HDMI-IP-R
W
E
L
C
O
To The
M
E
2017 NEW PRODUCTS
NAB EDITION
T#
Tahoma T# (T-Sharp) wall / Multiviewers
T# Multiviewer Platform
The newest member of the TAHOMA Multiviewer family
••
••
••
••
••
••
••
Single frame of processing delay on baseband inputs
Fast boot up ( < 10 seconds)
Modular architecture
All input cards are hot swappable
- CVBS to UHD input cards
- HDMI input cards
- IP (H.264/Mpeg4, Mpeg2) input cards
- SFP input cards can accept SDI fiber or SMPTE 2022 SFPs
Up to 4 outputs per output board (maximum 2 output boards = 8 outputs)
Any input can be duplicated up to 64 times and displayed on any output, regardless of format
Built-in video/audio alarm detection
- video presence/format, video black, video frozen, no WSS/AFD
- audio presence, audio high/low
•• Visual and optional SNMP alarms & logging single frame of processing time
•• Multiple labels per video window - UMD, OMD, IMD and standalone labels
•• Up to 30 presets per output
•• Supports TSL 3.1 and 4.0 (IP and RS232)
•• Supports AXP2 (Apantac eXchange Protocol version 2)
•• Supports 3rd party routers and production switchers*
•• Redundant power supplies
•• Multiple analog and digital clocks
•• 2 sets of “safe area / safe title” markers per image
•• 3 year limited warranty
* Check with your Apantac representative for supported protocols
2
Router 9
Router 11
Commercial
Router 12
Local News
1
NBA
Yahoo - News
US House
Yahoo - Music
Election Analysis
Music
SPORTS
CNN
Router 11
Animal Planet
Router 11
Router 12
Commercial
Local News
5
Animal Planet
Yahoo - Music
Music
Election Analysis
CNN
SPORTS
Comedy
NEWS
Router 11
Router 12
US House
Animal Planet
6
Commercial
NBA
Local News
Local News
Yahoo - News
Yahoo - Music
Yahoo - Music
SPORTS
Yahoo - News
NEWS
CNN
SPORTS
NBA
Yahoo - News
US House
Yahoo - Music
Yahoo - Music
Yahoo - News
SPORTS
Yahoo - News
Comedy
2
Commercial
Yahoo - News
Comedy
Router 12
3
CNN - Atlanta
SPORTS
Music
Election Analysis
CNN
SPORTS
Minnisota Election
Yahoo Finance
Animal Planet
Commercial
Yahoo - News
7
Election Analysis
Election
Comedy
Minnisota Election
NBA
NBA
4
Election Analysis
Yahoo - Financial
Election Analysis
Election Analysis
Router 12
Router
9
Router
9
Router 11
Router 10
Election Analysis
Music
Router 9
Local News
Yahoo Finance
Animal Planet
Commercial
Router 11
Router 12
Commercial
Local News
1
NBA
Yahoo - News
US House
Yahoo - Music
Animal Planet
US House
Election Analysis
CNN
SPORTS
Router 11
Yahoo - News
Vermont
NBA
MUSIC
Router 11
8
Comedy
CNN
12:22:35
New York
COMEDY
Animal Planet
Router 11
Router 12
Commercial
Local News
5
Router 12
Yahoo - Music
Music
Election Analysis
CNN
SPORTS
Comedy
NEWS
Router 11
Router 12
Yahoo - News
SPORTS
Election Analysis
Music
US House
SPORTS
ELECTION
Vermont
Election
Analysis
SPORTS
SPORTS
US
House
ELECTION
CNN
US House
Yahoo - Music
Yahoo - News
Comedy
Up to 1920x1080P / 2048x1080P
HDMI/HDBaseT outputs
w/embedded audio
Animal Planet
Yahoo - Music
Yahoo - News
SPORTS
Animal Planet
6
Commercial
NBA
Local News
Local News
Router 10
Election Analysis
Election Analysis
CNN
SPORTS
NBA
Yahoo - News
US House
Yahoo - Music
Election Analysis
3
Music
Election Analysis
CNN
SPORTS
CNN - Atlanta
Yahoo - News
US House
Yahoo - Music
Minnisota Election
Animal Planet
Yahoo - News
7
Election Analysis
Election
Comedy
Local News
Yahoo Finance
Animal Planet
Commercial
RouterRouter
10
10
Yahoo - News
Vermont
NBA
MUSIC
Router 11
8
CNN
12:22:35
New York
COMEDY
Yahoo - Music
NEWS
Comedy
Animal Planet
SPORTS
Election Analysis
Music
US House
SPORTS
ELECTION
Vermont
Election
Analysis
SPORTS
SPORTS
US
House
ELECTION
CNN
3Gpbs/HD/SD outputs
on BNC/SFP
w/embedded audio
AES/
AA
SDI
HDMI
4
Election Analysis
Yahoo Finance
Commercial
Minnisota Election
NBA
NBA
Router 12
Router
9
Router
9
Router 11
SPORTS
Yahoo - Financial
Music
Yahoo - Music
Yahoo - News
SPORTS
Yahoo - News
Yahoo - Music
2
Commercial
Yahoo - News
RouterRouter
10
10
Yahoo - Music
Comedy
Music
4 or 8 mutiviewer outputs
Up to 64 SDI inputs
or Up to 32 HDMI inputs
or Up to 64 H.264/ASI decodes
or Up to 32 ST-2022-# with SFPs
IP
Configuration
port. 3rd party
router / switcher
interface. SNMP.
ASCII protocol
2 x LTC
RS-232/
RS-422
Discrete
Audio
GPI/O
GPI/O
LTC #1 to
synchronize
clocks.
LTC #2 for
count down /
count up
timer trigger
Serial Control
Panel /
Apantac
ASCII
Protocol /
3rd party
Router/
Switcher
Up to 128
channels of
AES / AA
Balanced/
Unbalanced
discrete
audio
Tally GPI/
Count up/
down clock
Trigger
Alarm GPO or
GPI Control
Panel/
Trigger
3
T#
Tahoma T# (T-Sharp) Multiviewers
T#: 3 FRAME SIZES, 52 PRE-CONFIGURED SDI MULTIVIEWER MODELS.
ANY PRE-CONFIGURED MULTIVIEWER CAN BE EXPANDED EASILY
BY ADDING INPUT OR OUTPUT BOARDS
T# 1 RU
T# 2 RU
T# - 16x4
T# - 8x4-H
T# - 16x4
T# - 24x4
T# - 16x4-IP
T# - 8x4-H
T# - 24-4-IP
T# - 12x4-H
T# - 32x4
T# - 16x4-H
T# - 32x4-IP
T# - 16x4-IP
T# 4 RU
4
T# - 8x4
T# - 24x4
T# - 40x4
T# - 8x4-H
T# - 24x4-H
T# - 40x4-IP T# - 56x4-IP
T# - 8x4-IP
T# - 24x4-IP T# - 40x8
T# - 8x8
T# - 24x8
T# - 40x8-IP T# - 56x8-IP
T# - 8x8-H
T# - 24x8-H
T# - 48x4
T# - 8x8-IP
T# - 24x8-IP T# - 48-4-IP T# - 64x4-IP
T# - 16x4
T# - 32x4
T# - 48x8
T# - 16x4-H
T# - 32x4-H
T# - 48-8-IP T# - 64x8-IP
T# - 16x4-IP
T# - 32x4-IP
T# - 16x8
T# - 32x8
T# - 16x8-H
T# - 32x8-H
T# - 16x8-IP
T# - 32x8-IP
T# - 56x4
T# - 56x8
T# - 64x4
T# - 64x8
ON SCREEN ELEMENTS
•• Audio Support:
- Decode the 16 SDI Embedded Audio
- Display up to 256 meters per output board
- Analog / AES Stereo Monitoring output
•• UMDs & Labels:
- Two 32 Character labels per / Output
- Labels can be Static, Follow input or Dynamic
(TSL)
•• Safe Title / Safe Area Makers:
- Two sets of Markers per Window
- Line and Shadow for Marker Set 1
- Line for Marker Set 2
•• Alarms:
- video presence/format, video frozen, black
- audio presence, audio high/low
- Visual Alarms and GPI output Parameters
•• Analog & Digital Clocks / Counters
- Free running or Sync up to LTC, NTP
- Up and Down Counters
- Control via GPI, AXP protocol
•• Tallies:
- GPI and TSL over IP control
- Five Tally attributes:
- 2 x LED, Text, Background & Border Color
- Up to 4 Tally levels Control with TSL
•• Presets & Configuration:
- Create and Save up to 30 Presets
- Recall them via GPI, AXP protocol over IP with
- Hardware & Software panels
•• Logos:
- Bitmap logos are downloadable
This is not a simulated layout, it is an actual Output of a T#
5
TAHOMAT# Frame Sizes
The T# comes in 3 different frame sizes, 1 RU, 2 RU and 4 RU. All of the frames are
completely modular, therefore different I/O modules can be inserted to form different sizes
of multiviewers.
- All frames are completely modular
- Comes standard dual power supplies
- Coolings are front to back
T# 4 RU Front Inside
OUTPUT PROCESSOR MODULE
HDBaseT TRANSMITTER MODULE
VIDEO PROCESSING MODULES
REDUNDANT POWER SUPPLIES
CONTROL PROCESSOR
T# 4 RU Rear
OUTPUT PROCESSOR MODULE
VIDEO PROCESSING MODULES
HDBaseT TRANSMITTER MODULE
T#
Tahoma T# architectural concepts
6
CONTROL PROCESSOR
REDUNDANT POWER SUPPLIES
T# 2U Front Inside
VIDEO PROCESSING MODULES
REDUNDANT POWER SUPPLIES
OUTPUT PROCESSOR MODULE
CONTROL PROCESSOR
T# 2U Rear
OUTPUT PROCESSOR MODULE
VIDEO PROCESSING MODULES
REDUNDANT POWER SUPPLIES
CONTROL PROCESSOR
T# 1U Front Inside
VIDEO PROCESSING MODULES
REDUNDANT POWER SUPPLIES
OUTPUT PROCESSOR MODULE
CONTROL PROCESSOR
T# 1U Rear
OUTPUT PROCESSOR MODULE
CONTROL PROCESSOR
VIDEO PROCESSING MODULES
REDUNDANT POWER SUPPLIES
7
T#
Tahoma T# (T-Sharp) Multiviewers
The T# (T-Sharp) Multiviewer Platform
The newest member of the TAHOMA Multiviewer family
STANDARD BROADCAST INPUT BOARDS:
••
••
••
••
••
••
••
Each input card supports 8 video inputs
All input cards are hot pluggable
Automatic input aspect ratio detection, by frequency, by WSS and AFD
Decodes closed captioning on Line 21, CEA608/708 on each input
Decodes and displays 16 channels of embedded audio per SDI input
When fully populated, can display up to 64 SDI windows per display
Can mix and match with other input boards
3G/HD/SD-SDI/CVBS INPUT
DISCRETE AUDIO INPUT
8 GPI INPUT FOR TALLY and TIMER CONTROL
8 GPI INPUT FOR TALLY and TIMER CONTROL
T#-UIM-SDI
SFP TYPE BROADCAST INPUT BOARDS:
•• Has all functionality of the standard broadcast input boards
•• Intead of fixed BNCs, there are four SFP slots for future proof inputs
•• SFP modules are sold separately
4 SFP SLOTS
(SFP PURCHASED SEPARATELY)
T#-UIM-SFP
8
DISCRETE AUDIO INPUT
8 GPI INPUT FOR TALLY and TIMER CONTROL
8 GPI INPUT FOR TALLY and TIMER CONTROL
HDMI INPUT BOARDS:
••
••
••
••
••
Each input card supports 4 HDMI inputs
Supports up to 1920x1200 (1080P) input resolutions
All input cards are hot pluggable
When fully populated, can display up to 32 HDMI windows per display
Can mix and match with other input boards
HDMI INPUTS
8 GPI INPUT FOR TALLY and TIMER CONTROL
8 GPI INPUT FOR TALLY and TIMER CONTROL
T#-UIM-HDMI
IP INPUT BOARDS:
••
••
••
••
••
••
••
••
••
••
Each input card has one RJ45 input and 2 ASI Inputs and Loop-out
Each input card can decode up to 8 streams of IP or ASI
Compliant to ISO/IEC 13818-1 MPEG-2 Transport Stream Specification
Demultiplexing incoming SPTS/MPTS
MPEG2/H.264 decode
MPEG2 [email protected], resolution up to 1080P/[email protected]
Supports both 50 and 60Hz
All input cards are hot pluggable
When fully populated, can display up to 64 decode IP windows per display
Can mix and match with other input boards
SIGNAL STATUS
ASI IN/OUT
IP INPUT
8 GPI INPUT FOR TALLY and TIMER CONTROL
T#-UIM-IP
8 GPI INPUT FOR TALLY and TIMER CONTROL
9
T#
Tahoma T# (T-Sharp) Multiviewers
OUTPUT BOARDS:
•• T#-UOM-H-A (STANDARD)
- 4 HDMI and 4 SDI outputs + control interfaces
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- IP, GPI/O, serial, 2 x LTC, AES and AA audio monitoring outputs and genlock
4 SDI OUTPUTS w/2 channels
of Embedded Audio for Monitoring
(Matches the HDMI output)
CASCADING PORTS
HDMI OUTPUTS w/2channels
(RESERVED for FUTURE)
of Embedded Audio for Monitoring
AA Monitoring Genlock
Output
(BB)
T#-UOM-H-A
LTC 1 and 2
AES Monitoring Output
Serial
Control
GPI/O
Control
IP
•• T#-UOM-H-B (OPTION for 4 additional outputs)
- 4 HDMI and 4 SDI outputs
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
CASCADING PORTS
(RESERVED for FUTURE)
HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
4 SDI OUTPUTS w/2 channels
of Embedded Audio for Monitoring
(Matches the HDMI output)
10
T#-UOM-H-B
•• T#-UOM-H-SFP-A (OPTION)
- 4 HDMI output and 2 x SFP Slots + control interfaces
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- IP, GPI/O, serial, 2 x LTC, AES and AA audio monitoring outputs and genlock
2 x SFP SLOTS
(SFP PURCHASED SEPARATELY)
CASCADING PORTS
(RESERVED for FUTURE)
HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
AA Monitoring Genlock
Output
(BB)
T#-UOM-H-SFP-A
LTC 1 and 2
AES Monitoring Output
Serial
Control
GPI/O
Control
IP
•• T#-UOM-H-SFP-B (OPTION)
- 4 HDMI output and 2 x SFP Slots
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
CASCADING PORTS
(RESERVED for FUTURE)
HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
2 x SFP SLOTS
(SFP PURCHASED SEPARATELY)
T#-UOM-H-SFP-B
11
T#
Tahoma T# (T-Sharp) Multiviewers
•• T#-UOM-CAT6-A (OPTION)
- 4 RJ45/CAT6 HDMI Extender and 4 SDI outputs + control interfaces
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- IP, GPI/O, serial, 2 x LTC, AES and AA audio monitoring outputs and genlock
- Comes with 4 passive short-distance receivers up to 35 feet (10 meters)
- Optional active long distance receivers up to 115 feet (35 meters)
4 SDI OUTPUTS w/2 channels
of Embedded Audio for Monitoring
(Matches the HDMI output)
CASCADING PORTS
RJ45 HDMI OUTPUTS w/2channels
(RESERVED for FUTURE)
of Embedded Audio for Monitoring
AA Monitoring Genlock
Output
(BB)
T#-UOM-CAT6-A
LTC 1 and 2
Serial
Control
AES Monitoring Output
GPI/O
Control
IP
•• T#-UOM-CAT6-B (OPTION)
- 4 RJ45/CAT6 HDMI Extender and 4 SDI outputs
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- Comes with 4 passive short-distance receivers up to 35 feet (10 meters)
- Optional active long distance receivers up to 115 feet (35 meters)
CASCADING PORTS
(RESERVED for FUTURE)
RJ45 HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
4 SDI OUTPUTS w/2 channels
of Embedded Audio for Monitoring
(Matches the HDMI output)
12
T#-UOM-CAT6-B
•• T#-UOM-CAT6-SFP-A (OPTION)
- 4 RJ45/CAT6 HDMI Extender and 2 x SFP Slots + control interfaces
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- IP, GPI/O, serial, 2 x LTC, AES and AA audio monitoring outputs and genlock
- Comes with 4 passive short-distance receivers up to 35 feet (10 meters)
- Optional active long distance receivers up to 115 feet (35 meters)
2 x SFP SLOTS
(SFP PURCHASED SEPARATELY)
CASCADING PORTS
(RESERVED for FUTURE)
RJ45 HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
AA Monitoring Genlock
Output
(BB)
T#-UOM-CAT6-SFP-A
LTC 1 and 2
AES Monitoring Output
Serial
Control
GPI/O
Control
IP
•• T#-UOM-CAT6-B (OPTION)
- 4 RJ45/CAT6 HDMI Extender and 4 SDI outputs
- HDMI output resolution up to 1080p @50/60Hz
- SDI output resolution up to 1080p @50/60Hz
- Comes with 4 passive short-distance receivers up to 35 feet (10 meters)
- Optional active long distance receivers up to 115 feet (35 meters)
CASCADING PORTS
(RESERVED for FUTURE)
RJ45 HDMI OUTPUTS w/2channels
of Embedded Audio for Monitoring
2 x SFP SLOTS
(SFP PURCHASED SEPARATELY)
T#-UOM-CAT6-SFP-B
13
T#
Tahoma T# (T-Sharp) Multiviewers
•• T#-UOM-HDBT (OPTION)
- 4 x HDBaseT Extender output. Must be used with T#-UOM-CAT6-A/B or T#-UOM-CAT6-SFP-A/B
- HDMI output resolution up to 1080p @50/60Hz
HDMI INPUTS VIA RJ45
T#-UOM-HDBT
14
HDBaseT OUTPUTS
Notes
15
T#
Tahoma T# (T-Sharp) Multiviewers
OUTPUT 1
OUTPUT 2
OUTPUT 3, 4, 5, 6 =
16
OUTPUT 7
OUTPUT 8
4 x 1080P (UHD)
17
T#
Tahoma T# (T-Sharp) Multiviewers
SPECIFICATIONS
VIDEO INPUTS (8 to 64 auto-detect 3G/HD/SD-SDI, CVBS)
IP: ASI/H.264
Connectors
Signal
HD BNC
3G-SDI
Compliant to ISO/IEC 13818-1 MPEG-2 Transport Stream Specification
SMPTE 424M-2006
Level A and B
Demultiplexing incoming SPTS/MPTS
1920x1080p60 Hz
1920x1080p59.94 Hz
1920x1080p50Hz
MPEG2 [email protected], resolution up to 1080P/[email protected]
Audio
SMPTE 299M
Connectors
Equalization
120 m at 3G
Return Loss
>15db up 1.5GHz
>10db from 1.5GHz to 3GHz
MULTIVIEWER OUTPUTS
HDMI
4 or 8
<0.3UI
Connector
HDMI Type A, HDMI Extender out (RJ45)
HDBaseT (RJ45)
Signal
Formats
Jitter
HD-SDI
MPEG2/H.264 decode
Supports both 50 and 60Hz
4 HDBNC (2 in 2 out), 1 RJ-45
Cable Rearch
15 ft for HDMI, 35 ft RJ45 with passive receiver
Signal
4:2:2 SMPTE 292M-C (1.5Gbps)
Signal Path
8/10 bit output
Formats
720p29.97 Hz, 720p25Hz
720p24Hz, 720p59.94Hz
729p50Hz, 1080i59.94Hz
1080i29.97Hz (PSF), 1080p29.97Hz
1080i50Hz, 1080i25 (PSF)
1080p25Hz, 1080p23.98Hz/24Hz
1080i50Hz
Format
1080P
Supports 50/60 and 59.94 Hz
3G/HD-SDI
4 or 8
Signal
3G/HD-SDI SMPTE 424M and 292M
Return Loss
>15db up 1.5GHz
>10db from 1.5GHz to 3G
Audio
SMPTE 299M
Jitter
3G: <0.3 UI, 1.5 <0.21 UI
Equalization
140m at 1.5 Gbps (Belden 1698A)
LTC INPUT
Return Loss
>15db up to 1.5 GHz
Signal
SMPTE 12M-1995 (EBU3259-E)
Jitter
<0.2 UI
Level
500 mVp-p to 10 Vp-p
Imaedance
> 10k ohm
50/59.94 Hz
SD-SDI
Signal
4:2:2 SMPTE 259M-C (270 mbps)
Refresh Rate
Format
525 and 625
COMMUNICATION
Audio
SMPTE 274M-1994
ETHERNET
Equalization
400m at 270 Mbps (Belden 1694A)
Signal
Return Loss
> 15db up to 270 MHz
SERIAL PORT
Jitter
< 0.2UI
Signal
RS-232
Connector
RJ-45
COMPOSITE
Signal
NTSC (SMPTE-170M)
PAL (ITU624-2)
10/100/1000 Base-T
ANALOG AUDIO OUT
Impedance
< 600 ohm
Phoenix
Signal Level
1V nominal
DC Offset
0V, + - 0.1V
Connector
Impedance
75
VIDEO PROCESSING PERFORMANCE
Return Loss
40db up to 5MHz
Signal Path
8 bit Ycbcr to 24 bit RGB
Processing delay
1 frame in genlock mode,
1-2 frame in non-genlock mode
HDMI
18
ASI/H.264
Signal
HDMI/DVI (with converter cable)
Max Resolution
1920x1080/1920x1200 @ 60Hz
REFERENCE
Audio
4 channels of embedded audio
External
BB
Connector
4 x HDMI Type A female
Connector
HD BNC
SPECIFICATIONS
T# (1 RU) FRAME
Power supply
Optional External Redundant Power Supply
Input voltage
90 - 240 V
Frequency
50 / 60 Hz
Power
150 W max
Dimension
446 x 455 x 44 mm
TEMPERATURE
Range
0 - 40 C
Weight
7.5 kg
COMMUNICATIONS
Ports
Ethernet 10/100 Base-T
Alarm
GPI contacts
T# (2RU) FRAME
GPI In
Power supply
Built-in redundant power supplies
Connectors
RJ50
Input voltage
90 - 240 V
Number of inputs
16 per input card
Frequency
50 / 60 Hz
Pull up voltage
+5 V
Power
200 W max
Source current
2 mA
Dimension
446 x 455 x 87
Activation
0.1 V max
TEMPERATURE
Range
0 - 40 C
Over Voltage
+6.5 V
Weight
10.3 kg
Pulse duration
8 ms min
COMMUNICATIONS
GPI BI-DIRECTIONAL
Ports
Ethernet 10/100 Base-T
Connector
RJ50
Alarm
GPI Contacts
Number of I/O
8
INPUT MODE
T# (4RU) FRAME
Pull-up voltage
+5V
Source current
2 mA
0.1 V max
Power Supply
Hot swappble redundant power supplies
Input voltage
90 - 240 V
Frequency
50 / 60 Hz
Activation
Power
500 W max
Over voltage
+6.5V
Dimensions
446 x 455 x 87
Pulse Duration
8 ms min ??
OUTPUT MODE
TEMPERATURE
Range
0 - 40C
Current
50 mA max
Weight
19.6 kg
Reverse current
-100 mA max
COMMUNICATIONS
Ports
Ethernet 10/100 Base-T
Alarm
GPI contacts
19
Mi SERIES
Crescent - Mi-16
Cost effective 16x1 multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Low latency - single frame processing delay
Low Energy - only uses 15 W of power
Accepts 16 auto-detect 3G/HD/SD-SDI inputs
16 Passive input loop through
Windows can be sized and moved freely
Decode up to 16 embedded audio per SDI input
Total of 64 audio meters
2 simultaneous and identical HDMI and SDI outputs
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, 2 customizable logos
32 GPIs for tallies, count up/down triggers or preset recall
2 digital and 2 analog clocks can be sync’d with
LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
Audio monitoring output - Stereo, AES,
Embedded SDI and HDMI
Optional redundant power supply
3 year limited warranty
RJ50-DB9: GPI Adapter
RJ45-DB9: RS232 Adapter
Accessories
Standard
•• Rack mount
•• 4 x RJ50 to DB9 for GPI
•• 4 x breakout terminal blocks
•• RJ45 to DB9 for serial
•• Analog audio breakout cable
•• CD (software, manual)
Options
•• Redundant power supply
DB9 GPI Breakout
Analog Audio Breakout Cable
Analog Audio Out AES Audio Output
16 video inputs with 16 passive loop outs
GPI/O
GPI/O
IP
Serial
LTC
DC Power
12 V
AC Power
90 - 250V
2 Identical HDMI/DVI and SDI Outputs
20
Crescent - Mi-16+ (plus)
Cost effective Dual output (8+8) multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Low latency - single frame processing delay
Low Energy - only uses 15 W of power
Accepts 16 auto-detect 3G/HD/SD-SDI inputs
16 Passive input loop through
Windows can be sized and moved freely
Decode up to 16 embedded audio per SDI input
Total of 128 audio meters (64 meters per output)
2 separate independent outputs with 8 inputs each
Simultaneous HDMI and SDI outputs
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, 4 customizable logos
32 GPIs for tallies, count up/down triggger or preset recall
2 digital and 2 analog clocks can be sync’d with
LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
Audio monitoring - Stereo, AES, Embedded SDI and HDMI
Optional redundant power supply
3 year limited warranty
RJ50-DB9: GPI Adapter
RJ45-DB9: RS232 Adapter
Accessories
Standard
•• Rack mount
•• 4 x RJ50 to DB9 for GPI
•• 4 x breakout terminal blocks
•• RJ45 to DB9 for serial
•• Analog audio breakout cable
•• CD (software, manual)
Options
•• Redundant power supply
DB9 GPI Breakout
Analog Audio Breakout Cable
Analog Audio Out AES Audio Output
16 video inputs with 16 passive loop outs
GPI/O
GPI/O
IP
Serial
LTC
DC Power
12 V
AC Power
90 - 250V
2 Independent HDMI/DVI and SDI Outputs
21
Mi SERIES
Crescent - Mi-16# (sharp)
Cost effective Dual output (16x2) multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Low latency - single frame processing delay
Low Energy - only uses 15 W of power
Accepts 16 auto-detect 3G/HD/SD-SDI inputs
Passive input loop through
Every input can be duplicated up to 16 times
Every input is available to both outputs
Decode up to 16 embedded audio per SDI input
Total of 128 audio meters (64 meters per output)
2 independent outputs of HDMI and SDI
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, 4 customizable logos
32 GPIs for tallies, count up/down triggers or preset recall
2 digital and 2 analog clocks can be sync’d with
LTC or NTP
Borders can be turned on or off
Safe area markers
Visual Alarm tags for video/audio alarm detection
Audio monitoring - Stereo, AES, Embedded SDI and HDMI
Optional redundant power supply
3 year limited warranty
RJ50-DB9: GPI Adapter
RJ45-DB9: RS232 Adapter
Accessories
Standard
•• Rack mount
•• 4 x RJ50 to DB9 for GPI
•• 4 x breakout terminal blocks
•• RJ45 to DB9 for serial
•• Analog audio breakout cable
•• CD (software, manual)
Options
•• Redundant power supply
DB9 GPI Breakout
Analog Audio Breakout Cable
Analog Audio Out AES Audio Output
16 video inputs with 16 passive loop outs
GPI/O
GPI/O
IP
Serial
LTC
DC Power
12 V
AC Power
90 - 250V
2 Independent HDMI/DVI and SDI Outputs
22
Mi-16 SPECIFICATIONS
Inputs
Loop outs
Connectors
Total Windows
16 3G SDI Level A&B,HD/SD-SDI
16 passive loop outs
16
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Equalization
Power
AES and Analog audio, embedded SDI and HDMI
1920 x 1080p 50/60Hz
SMPTE 424M, 292M, 259M
Alarms
Audio Outputs
Output Resolution
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Embedded Audio
2 identical sets of HDMI & SDI
BNC IEC 61169-8 Annex A
Serial Digital
Return Loss
Video Outputs
General Purpose IO
Serial Port
Up to 32 inputs with RJ50 - DB9 connectors
Connector: RJ45, Baud Rate up to 115200 bps
Protocol: TSL, TSI, AXP
IP
100 Base-Tx, TSL, AXP
Connector: RJ45
SMPTE-272M-A
Electrical
15W, 90-250V 50/60 Hz
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
> 15db up to 1.485 Gbps
> 10db up to 3G
Size
90-250 AC / 12 DC
1 RU, 25 cm (10”)
Mi-16+ SPECIFICATIONS
Inputs
Loop outs
Connectors
Total Windows
16 3G SDI Level A&B, 3G/HD/SD-SDI
Video Outputs
2 independent sets of HDMI & SDI
16 passive loop outs
Audio Outputs
AES and Analog audio, embedded SDI and HDMI
BNC IEC 61169-8 Annex A
Output Resolution
1920 x 1080p 50/60Hz
16
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Serial Digital
SMPTE 424M, 292M, 259M
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
Alarms
Power
> 15db up to 1.485 Gbps
> 10db up to 3G
General Purpose IO
Serial Port
IP
Up to 32 inputs with RJ50 - DB9 connectors
Connector: RJ45, Baud Rate up to 115200
Protocol: TSL, TSI, AXP
100 Base-Tx, TSL, AXP
Connector: RJ45
SMPTE-272M-A
Electrical
15W, 90-250V 50/60 Hz
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
Size
90-250 AC / 12 DC
1 RU, 25 cm (10”)
Mi-16# SPECIFICATIONS
Inputs
Loop outs
Connectors
Total Windows
16 3G SDI level A&B, HD/SD-SDI
Video Outputs
2 independent sets of HDMI, SDI outputs
16 passive loop outs
Audio Outputs
AES and Analog audio, embedded SDI and HDMI
BNC IEC 61169-8 Annex A
Output Resolution
1920 x 1080p 50/60Hz
32+
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Serial Digital
SMPTE 424M, 292M, 259M
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
Alarms
Power
> 15db up to 1.485 Gbps
> 10db up to 3G
General Purpose IO
Serial Port
IP
Up to 32 inputs with RJ50 - DB9 connectors
Connector: RJ45, Baud Rate up to 115200
Format, TSL, TSI, AXP
100 Base-Tx, TSL, AXP
Connector: RJ45
SMPTE-272M-A
Electrical
15W, 90-250V 50/60 Hz
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
90-250 AC / 12 DC
Size
1 RU, 25 cm (10”)
23
Mi SERIES
Crescent - Mx-32
Cost effective quad output (32x4) multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Low latency - single frame processing delay
Low engergy - only uses 75 W of power
Compact - 2RU
Accepts 32 auto-detect 3G Leval A&B /HD/SD-SDI inputs
Every input can be duplicated up to 32 times
Every input is available on all four outputs
Decode up to 16 embedded audio per SDI input
Total of 256 audio meters (64 per output)
4 independent outputs of HDMI and SDI
Ethernet for configuration and external control
Two levels of GPI tally and three levels of serial tally
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
64 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
Embedded HDMI or SDI audio for audio monitoring
3 year limited warranty
RJ50-DB9: GPI Adapter
4 x HDMI Outputs with Embedded Stereo Audio
RJ45-DB9: RS232 Adapter
Serial
Serial
GPI/O
Accessories
Standard
•• Rack mount
•• 8 x RJ50 to DB9 for GPI
•• 8 x breakout terminal blocks
•• 2 x RJ45 to DB9 for serial
•• CD (software, manual)
DB9 GPI Breakout
GPI/O
GPI/O
GPI/O
IP LTC
4 x SDI Outputs that matches
the 4 x HDMI outputs
24
AC Power
90 - 250V
AC Power
90 - 250V
Mx-32 SPECIFICATIONS
Inputs
32 3G Level A&B, HD/SD-SDI
Video Outputs
4 independent sets of HDMI, SDI outputs
Audio Outputs
Embedded HDMI and SDI out
Connectors
BNC IEC 61169-8 Annex A
Output Resolution
1920 x 1080p 50/60Hz
Total Windows
Maximum of 128 Windows
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Serial Digital
SMPTE 424M, 292M, 259M
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
Alarms
Power
General Purpose IO
Serial Port
Up to 64 inputs with RJ50 - DB9 connectors
Connector: RJ45, Baud Rate up to 115200 bps
Protocol: TSL, TSI, AXP
IP
100 Base-Tx, TSL, AXP
Connector: RJ45
SMPTE-272M-A
Electrical
75W, 90-250V 50/60 Hz
No audio, audio high/low, no video,
video format
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
> 15db up to 1.485 Gbps
> 10db up to 3G
Redundant 90-250 AC
Size
2 RU, 48.5 cm (19”)
25
Mi SERIES
Crescent - Mx-32-4KDP
Cost effective UHD multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Low latency - single frame processing delay
Low energy - only uses 85 W of power
Accepts UHD(Quad 3G)/3G/HD/SD-SDI inputs
UHD Display Port (3840x2160p) output
Decode up to 16 embedded audio per SDI input
Total of 128 audio meters
4 SDI outputs (One per quadrant)
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
64 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
Optional redundant power supply
3 year limited warranty
RJ50-DB9: GPI Adapter
UHD Display Port Output (3840x2160)
Accessories
Standard
•• Rack mount
•• 8 x RJ50 to DB9 for GPI
•• 8 x breakout terminal blocks
•• CD (software, manual)
DB9 GPI Breakout
GPI/O
GPI/O
GPI/O
GPI/O
IP LTC
4 x SDI Outputs for each
Quadrant
26
AC Power
90 - 250V
AC Power
90 - 250V
Mx-32-4KDP SPECIFICATIONS
Inputs
UHD (Quad 3G), 3G A&B/HD/SD-SDI
Each UHD input will consume 4 SDI
inputs
Video Outputs
4 SDI outputs (one per quadrant)
Audio Outputs
Embedded HDMI and SDI out
Connectors
BNC IEC 61169-8 Annex A
Output Resolution
3840x2160p 50/60Hz
Total Windows
Maximum of 32 Windows
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Serial Digital
SMPTE 424M, 292M, 259M
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
Alarms
Power
> 15db up to 1.485 Gbps
> 10db up to 3G
General Purpose IO
Serial Port
IP
Up to 64 inputs with RJ50 - DB9 connectors
Not available
100 Base-Tx, TSL, AXP
Connector: RJ45
SMPTE-272M-A
Electrical
85W, 90-250V 50/60 Hz
No audio, audio high/low, no video,
video format
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
Redundant 90-250 AC
Size
2 RU, 48.5 cm (19”)
27
HDMI 2.0
HDMI 2.0 uhd multiviewer
••
••
••
••
••
•
•
•
•
Can display up to 4 video inputs on the same screen
Supports 4 x HDMI inputs (UHD, HD and SD) as well one displayport and one analog VGA inputs
Windows can be sized and moved freely
Supports true 4K/UHD input up to [email protected] at 4:4:4
Supports true 4K/UHD output up to [email protected] at 4:4:4
Supports Deep color and HDCP 1.4 and 2.2
Supports Dolby Digtal 5.1, DTS 5.1 and uncompressed 7.1
Analog stereo audio monitoring output
Can be controlled via RS-232, Ethernet or Webpage
POWER
Stereo Audio RS232
Output
DP
Out
HDMI INPUTS
UHD HDMI
OUTPUTS
28
DP
In
Audio
Input
VGA
In
IP (WEB INTERFACE)
12V DC
Layout Examples: These are actual screen output captures.
Not artist renderings!
Picture in Picture Mode
Multi-layer Picture in Picture Mode
Quad Split Mode
Full Screen Mode
MODEL
MiniDE-4-UHD
Description
UHD Multiviewer
Input
Output
Max Input Resolution
Control
Power Supply
Power Consumption
Environment
4 x HDMI (Female), DP 1.2 x 1, VGA x 1, stereo audio x 1
HDMI 2.0 UHD 4:4:4 with DP 1.2 loop through and stereo audio monitoring output
4096 x 2160 @ 60Hz, 4:4:4 color sampling
Ethernet and RS232
DC 12 3.34A 40W, FCC, CE, UL CCC and PSE
15 W
Operating temperature 0 ~ 45 C
Operating humidity 20 ~ 90% RH
Storage temperature -20 ~ 60 C
Dimension
Weight
1 RU - 440.4 x 230 x 45 mm (L x W x H)
2.72 Kg
29
DP1.2
1x2 Displayport 1.2 splitters/distribution amplifiers
•
•
•
•
•
•
•
•
•
•
DisplayPort 1.2 (DP 1.2) compliant,
Supports 4K2K 60Hz, 24 bits/pixel
Supports 1080P 240Hz, 24 bits/pixel
Supports HBR2/HBR/RBR
Supports SST or MST
Supports 1, 2 or 4 lanes
HDCP compliant
*Supports In/out DP++ (DisplayPort ++ / Dual-mode DisplayPort)
Supports all 3D formats defined in HDMI 1.4 and Display Port 1.2a
Supports all CEA861 standard timing formats
* Dual-mode DisplayPort (also known as DisplayPort++) can directly output single-link HDMI and
DVI signals using a simple passive adapter that adjusts from the different connector and the lower voltages used by DisplayPort. When a dual-mode chipset detects that a DVI or HDMI passive
adapter is attached, it switches to DVI/HDMI mode which uses the 4-lane main DisplayPort link and
the AUX channel link to transmit three TMDS signals, a clock signal and Display Data Channel data/
clock. Dual-mode ports are marked with the DP++ logo; most DisplayPort graphics cards, as well as
all Thunderbolt ports with mDP connector, support this mode.
DP-1x2
1x2 DisplayPort DA
12V DC
Power Status
MODEL
Description
Input
Output
LED Indicators
Output 1
Output 2
DP-1x2
DisplayPort Splitter/Distribution Amplifer
1 x DisplayPort
2 DisplayPort
Power
Maximum Distance
5 meters
Maximum Resolution
4K 60Hz
Weight
30
Reset
DP Input
300g
Power
DC 12V 1200 mA
Dimension
120 x 75 x 25 mm
1x2 Displayport 1.2 splitters/distribution amplifiers
•
•
•
•
•
•
•
•
•
•
DisplayPort 1.2 (DP 1.2) compliant,
Supports 4K2K 60Hz, 24 bits/pixel
Supports 1080P 240Hz, 24 bits/pixel
Supports HBR2/HBR/RBR
Supports SST or MST
Supports 1, 2 or 4 lanes
HDCP compliant
*Supports In/out DP++ (DisplayPort ++ / Dual-mode DisplayPort)
Supports all 3D formats defined in HDMI 1.4 and Display Port 1.2a
Supports all CEA861 standard timing formats
* Dual-mode DisplayPort (also known as DisplayPort++) can directly output single-link HDMI and
DVI signals using a simple passive adapter that adjusts from the different connector and the lower voltages used by DisplayPort. When a dual-mode chipset detects that a DVI or HDMI passive
adapter is attached, it switches to DVI/HDMI mode which uses the 4-lane main DisplayPort link and
the AUX channel link to transmit three TMDS signals, a clock signal and Display Data Channel data/
clock. Dual-mode ports are marked with the DP++ logo; most DisplayPort graphics cards, as well as
all Thunderbolt ports with mDP connector, support this mode.
DP-1x4
1x4 DisplayPort DA
Reset
12V DC
DisplayPort Input
Output 1,2
Power Status
MODEL
Description
Input
Output
LED Indicators
Output 3,4
DP-1x4
DisplayPort Splitter/Distribution Amplifer
1 x DisplayPort
4 DisplayPort
Power
Maximum Distance
5 meters
Maximum Resolution
4K 60Hz
Weight
500g
Power
DC 12V 1200 mA
Dimension
120 x 75 x 25 mm
31
HDMI 2.0 splitter
Supports 4K/UHD 24/25/30/50/60Hz
Supports HDCP 2.2 and HDCP 1.4
Supports 4:4:4, 4:2:2,
Supports BT601, BT709 and BT2020
Supports HDR, SDR
Downward compatible to HDMI 1.4
EDID Management (copy from output 1)
Cascadable for input expansion
1 to 2 HDMI 2.0 Splitter
Output 2
HDMI Input
HDM2.0-1x4
1 to 4 HDMI 2.0 Splitter
Output 1
Power Status
Power Status
HDCP Status
Input Status
Output Status
EDID Mode
12V DC
Output Status
EDID Mode
Reset
HDM2.0-1x2
Input Status
HDCP Status
•
•
•
•
•
•
•
•
•
Reset
HDMI 2.0
HDMI 2.0 splitters/distribution amplifiers
12V DC
Output 1,2
Output 3,4
HDMI Input
32
HDM2.0-1x8
Output 1 to 4
EDID Mode
Input Status
Output Status
12V DC Power Status
HDCP Status
1 to 8 HDMI 2.0 Splitter
Reset
Output 5 to 8
HDMI Input
MODEL
Description
HDM2.0-1x4
HDM2.0-1x4
HDM2.0-1x8
1x2 4K UHD splitter
1x4 4K/UHD splitter
1x8 4K/UHD splitter
2 HDMI (Female)
4 HDMI (Female)
Input
Output
HDMI (Female)
Resolution
4K/UHD 24/25/30/50/60 Hz 4:4:4 and 4:2:2
Cable Distance
33 ft (10 meters) Max
HDCP
HDCP 2.2 and 1.4
Color Space
BT 601, 709 and 2020
Dynamic Range
HDR/SDR
Power
Weight
Dimension
8 HDMI (Female)
DC 12V 1.25A
DC 12V 5A
300g
500g
730g
150x80x25 mm
171x120x25 mm
240x120x25 mm
33
HDBaseT
HDMI 2.0 to fiber extender
•
•
•
•
•
•
•
HDMI 2.0 to Fiber Extenders
Up to 650 feet (200 meters)
Supports 50-micron OM3 or OM4 Fiber with a single SC connector
Video, DDC and HPD is transmitted on a single fiber
Status and Control Data Channel (SCDC) compliant
HDCP 2.2 compliant
Does not support CEC and HEAC.
Multimode Fiber Optical Out
Power
5V DC
HDMI In
Multimode Fiber Optical In
Power
5V DC
HDMI Out
MODEL
Description
Input
Output
Resolution
Video Bandwidth
Max Distance
Fiber Type
Power
Dimension
34
HDM2.0-FIB-Tx
HDM2.0-FIB-Rx
HDMI 2.0 to Fiber Transmitter
HDMI 2.0 to Fiber Receiver
HDMI
SC Fiber Optical Connector
SC Fiber Optical Connector
HDMI
4K/UHD up to 60Hz
6 Gbps / channel
650 feet (200 meters)
OM3/OM4 Multimode glass-fiber
DC 5V 2A
81.1 x 21.1 x 47.5 mm
Notes
35
HDMI 2.0
HDMI 2.0 uhd 4x4 matrix
••
••
••
••
•
•
•
•
•
•
•
•
4 x 4 HDMI 2.0 Matrix
Supports HDCP 2.2 and 1.4 and HDR
Supports resolusions up to [email protected] at 4:4:4 (8bit)
EDID management (copy from output 1)
Supports high definition audio (Dolby TrueHD, Dobly Digital Plus and DTS-HD MA)
Store up to 4 presets
Supports IR pass-through on all I/O ports
Supports IR pass-through on all frequencies
Supports IR pass-through on duplex transmissions between Input and Outputs
Can be controlled via IR remote control
Can be controlled via RS-232
Can be controlled via Ethernet
4 x DESTINATION BUTTONS
ALL KEY PLUG (STATUS)
EDID
4 x SOURCE BUTTONS
STORE PRESETS
RETURN
OFF
RECALL
INFO
DIP SWITCH RS232
POWER HDMI OUTPUTS
IR (TX/RX) I/O
HDMI INPUTS
IP (WEB INTERFACE)
ACCESSORIES
REMOTE CONTROL
36
IR CABLE
HDMI 2.0 up/down converter
Supports up and down conversion from UHD to 1080P and vise versa
Supports HDCP 2.2 and 1.4
Supports resolutions up to 4K/[email protected] at 4:4:4
Resolutions other than 1080P and 4K/UHD will be bypassed
DIP Switch for easy configuration
Status LEDs clears shows the state of the converter
Description
Input
Output
Power Status
Output Status
Input Status
Scaleing Status
12V DC
MODEL
Output 1
Mode
HDMI Input
Reset
••
••
••
•
•
•
HDM2.0-UHD-UDC
HDMI 2.0 up and down converter from UHD/4K to 1080P and vice versa
HDMI (Female)
HDMI (Female)
Max Resolution
4K/UHD 24/25/30/50/60 Hz 4:4:4 and 4:2:2
Cable Distance
33 ft (10 meters) Max
HDCP
HDCP 2.2 and 1.4
Power
DC 12V 1.25A
Weight
300g
Dimension
150x80x25 mm
37
OPS
OPS-SDI-HDTV
SDI to HDMI converter
Key Features
•• Compatible with monitor with Open Pluggable Slot (OPS)
•• 1 x SDI input (3G/HD/SD-SDI)
•• Auto detects 3G SDI (1080p - SMPTE-425M Level A)
HD SDI (720P, 1080i) or SD SDI (525,625)
•• 2 x SDI loop outs
•• 3 year limited warranty
SPECIFICATIONS
Inputs
38
1 x SDI
Output
OPS Connector
Loop Outs
2 x SDI
OPS-HDBT-R
HDBaseT Receiver
Key Features
••
••
••
••
••
Compatible with monitor with Open Pluggable Slot (OPS)
Compatible with HDBaseT transmitters
Receive HDMI on a single CAT6 cable up to 100 meters
IR pass through
3 year limited warranty
SPECIFICATIONS
Inputs
HDBaseT (RJ-45)
IR
In and out
Output
OPS Connector
39
openGear
openGear
Tahoma OG-Mi-9 (opengear)
9 Input opengear multiviewer card with sdi output
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
openGear 3.0 card-based form factor
Low latency - single frame processing delay
Low engergy - only uses 15 W of power
Accepts 9 auto-detect 3G Leval A&B /HD/SD-SDI inputs
Windows can be sized and moved freely
1 SDI output in 1080i/P 50/60Hz with embedded audio
Decode up to 16 embedded audio per SDI input
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
9 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
5 year limited warranty
••
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI Out
GPI
LTC In
OG-Mi-9-RM
OG-Mi-9-MB
40
Rear Module Options
OG-Mi-9-RM (2 slots)
••
••
••
••
9
1
1
1
x
x
x
x
SDI Inputs
LTC Input
SDI Output
RJ50 for GPI/Tally
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
Optional Accessories for RM
•• 11 x HD-BNC to BNC cable
RJ50-DB9: GPI Adapter
DB9 GPI Breakout
How to Order
•• OG-Mi-9-SET-1: OG-Mi-9-MB + OG-Mi-9-RM
•• OG-Mi-9-SET-2: OG-Mi-9-MB + OG-Mi-9-RM + 11 HDBNC to BNC cable
OG-Mi-16 SPECIFICATIONS
Inputs
9 3G SDI Level A&B,HD/SD-SDI
Video Outputs
Connector Type
HD-BNC
Audio Outputs
Total Windows
9
Output Resolution
1920 x 1080p 50/60Hz
Serial Digital
SMPTE 424M, 292M, 259M
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
> 15db up to 1.485 Gbps
> 10db up to 3G
SMPTE-272M-A
General Purpose IO
Serial Port
IP
SDI
Embedded SDI
9 inputs with RJ50 - DB9 connectors
N/A
100 Base-Tx, TSL, AXP
Connector: RJ45
Alarms
No audio, audio high/low, no video,
video format display
Electrical
15 W
Alarms
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
41
openGear
openGear
Tahoma OG-Mi-9+ (opengear)
9 Input opengear multiviewer card with HDMI and Sdi output
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
openGear 3.0 card-based form factor
Low latency - single frame processing delay
Low engergy - only uses 15 W of power
Accepts 9 auto-detect 3G Leval A&B /HD/SD-SDI inputs
Windows can be sized and moved freely
HDMI/SDI output in 1080i/P 50/60Hz with embedded audio
Decode up to 16 embedded audio per SDI input
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
9 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
5 year limited warranty
SDI In
SDI In
HDMI Out
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI Out
GPI
LTC In
OG-Mi-9-RM
OG-Mi-9+-MB
42
Rear Module Options
OG-Mi-9-RM (2 slots)
••
••
••
••
••
9
1
1
1
1
x
x
x
x
x
SDI Inputs
LTC Input
SDI Output
HDMI Output
RJ50 for GPI/Tally
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
Optional Accessories for RM
•• 11 x HD-BNC to BNC cable
RJ50-DB9: GPI Adapter
DB9 GPI Breakout
How to Order
•• OG-Mi-9+-SET-1: OG-Mi-9-MB + OG-Mi-9-RM
•• OG-Mi-9+-SET-2: OG-Mi-9-MB + OG-Mi-9-RM + 11 HDBNC to BNC cable
OG-Mi-16 SPECIFICATIONS
Inputs
9 3G SDI Level A&B,HD/SD-SDI
Video Outputs
1 set of HDMI and SDI
Connector Type
HD-BNC
Audio Outputs
Embedded HDMI and SDI
Total Windows
9
Output Resolution
1920 x 1080p 50/60Hz
Serial Digital
SMPTE 424M, 292M, 259M
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
> 15db up to 1.485 Gbps
> 10db up to 3G
SMPTE-272M-A
General Purpose IO
Serial Port
IP
9 inputs with RJ50 - DB9 connectors
N/A
100 Base-Tx, TSL, AXP
Connector: RJ45
Alarms
No audio, audio high/low, no video,
video format display
Electrical
15 W
Alarms
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
43
openGear
openGear
Tahoma OG-Mi-9# (opengear)
9 Input opengear multiviewer card with Dual output
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
openGear 3.0 card-based form factor
Low latency - single frame processing delay
Low engergy - only uses 15 W of power
Accepts 9 auto-detect 3G Leval A&B /HD/SD-SDI inputs
Windows can be sized and moved freely
2 independent outputs (1 x HDMI + 1 SDI output in
1080i/P 50/60Hz with embedded audio)
Decode up to 16 embedded audio per SDI input
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
9 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
SDI In
SDI In
HDMI Out
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI In
SDI Out
GPI
LTC In
OG-Mi-9-RM
44
OG-Mi-9#-MB
Rear Module Options
OG-Mi-9-RM (2 slots)
••
••
••
••
••
9
1
1
1
1
x
x
x
x
x
SDI Inputs
LTC Input
SDI Output
HDMI Output
RJ50 for GPI/Tally
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
Optional Accessories for RM
•• 11 x HD-BNC to BNC cable
RJ50-DB9: GPI Adapter
DB9 GPI Breakout
How to Order
•• OG-Mi-9#-SET-1: OG-Mi-9#-MB + OG-Mi-9#-RM
•• OG-Mi-9#-SET-2: OG-Mi-9#-MB + OG-Mi-9#-RM + 11 HDBNC to BNC cable
OG-Mi-9 SPECIFICATIONS
Inputs
Connector Type
Total Windows
9 3G SDI Level A&B,HD/SD-SDI
Video Outputs
1 set of HDMI and SDI
HD-BNC
Audio Outputs
Embedded HDMI and SDI
9
Output Resolution
1920 x 1080p 50/60Hz
Serial Digital
SMPTE 424M, 292M, 259M
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
Return Loss
Embedded Audio
> 15db up to 1.485 Gbps
> 10db up to 3G
SMPTE-272M-A
General Purpose IO
Serial Port
IP
9 inputs with RJ50 - DB9 connectors
N/A
100 Base-Tx, TSL, AXP
Connector: RJ45
Alarms
No audio, audio high/low, no video,
video format display
Electrical
15 W
Alarms
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
45
Key Features
•• openGear 3.0 card-based form factor
•• Dashboard control enabled - for simple configuration
•• Mixed format inputs, can be 1+3 (1 HDMI + 3 SDI),
2+2 (2 HDMI + 2 SDI), 3+1 (3 HDMI + 1 HDMI)
•• Low power consumption - 17W
•• Up to 10 modules can be cascaded together
•• Can also be cascaded with OG-MiniQ and OG-Mini-DE-II
modules to create a mix and match format multiviewer
•• Decode up to 4 channels embedded audio per HDMI input
•• Ethernet for configuration
•• Dynamic UMD/labels & Tallies (TSL)
•• Simultaneous HDMI/DVI and SDI outputs
•• 2 GPI tallies per window
•• 8 GPI contacts, can be configured for tally or ASCII protocol
•• Built-in digital clocks can sync with LTC or NTP
•• Borders can be turned on or off
•• Text and background colors have adjustable transparency
•• Safe area markers
•• Stereo analog audio monitoring output
•• 5 year limited warranty
SDI In
HDMI Out
HDMI Inputs
openGear
openGear
Tahoma OG-MiNIDL-x+X (opengear)
MODULAR Cascadable 4 input Multiviewer (up to 40 inputs)
LTC In
SDI Out
GPI
AA Out
OG-MiniDL-3+1-RM
46
OG-MINI-DE-II-MB
Rear Module Options
OG-Mini-DL-1+3-RM (2 slots)
••
••
••
••
••
1
1
1
1
1
x
x
x
x
x
HDMI Input + 3 x SDI Inputs
BNC Output
HDMI Output
RJ50 for GPI/Tally
3-pin Connector for AA Out
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
•• 1 x Type D HDMI male to Type A HDMI
Female cable
•• 3 x HD-BNC to BNC cable
OG-Mini-DL-2+2 (2 slots)
•• 2 x HDMI Inputs + 2 x SDI Inputs
•• 1 x BNC Output
•• 1 x HDMI Output
•• 1 x RJ50 for GPI/Tally
•• 1 x 3-pin Connector for AA Out
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
•• 2 x Type D HDMI male to Type A HDMI
Female cable
•• 2 x HD-BNC to BNC cable
OG-Mini-DL-3+1 (2 slots)
•• 3 x HDMI Inputs + 1 x SDI Inputs
•• 1 x BNC Output
•• 1 x HDMI Output
•• 1 x RJ50 for GPI/Tally
•• 1 x 3-pin Connector for AA Out
Standard Accessories for RM
•• RJ50 to DB9 (for GPI)
•• DB9 to Terminal Block (for GPI)
•• 3 x Type D HDMI male to Type A HDMI
Female cable
•• 1 x HD-BNC to BNC cable
HDMI Out
HDMI Inputs
LTC In
SDI In
HDMI Out
SDI In
SDI In
HDMI Inputs
SDI Out
GPI
LTC In
SDI Out
GPI
AA Out
AA Out
OG-MiniDL-2+2-RM
OG-MiniDL-1+3-RM
How to Order
•• OG-MiniDL-1+3: OG-MiniDE-II-MB + OG-MiniDL-1+3-RM
•• OG-MiniDL-2+2: OG-MiniDE-II-MB + OG-MiniDL-2+2-RM
•• OG-MiniDL-3+1: OG-MiniDE-II-MB + OG-MiniDL-3+1-RM
RJ50-DB9: GPI Adapter
DB9 GPI Breakout
SPECIFICATIONS
Total Windows
4
Output
1 x HDMI/DVI, 1 x SDI
HDM and SDI has embedded audio
Inputs
HDMI / DVI + SDI
HDMI
800x480 to 1920x1200 (1080p)
50/59.94/60Hz
HDMI Type D + HD-BNC
Connector Type
HDMI Type A
Maximum Resolution
up to 1920x1200/1080P60
SDI
Matching the HDMI output
resolution up to 3G with valid SDI
resolutions
Embedded Audio
Decodes and displays 4 channels for HDMI
Decodes and displays 16 channels for SDI
Connector Type
HD-BNC
LTC
1
Analog Audio Output
1
HD-BNC
On Screen Display
Borders, Labels, Tallies, Audio
meters, Alarm tags, Safe area markers
8 for tally or AXP (ASCII command)
IP
1000 Base-T, TSL, AXP_Lite
protocol
RJ-50 (with Terminal Block)
Power
17W
Connector Type
Connector Type
GPI
Connector Type
47
openGear
OG-HDBT-EAPx
HDMI Extender based on HDBaseT technology
Key Features
••
••
••
••
••
••
••
••
••
••
Rear Module Options
openGear 3.0 card-based form factor
HDMI Extender with HDBaseT Technology
Uses a single CAT5E/6 cable
Supports HDMI and DVI formats, 1080P, HD, 3D
1 x HDMI input
1 x HDMI loop out
Cable reach up to 330 ft/100 m
Full audio support, infraRed and RS232 pass through
Low power consumption - 10W
5 year limited warranty
(Occupies 2 Slots)
OG-HDBT-EAPx-RM
•• 1 x HDMI Input
•• 1 x HDMI loop out
•• 1 x RJ-45 outputs
HDBT-1-R
•• HDBaseT Receiver
•• IR Receiver and Blaster Cables
How to Order
•• OG-HDBT-EAPx-SET-1: OG-HDBT-EAPx-MB + OG-HDBT-EAPx-RM
SPECIFICATIONS
Inputs
HDMI
Output
RJ-45 (HDBaseT)
Control
IR Receiver, IR Blaster, RS-232
Loop out
1 x HDMI
IR Extension
HDMI In
IR Blaster
HDMI
Loop out
RS-232
HDBaseT Out
HDBT-1-R
OG-HDBT-EAPx-RM
48 OG-HDBT-EAPx-MB
OG-US-4000
Bi-Directional Universal Scaler w/genlock
Key Features
••
••
••
••
••
••
••
••
••
••
••
Rear Module Options
openGear 3.0 card-based form factor
(Occupies 2 Slots)
Supports HDMI and SDI inputs
Supports HDMI and SDI outputs
OG-US-4000-RM
Supports Genlock
•• 1 x HDMI Input
Scale any SDI input resolution to HDMI and SDI
•• 1 x HDMI Output
SDI output supports 720p, 480i/p, 576i/p, 1080i/p
•• 1 x SDI Input
SDI output frequency in 23.98, 24, 25, 29.97, 30, 50, 59.94, 60Hz •• 1 x SDI Output
HDMI output supports 720p, 480i/p, 576i/p, 1080i/p
•• 1 x Genlock
HDMI output frequency in 50, 60Hz
Low power consumption - 15W
5 year limited warranty
How to Order
•• OG-US-4000-SET-1: OG-US-4000-MB + OG-US-4000-RM
SPECIFICATIONS
Inputs
HDMI and SDI
Output
HDMI and SDI
Control
Dashboard
Genlock
Black Burst via BNC
SDI Out
SDI out
HDMI Out
HDMI in
Genlock
SDI In
OG-US-4000-RM
49
MINI
Crescent Mi-9
Compact 9 input sdi multiviewer
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Accepts 9 auto-detect 3G Leval A&B /HD/SD-SDI inputs
Windows can be sized and moved freely
Low latency - single frame processing delay
Low engergy - only uses 17 W of power
Up to 3 modules can be inserted into a 1RU
Simultaneous HDMI and SDI outputs with embedded audio
Decode up to 16 embedded audio per SDI input
Ethernet for configuration and external control
Dynamic UMD/labels & Tallies (TSL)
Stand alone labels, customizable logos
9 GPIs for tallies, count up/down triggers or preset recall
Built-in analog/digital clocks can sync with LTC or NTP
Borders can be turned on or off
Two sets of safe area markers
Visual Alarm tags for video/audio alarm detection
Accessories
Standard
•• DC 12V power supply
•• RJ50 to DB9 for GPI
•• Breakout terminal block
•• CD (software, manual)
Options
•• 1 RU rack mount
Serial
3G/HD/SD-SDI Input
Power LED
3G/HD/SD-SDI Input
SDI Output
Mini-Q-II
50
DC Power Supply
IP
LTC
Input
HDMI, DVI Output
Mi-9 SPECIFICATIONS
Inputs
9 3G SDI Level A&B,HD/SD-SDI
Video Outputs
Connector Type
HD-BNC
Total Windows
9
Output Resolution
1920 x 1080p 50/60Hz
Serial Digital
SMPTE 424M, 292M, 259M
On Screen Display
Borders, labels, tally
UMD, OMD, IMD, dynamic UMD
Equalization
120m at 2.97 Gbps, 140m at 1.48 Gbps,
400m at 270 Mbps with Belden 1694A
> 15db up to 1.485 Gbps
> 10db up to 3G
Return Loss
Embedded Audio
SMPTE-272M-A
Audio Outputs
SDI
General Purpose IO
Serial Port
IP
Embedded SDI
9 inputs with RJ50 - DB9 connectors
N/A
100 Base-Tx, TSL, AXP
Connector: RJ45
Alarms
No audio, audio high/low, no video,
video format display
Electrical
15 W
Alarms
No audio, audio high/low, no video,
video format display
EMI/RFI
Complies with FCC Part 15 Class A, CE, EU
EMC, C-tick
RJ50-DB9: GPI Adapter
DB9 GPI Breakout
POWER SUPPLY
51
MINI
Crescent Mini-DL-II-x+x
Compact Hybrid MULTIVIEWER
Key Features
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Single frame processing delay
Low power consumption (15W per MiniQ-II)
Compact in depth (10 inches / 25 cm)
Available in 3 models
- Mini-DL-1+3 (1 video + 3 HDMI)
- Mini-DL-2+2 (2 video + 2 HDMI)
- Mini-DL-3+1 (3 video + 1 HDMI)
Windows can be moved and sized freely
Up to 3 modules can be inserted into a 1RU
Up to 3 modules can be cascade together
Decode up to 4 channels embedded audio per
HDMI input
16 channels of embedded audio per SDi inputs
Multiple outputs in DVI/HDMI and SDI
Output resolution up to 1920x1200 (incl. 1080p)
UMD, tallies, borders
Analog and digital clocks
Can decode and display line 21, 608 and 708 CC
on video inputs
Bulit-in video/audio alarm detections - no audio, audio high/low, no video, video black, video frozen
3 year limited warranty
RJ50-DB9: GPI Adapter
RJ45-DB9: RS232 Adapter
Accessories
Standard
••
••
••
••
••
DC 12V power supply
RJ50 to DB9 for GPI
Breakout terminal block
RJ45 to DB9 for Serial
Type D HDMI male to Type A HDMI
female cable
•• HD-BNC to BNC cable
•• CD (software, manual)
Options
•• 1 RU rack mount
DB9 GPI Breakout
POWER SUPPLY
Serial
HDMI Input
SDI Inputs
Power LED
Cascading In and Out
Mini-DL-II-1+3
52
DC Power Supply
IP
SDI Output
Analog Audio Out
LTC Input
HDMI, DVI Output
Serial
HDMI Input
SDI Inputs
Power LED
Cascading In and Out
DC Power Supply
Mini-DL-II-2+2
HDMI, DVI Output
SDI Output
IP
Analog Audio Out
LTC Input
SDI Input
Serial
HDMI Inputs
Power LED
Cascading In and Out
DC Power Supply
Mini-DL-II-3+1
SDI Output
IP
Analog Audio Out
HDMI, DVI Output
LTC/Analog Audio
Input
SPECIFICATIONS
Total Windows
4
Output
1 x HDMI/DVI, 1 x SDI
HDM and SDI has embedded audio
Inputs
HDMI / DVI + SDI
HDMI
800x480 to 1920x1200 (1080p)
50/59.94/60Hz
HDMI Type D + HD-BNC
Connector Type
HDMI Type A
Maximum Resolution
up to 1920x1200/1080P60
SDI
Matching the HDMI output
resolution up to 3G with valid SDI
resolutions
Embedded Audio
Decodes and displays 4 channels
Connector Type
HD-BNC
LTC
1
Analog Audio Output
1
HD-BNC
On Screen Display
Borders, Labels, Tallies, Audio
meters, Alarm tags, Safe area markers
8 for tally or AXP (ASCII command)
IP
1000 Base-T, TSL, AXP_Lite
protocol
RJ-50 (with Terminal Block)
Power
17W
Connector Type
Connector Type
GPI
Connector Type
53
KVM
KVM-1-EH-LAN/KVM-1-RH-KVM
KVM Extenders / Receivers over Ethernet
•
•
•
•
•
•
•
•
•
•
KVM Extender over Gigabit Ethernet network
Extend HDMI, USB 2.0/1.1, RS-232, bidirectional audio, bi-directional IR over a single cable
Built-in HDMI loop-out to eliminate the need for a splitter
Supports bi-directional RS-232 comments at 115,200 baud rate, full duplex
Receiver unit has 4 USB ports to easily extend peripherals such as flash drives, keyboard and mouse
Supports HDMI resolutions up to 1920x1080P
Compatible with HDCP 2.0
Up to 16 transmitters and 200 receivers on the same network
Up to 150 meters on CAT5E cables and 180 meters on CAT6
Requires IGMP and Jumbo frame packets Gigabit switch/hub
KVM-1-EH-LAN-VGA
KVM-1-EH-LAN
KVM-1-RH-LAN
Single-port HDMI/USB/RS232/IR
KVM Extender over Ethernet
Single-port HDMI/USB/RS232/IR
KVM Extender over Ethernet
Single-port HDMI/USB/RS232/IR
KVM Receiver over Ethernet
Loop Out VGA
In LINK OUT
Audio In/Out
USB
Loop Out HDMI
In LAN In
Audio In/Out
USB
IR Emitter HDMI
LAN In
Channels AudioOut
5V DC
5V DC
Channel
RS232
LED Status
IR Emitter
Function
Link
MODEL
Link RS232 5V DC
LED Status IR Emitter Channel
KVM-1-EH-LAN-VGA
Description
Input
Output
USB
KVM-1-EH-LAN
VGA (Female)
USB
KVM-1-RH-LAN
Transmitter
Receiver
HDMI (Female)
VGA (Female)
N/A
HDMI (Female)
Type B (Female)
Type B (Female)
RS-232
Type Ax 4 (Female)
DB-9 Female
IR
3.5 mini Jack x 1
Audio (Input / output)
3.5 min Jack x 2
Video Selection
Rotary dial x 1
Tact Switch x2
Function Select button
Tact switch x 2
N/A
Ethernet Connections I/O
Maximum Distance
Maximum Resolution
Dimension
54
IR
LED Status RS232
Power
1 x RJ45
Within a LAN: 100 meters. Point to point: 150 meter with CAT5E, 180 meters with CAT6
1080P/1920 x 1200
62 mm W x 113 mm D x 29 mm H
DC 5V 2000 mA
CAT6
Audio
RS-232
IR
USB
180 m
KVM-1-EH-LAN
KVM-1-RH-LAN
Illustration of 1 to 1
CAT6
CAT6
100 m
100 m
Network Switch/Hub
KVM-1-EH-LAN
KVM-1-RH-LAN
CA
T6
10
0m
Network Switch/Hub
KVM-1-RH-LAN
Illustration of 1 to Many
KVM-1-RH-LAN
CAT6
CAT6
100 m
KVM-1-EH-LAN
100 m
Network Switch/Hub
KVM-1-RH-LAN
6
CAT
m
100
KVM-1-EH-LAN
KVM-1-RH-LAN
Network Switch/Hub
Illustration of Many to Many
CA
T6
10
KVM-1-RH-LAN
0m
55
•
•
•
•
•
Can extend EVS XT3 control and monitoring signal up to 600 feet away
Local VGA, PS2 output
VGA, PS2, 2 x RS-422 signals are combined into a single CAT5e/6
USB port can be used with newer models of EVS XT3
With the use of an RJ45 patch panel, the CAT 5e/6 cable can be easily patched to freely assign the
operator positions with the EVS XT3 video servers
EVS-1-E
EVS-1-R
USB
(RESERVED)
Local PS2
STATUS
USB
RJ45
GAIN/EQ
(RESERVED)
IN
Local PS2
12V DC
STATUS
RJ45
Local
OUT
VGA OUT
RS-422 RS-422
12V DC RS-422 RS-422 VGA OUT
VGA IN
PS2 IN
USB
(RESERVED)
Local Monitor
Remote Monitor
VGA
CAT 5E/6
Up to 600 feet
PS2
PS2
Remote Keyboard
VGA
Local Keyboard
VGA
PS2
RS-422
RS-422
KVM
EVS XT3 Extender
EVS Extender Application Diagram
MODEL
EVS-1-E
EVS-1-R
EVS XT3 Extender
EVS XT3 Receiver
2 x RS422, 1 x PS2, 1 x VGA, USB (reserved)
RJ-45
OUTPUT
1 x PS2, 1 x VGA, USB, RJ-45
2 x RS422, 1 x PS2, 1 x VGA, USB
POWER
12V DC
12 V DC
192 x 80 x 122 mm
192 x 80 x 122 mm
Magnetic
Magnetic
DESCRIPTION
INPUT
DIMENSIONS
MOUNT
56
chyron Mosaic XL and Evs Extender
• Can extend Chyron Mosaic XL and EVS XT3 control and monitoring signal up to 600 feet away
• Local VGA, PS2 output
• VGA, PS2, 2 x RS-422 signals are combined into a single CAT5e/6
• USB port and PS2 can work simultaneously
• With the use of an RJ45 patch panel, the CAT 5e/6 cable can be easily patched to freely assign the
operator positions with the EVS XT3 video servers
EVS-1-E-II
EVS-1-R-II
USB
(RESERVED)
Local PS2
12V DC
STATUS
RJ45
Local
OUT
VGA OUT
RS-422 RS-422
VGA IN
PS2 IN
Local PS2
STATUS
USB
RJ45
GAIN/EQ
(RESERVED)
IN
12V DC RS-422 RS-422 VGA OUT
USB
(RESERVED)
MODEL
EVS-1-E-II
EVS-1-R-II
Chyron Mosaic XL Extender
Chyron Mosaic XL Receiver
2 x RS422, 1 x PS2, 1 x VGA, USB
RJ-45
OUTPUT
1 x PS2, 1 x VGA, USB, RJ-45
2 x RS422, 1 x PS2, 1 x VGA, USB
POWER
12V DC
12 V DC
192 x 80 x 122 mm
192 x 80 x 122 mm
Magnetic
Magnetic
DESCRIPTION
INPUT
DIMENSIONS
MOUNT
57
DVI
DVI Fiber Optic Extender (1,500 ft/500 m)(1500m/4500ft)
(DVI-xx-LC-II)
DVI-xx-SC-DL
• Extends DVI (Single Link) signals
• Extends up to 500 meters (1500 feet) via a LC duplex multimode cable (50/125μm)
• Extends up to 1500 meters (4500 feet) via a LC duplex single mode cable
(9/125μm)
• Does not support HDCP
• Maximum resolution is 1920x1200 @ 60Hz and [email protected]
• Compliant with DVI-D 2.0 specification
• Uses multi wavelength optical transceivers VCSEL 1310/1550nm, Bandwidth 6Gb/s
POWER ADAPTOR
MODEL
DVI-xx-LC-II-Tx
DVI-xx-LC-II-Rx
Transmitter
Receiver
Input
1 x DVI-D (male)
2 x LC Connector (female)
Output
2 x LC connectors
1 x DVI-D (male)
Description
Fiber Optic
Video Bandwidth
Distance
Power Consumption
Dimension
Operating Temp
Storage Temp
58
Duplex Multi-mode (50/125μm) or Duplex Single Mode (9/125μm)
6 Gbps / Channel
Single Mode 1920x1200/1080P @ 1500 m (4,500 ft), Multimode 1920x1200/1080P @ 500 m (1,500 ft)
2.00 W
40 x 70 x 15 mm (Wx D x H)
0°C ~ 50°C
-20°C ~ 65°C
HDMI 2.0 Cable booster
HDM2.0-Cable-Booster
•
•
•
•
Turn any regular HDMI (1080P or less) cable to an HDMI 2.0 (18G) cable
Supports up to 20 meters in full HDMI 2.0 mode
Supports up to 30 meters for 1080P cable
Ideal for lecture room installation when two or more cables needs to be connected
For example: Between projector to wall plate to lecturn to laptop
• Optional USB power for multi level cascading repeater (up to 3 levels)
MODEL
Description
Input
Output
Distance
Option
HDM2.0-Cable-Booster
Cable Booster
1 x HDMI Type A (female)
1 x HDMI Type A (male)
20 meters for HDMI 2.0/UHD, 30 meters for 1080P
5 V optional power for cascading not included
59
PTG
pattern generator - Hand held - HDMI 2.0
•
•
•
•
•
•
•
•
•
•
HDMI 2.0(a) - 600 Mcsc, [email protected] 4:4:4 maximum resolution
HDR Injector, and management
18 Gbps video bandwidth
Supports BT.2020
4K 10, 12, 16 bit support
Dolby Vision Support
HDCP 2.2 Compatible
16 bit per pixel, Deep Color Depth available (48 bit)
Portable battery operated
DC 5V power
Settings:
Resolutions Supported
Color Modes
VESA
Std Video
RGB (0 - 255)
640x480
480i (59.94)
RGB (16-235)
800x600
480P (59.94)
YC444
1024x768
720P (59.94)
YC420
1280x768
720P (60)
AUTO
1360x768
1080i (59.94)
1280x960
1080i (60)
Operating Modes:
1280x1024
1080P (23.94)
HDMI
1400x1050
1080P (24)
DVI
1600x1200
1080P (29.97)
AUTO
1920x1200
1080P (30)
HDCP Modes:
3D Video
OFF
720P 3D (59.94)
HDCP 1.4
720P 3D (50)
4K Video
32K
96K
16bit
24bit
HDCP 2.2
720P (60)
4K (23.98)
44K
176K
20 bit
Auto
1080P 3D (60)
4K (24)
48K
192K
1080P 3D (24)
4K (25)
88K
Auto
SIX-G - Generator
1080P (59.94)
Deep Color Depth:
8 bit
1080P (60)
Audio Sample Rates:
Audio Bit:
4K (29.97)
10 bit
25/50 FPS:
4K (30)
Audio Output Settings:
16 bit
576i (50)
4K (50)
AUTO
576P (50)
4K (59.94)
36 different audio output settings between 2
channel to 7.1 channel.
720P (50)
4K (60)
EDID Functions:
1080i (50)
SMPTE 4K (23.98)
Read EDID
1080P (25)
SMPTE (24)
Save EDID
1080P (50)
SMPTE (25)
Open EDID
SMPTE 4K (29.97)
* SMPTE 4K = 4096x2160
**4K = 3840x2160
SMPTE 4K (30)
SMPTE 4K (50)
SMPTE 4K (59.94)
SMPTE 4K (60)
60
Signal analyzer - hand held - HDMI 2.0
Key Features
• Analyze any HDMI/DVI signals up to 18 Gbps
(4096x2160P60 4:4:4)
• Test HDMI/DVI cables up to18 Gbps, full TMDS testing
• View up to 18Gbps video content & format info anywhere
• Analyze & report HDMI distribution system over time
(minutes, hours, day) - down to the pixel
• Audio confidence tests - 2 channel & multichanel
• Advanced EDID analysis & tools - Read & Write EDID
• Analyze HDR signals & metadata
• Report & analyze InfoFrames
• HDCP tester - 2.2, 1.4 or none
SIX-A - Analyzer
Technical Specifications
•
•
•
•
•
•
•
•
HDMI 2.0(a) - 600 Mcsc, [email protected] 4:4:4 maximum resolution
HDR Injector, and management
18 Gbps video bandwidth
Supports BT.2020
4K 10, 12, 16 bit support
Dolby Vision Support
HDCP 2.2 Compatible
16 bit per pixel, Deep Color Depth available (48 bit)
Analyzer and Pattern Generator Bundle
61
EDID Tools
EDID Tools - hdmi
EDID-L-H
HDMI EDID Learner and Emulator bundle
•
•
•
•
•
HDMI EDID Learner and Emulator bundle
Passive inline device. DOES NOT require external power
Supports up to UHD EDID Emulation*
Emulators can be easily reprogramed as needed
Low cost emulators can be purchased seperately without having to purchase the learner
* Some 4K/UHD monitors may require the use of the 4K adapter for learning
• HDMI EDID Learner
• Can be used repeately to program multiple EDID Emulators
READ/WRITE STATUS LED
READ/WRITE STATUS LED
to DB15 ADAPTER CABLE
HDMI EDID EMULATOR
EDID LEARNER
HDMI to DB15 ADAPTER CABLE
EDID LEARNER
• Low cost inline HDMI EDID Emulator
• Can be programed multiple times
• Can be purchased separately without the EDID Learner
READ/WRITE STATUS LED
HDMI EDID EMULATOR
62
Adapter
HDMI to DB15 4K
ADAPTER
CABLE
EDID LEARNER
EDID Tools - hdmi 2.0
EDID-EW-H
HDMI 2.0 EDID Emulator and Learner
•
•
•
•
•
•
All in one, EDID learner and writer
Passive inline device. DOES NOT require external power
Supports up to HDMI 2.0 and compliant with HDCP 2.2
Comes with 16 preinstalled EDID
Bi-directional. Can be used as a male or female
Can be used repeately to learn different EDID
Preinstalled EDID Table
Block 0 (for computers
Block 1 (for players)
0
Extenernal EDID - Learning Mode
---
---
1
480P
[email protected]
[email protected]
2
720P
[email protected]
[email protected]
3
1080i
[email protected]
[email protected]
4
1280x768_60
[email protected]
[email protected]
5
1280x1024_60
[email protected]
[email protected]
6
1366x768_60
[email protected]
[email protected]
7
1400x1050_60
[email protected]
[email protected]
8
1680x1050_60
[email protected]
[email protected]
9
1600x1200_60
[email protected]
[email protected]
A
1920x1080_24
[email protected]
[email protected]/[email protected]
B
1920x1080_60
[email protected]
[email protected]
C
1920x1200_60
[email protected]
[email protected]
D
3840x2160_30
[email protected]
[email protected]/[email protected]
E
3840x2160_60
[email protected]
[email protected]
F
4096x2160_60
[email protected]
[email protected]
63
SDI
SDI Fiber Optic Extenders
SFP-FIB-SDI-SET -SFP-FIB-SDI-CONV-tx + sfp-fib-sdi-conv-rx
•
•
•
•
•
•
Single channel 3G/HD/SD-SDI over Optic Fiber
SDI loop out on the transmitter side
Includes Apantac SFP-SDI-Tx and SFP-SDI-Rx that uses LC connectors
Automatically reclocking at 2.97 Gbps, 1.485 Gbps and 270 Mbps
Supports SMPTE 424 M, 292M, 259M and DVB-ASI
Maximum distance up to 10 km
SFP-FIB-SDI-CONV-Tx
SFP-FIB-SDI-CONV-Rx
SFP-FIB-SDI-Tx
SFP-FIB-SDI-Rx
Tx
Input Formats
Input Connector
Input Looping
Cable Equalization
Output Cable Reach
Output Connector
Jitter
Rise/Fall time
Overshoot
SMPTE 424M, SMPTE 292M, SMPTE 259M, DVB-ASI
1 x BNC - 75 ohm
LC Simplex Fiber Connector
1 x BNC - 75 ohm
N/A
3G: 90m, HD-SDI: 150m SD-SDI: 300m
N/A
N/A
3G: 60m, HD-SDI: 125m SD-SDI: 300m
LC Simplex Fiber Connector
1 x BNC - 75 ohm
< 0.2 UI
135 ~ 800 ps
< 10%
Input Power
5V 4A DC
Power Consumption
10 Watts
Operating Temperature
0 to 40 C
Storage Temperature
Operating Humidity
64
Rx
Weight
-20 to 60 C
20 ~ 90% (non-condensing)
350 g per pair
Notes
65
SDI
single SDI Fiber Optic Transmitter - SFP module
•
•
•
•
•
•
•
•
•
•
Dual channel transmitter
Supports SMPTE-424M, 292M, 259M and DVB-ASI
For use with SFP-FIB-SDI-CONV-Tx
LC Simplex connectors - single mode
Pluggable and hot swappable
Supports 3G up to 10 km over a single fiber
Single +3.3 power supply
Low power consumption - 120 mA typical
Complies with FCC, TUV and UL standards
Lead free and RoHS compliant
OPTICAL PERFORMANCE SPECIFICATION
Paramter
Min
Typ
Max
-8
-5
-3
1290
1310
1330
5.0
9
-
2.97 Gb/s
-
45
80
1.485 Gb/s
-
45
80
270 Mb/s
-
45
80
2.97 Gb/s
-
-
135
1.485 Gb/s
-
-
270
270 Mb/s
-
-
400
2.97 Gb/s
-
-
135
1.485 Gb/s
-
-
270
270 Mb/s
-
-
400
Min
Typ
Max
0
-
70
Storage temperature range (degree C)
-40
-
85
Power supply voltage (V)
3.1
3.3
3.5
Power consumption (mA)
-
120
200
Optical Power (dBm)
Wavelength (nm)
Linear Extinction Ratio
Intrinis Jitter (ps)
Optical Signal Rise Time (Ps)
Optical Signal Fall Time (ps)
ELECTRICAL SPECIFICATION
Paramter
Operating case temperature range (degree C)
66
Single SDI Fiber Optic receiver - SFP module
•
•
•
•
•
•
•
•
•
•
Dual channel transmitter
Supports SMPTE-424M, 292M, 259M and DVB-ASI
For use with T# UOM-SFP rear module
LC Simplex connectors - single mode
Pulggable and hot swappable
Supports 3G up to 10 km over a single fiber
Single +3.3 power supply
Low power consumption - 200 mA typical
Complies with FCC, TUV and UL standards
Lead free and RoHS compliant
OPTICAL PERFORMANCE SPECIFICATION
Paramter
Min
Typ
Max
1260
-
1620
2.97 Gb/s
-18
-
-
1.485 Gb/s
-18
-
-
270 Mb/s
-18
-
-
-
-
-1
-35
-
-
-
-
-16
0.5
2
-
Min
Typ
Max
Wavelength (nm)
Receiver Sensitivity (dBm)
Overload (dBm)
Loss of Signal Assertd (dBm)
Loss of Signal De-asserted (dBm)
Optical Hysteresis (dB)
ELECTRICAL SPECIFICATION
Paramter
Operating case temperature range (degree C)
0
-
70
Storage temperature range (degree C)
-40
-
85
Power supply voltage (V)
3.1
3.3
3.5
Power consumption (mA)
-
100
150
67
SDI
DUAL SDI Fiber Optic Transmitter - SFP module
•
•
•
•
•
•
•
•
•
•
Dual channel transmitter
Supports SMPTE-424M, 292M, 259M and DVB-ASI
For use with T# UIM-SFP rear module
LC Simplex connectors - single mode
Pluggable and hot swappable
Supports 3G up to 10 km over a single fiber
Single +3.3 power supply
Low power consumption - 260 mA typical
Complies with FCC, TUV and UL standards
Lead free and RoHS compliant
OPTICAL PERFORMANCE SPECIFICATION
Paramter
Min
Typ
Max
-8
-5
-3
1290
1310
1330
5.0
8
-
2.97 Gb/s
-
45
80
1.485 Gb/s
-
45
80
270 Mb/s
-
45
80
2.97 Gb/s
-
-
135
1.485 Gb/s
-
-
270
270 Mb/s
-
-
400
2.97 Gb/s
-
-
135
1.485 Gb/s
-
-
270
270 Mb/s
-
-
400
Min
Typ
Max
0
-
70
Storage temperature range (degree C)
-40
-
85
Power supply voltage (V)
3.1
3.3
3.5
Power consumption (mA)
-
260
400
Optical Power (dBm)
Wavelength (nm)
Linear Extinction Ratio
Intrinis Jitter (ps)
Optical Signal Rise Time (Ps)
Optical Signal Fall Time (ps)
ELECTRICAL SPECIFICATION
Paramter
Operating case temperature range (degree C)
68
DUAL SDI Fiber Optic receiver - SFP module
•
•
•
•
•
•
•
•
•
•
Dual channel transmitter
Supports SMPTE-424M, 292M, 259M and DVB-ASI
For use with T# UOM-SFP rear module
LC Simplex connectors - single mode
Pulggable and hot swappable
Supports 3G up to 10 km over a single fiber
Single +3.3 power supply
Low power consumption - 200 mA typical
Complies with FCC, TUV and UL standards
Lead free and RoHS compliant
OPTICAL PERFORMANCE SPECIFICATION
Paramter
Min
Typ
Max
1260
-
1620
2.97 Gb/s
-16
-
-
1.485 Gb/s
-16
-
-
270 Mb/s
-16
-
-
-
-
-1
-35
-
-
-
-
-16
0.5
2
-
Min
Typ
Max
Wavelength (nm)
Receiver Sensitivity (dBm)
Overload (dBm)
Loss of Signal Assertd (dBm)
Loss of Signal De-asserted (dBm)
Optical Hysteresis (dB)
ELECTRICAL SPECIFICATION
Paramter
Operating case temperature range (degree C)
0
-
70
Storage temperature range (degree C)
-40
-
85
Power supply voltage (V)
3.1
3.3
3.5
Power consumption (mA)
-
200
300
69
SDI
1x2 passive splitter
•
•
•
•
Compact 1x2 passive splitter
Cable reach up to 100 meters (330 ft) End to End
Compatible for 3G/HD/SD-SDI/CVBS/ASI
Also available in a rack mount that holds up to 16 1x2 splitters
DA-2HD
2 OUTPUTS
INPUT
DA-2HDX16
70
Notes
71
HDMI Extender over Gigabit Ethernet network
Supports IR and RS-232 Extension
Supports up to 100 meters on [email protected]
Built-in HDMI loop through to eliminate the need for a splitter
Transports HDMI via H.264 Baseline profile up to 18Mbps + 48K/16bit 2chan192 Kbps MP3
Supports UDP IP protocol and Multicast (Other IP protocols available soon)
HDMI and HDCP compliant
Built-in Web server for system setup
Supports HDMI resolutions up to 1920x1200/1080P
HDMI-IP-E
HDMI-IP-R
Single-port HDMI/RS232/IR
Extender over Ethernet
Link RS232
Single-port HDMI/RS232/IR Receiver over
Ethernet
Link RS232
DIP SW
HDMI Out/In
12V DC
DIP SW
12V DC
MODEL
HDMI-IP-E
HDMI-IP-R
Description
Transmitter
Receiver
Input
HDMI (Female)
Output
N/A
HDMI (Female)
LED Indicators
Power
LINK
RJ-45 x 1
IR 2 IN
N/A
3.5 mini Jack x 1
IR OUT
3.5 min Jack x 2
N/A
IR Carrier Frequancy
20 KHz ~ 60 KHz
BAUD Rate Settings
3 Pin DIP switch
ID DIP Switch
8 Pin DIP switch
RS-232 Connector
DB9 Femaile x 1
Maximum Distance
100 meters. Point to point @ 1080P
Maximum Resolution
72
HDMI Out
IR In
Baud Rate
Reset
Power
•
•
•
•
•
•
•
•
•
IR Out
Baud Rate
Reset
Power
HDMI
HDMI-IP-E/HDMI-IP-R
HDMI Extenders / Receivers over Ethernet
1080P60Hz
Weight
338 g
Power
DC 12V 1200 mA
Dimension
120x75x33 mm
surge protectors
RJ45-SP
• Protects equipment from high voltage surge such as lightening
• Designed to protect HDBaseT extenders or any equipment with
net work ports
• Supports bandwidth up to 10Gbps
• Built in ESD, EFT (impulse noise)
• Compliant with IEC61000-4-2, IEC61000-4-5, IEC1000-4-5
HDMI-SP
• Protects HDMI equipment from high voltage
surge such as lightening
• Supports HDMI 1.4, 3D and ARC
• Supports HDCP
SDI-SP
• Protects SDI equipment from high voltage
surge such as lightening
• Protects surge up to 8KV
• Discharging current up to 10KA
• Raction speed < 1ns
73
HDMI Extender over Gigabit Ethernet network
Supports IR and RS-232 Extension
Supports up to 100 meters on [email protected]
Built-in HDMI loop through to eliminate the need for a splitter
Transports HDMI via H.264 Baseline profile up to 18Mbps + 48K/16bit 2chan192 Kbps MP3
Supports UDP IP protocol and Multicast (Other IP protocols available soon)
HDMI and HDCP compliant
Built-in Web server for system setup
Supports HDMI resolutions up to 1920x1200/1080P
HDMI-IP-E
HDMI-IP-R
Single-port HDMI/RS232/IR
Extender over Ethernet
Link RS232
Single-port HDMI/RS232/IR Receiver over
Ethernet
Link RS232
DIP SW
HDMI Out/In
12V DC
DIP SW
12V DC
MODEL
HDMI-IP-E
HDMI-IP-R
Description
Transmitter
Receiver
Input
HDMI (Female)
Output
N/A
HDMI (Female)
LED Indicators
Power
LINK
RJ-45 x 1
IR 2 IN
N/A
3.5 mini Jack x 1
IR OUT
3.5 min Jack x 2
N/A
IR Carrier Frequancy
20 KHz ~ 60 KHz
BAUD Rate Settings
3 Pin DIP switch
ID DIP Switch
8 Pin DIP switch
RS-232 Connector
DB9 Femaile x 1
Maximum Distance
100 meters. Point to point @ 1080P
Maximum Resolution
74
HDMI Out
IR In
Baud Rate
Reset
Power
•
•
•
•
•
•
•
•
•
IR Out
Baud Rate
Reset
Power
HDMI
HDMI-IP-E/HDMI-IP-R
HDMI Extenders / Receivers over Ethernet
1080P60Hz
Weight
338 g
Power
DC 12V 1200 mA
Dimension
120x75x33 mm
surge protectors
RJ45-SP
• Protects equipment from high voltage surge such as lightening
• Designed to protect HDBaseT extenders or any equipment with
net work ports
• Supports bandwidth up to 10Gbps
• Built in ESD, EFT (impulse noise)
• Compliant with IEC61000-4-2, IEC61000-4-5, IEC1000-4-5
HDMI-SP
• Protects HDMI equipment from high voltage
surge such as lightening
• Supports HDMI 1.4, 3D and ARC
• Supports HDCP
SDI-SP
• Protects SDI equipment from high voltage
surge such as lightening
• Protects surge up to 8KV
• Discharging current up to 10KA
• Raction speed < 1ns
75
HEADQUARTERS
7470 SW Bridgeport Road
Portland, OR 97224
T: +1 503 968 3000
F: +1 503 389 7921
E: [email protected]
www.apantac.com
US West Coast
T: +1 714 815 7421
F: +1 714 879 3079
E: [email protected]
US East Coast
T: +1 814 238 2365
M: +1 814 753 0000
E: [email protected]
JAPAN
T: +81 90 1843 7628
E: [email protected]
EMEA
T: +33 6 2483 0742
E: [email protected]
Skype: michel-rudelle
ASIA
T: +1 503 968 3000
F: +1 503 389 7921
E: [email protected]
CHINA
T: +86 10 8795 5211
M: +86 1391 093 0624
E: [email protected]
LATAM
T: +1 503 968 3000
F: +1 503 389 7921
E: [email protected]
About Apantac LLC
Apantac is a leading designer and developer of high quality and cost effective multiviewers, video walls,
matrices, extenders, and signal processing equipment. The Apantac product line has been specifically
designed to provide users with flexible and innovative technology solutions for the broadcast and ProAV
industries.
The Apantac product line includes; Multiviewers, video walls, extenders, switches, splitters, matrices, fiber
optic extenders, HDBaseT solutions, as well as various video processors. These products are sold globally
through direct selling channels, a growing network of dealers, system integrators, OEM’s and various other
partners.
Apantac was founded in 2008 and is a privately held company with its headquarters located in Portland,
Oregon, USA.
For more information about Apantac’s products & services please visit: www.apantac.com.
Find us on:
76
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement