Gregg Catalogue Page R048

Gregg Catalogue Page R048
GROTE
GRO/2426/2429
Trailer Connectors
ULTRA-PIN RECEPTACLE
NOSE BOX
•Extra heavy bases •Slanted barrel
for drainage •Floating pins •High
impact retainer plate •Die-cast zinc
•4 hole mount •Solid pin
Part No. 87590EA.
ULTRA NOSE BOX
•Replaceable 7-pin insert for easy
maintenance •39-pin connections
eliminates overcrowding of wires •Hinged
door keeps elements out, while providing
easy access •Insert molded pins helps
prevent accidental disconnects •Nylon
Part No. 87141EA, Solid pin.
SEVEN TERMINAL JUNCTION
BOX
•Corrosion resistant molded cover and
housing •Entrance slots •Two-bolt
mounting 7-3/8” to centre •Access slot
grommets included, four open, four
closed •Seven #10-32 studs
Part No. 82-1000EA.
DRI-SEAL CIRCUIT BOX
•Entrances stay dry by using the new push-in choke seals and
threaded fittings - comes with 4 choke seals •18 brass circuit
studs and full hardware •Entry
from 4 sides •All components
are corrosion resistant
•Numbered label for fast circuit
I.D. •Ample area for wire and
cable - 1 cable entrance fitting
Part No. 351044EA.
TWIST-IN & LOCK
CONNECTOR
•Easy twist-in and lock nylon assembly
for factory installed brackets and hitches
•Fits GM and Nissan trucks and SUVs
Part No. 82-1059EA.
COMBINATION 7 WAY & 4 POLE SOCKETS
•Combines an R.V. 7 way and 4 pole flat socket connection into
one part (not to be used simultaneously) •Made of lightweight,
high impact nylon material for superior corrosion resistance •Easy
snap-in assembly designed for truck and sport utility vehicles and
when hauling multiple trailers •Eliminates the need for an adapter
•Will plug into any Ford or GM vehicle built after
2001 (selected Nissan models 2004+)
•Mounting bracket included
Part No. 82-1055EA.
COLE HERSEE
COL/1910
Automotive & Heavy Duty Electrical Products
Trailer Connectors
6 & 4 POLE SOCKETS & PLUGS
SOCKETS: •Die-cast metal housing •Screw terminals, accept up to #12 gauge wire •Brass contacts aligned to assure proper contact and minimum voltage drop •Wiring codes identified on
insulator •Replaceable interior •Spring loaded socket door, plug locks into opening securely PLUGS: •Die-cast metal housing •Screw terminals, accept up to #12 gauge wire •Contacts float for
best alignment and connection •Replaceable interior
Part No.
1258
1235
1257
1232
1254
1236
1253
1233
Description
6 pole socket - exposed terminal screws, split contact pins, 17/64” dia. x 2-15/16” on centers flange holes, mounting
through 1-3/8” dia. hole
6 pole socket - same as #1258 except with special housing design to protect connections from road splash, dirt, etc.
4 pole socket - exposed terminal screws, split contact pins, 17/64” dia. x 2-15/16” on centers flange holes, mounting
through 1-3/8” dia. hole
4 pole socket - same as #1257 except with special housing design to protect connections from road splash, dirt, etc.
6 pole plug w/ cable protector - holds all size cables firmly in place, plated steel cable protector provides strain relief
and abrasion protection
6 pole plug - same as #1254 except without cable protector
4 pole plug w/ cable protector - holds all size cables firmly in place, plated steel cable protector provides strain relief
and abrasion protection
4 pole plug - same as #1253 except without cable protector
1254
1258
1253
7 POLE PLUGS WITH SPRING-GRIP ELECTRICAL CONTACTS
•Unique brass female contact with self adjusting spring band insures uniform contact with socket pin •Greater contact area for increased electrical efficiency •Coupling and uncoupling are easier
•Creates a wiping action that eliminates dirt, dust, etc. •Competitive contacts will spread after repeated use, limiting the contact area and reducing current flow. The distorted contact allows dirt,
dust, etc. to build up, further increasing voltage loss •Die-cast metal housing •Ground terminal accepts up to #8 gauge wire, other terminals up to #10 gauge wire •Replaceable interior •Wiring
codes identified on insulator
Part No.
1255
1222
Description
Plug with cable protector - holds all size cables firmly in place, plated
steel cable protector provides strain relief and abrasion protection
Plug - same as #1255 except without cable protector
7 POLE PLUGS FEATURING SPRING-CLIP QUICK RELEASE PLUG INTERIORS
•Screw, ground terminal accepts up to #8 gauge wire, other terminals up to #10 gauge wire •Replaceable interior •Floating contacts for best alignment and connection
Part No.
12092
12082
Description
Plug with cable protector (die-cast metal housing) - holds all size cables firmly in
place, plated steel cable protector provides strain relief and abrasion protection
Plug with cable protector (glass filled plastic housing) - holds all size cables firmly
in place, plated steel cable protector provides strain relief and abrasion protection
7 POLE CONNECTORS FOR ISO APPLICATIONS
•Replacement 7 pole connectors per ISO 3731-1980 (E): Road vehicles - electrical connections between towing vehicles and trailers with 24V electrical
equipment. Type 24S (supplementary) •Die-cast metal housing •Six spring-grip female contacts and one solid male contact pin
Part No.
Description
Polarized ground terminal for correct mating- insulated circuit contacts (not self grounding). One
12077-01 “spring grip” female contact and six solid male contact pins. Spring loaded cover protects contacts from
weather, dirt, etc. Flange holes 21/64” diameter, 2-15/16” on centers. Mounts through 2” diameter hole.
7 POLE SOCKETS
Conform to A.T.A., R.C.C.C. (RP-102), SAE (J560b) and FMVSS-121, FIEI T.T.M.A. (RP#40-73) standards or recommendations
•Ground terminal accepts up to #8 gauge wire, other terminals up to #10 gauge wire •Brass contacts, aligned to assure proper contact and minimum voltage drop •Wiring codes embossed on
insulator •Spring loaded socket door cover, fits over mating ridge on socket face for weather and dirt protection •Screw terminal •Flange holes: oval .488” x .328”, 2.93” on centres •Mounting
through 2” dia. hole
Part No.
Description
12063
Socket (solid brass contact pins) - self grounding, die-cast metal housing
12063-01 Socket (split brass contact pins) - self grounding, die-cast metal housing.
12080
Socket (solid brass contact pins) - insulated circuit contacts, glass filled plastic housing.
12080
12063
Socket - Colour fast green glass-filled plastic housing insures quick identification. Spring
12080-11 loaded
door is marked “Trailer ABS” to further lessen any chance of misconnection.
R48
An All-Canadian Supplier!
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement