OpenScape Office V3 myPortal for Desktop

OpenScape Office V3   myPortal for Desktop
myPortal for Desktop, User Guide
P31003P1030U102017619
05/2012
Siemens Enterprise Communications GmbH & Co. KG.
2012
Documentation
OpenScape Office V3
myPortal for Desktop
User Guide
A31003-P1030-U102-13-7619
Siemens Enterprise Communications
www.siemens-enterprise.com
Our Quality and Environmental Management
Systems are implemented according to the
requirements of the ISO9001 and ISO14001
standards and are certified by an external certification
company.



Copyright © Siemens Enterprise
Communications GmbH & Co. KG 05/2012
Hofmannstr. 51, D-80200 München
Siemens Enterprise Communications GmbH & Co. KG 
is a Trademark Licensee of Siemens AG
Reference No.: A31003-P1030-U102-13-7619
The information provided in this document contains
merely general descriptions or characteristics of
performance which in case of actual use do not always
apply as described or which may change as a result of
further development of the products. An obligation to
provide the respective characteristics shall only exist if
expressly agreed in the terms of contract. Availability
and technical specifications are subject to change
without notice.
Siemens Enterprise Communications
www.siemens-enterprise.com
OpenScape, OpenStage and HiPath are registered
trademarks of Siemens Enterprise
Communications GmbH & Co. KG. 
All other company, brand, product and service names
are trademarks or registered trademarks of their
respective holders.
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.1 myPortal for Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.2 New Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.3 Types of Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.4 Display Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1.5 User Interface Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
1.6 Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2 Installing and Starting myPortal for Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Prerequisites for UC PC Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 How to Install myPortal for Desktop (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 How to Install myPortal for Desktop (Mac OS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4 How to Start myPortal for Desktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5 How to Exit myPortal for Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6 How to Uninstall myPortal for Desktop (Windows). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.7 How to Uninstall myPortal for Desktop (Mac OS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8 Automatic Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8.1 How to Perform Automatic Updates (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8.2 How to Perform Automatic Updates (MAC OS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.9 Upgrading to OpenScape Office V3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
20
21
21
23
23
24
24
25
25
25
3 First Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 How to Select the User Interface Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 How to Select the Language of the Voicemail Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3 How to Record your Name Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 How to Record your Personal Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5 How to Specify an E-Mail Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.6 How to Create a Favorites List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7 How to Enable the Import of Outlook Contacts at Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27
28
28
28
29
30
30
31
4 Unified Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.1 Presence Status and CallMe Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.1.1 Presence Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4.1.1.1 How to Change the Presence Status to Absent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.1.1.2 How to Change the Presence Status to Office . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.1.1.3 How to Add Info Text for your Presence Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.1.1.4 How to Enable or Disable Automatic Resetting of the Presence Status . . . . . . . . . . . . . . . . . . . . 38
4.1.1.5 How to Change the Visibility of your Presence Status for Others . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.1.1.6 How to Enable or Disable Automatic Updating of the Presence Status via Outlook Appointments39
4.1.1.7 How to Enable or Disable the Automatic Creation of Outlook Appointments when Absent . . . . . 39
4.1.1.8 How to Enable or Disable Screen Pops on Changing the Presence Status . . . . . . . . . . . . . . . . . 40
4.1.2 CallMe Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
4.1.2.1 How to Enable the Call-Me Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4.1.3 Status-based Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.1.3.1 How to Configure Status-based Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.1.4 Rule-Based Call Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4.1.4.1 How to Add a Call Forwarding Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
4.1.4.2 How to Edit a Call Forwarding Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
3
Contents
4.1.4.3 How to Copy a Call Forwarding Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4.1.4.4 How to Rename a Call Forwarding Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
4.1.4.5 How to Remove a Call Forwarding Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.1.4.6 How to Change the Order of Call Forwarding Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
4.2 Directories and Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.2.1 Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4.2.1.1 How to Search in Directories (Classic User Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
4.2.1.2 How to Search in Directories (Modern User Interface). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.2.1.3 How to Sort a Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.2.1.4 How to Perform a Quick Search by Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
4.2.1.5 How to Zoom in on an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.2.1.6 How to Add a Personal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
4.2.1.7 How to Edit a Personal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.2.1.8 How to Delete a Personal Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
4.2.1.9 How to Enable or Disable the Import of Outlook Contacts at Startup. . . . . . . . . . . . . . . . . . . . . . . 55
4.2.2 Favorites list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
4.2.2.1 How to Add a Group to the Favorites List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
4.2.2.2 How to Rename a Group in the Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4.2.2.3 How to Delete a Group from the Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4.2.2.4 How to Add a Contact to the Favorites List (Classic User Interface) . . . . . . . . . . . . . . . . . . . . . . . 58
4.2.2.5 How to Add a Contact to the Favorites List and Personal Contacts (Modern User Interface) . . . . 58
4.2.2.6 How to Delete a Contact from the Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4.2.2.7 How to Change the Sorting of the Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
4.2.2.8 How to Specify a Default Number for a Favorite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4.2.2.9 How to Change the Width of the Favorites List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
4.2.3 Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.2.3.1 How to Sort the Journal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4.2.3.2 How to Group Journal Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
4.2.3.3 How to Delete Journal Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
4.2.3.4 How to Change the Retention Period for Journal Entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
4.2.3.5 How to Add a Scheduled Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
4.2.3.6 How to Edit a Scheduled Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.2.3.7 How to Clear a Scheduled Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.2.3.8 How to Add Contacts from the Journal to the Personal Directory . . . . . . . . . . . . . . . . . . . . . . . . . 67
4.2.3.9 How to Configure the Journal Export . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
4.2.3.10 How to Export the Journal Manually. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.3 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.3.1 Call Number Formats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.3.2 Call Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4.3.2.1 How to Answer a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4.3.2.2 How to Pick up a Call for Another Subscriber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
4.3.2.3 How to Redirect a Call to your Voicemail Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
4.3.2.4 How to Dial a Number Manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
4.3.2.5 How to Call from a Directory (Classic User Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
4.3.2.6 How to Call from a Directory (Modern User Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
4.3.2.7 How to Make a Call from the Favorites List (Classic User Interface) . . . . . . . . . . . . . . . . . . . . . . . 72
4.3.2.8 How to Make a Call from the Favorites List (Modern User Interface). . . . . . . . . . . . . . . . . . . . . . . 73
4.3.2.9 How to Make a Call from the Journal (Classic User Interface). . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
4.3.2.10 How to Make a Call from the Journal (Modern User Interface) . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.3.2.11 How to Transfer a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.3.2.12 How to Place a Call on Hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
4.3.2.13 How to Record a Call or a Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
4
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Contents
4.3.2.14 How to Start Web Collaboration During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.3.2.15 How to End a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.3.3 Desktop Dialer and Clipboard Dialer (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.3.3.1 How to Make a Call via the Desktop Dialer or Clipboard Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . 77
4.3.3.2 How to Enable or Disable the Desktop Dialer or Clipboard Dialer . . . . . . . . . . . . . . . . . . . . . . . . 78
4.3.3.3 How to Change the Key Combination for the Desktop Dialer or Clipboard Dialer . . . . . . . . . . . . 78
4.3.4 Screen Pops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
4.3.4.1 How to Enable or Disable Screen Pops on Inbound Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
4.3.4.2 How to Enable or Disable the Opening of the Main Window on Inbound Calls. . . . . . . . . . . . . . . 83
4.3.4.3 How to Enable or Disable Screen Pops on Outbound Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
4.3.4.4 How to Enable or Disable the Closing of Screen Pops at the End of a Call . . . . . . . . . . . . . . . . . 84
4.3.4.5 How to Enable or Disable Screen Pops for New Voicemails . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
4.3.4.6 How to Enable or Disable Screen Pops for New Fax Messages . . . . . . . . . . . . . . . . . . . . . . . . . 85
4.3.4.7 How to Enable or Disable the Opening of the Messages Window for New Voicemails . . . . . . . . 86
4.3.4.8 How to Enable or Disable the Opening of the Messages Window for New Fax Messages . . . . . 86
4.3.4.9 How to Enable or Disable the Screen Pop with an Overview on Starting myPortal for Desktop. . 87
4.4 Conferencing (not with OpenScape Office HX) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
4.4.1 Ad-hoc Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
4.4.1.1 How to Configure and Initiate an Ad-hoc Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
4.4.1.2 How to Display your Own Ad-hoc Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
4.4.1.3 How to Add Conference Participants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
4.4.1.4 How to Disconnect a Conference Participant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
4.4.1.5 How to Reconnect Conference Participants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.4.1.6 How to Remove Conference Participants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
4.4.1.7 How to Specify another Conference Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
4.4.1.8 How to End an Ad-hoc or Scheduled Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
4.4.1.9 How to Repeat an Ad-hoc Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
4.4.1.10 How to Delete an Ad-hoc Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
4.4.2 Scheduled Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
4.4.2.1 How to Configure a Scheduled Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
4.4.2.2 How to Display your Own Scheduled Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
4.4.2.3 How to Determine the Dial-in Number for a Scheduled, Permanent or Open Conference . . . . . 104
4.4.2.4 How to Determine the Conference ID for a Scheduled or Permanent Conference. . . . . . . . . . . 104
4.4.2.5 How to Change the Password for a Scheduled or Permanent Conference . . . . . . . . . . . . . . . . 105
4.4.2.6 How To Display a Scheduled, Permanent or Open Conference as the Conference Controller . 106
4.4.2.7 How to Extend a Scheduled Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
4.4.2.8 How to Reschedule a Scheduled Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
4.4.2.9 How to Delete a Scheduled or Open Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
4.4.2.10 How to Reschedule a Conference Appointment for a Conference Series . . . . . . . . . . . . . . . . 107
4.4.2.11 How to Delete a Conference Appointment for a Conference Series . . . . . . . . . . . . . . . . . . . . . 108
4.4.3 Permanent Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
4.4.3.1 How to Configure a Permanent Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
4.4.3.2 How to Display your Own Permanent or Open Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
4.4.3.3 How to Delete a Permanent Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
4.4.4 Open Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
4.4.4.1 How to Configure an Open Conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
4.4.5 Web Collaboration Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
4.5 Voice and Fax Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
4.5.1 Voicemail Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
4.5.1.1 How to Determine the Call Number for your Voicemail Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
4.5.1.2 How to Select Recording or Announcement Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
4.5.1.3 How to Record an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
5
Contents
4.5.1.4 How to Import an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
4.5.1.5 How to Delete an Announcement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
4.5.1.6 How to Enable or Disable the Announcement of your Presence Status for External Callers. . . . 122
4.5.1.7 How to Enable or Disable the Announcement of your Presence Status for Specific Callers . . . . 123
4.5.1.8 How to Grant or Deny the Attendant Permission to Retrieve Voicemail and Fax Messages . . . . 124
4.5.1.9 How to Activate or Deactivate the Password Prompt for the Voicemail Box . . . . . . . . . . . . . . . . 124
4.5.1.10 How to Select the Language of the Voicemail Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
4.5.2 Managing Voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
4.5.2.1 How to Listen to a Voice Message on the Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
4.5.2.2 How to Listen to a Voice Message on the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
4.5.2.3 How to Call the Sender of a Voice Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
4.5.2.4 How to Forward a Voicemail Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
4.5.2.5 How to Move a Voice Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
4.5.2.6 How to Save a Voice Message as a WAV File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
4.5.2.7 How to Sort Voice Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4.5.2.8 How to Delete a Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4.5.3 Fax Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
4.5.3.1 How to Determine your own Fax Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4.5.4 Managing Fax Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
4.5.4.1 How to Display a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
4.5.4.2 How to Call the Sender of a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
4.5.4.3 How to Forward a Fax Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.5.4.4 How to Move a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.5.4.5 How to Save a Fax Message as a TIFF File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
4.5.4.6 How to Sort Fax Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
4.5.4.7 How to Display an Overview of Fax Messages in the Send Queue . . . . . . . . . . . . . . . . . . . . . . . 135
4.5.4.8 How to Cancel Sending a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.5.4.9 How to Display an Overview of Sent Fax Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.5.4.10 How to Resend a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
4.5.4.11 How to Display a Fax Transmission Report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.5.4.12 How to Delete a Fax Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
4.5.5 Sending Fax Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
4.5.6 Notification Service for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
4.5.6.1 How to Enable or Disable E-mail Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
4.5.6.2 How to Enable or Disable the Notification by Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
4.5.6.3 How to Enable or Disable SMS Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
4.5.7 Phone Menu of the Voicemail Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
4.5.7.1 How to Call a Voicemail Box from an Internal Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
4.5.7.2 How to Call a Voicemail Box from an External Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
4.6 Instant Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
4.6.1 Instant Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
4.6.1.1 How to Send an Instant Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
4.7 AutoAttendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
4.7.1 Central AutoAttendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
4.7.2 Personal AutoAttendant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
4.7.2.1 How to Edit a Profile for the Personal AutoAttendant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
5 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
5.1 How to Edit your own Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
5.2 How to Specify an E-Mail Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
5.3 How to Define an Additional Phone Number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
5.4 How to Define an XMPP Alias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
6
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Contents
5.5 How to Provide your own Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6 How to Delete your own Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.7 Programming the Function Keys of the Telephone (not for OpenScape Office HX) . . . . . . . . . . . . . . . . .
5.7.1 How to Program the Function Keys of the Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.8 How to Change the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.9 How to Change the Login Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.10 How to Enable or Disable an Automatic Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.11 How to Select the User Interface Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.12 How to Change the User Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.13 How to Enable or Disable Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.14 How to Restore the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.15 How to Activate or Deactivate a Hotkey. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.16 How to Change the Server Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.17 How to Configure the Transfer Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.18.1 How to Resolve the Problem: No Connection to the Communication System . . . . . . . . . . . . . . . . .
5.18.2 How to Resolve the Problem: Some other Application Starts Instead of myPortal. . . . . . . . . . . . . .
5.18.3 How to Resolve the Problem: Empty Browser Window for Key Programming . . . . . . . . . . . . . . . . .
155
155
155
156
157
158
158
159
159
159
160
161
161
162
162
162
163
163
6 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
6.1 Presence Status Keywords for Outlook Appointments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
6.2 Features of the UC Clients that can be used with SIP Telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
7
Introduction
myPortal for Desktop
1 Introduction
This document is intended for the users of myPortal for Desktop and describes its
installation, configuration and operation.
Related Topics
1.1 myPortal for Desktop
myPortal for Desktop is an application for unified communications. Besides
convenient dialing aids via phone directories and favorites and information on the
presence status of other subscribers, the application can, for example, also used
to access voicemails and fax messages.
myPortal for Desktop provides the following features:
•
Directories
•
Favorites List
•
Journal
•
Desktop Dialer
•
Screen pops
•
Presence status
•
CallMe service with ONS (One Number Service)
•
Status-based call forwarding
•
Personal AutoAttendant
•
Conferences ( (LX/MX)
•
Record calls
•
Record conferences (LX/MX)
•
Instant Messaging
•
Voice and fax messages
Related Topics
1.2 New Features
myPortal for Desktop for OpenScape Office V3 offers several convenient new
features.
Additional User Interface
The alternative modern user interface offers a main window with a small footprint
in different views.
8
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Introduction
Types of Topics
Web Collaboration
You can start Web Collaboration for multi-media collaboration during a phone call
or conference.
Desktop Dialer
The Desktop Dialer enables you to call a marked destination from several
Windows applications such as a text editor or an Outlook e-mail, for example, by
using the appropriate key(s) plus mouse button combination.
Separate Window
You can have the favorites list and the Journal, VoiceMail, Fax Messages and
Directories tabs optionally displayed within the main window or in separate
windows.
External Instant Messaging
You can also chat with one external XPP communication partner (e.g., a Google
Talk user).
Multi-user chat
A multi-user chat is the exchange of instant messages with multiple
communication partners. Here too, the communication system supports a
maximum of one external XMPP communication partner.
Mapping of the External XMPP Status Internally
The external XMPP status is mapped internally, so you can see the presence
status of external XMPP communication partners in the Favorites list or in the
external directory, for example.
Mapping of the Internal Presence Status Externally
External XMPP communication partners can see your XMPP status.
Related Topics
1.3 Types of Topics
The types of topics include concepts and operating instructions.
Type of topic
Contents
Title
Concept
Explains the "What".
Operating
instructions
Describe task-oriented
Starts with "How to" followed by a
application cases – i.e., the
verb, for example: How to Dial a
"How" – and assumes
Call Number.
familiarity with the associated
concepts.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Usually without a verb, e.g.: Call
Functions.
9
Introduction
Display Conventions
Related Topics
Related Topics
• Display Conventions
1.4 Display Conventions
This documentation uses a variety of methods to present different types of
information.
Purpose
Appearance
Sample
User Interface Elements
Bold
Click OK.
Menu sequence
>
File > Exit
Special emphasis
Bold
Do not delete Name.
Cross-reference text
Italics
You will find more
information in the
topicNetwork.
Output
Monospace font, e.g.,
Courier
Command not found.
Input
Monospace font, e.g.,
Courier
Enter LOCAL as the file
name.
Key combination
Monospace font, e.g.,
Courier
<Ctrl>+<Alt>+<Esc>
Work Steps and Substeps
Numbered and alphabetical
lists
• Configure the DSL
telephony stations with
the associated DID
phone numbers.
– Click Add.
– Enter the name of the
Internet telephony
station under Internet
Telephony Station.
Alternative Work Steps
Enumeration
• If you want to output
amounts, enable the
check box Display
amounts instead of
units.
• If you want to output
units, clear the check
box Display amounts
instead of units.
Related Topics
Related Topics
• Types of Topics
10
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Introduction
User Interface Elements
1.5 User Interface Elements
The user interface of myPortal for Desktop consists of the main window and
various screen pops, depending on the situation.
You can configure the following types of interfaces:
•
Classic user interface
•
Modern user interface
This documentation primarily describes the operation of the classic user interface
and points out important differences in the modern user interface.
Classic user interface
1
2
3
4
5
The classic interface offers a large main window with the following elements:
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Menu bar (1) with:
–
Drop-down list for call numbers and the Dial button (Answer during an
incoming call or Hang Up during an ongoing call).
The drop-down list contains up to ten previously dialed numbers and
serves as an input field for numbers to be dialed or names to be found.
–
Conference menu
–
Setup menu
–
Help menu
–
Symbol and also drop-down list for your presence status
–
Name of the logged in user
11
Introduction
User Interface Elements
•
Tabs (2)
You can enable or disable the following tabs individually, but at least one must
be active:
–
Journal
possibly with the number of open calls next to it in parentheses
–
Voicemail
possibly with the number of new voicemails next to it in parentheses
–
Fax Messages
possibly with the number of new fax messages next to it in parentheses
–
Directories
•
Favorites list (3)
•
Workspace (4):
The information and actions available in the workspace depend on the
selected tab.
•
Status bar (5) with:
–
Status of myPortal for Desktop, e.g., Connected
–
Date and Time
–
Version information on the communication system, myPortal for Desktop
and Java
With the classic user interface, the following elements can each be displayed in
either the main window or in separate windows:
•
Favorites List
•
Journal
•
Voice Mail
•
Fax Messages
•
Directories
Symbol
Function
Display in separate window
Display in main window
Modern User Interface
The modern user interface offers a main window with a small footprint in different
views.
Modern User Interface: Normal View
The Normal view is activated by reducing the window width below a certain value
in the Column view or by clicking on the triangle icon to the left of the symbol for
the Favorites list in the Compact view, or by clicking a tab in the Compact view.
12
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Introduction
User Interface Elements
1
2
3
4
5
6
Modern User Interface: Column View
The Column view shows information about your presence on the left, with the
Favorites list always displayed in the workspace on the left. The remaining
elements are contained in the right column. The Column view is activated by
increasing the window width above a certain value.
1
2, 3
4
5
6
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
13
Introduction
User Interface Elements
Modern User Interface: Compact View
In the Compact view, the workspace is hidden. The Compact view is activated by
clicking on the triangle icon to the left of the symbol for the Favorites list.
1
2
3
4
6
The modern user interface offers the following elements in the main window:
•
•
14
Title bar (1) with the following elements (from left to right):
–
Drop-down list for Setup, Logout, Disconnect and Help
–
Minimize button
–
Minimize to tray pop symbol button
–
Maximize button
–
Close button
Information about your presence status (2) with the following elements:
–
Symbol and also drop-down list for your presence status
–
Text with your presence status
–
Info text for your presence status
This text box becomes an input field when clicked.
•
Drop-down list for call numbers (3) and the Dial button (Answer during an
incoming call or Hang Up during an ongoing call).
The drop-down list contains up to ten previously dialed numbers and serves
as an input field for numbers to be dialed or names to be found.
•
Tabs (4) with the following symbols:
–
Favorites list
–
Directories / Search
–
Journal
–
Voice Mail
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Introduction
User Interface Elements
–
Fax Messages
–
Instant Messaging
The tab flashes when new instant messages are received.
–
Conference
The tab will flash at the beginning of a conference if another tab is active.
The Journal, Voice Messages, Fax Messages, Instant Message, and
Conferences tabs always display a red icon with an exclamation mark
whenever any new information is available for them.
•
Workspace (5):
The information and actions available in the workspace depend on the
selected tab. Clicking on a list entry in the Favorites list, directories, journals,
voicemails, fax messages or conferences open it in the Detail view. The
Details view enables further actions via context-sensitive buttons and the
context menu.
•
Status bar (6) with:
–
Version Information
–
Date and Time
Context menus
Context menus provide situation-based actions for selection. Context menus can
be opened by clicking on the relevant object with the second (usually the right)
mouse button.
Tooltips
Tooltips are tiny windows in which myPortal for Desktop displays more
information on objects of the graphical user interface such as icons, input fields
or buttons, for example. ... at the end of a label indicates "incomplete due to lack
of space". The appropriate tool tip appears when you let the mouse pointer hover
over that element for a brief period of time.
Related Topics
Related Topics
• Favorites list
•
How to Change the Width of the Favorites List
•
How to Dial a Number Manually
•
Screen Pops
•
Conferencing (not with OpenScape Office HX)
•
Presence Status
•
Journal
•
Directories
•
Managing Voicemail
•
Managing Fax Messages
•
How to Select the User Interface Language
•
How to Change the User Interface
•
How to Enable or Disable Tabs
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
15
Introduction
Online Help
•
How to Restore the Display
1.6 Online Help
The integrated online help describes key concepts and operating instructions.
Navigation
The buttons in the online help provide the following functions:
•
Contents
provides you with an overview of the structure
•
Index
provides direct access to a topic using keywords
•
Search
allows you to do a full-text search and selectively find all relevant topics
Related Topics
16
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Installing and Starting myPortal for Desktop
Prerequisites for UC PC Clients
2 Installing and Starting myPortal for Desktop
The installation of myPortal for Desktop is subject to specific requirements.
Related Topics
2.1 Prerequisites for UC PC Clients
In order to use UC PC clients, the client PC must be equipped with the appropriate
hardware and software configurations. Depending on the configuration,
administration rights are required for the installation and automatic updates. The
available functionality depends on the licenses being used.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
Telephones
myPortal for Desktop, myAttendant and myPortal for Outlook can be used in
combination with the following telephones:
•
OpenStage HFA
•
OpenStage T (HX)
•
optiPoint 410 HFA
•
optiPoint 420 HFA
•
optiPoint 500 (HX)
•
optiPoint WL2 professional HFA
•
SIP Phone
•
Analog telephone
•
HiPath Cordless IP
•
HiPath Cordless Office (HX)
•
optiClient 130 HFA
•
OpenScape Personal Edition HFA
•
OpenScape Personal Edition SIP
INFO: For analog and DECT telephones, the Message Waiting
Indication (MWI) is not supported, and only limited support is
available for displaying information on the phone.
Operating System
myPortal for Desktop, myAttendant, myPortal for Outlook and Fax Printer can be
used in combination with the following web browsers:
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Microsoft Windows 7
17
Installing and Starting myPortal for Desktop
Prerequisites for UC PC Clients
•
Microsoft Windows Vista
•
Microsoft Windows XP
Local administration rights on a client PC are required for the installation, but not
for automatic updates. The Russian and Chinese user interfaces of myPortal for
Outlook require a Windows installation in the same language.
myPortal for Desktop can also be used with the following operating systems:
•
Apple Mac OS X v10.7 Lion
Windows Update
The PCs always need the current status of all available updates, including Service
Packs.
Web Browsers
myPortal for Desktop, myPortal for Outlook and Fax Printer can be used in
combination with the following web browsers:
•
Microsoft Internet Explorer Version 7
•
Microsoft Internet Explorer Version 8 in compatibility mode
•
Microsoft Internet Explorer Version 9
•
Mozilla Firefox Version 4 or later
Additional Software
Additional Software
myPortal myAttend myPortal
for Deskt
ant
for Outlo
op
ok
Java >= 1.6.031 (see Service Center > Download
Center)
X
X
Microsoft Office 2010 or
X
Microsoft Office 2007(32 bit) with installed .NET
components for Outlook or
Microsoft Office 2003 (32 bit)
Microsoft Office 365
Access to Microsoft Exchange Server or Outlook 365 X
(for Outlook contacts and appointments)
X
Microsoft .NET Framework >= 3.5 (>= 4.0 with
Microsoft Office 2010)
X
INFO: In order to use the Exchange Calendar integration with
Microsoft Small Business Server, FBA (Form Based
Authentication) may need to be disabled there under some
circumstances.
18
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Installing and Starting myPortal for Desktop
Prerequisites for UC PC Clients
Minimum Hardware Requirements
•
2 GHz CPU
•
RAM: 2 GB
(Microsoft Windows XP: 1 GB)
(Microsoft Windows 2003 Server: 1 GB)
•
100 Mbps LAN
•
XGA (1024x768) screen resolution, myPortal for Outlook: SVGA (800x600)
screen resolution
Microsoft Terminal Server, Citrix Server
myAttendant, myPortal for Desktop, myPortal for Outlook and Fax Printer can be
used in Microsoft Terminal Server and Citrix Server environments under the
following preconditions:
INFO: Terminal Server and Citrix Server environments, including
hosted services and virtual environments are the responsibility of
the customer.
Operating system:
•
Microsoft Windows 2008 R2 Server (64 bit) with
Citrix XenApp 6.0 Server (Desktop Mode)
•
Microsoft Windows 2008 R2 Server (64 bit) with
Citrix XenApp 5.0 Server (Desktop Mode)
•
Microsoft Windows 2008 R2 Server (64 bit) as
Microsoft Terminal Server
•
Microsoft Windows 2008 Server as
Microsoft Terminal Server
•
Microsoft Windows 2003 Server as
Microsoft Terminal Server
Office applications:
•
Microsoft Office 2010
•
Microsoft Office 2007 (32 bit)
•
Microsoft Office 2003 (32 bit)
Hardware Prerequisites: The number of installable clients depends on the server
performance and on the amount of available memory. If the server is also being
used for other applications, their memory requirements must also be taken into
account. More information on the configuration of Citrix XenApp Server can be
found under:
http://wiki.siemens-enterprise.com/wiki/OpenScape_Office
Installation Files
The following options are available for providing installation files to users:
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
The administrator downloads the installation files from the Download Center
and provides them to users via a network drive, for example.
19
Installing and Starting myPortal for Desktop
How to Install myPortal for Desktop (Windows)
•
They can access the installation files directly via a network drive connected
with \\<IP address of communication system>\applications
(User: hoome, Password: hoomesw). The installation files are located in the
install-common folder.
Related Topics
Related Topics
• Automatic Updates
•
How to Install myPortal for Desktop (Windows)
•
How to Install myPortal for Desktop (Mac OS)
2.2 How to Install myPortal for Desktop (Windows)
Prerequisites
•
Your PC meets the Prerequisites for UC PC Clients relevant for
myPortal for Desktop.
•
The administrator of your communication system has made the installation file
available to you.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
Step by Step
1) Run the CommunicationsClient.exe program.
2) If the User Account Control window appears with the message An
unidentified program wants access to your computer, click
Allow or Yes.
3) Click on Next twice.
4) Click Custom.
5) Select the myPortal for Desktop / myAttendant feature to be installed.
6) Click Next as often as necessary and then click Finish to complete the
installation process.
Next steps
Start myPortal for Desktop
Related Topics
Related Topics
• Prerequisites for UC PC Clients
•
20
How to Start myPortal for Desktop
•
How to Uninstall myPortal for Desktop (Windows)
•
How to Uninstall myPortal for Desktop (Mac OS)
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Installing and Starting myPortal for Desktop
How to Install myPortal for Desktop (Mac OS)
•
Upgrading to OpenScape Office V3
2.3 How to Install myPortal for Desktop (Mac OS)
Prerequisites
•
Your PC meets the Prerequisites for UC PC Clients relevant for
myPortal for Desktop.
•
The administrator of your communication system has made the installation file
available to you.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
Step by Step
1) Run myPortal.dmg.
2) Clich in Finder on Devices > Programs.
3) Click on myPortal Installer.
4) Click Continue.
5) Click Install.
6) Click Close.
The login screen of myPortal for Desktop appears.
Next steps
Start myPortal for Desktop
Related Topics
Related Topics
• Prerequisites for UC PC Clients
•
How to Start myPortal for Desktop
•
How to Uninstall myPortal for Desktop (Windows)
•
How to Uninstall myPortal for Desktop (Mac OS)
•
Upgrading to OpenScape Office V3
2.4 How to Start myPortal for Desktop
Prerequisites
•
myPortal for Desktop is installed on your PC.
•
If you are working under a Mac OS: the secondary mouse button is activated
(to use context menus).
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
21
Installing and Starting myPortal for Desktop
How to Start myPortal for Desktop
Step by Step
1) Select one of the following options:
•
Mac OS: Click on Programs > myPortal.
•
Windows: Click Start > Program Files > Communication Clients >
myPortal.
INFO: The concurrent usage of myPortal for Desktop with
myPortal for Outlook under the same user name is not supported.
The concurrent usage of myPortal for Desktop with myAgent
under the same user name can lead to restrictions (see
OpenScape Office V3, myAgent, User Guide Notes on Using
OpenScape Office Clients Concurrently).
2) Enter your call number in the User Name field of the Login window.
3) Enter your Password. The default password when logging on for the first time
is 1234. Otherwise, contact the administrator of your communication system.
INFO: When you start a PC client for the first time, you will be
prompted to change your password, provided you have not
already changed it via the phone menu of the voicemail box.
Enter your previous password in the Old password field.
Enter your new password, which must consist of only digits and
include at least six digits, in the New password and Confirm
password fields.
The password applies to myPortal for Desktop, myPortal for
Outlook, Fax Printer, myAgent, myReports and myAttendant, as
well as phone access to your voicemail box.
NOTICE: If the wrong password is entered five times, your
access to all clients will be locked. Unlocking is only possible by
the administrator of your communication system.
4) If you want to use myPortal for Desktop with an automatic login in the future,
enable the check box Save Password. The Login window will then no longer
be displayed. You can change this option at any time.
NOTICE: You should use the automatic login only if you are
certain that no-one else has access to your user account.
Otherwise, unauthorized users could, for example, potentially
access your voicemails and fax messages or redirect your station
number to external toll-based destinations.
5) If you are also a user of myAttendant, select myPortal in the drop-down list.
22
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Installing and Starting myPortal for Desktop
How to Exit myPortal for Desktop
6) If the Server IP is displayed, enter the IP address of the communication
system.
7) Click Login.
Next steps
Change your password if you have not already done this.
Related Topics
Related Topics
• How to Install myPortal for Desktop (Windows)
•
How to Install myPortal for Desktop (Mac OS)
•
How to Change the Password
•
How to Enable or Disable an Automatic Login
•
How to Resolve the Problem: No Connection to the Communication System
•
How to Resolve the Problem: Some other Application Starts Instead of
myPortal
2.5 How to Exit myPortal for Desktop
Due to a current limitation in Oracle Java 1.6.x, it may be necessary to manually
close myPortal for Desktop on 64-bit Microsoft Windows operating systems
before shutting down the PC.
Step by Step
1) Click in the title bar of the myPortal for Desktop window on the Close icon.
2) Click Yes.
Related Topics
2.6 How to Uninstall myPortal for Desktop (Windows)
Prerequisites
•
myAttendant is also no longer required.
Step by Step
1) Close myPortal for Desktop.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
2) Select one of the following options:
•
Windows XP:
Click in the Control Panel on Software.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
23
Installing and Starting myPortal for Desktop
How to Uninstall myPortal for Desktop (Mac OS)
•
Windows Vista:
Click in the Control Panel on Programs and Features.
3) Click on Edit in the context menu of the CommunicationsClients entry.
4) Click Modify.
5) Select the myPortal for Desktop / myAttendant feature to be uninstalled.
Related Topics
Related Topics
• How to Install myPortal for Desktop (Windows)
•
How to Install myPortal for Desktop (Mac OS)
2.7 How to Uninstall myPortal for Desktop (Mac OS)
Step by Step
1) Close myPortal for Desktop.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
2) Click in Finder on Programs.
3) Drag myPortal to the Trash.
Related Topics
Related Topics
• How to Install myPortal for Desktop (Windows)
•
How to Install myPortal for Desktop (Mac OS)
2.8 Automatic Updates
Automatic updates keep Windows applications (e.g., UC clients, Application
Launcher) up to date.
If an application determines that there is a newer version than the one currently
running, it is automatically updated. If required, a message that the application
must be exited in order to to perform the automatic update appears.
Related Topics
Related Topics
• Prerequisites for UC PC Clients
24
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Installing and Starting myPortal for Desktop
Upgrading to OpenScape Office V3
2.8.1 How to Perform Automatic Updates (Windows)
Prerequisites
•
Your PC meets the Prerequisites for UC PC Clients relevant for
myPortal for Desktop.
•
You have received a message such as: OpenScape Office client
update available. Please wait while the update is done.
Please close the following programs to continue the
update: [...].
›
Close the named programs.
Step by Step
Next steps
Restart myPortal for Desktop after the automatic update.
Related Topics
2.8.2 How to Perform Automatic Updates (MAC OS)
Prerequisites
•
Your PC meets the Prerequisites for UC PC Clients relevant for
myPortal for Desktop.
•
You have received a message about a pending update.
›
Click OK.
Step by Step
Next steps
myPortal for Desktop will restart after the automatic update.
Related Topics
2.9 Upgrading to OpenScape Office V3
An upgrade to OpenScape Office V3 requires a different procedure to the usual
updates.
INFO: Please make sure that you refer to the notes in the
ReadMe first.rtf file.
All clients of OpenScape Office V2 must be uninstalled. The clients of the current
version must then be installed. The procedure to be followed also depends on the
operating system. For more information on upgrading to OpenScape Office V3,
contact the administrator of your communication system.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
25
Installing and Starting myPortal for Desktop
Upgrading to OpenScape Office V3
Custom Configuration
Your custom configuration is retained for the most part, except for the following
areas under Setup:
•
My Preferences > Presentation
•
My Preferences > Notification
•
My Preferences > Miscellaneous
After the upgrade, you should check the configuration in these areas and edit
them if required.
Improved Security Concept
OpenScape Office V3 includes an improved security concept that ensures
protection against unauthorized access to OpenScape Office clients and to the
voicemail box. This optimizes the protection of your personal data and prevents
toll fraud.
•
New Password
The new password must consist of at least six digits and applies to myAgent,
myReports, myAttendant, myPortal for Desktop, myPortal for Mobile,
myPortal for OpenStage, myPortal for Outlook and Fax Printer as well as
phone access to your voicemail box.
After the upgrade, you will be prompted to change your password when you
start an OpenScape Office PC client or access your voicemail via the phone
for the first time.
•
Monitoring password entry attempts
If the wrong password is entered five times, your access to all
OpenScape Office clients will be locked. Unlocking is only possible by the
administrator of the communication system.
Related Topics
Related Topics
• How to Install myPortal for Desktop (Windows)
•
26
How to Install myPortal for Desktop (Mac OS)
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
First Steps
3 First Steps
The First Steps describe the recommended actions to be taken right at the
beginning.
Change the password
NOTICE: For security reasons, you should change your
password after logging in for the first time. Otherwise,
unauthorized users could, for example, potentially access your
voicemails and fax messages or redirect your station number to
external toll-based destinations by simply using the default
password.
Select the language settings
Select the respective language for:
•
the user interface of myPortal for Desktop
•
the menu and internal system announcements.
Record your name announcement
Your name announcement is used as an independent component of the
announcements played back by the communication system:
•
when your voicemail box notifies callers about your Presence status
•
for conferences where you are the inviter, as a greeting to the participants:
"... has invited you to participate in a conference"
•
for conferences, to inform participants that you have joined:
"... has joined the conference."
Record your personal greeting
Your personal greeting is played back to callers by default when they reach your
voicemail box. For example: "I am unfortunately unable to take your call at the
moment …". The following announcements are possible as personal greetings:
•
general personal greeting
•
Personal greeting for Busy:
•
Personal greeting for No Answer:
INFO: You can record further announcements; see Voicemail
Box .
Specify your e-mail address
Enter your e-mail address so that the communication system can invite you to
conferences by e-mail and notify you about new voice and Fax messages.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
27
First Steps
How to Select the User Interface Language
Create your Favorites list
Your Favorites list will provide you with a constant view of your most important
contacts and enable you to call them with one click.
Importing Outlook Contacts into myPortal for Desktop (Windows)
You can have your Outlook contacts imported into the personal directory of
myPortal for Desktop automatically on starting. You can then call them
conveniently by using myPortal for Desktop, for example.
Related Topics
Related Topics
• Voicemail Box
3.1 How to Select the User Interface Language
Step by Step
1) Click Setup.
2) Click on My Preferences > Appearance.
3) Select the Language from the drop-down list.
4) Click Save.
Next steps
Exit myPortal for Desktop and restart the application.
Related Topics
3.2 How to Select the Language of the Voicemail Box
Step by Step
1) Click Setup.
2) Click on Communications > VoiceMail Settings.
3) Select the desired language from the VoiceMail Language drop-down list.
4) Click Save.
Related Topics
3.3 How to Record your Name Announcement
INFO: You can also record your name announcement via the
Phone menu of the voicemail box.
28
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
First Steps
How to Record your Personal Greeting
Step by Step
1) Click Setup.
2) Click Profiles and then on any profile.
3) Click Record.
4) Click on My VoiceMail Name in the list of announcements.
5) Click Record. The voicemail box will now call you on your phone.
6) Accept the call from the voicemail box.
7) Speak out your name after the tone.
8) Click Stop.
9) If you want to listen to the announcement on the phone, click on Play. To exit
the playback loop, click on Stop.
10) If you want to record the announcement again, click on Record again.
11) Click on Close, followed by Save.
Related Topics
Related Topics
• How to Record your Personal Greeting
•
How to Call a Voicemail Box from an External Phone
•
Voicemail Box
•
Phone Menu of the Voicemail Box
3.4 How to Record your Personal Greeting
INFO: You can also record your personal greeting via the Phone
menu of the voicemail box.
Step by Step
1) Click Setup.
2) Click Profiles and then on any profile.
3) Click Record.
4) Select one of the following options:
•
If you want to record the general personal greeting, click on My VoiceMail
Greeting.
•
If you want to record the personal greeting for Busy, click on Busy.
•
If you want to record the personal greeting for No Answer, click on No
Answer.
5) Click Record. The voicemail box will now call you on your phone.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
29
First Steps
How to Specify an E-Mail Address
6) Accept the call from the voicemail box.
7) Speak out your personal greeting after the tone.
8) Click Stop.
9) If you want to listen to the announcement on the phone, click on Play. To exit
the playback loop, click on Stop.
10) If you want to record the announcement again, click on Record.
11) Click Save.
Related Topics
Related Topics
• How to Call a Voicemail Box from an External Phone
•
How to Record your Name Announcement
•
Voicemail Box
•
Phone Menu of the Voicemail Box
3.5 How to Specify an E-Mail Address
Prerequisites
•
The administrator of your communication system has configured the sending
of e-mails.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Enter your e-mail address under E-mail.
4) Click Save.
Related Topics
3.6 How to Create a Favorites List
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on one of the directories: Internal Directory, External Directory or
Personal Directory.
3) Drag the desired contact to the Favorites list.
Related Topics
Related Topics
• Favorites list
30
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
First Steps
How to Enable the Import of Outlook Contacts at Startup
3.7 How to Enable the Import of Outlook Contacts at Startup
Prerequisites
•
You are working under Windows.
Step by Step
1) Click Setup.
2) Click on My Preferences > Outlook Connectivity.
3) Enable the Import Outlook Contacts on Startup check box.
4) Click Save.
Related Topics
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
31
Unified Communications
Presence Status and CallMe Service
4 Unified Communications
Unified Communications offers various features such as presence status and
voicemails with the myPortal for Desktop, myPortal for Outlook,
myPortal for Zimbra und myPortal for Mobile clients.
Related Topics
4.1 Presence Status and CallMe Service
The Presence status and CallMe service display and optimize the availability of
subscribers. The Presence status enables simple status-based call forwarding as
well as rule-based call forwarding, which can be flexibly configured with
myPortal for Desktop or myPortal for Outlook.
Related Topics
4.1.1 Presence Status
The Presence status indicates the availability of internal subscribers (including
Mobility Entry subscriber) in the Favorites list, the internal directory, the virtual
conference room and via voicemail announcements. In addition, the Presence
status controls the availability of internal subscribers with status-based call
forwarding, rule-based call forwarding and the personal AutoAttendant.
You can change your Presence status in myPortal for Desktop and also in the
Phone menu of the voicemail box. Deactivating call forwarding at the telephone
returns you to the Office presence status. For every change in the Presence
status (except for Office and CallMe), you also define the scheduled time of your
return to the Office or CallMe status.
The drop-down list for the Presence status includes the following symbols:
Symbol
Presence status
Office
Availability
Available at the normal workplace
Only selectable if the Call-Me
service is not active
Otherwise, Call-Me appears
here.
Call-Me
Available at an alternative workplace
Only selectable if the Call-Me
service is active Otherwise,
Office appears here.
Meeting
32
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
Symbol
Presence status
Availability
Sick
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Break
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Gone out
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Vacation
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Lunch
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Gone Home
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
Do Not Disturb
Absent - Call forwarding to the voicemail box
or status-based call forwarding to another
call number
(not available for Mobility
Entry or MULAP)
Call-Me is shown in the Favorites list and in the internal directory as Office. The
following additional symbols are available there:
Symbol
Presence or connection status
Subscriber receives a call
Subscriber is calling
The subscriber is on the phone
Presence status is not visible
Phone is not connected
INFO: For subscribers without system telephones (e.g., ISDN or
analog), the Favorites list and the internal directory do not indicate
any presence, but only the connection status.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
33
Unified Communications
Presence Status and CallMe Service
Mapping of the External XMPP Status Internally (Classic User Interface)
The external XMPP status is mapped internally, so you can see the presence
status of external XMPP communication partners in the Favorites list or the
external directory, for example, provided XMPP has been configured. The
following mappings apply (from left to right):
XMPP status
Represented as presence status
Online
Office
DND
Meeting
Away
Out of the Office
Extended Away
Vacation
INFO: Outlook contacts must include the XMPP ID In the IM
address in accordance with the following pattern:
xmpp:[email protected]
Mapping of the Internal Presence Status Externally
External XMPP communication partners can see your XMPP status, provided
XMPP has been configured. The following mappings apply (from left to right):
Presence status
Represented as XMPP status
Office
Online
Meeting
DND
Sick
Away
Break
Away
Out of the Office
Away
Lunch
Away
Gone Home
Away
Vacation
Extended Away
Call Forwarding to the Voicemail Box
If your Presence status is not Office or CallMe, the communication system
redirects calls to you to your voicemail box by default and notifies the callers via
status-based announcements about the nature of your absence and the
scheduled time for your return.
Info Text
You can enter any info text for your current presence status, e.g., "I am in Room
No. ..." when attending a meeting. The info text is displayed in the Favorites list,
in the internal directory and in the virtual conference room (not with OpenScape
Office HX). The info text is deleted when you change your presence status.
34
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
Automatic Reset of the Presence Status
You can have your Presence status automatically reset to Office at the end of
your scheduled absence. Otherwise, the communication system extends the
current Presence status in increments of 15 minutes until you change it yourself.
Visibility of your Presence Status
For each subscriber in the internal directory, you can specify whether that
subscriber can see your Presence status other than Office and Call-Me as well
as the scheduled time of your return and any info text you may have entered.
Automatic Update of Presence Status via Outlook Appointments (Windows)
You can automatically control your Presence status via Outlook appointments by
using specific keywords in the Subject line. You can choose between the following
calendars:
•
Exchange calendar (on the Exchange Server)
The automatic update of the presence status via Outlook appointments
occurs independently, regardless of whether or not your PC is running. The
administrator must configure the Exchange Calendar Integration for this
function.
•
Outlook calendar
The automatic update of the presence status via Outlook appointments
requires myPortal for Desktop to have been started on your PC.
You can use the following keywords:
•
Meeting
•
Sick
•
Break
•
Gone Out
•
Vacation
•
Lunch
•
Gone Home
The keywords depend on the language set for the user interface. The keywords
may be located anywhere in the Subject line. If the Subject line contains more
than one such keyword, only the fist takes effect. When this function is enabled,
your Presence status changes automatically at the start and end time of the
relevant appointment.
NOTICE: When enabling this function, please bear in mind that
any Outlook appointments with these keywords in the Subject line
could lead to undesirable changes in your Presence status.
Consequently, you may nee to change the Subject line if needed.
Automatic Creation of Outlook Appointments when Absent)
You can have appropriate Outlook appointments created automatically when you
are absent by a change in your Presence status. The Subject line of the
corresponding Outlook appointment consists of your Presence status and the text
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
35
Unified Communications
Presence Status and CallMe Service
"(Auto)", for example: "Meeting (Auto)". The start and end times for the
appointment involved correspond to your entries in myPortal for Desktop. The
end time of the Outlook appointment remains unchanged in the event of a
possibly delayed return. The Outlook appointments are created in your local pst
file, regardless of whether or not your Outlook is open.
Screen Pops on Changing the Presence Status
You can have changes to your Presence status indicated by a screen pop.
Related Topics
Related Topics
• User Interface Elements
•
Directories
•
Favorites list
•
Journal
•
How to Enable or Disable the Announcement of your Presence Status for
External Callers
•
How to Enable or Disable the Announcement of your Presence Status for
Specific Callers
•
CallMe Service
•
Status-based Call Forwarding
•
Rule-Based Call Forwarding
•
Personal AutoAttendant
•
Phone Menu of the Voicemail Box
4.1.1.1 How to Change the Presence Status to Absent
Step by Step
1) Select one of the following options in the drop-down list for the Presence
status: Meeting, Sick, Break, Out of the Office, Vacation, Lunch, Gone
Home or Do Not Disturb.
2) Select one of the following options to specify the time of your return:
•
Click on one the four buttons with the desired time duration.
•
Select a time and a date in the calendar control.
3) If you want to specify an info text for the Presence status, select one of the
following options:
•
Enter the info text in the Notes drop-down list.
•
Select one of the previously used info texts shown in the Notes dropdown list.
4) Click OK.
36
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
Related Topics
Related Topics
• How to Change the Presence Status to Office
•
How to Enable or Disable Automatic Resetting of the Presence Status
•
How to Enable the Call-Me Service
4.1.1.2 How to Change the Presence Status to Office
INFO: You can also return to the Office presence status by
deactivating the call forwarding at the telephone.
Step by Step
1) Select Office in the drop-down list for the Presence status.
2) Click on the option Return to the office.
3) If you want to specify an info text for the Presence status, select one of the
following options:
•
Enter the info text in the Notes drop-down list.
•
Select one of the previously used info texts shown in the Notes dropdown list.
4) Click OK.
Related Topics
Related Topics
• How to Change the Presence Status to Absent
•
How to Enable or Disable Automatic Resetting of the Presence Status
4.1.1.3 How to Add Info Text for your Presence Status
Prerequisites
•
You are working with the modern user interface.
Follow these steps if you want to add an info text without changing your presence.
Step by Step
1) Click in the text field for the info text about your presence status.
2) Enter the desired info text.
Related Topics
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
37
Unified Communications
Presence Status and CallMe Service
4.1.1.4 How to Enable or Disable Automatic Resetting of the Presence Status
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
3) Select one of the following options:
•
If you want to enable automatic resetting of the Presence status to Office,
select the Auto back to office check box.
•
If you want to disable automatic resetting of the Presence status to Office,
clear Auto back to office check box.
4) Click Save.
Related Topics
Related Topics
• How to Change the Presence Status to Absent
•
How to Change the Presence Status to Office
•
How to Enable the Call-Me Service
4.1.1.5 How to Change the Visibility of your Presence Status for Others
Step by Step
1) Click Setup.
2) Click on Sensitivity > Presence Visibility.
3) Select one of the following options:
•
If you want to make your presence visible to a specific subscriber, enable
the check box in the appropriate row.
•
If you want to make your presence invisible to a specific subscriber, clear
the check box in the appropriate row.
•
If you want to make your presence visible to all subscribers, click Select
All.
•
If you want to make your presence invisible to all subscribers, click
Unselect All.
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable the Announcement of your Presence Status for
Specific Callers
•
38
How to Enable or Disable the Announcement of your Presence Status for
External Callers
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
4.1.1.6 How to Enable or Disable Automatic Updating of the Presence Status via Outlook
Appointments
Prerequisites
•
You are working under Windows.
•
Your administrator has configured the Exchange Calendar Integration.
•
You have specified a valid MS Exchange e-mail address in
myPortal for Desktop.
Step by Step
1) Click Setup.
2) Click on My Preferences > Outlook Connectivity.
3) Select one of the following options:
•
If you want to enable automatic updating of the Presence status via
Outlook appointments from the Exchange calendar, select the item
Exchange Calendar Integration in the drop-down list.
•
If you want to enable automatic updating of the Presence status via
Outlook appointments from the Outlook calendar, select the item Outlook
Calendar Integration in the drop-down list.
•
If you want to disable automatic updating of the Presence status via
Outlook appointments, select the item No Calendar Integration in the
drop-down list.
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable the Automatic Creation of Outlook Appointments
when Absent
•
Presence Status Keywords for Outlook Appointments
•
How to Specify an E-Mail Address
4.1.1.7 How to Enable or Disable the Automatic Creation of Outlook Appointments when
Absent
Prerequisites
•
You are working under Windows.
•
Your administrator has configured the Exchange Calendar Integration.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
39
Unified Communications
Presence Status and CallMe Service
Step by Step
1) Click Setup.
2) Click on My Preferences > Outlook Connectivity.
3) Choose one the following options in the Outlook area:
•
If you want to enable the automatic creation of Outlook appointments
when you are absent, select the check box Automatically generate
calendar appointments from my presence changes..
•
If you want to disable the automatic creation of Outlook appointments
when you are absent, clear the check box Automatically generate
calendar appointments from my presence changes..
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable Automatic Updating of the Presence Status via
Outlook Appointments
4.1.1.8 How to Enable or Disable Screen Pops on Changing the Presence Status
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable screen pops on changing the Presence status,
select the check box Display tray pop on change of presence.
•
If you want to disable screen pops on changing the Presence status, clear
the check box Display tray pop on change of presence.
4) Click Save.
Related Topics
Related Topics
• Screen Pops
4.1.2 CallMe Service
The Call-Me service can be used to define any phone at an alternative workplace
as the Call-Me destination at which you can be reached through your own internal
phone number. You can use myPortal for Desktop at your alternative workplace
exactly as in the office and thus also make outgoing calls from the Call-Me
destination.
40
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
Inbound Calls
Inbound calls to your internal phone number are forwarded to your Call-Me
destination. Your internal phone number is displayed to the caller. Unanswered
calls are forwarded to the voicemail box after 30 seconds.
Outbound Calls
For outbound calls with myPortal for Desktop, the communication system sets up
two connections. It first calls you at your Call-Me destination. If you answer the
call, the communication system then calls the desired destination and connects
you with it. Your internal phone number is displayed at the destination (One
Number Service).
Presence Status
When the Call-Me service is enabled, the message "Call-Me active" appears
in the display of your phone (not for analog and DECT phones). Other subscribers
will see your presence status as Office.
Activation
You can activate the Call-Me service manually. In addition, the Call-Me service is
also reActivated by an automatic reset of the Presence status following an
absence, provided it was active earlier. Then following types of CallMe
destinations are not supported:
•
Group
•
Redirected telephone
Deactivation
The CallMe service remains active until your Presence status changes.
Related Topics
Related Topics
• Presence Status
4.1.2.1 How to Enable the Call-Me Service
Step by Step
1) Select Office in the drop-down list for the Presence status.
2) Click on the option Enable CallMe service.
3) Set the call number of the Call-Me destination by one of the following
methods:
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Select one of your additional call numbers from the drop-down list.
41
Unified Communications
Presence Status and CallMe Service
•
Enter the phone number in dialable format or in canonical format in the
drop-down list
INFO: Do not enter a group or a redirected phone as the Call-Me
destination.
4) Click OK.
Related Topics
Related Topics
• Call Number Formats
•
How to Change the Presence Status to Absent
•
How to Enable or Disable Automatic Resetting of the Presence Status
•
How to Define an Additional Phone Number
4.1.3 Status-based Call Forwarding
Status-based call forwarding enables you to forward calls based on your
Presence status to one of your additional phone numbers or your voicemail box.
You can configure status-based call forwarding for every Presence status except
Office, CallMe and Do Not Disturb. When you change your Presence status, the
communication system activates call forwarding to the destination defined by you
for this purpose. For example, if you are away from the office, to your mobile
phone or if you are on vacation, to your representative.
Related Topics
Related Topics
• Presence Status
•
How to Define an Additional Phone Number
•
Rule-Based Call Forwarding
•
How to Define an Additional Phone Number
4.1.3.1 How to Configure Status-based Call Forwarding
Prerequisites
•
You have configured at least one additional phone number.
Step by Step
1) Click Setup.
2) Click on Call Rules > Forwarding Destinations.
42
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
3) Choose one of the following destinations from the drop-down list in the row
with the appropriate Presence status: None, Mobile, Assistant, External 1,
External 2, Home or Voicemail.
4) Click Save.
Related Topics
4.1.4 Rule-Based Call Forwarding
Rules-based call forwarding enables you to forward calls based on numerous
conditions and exceptions even more flexibly than with status-based call
forwarding, e.g., to forward calls from unknown contacts to your voicemail box.
In addition, rule-based call forwarding also supports:
•
Any destinations
•
Presence status Office, CallMe and Do Not Disturb
You can define rules are activate or deactivate them at any time by using the
Rules wizard. A rule can only be active if your phone has not been forwarded.
Status-based call forwarding (except to the voicemail box) overrides rule-based
call forwarding.
When a call forwarding rule is active, its name appears on the display of your
telephone.
When an inbound call is received, the communication system checks the
applicability of the active rule in accordance with its sequential order in the Rules
wizard. Only the first applicable rule is executed. In this case, your phone will ring
once, and the communication system will then forward your call to the defined
destination.
You can define several types of conditions and exceptions (except when ...) in one
rule. However, you cannot define a condition with an exception of the same type.
For example, it is not possible to define a condition of the type "On certain
weekdays" together with an exception of the type "Except on certain weekdays".
Types of Conditions and Exceptions
•
(except) for certain Presence status
•
(except) from certain people (in the internal directory, external directory,
personal directory or from any station number)
•
(except) when transferred to you from certain people (in the internal directory,
external directory, personal directory or from any station number)
•
(except) from a certain type, i.e., internal, external or Unknown Contact
•
(except) on a certain date (also on multiple dates)
•
(except) on certain weekdays
•
(except) between a certain Start and End date
•
(except) between a certain Start and End time
Related Topics
Related Topics
• Presence Status
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
43
Unified Communications
Presence Status and CallMe Service
•
Status-based Call Forwarding
4.1.4.1 How to Add a Call Forwarding Rule
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click New.
4) Enter a name for the rule under Name for rule (max. 15 characters).
5) Select one of the following options:
•
If you want the rule to take effect immediately, enable the check box This
rule is active.
•
If you do not want the rule to take effect yet, clear the check box This rule
is active.
6) Click Destination.
7) Enter the phone number in dialable format or in canonical format and click
OK.
8) Click Next.
9) If you want to add a condition, enable the check box When ... in the
appropriate row and click in the lower area on the desired underlined details
(Start Date, End Date, Start Time, End Time, People, Type, Date Values,
Weekdays, transfer people or Presence Status) to specify the condition
more precisely in the next dialog.
10) Click Next.
11) If you want to add an exception, enable the check box Except when ... in the
appropriate row and click in the lower area on the desired underlined details
(Start Date, End Date, Start Time, End Time, People, Type, Date Values,
Weekdays or Presence Status) to specify the exception more precisely in
the next dialog.
12) Click Next followed by Finish.
13) Click Save.
Related Topics
Related Topics
• Call Number Formats
44
•
How to Edit a Call Forwarding Rule
•
How to Copy a Call Forwarding Rule
•
How to Rename a Call Forwarding Rule
•
How to Remove a Call Forwarding Rule
•
How to Change the Order of Call Forwarding Rules
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
4.1.4.2 How to Edit a Call Forwarding Rule
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click on the relevant rule and then on Edit.
4) Select one of the following options:
•
If you want the rule to take effect immediately, enable the check box This
rule is active.
•
If you do not want the rule to take effect, clear the check box This rule is
active.
5) If you want to change the phone number, click in the lower area on the
underlined phone number and then enter the desired phone number in
dialable format or in canonical format and click OK.
6) Click Next.
7) Select one of the following options:
•
If you want to add a condition, enable the check box When ... in the
appropriate row and click in the lower area on the desired underlined
details (Start Date, End Date, Start Time, End Time, People, Type,
Date Values, Weekdays, transfer people or Presence Status) to
specify the condition more precisely in the next dialog.
•
If you want to edit a condition, click in the lower area on the appropriate
underlined detail (Start Date, End Date, Start Time, End Time, People,
Type, Date Values, Weekdays, transfer people or Presence) to specify
the exception more precisely in the next dialog.
•
If you want to remove a condition, clear the When … check box in the
appropriate row.
8) Click Next.
9) Select one of the following options:
•
If you want to add an exception, enable the check box Except when ... in
the appropriate row and click in the lower area on the desired underlined
details (Start Date, End Date, Start Time, End Time, People, Type,
Date Values, Weekdays or Presence Status) to specify the exception
more precisely in the next dialog.
•
If you want to edit an exception, click in the lower area on the appropriate
underlined detail (Start Date, End Date, Start Time, End Time, People,
Type, Date Values, Weekdays or Presence Status) to specify the
exception more precisely in the next dialog.
•
If you want to remove an exception, clear the Except when … check box
in the appropriate row.
10) Click Next followed by Finish.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
45
Unified Communications
Presence Status and CallMe Service
11) Click Save.
Related Topics
Related Topics
• Call Number Formats
•
How to Add a Call Forwarding Rule
•
How to Copy a Call Forwarding Rule
•
How to Rename a Call Forwarding Rule
•
How to Remove a Call Forwarding Rule
•
How to Change the Order of Call Forwarding Rules
4.1.4.3 How to Copy a Call Forwarding Rule
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click on the relevant rule and then on Copy.
4) Enter a name for the new rule (max. 15 characters) and click OK.
5) Click Save.
Related Topics
Related Topics
• How to Add a Call Forwarding Rule
•
How to Edit a Call Forwarding Rule
•
How to Rename a Call Forwarding Rule
•
How to Remove a Call Forwarding Rule
•
How to Change the Order of Call Forwarding Rules
4.1.4.4 How to Rename a Call Forwarding Rule
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click on the relevant rule and then on Rename.
4) Enter a new name for the new rule (max. 15 characters) and click OK.
5) Click Save.
46
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Presence Status and CallMe Service
Related Topics
Related Topics
• How to Add a Call Forwarding Rule
•
How to Edit a Call Forwarding Rule
•
How to Copy a Call Forwarding Rule
•
How to Remove a Call Forwarding Rule
•
How to Change the Order of Call Forwarding Rules
4.1.4.5 How to Remove a Call Forwarding Rule
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click on the relevant rule and then on Remove.
4) Click Save.
Related Topics
Related Topics
• How to Add a Call Forwarding Rule
•
How to Edit a Call Forwarding Rule
•
How to Copy a Call Forwarding Rule
•
How to Rename a Call Forwarding Rule
•
How to Change the Order of Call Forwarding Rules
4.1.4.6 How to Change the Order of Call Forwarding Rules
Step by Step
1) Click Setup.
2) Click on Call Rules > Rules Engine.
3) Click on the rule that you want to move.
4) Select one of the following options:
•
If you want to move the rule up by one position in the order, click on Move
Up.
•
If you want to move the rule down by one position in the order, click on
Move Down.
5) Click Save.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
47
Unified Communications
Directories and Journal
Related Topics
Related Topics
• How to Add a Call Forwarding Rule
•
How to Edit a Call Forwarding Rule
•
How to Copy a Call Forwarding Rule
•
How to Rename a Call Forwarding Rule
•
How to Remove a Call Forwarding Rule
4.2 Directories and Journal
Directories, the Favorites List and the Journal organize contacts and calls.
Related Topics
4.2.1 Directories
Directories organize your contacts.
myPortal for Desktop provides the following directories, which support the
functions shown below:
48
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
Symbol
Directory
Make
Call
Personal directory:
Look up
caller
names
Send Instant
Message
Add to
Favorites
Add to
Conference
x
x
-
x
x
x
x
x
x
x
x
x
-
x
x
x
x
-
x
x
You can use the personal directory to
either add, edit and delete your personal
contacts individually or, when using
Windows, to import your Outlook contacts
on starting myPortal for Desktop. If you
import the Outlook contacts, you cannot
edit them in myPortal for Desktop.
Internal directory (symbol for system
phones in accordance with current
Presence status)
Contains internal subscribers with their
Presence status (only system telephones)
and possibly their additional phone
numbers, provided the subscriber has
made these numbers visible to others.
When a subscriber is absent, you can see
the scheduled time of return in the Date /
Time column, provided that subscriber
has allowed his or her Presence status to
be visible to you. and any info text that
may have been entered by the subscriber
are also displayed.
External directory:
Contains contacts from a corporate
directory and possibly from the public
Exchange folder (not usable with
Office 365) and must be configured by the
administrator of the communication
system.
External Offline Directory (LDAP):
Contains contacts from the LDAP
corporate directory and must be
configured by the administrator of the
communication system. The external
offline directory is only used for the
search.
INFO: Phone numbers in directories should always be entered in
canonical format, if possible.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
49
Unified Communications
Directories and Journal
Contact Details
Depending on the directory involved, the List view of contacts in the classic
interface shows different details from among those listed below: Extension,
Date / Time, Last Name, First Name, Mobile Ph., Assistant Ph., External,
Home Ph. 1, Business Ph. 1, Business Ph. 2, Fax Ph., E-mail, XMPP ID,
Department, Site, Company and Customer ID.
Simple Search
You can search the directories by First Name, Last Name or a call number. The
directories are searched in the order shown in the table above. The search can
be conducted using whole words and also with partial search terms such as a part
of a station number, for example. The set search options remain in effect for
subsequent searches. Al search terms used are saved. You can optionally delete
the list of search terms used.
Advanced Search
You can selectively search in the Title, First Name, Last Name, Company,
Extension, Company Ph., Business Ph. 1, Business Ph. 2, Home Ph. 1,
Home Ph. 2, Mobile Number and E-mail fields and limit the maximum number
of hits. The modern interface of myPortal for Desktop does not support the
advanced search.
Sorting
You can sort the contacts of a directory by any column in ascending or descending
alphanumeric order. The direction in which the triangle at a column header is
pointing indicates the ascending or descending order. The modern interface of
myPortal for Desktop does not support sorting.
Zooming in on an Entry
You can zoom in on a specific entry one character at a time in the column by which
the entries are sorted. For example, you could jump to the first Last Name starting
with "Sen" one letter at a time. This method can also be used in the results of a
search. The modern interface of myPortal for Desktop does not support zooming
in on an entry.
Related Topics
Related Topics
• User Interface Elements
50
•
How to Pick up a Call for Another Subscriber
•
How to Call from a Directory (Classic User Interface)
•
How to Call from a Directory (Modern User Interface)
•
How to Enable or Disable the Opening of the Main Window on Inbound Calls
•
How to Send an Instant Message
•
How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
•
How to Add Contacts from the Journal to the Personal Directory
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
•
How to Add Conference Participants
•
Favorites list
•
Screen Pops
•
Presence Status
•
Configuration
4.2.1.1 How to Search in Directories (Classic User Interface)
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on Search to open the Search mask.
3) If necessary, click on Options to display the Search options.
4) Select one of the following Search options:
•
If you want to search for a full word, select the Match Full Word check
box.
•
If you want to search for a part of a word, clear the Match Full Word
check box.
5) If necessary, click on Advanced to switch between simple and advanced
searches.
6) Select one of the following options:
•
If you want to perform a simple search, enter a search term in the dropdown list and click Search. If your search returns a result,
myPortal for Desktop will display a hit list.
•
If you want to perform an advanced search, click on Advanced, enter a
search term in the appropriate field and click Search. If your search
returns a result, myPortal for Desktop will display a hit list.
7) To abort an ongoing search, click Stop.
8) To delete the list of search terms used, click Clear History.
9) To return from the hit list to the directory, click on the desired directory.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
How to Add Conference Participants
51
Unified Communications
Directories and Journal
4.2.1.2 How to Search in Directories (Modern User Interface)
Step by Step
1) Click on the Directories / Search tab.
2) Enter a search term in the input field.
3) Select one of the following Search options:
•
If you want to search for a full word, select the Match Full Word option.
•
If you want to search for a part of a word, select the option In String.
4) Click on the Search button.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add Conference Participants
4.2.1.3 How to Sort a Directory
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on the desired directory, e.g., Internal Directory.
3) Click on one of the column titles, e.g., Last Name, to sort the contacts by this
criterion in ascending alphanumeric order.
4) If you want to reverse the sort order, click again on column header.
5) To jump to the first entry in the sorted column that begins with a specific
character, click on any contact in the directory and enter the desired
character.
Related Topics
Related Topics
• How to Zoom in on an Entry
4.2.1.4 How to Perform a Quick Search by Name
Step by Step
›
52
Enter a name as the search term in the drop-down list for phone numbers and
press the Enter key.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
Related Topics
4.2.1.5 How to Zoom in on an Entry
Prerequisites
•
You are working with the classic user interface.
•
The list is sorted by the column containing an item that you want to zoom in
on.
Step by Step
1) Click on any item in the list.
2) Enter the first character of the desired hit.
Related Topics
Related Topics
• How to Sort a Directory
•
Journal
•
How to Sort the Journal
4.2.1.6 How to Add a Personal Contact
Prerequisites
•
The importing or Outlook contacts at startup is disabled.
•
You are working with the classic user interface.
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on Personal Directory.
3) Click Add.
4) Enter the contact data in the Personal Contact window.
INFO: Any XMPP ID that may be specified must match the
pattern xmpp:[email protected]
5) Click Save.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
53
Unified Communications
Directories and Journal
•
How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
•
How to Edit a Personal Contact
•
How to Delete a Personal Contact
•
How to Enable or Disable the Import of Outlook Contacts at Startup
4.2.1.7 How to Edit a Personal Contact
Prerequisites
•
The importing or Outlook contacts at startup is disabled.
•
You are working with the classic user interface.
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on Personal Directory.
3) Click on the relevant personal contact.
4) Click Edit.
5) Edit the contact data in the Personal Contact window.
INFO: Any XMPP ID that may be specified must match the
pattern xmpp:[email protected]
6) Click Save.
Related Topics
Related Topics
• How to Add a Personal Contact
•
How to Delete a Personal Contact
•
How to Enable or Disable the Import of Outlook Contacts at Startup
4.2.1.8 How to Delete a Personal Contact
Prerequisites
•
The importing or Outlook contacts at startup is disabled.
•
You are working with the classic user interface.
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on Personal Directory.
54
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
3) Select one of the following options:
•
Click on the relevant personal contact.
•
Mark the relevant personal contacts.
4) Click on Remove, followed by Yes.
Related Topics
Related Topics
• How to Add a Personal Contact
•
How to Edit a Personal Contact
•
How to Enable or Disable the Import of Outlook Contacts at Startup
4.2.1.9 How to Enable or Disable the Import of Outlook Contacts at Startup
Prerequisites
•
You are working under Windows.
Step by Step
1) Click Setup.
2) Click on My Preferences > Outlook Connectivity.
3) Choose one the following options in the Outlook area:
•
If you want to enable the importing of Outlook contacts on starting
myPortal for Desktop, select the Import Outlook Contacts on Startup
check box.
•
If you want to disable the importing of Outlook contacts on starting
myPortal for Desktop, clear the Import Outlook Contacts on Startup
check box.
4) Click Save.
Related Topics
Related Topics
• How to Add a Personal Contact
•
How to Edit a Personal Contact
•
How to Delete a Personal Contact
4.2.2 Favorites list
The Favorites list provides you with a constant view of selected contacts. These
contacts can also be called very easily directly from the Favorites list. All internal
subscribers with system telephones and, with the classic user interface also
external XMPP communication partners, are shown together with their Presence
status and can be contacted via instant messaging.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
55
Unified Communications
Directories and Journal
You can add contacts from all directories to the Favorites list. For favorites that do
not come from the internal directory, instead of the symbol for the Presence
status, the symbol for the source of the contact is displayed.
The Favorites list manages contacts in groups. The contacts in all groups can be
sorted by First Name, Last Name or their original sorting order.
When an internal subscriber is absent, you can determine the scheduled time of
his or her return by positioning the mouse pointer over the entry for that
subscriber, provided the subscriber has allowed his or her Presence status to be
visible to you.
For favorites with multiple phone numbers, you can specify a default number with
which the contact is to be called. The default phone number of a favorite can be
determined in the context menu from the symbol with the activated check box.
For each entry in the Favorites list, the modern user interface additionally displays
the image and info text on the presence status of the user in the overview, to the
extent that this is available. The Details view includes, among other things, the
standard phone number and context-sensitive buttons, e.g., for Make Call, Take
Call, Send Instant Message and Add to Conference.
Related Topics
Related Topics
• User Interface Elements
•
How to Pick up a Call for Another Subscriber
•
How to Create a Favorites List
•
Directories
•
How to Make a Call from the Favorites List (Classic User Interface)
•
How to Make a Call from the Favorites List (Modern User Interface)
•
How to Add Conference Participants
•
How to Send an Instant Message
•
Presence Status
•
Configuration
4.2.2.1 How to Add a Group to the Favorites List
Step by Step
1) Select one of the following options:
•
Classic user interface:
Right-click in a free area of the Favorites list to open the context menu and
select New Group.
•
Modern user interface:
Click on the Favorites list icon, and then click in a free area of the
Favorites list to open the context menu and select Add Group.
2) Enter a Group Name.
56
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
3) Click OK.
Next steps
Add contacts to the Favorites list.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
•
How to Delete a Group from the Favorites List
•
How to Rename a Group in the Favorites List
4.2.2.2 How to Rename a Group in the Favorites List
Step by Step
1) Select one of the following options:
•
Classic user interface:
Click on Rename Group in the context menu for the relevant group name
in the Favorites list.
•
Modern user interface:
Click on the Favorites list icon, and then on Rename Group in the context
menu for the relevant group name in the Favorites list.
2) Enter a Group Name.
3) Click OK.
Related Topics
Related Topics
• How to Add a Group to the Favorites List
•
How to Delete a Group from the Favorites List
4.2.2.3 How to Delete a Group from the Favorites List
Step by Step
›
Select one of the following options:
•
Classic user interface:
Click on Remove Group in the context menu for the relevant group name
in the Favorites list.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
57
Unified Communications
Directories and Journal
•
Modern user interface:
Click on the Favorites list icon, and then on Remove Group in the context
menu of the Favorites list.
Related Topics
Related Topics
• How to Add a Group to the Favorites List
•
How to Rename a Group in the Favorites List
4.2.2.4 How to Add a Contact to the Favorites List (Classic User Interface)
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Select one of the following options:
•
Click on one of the directories: Internal Directory, External Directory or
Personal Directory.
•
Search the directories; see How to Search in Directories (Classic User
Interface) for details.
3) Drag the desired contact to the Favorites list.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
•
Directories
•
How to Search in Directories (Classic User Interface)
•
How to Search in Directories (Modern User Interface)
•
How to Specify a Default Number for a Favorite
•
How to Add a Group to the Favorites List
•
How to Delete a Contact from the Favorites List
4.2.2.5 How to Add a Contact to the Favorites List and Personal Contacts (Modern User
Interface)
Step by Step
1) Click on the Favorites list icon.
2) Click in the context menu of the Favorites list on Add Favorite.
3) Click on New Contact.
58
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
4) Enter the contact data.
INFO: Any XMPP ID that may be specified must match the
pattern xmpp:[email protected]
5) If you want to include the contact via the entered XMPP ID, click on
Subscribe for IM.
6) Click Add.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add a Personal Contact
•
Directories
•
How to Add a Personal Contact
•
How to Specify a Default Number for a Favorite
•
How to Add a Group to the Favorites List
•
How to Delete a Contact from the Favorites List
4.2.2.6 How to Delete a Contact from the Favorites List
Step by Step
›
Select one of the following options:
•
Classic user interface:
Click on Remove Favorite in the context menu for the relevant contact in
the Favorites list.
•
Modern user interface:
Click on the Favorites list icon, and then on Remove Favorite in the
context menu for the relevant contact in the Favorites list.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
4.2.2.7 How to Change the Sorting of the Favorites List
Step by Step
›
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Right-click in a free area of the Favorites list to open the context menu and
select one of the following entries:
59
Unified Communications
Directories and Journal
•
Sort By First Name
•
Sort By Last Name
•
Sort By User Define for the original sorting order.
Related Topics
4.2.2.8 How to Specify a Default Number for a Favorite
Step by Step
1) Select one of the following options:
•
Classic user interface:
Click on Select Phone Number in the context menu for the relevant
contact in the Favorites list.
•
Modern user interface:
Click on the Favorites list icon, and then on Select Phone Number in the
context menu for the relevant contact in the Favorites list.
2) Select the phone number that you want to use as the default number for this
favorite from the drop-down list.
3) Click OK.
Related Topics
Related Topics
• How to Add a Contact to the Favorites List (Classic User Interface)
•
How to Add a Contact to the Favorites List and Personal Contacts (Modern
User Interface)
•
How to Make a Call from the Favorites List (Classic User Interface)
•
How to Make a Call from the Favorites List (Modern User Interface)
4.2.2.9 How to Change the Width of the Favorites List
Prerequisites
•
You are working with the classic user interface.
•
The Favorites list is located in the main window of myPortal for Desktop.
›
Move the right edge of the Favorites list with the mouse in the desired
direction.
Step by Step
Related Topics
Related Topics
• User Interface Elements
60
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
4.2.3 Journal
The Journal is the list of all your inbound and outbound calls. You can use it to
quickly and easily call your contacts again or to respond to missed calls.
Folder for Call Types
The calls are arranged on the following tabs:
•
Open (classic user interface)
Contains the unanswered missed calls for which a call number was
transmitted. As soon as you answer one of these calls, all associated entries
with that call number are dropped from the list.
•
All calls
•
Missed
INFO: If you want to be notified about missed calls via screen
pops, disable the "close tray pop on call termination" function.
•
Answered
•
Internal (classic user interface)
•
External (classic user interface)
•
Inbound (classic user interface)
•
Outbound (classic user interface)
•
Scheduled
Contains all the calls that you have scheduled for specific dates/times. The
Scheduled Calls feature is not available to Contact Center agents. In order for
the communication system to execute a scheduled call, myPortal for Desktop
must be open at the scheduled time; your presence status must be Office or
CallMe, and you must confirm the execution of the call in a dialog. If you are
busy at the time the scheduled call is to be made, the communication system
defers the scheduled call until you are free again. myPortal for Desktop
informs you of any pending scheduled calls on exiting the program. On
starting the application, myPortal for Desktop notifies you about any
scheduled calls for which the scheduled time has elapsed. You can then either
delete such calls or save them with a new scheduled time.
Not all folders for call types are available in the modern user interface myPortal
for Desktop.
Grouped by time period (classic user interface)
The calls in all folders are grouped by the same criterion, as selected by you:
•
Date (for example, Today, Yesterday, etc., Last Week, Two Weeks Ago,
Three Weeks Ago, Last Month and Older)
•
Phone number
•
Last Name,First Name
•
First Name, Last Name
•
Company
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
61
Unified Communications
Directories and Journal
The number of Journal entries contained in the group is displayed on the right of
the group designation in parentheses. The grouping by time period is not
available in the modern user interface of myPortal for Desktop.
Call Details
Every call is shown with the date and time and, if available, with the call number.
If a directory contains further details on the call number such as the Last Name,
First Name and Company, then this information is also shown. In addition, the
Direction, Duration and Call Complete columns are also displayed in most
folders. Not all call details are available in the modern user interface of myPortal
for desktop.
Route
Meaning
Inbound
outbound
Call Complete
Meaning
The call was successful or was answered.
Sorting (classic user interface)
You can sort the calls in the Journal by any column in ascending or descending
alphanumeric order. The direction in which the triangle at a column header is
pointing indicates the ascending or descending order. Sorting is not available in
the modern user interface of myPortal for Desktop.
Zooming in on an entry (classic user interface)
You can zoom in on a specific entry one character at a time in the column by which
the entries are sorted. For example, you could jump to the first Last Name starting
with "Sen" one letter at a time. This method can also be used in the results of a
search. Zooming in on an entry is not available in the modern user interface of
myPortal for Desktop.
Retention Period
The communication system saves a record of the calls in the Journal for a
maximum period of time, which can be configured by the administrator. As a
subscriber, you can reduce this time. After the retention period expires, the
communication system automatically deletes all associated entries.
Export
You can export the log data for the current day manually or automatically to a CSV
file. The automatic export is performed:
62
•
on exiting myPortal for Desktop
•
at midnight, provided myPortal for Desktop is active
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
The file is named according to the scheme <phone number>-<yyyymmdd>.csv. If
the file already exists, the data is appended to it. The file contains the journal data
of all call types except Open and Scheduled in the following fields: Start Date,
Start Time, End Date, End Time, From, To, First Name, Last Name, Company,
Direction, Duration, Status and Domain.
Related Topics
Related Topics
• User Interface Elements
•
How to Make a Call from the Journal (Classic User Interface)
•
How to Make a Call from the Journal (Modern User Interface)
•
How to Zoom in on an Entry
•
How to Enable or Disable the Closing of Screen Pops at the End of a Call
•
Presence Status
4.2.3.1 How to Sort the Journal
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on one of the groups: Open, All Calls, Missed, Answered, Internal,
External, Inbound, Outbound or Scheduled.
3) If required, double-click on the triangle on the left of the relevant group to
expand the associated Journal entries.
4) Click on one of the column titles, e.g., Last Name, to sort the Journal entries
by this criterion in ascending alphanumeric order.
5) If you want to reverse the sort order, click again on column header.
Related Topics
Related Topics
• How to Group Journal Entries
•
How to Zoom in on an Entry
4.2.3.2 How to Group Journal Entries
Prerequisites
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
You are working with the classic user interface.
63
Unified Communications
Directories and Journal
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on one of the groups: Open, All Calls, Missed, Answered, Internal,
External, Inbound or Outbound.
3) Select one of the following options in the context menu of any column header:
•
Group By:Date
•
Group By:Phone Number
•
Group By:Last Name, First Name
•
Group By:First Name, Last Name
•
Group By:Company
4) Double-click on the triangle on the left of the relevant group to expand the
associated Journal entries.
Related Topics
Related Topics
• How to Sort the Journal
4.2.3.3 How to Delete Journal Entries
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on one of the groups: All Calls, Missed, etc.
3) If you are working with the classic user interface, double-click on the triangle
on the left of the relevant group to expand the associated Journal entries if
required.
4) Select one of the following options:
•
Click on the relevant entry.
•
Mark the relevant entries.
5) Select Remove in the context menu.
6) Click Yes.
Related Topics
Related Topics
• How to Change the Retention Period for Journal Entries
64
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
4.2.3.4 How to Change the Retention Period for Journal Entries
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
3) Enter the desired retention period in days in the Keep call history for field.
4) Click Save.
Related Topics
Related Topics
• How to Delete Journal Entries
4.2.3.5 How to Add a Scheduled Call
Prerequisites
•
You are not an agent of the Contact Center.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on the Scheduled group.
3) Click Add.
4) Select one of the following options:
•
Enter the phone number in dialable format or in canonical format in the
Phone Number drop-down list.
•
Select a phone number from the Phone Number drop-down list and
press the Enter key.
5) Under Schedule Time, select the time from the list box and the date from
calendar control.
6) If you want to add a text to the scheduled call, enter it in the Notes field.
7) Click Save.
INFO: Alternatively, you can also schedule a call for a party you
cannot reach at the moment for a later point in time directly from
the screen pop of the call.
Related Topics
Related Topics
• How to Edit a Scheduled Call
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
How to Clear a Scheduled Call
65
Unified Communications
Directories and Journal
•
Screen Pops
4.2.3.6 How to Edit a Scheduled Call
Prerequisites
•
You are not an agent of the Contact Center.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on the Scheduled group.
3) Click on the relevant entry.
4) Click Edit.
5) Select one of the following options:
•
Enter the phone number in dialable format or in canonical format in the
Phone Number drop-down list.
•
Select a phone number from the Phone Number drop-down list and
press the Enter key.
6) Under Schedule Time, select the time from the list box and the date from
calendar control.
7) If you want to add a text to the scheduled call, enter it in the Notes field.
8) Click Save.
Related Topics
Related Topics
• How to Add a Scheduled Call
•
How to Clear a Scheduled Call
4.2.3.7 How to Clear a Scheduled Call
Prerequisites
•
You are not an agent of the Contact Center.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on the Scheduled group.
3) Click on the relevant entry.
4) Click on Remove, followed by Yes.
66
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Directories and Journal
Related Topics
Related Topics
• How to Add a Scheduled Call
•
How to Edit a Scheduled Call
4.2.3.8 How to Add Contacts from the Journal to the Personal Directory
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on one of the groups: Open, All Calls, Missed, Answered, Internal,
External, Inbound or Outbound.
3) If required, double-click on the triangle on the left of the relevant group to
expand the associated Journal entries.
4) Click on the relevant entry.
5) Select Copy to personal in the context menu.
6) Enter the contact data in the Personal Contact window.
INFO: Any XMPP ID that may be specified must match the
pattern xmpp:[email protected]
7) Click Save.
Related Topics
Related Topics
• Directories
4.2.3.9 How to Configure the Journal Export
Use the following steps to
•
specify the storage location for manually and automatically exported journal
data
•
control the automatic export of the journal
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
67
Unified Communications
Calls
3) Click Browse.
4) Select the desired folder and click Save.
5) Select one of the following options:
•
If you want to activate the automatic export, select the Enable export
check box.
•
If you want to deactivate the automatic export, clear the Enable export
check box.
6) Click Save.
Related Topics
4.2.3.10 How to Export the Journal Manually
Prerequisites
•
You have specified a location for the exported journal data.
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click Export.
3) Click OK.
Related Topics
4.3 Calls
For calls, convenient features such as a desktop dialer, screen pops and the
option to record calls and conferences (LX/MX) are available to subscribers.
Related Topics
4.3.1 Call Number Formats
Call numbers can be specified in different formats.
68
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
Format
Description
Example
Canonical
Begins with + and always
+49 (89) 7007-98765
includes the country code, area
code and the full remaining
station number. Blanks and the
special characters + ( ) / - : ; are
allowed.
Dialable
Exactly as you would dial the call • 321 (internal)
number on the phone, always
• 0700798765 (own local network)
with the trunk access code.
• 0089700798765 (external local
network)
• 0004989700798765 (international)
INFO: If possible, you should always use the canonical call
number format. This ensures that a phone number is always
complete, unique and consistent in any situation, even in a
network.
When dialing an external station (dialable format) manually, the CO access code
must always be dialed as well. The CO access code must likewise also be
specified when manually entering the destination number for the CallMe service
in myPortal for Desktop and myPortal for Outlook.
When dialing an external phone number in dialable format from a directory and
when using the Desktop Dialer and Clipboard Dialer, the communication system
automatically adds the CO access code (route 1). The automatic addition of the
CO access code also occurs when you select a phone number of your own
personal data (Mobile number, Private Number, External Number 1, External
Number 2, etc.) as a destination number for the CallMe service.
INFO: For calls within the USA via CSTA to a number in canonical
format, phone numbers are converted to the dialable format.
Related Topics
Related Topics
• How to Dial a Number Manually
•
Desktop Dialer and Clipboard Dialer (Windows)
•
How to Enable the Call-Me Service
•
How to Add a Call Forwarding Rule
•
How to Edit a Call Forwarding Rule
•
How to Edit a Profile for the Personal AutoAttendant
•
How to Configure and Initiate an Ad-hoc Conference
•
How to Configure a Scheduled Conference
•
How to Configure a Permanent Conference
•
How to Enable or Disable the Notification by Phone
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
69
Unified Communications
Calls
•
How to Define an Additional Phone Number
4.3.2 Call Functions
You can control call functions with myPortal for Desktop, e.g., accept calls or pick
up calls for another subscriber. You can also dial phone numbers directly from the
Journal, the Favorites list or a directory. The call functions can be controlled both
in screen pops and in the main window.
Related Topics
Related Topics
• Desktop Dialer and Clipboard Dialer (Windows)
•
Screen Pops
4.3.2.1 How to Answer a Call
Step by Step
›
Click in the Inbound Call screen pop on the Answer symbol.
INFO: In the case of an analog or DECT phone, you must lift the
handset.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
4.3.2.2 How to Pick up a Call for Another Subscriber
Step by Step
›
Select one of the following options:
•
Classic user interface:
Click on the Directories tab or window, then on Internal Directory and
on the subscriber being called, and then select Call Pickup from the
context menu.
•
Modern user interface:
Click in the Favorites list on the subscriber being called and select Call
Pickup from the context menu.
70
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
Related Topics
Related Topics
• Directories
•
Favorites list
4.3.2.3 How to Redirect a Call to your Voicemail Box
Prerequisites
•
Screen pops for inbound calls have been activated.
›
Click in the Inbound Call screen pop on the Forward symbol.
Step by Step
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
•
Voicemail Box
4.3.2.4 How to Dial a Number Manually
Step by Step
›
Select one of the following options:
•
Enter the phone number in dialable format or in canonical format in the
drop-down list for phone numbers and press the Enter key.
•
Select a phone number from the drop-down list for phone numbers and
press the Enter key.
Related Topics
Related Topics
• User Interface Elements
•
Call Number Formats
4.3.2.5 How to Call from a Directory (Classic User Interface)
Step by Step
1) Click on the Directories tab or in the corresponding window.
2) Click on one of the directories: Personal Directory, External Directory or
Internal Directory.
3) Select one of the following options:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
71
Unified Communications
Calls
•
Double-click in the relevant directory entry on the desired station number.
•
Click in the context menu of the relevant directory entry on the desired
station number.
Related Topics
Related Topics
• How to Call from a Directory (Modern User Interface)
•
Directories
4.3.2.6 How to Call from a Directory (Modern User Interface)
Step by Step
1) Click on Directories / Search.
2) Enter a search term in the input field.
3) Click on the Search button.
4) Click on the relevant directory entry.
5) Select one of the following options:
•
If you want to use the standard phone number number of the contact, click
on Make Call.
•
If you want to use any other number of the contact, click in the context
menu on the desired number.
Related Topics
Related Topics
• How to Call from a Directory (Classic User Interface)
•
Directories
4.3.2.7 How to Make a Call from the Favorites List (Classic User Interface)
Step by Step
1) If required, double-click on the triangle on the left of the relevant group to
expand the associated entries in the Favorites list.
2) Select one of the following options:
72
•
If you want to use the standard phone number of the Favorites, doubleclick on the relevant subscriber.
•
If you want to use any other number of the Favorites, click in the context
menu of the relevant subscriber on the desired station number.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
Related Topics
Related Topics
• How to Make a Call from the Favorites List (Modern User Interface)
•
Favorites list
•
How to Specify a Default Number for a Favorite
4.3.2.8 How to Make a Call from the Favorites List (Modern User Interface)
Step by Step
1) Click on the Favorites list icon.
2) Click on the relevant contact.
3) Select one of the following options:
•
If you want to use the standard phone number number of the contact, click
on Make Call.
•
If you want to use any other number of the contact, click in the context
menu on the desired number.
Related Topics
Related Topics
• How to Make a Call from the Favorites List (Classic User Interface)
•
Favorites list
•
How to Specify a Default Number for a Favorite
4.3.2.9 How to Make a Call from the Journal (Classic User Interface)
Step by Step
1) Click on the Journal tab or in the corresponding window.
2) Click on one of the folders: Open, All Calls, Missed, Answered, Internal,
External, Inbound or Outbound.
3) If required, double-click on the triangle on the left of the relevant group to
expand the associated Journal entries.
4) Select one of the following options:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
•
If you want to use the standard phone number number of the contact,
double-click on the relevant journal entry.
•
If you want to use any other number of the contact, click in the context
menu of the relevant journal entry on the desired number.
73
Unified Communications
Calls
Related Topics
Related Topics
• How to Make a Call from the Journal (Modern User Interface)
•
Journal
4.3.2.10 How to Make a Call from the Journal (Modern User Interface)
Step by Step
1) Click Journal.
2) Click on one of the folders: All Calls, Missed, etc.
3) Click on the relevant journal entry.
4) Select one of the following options:
•
If you want to use the standard phone number, click Make Call.
•
If you want to use any other available number of the contact, click in the
context menu on the desired number.
Related Topics
Related Topics
• How to Make a Call from the Journal (Classic User Interface)
•
Journal
4.3.2.11 How to Transfer a Call
Prerequisites
•
Screen pops for inbound and outbound calls have been activated.
Step by Step
1) Click on Transfer in the Inbound Call and Outbound Call to … screen pops.
2) Click on the desired subscriber in the subscriber list and then on Transfer.
3) If you receive a window with the prompt: Does the other party wish
to accept this call?, click Yes.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
74
•
How to Enable or Disable Screen Pops on Outbound Calls
•
How to Configure the Transfer Method
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
4.3.2.12 How to Place a Call on Hold
Prerequisites
•
Screen pops for inbound and outbound calls have been activated.
Step by Step
1) Click on the Hold symbol in the Inbound Call and Outbound Call to …
screen pops.
2) When you want to resume (unhold) the call, click on the Reconnect symbol.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
•
How to Enable or Disable Screen Pops on Outbound Calls
4.3.2.13 How to Record a Call or a Conference
Prerequisites
•
Live recording is enabled in the communication system.
•
Screen pops for inbound and outbound calls have been activated.
•
You are currently conducting a call or participating in a conference as a
conference controller.
Step by Step
1) Click on the Record symbol in the Inbound Call and Outbound Call to …
screen pops.
2) If you want to stop the recording before the call ends, click on the Stop Live
Recording symbol.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
•
How to Enable or Disable Screen Pops on Outbound Calls
•
Ad-hoc Conference
•
Scheduled Conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
75
Unified Communications
Calls
4.3.2.14 How to Start Web Collaboration During a Call
Prerequisites
•
You are working under Windows.
•
Screen pops for inbound and outbound calls have been activated.
›
Click on the Web Collaboration symbol in the Inbound Call and Outbound
Call to … screen pops.
Step by Step
Related Topics
Related Topics
• Screen Pops
•
Web Collaboration Integration
4.3.2.15 How to End a Call
Step by Step
›
Select one of the following options:
INFO: In the case of an analog or DECT phone, you must hang
up the handset.
•
Click on the Hang Up symbol in the Inbound Call and Outbound Call
to … screen pops.
•
Click on Hang Up in the main window.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops on Inbound Calls
•
How to Enable or Disable Screen Pops on Outbound Calls
4.3.3 Desktop Dialer and Clipboard Dialer (Windows)
Using the Desktop Dialer and Clipboard Dialer, you can call a selected destination
or a destination copied to the Windows clipboard from many Windows
applications such as an editor or an Outlook e-mail.
Depending on the type of string used, the Dialer works as follows:
•
76
A phone number in canonical format is dialed directly.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
•
A station number in dialable format is dialed directly if the communication
system can decide whether an internal or external destination is involved.
Otherwise, the user is asked to make the appropriate selection.
•
A string containing letters is searched in the directories as a first name or
company.
Windows applications that were implemented with standard Windows-compliant
components usually support the Desktop Dialer and Clipboard Dialer, but 16-bit
applications do not.
Related Topics
Related Topics
• Call Number Formats
•
Call Functions
4.3.3.1 How to Make a Call via the Desktop Dialer or Clipboard Dialer
Prerequisites
•
You are working under Windows.
•
You have marked the desired string (Desktop Dialer) or the desired string has
been copied to the Windows clipboard (Clipboard Dialer).
INFO: For applications that do not support the Desktop Dialer,
e.g., 64-bit editions of Microsoft Office 2010, you can try the
Clipboard Dialer instead.
Step by Step
1) Select one of the following options:
•
If you want to use the Desktop Dialer, press the key/mouse combination
configured for it (Ctrl + right mouse button by default). If the string is a
phone number, it is dialed.
•
If you want to use the Clipboard Dialer, press the key combination
configured for it (Shift + Ctrl + D by default). If the string is a phone
number, it is dialed.
INFO: If you want to cancel the dialing of a number, click within
five seconds in the Desktop Dialing screen pop on the Close
symbol.
2) If the string contains letters, click in the Search results in the Directories
window on the number to be dialed in the context menu of the desired contact.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
77
Unified Communications
Calls
Related Topics
Related Topics
• How to Change the Key Combination for the Desktop Dialer or Clipboard
Dialer
4.3.3.2 How to Enable or Disable the Desktop Dialer or Clipboard Dialer
Prerequisites
•
You are working under Windows.
Step by Step
1) Click Setup.
2) Click on My Preferences > Hot Keys.
3) Select one of the following options:
•
If you want to enable the Desktop Dialer, select the Hot Key Enabled
check box for via Desktop.
•
If you want to disable the Desktop Dialer, clear the Hot Key Enabled
check box for via Desktop.
4) Select one of the following options:
•
If you want to enable the Clipboard Dialer, select the Hot Key Enabled
check box for via Clipboard.
•
If you want to disable the Clipboard Dialer, clear the Hot Key Enabled
check box for via Clipboard.
5) Click Save.
Related Topics
4.3.3.3 How to Change the Key Combination for the Desktop Dialer or Clipboard Dialer
Prerequisites
•
You are working under Windows.
Follow these steps if the configured key combination does not start the Dialer.
Step by Step
1) Click Setup.
2) Click on My Preferences > Hot Keys.
3) Select one of the following options:
•
78
If you want to change the key combination for the Desktop Dialer, click in
the rectangular field on via Desktop.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
•
4)
If you want to change the key combination for the Clipboard Dialer, click
in the rectangular field on via Clipboard.
Select one of the following options:
•
If you want to change the key/mouse combination for the Desktop Dialer,
hold down one or more of the Shift, Ctrl and Alt keys and then click
the additional mouse button desired.
•
If you want to change the key combination for the Clipboard Dialer, hold
down one or more of the Shift, Ctrl and Alt keys and then press the
additional key desired for the key combination.
5) Click Save.
After this, the key combination defined in step 3 can be used to start the Dialer.
Related Topics
Related Topics
• How to Make a Call via the Desktop Dialer or Clipboard Dialer
4.3.4 Screen Pops
Screen pops (also called tray pops or pop-up windows) offer you convenient ways
to respond to incoming calls or new voicemails with a single click, for example.
A screen pop appears in the lower right corner of the screen. You can enable or
disable screen pops by different methods. Some buttons in the screen pops
change, depending on the situation. You can control functions in screen pops via
the keyboard (TAB or arrow keys and Enter). You can also minimize screen pops
to an icon on the task bar.
INFO: The Windows task bar on a Citrix server client should only
be operated at 1 height unit so that pop-ups remain visible and
easily accessible
Screen Pop for Incoming Call
Screen pops show the caller's phone number and name (if the name details are
available in a directory). The directories are searched in the following order:
Personal Directory, Internal Directory, External Offline Directory and External
Directory. The first hit, if found, is shown in the screen pop. The following functions
are available:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
79
Unified Communications
Calls
Symbol
Function
• During incoming call: Accept (pick up)
• During ongoing call: Hang Up
Forward to voicemail box
During ongoing call: Transfer, after entering a number to be dialed or a
name to be found
Hold
Record, if enabled in the communication system
E-mail to the communication partner
XMPP to the communication partner; the presence status of the
communication partner is displayed if available
Scheduled call
Web Collaboration
Opening the Main Window on Inbound Calls
You can select whether myPortal for Desktop should automatically open the main
window for an inbound call.
Closing Screen Pops on Call Termination
You can have screen pops (also called tray pops) automatically closed at the end
of a call. If you want to be notified about missed calls by a screen pop, deactivate
this function. As soon as more than three screen pops are opened for calls, they
are minimized and shown as icons on the task bar.
Screen Pop for Outgoing Call
Screen pops show the caller's phone number and name (if the name details are
available in a directory). The following functions are available:
Symbol
Function
Hang Up
During ongoing call: Transfer, after entering a number to be dialed or a
name to be found
Hold
80
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
Symbol
Function
Record, if enabled in the communication system
E-mail to the communication partner
XMPP to the communication partner; the presence status of the
communication partner is displayed if available
Scheduled call
Web Collaboration
Screen Pop for New Voicemails
Screen pops show the caller's phone number and name (if the name details are
available in a directory) as well as the date and time the call was received. This
can only be activated collectively for voicemails and fax messages. The following
functions are available:
•
Rewind (Windows)
•
Play (Through Speakers) and Pause
•
Stop
•
Forward (Windows)
•
E-mail
•
Instant Messaging
•
Play Through Phone
Screen Pop for new Fax Message
This screen pop shows the sender's phone number and name (if the name details
are available in a directory) as well as the date and time the call was received.
This can only be activated collectively for voicemails and fax messages. The
following functions are available:
Symbol
Function
View
Close
Screen Pop after Sending a Fax Message
This screen pop shows the date and time as well as the number of successful or
failed transmissions. This type of screen pop only appears if myPortal for Desktop
is open when sending fax messages. The following functions are available:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
81
Unified Communications
Calls
Symbol
Function
View
Close
Screen Pop with Overview on Starting myPortal for Desktop myPortal
(Classic User Interface)
This screen pop appears on starting myPortal for Desktop and shows an overview
with the respective number of
•
New voicemails
•
New Fax messages
•
Open calls
You can jump to the specific details by clicking on each item.
If your presence status is not Office, you will receive a corresponding message.
Screen Pop on Overdue Presence Status
The screen pop is displayed if your presence status is not Office, and the
scheduled time of your return has passed. If you close the screen pop, it will
reappear after one hour if your presence status is still overdue. The following
functions are available:
Symbol
Function
Change the presence status to Office
Close
Related Topics
Related Topics
• User Interface Elements
82
•
Call Functions
•
Directories
•
How to Add a Scheduled Call
•
How to Enable or Disable Screen Pops on Changing the Presence Status
•
Instant Messaging
•
Voicemail Box
•
Fax Box
•
How to Start Web Collaboration During a Call
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
4.3.4.1 How to Enable or Disable Screen Pops on Inbound Calls
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable screen pops on inbound calls, select the check box
Display tray pop on inbound calls.
•
If you want to disable screen pops on inbound calls, clear the check box
Display tray pop on inbound calls.
4) Click Save.
Related Topics
Related Topics
• How to Answer a Call
•
How to Redirect a Call to your Voicemail Box
•
How to Transfer a Call
•
How to Place a Call on Hold
•
How to Record a Call or a Conference
•
How to End a Call
4.3.4.2 How to Enable or Disable the Opening of the Main Window on Inbound Calls
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable the opening of the main window on inbound calls,
select the check box Pop up application on inbound calls.
•
If you want to disable the opening of the main window on inbound calls,
clear the check box Pop up application on inbound calls.
4) Click Save.
Related Topics
Related Topics
• Directories
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
83
Unified Communications
Calls
4.3.4.3 How to Enable or Disable Screen Pops on Outbound Calls
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable screen pops on inbound calls, select the check box
Display tray pop on inbound calls.
•
If you want to disable screen pops for inbound calls, clear the check box
Display tray pop on inbound calls.
4) Click Save.
Related Topics
Related Topics
• How to Transfer a Call
•
How to Place a Call on Hold
•
How to Record a Call or a Conference
•
How to End a Call
4.3.4.4 How to Enable or Disable the Closing of Screen Pops at the End of a Call
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable the closing of screen pops at the end of a call, select
the check box Close tray pop on call termination.
•
If you want to disable the closing of screen pops at the end of a call, clear
the check box Close tray pop on call termination.
4) Click Save.
Related Topics
Related Topics
• Journal
84
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Calls
4.3.4.5 How to Enable or Disable Screen Pops for New Voicemails
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable screen pops on new voicemails, select the check
box Display tray pop on new voice mail.
•
If you want to disable screen pops on new voicemails, clear the check box
Display tray pop on new voice mail.
4) Click Save.
Related Topics
Related Topics
• Voicemail Box
•
How to Enable or Disable the Opening of the Messages Window for New
Voicemails
•
Voicemail Box
•
Fax Box
4.3.4.6 How to Enable or Disable Screen Pops for New Fax Messages
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable screen pops on receiving new fax messages, select
the check box Display tray pop on new fax message.
•
If you want to disable screen pops on receiving new fax messages, clear
the check box Display tray pop on new fax message.
4) Click Save.
Related Topics
Related Topics
• Fax Box
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
How to Enable or Disable the Opening of the Messages Window for New Fax
Messages
85
Unified Communications
Calls
4.3.4.7 How to Enable or Disable the Opening of the Messages Window for New
Voicemails
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable the opening of the messages window on receiving a
new voicemail, select the check box Screenpop the messages window
when I receive a new voicemail message.
•
If you want to disable the opening of the messages window on receiving
a new voicemail, clear the check box Screenpop the messages window
when I receive a new voicemail message.
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops for New Voicemails
4.3.4.8 How to Enable or Disable the Opening of the Messages Window for New Fax
Messages
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable the opening of the messages window on receiving a
new fax message, select the check box Open the messages window
when I receive a new fax message.
•
If you want to disable the opening of the messages window on receiving
a new fax message, clear the check box Open the messages window
when I receive a new fax message.
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable Screen Pops for New Fax Messages
86
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
4.3.4.9 How to Enable or Disable the Screen Pop with an Overview on Starting
myPortal for Desktop
Prerequisites
•
You are working with the classic user interface.
Follow these steps to enable or disable the screen pop that appears on starting
myPortal for Desktop with an overview of the relevant number of new voicemails,
new fax messages, open calls, and possible indication of any absence.
Step by Step
1) Click Setup.
2) Click on My Preferences > Notifications.
3) Select one of the following options:
•
If you want to enable the screen pop that appears with an overview on
starting myPortal for Desktop, select the check box Display the
'Overview' when the application starts up.
•
If you want to disable the screen pop that appears with an overview on
starting myPortal for Desktop, clear the check box Display the
'Overview' when the application starts up.
4) Click Save.
Related Topics
4.4 Conferencing (not with OpenScape Office HX)
In a conference, multiple participants (including external parties) can
communicate with one another at the same time. The Conference Management
function of myPortal for Desktop enables you to quickly and easily host different
types of conferences and also to schedule them in advance.
Types of Conferences
The different types of conferences offer the following features:
Ad-hoc
Usage
• Phone-controlled
• Applicationcontrolled
Scheduled
Permanent
Open
• Applicationcontrolled
• Applicationcontrolled
• Applicationcontrolled
Start
• Manually
• Scheduled
• Manually
• Manually
End
• Manually
• Scheduled
• Manually
• Manually
• Manually
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
87
Unified Communications
Conferencing (not with OpenScape Office HX)
Ad-hoc
Scheduled
Permanent
Open
Duration of the
reservation of
conference channels
• 1 hour by default
• Scheduled
• Until the
deactivation or
deletion of the
conference
• Until the
deactivation or
deletion of the
conference
Extension
-
x
-
-
Recurrence
• Manually
• Scheduled
-
-
Direction of connection • Outbound
setup from the
viewpoint of the system
• Outbound
• Inbound
• Inbound
Set of participants
• Fixed
• Fixed
• Open
• Individual
conference ID
(optional)
• Individual
conference ID
(optional)
• Shared conference
ID (optional)
• Inbound
• Fixed
Authentication of
conference participants
• Password (optional) • Password (optional)
Recording, if enabled in • Manually (On
the system
Demand
Conference
Recording)
• Automatically (Auto
Conference
Recording)
• Automatically (Auto
Conference
Recording)
• Automatically (Auto
Conference
Recording)
• Manually (On
Demand
Conference
Recording)
• Manually (On
Demand
Conference
Recording)
• Manually (On
Demand
Conference
Recording)
Invitation by E-mail
with:
• Conference Name
• Conference Name
• Conference Name
• Conference Name
• Link for Web
Collaboration
session
• Dial-in number
• Dial-in number
• Dial-in number
• Conference ID
• Conference ID
• Conference ID
• Password
• Password
• Password
• Date and time of the
start and end of the
conference
• Link for Web
Collaboration
session
• Link for Web
Collaboration
session
Outlook appointment as an e-mail attachment
(.ics)
x
-
-
Application-controlled conference
As a subscriber, you can initiate, control and manage a conference with the
Conference Management feature of myPortal for Desktop or
myPortal for Outlook. Conference Management requires the Comfort Plus User
license.
Phone-controlled Conference
As a subscriber, you can initiate a phone-controlled conference and then control
it via the phone by the following methods:
•
88
Call the desired conference participant and connect him or her to the
conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
•
Extend a consultation call into a conference
•
Extend a second call into a conference
Virtual conference room
The virtual conference room enables you to follow a conference and its
participants in a graphical environment and to also manage the conference if you
are the conference controller. The virtual conference room shows the phone
number, name and presence status to the conference participants, where
available. The virtual conference room is only available in the classic user
interface. Corresponding functions are available in the workspace of the modern
user interface.
Symbol
Meaning
Conference controller
Communication system – Conference is stopped
Communication system – Conference is being started
Communication system – Conference has started
Communication system – Conference is being recorded
Communication system – Conference is being recorded
and
alternately
Communication system – Conference is being stopped
Scheduled conference participant (symbol in accordance with current
Presence status)
Called conference participant
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
89
Unified Communications
Conferencing (not with OpenScape Office HX)
Symbol
Meaning
Dial-in conference participant
Authenticating conference participant
Connected conference participant
Every arrow between the communication system and the conference controller or
its participants indicates the direction of the connection setup from the viewpoint
of the communication system.
•
Outbound:
The communication system calls the participant. Note that this applies to
internal participants only if the subscriber has not enabled forwarding to
voicemail.
•
Inbound:
The conference participants or conference controller dials into the conference
using the dial-in number.
While participating in a conference, making a call or accepting another call
disconnects the participant from the conference.
Dial-in Number
The administrator can change the conference dial-in numbers that were set up
during the basic installation. You can display the dial-in number for a conference.
Conference Controller
The initiator of a conference is automatically the conference controller until this is
explicitly changed. Depending on the type of conference, the controller can:
90
•
Add or remove conference participants:
Removed participants do not remain in the conference.
•
Disconnect or reconnect conference participants:
Disconnected participants remain in the conference. When the conference
controller is connecting a conference participant, all other conference
participants remain connected to one another. If there is only one participant
connected, that participant will hear music on hold.
•
Record a conference
Conferences in which a participant is on hold cannot be recorded.
•
Set another internal participant on the same node as the conference controller
•
Leave the conference without ending it:
The longest attending internal participant of the conference automatically
becomes the conference controller.
•
End the conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
Conference Tone
When connecting or disconnecting a conference participant, the other participants
hear the conference tone. The administrator can activate or deactivate the
conference tone.
Conference Participants
Conference participants can leave the conference and optionally dial-into it again
(scheduled and permanent conferences). As long as a conference has only one
participant, the participant hears music on hold. The administrator can specify
whether multiple external conference participants are allowed. The maximum
number of external conference participants is determined, among other things, by
the number of available trunks.
Automatic Termination without a Conference Controller
If there are only external subscribers left in a conference, the participants will hear
an alert tone after a specified time period. Following a further timeout, the
conference is automatically terminated by the communication system. The
administrator can change these timeouts.
Notification by E-mail and Outlook Appointment
The system can automatically notify conference participants by e-mail and, for
scheduled conferences, additionally through an Outlook appointment as an
attachment (.ics):
Event
New conference
Notified conference
participants
All
Outlook appointment
Automatic creation
Delete the conference
Automatic deletion
Reschedule the conference
Automatic update
Adding conference
participants
Remove conference
participants
Those affected
Automatic creation (those
affected)
Automatic deletion (those
affected)
This requires the administrator to have configured the sending of e-mails. In
addition, an internal conference participant must have specified his or her e-mail
address. For external conference participants, the initiator of the conference must
enter their individual e-mail addresses.
INFO: For e-mail notifications, no return acknowledgments are
obtained for failed deliveries or absence messages, since the emails are sent directly from the system due to the integration of
Web Collaboration.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
91
Unified Communications
Conferencing (not with OpenScape Office HX)
Further Calls
While participating in a conference, making a call or accepting another call
disconnects the participant from the conference.
Park, Toggle/Connect
The Park and Toggle/Connect features are not available in a conference.
Call Charges
Toll charges are assigned to the party who set up the toll call. When a conference
is transferred to another conference controller, all further charges are assigned to
that controller.
Video Monitoring
Any ongoing video transmission, e.g., with OpenScape Personal Edition, must be
terminated before participating in a conference.
Related Topics
Related Topics
• User Interface Elements
•
Web Collaboration Integration
•
How to Specify an E-Mail Address
4.4.1 Ad-hoc Conference
An ad-hoc conference occurs spontaneously and is started manually by the
conference controller. The conference controller can save ad-hoc conferences in
order to set them up again at some later point in time.
Starting the Conference
The system opens the window with the virtual conference room automatically for
all internal conference participants, provided they have started
myPortal for Desktop with the classic user interface or myPortal for Outlook. The
system calls all conference participants simultaneously. On joining the
conference, each conference participant hears a greeting announcement with the
name of the conference controller.
Recording the Conference
Conference controllers can record a conference manually for themselves or for all
connected internal conference participants, provided the live recording of calls
has been activated in the system. Participants located in the own node receive
the recording in the voicemail box; participants in other nodes, via e-mail. The
duration of the recording is only limited by the available storage capacity of the
system.
92
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
Ending the Conference
The conference controller can end the conference in the client or simply hang up.
Alternatively, the conference ends when all conference participants have left the
conference.
Related Topics
Related Topics
• How to Record a Call or a Conference
4.4.1.1 How to Configure and Initiate an Ad-hoc Conference
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click Conference.
2) Click AdHoc Conference. The AdHoc Conference window opens with you
set as the conference controller.
3) Add any conference participants as needed; see How to Add Conference
Participants for details.
4) Click in the AdHoc Conference window on Conference Room > Start. The
system now calls you and all other conference participants.
5) If you want to use OpenScape Web Collaboration in this conference, click on
Collaboration > Start Collaboration.
6) If you want to repeat the ad-hoc conference with the same set of participants
later, you can now save it. To do this:
a) Click on Conference Room > Save As.
b) Enter the Conference Name.
c) Click Save.
Related Topics
Related Topics
• Call Number Formats
•
How to End an Ad-hoc or Scheduled Conference
•
How to Repeat an Ad-hoc Conference
•
How to Delete an Ad-hoc Conference
•
How to Add Conference Participants
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
93
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.1.2 How to Display your Own Ad-hoc Conference
Prerequisites
•
You are working with the classic user interface.
•
You have saved an ad-hoc conference.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click View.
Related Topics
4.4.1.3 How to Add Conference Participants
Prerequisites
•
You are working with the classic user interface.
•
A conference with you as the conference controller has been started in the
virtual conference room.
›
Add the conference participants by one of the following methods:
Step by Step
•
From the Favorites list:
Using the mouse, drag one of the participants from the Favorites into the
AdHoc Conference window. Select a station number from the Number
To Contact drop-down list in the Select Participant Contact Number
window and click OK.
•
From a directory:
Using the mouse, drag one of the participants from the Directories into
the AdHoc Conference window. Select a station number from the
Number To Contact drop-down list in the Select Participant Contact
Number window and click OK.
•
From the results of a search:
Search the directories (see How to Search in Directories (Classic User
Interface) ) and then drag any of the participants from the listed results into
the AdHoc Conference window. Select a station number from the
Number To Contact drop-down list in the Select Participant Contact
Number window and click OK.
94
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
•
Any participant:
Click in the AdHoc Conference window on Participants > Add
Participant. Enter the following details for the participant in the Add
Participants window: Name, Phone Number in dialable format or in
canonical format and E-mail and then click OK.
Related Topics
Related Topics
• Directories
•
How to Search in Directories (Classic User Interface)
•
How to Search in Directories (Modern User Interface)
•
Favorites list
•
How to Configure and Initiate an Ad-hoc Conference
•
How to Configure a Scheduled Conference
•
How to Configure a Permanent Conference
•
How to Remove Conference Participants
•
Scheduled Conference
•
Permanent Conference
4.4.1.4 How to Disconnect a Conference Participant
Prerequisites
•
You are working with the classic user interface.
•
An active conference with you as the conference controller has been started
in the virtual conference room.
›
Click in the context menu of the relevant conference participant on
Disconnect > Disconnect Participant.
Step by Step
The connection to the participant is cleared, but the participant remains in the
conference.
Related Topics
Related Topics
• How to Reconnect Conference Participants
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Scheduled Conference
95
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.1.5 How to Reconnect Conference Participants
Prerequisites
•
You are working with the classic user interface.
•
An active conference with you as the conference controller has been started
in the virtual conference room.
›
Click in the context menu of the relevant conference participant on
Reconnect Participant.
Step by Step
Related Topics
Related Topics
• How to Disconnect a Conference Participant
•
Scheduled Conference
4.4.1.6 How to Remove Conference Participants
Prerequisites
•
You are working with the classic user interface.
•
A conference with you as the conference controller has been started in the
virtual conference room.
›
Select one of the following options in the context menu of the relevant
conference participant:
Step by Step
•
If the conference participant is currently active, click Remove.
•
If the conference participant is not currently active in the conference, click
on Disconnect > Disconnect and Remove Participant.
The connection to the participant is cleared, and the participant is removed from
the conference.
Related Topics
Related Topics
• How to Add Conference Participants
96
•
Scheduled Conference
•
Permanent Conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.1.7 How to Specify another Conference Controller
Prerequisites
•
You are working with the classic user interface.
•
A conference with you as the conference controller has been started in the
virtual conference room.
•
The new conference controller is an internal subscriber from the same node.
INFO: A different conference controller for an associated Web
Collaboration session, for example, can only be set there.
Step by Step
1) Click in the virtual conference room on Properties in the context menu of the
conference participant that you want to set as the conference controller.
2) Click on Set as conference controller.
3) Click Save.
Related Topics
Related Topics
• Scheduled Conference
•
Permanent Conference
4.4.1.8 How to End an Ad-hoc or Scheduled Conference
Prerequisites
•
You are working with the classic user interface.
•
An active conference with you as the conference controller has been started
in the virtual conference room.
INFO: You can end an ad-hoc conference in any event by
hanging up.
Step by Step
1) Click Conference Room > Stop.
2) Under End In, enter the waiting time in seconds until the conference is to be
terminated and then click OK.
Related Topics
Related Topics
• How to Configure and Initiate an Ad-hoc Conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
97
Unified Communications
Conferencing (not with OpenScape Office HX)
•
Scheduled Conference
4.4.1.9 How to Repeat an Ad-hoc Conference
Prerequisites
•
You are working with the classic user interface.
•
You have saved an ad-hoc conference under a specified name.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on a conference under Conference Name.
5) Click Start Conference. The communication system now calls you and the
conference participants.
Related Topics
Related Topics
• How to Configure and Initiate an Ad-hoc Conference
4.4.1.10 How to Delete an Ad-hoc Conference
Prerequisites
•
You have saved an ad-hoc conference under a specified name.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on a conference under Conference Name.
5) Click Remove. If the conference has already started, it is terminated.
Related Topics
Related Topics
• How to Configure and Initiate an Ad-hoc Conference
98
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.2 Scheduled Conference
A scheduled conference (Meet-Me conference) occurs at some point in the future
with a defined duration and may be set up to recur repeatedly at the same time.
A scheduled conference will run for the entire scheduled duration even if there are
no connected participants. The conference controller saves a scheduled
conference under a specified name.
Options for Configuring a Scheduled Conference
The initiator of the conference can define the following properties:
•
Start time and End time
•
Recurring conference
•
Presence of conference controller required
•
Authentication of conference participants on joining the conference required
(by entering a conference ID and password via the phone keypad).
INFO: Mobility Entry users must enter the code for DTMF suffix
dialing before their authentication.
The default password for conferences is 123456. The conference controller
can change this for the conference participants individually.
•
Language of the announcements and invitations by e-mail (by default, this is
the language of the voicemail box).
•
Direction for the connection setup for each conference participant (default:
outbound).
Starting the Conference
The system opens the window with the virtual conference room at the scheduled
time automatically for all internal conference participants, provided they have
started myPortal for Desktop with the classic user interface or
myPortal for Outlook. If the presence of the conference controller is required, the
system first calls the controller. After the successful authentication of the
controller, all the other conference participants are called simultaneously.
Conference participants who have forwarded their calls to their voicemail boxes
or who are determined to be absent by their presence status are not called.
Depending on how the connection setup has been configured, the system calls
the conference participants or the participants can dial in themselves. The system
announces every participant who joins the conference by name, as in: "... has
joined the conference", provided the initiator has recorded his or her name
announcement.
INFO: In order to enable the participants of a conference you
have scheduled without authentication to hear the name
announcement at the start of the conference, you will need to
have first already initiated a conference with authentication on
one occasion.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
99
Unified Communications
Conferencing (not with OpenScape Office HX)
Dialing In
Every conference participant can use the dial-in number to dial into the
conference within the scheduled time period, regardless of which direction for the
conference setup was set for that participant. Attempts to dial into the conference
outside the scheduled time period result in a corresponding announcement.
Forcing Authentication with the Star (*) Key
The conference controller can set the conference so that each conference
participant is forced to provide authentication by at least by pressing the * key.
This ensures that only the participants who are actually present are connected to
the conference, as opposed to a voicemail box, for example.
Extending the Conference
Ten minutes before the scheduled end of the conference, the participants hear an
announcement indicating that the conference is about to end and are offered the
option of extending the conference by dialing a specific digit. Any conference
participant can extend the conference by dialing that specific digit. The
conference controller can extend the conference in myPortal for Outlook at any
time.
Recording the Conference
Conference controllers can record a conference automatically or manually for
themselves or for all connected internal conference participants, provided the live
recording of calls has been activated in the system. Participants located in the
own node receive the recording in the voicemail box; participants in other nodes,
via e-mail. The duration of the recording is only limited by the available storage
capacity of the system.
Ending the Conference
The conference ends at the time scheduled for the end of the conference or if the
conference controller terminates the conference.
Related Topics
Related Topics
• How to Add Conference Participants
100
•
How to Disconnect a Conference Participant
•
How to Reconnect Conference Participants
•
How to Remove Conference Participants
•
How to Specify another Conference Controller
•
How to Record a Call or a Conference
•
How to End an Ad-hoc or Scheduled Conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.2.1 How to Configure a Scheduled Conference
Prerequisites
•
You are working with the classic user interface.
•
Your administrator has configured a dial-in number for conferences.
Step by Step
1) Click Conference.
2) Click AdHoc Conference. The AdHoc Conference window opens with you
set as the conference controller.
3) Add any conference participants as needed; see How to Add Conference
Participants for details.
4) If you want to change the direction of the connection setup for a conference
participant, proceed in the following steps:
a) Click in the context menu of the relevant conference participant on
Properties.
b) Under Direction, click on Outbound or Inbound to change the direction.
5) In the AdHoc Conference window, click on File > Save.
6) Enter the Conference Name.
7) Enter a Start Date.
8) Enter a Start Time.
9) Enter the End Time.
10) If the conference is to occur repeatedly, select the Recurring Conference
check box.
a) Select an End Date for the conference series.
b) Click on either Daily Recurrence, Weekly Recurrence or Monthly
Recurrence and then select any additional options from the details on the
right-hand side.
11) If you want to delete a conference appointment time for a conference series,
perform the following steps:
a) Click Exceptions.
b) Click Add.
c) Select the relevant date in the Original Date/Time drop-down list.
d) Click on Remove this recurrence.
e) Click OK.
f)
Click Cancel.
12) If you want to reschedule a conference appointment for a conference series,
perform the following steps:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
101
Unified Communications
Conferencing (not with OpenScape Office HX)
a) Click Exceptions.
b) Click Add.
c) Select the relevant date in the Original Date/Time drop-down list.
d) Click on Reschedule this recurrence.
e) Select a New scheduled date.
f)
Select a new Start Time.
g) Click OK.
h) Click Cancel.
13) Click OK.
14) Click Advanced.
15) Select one of the following options in the Conference Type drop-down list:
•
If you want to mandate the authentication of the conference participants
using passwords, select Meet-Me Conference.
•
If you want to waive the authentication requirement for the conference
participants using passwords, select Meet-Me Conference (No
Password).
16) Select the desired Conference Language for the announcements and the
invitations by e-mail (by default, this is the language the voicemail box).
17) Enable the check box This conference is active.
18) If you want the conference to occur only when the conference controller is
present, enable the check box This conference requires the controller to
be present.
19) If you want to force the conference participants to authenticate by pressing
the * (star) key, select the check box Force called participant to enter "*"
(star) to join the conference.
INFO: This option is recommended if the conference participants
do not have to authenticate via a password. This ensures that only
the participants who are actually present are connected to the
conference, as opposed to a voicemail box, for example.
20) If you want to use Web Collaboration concurrently with this conference, select
the Automatically start phone conference with web collaboration check
box.
21) If you want the system to automatically record the conference, select the
Automatically record this conference check box.
22) If you want the e-mail invitations to be sent automatically to the conference
participants, select the check box Automatically send email invitation to
conference participants.
23) If you want to add some introductory text to the invitation e-mail, enter this in
the Notes.
102
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
24) Click Save.
25) Click Send to all. The invitation e-mails will now be sent.
Related Topics
Related Topics
• Call Number Formats
•
How to Add Conference Participants
•
How to Delete a Scheduled or Open Conference
4.4.2.2 How to Display your Own Scheduled Conference
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) If you want to display the virtual conference room, click View.
6) Select one of the following options:
•
If you want to view the schedule of the conference, click on Edit.
•
If you want to view the general settings of the conference, click on Edit
and then on Advanced.
Related Topics
Related Topics
• How To Display a Scheduled, Permanent or Open Conference as the
Conference Controller
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
103
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.2.3 How to Determine the Dial-in Number for a Scheduled, Permanent or Open
Conference
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller.
INFO: As the conference controller, you can obtain the dial-in
number from the e-mail with the invitation to the conference.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click Edit.
6) The dial-in number can be found under Conference DID.
7) Click Cancel.
8) Click Close.
Related Topics
Related Topics
• Permanent Conference
4.4.2.4 How to Determine the Conference ID for a Scheduled or Permanent Conference
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller.
INFO: As the conference controller, you can obtain the
conference ID from the e-mail with the invitation to the
conference.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
104
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
3) Click on the My Conferences tab.
4) Click on a conference under Conference Name.
5) Click Edit.
6) Click in the context menu of the relevant conference participant on
Properties. The Conference ID is displayed.
7) Click Cancel.
8) Click Close.
Related Topics
Related Topics
• Permanent Conference
4.4.2.5 How to Change the Password for a Scheduled or Permanent Conference
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on a conference under Conference Name.
5) Click Edit.
6) Click in the context menu of the relevant conference participant on
Properties.
7) Enter the new Password.
8) Click OK.
9) Click Save.
10) Click Close.
Related Topics
Related Topics
• Permanent Conference
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
105
Unified Communications
Conferencing (not with OpenScape Office HX)
4.4.2.6 How To Display a Scheduled, Permanent or Open Conference as the Conference
Controller
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the Conferences that I belong to tab.
4) Click on a conference under Conference Name and then on View.
Related Topics
Related Topics
• How to Display your Own Scheduled Conference
•
Permanent Conference
•
How to Display your Own Permanent or Open Conference
4.4.2.7 How to Extend a Scheduled Conference
Prerequisites
•
You are working with the classic user interface.
•
An active conference with you as the conference controller has been started
in the virtual conference room.
›
Under Conference Room > Extend Conference, select one of the following
methods:
Step by Step
•
Click on one of the entries 10 minutes, 20 minutes, 30 minutes or 1
hour.
•
Then click on More, enter the desired time period for the extension under
Extend by in minutes, and click OK.
Related Topics
4.4.2.8 How to Reschedule a Scheduled Conference
Prerequisites
106
•
You are working with the classic user interface.
•
You are the conference controller.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click Edit.
6) Select a new Start Date.
7) Select a new Start Time.
8) Select a new End Time.
9) Click Advanced.
10) Select the Automatically send email invitation to conference participants
check box.
11) Click Save.
12) Click Close.
Related Topics
4.4.2.9 How to Delete a Scheduled or Open Conference
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click on Remove, followed by Close.
Related Topics
Related Topics
• How to Configure a Scheduled Conference
4.4.2.10 How to Reschedule a Conference Appointment for a Conference Series
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller of the scheduled conference.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
107
Unified Communications
Conferencing (not with OpenScape Office HX)
Step by Step
1) Click on the Conference symbol.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click Edit.
6) Clear the Recurring Conference check box and select it again.
7) Click Exceptions.
8) Click Add.
9) Select the relevant conference appointment in the Original Date/Time dropdown list.
10) Click on Reschedule this recurrence.
11) Click OK.
12) Select a New scheduled date.
13) Select a new Start Time.
14) Click OK.
15) Click Cancel.
16) Click OK.
17) Click Advanced.
18) If you want to add some introductory text to the invitation e-mail, click in the
Notes input field and enter the desired text.
19) Click Save.
Related Topics
4.4.2.11 How to Delete a Conference Appointment for a Conference Series
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller of the scheduled conference.
Step by Step
1) Click on the Conference symbol.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click Edit.
6) Clear the Recurring Conference check box and select it again.
108
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
7) Click Exceptions.
8) Click Add.
9) Select the relevant conference appointment in the Original Date/Time dropdown list.
10) Click on Remove this recurrence.
11) Click OK.
12) Click Cancel.
13) Click OK.
14) Click Advanced.
15) If you want to add some introductory text to the invitation e-mail, click in the
Notes input field and enter the desired text.
16) Click Save.
Related Topics
4.4.3 Permanent Conference
A permanent conference is not subject to time restrictions. The conference
participants can dial in at any time.
The conference controller saves a permanent conference under a specified
name. The conference is retained until it is explicitly deleted.
Options for Configuring a Scheduled Conference
The initiator of the conference can define the following properties:
•
Authentication of conference participants on joining the conference required
(by entering a conference ID and password via the phone keypad).
INFO: Mobility Entry users must enter the code for DTMF suffix
dialing before their authentication.
The default password for conferences is 123456. The conference controller
can change this for the conference participants individually.
•
Language of the announcements and invitations by e-mail (by default, this is
the language of the voicemail box).
Starting the Conference
As soon as the first conference participant dials in, the system opens the window
with the virtual conference room automatically for all internal conference
participants, provided they have started myPortal for Desktop or
myPortal for Outlook. All conference participants dial in themselves. The system
announces every participant who joins the conference, as in: "... has joined
the conference."
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
109
Unified Communications
Conferencing (not with OpenScape Office HX)
Dialing In
Every conference participant can use the dial-in number to dial into the
conference at any time.
Recording the Conference
Conference controllers can record a conference automatically or manually for
themselves or for all connected internal conference participants, provided the live
recording of calls has been activated in the system. Participants located in the
own node receive the recording in the voicemail box; participants in other nodes,
via e-mail. The duration of the recording is only limited by the available storage
capacity of the system.
Related Topics
Related Topics
• How to Add Conference Participants
•
How to Remove Conference Participants
•
How to Specify another Conference Controller
•
How to Determine the Dial-in Number for a Scheduled, Permanent or Open
Conference
•
How to Determine the Conference ID for a Scheduled or Permanent
Conference
•
How to Change the Password for a Scheduled or Permanent Conference
•
How To Display a Scheduled, Permanent or Open Conference as the
Conference Controller
4.4.3.1 How to Configure a Permanent Conference
Prerequisites
•
You are working with the classic user interface.
•
Your administrator has configured a dial-in number for conferences.
Step by Step
1) Click Conference.
2) Click AdHoc Conference. The AdHoc Conference window opens with you
set as the conference controller.
3) Add any conference participants as needed; see How to Add Conference
Participants for details.
4) In the AdHoc Conference window, click on File > Save.
5) Enter the Conference Name.
6) Click Advanced.
7) Select one of the following options in the Conference Type drop-down list:
110
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
•
If you want to mandate the authentication of conference participants using
passwords, select Permanent Conference.
•
If you want to waive the authentication requirement for the conference
participants using passwords, select Permanent Conference (No
Password).
8) Select the desired Conference Language for the announcements and the
invitations by e-mail (by default, this is the language the voicemail box).
9) Enable the check box This conference is active.
10) If you want to force the conference participants to authenticate by pressing
the * (star) key, select the check box Force called participant to enter "*"
(star) to join the conference.
INFO: This option is recommended if the conference participants
do not have to authenticate via a password. This ensures that only
the participants who are actually present are connected to the
conference, as opposed to a voicemail box, for example.
11) If you want to use Web Collaboration concurrently with this conference, select
the Automatically start phone conference with web collaboration check
box.
12) If you want the system to automatically record the conference, select the
Automatically record this conference check box.
13) If you want the e-mail invitations to be sent automatically to the conference
participants, select the check box Automatically send email invitation to
conference participants.
14) If you want to add some introductory text to the invitation e-mail, enter this in
the Notes.
15) Click Save.
16) Click Send to all. The invitation e-mails will now be sent.
Related Topics
Related Topics
• Call Number Formats
•
How to Add Conference Participants
•
How to Delete a Permanent Conference
4.4.3.2 How to Display your Own Permanent or Open Conference
Prerequisites
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
You are working with the classic user interface.
111
Unified Communications
Conferencing (not with OpenScape Office HX)
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Select one of the following options:
•
If you want to display the virtual conference room, click View.
•
If you want to view the general settings of the conference, click on Edit.
Related Topics
Related Topics
• How To Display a Scheduled, Permanent or Open Conference as the
Conference Controller
4.4.3.3 How to Delete a Permanent Conference
Prerequisites
•
You are working with the classic user interface.
•
You are the conference controller.
Step by Step
1) Click Conference.
2) Click Manage my conferences.
3) Click on the My Conferences tab.
4) Click on the relevant conference under Conference Name.
5) Click on Remove, followed by Close.
Related Topics
Related Topics
• How to Configure a Permanent Conference
4.4.4 Open Conference
Open conferences are intended for a fixed number of arbitrary participants. Any
participant who has the requisite access data can dial into them.
The conference controller saves a permanent conference under a specified
name. The conference is retained until it is explicitly deleted.
112
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
Options for Configuring an Open Conference
The initiator of the conference can define the following properties:
•
The number of conference participants (max. 16).
•
Authentication of conference participants on joining the conference required
(by entering a conference ID and password via the phone keypad).
INFO: Mobility Entry users must enter the code for DTMF suffix
dialing before their authentication.
The default password for conferences is 123456. The conference controller
can change this for the conference participants individually.
•
The common conference ID for all conference participants.
•
Language of the announcements and invitations by e-mail (by default, this is
the language of the voicemail box).
Starting the Conference
All conference participants dial in themselves. The system announces every
internal participant who joins the conference, as in: "... has joined the
conference."
Dialing In
Every conference participant can use the dial-in number to dial into the
conference at any time.
Recording the Conference
Conference controllers can record a conference automatically or manually for
themselves or for all connected internal conference participants, provided the live
recording of calls has been activated in the system. Participants located in the
own node receive the recording in the voicemail box; participants in other nodes,
via e-mail. The duration of the recording is only limited by the available storage
capacity of the system.
Related Topics
4.4.4.1 How to Configure an Open Conference
Prerequisites
•
You are working with the classic user interface.
•
Your administrator has configured a dial-in number for conferences.
Step by Step
1) Click Conference.
2) Click AdHoc Conference. The AdHoc Conference window opens with you
set as the conference controller.
3) In the AdHoc Conference window, click on File > Save.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
113
Unified Communications
Conferencing (not with OpenScape Office HX)
4) Enter the Conference Name.
5) Enter a Start Date.
6) Enter a Start Time.
7) Enter the End Time.
8) If the conference is to occur repeatedly, click on Recurring Conference.
a) Select an End Date for the conference series.
b) Click on either Daily Recurrence, Weekly Recurrence or Monthly
Recurrence and then select the additional options desired for it in the
details.
9) If you want to delete a conference appointment time for a conference series,
perform the following steps:
a) Click Exceptions.
b) Click Add.
c) Select the relevant date in the drop-down list.
d) Click on Remove this recurrence.
e) Click OK.
f)
Click Cancel.
10) If you want to reschedule a conference appointment for a conference series,
perform the following steps:
a) Click Exceptions.
b) Click Add.
c) Select the relevant date in the drop-down list.
d) Click on Reschedule this recurrence.
e) Select a New scheduled date.
f)
Select a new Start Time.
g) Click OK.
h) Click Cancel.
11) Click OK.
12) Click Advanced.
13) Select the item Open Conference in the Conference Type drop-down list.
14) Select the desired Conference Language for the announcements and the
invitations by e-mail (by default, this is the language the voicemail box).
15) Enable the check box This conference is active.
114
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Conferencing (not with OpenScape Office HX)
16) If you want to force the conference participants to authenticate by pressing
the * (star) key, select the check box Force called participant to enter "*"
(star) to join the conference.
INFO: This option is recommended if the conference participants
do not have to authenticate via a password. This ensures that only
the participants who are actually present are connected to the
conference, as opposed to a voicemail box, for example.
17) If you want the system to automatically record the conference, select the
Automatically record this conference check box.
18) If you want to define the conference ID yourself, proceed in the following
steps:
a) Select the Create your own conference ID check box.
b) Enter the desired Conference ID (4-8 characters) in the input field.
19) Select the maximum number of conference participants under Number of
Channels
20) Click Save.
Related Topics
4.4.5 Web Collaboration Integration
Together with myPortal for Desktop (Windows) and myPortal for Outlook, the
system also supports the convenient integration of the separate product
OpenScape Web Collaboration for simultaneous multi-media collaboration during
phone calls as well as phone-controlled and application-controlled (LX/MX)
teleconferences. This gives you quick access to functions such as desktop and
application sharing, file sharing, co-browsing, whiteboarding, URL Push, IM chat
and video chat with multiple participants.
Supported Types of Connections
The Web Collaboration integration supports phone calls as well as the following
types of application-controlled phone conferences of the system:
•
Ad-hoc conference (LX/MX)
•
Scheduled conference (LX/MX)
•
Permanent conference (LX/MX)
On initiating or configuring a telephone conference, the conference controller can
start one Web Collaboration session for simultaneous use with the same
participants. On rescheduling, deleting or ending a conference call, the related
Web Collaboration session is also rescheduled or deleted automatically.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
115
Unified Communications
Voice and Fax Messages
FastViewer
Web Collaboration includes FastViewer as a client. No local installation of
FastViewer is required. More information can be found in the Web Collaboration
product documentation.
INFO: In order to enable clients to start FastViewer automatically,
proxy authentication must be disabled on the FastViewer server.
Connecting to the Web Collaboration Session (LX / MX)
Internal conference participants with UC PC clients are automatically connected
to the appropriate Web Collaboration session on starting the conference. To do
this, FastViewer is automatically downloaded and opened in the background,
which may take several seconds. External conference participants with known email addresses receive an e-mail with an appropriate link to the Web
Collaboration session.
INFO: Users of a Mac OS must copy the link for the Web
Collaboration session into the web browser.
For a scheduled conference, it is possible to connect to the Web Collaboration
session as early as 5 minutes before the start of the scheduled conference.
Conference ID and Password (LX/MX)
The conference ID and password for a Web Collaboration session are identical to
the conference ID and password of the associated phone conference.
Instant Messaging and Web Collaboration
Note that Instant Messaging of the system and Instant Messaging of a
Web Collaboration session are mutually independent, i.e.: the instant messages
from a UC client do not appear in a Web Collaboration session of the same
participant, and vice versa.
Related Topics
Related Topics
• How to Start Web Collaboration During a Call
•
Conferencing (not with OpenScape Office HX)
4.5 Voice and Fax Messages
The Voicemail and Fax services integrated in the system (not for
OpenScape Office HX) enable subscribers to receive and manage voicemails
and fax messages via myPortal for Desktop and myPortal for Outlook. Fax
messages can be sent by subscribers using Fax Printer.
Related Topics
116
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
4.5.1 Voicemail Box
The voicemail box records voicemail messages and recorded calls centrally. You
can access these messages using myPortal for Desktop.
You can view or edit the settings of your voicemail box; for example, you can
select the language of the voicemail box, determine its call number, switch
between recording and announcement modes, control the announcement of your
Presence status, record your announcements and import announcements. On
importing announcements, The system performs the automatic level control and
normalization needed to meet the "USA / TIA 968 Signal Power Limitations"
requirements.
INFO: In order to enable callers to reach your voicemail box on
Busy and No Answer, the administrator must set up call
forwarding to your voicemail box. Alternatively, you can also do
this yourself by setting up a "call diversion after time" on your
phone.
Determining the Call Number of the Voicemail Box
You can determine under which extension you can reach the voicemail box from
any phone to listen to your voicemails or change your Presence status, for
example.
Selecting the Recording or Announcement Mode
In Recording mode, callers can leave a message for you on reaching your
voicemail box exactly as with an answering machine, whereas in Announcement
mode, they will only hear your announcement. You can specify this setting
separately for every Presence status.
Announcements
You can record or import the following types of announcements:
•
Name announcement:
Your name announcement is used at the start of conferences for which you
have invited others and to announce when you join a conference. In addition,
the name announcement you have recorded is used as a greeting when you
have enabled the announcement of your Presence status for the caller
involved and your Presence status is not Office, CallMe or Do Not Disturb.
•
General personal greeting
This announcement is heard by callers in default mode (i.e., when no custom
profiles of the personal AutoAttendant are enabled) on reaching your
voicemail box. For example: "I am unfortunately unable to take your call at this
moment …"
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
117
Unified Communications
Voice and Fax Messages
•
Personal greeting for Busy:
This announcement is heard by callers in default mode (i.e., when no custom
profiles of the personal AutoAttendant are enabled) on reaching your
voicemail box when your line is busy. For example: "I am currently on the
phone and unable to take your call …" If no personal greeting for Busy has
been recorded, callers will hear your general personal greeting.
•
Personal greeting for No Answer:
This announcement is heard by callers in default mode (i.e., when no custom
profiles of the personal AutoAttendant are enabled) when their calls are
forwarded to your voicemail box manually or on no answer after a specific
amount of time. For example: "I am unfortunately unable to take your call at
this moment …" If you have not recorded any personal greeting for No
Answer, callers will hear your general personal greeting.
•
Personal announcements for custom profiles of the personal AutoAttendant:
These announcements are not used by the voicemail box in default mode, but
only in conjunction with the personal AutoAttendant.
The voicemail box can generate situation-based announcements of your
Presence status (except for Office, CallMe and Do Not Disturb) with an
indication of your scheduled time of return; for example: "xxx is in a
meeting until two thirty p.m. today". You can enable or disable the
announcement of your Presence status for specific callers and for all external
callers separately.
In default mode, the voicemail box plays back announcements in the following
order (from left to right):
Profile
Busy
Name announcement
Announcement of
your Presence Status
-
-
Personal greeting
for Busy
(if not recorded:
general)
No answer
-
-
for No Answer
(if not recorded:
general)
Meeting
Sick
Break
x (if you have enabled
the announcement of
your Presence status
for the caller involved)
x (if you have enabled
the announcement of
your Presence status
for the caller involved)
general
-
-
general
Gone Out
Vacation
Lunch
Gone Home
Do Not
Disturb
118
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Example: Announcement of your Presence status is enabled for the caller
Profile
Meeting
Name announcement
Announcement of
your Presence Status
"Natalie Dubios"
"is in a meeting
until two thirty
p.m. today".
Personal greeting
"I am unfortunately
unable to take your call
at the moment …"
Example: Announcement of your Presence status is disabled for the caller
Profile
Gone Out
Name announcement
Announcement of
your Presence Status
-
-
Personal greeting
"I am unfortunately
unable to take your call
at the moment …"
Central AutoAttendant
The central AutoAttendant enables the administrator of your communication
system to offer callers time-based choices to forward their calls to numbers he or
she has defined or to your voicemail box. As with the personal AutoAttendant,
callers signal their choices by entering digits at the phone. Due to the central
AutoAttendant, further announcements may follow those described above.
Announcement of your Presence Status
You can define whether callers should hear the announcement of your Presence
status on reaching your voicemail box. You can enable or disable this collectively
for all external callers and for specific subscribers.
Retrieving your Voicemail through the Attendant
Using myAttendant, you can grant or deny the Attendant permission to access
your voicemails and Fax messages. In the latter case, the Attendant can only
determine how many messages you have.
Bypassing the Password Prompt
If you call the voicemail box from one of your additional phone numbers, you can
bypass the password prompt. This setting also applies to the phone notification
service of the voicemail box.
Language of the Voicemail Box
You can define in which language the voicemail box plays back the menu choices
and the internal system announcements.
Related Topics
Related Topics
• First Steps
•
Screen Pops
•
How to Enable or Disable Screen Pops for New Voicemails
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
119
Unified Communications
Voice and Fax Messages
•
How to Redirect a Call to your Voicemail Box
•
Personal AutoAttendant
•
How to Record your Name Announcement
•
How to Record your Personal Greeting
•
How to Enable or Disable Screen Pops for New Voicemails
•
Managing Voicemail
•
Notification Service for Messages
•
How to Define an Additional Phone Number
4.5.1.1 How to Determine the Call Number for your Voicemail Box
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) You will find the call number of the voicemail box in the Voicemail call
number field.
4) Click on Close, followed by OK.
Related Topics
Related Topics
• How to Call a Voicemail Box from an Internal Phone
•
How to Call a Voicemail Box from an External Phone
4.5.1.2 How to Select Recording or Announcement Mode
Step by Step
1) Click Setup.
2) Click on Communications > VoiceMail Settings.
3) Select one of the following values for each Presence status in the Recording
area:
•
If you want callers to be able to leave messages in your voicemail box,
select Active.
•
If you want callers to only hear the announcements of your voicemail box,
select Inactive.
4) Click Save.
Related Topics
120
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
4.5.1.3 How to Record an Announcement
Step by Step
1) Click Setup.
2) Click Profiles and then on any profile.
3) Click Record.
4) Click on the announcement with the desired designation in the list of
announcements.
5) Click Record. The voicemail box will now call you on your phone.
6) Accept the call from the voicemail box.
7) Speak out the text of your announcement after the tone.
8) Click Stop.
9) If you want to listen to the announcement on the phone, click on Play. To exit
the playback loop, click on Stop.
10) If you want to record the announcement again, click on Record again.
11) Click Save.
Related Topics
Related Topics
• Personal AutoAttendant
•
How to Edit a Profile for the Personal AutoAttendant
•
How to Import an Announcement
•
How to Delete an Announcement
4.5.1.4 How to Import an Announcement
Prerequisites
•
The audio file is available as a PCM file with the following properties: 8 kHz,
16 bit, mono.
Step by Step
1) Click Setup.
2) Click Profiles and then on any profile.
3) Click Record.
4) Click Upload.
5) Select the desired file and click Open.
6) Click on OK in the Warning!!! window.
7) Click OK.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
121
Unified Communications
Voice and Fax Messages
8) Click on Close, followed by Save.
INFO: On importing announcements, the system performs the
automatic level control and normalization needed to meet the
"USA / TIA 968 Signal Power Limitations" requirements.
Related Topics
Related Topics
• Personal AutoAttendant
•
How to Edit a Profile for the Personal AutoAttendant
•
How to Record an Announcement
•
How to Delete an Announcement
4.5.1.5 How to Delete an Announcement
Step by Step
1) Click Setup.
2) Click Profiles and then on any profile.
3) Click Record.
4) Click on the announcement with the desired designation in the list of
announcements.
5) Click Remove.
6) Click on Close, followed by Save.
Related Topics
Related Topics
• How to Record an Announcement
•
How to Import an Announcement
4.5.1.6 How to Enable or Disable the Announcement of your Presence Status for
External Callers
Step by Step
1) Click Setup.
2) Click on Sensitivity > VoiceMail Presence.
3) Select one of the following options:
•
122
If you want to activate the voicemail box announcement of your Presence
status for external callers, enable the check box My presence will be
played to external callers when they reach my VoiceMail.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
•
If you want to deactivate the voicemail box announcement of your
Presence status for external callers, clear the check box My presence
will be played to external callers when they reach my VoiceMail.
4) Click Save.
Related Topics
Related Topics
• Presence Status
•
How to Change the Visibility of your Presence Status for Others
•
Personal AutoAttendant
•
How to Enable or Disable the Announcement of your Presence Status for
Specific Callers
4.5.1.7 How to Enable or Disable the Announcement of your Presence Status for
Specific Callers
Prerequisites
•
In order to disable the announcement of your Presence status for a specific
number, this number must be transmitted with the call.
Step by Step
1) Click Settings.
2) Click on Sensitivity > VoiceMail Presence.
3) Select one of the following options:
•
If you want to suppress the voicemail box announcement of your
Presence status for a specific number, click Add, enter the desired
number in the input field, and click OK.
INFO: You can use the following character as placeholders to
define a call number range: ? for any single digit and * for any
number of digits.
•
If you want to allow the voicemail box announcement of your Presence
status for a specific number, click on desired entry and then on Remove.
4) Click Save.
Related Topics
Related Topics
• Presence Status
•
How to Change the Visibility of your Presence Status for Others
•
Personal AutoAttendant
•
How to Enable or Disable the Announcement of your Presence Status for
External Callers
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
123
Unified Communications
Voice and Fax Messages
4.5.1.8 How to Grant or Deny the Attendant Permission to Retrieve Voicemail and Fax
Messages
Step by Step
1) Click Setup.
2) Click on Sensitivity > Security and Access.
3) Select one of the following options:
•
If you want to allow your voicemail and fax messages to be retrieved by
the Attendant, enable the check box Receptionists are able to listen to
my voicemail and to read my fax messages.
•
If you want to prevent your voicemail and fax messages from being
retrieved by the Attendant, clear the check box Receptionists are able
to listen to my voicemail and to read my fax messages.
4) Click Save.
Related Topics
Related Topics
• Fax Box
4.5.1.9 How to Activate or Deactivate the Password Prompt for the Voicemail Box
NOTICE: If you deactivate the password prompt for your
voicemail box, unauthorized users could access your voicemailby
phone and listen to your voice messages, for example, or call
external destinations at your cost.
Step by Step
1) Click Setup.
2) Click on Security and Access > Security and Access.
3) Select one of the following options:
•
If you want to activate the password prompt on calling your voicemail box,
clear the Bypass password when calling voicemail check box.
•
If you want to deactivate the password prompt on calling your voicemail
box, enable the Bypass password when calling voicemail check box.
4) Click Save.
Related Topics
124
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
4.5.1.10 How to Select the Language of the Voicemail Box
Step by Step
1) Click Setup.
2) Click on Communications > VoiceMail Settings.
3) Select the VoiceMail Language in the drop-down list.
4) Click Save.
Related Topics
4.5.2 Managing Voicemail
You can listen to and forward voicemails, for example, or move them to another
folder, save them as WAV files or call the sender.
Folders for Voicemail
myPortal for Desktop organizes voice messages in the following folders:
•
Inbox
•
Played
•
Saved
•
Deleted
Displaying Voicemail Messages
The following symbols identify different types of voicemail:
Symbol
-
Type of voicemail
Voicemail to a subscriber
Voicemail to a group
Recorded call
Recorded conference
The List view of voicemails shows the following details:
•
Symbol for the type of voicemail
•
Date
•
Time
•
Group, if available
•
Call number, if available
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
125
Unified Communications
Voice and Fax Messages
•
Last Name, if available
For recorded conferences: conference name, if available; otherwise, Last
Name of the second conference participant, if available
•
First Name, if available
•
Company, if available
•
Priority
Color coding: urgent (rot), private (blue), normal (black). When listening to the
voicemail Inbox, an announcement notifies you of the number of messages
per priority.
•
Duration
Retention Period for Voicemail
The communication system automatically deletes voicemails after a defined
retention period (which can be configured by the administrator) expires.
Voicemail for Groups
The administrator can set up groups for voice messages with a separate call
number for each group. The communication system forwards voice messages to
a group to each group member. As soon as one of the subscribers has listened
to a new message, that message is flagged as "played" for all group members. If
a group member deletes a message, that entry is also deleted for all other group
members.
Listening to Voicemail
You can optionally listen to voice messages on the phone or your PC. When a
new voice message is listened to for the first time, the communication system
moves it automatically from the Inbox folder to the Played folder.
Calling the Sender of a Voicemail
You can call the sender of a voice message.
Forwarding a Voice Message
You can forward a voice message easily to other internal subscribers.
Moving a Voice Message
You can move a voice message to another folder.
Saving a Voice Message as a File
NOTICE: The communication system saves voice messages for
a limited period of time, which can be configured per folder by the
administrator. When this time period expires, the voice messages
are automatically deleted by the communication system.
You can save a voice messages as a WAV file in the file system of your PC to
archive it permanently or send it to any recipient by e-mail.
126
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Related Topics
Related Topics
• User Interface Elements
•
Voicemail Box
4.5.2.1 How to Listen to a Voice Message on the Phone
Prerequisites
•
Your Presence status is Office or CallMe.
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Inbox.
3) Click on the desired voicemail.
4) Select one of the following options:
•
Classic user interface:
Click on Play Message > Through Phone in the context menu.
•
Modern user interface:
Click on the Play through phone symbol.
Next steps
Accept the call from the voicemail box.
Related Topics
Related Topics
• How to Listen to a Voice Message on the PC
4.5.2.2 How to Listen to a Voice Message on the PC
Prerequisites
•
Your PC has a properly configured sound card with speakers or headphones.
INFO: If you use iTunes on the Mac OS to play back your
multimedia files, the voice messages listened to are automatically
copied to the iTunes library. In some circumstances, these
messages may then be automatically transmitted to the iCloud as
well as other devices through synchronization and hence should
be deleted manually.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
127
Unified Communications
Voice and Fax Messages
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Inbox.
3) Click on the desired voicemail.
4) Select one of the following options:
•
Classic user interface:
Click on Play Message > Through Speakers in the context menu.
•
Modern user interface:
Click on the Play through speakers symbol.
5) In the screen pop, click on the Play symbol.
Related Topics
Related Topics
• How to Listen to a Voice Message on the Phone
4.5.2.3 How to Call the Sender of a Voice Message
Prerequisites
•
The caller's phone number has been transmitted.
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Played.
3) Click on the desired voicemail.
4) Select one of the following options:
•
Classic user interface:
In the context menu, click Dial, and if the context menu offers several
phone numbers for selection, click on the desired number.
•
Modern user interface:
Click on the Call Sender icon, and if several phone numbers are offered
for selection, click on the desired number.
Related Topics
4.5.2.4 How to Forward a Voicemail Message
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Played.
3) Click on the desired voicemail.
128
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
4) Click on Forward Message, in the context menu.
5) To sort the list of recipients, click on the column headers Extension or Name
to sort by that criterion in alphanumeric ascending order.
6) If you want to reverse the sort order of the list of recipients, click again on the
column header.
7) Activate the check box for the desired recipient or recipients.
8) If you want to add a comment, proceed in the following steps:
a) Click on Comment.
b) Click Start. The voicemail box will now call you on your phone.
c) Accept the call from the voicemail box.
d) Speak out the text of your comment after the tone.
e) Click Stop.
f)
If you want to listen to the comment on the phone, click on Listen. To exit
the playback loop, click on Stop.
g) If you want to record the comment again, click on Record again.
9) Click Forward.
Related Topics
4.5.2.5 How to Move a Voice Message
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Played.
3) Click on the desired voicemail.
4) Select the desired folder in the context menu under Move Message to > ….
Related Topics
4.5.2.6 How to Save a Voice Message as a WAV File
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Played.
3) Click on the desired voicemail.
4) Click on Save as WAV in the context menu.
5) Select a folder in the Save window, enter a file name of your choice in the
input field, and click Save.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
129
Unified Communications
Voice and Fax Messages
Related Topics
4.5.2.7 How to Sort Voice Messages
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on the desired folder, e.g., Played.
3) Click on one of the column titles: Type, Date, Time, Group Name, Call no,
Last Name, First Name, Company Name, Priority or Duration to sort the
voicemails by this criterion in ascending alphanumeric order.
4) If you want to reverse the sort order, click again on column header.
Related Topics
4.5.2.8 How to Delete a Voicemail
Step by Step
1) Click on the Voicemail tab or in the corresponding window.
2) Click on one of the folders: Inbox, Played or Saved.
3) Select one of the following options:
•
Click on the desired voicemail.
•
Mark the desired voicemails (Classic User Interface).
4) Select Move Message to > Move to Deleted in the context menu.
5) If you want to delete the Fax messages permanently:
a) Click on the Deleted folder.
b) Select the desired voice message(s).
c) Select Move Message to > Permanently Delete Message in the context
menu.
Related Topics
4.5.3 Fax Box
The Fax box saves Fax messages centrally. You can access these messages
using myPortal for Desktop.
You can view or edit the following settings of your Fax box:
Determining your own Fax Number
You can determine under which fax number you can be reached.
130
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Retrieving Fax Messages through the Attendant
Using myAttendant, you can grant or deny the Attendant permission to access
your fax messages and voicemails. In the latter case, the Attendant can only
determine how many messages you have.
Related Topics
Related Topics
• Screen Pops
•
How to Enable or Disable Screen Pops for New Fax Messages
•
How to Enable or Disable Screen Pops for New Voicemails
•
Managing Fax Messages
•
How to Grant or Deny the Attendant Permission to Retrieve Voicemail and
Fax Messages
•
Sending Fax Messages
•
Notification Service for Messages
4.5.3.1 How to Determine your own Fax Number
Prerequisites
•
Your administrator has configured a Fax number for you.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) You will find your fax number in the Fax Number field.
4) Click on Close, followed by OK.
Related Topics
4.5.4 Managing Fax Messages
You can display or forward fax messages, for example, or move them to another
folder, save them as TIFF files and even call the sender.
Folder for Fax Messages
myPortal for Desktop organizes fax messages in the following folders:
•
Inbox
•
Read
•
Deleted
•
Sent Items:
Contains the fax messages already sent by the communication system
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
131
Unified Communications
Voice and Fax Messages
•
Sending Items
Contains queued fax messages that have not yet been sent The
communication system tries to transmit a fax message up to 5 times within 25
minutes. The Progress of each fax message being sent is indicated by a
progress bar.
Details of Fax Messages
Depending on the folder involved, the List view of the fax messages shows
different combinations of the following details: Date, Time, Call number, Last
Name, First Name, Company, Fax Group, Pages, Status, Destination and
Progress.
Retention Period for Fax Messages
The communication system automatically deletes fax messages for which the
following retention periods are exceeded:
Fax message
Retention period (days)
New
120
Read
365
Sent
365
Deleted
60
Fax Messages for Groups
The administrator can set up groups for fax messages with a separate Fax
number for each group. The communication system forwards fax messages to a
group to each group member. As soon as one of the subscribers has viewed a
new message, the message is flagged as "read" for all group members. If a group
member deletes a message, that entry is also deleted for all other group
members.
Calling the Sender of a Fax Message
You can call the sender of a fax message.
Forwarding a Fax Message
You can forward a fax message to other internal subscribers.
Saving a Fax Message as a File
You can save a fax message as a TIFF file in the file system of your PC to archive
it permanently or send it by e-mail to any recipient.
Displaying Fax Messages
When a new fax message is viewed for the first time, the communication system
moves it automatically from the Inbox folder to the Read folder.
Fax Transmission Report
You can display the transmission report of a fax message in the web browser.
132
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Related Topics
Related Topics
• User Interface Elements
•
Fax Box
4.5.4.1 How to Display a Fax Message
Prerequisites
•
TIFF files are associated with an application in which they can be viewed.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Inbox.
3) Click on the relevant fax message.
4) Select one of the following options:
•
Classic user interface:
Select View Fax in the context menu.
•
Modern user interface:
Click the View Fax icon.
Related Topics
4.5.4.2 How to Call the Sender of a Fax Message
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Read.
3) Click on the desired fax message.
4) Select one of the following options:
•
Classic user interface:
In the context menu, click Dial, and if the context menu offers several
phone numbers for selection, click on the desired number.
•
Modern user interface:
Click on the Call Sender icon, and if several phone numbers are offered
for selection, click on the desired number.
Related Topics
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
133
Unified Communications
Voice and Fax Messages
4.5.4.3 How to Forward a Fax Message
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Read.
3) Select one of the following options:
•
Classic user interface:
Click on Forward Message in the context menu.
•
Modern user interface:
Click on the Forward Message symbol.
4) Enter the fax number of the recipient in dialable or canonical format in the
Forward Message window.
5) Click on + to add this recipient to the fax message.
6) If you want to send the fax to further recipients, click in the input field and
repeat steps 4 through 5 accordingly.
INFO: You can also add further recipients by searching in a
directory.
7) If you want to remove a recipient, proceed in the following steps:
a) Click in the list of Recipients on the desired entry.
b) Press the Del key.
8) Click OK.
Related Topics
4.5.4.4 How to Move a Fax Message
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Read.
3) Click on the desired fax message.
4) Select the desired folder in the context menu under Move Message to > ….
Related Topics
4.5.4.5 How to Save a Fax Message as a TIFF File
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Read.
134
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
3) Click on the desired fax message.
4) Select one of the following options:
•
Classic user interface:
Click on Save as tiff in the context menu.
•
Modern user interface:
Click the Save as tiff icon.
5) Select a folder in the Save window, enter a file name of your choice in the
input field, and click Save.
Related Topics
4.5.4.6 How to Sort Fax Messages
Prerequisites
•
You are working with the classic user interface.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the desired folder, e.g., Read.
3) Click on one of the column titles: Date, Time, Call no, Last Name, First
Name, Company Name, Fax Group or Pages to sort the Fax messages by
this criterion in ascending alphanumeric order.
4) If you want to reverse the sort order, click again on column header.
Related Topics
4.5.4.7 How to Display an Overview of Fax Messages in the Send Queue
Prerequisites
•
You have sent fax messages with Fax Printer.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the Sending Items folder.
3) If you are working with the classic user interface, click on one of the column
titles: Date, Fax Group, Last Name, First Name, Company, Destination or
Pages to sort the fax messages by this criterion in ascending alphanumeric
order. If you want to reverse the sort order, click again on column header.
Related Topics
Related Topics
• How to Display an Overview of Sent Fax Messages
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
How to Cancel Sending a Fax Message
135
Unified Communications
Voice and Fax Messages
4.5.4.8 How to Cancel Sending a Fax Message
Prerequisites
•
You are working with the classic user interface.
•
You have sent a fax message with Fax Printer.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the Sending Items folder.
3) Select Remove in the context menu of the appropriate Fax message.
4) Click OK.
Related Topics
Related Topics
• How to Display an Overview of Fax Messages in the Send Queue
4.5.4.9 How to Display an Overview of Sent Fax Messages
Prerequisites
•
You have sent fax messages with Fax Printer.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the Sent Items folder.
3) If you are working with the classic user interface, click on one of the column
titles: Date, Fax Group, Pages, Status, Last Name, First Name, Company
or Destination to sort the fax messages by this criterion in ascending
alphanumeric order. If you want to reverse the sort order, click again on
column header.
Related Topics
Related Topics
• How to Display an Overview of Fax Messages in the Send Queue
4.5.4.10 How to Resend a Fax Message
Prerequisites
•
136
You are working with the classic user interface.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the Sent Items folder.
3) Click on the relevant fax message.
4) Click on Resend in the context menu.
Related Topics
4.5.4.11 How to Display a Fax Transmission Report
Prerequisites
•
You have sent a fax message with Fax Printer.
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on the Sent Items folder.
3) Click on the relevant fax message.
4) Select one of the following options:
•
Classic user interface:
Click Properties in the context menu and then on Fax Transmission
Report.
•
Modern user interface:
Click on the Fax Transmission Report symbol.
The transmission report of the relevant fax message is displayed in the web
browser.
Related Topics
4.5.4.12 How to Delete a Fax Message
Step by Step
1) Click on the Fax Messages tab or in the corresponding window.
2) Click on one of the folders: Inbox, Read, Sent Items or Sending Items.
3) Select one of the following options:
•
Click on the desired fax message.
•
Mark the desired Fax messages.
4) Select one of the following options:
•
Classic user interface:
Select Move Message to > Move to Deleted in the context menu.
•
Modern user interface:
Click on the Delete symbol.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
137
Unified Communications
Voice and Fax Messages
5) If you want to delete the Fax messages permanently:
a) Click on the Deleted folder.
b) Select the desired Fax message(s).
c) Select Move Message to > Permanently Delete Message in the context
menu.
Related Topics
4.5.5 Sending Fax Messages
You can use Fax Printer to send fax messages under Windows.
Details on sending fax messages can be found in OpenScape Office, Fax Printer,
User Guide.
Related Topics
Related Topics
• Fax Box
4.5.6 Notification Service for Messages
The communication system can optionally notify you about new voice and fax
messages by e-mail, by phone or with an SMS.
The Notification Service works as follows:
138
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Notification
for voicemail
for fax message
E-mail
You receive an e-mail with the
message as a WAV file, the date
and time it was received, the
duration of the message and, if
available, the phone number and
name of the sender. If the size of the
WAV file exceeds a defined value, it
is not attached to the e-mail. This
value can be changed by the
administrator of the communication
system; the default is 10 MB.
Voicemails with "urgent" priority are
flagged as e-mails with "High"
importance. E-mails with a
voicemail have a separate symbol in
Outlook. If you are using an IMAP
mailbox that shows only the e-mail
headers, the usual e-mail icon will
appear instead.
You receive an e-mail with the
message as a TIFF file, the date
and time it was received, the
number of pages and, if available,
the phone number and name of the
sender. If the size of the TIFF file
exceeds a defined value, it is not
attached to the e-mail. This value
can be changed by the
administrator of the communication
system; the default is 10 MB. Emails with a Fax message have a
separate symbol in Outlook. If you
are using an IMAP mailbox that
shows only the e-mail headers, the
usual e-mail icon will appear
instead.
SMS
You receive an SMS about the received message at the phone number
defined by you.
by phone
Your voicemail box calls you at the
number you have specified and
plays back the message to you.
-
You can enable or disable every type of notification for each Presence status
individually.
The notification by phone can be restricted to the business hours configured by
your administrator. You can define the number and intervals for the repeated
attempts for the notification by phone.
Related Topics
Related Topics
• Voicemail Box
•
Fax Box
4.5.6.1 How to Enable or Disable E-mail Notifications
Prerequisites
•
The administrator of your communication system has configured the sending
of e-mails.
•
Your e-mail address is specified under Personal Details.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
139
Unified Communications
Voice and Fax Messages
Step by Step
1) Click Setup.
2) Select one of the following options:
•
If you want to enable or disable the notification for voice messages, click
on Communication > VM Notification.
•
If you want to enable or disable the notification for fax messages, click on
Communication > Fax Notification.
3) Select one of the options below in the Email row for each column with one of
the following Presence statuses: Office, Meeting, Sick, Break, Out of the
Office, Vacation, Lunch, Home or Do Not Disturb:
•
If you want to activate the notification for a Presence status, enable the
corresponding check box.
•
If you want to deactivate the notification for a Presence status, clear the
corresponding check box.
4) Click Save.
Related Topics
Related Topics
• How to Specify an E-Mail Address
4.5.6.2 How to Enable or Disable the Notification by Phone
Step by Step
1) Click Setup.
2) Click on Communications > VM Notification.
3) Select one of the options below in the Outbound row for each column with
one of the following Presence statuses: Office, Meeting, Sick, Break, Out of
the Office, Vacation, Lunch, Home or Do Not Disturb:
•
If you want to activate the notification for a Presence status, enable the
corresponding check box.
•
If you want to deactivate the notification for a Presence status, clear the
corresponding check box.
4) Choose one the following options in the Outbound Notification Times area:
•
If you want to be notified only during business hours, click on During
Business Hours Only.
•
If you want to be notified at any time, click on 24 Hours a Day.
5) Enter the desired phone number in the Outbound Number field in dialable
format or in canonical format
6) Enter the desired time interval and the number of attempts to be made when
repeating the notification if required in the Attempts area.
140
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
7) Click Save.
Related Topics
Related Topics
• Call Number Formats
•
Phone Menu of the Voicemail Box
4.5.6.3 How to Enable or Disable SMS Notification
Prerequisites
•
The administrator of your communication system has defined an appropriate
SMS template for you.
Step by Step
1) Click Setup.
2) Select one of the following options:
•
If you want to enable or disable the notification for voice messages, click
on Communication > VM Notification.
•
If you want to enable or disable the notification for fax messages, click on
Communication > Fax Notification.
3) Select one of the options below in the SMS row of the Notification table for
each column with one of the following Presence statuses: Office, Meeting,
Sick, Break, SMS of the Office, Vacation, Lunch, Home or Do Not Disturb:
•
If you want to activate the notification for a Presence status, enable the
corresponding check box.
•
If you want to deactivate the notification for a Presence status, clear the
corresponding check box.
4) Click Save.
Related Topics
4.5.7 Phone Menu of the Voicemail Box
You can access your voicemail box, change your Presence status and also use
other functions from a phone.
The password for accessing your voicemail box is the same as for . Selections
are made in the phone menu by entering digits at the phone. You can also enter
a digit during an announcement to speed up operations.
Main Menu
The main menu is the first menu you hear on reaching the voicemail box.
Depending on your choices, you are then taken to further menus or functions.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
141
Unified Communications
Voice and Fax Messages
Digit
1
Function
Mailbox
1
2
New
1
Replay
2
Call back
3
Next message
4
Save
5
Save as new
6
Delete
7
Copy to other voicemail box
0
Date and Time
Played
(same functions as those under New)
3
Saved
(same functions as those under New)
4
Deleted
(same functions as those under New)
2
3
142
Change Status
1
Office
2
Meeting
3
Sick
4
Break
5
Gone out
6
Vacation
7
Lunch
8
Gone Home
Record announcements
1
Name
2
Default Greeting
3
Presence-based greetings
0
Busy
1
No Answer
2
Meeting
3
Sick
4
Break
5
Gone out
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Voice and Fax Messages
Digit
Function
4
6
Vacation
7
Lunch
8
Gone Home
CLI Recognition
4
Change Password
5
Leave message for extension
6
Connect to extension
9/0
Connect to Attendant Console
General functions
The following functions are available under different menu items:
Digit
Function
1
Confirm
2
Edit
*
Enter the station number
#
Up one level
Related Topics
Related Topics
• Presence Status
•
How to Record your Name Announcement
•
How to Record your Personal Greeting
•
How to Enable or Disable the Notification by Phone
•
How to Change the Password
4.5.7.1 How to Call a Voicemail Box from an Internal Phone
Step by Step
›
Dial the phone number of the voicemail box.
You will hear the phone menu of the voicemail box.
Related Topics
Related Topics
• How to Determine the Call Number for your Voicemail Box
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
How to Call a Voicemail Box from an External Phone
143
Unified Communications
Instant Messaging
4.5.7.2 How to Call a Voicemail Box from an External Phone
Prerequisites
•
You have recorded your name announcement and your personal greeting for
the voicemail box.
Step by Step
1) Dial the phone number of the voicemail box with the area code and phone
number of the communication system.
2) Enter your office number followed by #.
3) Enter your password.
You will hear the phone menu of the voicemail box.
Related Topics
Related Topics
• How to Record your Name Announcement
•
How to Record your Personal Greeting
•
How to Determine the Call Number for your Voicemail Box
•
How to Call a Voicemail Box from an Internal Phone
4.6 Instant Messaging
Instant Messaging refers to communicating with instant messages (usually called
a chat).
Related Topics
4.6.1 Instant Messaging
Instant Messaging enables you to chat with other peers. The communication
system also supports instant messaging with an external communication partner
via XMPP and multi-user chats, as well as both in combination.
Sent and received instant messages are presented to you and your
communication partners as a dialog.
Context menus with the menu item Send Instant Message indicate whether the
relevant subscriber is logged in by a symbol on the left.
144
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
Instant Messaging
Symbol
Status
Logged in
Logged out
If one of the communication partners is offline, the following occurs with the
instant message, depending on the type of the selected recipient:
Recipients
Behavior
Individual subscribers
The instant message is displayed at the
next login.
Group in Favorites
The instant message is never displayed for
the subscribers who are offline.
External Instant Messaging
You can also chat with one external XPP communication partner (e.g., a Google
Talk user).
Multi-user chat
A multi-user chat is the exchange of instant messages with multiple
communication partners. Here too, the communication system supports a
maximum of one external XMPP communication partner.
Instant Messaging and Web Collaboration
Note that Instant Messaging of the system and Instant Messaging of a
Web Collaboration session are mutually independent, i.e.: the instant messages
from a UC client do not appear in a Web Collaboration session of the same
participant, and vice versa.
Instant Message Window
The Instant Message window in myPortal for Desktop with the classic user
interface and in myPortal for Outlook consists of the following areas:
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
145
Unified Communications
Instant Messaging
•
User area (1)
This area shows every participating communication partner as a symbol or
with a picture, if available.
•
Message area (2)
This area shows the instant messages of all the chatting subscribers.
•
Input area (3)
This area contains the input field for the instant messages.
myPortal for Desktop with modern user interface shows instant messages in the
workspace of the main window.
Related Topics
Related Topics
• Screen Pops
4.6.1.1 How to Send an Instant Message
Prerequisites
146
•
You are working with the classic user interface.
•
Instant Messaging is enabled in the system.
•
Your XMPP alias is defined (if you want to chat with an external
communication partner).
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
AutoAttendant
Step by Step
1) Select the recipient by one of the following methods:
•
Click on a contact or a group in the Favorites list.
•
Click on the Directories tab or window, then on Internal Directory or
External Directory, and then on a contact.
INFO: A current communication partner can alternatively also be
contacted via an instant message from the screen pop of the call.
2) Select Send Instant Message in the context menu.
3) If you want to add further communication partners the chat (to create a multiuser chat), drag them from Favorites or Directories to the Instant Message
window.
4) If you want to remove a communication partner from the multi-user chat,
select Remove in the Instant Message window in the user area from the
context menu of the symbol or image representing the respective
communication partner.
5) Enter the text in the Instant Message window in the input area.
6) If you want to insert an emoticon into the text, select one of the following
options:
•
Click on the Smiley icon and then on the desired emoticon.
•
Enter the keyboard shortcut for the emoticon, e.g., :).
7) Click Send.
8) If you want to delete the previous history of the chat in the Message Center,
click on the Trash icon.
Related Topics
Related Topics
• Directories
•
Favorites list
•
How to Define an XMPP Alias
4.7 AutoAttendant
Depending on the presence status of the called party, the AutoAttendant offers
callers options to route voice calls to fixed numbers or their voicemail box. Callers
signal their choice by entering digits at the phone.
Related Topics
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
147
Unified Communications
AutoAttendant
4.7.1 Central AutoAttendant
The central AutoAttendant is the system AutoAttendant, which can be configured
by the administrator.
As an administrator, you can do the following for any station numbers:
•
Record or import announcements for the central AutoAttendant. On importing
announcements, the system performs the automatic level control and
normalization needed to meet the "USA / TIA 968 Signal Power Limitations"
requirements.
By default, announcements for the central AutoAttendant are available in all
languages. Consequently, if you change these announcements, please take
all languages into account.
•
Configure profiles for the central AutoAttendant
•
Configure the central AutoAttendant for specific times and on the basis of
rules by using schedules Schedules also make it possible to offer advanced
selection options such as dialing by name, for example.
Related Topics
4.7.2 Personal AutoAttendant
The personal AutoAttendant offers callers the option of forwarding their voice
calls to the phone numbers defined by you or to your voicemail box, depending
on your Presence status. Callers signal their choice by entering digits at the
phone.
Custom Profiles for the Personal AutoAttendant
For every Presence status there is a custom profile in which you can define the
choices for your callers. You can activate or deactivate each profile separately. By
default, no profile is active. When you deactivate a profile, the default behavior of
your voicemail applies to the Presence status involved.
Announcements
When this profile is activated, the voicemail box plays back the following
announcements:
148
•
Name announcement:
If you have enabled dynamic announcements, the name announcement you
recorded is used for the greeting, unless your Presence status is Office,
CallMe or Do Not Disturb.
•
Dynamic announcements:
If you have enabled dynamic announcements, the voicemail box generates
situation-based announcements for your Presence status (except for Office,
CallMe and Do Not Disturb) with an indication of the scheduled time of your
return, e.g., "... is in a meeting until two thirty p.m. today".
You can activate or deactivate the playback of dynamic announcements
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
AutoAttendant
individually for each profile. If the dynamic announcements for a profile have
been enabled, you can activate or deactivate the announcements for your
Presence status for certain callers and for all external callers separately.
•
Personal announcement for the profile:
Before you activate a profile, you must record a personal announcement for
this profile that indicates to your caller the appropriate digits and associated
choices, e.g.: To leave a message, press 1. To speak with my representative,
press 2. To forward this call to my mobile phone, press 3." When you disable
dynamic announcements for the profile, you may find it useful to start your
personal announcement by indicating your Presence status.
The voicemail box plays back announcements for a profile in the following order
(from left to right):
Profile
Name
announcement
Dynamic
greetings
Personal
announcement
for profile
Busy
-
-
x
No answer
-
-
x
Meeting
x (if dynamic
announcements
have been
enabled)
x (if dynamic
x
announcements
have been
enabled)
-
-
Sick
Break
Gone Out
Vacation
Lunch
Gone Home
Do Not Disturb
x
Example: dynamic announcements enabled
Profile
Meeting
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Name
announcement
Dynamic
greetings
"Natalie Dubois" "is in a
meeting
until two
thirty p.m.
today".
Personal
announcement
for profile
"To leave a
message, press
1. To speak with
my
representative,
press 2."
149
Unified Communications
AutoAttendant
Example: dynamic announcements disabled
Profile
Gone Out
Name
announcement
-
Dynamic
greetings
-
Personal
announcement
for profile
"I am currently
out of the office.
To leave a
message, press
1. To speak with
my
representative,
press 2. To
forward this call
to my mobile
phone, press 3."
Actions
When editing the profile, you can define the appropriate actions for the digits
indicated in the announcement.
•
Record
The caller can leave a message in your voicemail box.
•
Transfer
The caller is redirected to a destination defined by you.
•
- None The announcements for this profile are repeated.
Related Topics
Related Topics
• Presence Status
•
Voicemail Box
•
How to Record an Announcement
•
How to Import an Announcement
•
How to Enable or Disable the Announcement of your Presence Status for
External Callers
•
How to Enable or Disable the Announcement of your Presence Status for
Specific Callers
4.7.2.1 How to Edit a Profile for the Personal AutoAttendant
Prerequisites
•
150
You have recorded an announcement for the relevant status.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Unified Communications
AutoAttendant
Step by Step
1) Click Setup.
2) Click Profiles and then on the profile for the corresponding status.
3) In the row with the appropriate digit, select one of the following options for the
desired Action:
•
If the callers are to be redirected to the voicemail box on entering this digit,
select Record.
•
If the callers are to be transferred to another destination on entering this
digit, select Transfer.
•
If no action is to be taken on entering this digit, select - None -.
4) If you have selected Transfer, enter the phone number in dialable format or
in canonical format in the Destination field.
5) Select one of the following options for the function of the profile:
•
If you want to activate the profile, enable the Profile Active check box.
•
If you want to deactivate the profile, disable the Profile Active check box.
6) Select one of the following options for the announcement of your Presence
status:
•
If you want your voicemail box to announce your Presence status, clear
the Skip Dynamic Greeting check box.
•
If you do not want your voicemail box to announce your Presence status,
enable the Skip Dynamic Greeting check box.
7) Click Save.
Related Topics
Related Topics
• Call Number Formats
•
How to Record an Announcement
•
How to Import an Announcement
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
151
Configuration
5 Configuration
You can configure myPortal for Desktop to suit your requirements by editing your
personal data or the program settings, for example.
Defining Additional Phone Numbers
Additional phone numbers are typically used for:
•
Status-based call forwarding
•
Call-Me service
You can individually configure whether or not your mobile number, external
number 1, external number 2 and private number are to be displayed in the
internal directory. The remaining phone numbers are always displayed in the
internal directory.
Providing your own Picture
If you provide your own picture, it will be shown to other subscribers when they
position their mouse pointers over your entry in the internal directory (Extension
column) or in the Favorites list. You can use an image of any file size. The
communication system saves a copy with a width and height restricted to 200
pixels.
Automatic Login
If you use an automatic login, the Login window is not displayed. For security
reasons, you should avoid using the automatic login if you have shared Windows
user accounts.
Hotkeys (Windows)
You can use any key, possibly in combination with Ctrl or Alt and the Shift
key, as hotkeys for the following functions:
•
Answer/Disconnect call
•
Forward/Transfer call
•
Task bar icon for call
(Screen pop for calls)
•
Desktop Dialing
The only precondition is that the key or key combination is not already being used
by another application.
User name
You can change the user name for your login.
Related Topics
Related Topics
• Directories
152
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
How to Edit your own Name
•
Favorites list
5.1 How to Edit your own Name
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Enter your name in the fields First Name and Last Name.
INFO: All Latin1 characters (ISO-8859-1, Western European) are
allowed.
4) Click Save.
Related Topics
5.2 How to Specify an E-Mail Address
Prerequisites
•
The administrator of your communication system has configured the sending
of e-mails.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Enter your e-mail address under E-mail.
4) Click Save.
Related Topics
Related Topics
• How to Enable or Disable Automatic Updating of the Presence Status via
Outlook Appointments
•
Conferencing (not with OpenScape Office HX)
•
How to Enable or Disable E-mail Notifications
5.3 How to Define an Additional Phone Number
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
153
Configuration
How to Define an XMPP Alias
3) Enter an additional phone number in dialable format or in canonical format in
one of the following fields: Mobile Number, External Number 1, External
Number 2, Private Number or Assistant Number.
4) Select one of the following options:
•
If you do not want to see Mobile Number, External Number 1, External
Number 2 or Private Number displayed in the internal directory, clear the
Visibility check box next to the phone number.
•
If you want to see Mobile Number, External Number 1, External
Number 2 or Private Number displayed in the internal directory, select
the Visibility check box next to the phone number.
5) Click Save.
Related Topics
Related Topics
• Call Number Formats
•
How to Enable the Call-Me Service
•
Status-based Call Forwarding
•
Status-based Call Forwarding
•
Voicemail Box
5.4 How to Define an XMPP Alias
Prerequisites
•
The administrator of your communication system has enabled XMPP.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Enter your XMPP alias under XMPP-ID. Your XMPP alias is the left portion
(e.g., john.public) of your complete XMPP-ID (e.g.,
[email protected]), without the domain name.
The XMPP alias must be unique within the domain.
INFO: You should provide other XMPP communication partners
with your full XMPP ID (e.g.,
xmpp:[email protected]), i.e.,
including the domain name. If required, ask the administrator of
your communication system for the domain name.
4) Click Save.
154
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
How to Provide your own Picture
Related Topics
Related Topics
• How to Send an Instant Message
5.5 How to Provide your own Picture
Prerequisites
•
You have an image file with your picture in one of the following file formats:
BMP, GIF, JPG.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Picture.
3) Click Select.
4) Choose a folder and the desired file and click Open.
5) Click Save.
Related Topics
Related Topics
• How to Delete your own Picture
5.6 How to Delete your own Picture
Step by Step
1) Click Setup.
2) Click on Personal Details > My Picture.
3) Click Delete.
4) Click Save.
Related Topics
Related Topics
• How to Provide your own Picture
5.7 Programming the Function Keys of the Telephone (not for
OpenScape Office HX)
You can customize the function keys of your telephone and any available key
module or BLF module to suit your requirements with via an application in the web
browser.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
155
Configuration
Programming the Function Keys of the Telephone (not for OpenScape Office HX)
This applies to both the predefined function keys and the other function keys, but
not the local application keys (Local App.). The user interface for key
programming is opened in the same language as , if available; otherwise, in
English.
INFO: You cannot program the function keys of an analog phone
with .
In the case of phones with a display, you can also program some
function keys directly at the phone.
Programming Function Keys on Different Levels
You can program the function keys on two levels: the first level can be assigned
all the offered functions, and the second level can be assigned external phone
numbers. The Shift key must be configured on the phone in order to use the
second level. The LED of the function key is always assigned to the first level.
Related Topics
5.7.1 How to Program the Function Keys of the Telephone
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
3) Click on Program Phone Keys. A window for programming the function keys
of the telephone is opened in the web browser.
a) If a message such as There is a problem with this website's
security certificate. appears, click on Continue to this website.
4) Under the phone icon, Click on the key area that you want to edit.
5) In the detailed view of the key area, click on the key icon at end of the
corresponding row. The key icon goes red and indicates that the function is
active for programming.
a) If you want to display details on the current function of a key, move the
mouse pointer over the label field to the left of the key.
6) Select the desired function from the Choose Function drop-down list.
a) If a function requires additional information (parameters), select these
details or enter the required data.
INFO: Select the Shift Key function for a function key to access
a second level where you program external phone numbers.
7) Click Save.
156
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
How to Change the Password
8) If you selected a system phone with automatic key labeling (such as an
optiPoint 420 Standard, for example), you can enter the text that should
appear in the display of the function key in the Labeling column.
9) If you have programmed a function key as the Shift Key, select the check box
2. Level. Enter the external phone numbers as described under steps 6 to8 .
10) If you want to program further function keys, repeat steps 4 to 9 .
11) Close the web browser window for key programming.
12) Click in the Setup window of myPortal for Outlook on Save.
Related Topics
Related Topics
• How to Resolve the Problem: Empty Browser Window for Key Programming
5.8 How to Change the Password
NOTICE: For security reasons, you should change your
password after logging in for the first time. Otherwise,
unauthorized users could, for example, potentially access your
voicemails and fax messages or redirect your station number to
external toll-based destinations by simply using the default
password.
INFO: You can also change the password via the Phone menu of
the voicemail box.
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Under Password, click on Change.
4) Enter your current password in the Current field.
5) Enter your new password in the New and Confirm fields. The password must
not consist of only digits.
INFO: The password applies to myPortal for Desktop,
myPortal for Outlook, Fax Printer Driver, myAttendant and
myAgent, as well as phone access to your voicemail box.
6) Click on OK, followed by Save.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
157
Configuration
How to Change the Login Name
Related Topics
Related Topics
• How to Start myPortal for Desktop
•
Phone Menu of the Voicemail Box
5.9 How to Change the Login Name
Step by Step
1) Click Setup.
2) Click on Personal Details > My Personal Details.
3) Enter the desired user name in the User Name field.
INFO: The user name applies to myPortal for Desktop,
myPortal for Outlook, Fax Printer Driver, myAttendant and
myAgent.
4) Click on OK, followed by Save.
Related Topics
5.10 How to Enable or Disable an Automatic Login
NOTICE: You should use the automatic login only if you are
certain that no-one else has access to your Windows user
account. Otherwise, unauthorized users could, for example,
potentially access your voicemails and fax messages or redirect
your station number to external toll-based destinations.
Step by Step
1) Click Setup.
2) Click on Sensitivity > Security and Access.
3) Select one of the following options:
•
If you want to enable the automatic login, select the check box
Remember my password and automatically log me into myPortal.
•
If you want to disable the automatic login, clear the check box Remember
my password and automatically log me into myPortal.
4) Click Save.
Related Topics
Related Topics
• How to Start myPortal for Desktop
158
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
How to Select the User Interface Language
5.11 How to Select the User Interface Language
Step by Step
1) Click Setup.
2) Click on My Preferences > Appearance.
3) Select the desired Language.
4) Click Save.
Next steps
Close myPortal for Desktop and restart the application.
Related Topics
Related Topics
• User Interface Elements
5.12 How to Change the User Interface
Step by Step
1) Click Setup.
2) Click on My Preferences > Appearance.
3) Select the user interface with the desired appearance in the Skin area.
4) Click Save.
Next steps
Close and restart the client.
Related Topics
Related Topics
• User Interface Elements
5.13 How to Enable or Disable Tabs
Prerequisites
•
You are working with the classic user interface.
INFO: At least one of the tabs always remains active.
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
159
Configuration
How to Restore the Display
Step by Step
1) Click Setup.
2) Click on My Preferences > Appearance.
3) Select one of the following options:
•
If you want to display the Journal tab, select the check box Show Call
History.
•
If you do not want to display the Journal tab, clear the check box Show
Call History.
4) Select one of the following options:
•
If you want to display the Voicemail tab, select the check box Show
Voicemail.
•
If you do not want to display the Voicemail tab, clear the check box Show
Voicemail.
5) Select one of the following options:
•
If you want to display the Fax Messages tab, select the check box Show
Faxes.
•
If you do not want to display the Fax Messages tab, clear the check box
Show Faxes.
6) Select one of the following options:
•
If you want to display the Directories tab, select the check box Show
Directories.
•
If you do not want to display the Directories tab, clear the check box
Show Directories.
7) Click Save.
Related Topics
Related Topics
• User Interface Elements
5.14 How to Restore the Display
Prerequisites
•
You are working with the classic user interface.
To restore the default appearance of the classic user interface, proceed as
follows: All tabs in the main window will then be enabled.
Step by Step
1) Click Setup.
2) Click on My Preferences > Appearance.
160
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
How to Activate or Deactivate a Hotkey
3) Click on Reset Layout.
4) Click Save.
Related Topics
Related Topics
• User Interface Elements
5.15 How to Activate or Deactivate a Hotkey
Prerequisites
•
You are working under Windows.
Step by Step
1) Click Setup.
2) Click on My Preferences > Hot Keys.
3) Select one of the following options:
•
If you want to activate a hotkey, click in the rectangular field next to the
relevant function and hold down one or more of the Shift, Ctrl and Alt
keys while pressing the additional key desired for the key combination. If
the pressed key or key combination can be used for , this is displayed.
Then select the Hot Key Enabled check box next to it.
•
If you want to disable a hotkey, clear the Hot Key Enabled check box next
to that key.
4) Click Save.
Related Topics
5.16 How to Change the Server Address
INFO: Do not change the server address unless you are
instructed to do so by the administrator of your communication
system. You cannot use myPortal for Desktop with an invalid
server address.
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
3) Enter the IP address of the communication system in the Server Address
field.
4) Click Save.
Related Topics
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
161
Configuration
How to Configure the Transfer Method
5.17 How to Configure the Transfer Method
Step by Step
1) Click Setup.
2) Click on My Preferences > Miscellaneous.
3) Select one of the following options in the Transfer Method drop-down list:
•
If you want to use a blind (i.e., unscreened) transfer, select Blind
Transfer.
•
If you want to use a consultation (i.e., screened) transfer, select
Consultation Transfer.
4) Click Save.
Related Topics
Related Topics
• How to Transfer a Call
5.18 Troubleshooting
Help on known issues can be found under Troubleshooting.
Related Topics
5.18.1 How to Resolve the Problem: No Connection to the Communication
System
The Windows/Vista Personal Firewall is enabled by default on installing Windows.
The firewall prevents the connection of your application with the communication
system. Contact your network administrator or the administrator of your
communication system to have the following steps performed:
Step by Step
›
Add the application to the list of exceptions in the Windows Firewall settings
in the Control Panel.
Related Topics
Related Topics
• How to Start myPortal for Desktop
162
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Configuration
Troubleshooting
5.18.2 How to Resolve the Problem: Some other Application Starts Instead
of myPortal
If the Nokia Application Suite is installed on your PC, for example, Java
applications such as myPortal.jar will be erroneously associated
automatically with that application.
Step by Step
›
Select one of the following options:
•
If you want to resolve the problem for myPortal for Desktop and all other
.jar files, re-install the Java Runtime Environment on the respective PC.
•
If you want to resolve the problem for myPortal for Desktop only, correct
the corresponding string under Target in the properties of your desktop
shortcut for myPortal for Desktop with the correct path details for
javaw.exe and myPortal.jar, e.g.:
C:\WINDOWS\system32\javaw.exe -jar "C:\Documents and
Settings\All Users\Application Data\myPortal\myPortal
.jar"
Related Topics
Related Topics
• How to Start myPortal for Desktop
5.18.3 How to Resolve the Problem: Empty Browser Window for Key
Programming
On clicking the Program Phone Keys link, your Browser opens with only an
empty window.
Step by Step
1) Disable the proxy server temporarily in the Connection settings of your web
browser.
2) Refresh the page for programming function keys in your web browser and
complete the key programming.
Next steps
Then reactivate the proxy server in your web browser.
Related Topics
Related Topics
• How to Program the Function Keys of the Telephone
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
163
Appendix
Presence Status Keywords for Outlook Appointments
6 Appendix
The appendix contains additional information.
Related Topics
6.1 Presence Status Keywords for Outlook Appointments
Certain keywords in Outlook appointments enable automatic updating of the
presence status. The keywords are dependent on the language of the user
interface.
Language
Presence status keyword
Croatian
(Croatia)
Ured
Sastanak
Bolovanje
Pauza
Odsutan
Odmor
Ručak
Kuća
Czech
(Czech
Republic)
Kancelář
Porada
Nemoc
Přestávka
Mimo
kancelář
Dovolená
Oběd
Domů
Danish
(Denmark)
Kontoret
Møde
Syg
Pause
Ikke på
kontoret
Ferie
Frokost
Gået for i
dag
Dutch
Kantoor
(Netherland
s)
Bespreking
Ziek
Pauze
Niet op
kantoor
Vakantie
Lunch
Thuis
English
(United
Kingdom)
Office
Meeting
Sick
Break
Out of Office Holiday
Lunch
Home
English
(United
States)
Office
Meeting
Sick
Break
Out of Office Vacation
Lunch
Home
Finnish
(Finland)
Paikalla
Neuvottelus Sairaana
sa
Tauolla
Matkoilla
Lounaalla
Poissa
French
(France)
Bureau
Réunion
Maladie
Pause
Déplacemen Congé
t
Déjeuner
Domicile
German
(Germany)
Büro
Meeting
Sick
Break
Gone Out
Lunch
Zuhause
Hungarian
(Hungary)
Iroda
Találkozó
Beteg
Szünet
Házon kívül Szünidő
van
Ebédidő
Otthon
Italian (Italy) Ufficio
Riunione
Malattia
Pausa
Fuori sede
Vacanza
Pranzo
A casa
Norwegian,
Bokmål
(Norway)
Kontor
Møte
Syk
Pause
ikke på
kontoret
Ferie
Lunsj
Startside
Polish
(Poland)
Biuro
Spotkanie
Chorobowe
Przerwa
Wyszedł
Urlop
Lunch
Dom
164
Lomalla
Vacation
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Appendix
Features of the UC Clients that can be used with SIP Telephones
Language
Presence status keyword
Portuguese
(Portugal)
Escritório
Reunião
Russian
(Russia)
В офисе
Slovenian
(Slovenia)
Doente
Pausa
Fora
Férias
Hora do
almoço
Em casa
На
Болен
совещании
На
перерыве
Ушел
Выходной
Обед
Дома
Pisarna
Sestanek
Bolniška
Odmor
Odsoten
Dopust
Kosilo
Doma
Spanish
(Spain)
Oficina
Reunión
Enfermo
Pausa
Fuera de
oficina
Vacaciones
Pausa de
mediodía
Domicilio
Swedish
(Sweden)
Kontor
Möte
Sjuk
Rast
borta från
kontoret
Semester
Lunch
Hemma
Turkish
(Turkey)
Ofis
Toplantı
Hasta
Mola
Ofis Dışında Tatil
Öğle yemeği Ev
Related Topics
Related Topics
• How to Enable or Disable Automatic Updating of the Presence Status via
Outlook Appointments
6.2 Features of the UC Clients that can be used with SIP Telephones
The following features of the UC clients myAttendant, myPortal for Desktop and
myPortal for Outlook can be used with SIP telephones.
The used SIP telephone must satisfy the following prerequisites:
•
3PCC as per RFC 3725 is supported.
•
The "Call waiting" feature is supported.
•
Do Not Disturb is disabled.
Alternatively, for subscribers with SIP phones, DND can be activated in the
communication system.
INFO: The full functionality of the features depends on the SIP
phone used and cannot be guaranteed.
A successful test of the following features was performed with
OpenStage 15 S.
•
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Connection-/call-oriented features:
–
Make Call
–
Redirect call
–
Resume call
–
Application-controlled conference
–
Hold
–
Toggle/Connect
–
Consultation
165
Appendix
Features of the UC Clients that can be used with SIP Telephones
•
–
Disconnect
–
Transfer
Phone-oriented features:
–
Do Not Disturb
–
Call forwarding
Related Topics
166
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Index
A
absence 32
automatic creation of Outlook appointments 32
ad-hoc conference 87, 92
announcement 117
announcement mode 117
application-controlled conference 88
authentication
conference participant 87
AutoAttendant 147
central 117
personal 117, 148
automatic login 152
automatic updates 24, 152
B
Break 32
C
call
answer 70
missed 61
pick up for another subscriber 70
scheduled 61
call forwarding
rule-based 43
status-based 42
call functions 70
call number format 69
call sender
fax message 131
voicemail 125
callback
journal 61
Phone menu 141
CallMe 32, 41
CallMe service 41
canonical call number format 69
clients, hardware and software prerequisites 17
clipboard dialer 76
color
user interface 152
Column view 11
compact view 11
concept 9
condition
rule-based call forwarding 43
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
conference 87
automatic termination without a conference
controller 88
conference management 88
conference, phone-controlled 88
configuration
152
contact 48, 56
D
desktop dialer 76
Details view 11
dialable call number format 69
dial-in number
conference 87
dialing a number 70
directory 48
make call 70
display conventions 10
Do Not Disturb 32
dynamic announcement 148
E
e-mail
invitation to conference 87
notification 138
specify address 152
exception
rule-based call forwarding 43
External directory 48
F
FastViewer 115
Favorites list
make call 70
favorites list 56
fax box 130
fax message
delete 131
display 131
forward 131
group 131
move 131
retrieve through attendant 117, 130
send 138
fax number 130
first steps 27
167
Index
folder
fax messages 131
voicemail 125
function keys
program 152
functions
myPortal for Desktop 8
Normal view 11
notification
fax message 138
voicemail 138
notification by phone 138
notification service 138
G
Office 32
open conference 112
operating instructions 9
Out of the Office (Away) 32
Outlook contact
import 48
general personal greeting 117
group
voicemail 125
H
Home 32
I
import Outlook contacts 48
installation 17
instant message 144
internal directory 48
introduction 8
invitation
conference 87
J
journal 61
call 70
group entries 61
retention period 61
sort 61
K
key combination for the Desktop Dialer 76
key programming 156
L
language
user language 152
voicemail box 117
Lunch 32
M
Meeting 32
Mobility Entry stations
conferencing 87
presence status 32
myPortal for Desktop
functions 8
N
name
change 152
name announcement 27, 117, 148
168
O
P
password
change 152
Phone menu 141
voicemail box 117
permanent conference 87, 109
personal announcement 148
personal AutoAttendant 148
personal contact 48
personal details 152
personal directory 48
personal greeting 27, 117
Phone menu 141
phone number
additional 152
visibility 152
voicemail box 117
picture
delete 152
provide 152
Presence status
announcements 117
presence status 32, 148
automatic reset 32
automatic update of Outlook appointments 32
call forwarding 42
Mobility Entry stations 32
phone menu 141
screen pops 32
visibility 32
priority 125, 138
private voicemail 125
profile for personal AutoAttendant 148
program settings 152
R
recording mode 117
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
Index
rule 43
S
scheduled conference 87, 99
screen pops 79
search in a directory 48
security concept 26
sent fax messages 131
server address 152
setup 11, 152
Sick 32
SIP telephone
features of UC clients 165
skin 11
skin color 152
SMS
notification 138
sort
directory 48
fax messages 131
voicemail 125
starting myPortal for Desktop 17
status-based call forwarding 42
voicemail box 117, 148
Phone menu 141
W
WAV file
notification 138
voicemail 125
Web Collaboration 115
Z
zoom function 48
T
teleworking 41
TIFF file
fax message 131
notification 138
topics, types 9
troubleshooting 162
U
uninstallation 17
upgrade 25
urgent voicemail 125
user interface 11
classic 11
color 152
language 152
modern 11
user-defined profile, custom profile 148
V
Vacation 32
virtual conference room 87
voicemail
delete 125
forward 125
listen to 125
move 125
private 125
urgent 125
A31003-P1030-U102-13-7619, 05/2012
myPortal for Desktop, User Guide
169
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement