advertisement
▼
Scroll to page 2
13 Water Moments For fixing hand strap Strap Hook 3. Explanation of the status icons IMPORTANT - Don’t open the battery door under water. - Close the battery door properly for best water sealing. - Rinse by clean water after use and keep it dry for storage. 1. Key features of your camcorder Item 1 Function Description Photograph mode Recording mode Video mode 1 2 USB interface For transferring images and video files to computer via USB cable. Card slot Inserting micro SD card for digital files storage. HDMI socket Use supplied HDMI cable for HDTV connection. LCD screen LCD shows images, video clips, camera Settings and Menu. 3 Menu Button 4 Mode Button 5 OK button Zoom button 6 Volume setup button Up / Down button Press to Set PICTURE / VIDEO recording options. Press this button to select mode: PICTURE taking or VIDEO recording. Press this button to take still PICTURE; to Start or Stop recording VIDEO clip, To confirm changes (OK) in menu mode. Zoom IN or OUT during recording mode. Setting the volume in video playback mode. In MENU mode, push the key up/down for UP / DOWN selection In photo mode ,press this button to enter the Playback PICTURE mode, In video mode press this button to enter the Playback VIDEO mode. 1. Pressing and hold the power button to turn on& off the unit. 2. Pressing this button to select icons display. 7 Playback button 8 Power Button 9 Battery door 10 Lens Optical lens for Video & Picture taking 11 Speaker Speaker for video playback 12 Microphone For voice input 2x AA alkaline batteries provided 00 ~ 64 Default Setting Format Yes / No Yes / No English / Deutsch / French / Italian / Spanish / Dutch/ Portuguese / CHS / CHT / Russian 2 Selected resolution 3 Self timer On / Off 4 Battery indicator Battery is full Empty battery 5 Zoom indicator Shows zoom range 6 White balance White balance selection. 7 SD card indication The SD card is inserted and will be used as storage for PHOTO and VIDEO 8 Counter indicator Shows available time for recording VIDEO Shows active recording VIDEO time Shows picture available in PHOTO mode Self-timer Refresh the default settings Format the SD card Select display language Off / High / Low Setting the beep sound volume. S.image S.sound File number Slide Show Pause On / Off On / Off Reset / Sequential Setting the opening screen on or off. Setting the opening sound on or off. 10s / 5s / 3s / Off Setting the image slide time. 50Hz 60Hz Set for European electricity frequency Set for American electricity frequency FW Version See the firmware version Effect In photo/video mode, pressing the MENU button and select EFFECT by pressing the down button, then pressing OK to enter effect options. ISO Metering White Balance Auto/Landscape/Portrait/ Sport/Night landscape Auto / 200 / 400 Center / Average / Spot Auto Sunny Cloudy Fluorescent Incandescent Effects Sharpness EV Setting Negative / Normal/ B/W / Sepia Standard / Hard / Soft 0, +/-0.3 , +/-0.7, +/-1.0, +/-1.3, +/-1.7, +/-2.0 Choose an existing Picture control Sensitivity select Metering setting Automatic white balance White balance selected for Sunny sky White balance selected for cloudy sky White balance selected for fluorescent indoor light White balance selected for tungsten indoor lighting Effects setting Sharpness setting Level of exposure Note: The camera will remain in the last setting when it is turned OFF and ON again PHOTO setting In photo mode, pressing the MENU button and select PHOTO, then pressing the OK button to enter photo setup mode. Super Fine/ Fine(Default) / Quality PHOTO quality setting Normal 2048 x 1536 pixels 3M pixel resolution 2592 x 1944 pixels Size 5M pixel resolution 8M pixel resolution Select picture review time after photo taking. Setting the volume Beep Sound Scene Photo-3M, 5M, 8M Video-720P30, WVGAP60, WVGAP30, VGA, QVGA 4. Details for camera setting Function Volume Frequency 2. Functional parts Item Part 3s / 1s / 0.5s / Off Language After used this camcorder under water, the voice recording quality will be affected as there still has water inside the mic and speaker compartment. The sound will be resumed to normal once water dry out. HD digital video camcorder –1280x720 16:9 ratio@30fps HDTV HDMI high definition interface output 2.0” fine grade LTPS color LCD display Slot for Micro SD Memory card, support up to 16GB SD card capacity Driver free for Windows 7 / Vista / XP and MAC 10.4.9 or above Quick view 5. Using the camera 5.1 Battery installation 1. 2. 3. Release and open the battery door. Install supplied 2x AA alkaline batteries into the battery compartment. Align battery terminals with metal connectors inside compartment. Close the battery door. 3200 x 2400 pixels On Self-timer selected, 10 sec delay Off Turn off the self-timer, disable VIDEO setting In video mode, pressing the MENU button and select VIDEO, then pressing the OK button to enter video setup mode. Super Fine(Default)/ Fine / VIDEO quality setting Quality Normal 720P30 1280x720, up to 30fps WVGAP60 848x480, up to 60fps Resolution WVGAP30 848x480, up to 30fps VGA 640x480, up to 30fps QVGA 320x240, up to 30fps Setup In photo/video mode, pressing the MENU button and select SETUP by pressing the down button, then pressing the OK button to enter camera basic setup options. NTSC American and Japanese TV format TV type PAL European TV format Off Auto Power-Off off 1 min Auto power off in 1 min if no operation Auto power off 3 min Auto power off in 3 min if no operation 5 min Auto power off in 5 min if no operation Year / Month / Day / Hour / Setting the time on the image or video Time setup Minute clips. 5.2 Inserting a memory card (not included ) You must insert Micro SD Card (not supplied) to record and store your VIDEO and PICTURES. Follow the instruction for inserting a Micro SD Memory card: 1. 2. Turn OFF the camera. Insert the Micro SD card into the Micro SD card slot, gently press it down until card is latched. Make sure that the Micro SD card is not in LOCK position (see tiny slider on card’s side). Note: Do not force the card into the slot; forcing may damage camera and the Micro SD memory card. Align Micro SD card position (as marked) and try again. 1. Note: The Micro SD memory card must be formatted before taking photographs. See the following instruction. 2. 3. 4. 5. In PHOTO / VIDEO mode, Press the PLAYBACK button ( ) to enter PICTURES / VIDEO Playback mode. Pressing the UP ( ) / DOWN ( ) button to select desired PICTURE / VIDEO. Pressing the OK button to confirm selected VIDEO or see full size PICTURE. When viewing video clips, Press the OK button to start playing the video and press again to pause. When playing the video, press the UP ( ) / DOWN ( ) buttons for fast forward or rewind the VIDEO. 5.8 Delete photographs and video clips 1. 2. 3. 4. 5.3 Formatting the SD memory card If your SD card is new, or it was used with other cameras or devices, you need to FORMAT the card, see simple steps below. If card was previously used, save all needed images & video first. 1. In photo/video mode, press the MENU button and select SETUP, then press OK to enter camera basic setup options. 2. Select FORMAT by pressing the UP ( ) button and press the OK button. ) button. Select YES by pressing the UP ( 3. Press the OK button to confirm formatting the Micro SD card. In PHOTO / VIDEO mode, Press the PLAYBACK button ( ) to enter PICTURES / VIDEO Playback mode. Select the photo or video to delete. Press the MENU button to enter the delete mode. ) / DOWN ( ) buttons for select delete current image(YES) or delete Pressing the UP ( all images and press the OK button to confirm. Pressing the MODE button to exit. 6. Connecting the HD DV camcorder 6.1 Connect to TV When you wish to view on High Definition (HD) TV, please use supplied HDMI cable and connect as shown below: White balance Auto / Sunny / Cloudy / Fluorescent / Incandescent VIDEO format MOV External memory card Support up to 16GB SD memory card ( card is required to store video & pictures, class 4 or above SD card is recommended ) File format VIDEO: MOV ; PICTURE: JPEG Self timer PC interface 10 second options Power source 2x AA alkaline batteries TV-out High Definition VIDEO: HDMI Standard TV (NTSC or PAL) output: HDMI USB 2.0 port 8. PC system min requirement Operating System Windows 7 / Vista / XP Mac 10.4.9 or above CPU Pentium III / 1GHz (minimum) Pentium 4 / 3.0GHz or above processor (recommended) RAM At least 256MB (minimum) 1GB (recommended) Interface USB available port Display Card nVidia Geforce 7600 or ATI X 1600 or above 9. Troubleshooting Problem Cause Solution Cannot turn ON the camcorder 1. Low battery power. 2. Battery not inserted properly. 1. Replace with new 2x AA alkaline batteries. 2. Check that battery correctly aligned when installed VIDEO or PICTURES cannot be saved when you are taking them. 1. Micro SD card has not been installed 2. The Micro SD card has not been formatted properly. 3. Memory is full. Display shows ‘MEMORY FULL’. 1. Install Micro SD card 2. Format the Micro SD card at SETUP mode of the camera. Please refer to section 5.3. 3. Download the pictures and videos from the camera to the computer to create storage space. Computer does not recognize your camcorder when connected. (You cannot find removable disk) Connection failure. Make sure all cable connections are secured. Restart the computer if necessary. Upload to YouTube The battery life is very short. Incorrect or old, used up, battery Replace with new 2x AA alkaline batteries. Please install MEDIAIMPRESSION. This software enables upload to YouTube. This will take you directly to YouTube website for easy upload of videos. Blurry images 1. The HD camera is not held steady during recording 2. The lens of HD DV camera is dirty. 1. Hold the HD DV camera steady when taking pictures, wait to hear the beep sound 2. Clean the lens with soft dry cloth. Note: During formatting of the Micro SD card, all data, pictures & video (if present) will be erased; make sure you save your valuable records before formatting the memory. Remember, all your records will be erased during formatting! 5.4 Setting the resolution VIDEO recording mode 1. Press the MENU button in video mode,Select VIDEO and press the OK button to enter options selection. ) button, then press the OK button to enter 2. Select RESOLUTION by pressing the UP ( resolution selection. ) / DOWN( ) buttons; 3. Select desired resolution by pressing the UP ( 720P30 (1280 x 720), WVGAP60 (848 x 480), WVGAP30 (848 x 480), VGA (640 x 480), QVGA (320 x 240) then press the OK button to confirm setting. PICTURE taking mode 1. Press the MENU button in photo mode, Select PHOTO and press the OK button to enter option selection. 2. Select the SIZE by pressing the UP ( ) button, press the OK button to enter resolution selection. 3. Select desired resolution by pressing the UP ( ) / DOWN( ) buttons; 3M (2048 x 1536), 5M (2592 x 1944), 8M (3200 x 2400) then press the OK button to confirm setting. Turn on your camera. Press the MODE button to select PICTURES ( ) or VIDEO recording mode( ) Use the LCD screen as a viewfinder composing the scene. Press the OK button for taking a PICTURE, or press this button to start / stop VIDEO recording. Note: 1. Keep camera and the object steady when making records to avoid blurry images. 2. Max video file size is 4GB.The unit will stop recording automatically. 5.6 Zoom IN and OUT ) / DOWN ( You may also connect your HD camcorder to PC for viewing PICTURES and VIDEOS on the computer monitor as well as expanding your system to enjoy a wide range of functions. You may edit your videos or images and send them to friends over the Internet or even post your own VIDEOS on YouTube! Millions of people may view them! Installing DirectX and ArcSoft MediaImpression 2. 3. 4. Please insert provided CD into computer’s CD ROM and follow screen prompts to install DirectX and MediaImpression in your computer Use USB cable to connect HD camcorder to computer Open My Computer> Removable Disk and select image or video file Click to open and watch High definition video played back. You may also install QuickTime (not bundled on supplied CD) or other suitable programs for best video playback. HD Video data is very complex; use Win XP, Vista, MAC 10.4.9 and newest computers – older and slower computers may not play your HD Video clips so well. Image Sensor 5.0 Mega pixel CMOS sensor ) buttons for selecting desired scene / view. 720P30 (1280x720), up to 30fps Note the zoom bar in screen showing the zooming range. Resolution QVGA 30fps VGA 30fps WVGA 30fps WVGA 60fps 720P 30fps For more information please visit www.my-hyundai.de 7. Specification Your camera can zoom in up to 3 X Pressing the UP ( 6.2 Connect to Personal computer 1. 5.5 Taking video or pictures 1. 2. 3. 4. Set your HDTV to corresponding HDMI INPUT (review TV Manual if needed) and use camera buttons in the same way as you use camera during PLAYBACK mode. Enjoy watching pictures and HD VIDEO on large HDTV screen! WVGAP60 (848x480), up to 60fps Digital zoom 3X 3X 3X 3X 3X 5.7 Playback PICTURES and VIDEO clips VIDEO WVGAP30 (848x480), up to 30fps VGA (640x480), up to 30fps Resolution QVGA (320x240), up to 30fps PICTURES 8.0 Mega pixel (3200x2400) 5.0 Mega pixel (2592x1944) 3.0 Mega pixel (2048x1536) Lens F/2.8 f=8.5mm LCD display 2.0” fine grade LTPS color LCD display For EU only AM-DV5H1-GB-BHS-1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project