-8
33015-5
63013-2
6" Long Nose Side-Cutting Pliers
7" Long Nose Pliers Side-Cutting Pliers
8" Long Nose Heavy-Duty Side-Cutting Pliers
9" High-Leverage Side-Cutting Pliers
9" High-Leverage Side-Cutting Pliers
10" Tongue & Groove Pliers
9-Piece Insulated Nut Driver Set – 6" Shafts
Utility Insulated Tool Kit
Basic Insulated 8-Piece Tool Kit
Insulated 22-Piece General-Purpose Tool Kit
Cushion-Grip Insulated Screwdriver Kit
Premium Insulated 8-Piece Tool Kit
8-16 AWG Solid & 10-18 AWG Stranded Wire Stripper
Combination Pliers
8" High-Leverage Diagonal-Cutting Pliers – Tapered Head
8" High-Leverage Diagonal-Cutting Pliers – Angled Head
9" High-Leverage Side-Cutting Pliers Heavy-Duty Cutting
Utility Insulated 13-Piece Tool Kit w/ Roll-Up Case
High-Leverage Cable Cutter
HOLEMAKING
Bi-Metal Hole Saws
Saw Diameter
31900
31914
31918
31922
31928
31932
31940
31944
31948
31958
31972
6-3/8" (162 mm)
7/8" (22 mm)
1-1/8" (29 mm)
1-3/8" (35 mm)
1-3/4" (44 mm)
2" (51 mm)
2-1/2" (64 mm)
2-3/4" (70 mm)
3" (76 mm)
3-5/8" (92 mm)
4-1/2" (114 mm)
31900-6
31914-3
31918-1
31922-8
31928-0
31932-7
31940-2
31944-0
31948-8
31958-7
31972-3
Bi-Metal Hole Saw Kit
31902
31902-0
Step Drill Bits
KTSB01
KTSB03
KTSB11
KTSB14
KTSB15
Standard Eyewear – Dark Gray Lens
Standard Eyewear – SCT Gray Lens
Standard Eyewear – Amber Lens
Standard Eyewear – Clear
Standard Eyewear – Clear
Standard Eyewear – Espresso
Frameless Eyewear – Clear
Frameless Eyewear – Espresso
60009
60010
60011
60030-2
60031-9
Lockouts, Barricade Tape and Cleaners
Gloves
40001
40002
40003
40004
40006
40008
40010
40012
40014
40015
40016
40017
40018
40021
40022
40023
40072
40074
40080
40082
40084
40086
40205
40206
40207
40208
40209
40210
40211
40212
40213
40214
40215
40216
40217
40218
40219
40220
40221
40222
UPC #
Description
0-92644+
NEW!
ALL NEW!
8-Piece Kit
Hole Range Size
59101-3
59103-7
59111-2
59114-3
59115-0
Hole Size
53932
53934
53936
53938
7/8" (22 mm)
1-1/8" (29 mm)
1-3/8" (35 mm)
Replacement Shaft
TORQUE WRENCHES AND SCREWDRIVERS
57032
57000
57005
57010
57060
57032-2
57000-1
57005-6
57010-0
57060-5
ALL NEW!
1/8" – 1/2" (3 mm – 13 mm)
1/4" – 3/4" (6 mm – 19 mm)
7/8" – 1-1/8" (22 mm – 29 mm)
3/16" – 7/8" (5 mm – 22 mm)
7/8", 1-1/8", 1-3/8" (22, 29, 35 mm)
Wood Boring Bits
53932-9
53934-3
53936-7
53938-1
ALL NEW!
Torque Screwdriver Set
3/8" Torque Wrench
3/8" Torque Wrench
1/2" Torque Wrench
Master Electrician’s Torque Tool Kit
ALL NEW!
Warnings and Warranty
Test and Measurement
Warning
WARNING:
Always wear approved eye protection.
Do NOT use to pry.
NOT insulated. Plastic-dipped or slip-on
plastic handles are NOT intended for
protection against electrical shock.
Never use on or near live electrical circuits.
Do NOT extend
handle length.
Use a safe work position
to avoid loss of balance.
Do NOT use to push
or hammer.
Do NOT use to chisel.
Fish Tapes
WARNING: Never remove screws while fish tape is coiled inside reel.
Insulated Tools
• To ensure safe operation and service of the tester, follow these instructions. Failure to
observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring a known voltage or current.
• N
ever use a meter on a circuit with voltages that exceed the category based rating of the meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from the metal probe contacts
when making measurements.
• Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch
circuits may be energized when disconnected and must be retested before handling.
• Do not open the meter to replace batteries while the probes are connected.
• Use caution when working with voltages above 60V DC, or 25V AC RMS.
Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock, replace batteries
if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out power before measuring
resistance or capacitance.
• Always adhere to local and national safety codes. Use individual protective equipment to
prevent shock and arc blast injury where hazardous live conductors are exposed.
Non-Contact Voltage Tester (Additional Warnings)
WARNING: Only use tools that are marked with the official international
1000-volt rating symbol shown below, if there is any chance that the tools
will make contact with an energized source.
WARNING:
WARNING: Wear approved eye protection. Always inspect your tools before use. Do not use
if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through
orange layer.
WARNING: Do NOT touch uninsulated portion of the tool or any conductive object when either
might contact an energized source.
WARNING: Because moisture, films, or other surface contaminants are conductive, Klein
insulated tools must be kept clean, dry, and free of any surface contaminants.
Personal Protective Equipment
(Hard Hats, Eyewear, Accessories)
WARNING: It is important that users of these products read, understand, and follow all instructions,
cautions, and warnings that are attached to and/or packed with the product.
Infrared Thermometer
CAUTION: Reflective materials may be hotter than indicated. Laser radiation-Do NOT stare
into beam. Class 2 laser product.
See www.kleintools.com/warranty for more information.
Warranty Returns
All warranty returns must include a Warranty Return Authorization (WRA) number. The WRA
for the U.S. can be obtained by calling Customer Service at 1-800-553-4676.
(International call 1-847-821-5500) or email [email protected]
• Use caution with voltages above 30V AC as a shock hazard may exist.
• A single blinking LED or a steady glowing LED and an audible beep indicate voltage present. If
no indication, voltage could still be present.
• Before and after each use, verify operation by testing a known working circuit that is within the
rating of this unit.
• The tester WILL NOT detect voltage if:
• The wire is shielded.
• The operator is not grounded or is otherwise isolated from an effective earth ground.
• The voltage is DC.
• The tester MAY NOT detect voltage if:
• The user is not holding the tester.
• The user is insulated from the tester with a glove or other materials.
• The wire is partially buried or in a grounded metal conduit.
• The tester is at a distance from the voltage source.
• The field created by the voltage source is being blocked, dampened, or otherwise interfered with.
• The frequency of the voltage is not a perfect sine wave between 50 and 500Hz.
• The tester is outside of operation conditions (listed in Specifications section).
• Operation may be affected by differences in socket design and insulation thickness and type.
• In bright light conditions, the LED visual indicators will be less visible.
• Do not use if "power on" LED is not illuminated.
• Do not use if tester appears damaged or is not operating properly. If in doubt, replace the tester.
• Do not apply more than the rated voltage as marked on the tester (1000V).
• Detection above 12V is specified under "normal" conditions as specified below. The tester may
detect at a different threshold at different conditions, or may not detect at all unless:
• The tip of the tester is within 0.25" of an AC voltage source radiating unimpeded.
• The user is holding the body of the tester with his or her bare hand.
• The user is standing on or connected to earth ground.
• The air humidity is nominal (50% relative humidity – non-condensing).
• The tester is held still.
• Always wear approved eye protection.
• Comply with local and national safety requirements.
• If this product is used in a manner not specified by the manufacturer, protection provided
by the product may be affected.
• Do not attempt to repair this tester. It contains no serviceable parts.
• Do not expose the product to extremes in temperature or high humidity.
Warranty
Klein products in this catalog, manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for the normal life of the product.
This warranty does not apply, for example, to damage from alterations, abuse, accidents, misuse, lack of maintenance, or normal wear and tear. With the exception of: I. Electronic Test &
Measurement products (see warranty below); and II. Ratcheting and Drill-Operated Cable Cutters, which are warranted for one year from the date of purchase. The following consumable
products are warranted to be free from defects in materials and workmanship when delivered to the customer: Triple-Taps, Drill Bits, Step Drills, Carbide Hole Cutters, Hole Saws and Arbors;
Saw Blades and Jab Saws; disposable Razor and Knife Blades; Stripper Cartridges, Replaceable Cutting Inserts, Bits and Blades; Hand Cleaners and Wire Pulling Lubricant. THERE ARE NO
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. At its option Klein will repair or replace, or refund the purchase price of, any product which fails to conform to this warranty
under normal use and service. In no event shall Klein be liable for incidental or consequential damage.
If your Klein product requires repair or for information on how to exercise your rights under the terms of this warranty, please contact Klein Tools at 1-800-553-4676.
Electronic Test & Measurement Warranty
Klein electronic test and measurement devices (and accessories), manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and
workmanship for two years from the date of purchase (unless otherwise noted on the product packaging). THERE ARE NO IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS. At
its option, Klein will repair or replace, or refund the purchase price of, any product which fails to conform to this warranty under normal use and service. In no event shall Klein be liable for
incidental or consequential damage. This warranty does not apply to batteries.
Specifications of all products in this catalog are subject to change without notice.
Dimensions shown for all forged products in this catalog are as precisely accurate as possible, but subject to very slight variations that are unavoidable in forging and grinding operations.
Dimensions of Klein forged tools and all other tools and equipment are always within commercial tolerances recognized for such products.
21
go mobile!
Text KLEIN to
37527 for mobile
alerts and
chances to
win FREE
tools
subscribe
to Klein’s Social Media
Channels
Tradesman tv
for tool reviews from fellow
tradesmen @
kleintools.com/
tradesmantv
D
E
T
C
E
N
N
O
C
Y
STA
TRADESMAN
CLUB
join the Tradesman Club
at www.kleintradesmanclub.com
for newest products, innovations
and chances to win FREE tools
Get Rewarded
for Your
Loyalty!
learn about klein tools
From adjustable wrenches to zipper
bags @ kleintools.com/AtoZ
www.kleintools.com
Get 1 point for each
dollar spent. Use your
points to redeem for
Klein merchandise
96240 Rev. C 04/16
© 2016 Klein Tools, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement