ALL PRODUCTS BROCHURE

ALL PRODUCTS BROCHURE
MADE IN THE USA
Ball Valves
Butterfly Valves
Automation Products
Pipeline Strainers
Backflow Preventers
Plumbing and Heating Products
Safety Relief Valves
ALL PRODUCTS BROCHURE
All Products Brochure
A History Of
Service And
Innovation
Now in its eighth decade, Conbraco Industries, Inc. is a leading manufacturer of flow control
products for U.S. and international markets. The company is based in Matthews, NC.
Conbraco has a history of new product development and innovation that dates back to the
company’s inception in 1928. Today, the Conbraco line of products includes ball valves;
butterfly valves; backflow prevention devices; ground key cocks for gas, air, gasoline, steam
and water; safety relief valves; water gauges; pipeline strainers; vacuum breakers; valve
actuators and more.
Conbraco’s vertically integrated manufacturing ensures a consistency of production, testing,
quality and availability. It’s your assurance that Conbraco flow control products will deliver longterm performance advantages. All Conbraco plants are registered to ISO 9001 quality standards.
The Conbraco line continues to expand — with new products, designs and advanced materials
— to better serve the needs of our customers in chemical processing, pulp and paper,
petroleum, residential and commercial plumbing and heating, manufacturing and other markets.
Air And Gas Cocks
5-6
Automation Products
14-15
Backflow Preventers
9-10
Ball Valves
Butterfly Valves
11-13
15
Check Valves
8
Expansion Tanks
7
Pipeline Strainers
15
Mixing Valves
6-7
Safety And Relief Valves
3-4
Top Entry Ball Valves
13-14
Vacuum Breakers
8
Water Gauges
5
Water Pressure
Reducing Valves
8
Y Strainers
9
2
PAGELAND
BRONZE FOUNDRY AND
MANUFACTURING PLANT
CONWAY
STEEL FOUNDRY AND
MANUFACTURING PLANT
PAGELAND
FINAL ASSEMBLY
(DISTRIBUTION CENTER)
MATTHEWS
HEADQUARTERS
Customer Service 1-704-841-6000
All Products Brochure
Safety And
Relief Valves
For Steam,
Air And Gas
10-100, 10-200, 10-300, 10-400
14-200 SERIES
Brass/bronze safety relief valves protect ASME
Section IV hot water heating boilers and
hydronic heating systems.
High-capacity design
features corrosionresistant construction.
Brass, satin or polished
chrome finishes available.
Set pressures 20 to 60
psig @ 250°F. Sizes 3/4"
and 1", male and female
inlet connections.
High-capacity safety valves for ASME Section
IV low pressure steam heating boilers. One
piece cast bronze body
features top guided
design, chrome-plated
seat and PTFE-faced
soft seat. Optional test
gag available permits
hydrostatic testing. Set
pressures 5 to 15 psig @
250°F. Sizes 2", 2-1/2"
and 3".
10-512/10-322
14-400 SERIES
16 SERIES
High-volume air relief valves designed for low
pressure non-code air and gas service. Rugged
bronze construction
features elastomer soft
seating and Teflon® coated
discs for dependable
operation. Used to protect
low pressure compressors
and tanks, high-volume
blowers, and pneumatic
conveying systems.
Pressure settings from 4
to 22 psig @ 400°F. Sizes
2", 2-1/2" and 3".
Economical relief valves for general purpose noncode overpressure protection and bypass relief
applications. Applications include liquid bypass or
thermal expansion relief of
well pumps, tanks, fire
protection systems and all
types of water or liquid piping
systems. Not intended for
steam service. pressure
settings. Bronze bodies,
stainless steel springs and
soft seating. Standard
pressure settings from 50175 psi. Sizes 1/2" and 3/4".
10-600
14-600 SERIES
16-503, 16-504 SERIES
Heavy-duty bronze safety relief valves protect
ASME Section IV hot water heating boilers and
hydronic heating systems.
High-capacity design
features corrosion-resistant
construction, isolating
diaphragm and elastomer
soft seats. Set pressures
15 to 160 psig @ 250°F.
Available with standard or
expanded outlet, sizes 3/4"
through 2".
High-volume vacuum relief valves feature one
piece cast bronze bodies, Teflon® coated
discs and elastomer soft
seating to provide
accurate and dependable
operation. Relief settings
from 8 to 30" Hg @
400°F. Sizes 2", 2-1/2"
and 3".
Calibrated pressure relief valve allows for in-line
pressure adjustments without the need for
pressure gauge. Provides
static overpressure
protection for liquid filled
systems such as well
pumps, tanks, fire
protection systems. Preset
at 100 psig. Adjustable in
25 psig increments from
50 to 175 psig. Bronze
body. Inlet sizes 1/2" to
3/4". Outlet Size: 1/2".
12 SERIES
15 SERIES
16-501 SERIES
Medium capacity safety valves protect ASME
Section IV low pressure steam heating boilers.
Cast bronze, full nozzle
design features PTFE
faced elastomer soft
seating for dependable
operation. Set pressures
5 to 15 psig @ 250°F.
Sizes 2", 2-1/2" and 3".
OEM-style brass barstock safety valves for air
and gas service. ASME Section VIII certified.
Used to protect air
compressors, receivers,
and instrument air
systems. Stainless steel
springs and elastomer soft
seating provide superior
seat tightness and
vibration resistance. Set
pressures to 250 psig
@ 325°F. Sizes 1/4", 3/8",
1/2", 3/4" and 1".
Adjustable relief valves protect equipment by
providing low volume liquid relief or bypass
control. Excess volume
may be discharged back
to the low pressure
source. Ideal for
agricultural sprayers and
simple commercial or
industrial pressurized
systems. 125 psig
standard set pressure;
adjustable by-pass relief
valve available.
Size 1/2".
Compact ASME Section VIII steam service
safety valves feature stainless steel springs
and elastomer soft
seating for dependable
operation. Standard
equipment on steam
sterilizers, cookers and
kettles. Brass, satin or
polished chrome finishes.
1/2" model available with
stainless steel wetted
trim. Set pressures to 60
psig @ 312°F. Sizes 1/2"
and 3/4".
www.conbraco.com
3
All Products Brochure
Safety And
Relief Valves
For Steam,
Air And Gas
4
29 SERIES
510/520 SERIES
Compact OEM-style bronze safety valves for
steam, air/gas service. ASME Section I and VIII
certified for use on steam
boilers, sterilizers, pressure
vessels and cookers. Standard
features include stainless steel
springs, tapped drain
connections and patented
Teflon® soft seat for superior
seat tightness. Optional
stainless steel wetted trim. Set
pressures to 200 psig @ 406°F.
Sizes 3/8" through 1-1/4".
High-performance bronze safety relief valves are
ASME Section VIII certified for steam, air/gas and
liquid service. Rugged top-guided
full nozzle design features flat
lapped metal seating, self
aligning disc insert and a lower
control ring for exceptional
performance and durability.
Available with choice of brass or
stainless steel trim. Wide range of
options includes elastomer
O-ring or PCTFE soft seating and
cryogenic preparation. Set
pressures to 900 psig @ 422°F.
Sizes 1/2" through 2".
17 SERIES
119 SERIES
Bronze pressure only relief valves protect
plumbing systems, storage tanks and tankless
coil water heaters from
excessive pressure. CSA
certified design conforms to
HUD/FHA requirements. 3/4"
model is ASME Section IV
certified from 75 - 150 psig.
Stainless steel springs and
elastomer soft seats are
standard. Set pressures to
160 psig @ 250°F. Sizes
1/2" and 3/4".
High-capacity cast iron flanged safety valves for
steam, air/gas service. ASME Section I and VIII
certified. Used to protect steam
boilers, pressure vessels and
pressure piping systems.
Rugged top-guided design
features flat lapped metal
seating and two ring control for
repeatable performance and
extended service life. Stainless
steel wetted trim standard. Set
pressures to 250 psig @
450°F. Sizes 1-1/2" through 6".
High-performance industrial safety relief valves feature
carbon steel or all stainless steel construction. ASME
Section VIII certified for steam,
air/gas and liquid service. Rugged
top-guided full nozzle design features
flat lapped metal seating, self aligning
disc insert and a lower control ring for
exceptional performance and
durability. Wide range of options
includes elastomer O-ring or PCTFE
soft seating and cryogenic
preparation. Set pressures to 900
psig @ 800°F. Sizes 1/2" through 2".
18C-400 SERIES
MODEL DPL
35 SERIES
Residential T & P relief valves protect hot water
heaters from excessive pressure
and temperatures. CSA certified
design conforms to HUD/FHA
requirements. 3/4" model is
ASME Section IV certified at 125
and 150 psig settings. Choice of
element lengths. Available with
extended body length to suit
water heaters with extra thick
insulation. Set pressures to
175 psig @ 210°F. Sizes 1/2"
and 3/4".
Cast iron drip pan elbows connect to the
discharge outlet of steam service safety
valves to safely direct the
steam discharge and
condensate away from the
valve. Isolates the valve
from piping stresses which
can adversely affect valve
performance. Sizes 3/4"
through 8", threaded and
flanged connections.
Bronze feed water pressure regulators;
individually set at 15 psig; adjusts from 10
to 25 psig; high-capacity;
screw in bonnet; in-line
stainless steel strainer;
210°F max. temperature;
max. pressure: 100 psig;
1/2" union threaded,
threaded and solder
connections.
18-500 SERIES
19 SERIES
37 SERIES
High-capacity commercial T & P relief valves
protect hot water heaters from excessive
pressure and temperatures.
CSA certified design conforms
to ASME Section IV and
ANSI Z21.22 requirements.
Corrosion-resistant all-bronze
body, isolating diaphragm and
screw-in cage that eliminates
rusting steel screws. Stainless
steel springs and thermostats.
Choice of element lengths.
Set pressures to 150 psig @
210°F. Sizes 3/4" through 2".
Bronze high-capacity safety valves for steam,
air/gas service. ASME Section I and VIII
certified. Protects steam boilers,
pressure vessels and pressure
piping systems. Standard
features include stainless
steel springs, tapped drain
connections and Teflon® soft
seat for superior performance.
Metal to metal seating and
stainless steel trim options
available. Set pressures to
300 psig @ 422°F. Sizes 1/2"
through 2-1/2".
Brass or bronze vacuum relief valves; max.
temperature: 250°F; Max. water pressure:
200 psig. CSA certified.
Sizes: 1/2" and 3/4".
Customer Service 1-704-841-6000
530 SERIES/540 SERIES
All Products Brochure
Water Gauges
20 SERIES
24 SERIES
Rough bronze water gauges;
aluminum or composition
wheel; needle drain valve in
lower arm; ball checks
(optional) prevent operator
scalding in case of glass
breakage: chain lever and
expansion tank models
available. Sizes: 3/8", 1/2"
and 3/4".
21 SERIES
Rough bronze direct reading
water gauges; ASME
automatic or non-automatic
models available; also
available with chain lever;
ball valve drain. Sizes: 1/2"
and 3/4".
Water Gauges,
Boiler Drains,
Air And
Gas Cocks
25 SERIES
Rough bronze water gauges
with extended shank; 1-3/4"
shank length; aluminum or
composition handle. For 1/2"
pipe size.
Polished bronze and chrome
plated water gauges;
aluminum or composition
wheel; needle drain valve
in lower arm; non-automatic
and automatic models; chain
lever available. Sizes: 3/8"
to 3/4".
Air And
Gas Cocks
23 SERIES
41 SERIES
Polished and satin brass air cocks; with
“tee” handle or lever handle; spring and
nut bottom with
wide range of
connections available.
Stainless steel direct reading
water gauges; max. working
pressure: 500 psig (subject to
limitation of gauge glass);
aluminum or composition
wheel; non-automatic,
automatic, ASME automatic
and expansion tank models.
Sizes: 1/2" and 3/4".
Boiler Drains
94 MBV SERIES:
31 SERIES
Rough bronze drain valves
for water heaters or heating
boilers; pressure
rated over 100
psig. Shank lengths
5/8" to 3-1/2". Pipe
sizes: 1/2" and
3/4".
www.conbraco.com
Mini Ball Valve. Competitive, conventional
port valves, constructed of heavy-duty forged
brass, with 100% Teflon®
seats and gland follower
with double Viton o-rings
to prevent stem leakage.
Reversible handle for tight
space applications. Meets
ANSI B1.20.1. Rated to
600 psig at 100°F.
Operating temperatures
from -40°F to 300°F.
Sizes 1/8" and 1/4".
5
All Products Brochure
Air And
Gas Cocks,
Mixing Valves
Mixing Valves
GB-15, GB-16 SERIES
These gas appliance ball valves are
designed for natural gas, manufactured
and mixed gas,
liquefied petroleum
gases and LP
gas-air mixture
applications. They
comply with the
latest editions
of ANSI, CSA, and
UL published
standards.
54 SERIES
GB-10 SERIES
Gas hose-end shut-off valves; 1/8'' NPT
or standard tube sizes; capacity: 56,500
Btu/hour. Pipe
sizes: 3/8"
to 3/4".
CSA design-certified manual shut-off
ball valves for many fuel types; for up
to 5 psig. Capacities:
300,000 to 1.1 million
Btu/hour. Standard
female x female threaded
connection. Sizes: 3/8"
to 1".
56 SERIES
GB-50 SERIES
Pilot gas cocks; 1/2 psig for 32°F to 125°F
service; CSA design certified.
1/8" MNPT x
various 1/4" tube
connections.
UL and CSA design-certified manual
shut-off ball valves for many fuel types;
for up to 5 psig.
Standard female
x female threaded
connection.
Sizes: 1/2" to 2".
6
Customer Service 1-704-841-6000
34A-34H SERIES
Thermostatic Mixing Valves. 34A Series ASSE
1017 certified mixing valves are designed for hot
water distribution systems; 34H Series are designed
for radiant heat applications, to provide better control
of hot water supply. Numbered indicator control
allows easy setup and fingertip control. Available in
low or high temperature range options depending on
application. Integrated check provides added
protection of thermostat
and cross connection
control.
34B SERIES
Scald Protection Mixing Valves. 34B Series ASSE
1016 certified mixing valves are designed to be used for
individual fixtures for flow
as high as 11 GPM. These
valves use a thermostatic
element that senses outlet
temperature and will
compensate for fluctuating
inlet temperature and
pressure. The mixed water
temperature range is 85°120°F and will hold a
desired temperature within
+/-3°F at all times. The
34B also has an
adjustable temperature
limit stop to prevent the
valve from being set
above 120°F.
All Products Brochure
Specialty Valves
35-FC SERIES
34C SERIES
Commercial High-Capacity Mixing Valves.
34C Series ASSE 1017 listed, high-capacity
mixing valves are
thermostatically
controlled regulating
valves designed for use
in large commercial
potable and non-potable
hot water systems.
Simple adjustment of
water temperature from
90°-140°F or 130°-180°F.
Specialty Valves,
Expansion Tanks
Bronze Body flow check provides positive gravity
shut-off in hydronic systems. Convenient override
permits continuous
circulation or drainage when
required. Available with NPT
or sweat connections, NPT
models are both angle and
horizontal checks. Expansion
tank may be installed on the
angle check. Maximum
temperature is 250˚F.
Max. pressure is 125 psig.
APOLLO® PBS SERIES
34D SERIES
“Point of Use” Mini-Mixer Thermostatic
Valves. 34D ASSE 1016 certified mixing
valves are designed to
throttle both the hot and
cold water inlet supplies
to compensate for
temperature and pressure
fluctuations. The mixed
water temperature range
is 85°-120°F and will hold
a desired temperature
within +/- 2°F at all times.
The 34D has built in
thermal actuator protection
and an adjustable
temperature limit stop to
prevent the valve from
exceeding 120°F.
Purge, balance and shut-off valve; has solid
brass “can’t lose” plug and chain; hose
thread connection
for blow off and easy
purging; maximum
temperature: 250°F;
maximum pressure:
50 psig.
Expansion Tanks
58 SERIES
16-XT SERIES
Balancing valves for hydronic flow control;
150 psig rating. Copper tube sizes: 1/2"
and 3/4".
Expansion tanks for hydronic water
heating. Rugged steel construction,
flexible diaphragm. Pre-charge pressure:
12 psig; charge
pressure: 30 psig;
max. pressure: 150
psig; max.
temperature: 210˚F.
78-RV SERIES
40-XT SERIES
Water heater shutoff/thermal expansion
control valves provide both water heater
shutoff and thermal
expansion protection.
The 78-RV
combination valves
are offered in three
pressure settings,
125, 100 and 80
psig. Available in 3/4"
and 1" sizes with
sweat and threaded
connections.
Potable water expansion tanks for directfired hot water heaters and supply tanks
(gas, oil and electric).
Easy in-line
installation; fieldadjustable precharge pressure.
Supply pressures
from 40 to 120 psig;
for system volumes
up to 120 gallons.
34HL SERIES
Multiple-Fixture Mixing
Valve. Fully ASSE 1069
compliant, the 34HL Series
protects against scalding and
thermal shock by providing
±5° output temperature
control for multiple fixtures in
commercial and institutional
settings. Patented design
eliminates “dead-zones.
Complete assembly, no
external components.
100% U.S.-made.
www.conbraco.com
7
All Products Brochure
Pressure
Reducing Valves,
Vacuum Breakers,
Check Valves
Water Pressure
Reducing Valves
36 SERIES
61, 62 SERIES
All bronze construction. Supply pressures to 300
psig; standard outlet range 25 to 75 psig; other
pressures available. Max.
working temperature of 180°F.
Bronze body; replaceable
cartridge; built in by-pass;
high-capacity stainless steel
strainer. Many end connection
options, union pipe end
standard. Meets ASSE, CSA
and ANSI standards and is
listed with IAPMO. Sizes:
1/2" to 2".
Ball cone check valves in bronze (to 3") and
316 stainless steel (to 2"). Reinforced ball
cone check provides excellent chemical and
corrosion resistance and
requires no radial
alignment. Standard
connection for bronze is
FNPT (to 3"), Male x
Female (to 2"). For
stainless steel,
FNPT only.
38-100 SERIES
36C SERIES
61-500/62-500 SERIES
Economical, lightweight and compact
protection against back-siphonage and low
hazard cross connections.
Meets ASSE and CSA
standards; listed with IAMPO.
For hot and cold water service
up to 212°F at 125 psig for 1";
and up to 180°F at 125 psig for
1/4"-2".
Compact and corrosion-resistant. Supply
pressures up to 400 psig; built-in by-pass halts
excessive pressure buildup.
Working temperatures to
180°F; 50 psig standard
factory setting; easy screw
adjustment. Meets ASSE,
CSA and ANSI standards and
is listed with IAPMO. FNPT,
sweat union, PEX union or
FNPT union connections
available. Sizes: 1/2" to 1".
Bronze check valves with standard EPR or
optional Nitrile seat for bubble-tight shut off to
2". Stainless steel check
valves with fluorocarbon
seat to 1". Optional 5 and
10 psig cracking pressure
through size 1". Standard
connection for bronze is
FNPT, bronze sweat
connection available to
1", for stainless steel
FNPT only.
38-502 SERIES
36H SERIES
61-700 SERIES
Potable water backflow protection for lab
faucets, community sinks, beauty salons,
barber shops. ASSE, CSA
approved; IAPMO listed.
Brass body, polished
chrome plating, stainless
steel internal parts. 3/8"
FNPT standard; 1/4"
optional. Adapters
simplify installation.
Super-capacity pressure reducing valves
for heavy-duty applications. Complies with
ASSE and CSA standards
and is listed with IAPMO.
Bottom clean-out plug for
easy in-line servicing; NPT
connection standard. Flanged
connections available on 2",
2-1/2" and 3" sizes. Strainers
optional. Sizes: 1/2" to 3".
Ideally suited for all OEM applications
where space is a premium. Excellent for
use on water and
air. They feature a
bubble-tight soft seat
design with a very
light loaded stainless
steel spring.
Vacuum
Breakers
8
Check Valves
Customer Service 1-704-841-6000
All Products Brochure
Backflow
Preventers And
Accessories
4D-100 SERIES
Y Strainers
Y Strainers,
Backflow
Preventers And
Accessories
The Defender double check valve gives you short lay
length, low head loss and the durability of stainless
steel in a totally lead-free assembly. Get big
protection in a small package against lead and
unwanted backflow with the Apollo Defender.
Maximum working
pressure to175 psig;
operating temperatures
from 33-140°F.
Sizes 2-1/2" to 10".
59 SERIES
4D-200 SERIES
Cast bronze body with 304 stainless steel
screen; 400 psig rating; wide variety of
mesh screens
available; optional
blow-out plug tapping.
Sizes: 1/8" to 4".
Defender reduced pressure principle backflow
preventers provide lead-free protection against
back-pressure or back-siphonage in a minimum
space. Patented
stainless steel
modular checks help
reduce lay length and
simplify maintenance.
Maximum working
pressure 175 psig;
operating
temperatures from
33 to 140˚F. Sizes
2-1/2" to 10".
59-300 SERIES
Compact corrosion-resistant bronze sweat
end Y-strainers with stainless steel screens.
Minimal wall
thickness assures
high-strength solder
joints; pressures
to 400 psig.
Sizes: 1/2" to 2".
59-V SERIES
Ideal for OEM applications where space is
a premium. Corrosion-resistant body and
cleanout cap with
standard 50 mesh
stainless steel screen.
Other screen sizes
available. Rated 400
psig at 210°F WOG
and 125 psig at 400°F
WSP. Sizes: 1/8" and
1/4" NPT.
www.conbraco.com
4S-100 SERIES (MODEL DC)
Easy-handling, low head loss top entry double
check valve assemblies for fire sprinklers and
irrigation systems. Body
and cover: FDA
approved epoxy coated
ductile iron. Meets ASSE
1015, AWWA C-510, and
CSA B64.5; IAPMO
listed, UL Classified and
FM Approved. USCFCCC&HR Approved.
Fast in-line maintenance.
Sizes from 2-1/2" to 10".
4SG-100 SERIES
Double Check Valves in sizes 2 1/2" - 8".
Light-weight, short lay length, low head loss,
with individual access
to the check valves.
FDA-approved epoxycoated ductile iron.
Available shut-offs:
monitored butterfly
valves with supervisory
switch, OS&Y and NRS
gate valves. Grooved
body connections for
ease of installation.
40-100 SERIES
Sizes 1/2" to 2": Bronze body double check
valves with Celcon® poppets and stainless
steel springs. Full
USC-FCCC&HR,
AWWA, ASSE, CSA
approvals; and
IAPMO listed. UL
classified and FM
approved models.
40-200 SERIES
Sizes 1/4" to 2": Bronze body reduced
pressure valves with Celcon® poppets and
stainless steel
springs. USCFCCC&HR,
ASSE, CSA
approved, 3/4"
to 2" are also
AWWA, UL
classified and
IAPMO listed.
40-200 SERIES
Sizes 2-1/2" to 10": Fusion epoxy coated
ductile iron body; 85-5-5-5 replacement seats
and stainless steel
springs. Full USCFCCC&HR,
AWWA, ASSE,
CSA, and FM
approvals and
IAPMO listed.
UL classified.
9
All Products Brochure
Backflow
Preventers And
Accessories
4V-500 SERIES
40-700 SERIES
Pressure vacuum breaker protects
irrigation systems from freeze damage.
Designed with plastic float
and integral relief valve for
freeze resistance; Apollo®
ball valves standard.
Max. working pressure:
150 psig. Full
USC-FCCC&HR, ASSE,
and CSA approvals.
Sizes 1/2" to 2".
Protects against hazardous cross-connections. Detects
unauthorized use of water in fire and sprinkler systems.
Internal sensing
passage. Working
pressures to 175 psig;
operating temperatures:
33˚F to 140˚F. Approved
under ASSE 1047, FM,
UL Classified, USC’s
FCCC&HR. Sizes: 3"
to 10".
40-300 SERIES
4W-500 SERIES
4C-100 SERIES
Bronze dual check valves with Celcon®
poppets and stainless steel springs;
in-line testable and
repairable; wide
range of inlet/outlet
connection
combinations
available. ASSE
and CSA approvals.
Sizes: 1/2" to 1".
Spill-resistant pressure vacuum breaker (SVB) is
designed to prevent contamination of potable water
due to back-siphonage
and is ideally suited for
indoor and OEM
applications supplied
with continuous pressure
where water discharge
could cause problems.
Full USC-FCCC&HR,
ASSE, and CSA
approvals. Sizes: 1/4"
to 1/2" Noryl Body.
ASSE 1022-approved carbonated beverage backflow
preventer. Protects against copper poisoning by
preventing carbonated water
from being drawn into copper
pipes. All wetted components
are non-toxic, corrosion
resistant, and approved
for use with potable water.
Suitable for supply pressures
to 150 psig and water
temperatures from 33˚ to
130˚F. CSA-certified to
NSF61. IAPMO approved.
Sizes 1/4" and 3/8".
4N-300 SERIES
4S-600 SERIES MODEL DCDA)
BACKFLOW TEST KIT
New Apollo® Valve 4N-300 Series dual checks.
Tested and certified ASSE and CSA, designed
especially to meet the
growing needs of water
systems supplying new
suburban residential
communities and
neighborhoods. Sizes
3/8" to 1": Bronze body
valves with Noryl® and
acetal components and
stainless steel springs.
Epoxy coated ductile iron model DCDA. Designed
to provide double check protection against crossconnection of non-potable (non-hazardous) water
into the safe drinking
water system; and at the
same time offers precise
monitoring capability to
detect leakage or
unauthorized use of
water from fire
or automatic sprinkler
systems. Sizes
2-1/2" to 10".
Apollo® three and five-valve test kits are
lightweight and portable. They come equipped
with a gauge,
hoses and all
required fittings
in a protective
molded plastic
case. For DCV,
RPZ, DVB and
SVB backflow
preventers.
40-400 SERIES
4SG-600 SERIES
Bronze body continuous pressure valves
with Noryl® poppets and stainless steel
springs. ASSE and
CSA approvals.
Sizes: 1/2" and 3/4".
Double Check Detector Assembly in sizes 2 1/2" –
8". Light-weight with grooved body connections for
ease of installation in fire or automatic sprinkler
systems. Provides
precise monitoring
capability to detect
leakage or unauthorized
water usage. Available
shut-offs: monitored
butterfly valves with
supervisory switch
and resilient-seated
gate valves.
10
Customer Service 1-704-841-6000
Special Products
And Accessories
Conbraco supplements its standard flow-control
line with a broad selection of specialty products,
including:
• Gauge glass for liquid level gauges
• Guard rods for liquid level gauges
• Replacement parts
• Meter setters
Contact your Conbraco representative for
more information.
All Products Brochure
Standard Ball Valve Ratings
Bronze Valves: 600 psig CWP, Cold, Non-shock.
(Exceptions: 3-way and Saturn valves)
Stainless Steel Valves (76 & 96 Series):
1/4" through 1": 2,000 psig CWP
1-1/4" through 2": 1,500 psig CWP
Carbon Steel Valves (89 and 93 Series):
1/4" through 1": 2,000 psig WOG, 1-1/4" through
2": 1,500 psig WOG Cold, Non-shock
73A Series: 1/4" through 1": 2,000 psig WOG, 11/4" through 2": 1,500 psig WOG Cold, Non-shock
Standard Ball Valve Design Features
• Steel or 304 stainless steel handle with hole
for tagging.
• Blow-out resistant stem.
• Body: Bronze, stainless steel, carbon steel
(barstock, cast or forged), Alloy 20 and nickel.
• Ball: Chrome plated bronze or carbon steel,
stainless steel, Alloy 20 and nickel.
• RPTFE seats and seals, stuffing box ring and
seal washer.
Standard Apollo®
Ball Valves
32 SERIES
Reduced-port economy bronze
solder end ball valve. Blow-outproof stem design. Adjustable
packing gland. 400 psig WOG,
cold non-shock. 125 psig
saturated steam. Vacuum service
to 29" Hg. Sizes: 1/4" to 2".
Available with threaded ends.
Note: Seat material determines practical working
pressures. Pressures referenced are body ratings.
71 SERIES
76 SERIES
76F SERIES
70 SERIES
73A SERIES
77C SERIES
Bronze ball valve with
threaded or solder ends;
chromium-plated ball;
available with latch lock
handle. Sizes: 1/4" through
3". 70-600 Series - Bronze
3-way diversion ball; large
ports; 600 WOG rating; 90°
operation. Sizes: 1/4" - 3".
Forged carbon steel
construction, standard
port design 2,000 WOG to
1". 7,500 WOG 1-1/4" to
2". With actuator
mounting pads and raised
handle stops. NACE
compliant with SS trim.
Sizes 1/4" to 2".
74 SERIES
77W SERIES
Economy stainless steel
full port valve, 1000# CWP
rating. Threaded ends,
blowout proof stem,
investment cast body, 316
SS components, including
stainless handle. RPTFE
seats and long-life MPTFE
packing. Sizes 1/4" to 2".
Stainless steel standard
ball valve; investment cast
components; 2,000 WOG
to 1". 1,000 WOG 1-1/2" to
3"; Sizes: 1/4" to 3". 76-600
Series - Stainless steel
3-way diversion ball valve;
800 psig WOG; investment
cast components.
Bronze ball valve with
mounting pad; deadman
spring return handle
available. Sizes: 1/4"
to 3".
Apollo-Press ball valves are
designed for direct mechanical
connection to copper tubing in
sizes 1/2" - 2". The 77W
complies with ANSI/NSF 61
Section 8 and can be installed
in most plumbing and heating
systems. The press connection
ensures easy installation with
standard crimping tools.
Full-port bronze ball valve
with solid chrome-plated ball
for better flow characteristics.
U.S.-made cast bronze body
and end-cap. NPT and
ANSI B16.18 solder end
connections available.
Sizes 1/4" to 2". 77C-AO
tubular extensions.
76-300/400 SERIES
®
75 SERIES
7K SERIES
Auto Draining; bronze fullport ball valve with 1/4" NPT
tap for drain. Available with
lock-closed-only lever.
Sizes: 1/4" to 2-1/2".
www.conbraco.com
Stainless steel ball valve
with double union ends;
blow-out proof stem; all
wetted metallic parts are
316 stainless steel;
RPTFE seats and seals;
adjustable packing gland;
stainless steel lever and
nut. Sizes: 1/2" to 2".
Chemical resistant nickel
ball valve; blow-out
resistant stem; stainless
steel lever and nut;
precision investment
cast components.
Sizes: 1/2" to 2".
77 SERIES
Bronze padlockable ball
valve; rated 600 psig
WOG; stainless steel
lever and nut optional;
automatic drain available.
Sizes: 1/4" to 2".
Bronze full-port ball
valve with mounting pad;
designed for easy
actuator mounting.
Sizes: 1/4" through 21/2". Available in NPT
and SAE threads.
11
a
s
alve
V
ll
B
Standard
o
Apollo® Ball
Valves
All Products Brochure
Three Piece Ball Valve
82 SERIES
91 SERIES
da
rd
Ap
o
ll
®
Bronze three piece fullport ball valve; rated 600
psig WOG; threaded or
solder ends; in-line
maintenance. Sizes:
1/4" through 4".
Stan
Saturn® bronze one
piece ball valve; rated
400 psig for WOG cold,
non-shock; threaded
and solder ends. Sizes:
1/4" to 2".
83A SERIES
Carbon steel, full-port three piece
ball valve, 1500 psig CWP;
stainless ball and stem, ISO 5211
mounting pad, stainless enclosed
fasteners and topworks, multipiece V-ring packing, gland plate
style packing adjustment and
lockable. Available with threaded,
socket weld and butt weld ends.
Sizes: 3/8" to 2". Limited options.
92-100 SERIES
78 SERIES
Choose from bronze ball
valve with solid brass
cap and chain, bronze
4" NPT ball valve,
bronze instrumentation
ball valve, or purge and
drain ball valve models;
many options available.
80/81 SERIES
Compact Saturn® bar
stock steel unibody ball
valve. Certified fire safe
with graphite packing;
RPTFE seats and seals,
blowout-proof stem
design. Sizes 1/4" to 2".
93 SERIES
Bronze ball valve for
LP gas, natural gas,
flammable liquids and
heated oil; adjustable
packing gland. UL listed;
Sizes: 1/4" to 3".
Saturn® carbon steel
unibody ball valve;
WOG rated 1,500 to
2,000 psig, cold, nonshock; optionally meets
API 607 fourth edition
fire safe standards.
Sizes: 1/4" to 2".
83B SERIES
Carbon steel, full-port three piece
ball valve, class 600 (all sizes):
stainless ball & stem, ASME
B16.34, ISO 5211 mounting pad,
enclosed B8M fasteners,
stainless topworks, multi-piece
V-ring packing, gland plate style
packing adjustment, static
grounding, spiral gaskets and
lockable. Available with threaded, socket weld and
butt weld ends. Sizes: 3/8" to 2". Numerous options:
including live-loading or tested to API 607, 5th edition.
86A SERIES
89 SERIES
95 SERIES
Carbon steel ball valve
with threaded ends;
1,500 and 2,000 psig
WOG; easy actuator
mounting. Sizes 1/4"
to 3". (Actuator Ready
version: 89-ARX-64.)
Stainless steel, full-port three
piece ball valve, 1500 psig CWP;
ISO 5211 mounting pad,
enclosed fasteners, multi-piece
V-ring packing, gland plate style
packing adjustment and lockable.
Available with threaded, socket
weld and butt weld ends. Sizes:
3/8" to 2". Limited options.
Bronze stop and
drain ball valve; 400
psig WOG rating;
threaded or solder ends;
many handle options
available. Sizes: 1/2",
3/4" and 1".
86B SERIES
9A/90 SERIES
Saturn® bronze one piece
ball valve; UL listed 300
psig (9A rated 600 psig
WOG); threaded ends; for
fuel, inert gas, flammable
liquids; “tee” or lever
handles. 90 Series sizes:
1/2" to 2". 9A Series sizes:
1/4" to 2".
12
96 SERIES
Saturn® stainless steel
unibody ball valve; WOG
rated 1,500 to 2,000 psig;
optionally meets API 607
fourth edition fire safe
design standards; “tee”,
round, cam lock or latch
lock handles available.
Sizes: 1/4" to 2".
Customer Service 1-704-841-6000
Stainless steel, full-port three
piece ball valve, class 600; ASME
B16.34, (all sizes), ISO 5211
mounting pad, enclosed B8M
fasteners, multi-piece V-ring
packing, gland plate style packing
adjustment, static grounding,
spiral gaskets and lockable.
Available with threaded, socket weld and butt weld
ends. Sizes: 3/8" to 2". Numerous options: including
live-loading or tested to API 607, 5th edition.
All Products Brochure
Apollo® AR™
Ball Valves
Apollo® AR™ actuator ready ball valves feature an ISO
5211-style mounting pad with no handle to throw away.
They are made for high cycle applications, and like all
Apollo valves, the bodies are cast to the highest
metallurgical standards for long service life.
They are available in stainless steel, carbon steel and
bronze. They feature a live loaded multi-stacked “V”ring stem packing. All models come standard with a
stainless steel ball and stem, and multifill seats, seals
and packing rated up to 2,000 psig or to 450˚F, or to
250 psig saturated steam. (Bronze rated to 600 psig.)
Heavy-Duty
Apollo® Ball
Valves
•
•
•
•
•
•
•
Blow-out proof stem
Field repairable
RPTFE seats and stuffing box rings
Meets WW-V-35C federal standards
Fire safe designs available
Expanded pressure ranges
High-performance alloys
AR Ball Valves,
Specialty
Valves, Top
Entry Valves
72 SERIES
Carbon steel high
pressure ball valve;
rated 3,000 psig.
Sizes 1/4" to 2".
Pressure is body rating.
71-AR SERIES
Bronze standard port
ball valve with
threaded ends; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 3/4" to 3".
87A SERIES
Stainless steel Class
150 and 300 flanged
valve; regular or fullport; ISO 5211 actuator
mounting pad. Sizes:
1/2" to 12".
76-AR SERIES
Stainless steel standard
port ball valve;
investment cast
components; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 1/4" to 3".
77-AR SERIES
Bronze full-port ball
valve with threaded
ends; ISO mounting
pad; advanced liveloaded packing design;
latch lock handle
available. Sizes 1/4"
to 2".
88A SERIES
Carbon steel Class 150
and 300 flanged valve;
regular or full-port; ISO
5211 actuator mounting
pad. Sizes: 1/2" to 12".
Carbon steel standard
port ball valve;
investment cast
components; ISO
mounting pad;
advanced live-loaded
packing design; latch
lock handle available.
Sizes 1/4" to 3".
www.conbraco.com
Features:
• Sizes 1/2" to 12"
• Temperatures - 150˚F to +1,000˚F
• ANSI Pressure Class 150, 300, 600
• High vacuum to 1,500 psig
• 16 seating materials, four
different configurations
• High-strength encapsulated metal
seat holders
• 11 body materials
• 11 ball and stem materials
• Six end configurations
• Standard bonnets, extended bonnets
and fugitive emissions bonnets all interchangeable
BUTT WELD SERIES
Available in ANSI
Class 300 to 8" and
Class 600 to 6" size.
Schedule 10, 40 and
some 80 pipe ends
offered. A full range
of body, seat and seal
materials are available.
Specialty Valves
399/87A-400/401R SERIES
89-AR SERIES
Top Entry
Apollo® Ball
Valves
Alloy 20 two piece,
three piece, and Class
150 flanged ball valves;
reinforced seats and
seals; options available.
Two piece sizes: 1/4" to
2". Three piece sizes:
1/2" to 2". Flanged
sizes: 1/2" to 4".
FLANGED SERIES
In 150, 300 and 600
ANSI Class.
Materials: Alloy 20,
carbon steel,
Hastelloy C, M35-1,
nickel, stainless steel,
titanium and others
upon request. Sizes
1/2" to 10".
13
All Products Brochure
Top Entry
Apollo® Ball
Valves, Apollo
Actuators
Steam Jacketed
Top Entry Valves
Apollo® Pneumatic
Actuators And
Accessories
Apollo® CompacTorque™ actuators are totally
manufactured in the USA and feature rack and
pinion design. Available in 10 sizes to
complement torque requirements of most
Conbraco valves. Both spring return and double
acting versions are available. Spring return
torque ratings at 80 psig are from 64 to 4248 lbin. Patented Universal Shaft Adapters make it
easy for direct mount to Apollo butterfly valves.
FULL-PORT FLANGED SERIES
In 150, 300 and 600
ANSI Class. Materials:
Alloy 20, carbon steel,
Hastelloy C, M35-1,
nickel, stainless steel,
titanium and others
upon request. Sizes
1/2" to 6".
NPT AND SOCKET
WELD SERIES
Available in 300 ANSI
Class sizes 1/2" to 3";
and 600 ANSI Class 1/2"
to 2". Materials: Alloy 20, carbon
steel, Hastelloy C, M35-1,
nickel, stainless steel, titanium
and others upon request. Fullport available in 300 ANSI class
sizes 1/2" to 2" and 600 ANSI
class sizes 1/2" to 1-1/2".
Conbraco’s Apollo® Top Entry Ball Valves
are ideally suited for jacketed applications.
The top entry concept allows for continued
access to stem packings and valve internals
for ease of maintenance without disturbing
the jacket itself or removing the valve from
the pipeline.
Fugitive Emissions Bonnet Features
• Incorporates a monitoring port
between two packing sets enabling
sensing of toxic leakage before it
escapes to the atmosphere.
• The lower packing stack is
pressure activated as well as live
loaded by an internal spring. Use
of bellville washers will insure a
positive load to both the upper and
lower packing, providing a longer
cycle life.
14
• The monitoring port can be
pressurized with an inert media to
a value in excess of internal valve
pressure insuring zero leakage to
the atmosphere. Also, a low
pressure gauge can be fitted here
or it can be used as a sniff port.
Customer Service 1-704-841-6000
Double acting torque ratings at 80 psig range
from 60 lb-in. to 10,396 lb-in. Apollo®
CompacTorque™ actuators feature ISO 5211
interface dimensions and NAMUR solenoid
and accessory interface dimensions.
Conbraco also supplies pre-engineered
stainless steel valve/actuator mounting kits
for all valves equipped for automation.
Accessories
• Mechanical and electronic position indicating
switches (various NEMA enclosure ratings).
• Pneumatic positioners: single acting, double
acting, and I to P.
• Position transmitters (4-20 mA, 0-1000 OHMS).
• Solenoid valves (multiple voltages, AC or DC,
various electrical ratings).
• Air filter regulators.
All Products Brochure
Pipeline
Strainers, Apollo®
Butterfly Valves
Apollo® Electric Actuators
LB SERIES
AE SERIES
Electric actuators;
torque output: 200 to
1,000 lb-in.; NEMA 4 &
4X (water tight &
corrosion-resistant)
enclosures; thru shaft
manual override.
Reversing motors in 24,
115, 220 VAC & 12 and
24 VDC. CSA Listed.
Electric actuators;
torque output: 300 to
54,000 lb-in.; on/off or
modulating control
available. 115 VAC50/60 Hz single phase.
220/440 VAC - 50/60 Hz
three phase.
CS/CL SERIES
APOLLO® “ACUTORQUE”
STAINLESS STEEL ACTUATOR
Industrial quality reversing motor design
electric actuator; operating torques from
150 to 3,000 lb-in.;
AC and DC motors;
extended duty cycles;
NEMA 4 and 7
enclosures.
Apollo®
Butterfly Valves
The Apollo AcuTorque actuator is
manufactured with an integral internal air
manifold. Valve interface dimensions are
ISO 5211 standard. The solenoid mounting
pad and slotted shaft are manufactured
to NAMUR dimensional standards. For
applications not requiring a direct mount
solenoid valve, ports NPT threaded.
Investment cast steel body and unique
drive pinion make the AcuTorque an
excellent choice for tough applications.
Torque outputs from 21 to 20,929 lb-in.
141/143 SERIES 2" TO 24"
Pipeline Strainers
STRAINERS
Materials of Construction: Body: Cast iron,
bronze, carbon steel or stainless steel (Y-type).
End connections:
threaded, socket weld,
or flanged (Class: 125
or 250). Screen options:
304 stainless steel
standard with optional
brass, Ni-Cu, or 316
stainless steel. Screen
openings available from
100 mesh to 1/2"
diameter perforations.
Sizes: 1/4" to 18".
www.conbraco.com
General Purpose/Economy Design
For use in industrial and HVAC/
mechanical markets. The 141 Model is
a wafer style valve; the 143 Model is
a companion lug. Both are rated at
200 psig bubble-tight shut-off between
flanges. They feature an extended
neck length to provide a minimum 2"
clearance between valve top plate and
pipe flange. 141/143 Series meet MSS
SP-67 and API 609 specifications.
15
All Products Brochure
For more information contact your nearest Apollo / Conbraco / Distributor:
Conbraco Industries, Inc.
P.O. Box 247
Matthews, NC 28106
Phone: (704) 841-6000
Fax: (704) 841-6020
Conbraco Industries, Canada
Phone: (905) 761-6161
Fax: (905) 761-6666
www.conbraco.com
Apollo®, Saturn®, and Conbraco® are registered trademarks of Conbraco Industries, Inc.
Conbraco Industries reserves the right to change specifications without notice.
©2005 Conbraco Industries, Inc.
CICA9000
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement