54059-Quikset Table Tennis Table-GoodSport

®

QUIKSET

TABLE TENNIS

ITEM NUMBER: 54059

For all your replacement part needs, please visit: www.franklinsports.com/54059

Please visit www.franklinsports.com/54059 for instructional video

AGES 8+

CAUTION:

Adult assembly required.

--Small parts.

Not for children under 3 yrs.

Made In China

Franklin Sports Inc.

Stoughton, MA 02072

6 7 8

9 10

Nut

6

4

6mm Bolts

7

4

6mm Bolts

Rep.part:54059-RP8

8

11

Metal Washers

9 15

X4 plastic clips

X4

12 13 14

15

4

11

16

12

17

13

18

14

8

19

15

16

20

16

40

21

8

Plastic Tubes

8

18

8

17

22

Corner Cap

8

Carrying Strap

4

ASSEMBLY INSTRUCTIONS

GENERAL NOTE

1. Find a clean, level place to begin the assembly of your Table Tennis Table.

We recommend that two adults work

together to assemble this Table

Tennis Table.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.

STEP 1

3

4 2 4

4 2

1

4

3

2

3

4

1

PARTS x4 x2 x8 x2

NOTE

Open the two Table

Halves (#1) as shown.

Unscrew the 4 Leg

Levelers (#4) to retrieve the two

Support Bars (#2).

Remove the Metal

Posts (#3) and set it aside for later assembly.

STEP 2

4

11

2

CAUTION:

PINCH HAZARD! KEEP HANDS CLEAR.

ITEM#: 54059 2

11

2

PARTS

4

11 x4 x8 x4

NOTE

Open the Metal

U-Legs (#11) as shown and attach the 4

Leg Levelers (#4).

Attach the Support

Bars (#2) to the leg folding hinge as shown.

NOTE

Push up hinge to align the support bar to lock in.

For replacement parts:

Visit: www.franklinsports.com/54059

Email: [email protected]

Call: 1-800-225-8649

STEP 3

2

7

10

3 support bolt

STEP 4

1 5

3

9

6

1

8

4

7

8

2

PARTS

10

3

4

5

6

9

1

PARTS x4 x4 x8 x4

NOTE

Adjust the Support

Bolt (#7) downward so the head of the bolt touches the frame.

Remarks: make sure this process is done on a flat surface.

Lock in Support Bars

(#2) using two 6mm

Bolts (#8).

Repeat the Support

Bar (#2) assembly on both sides as well as the other half of the table.

Attach Plastic Clips

(#10) as shown.

Assembly is completed and you can now turn table halves over.

x2 x8 x1 x4 x4 x2

NOTE

Flip the Table Tops

(#1) and push together. Adjust the

Leg Levelers (#4) until entire table is level.

Insert Metal Posts

(#3) into side holes and secure with

Washers (#9) and

Nuts (#6). Slide Net

(#5) over the posts.

YOU ARE NOW READY TO PLAY!

ITEM#: 54059 3

For replacement parts:

Visit: www.franklinsports.com/54059

Email: [email protected]

Call: 1-800-225-8649