null  null
Accessories
Electrical Accessories
ELECTRICAL ACCESSORIES
ELECTRICAL ACCESSORIES
Product
Features
P1004-XX-(X)
Versa-Pot
PART NUMBER
WITH WIRE LEADS
VALUE
P1004-199
50kΩ
P1004-174
100KΩ
P1004-175
200KΩ
P1004-95
P1004-95-X
P1004-17
P1004-16
100kΩ
500kΩ
P1004-16-X
1MΩ
P1004-15
1.5MΩ
P1004-14
2MΩ
P1004-12
P1004-12-X
P1004-13
3MΩ
Panel mountable, industrial potentiometer
recommended for remote time delay adjustment.
The shaft is slotted for screwdriver adjustment and
serrated for slip-proof finger adjustment. Accepts
Versa-Knob or Lock Shaft. May be ordered with
two 8 in. (20.3 cm) wires soldered to pot
(clockwise increase) and female quick connect
terminals on other ends by adding suffix -X to end of
part number.
Specifications
Rating
Taper
Shaft Rotation
Tolerance
0.25W at 55°C
Linear
300° ±5°
±10%
5MΩ
P0700-7
Versa-Knob
P0700-8
Lock Shaft
P1004-9
P1004-10
P1004-31
Mini-Pot
PART NUMBER
VALUE
P1004-9
500kΩ
P1004-10
1MΩ
P1004-31
3MΩ
P0700-21
Mini-Knob
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/relayaccessories
Accessory For
P1004-95 & P1004-95-X:
Consult individual datasheet for
compatibility
P1004-174 & P1004-175:
PHS Series
P1004-16 & P1004-16-X:
Series:ERDMERDI ERD3 TRB TRM
TRS TS1TS6
P1004-15, P1004-14, P1004-13, P1004-12,
& P1004-12-X:
Series: ORB ORM ORS TAC1 THD7 TRB TRM TRS TS1 TS2
TS4 TS6 TSD7TSU2000
Versa-Knob is designed for 0.25 in (6.35 mm) shaft
of Versa-Pot. Semi-gloss industrial black finish.
P1004-XX-(X)
Fits 0.25 in. (6.35 mm) potentiometer shafts. Locks
by tightening nut onto four tapered/slotted fingers.
Pressure on the shaft locks control against
mis-adjustment. Nickel plated brass finish.
P1004-XX-(X)
A high quality, industrial potentiometer for remote
time delay adjustment. The shaft extends through
the timer’s center hole for easy panel mounting. Use
mini-mount bracket for standup mounting of timer.
Adjustment by screwdriver or mini-knob. May be
ordered with two 3 in. (7.6 cm) wires soldered to
pot (clockwise increase) and female quick connect
terminals on other ends by adding suffix -X to end of
part number.
Specifications
Rating
Taper
Shaft Rotation
Tolerance
Series: TAC1
TS1
TS2
TS4
TS6
TSD7 TSU2000
0.25W at 55°C
Linear
300° ±5°
±10%
Versa-Knob is designed for 0.25 in (6.35 mm) shaft
of Versa-Pot. Semi-gloss industrial black finish.
P1004-XX-(X)
Rev: 1-A-062916
Accessories
Electrical Accessories
ELECTRICAL ACCESSORIES
ELECTRICAL ACCESSORIES
Product
Features
P0200-19
Heat Sink Compound
2 grams
P0200-20
Heat Sink Compound
100 grams
P1015-18
Quick Connect
Screw Adaptor
P1015-13
P1015-64
P1015-14
Female Quick
Connect Terminals
Accessory For
Single package/container of heat sink compound
consisting of primarily zinc oxide and having a 12
month shelf life (EOD date on the label). P0200-19
mounts one high current, plated 2 x 2 in. (50.8 x
50.8 mm) timer or flasher. P0200-20 mounts
50+ units.
Any 2 x 2 in. (50.8 x 50.8 mm) plated timer
or flasher.
Screw adaptor terminal designed for use with all
modules with 0.25 in. (6.35 mm) male quick
connect terminals. Screw terminal accepts ring
or spade terminals.
Modules with 0.25 in. (6.35 mm)
male quick connect terminals.
Consult the individual datasheet to
determine compatibility.
These 0.25 in. (6.35 mm) female terminals are
constructed with an insulator barrel to provide
strain relief.
Consult individual datasheet to
determine compatibility.
Dials for use with remote Versa-Pot and panel
mounted Mini-Pot. Reverse screen printed on clear
plastic to avoid damage to printed image.
P1004-9 P1004-10P1004-12
P1004-13P1004-16P1004-31
P1004-95
P0400
Time Adjustment Dials
PART NUMBER
RANGE
INCREMENTS
P0400-12
0.05 - 1s
0.1s
P0400-86
0.1 - 10m
1m
P0400-82
0.1 - 10s
1s
P0400-17
1 - 30s
5s
P0400-83
1 - 60s
10s
P0400-27
0 - 10
MRD*
*Multiplier Reference Dial
VTPXX
The VTP Series mounts on modules with in-line
adjustment terminals. Rated at 0.25W at 55°C.
Available in resistance values from 5K Ω to 5MΩ
VTP
PART NUMBER
RT VALUE
RANGE
PART NUMBER
RT VALUE
RANGE
VTP0E
250kΩ
0.5 - 20s
VTP3L
2MΩ
0.1 - 4m
VTP1B
0.5MΩ
0.05 - 3s
VTP4B
3MΩ
0.05 - 3s
VTP1C
0.5MΩ
0.1 - 10s
VTP4F
3MΩ
0.5 - 60s
VTP1D
0.5MΩ
0.5 - 10s
VTP4J
3MΩ
2 - 180s
VTP2A
1MΩ
0.05 - 1s
VTP4P
3MΩ
1 - 100m
VTP2C
1MΩ
0.1 - 10s
VTP5G
5MΩ
1 - 100s
VTP2E
1MΩ
0.5 - 20s
VTP5K
5MΩ
10 - 1000s
VTP2F
1MΩ
0.5 - 60s
VTP5N
5MΩ
0.1 - 10m
VTP2J
1MΩ
2 - 180s
VTP5P
5MΩ
1 - 100m
VTP2P
1MΩ
1 - 100m
VTPDF
50KΩ
0.5 - 60s
VTP3B
2MΩ
0.05 - 3s
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/relayaccessories
Series:TAC1 THD7 THDM TS1
TS2 TS4
TS6 TSD7
Rev: 1-A-062916
Accessories
Electrical Accessories
ELECTRICAL ACCESSORIES
ELECTRICAL ACCESSORIES
Product
Features
LPSM003ZXID
Indicating Fuse Holder
LPSM003Z
Accessory For
Littelfuse POWR-SAFE Dead Front holders provide
optimum protection to personnel for Class CC and
Midget-Style fuses. 600 VAC/DC
Series:DLMUHLMUPLM
PLMUPLR PLS
TVM TVWWVM
10 x 38 fast acting, high-interrupting capacity,
current-limiting type fuse. 600 VAC/500 VDC
FH3P
Non-indicating Fuse Holder
0KLK002.T
Midget Fuse (2 Amp)
LPSM003ZXID LPSM003Z
The VRM6048 accessory module allows the voltage
monitor to monitor a 3-phase 550 to 600VAC Line.
VRM6048
Voltage Monitor
Accessory Module
575VAC
VRM Module
→
460VAC
Voltage Monitor
Adjustment
If the measured line voltage is 575VAC, connect as shown and adjust/select the voltage monitor for 460VAC operation.
Package
Molded housing with
encapsulated circuitry
Mounting
Surface mount with one #10
(M5 x 0.8) plastic screw. May
be DIN Rail mounted using P1023-20 Adaptor.
Termination
Screw terminals with captive
wire clamps for up to No.12 AWG wire.
Operating
-40° to 70°C
Storage
-40° to 85°C
Humidity
95% relative, non-condensing
VoltageInput Output*
600VAC
480VAC 575VAC
460VAC 550VAC
440VAC
Series:
PLM PLR
PLS
TVM TVW
(manufactured after December 2003)
*The VRM6048 must be connected as shown. If the voltage
monitor is disconnected, the VRM output voltage equals the
input voltage.
The V150LA10AP, a transient voltage surge
suppressor, is a radial leaded varistors (MOVs) that
is designed to be operated continuously across AC
power lines. This UL recognized varistor requires
very little mounting space.
V150LA10AP
LA Varistor
MAX. OPERATING VOLTAGE
PRODUCT
V150LA10AP
AC (V)
DC (V)
150
200
© 2016 Littelfuse Protection Relays & Controls
www.littelfuse.com/relayaccessories
MAX IMPULSE
CURRENT 80.20 μs
CURRENT WAVE
VARISTOR VOLTAGE AT
1MA DC TEST CURRENT
Any of our products that operate below
150 VAC or 200 VDC.
PEAK CLAMPING VOLTAGE
WITH 80.20 μs WAVE
(A)
MIN. (V)
MAX. (V)
VC (V)
1PK (A)
4500
216
264
395
50
CAPACITANCE
DISC
DIAMETER
SIZE (MM)
800
14
Rev: 1-A-062916
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement