Digital Security Controls Bravo3P Digital Bravo3P motion detector Installation Instructions

Below you will find brief information for motion detector Bravo3P Digital Bravo3P. The Digital Bravo3P is a pet immune PIR detector designed to minimize false alarms in environments with pets, with a maximum combined pet weight of 60 lbs (27.3 kg). It features digital technology, multi-level signal processing, dual operation parameters and automatic temperature compensation for greater accuracy and performance. The unit also features an exclusive pet rejection lens to help avoid nuisance alarms caused by pets.

PDF Download
Document
Digital Bravo3P Pet Immune PIR Detector Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Pet Immune
  • Digital Technology
  • Multi-level Signal Processing
  • Dual Operation Parameters
  • Automatic Temperature Compensation
  • Pet Rejection Lens
  • Effective Immunity Against Pets
  • Maximum Combined Pet Weight: 60 lbs
  • Proven Noise Immunity
  • Easy to Install

Frequently asked questions

The Bravo3P is effective against single or multiple pets whose total combined weight does not exceed 60lbs (27.3kg).

The detector should be mounted a minimum of 6.5 ft (1.95 m) high and not higher than 10 ft (3 m) (7.5 ft (2.3 m) recommended).

The detector should be walk tested weekly by the end user and annually by the installer.

Jumper J2 is used to configure the detector to the weight of the pet(s) in the environment. For an environment with a single animal whose weight does not exceed 30lbs (13.6 kg) the unit should be set to "normal" (J2 ON). In an environment with single or multiple pets whose combined weight is greater than 30lbs (13.6 kg) and not greater than 60lbs (27.3 kg) set J2 to "hostile" (J2 OFF).
Preparing document for printing…
0%