More info inside. Quality | Precision | Speed

More info inside. Quality | Precision | Speed
is
5
o 1702
cc
r e dite
FIVE DAY TURNAROUND
A
Quality | Precision | Speed
d
OR BETTER GUARANTEED*
More info inside.
1
6-7
FORCE / MASS / TENSION
24
23 20-22 18-19 14-17 12-13 10-11
TORQUE
8-9
2-5
What’s
inside?
OPTICS
DIMENSIONAL
FLOW
PRESSURE
TOOL
TESTING
LAB
This catalog includes most of our calibration capabilites and
pricing of tools “in house.” For on-site calibration, please contact
[email protected] or call us @ 937-898-5696. Our capabilites are
continuing to grow, therefore, contact us if your tool is not listed.
Ask us about our
FREE Cincinnati,
Columbus, and
Dayton tool pick-up
Introducing
and delivery service.
Tool Testing Lab Inc. would like to introduce
you to Mobile Calibration. Our new 30’ trailer,
filled with certified equipment, can provide
you with long form ISO17025 certification for
almost all of your calibration needs.
Just another calibration option brought
to you by Tool Testing Lab.
Currently, we provide service within a 200 mile
radius of our facility. We are always expanding,
so please don’t hesitate to ask if we can service
your area.
For on-site pricing and capabilites call us @ 937-898-5696 or email [email protected]
“We currently service a 200
mile radius from our facility.”
Michigan
Indiana
Tool Testing Lab, Inc.
Dayton
West Virginia
Kentucky
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
1
Here at the lab, we also carry a variety of used tools. As
a thank you for purchasing your tool through us, we will
include the certification with each tool that you buy new
or used.
AC DIVIDER
A
r e dite
is
FIVE DAY TURNAROUND
OR BETTER GUARANTEED*
110.00
DATA LOGGER
160.00
70.60
DC POWER SUPPLY
70.60
701.00
DECADE CAPACITOR BOX <= 1% TOL
70.60
120.00
DATA BUCKET
180.00
110.00
ALTERNATOR ANALYZER
44.00
BONDING METER
ALTIMETER
99.50
ALTITUDE ENCODER TESTER
70.60
BORESCOPE
150.00
DECADE CAPACITOR BOX > 1% TOL
AMP CLAMP
44.00
BRAKE MICROMETER
30.50
DECADE RESISTOR BOX <= 1% TOL
70.60
AMP CLAMP WITH MULTIMETER
70.60
BREAKOUT BOX
44.00
DECADE RESISTOR BOX > 1% TOL
120.00
AMPERAGE TESTER
44.00
BUSS ANALYZER
105.00
DIELECTRIC TESTER <= 10K VOLTS
110.00
AMPMETER
44.00
AMPROBE CLAMPMETER
44.00
DIELECTRIC TESTER: > 10K VOLTS AND
<= 100K VOLTS
235.00
ANALOG MULTIMETER
70.60
ANGLE POSITION INDICATOR
110.00
ANTI-SKID TESTER
70.60
APU TURBINE TESTER
165.00
ATC DME/TRANSPONDER TESTER
280.00
ATTENUATOR
44.00
AUDIO GENERATOR
105.00
AUDIO OSCILLATOR
105.00
AUTOPILOT RAMP TEST SET
280.00
AVIONICS BUSS ANALYZER
105.00
BOOT STRAP KIT
C
CABIN PRESSURE TESTER
116.00
DIGIBRIDGE
110.00
CABLE FAULT DETECTOR
44.00
DIGITAL COUNTER
70.60
CABLE FAULT TESTER
70.60
DIGITAL CURRENT METER
44.00
CAPACITANCE METER
70.60
CHADWICK PROP BALANCER
225.00
DIGITAL INSULATION TESTER <=5K
VOLTS
70.60
CHRISTIE BATTERY CHARGER
232.50
DIGITAL MULTIMETER
70.60
CLAMPMETER
44.00
160.00
CLOCK
32.00
DIGITAL OSCILLOSCOPE: SINGLE
CHANNEL
COMPASS
105.00
DIGITAL OSCILLOSCOPE: TWO
CHANNEL
200.00
CONCORDE BATTERY CHARGER
70.60
240.00
CONDUCTIVITY/EDDY CURRENT
TESTER
DIGITAL OSCILLOSCOPE: FOUR
CHANNEL
205.00
DIGITAL OSCILLOSCOPE: FIVE
CHANNEL
260.00
70.60
DIGITAL TACHOMETER
70.60
BARFIELD ADAPTOR MODULE
70.60
CONDUCTIVITY METER
BARFIELD FUEL QUANITY TESTER
145.00
CONDUCTIVITY STANDARD, EACH
75.00
BARFIELD MEGGER
100.00
COUNTER
70.60
BARFIELD, SIGHT COMPASS
105.00
COUNTER/TIMER HIGH ACCURACY
180.00
BATTERY ANALYZER
145.00
CURRENT CALIBRATION COIL
225.00
BATTERY CHARGER: SMALL
44.25
CURRENT GUN
44.00
BATTERY CHARGER: MEDIUM
108.50
CURRENT LEAKAGE TESTER
70.60
BATTERY CHARGER: LARGE
232.50
CURRENT PROBE
44.00
BATTERY CHARGER: NICAD
232.50
CURRENT SHUNT
70.60
BATTERY DISCHARGE TESTER &
ANALYZER
2
70.60
AC POWER SUPPLY
232.50
Popular
Certifications
d
5
A
cc
D
70.60
BATTERY LOAD TESTER
BENCH MULTIMETER OVER 5.5 DIGITS
TO 6.5 DIGITS
B
o 1702
44.00
BATTERY DISCHARGER
DIGITAL TIMER
32.00
DME /TRANSPONDER TEST SET
280.00
DME TEST SET
120.00
DISCHARGER, BATTERY
70.60
DISTORTION ANALYZER
110.00
DUMMY RF LOAD
44.00
E
EDDY CURRENT INSTRUMENT
108.50
EDDY CURRENT TESTER
108.50
EDDY CURRENT/CONDUCTIVITY
TESTER
205.00
ELECTRONIC COIL TESTER
70.60
ELECTRONIC COUNTER
70.60
ELECTRONIC ENGINE TIMER
110.00
ELECTRONIC TACHOMETER
70.60
ENCODER
23.25
ENGINE ANALYZER
70.60
F
FIRE DETECTOR TEST SET
110.00
FLITEPHONE TEST SET
225.00
FREQUENCY COUNTER
110.00
FREQUENCY METER
70.60
FUEL QUANITY TESTER
145.00
FUNCTION GENERATOR
140.00
G
Need a new
multimeter?
Call 937-898-5696 for
new multimeter pricing
J
JETCAL ANALYZER
KILOWATT METER
K
L
LCR METER
335.00
N
70.60
NETWORK CABLE TESTER
44.00
NICAD BATTERY CHARGER
232.50
70.60
O
142.00
LEAKAGE TESTER
71.00
OHMMETER: MULTIRANGE
LOOP CONTROLLER
44.00
OHMMETER: PANELMOUNT
44.00
OSCILLOSCOPE: SINGLE CHANNEL
160.00
OSCILLOSCOPE: TWO CHANNEL
200.00
OSCILLOSCOPE: FOUR CHANNEL
240.00
OSCILLOSCOPE: FIVE CHANNEL
260.00
32.00
GRAPHIC SCOPE METER
70.60
GAUSS METER
32.50
GROUND BOND TESTER
70.60
MAGNETIC COMPASS
GROUND FAULT INDICATOR TESTER
70.60
MASTERCHARGER
232.50
GROUND IMPEDANCE TESTER
70.60
MECHANICAL TACHOMETER
70.60
GROUNDING STRAP
44.00
MEGGER: <= 1000 VOLTS
70.60
MEGGER: 1001 AND <= 10000 VOLTS
110.00
PAINT RESISTIVITY METER
MEGGER: 10001 AND <= 100000 VOLTS
235.00
PH METER
44.00
MEGOHMMETER
70.60
PHASEMETER
110.00
MIC / HEADSET TESTER
44.00
PROP BALANCER
225.00
MICROAMPMETER
44.00
PHOTO-TACHOMETER
70.60
MICRO-OHMMETER
70.60
PORTA TEST UNIT, FUEL
400.00
MICROPHONE/HEADSET TESTER
44.00
POWER SUPPLY, AC
110.00
MILLIAMPMETER
44.00
POWER SUPPLY, DC
70.60
MILLI-OHMMETER
70.60
PROBE, HIGH VOLTAGE > 1000 VOLTS
108.00
MOISTURE METER
105.00
PROCESS CALIBRATOR
150.00
MULTIMETER: DIGITAL OR ANALOG
70.60
MULTIMETER: HANDHELD
70.60
MULTIMETER: OVER 5.5 DIGITS TO 6.5
DIGITS
110.00
MULTI-FUNCTION CALIBRATOR
500.00
HEAT BONDING KIT
H
110.00
HEATCON
350.00
HIGH FREQUENCY SURGE TESTER
150.00
HIGH PRESSURE STATIC TEST
49.75
HIGH TENSION LEAD TESTER
44.00
HIGH VOLTAGE PROBE > 1000 VOLTS
108.00
HIPOT/DIELECTRIC TESTER: <= 10000
VOLTS
110.00
235.00
HOT STICK TESTER
235.00
IGNITION LEAD TESTER
I
44.00
ILS TEST SET
250.00
IMPEDANCE TESTER
70.60
INSULATION TESTER: <= 1000 VOLTS
70.60
INSULATION TESTER: 1001 – 10K
110.00
INSULATION TESTER: 10001 – 100K
235.00
937-898-5696
105.00
P
Popular
Certifications
HIPOT: > 10000 VOLTS AND <= 100K
VOLTS
M
RADAR TEST SET
R
500.00
RADIOMETER
70.60
RECORDER, AMPROBE
76.50
140.00
RECTIFIER
40.50
70.60
REFLECTOMETER
70.60
MULTI-RANGE VOLTMETER
70.60
RF DUMMY LOAD
44.00
MULTI-SCOPE METER
70.60
RF SIGNAL GENERATOR
284.00
RF MILLIVOLT METER
75.00
MULTI-FUNCTION GENERATOR
MULTI-RANGE OHMMETER
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
3
VOLTMETER: SINGLE RANGE
44.00
70.60
VOLTMETER: MULTI-RANGE
70.60
SAFETY ANALYZER
32.00
SCOPEMETER
110.00
d
5
A
is
70.60
VOR/ILS TEST SET
250.00
VOR/ILS/GS TEST SET
270.00
VOR/ILS/MB/COMM TEST SET
280.00
70.60
W
SCR TESTER
44.00
SERVICE MONITOR, HIGH POWER
284.00
WATTMETER
SERVICE MONITOR, LOW POWER
189.00
WATTMETER, ELEMENT EACH
44.00
SHUNT, CURRENT
44.00
WATTMETER, MULTIRANGE
110.00
SIGNAL GEN., CW<=2GH
284.00
WHEATSTONE BRIDGE
110.00
SIGNAL GEN., CW/MODULATION <2GH
284.00
WRIST STRAP TESTER
44.00
SIGHT COMPASS
105.00
SOUND LEVEL METER
70.60
STABILIZATION TESTER
70.60
STATIC GROUND STRAP
44.00
STATIC STRAP TESTER
44.00
STOPWATCH
32.00
STROBSCOPE
70.60
SUPERSEDER II & III BATTERY CHARGER
232.50
SWEEP GENERATOR
140.00
T
70.60
TCAS TEST SET
280.00
TIMER
32.00
TIME-DOMAIN REFLECTOMETER
105.00
TIME SYNTHESIZER
284.00
TCAS TEST SET
280.00
TRANSPONDER
280.00
TRANSPONDER/INTERROGATOR SET
280.00
TRICKLE CHARGER
44.25
TOUCH TESTER
44.00
U
ULTRA HIGH VOLTAGE HIPOT>50K
VOLTS
235.00
ULTRASONIC DETECTOR
105.00
VIBRATION ANALYZER
220.00
FIVE DAY TURNAROUND
OR BETTER GUARANTEED*
VIBRATION METER
V
X
XPNDR/INTERROGATOR SET
280.00
ZETEC EDDY CURRENT INSTRUMENT.
108.50
Z
70.60
TACHOMETER: MECHANICAL
o 1702
r e dite
120.00
SCOPE PROBE
TACHOMETER: DIGITAL
cc
S
VOLT-OHM METER
105.00
Visit www.ttlcal.com
4
FIVE DAY TURNAROUND
OR BETTER GUARANTEED*
Need a new tool? Give us a try. We
include certification with any new or
used tool purchase.
110.00
RUDDER POWER CONTROL BOX
Popular
Certifications
RPM ENGINE METER
Popular Electronic Products
Stop Watch
✓ 1/100th second resolution for 30 min
✓ 1 second resolution up to 24 hours
✓ Calendar displays day,
month, and date
Offering you the best products with accuracy guaranteed.
MODEL
NUMBER
True-rms AC/DC Clamp Meter
EXT-365515
✓ 600 A ac and dc current measurement
✓ Optional iFlex™ current probe measures
to 2500 A ac
MODEL
✓ Min, max, avg, and inrush
NUMBER
FLU-374
MODEL
NUMBER
FLU-179
MODEL
NUMBER
EXT-330
Mini Multimeter
✓ Autoranging DMM with 12 functions and 0.5%
basic accuracy
✓ AC/DC voltage and current , resistance,
capacitance, frequency, temperature, duty cycle,
and diode/continuity
✓ Built-in non-contact AC voltage detector (NCV)
with red LED indicator and audible beeper
✓ Large-digit 4,000 count LCD display
✓ 10A max current
✓ Max hold, data hold, relative and auto power off
✓ Type K temperature measurements
✓ Complete with test leads, tilt stand, protective
holster, general purpose type K bead probe and 2
AAA batteries
Case Included
MEASURETEMP
Fluke 179 Multimeter
Measures temperature (probe included)
Large LCD backlit display
Lifetime warranty
Automatic ranging that measures twice as
quickly as other multimeters
✓ Measures voltage, resistance, capacitance,
frequency, diode testing, continuity and 10
amp current capacity
✓ Basic accuracy .09%
✓ Includes manual, test leads, and case
✓
✓
✓
✓
Case Included
MODEL
NUMBER
TTL-184738747-A
MODEL
NUMBER
EXT-470
MODEL
NUMBER
ECONOMICAL
Extech Multimeter
MODEL
NUMBER
Case Included
FLU-117
Fluke 177 Multimeter
✓ Large LCD backlit display
✓ Lifetime warranty
✓ Automatic ranging that measures twice as
quickly as other multimeters
✓ Measures voltage, resistance, capacitance,
frequency, diode testing, continuity and 10
amp current capacity
✓ Basic accuracy .09%
✓ Includes manual, test leads, and case
✓ True RMS DMM with 12 functions
and 0.3% basic accuracy
✓ AC/DC voltage and current, resistance,
capacitance, frequency, typeK and IR
temperature, diode/continuity, and duty cycle
✓ Built-in non-contact InfraRed
thermometer with 8:1 distance to target
ratio with 0.95 fixed emissivity
✓ Input fuse protection and mis-connection warning
✓ 20A max current
✓ Type K temperature measurements
✓ Data hold, relative, auto power off
✓ Large-digit backlit LCD
✓ Complete with CAT III test leads, tilt stand,
protective holster, velcro hanging strap, type
K bead wire temp probe and 9V battery
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
FLU-87-5
Fluke 87-5 Multimeter
✓ Unique function for accurate voltage and frequency
measurements on adjustable speed motor drives
and other electrically noisy equipment (87V)
✓ Built-in thermometer conveniently allows
you to take temperature readings without
having to carry a separate instrument
✓ Optional magnetic hanger for easy set-up and
viewing while freeing your hands for other tasks
✓ Large digit display with bright, two-level
backlight makes the 80- Series V significantly
easier to read than older models
www.ttlcal.com
5
Did you know?
At TTL we carry a wide variety of CDI torque
wrenches for purchase. We also stock parts
for almost all American made wrenches so
we can bring your wrench back to life with
precision and quality.
TORQUE
Do you know your torque wrench drive size? Drive size determines cost for digital and analog torque wrenches.
C
d
is
A
OR BETTER GUARANTEED*
6
TORQUE WRENCH TESTER: MULTIRANGE, 2 RANGES
260.00
TORQUE WRENCH TESTER: MULTIRANGE, 3 RANGES
350.00
500.00
COMPUTORQUE TORQUE WRENCH
3/4” DRIVE
63.00
PRESET TORQUE ADAPTOR
32.00
TORQUE ALERT: ¾ INCH DRIVE
63.00
TORQUE WRENCH TESTER: MULTIRANGE, 4 RANGES
435.00
TORQUE ANGLE CHECK ADDED TO
STANDARD FEE
35.00
TORQUE WRENCH, COMPUTORQ II 1/2
INCH DR
42.00
TORQUE CALIBRATOR: <= 75 FT LB OR
900 IN LB
120.00
TORQUE WRENCH, COMPUTORQ II 3/4
INCH DR
63.00
TORQUE CALIBRATOR: > 75 FT LB OR
900 IN LB
175.00
TORQUE WRENCH: 1/4 INCH DRIVE
32.00
TORQUE CALIBRATOR: MULTI-RANGE,
2 RANGES
TORQUE WRENCH: 3/8 INCH DRIVE
37.00
260.00
TORQUE WRENCH: 1/2 INCH DRIVE
42.00
TORQUE CALIBRATOR: MULTI-RANGE,
3 RANGES
TORQUE WRENCH: 3/4 INCH DRIVE
63.00
350.00
85.00
TORQUE CALIBRATOR: MULTI-RANGE,
4 RANGES
TORQUE WRENCH: 1 INCH DRIVE <=
1000 FT LB
435.00
32.00
TORQUE WRENCH: 1 INCH DRIVE >
1000 TO 2500 FT LB
118.00
TORQUE DRIVER: ¼ INCH DRIVE
TORQUE LIMITER
32.00
TORQUE WRENCH: 1-1/2 INCH DRIVE
160.00
TORQUE MULTIPLIER
120.00
350.00
TORQUE SCREWDRIVER: ¼ INCH DRIVE
32.00
TORQUE WRENCH: MULTIPLIER 500110000 FT LB
TORQUE TRANSDUCER: <= 75 FT LB OR
900 IN LB
120.00
TORQUE WRENCH: MULTIPLIER 1000120000 FT LB
500.00
TORQUE TRANSDUCER: MULTI-RANGE,
2 RANGES
260.00
WATCH, TORQUE
41.50
TORQUE TRANSDUCER: MULTI-RANGE,
3 RANGES
350.00
TORQUE TRANSDUCER: MULTI-RANGE,
4 RANGES
435.00
TORQUE WATCH
41.50
TORQUE WRENCH TESTER: <= 75 FT LB
OR 900 IN LB
120.00
DIGITAL TORQUE WRENCH: 1/4 INCH
DRIVE
32.00
DIGITAL TORQUE WRENCH: 3/8 INCH
DRIVE
37.00
DIGITAL TORQUE WRENCH: 1/2 INCH
DRIVE
42.00
DIGITAL TORQUE WRENCH: 3/4 INCH
DRIVE
63.00
DIGITAL TORQUE WRENCH: 1 INCH
DRIVE <= 1000 FT LB
85.00
DIGITAL TORQUE WRENCH: 1 INCH
DRIVE > 1000 TO 2500 FT LB
118.00
DIGITAL TORQUE MULTIPLIER 500110000 FT LB
350.00
DIGITAL TORQUE MULTIPLIER 1000120000 FT LB
500.00
GEARTRONICS TORQUE MULTIPLIER
120.00
NUTRUNNER
86.00
OIL FILTER WRENCH
N
O
P
32.00
POWERDYNE TORQUE MULTIPLIER: <
2501 FT LB
160.00
POWERDYNE TORQUE MULTIPLIER:
2501-5000 FT LB
250.00
T
W
Popular
Certifications
5
FIVE DAY TURNAROUND
175.00
POWERDYNE TORQUE MULTIPLIER:
10001-20000 FT LB
o 1702
red
TORQUE WRENCH TESTER: >75 FT LB
OR 900 IN LB
42.00
G
ite
350.00
COMPUTORQUE TORQUE WRENCH
1/2” DRIVE
D
cc
POWERDYNE TORQUE MULTIPLIER:
5001-10000 FT LB
Torque- Turning wrenches from the beginning
It’s where calibration all began at Tool Testing Lab. Beginning with a wrench
and a dream, Tool Testing Lab has made huge strides in becoming a versatile
company to better serve our customers calibration and tooling needs. As
our capabilities continue to expand, so do our expectations... We set our
standards high in delivering quality service while still providing a quick
turn-around time.
We carry a wide variety of click-type, digital, and dial torque wrenches in stock.
New and used stock tool items ship same day.
7
FORCE / MASS / TENSION
Did you know?
All new tool purchases are moved to the front
of the line for calibration. Our goal is for them
to ship out the same day.
Need an aircraft scale in a hurry? We offer a certified 50K aircraft scale as a weekly rental. Call for details.
A
AIRCRAFT SCALE UP TO 5,000 LBS.
EACH CELL
78.50
AIRCRAFT SCALE 5,001 TO 10,000 LBS.
EACH CELL
100.00
AIRCRAFT SCALE 10,001 TO 50,000 LBS.
EACH CELL
AIRCRAFT SCALE 50,001 TO 100,000 LBS.
EACH CELL
BALANCE BEAM SCALE
B
A
d
is
ite
red
FIVE DAY TURNAROUND
OR BETTER GUARANTEED*
136.00
DIGITAL TENSIOMETER US & BRITISH
CABLE
184.00
285.00
DUROMETER: 1 TYPE
47.25
DUROMETER: 2 TYPES
70.75
DUROMETER: 3 TYPES
97.25
DUROMETER: 4 TYPES
123.75
DUROMETER: STANDARD
123.75
31.50
48.00
BORROUGHS CABLE TENSIOMETER
48.00
BRITISH TENSIOMETER + US CABLE
184.00
DYNAMOMETER
56.50
CABLE TENSIOMETER: PACIFIC
SCIENTIFIC
119.00
CABLE TENSIOMETER: TENSITRON
119.00
CABLE TENSIOMETER: BORROUGHS
48.00
CABLE TENSIOMETER: BRITISH & U.S.
184.00
193.00
CABLE TENSIOMETER: BRITISH CABLES
ADDITIONAL COST
65.00
CALIBRATION SPRING
31.50
CHAIN HOIST
78.50
CRANE SCALE UP TO 500 LBS. EACH
100.00
CRANE SCALE 501 TO 20,000 LBS. EACH
183.00
CUSTOM LOAD TEST
71.00
31.50
Popular
Certifications
5
cc
DIGITAL FORCE GAGE
119.00
BELT TENSIONER GAGE
CABLE TENSIOMETER: TENSIOMETER:
OVER 600 LBS.
183.00
DIGITAL TENSIOMETER US CABLE
31.50
C
DIGITAL DYNAMOMETER
DIGITAL SCALE
BEAM SCALE
CABLE LIFTING BAR
o 1702
D
56.50
ENERPAC LOAD CELL 5,001 TO 10,000
LB EACH
100.00
ENERPAC LOAD CELL UP TO 5,000 LBS.
EACH
78.50
ENGINE SLING
78.50
F
FABRIC TESTER
32.50
FALL RESTRAINT SYSTEM
450.00
FISH SCALE
31.50
FLOOR SCALE UP TO 100 LBS.
31.50
FLOOR SCALE 101 TO 500 LBS.
100.00
FLOOR SCALE 501 TO 1000 LBS. EACH
150.00
FLOOR SCALE 1,001 TO 3000 LBS. EACH
225.00
FLYING WIRE TENSIOMETER
145.00
FORCE GAUGE
78.50
GRAM SCALE
8
937-898-5696
E
183.00
G
GRAM WEIGHT, PER WEIGHT < 1 Kg
5.60
GRAM WEIGHT, PER WEIGHT >= 1 Kg
10.75
GRIPSCALE
23.50
100.00
HOIST 501 TO 20,000 LBS. EACH
183.00
KENT-MOORE TENSION GAUGE
48.00
KNEE FORCE GAUGE
44.00
KNEE JOINT TESTER
44.00
K
L
LOAD CELL UP TO 5,000 LBS. ONE
DIRECTION
78.50
LOAD CELL 5,001 TO 10,000 LBS. ONE
DIRECTION
100.00
LOAD CELL 10,001 TO 50,000 LBS. ONE
DIRECTION
136.00
LOAD CELL 50,001 TO 100,000 LBS.
COMPRESSION
285.00
LOAD CELL UP TO 5,000 LBS. BOTH
DIRECTIONS
117.75
LOAD CELL 5,001 TO 10,000 LBS. BOTH
DIRECTIONS
150.00
LOAD CELL 10,001 TO 40,000 LBS. BOTH
DIRECTIONS
204.75
LB. WEIGHTS EACH, < 2 LB OR 32
OUNCE
5.60
LB. WEIGHTS EACH, >= 2 LB OR 32
OUNCE
10.75
OZ. WEIGHT < 32 OZ
OZ. WEIGHT > 32 OZ
31.50
11601 N. Dixie Dr, Tipp City, OH 45371
H
HOIST UP TO 500 LBS. EACH
www.ttlcal.com
O
5.60
10.75
P
W
PLATFORM SCALE < 101 LBS
31.50
WEIGHT EACH, < 2 LB OR 32 OUNCE
5.60
PLATFORM SCALE 101 TO 500 LBS.
100.00
WEIGHT EACH, >= 2 LB OR 32 OUNCE
10.75
WEIGHT, GRAM < 1 Kg
5.60
PLATFORM SCALE 501 TO 1000 LBS.
EACH
150.00
PLATFORM SCALE 1,001 TO 3000 LBS.
EACH
225.00
PROOF TEST (CHAIN OR CABLE)
56.50
PROVING RING
98.00
PULL TESTER, WIRE TERMINALS
108.00
PUSH OR PULL SCALE
31.50
S
44.00
SAFE FLIGHT SCALE
44.00
SAFETY HARNESS
56.50
SCALE: BALANCE BEAM
31.50
SCALE: DIGITAL
31.50
SCALE: GRAM
31.50
SCALE: PUSH OR PULL
31.50
SCALE: SPRING OR FISH
31.50
SHOCK ABSORBING LANYARD
56.50
SPRING SCALE
31.50
SPRING TESTER
44.00
SPRING, CALIBRATION
31.50
STRAP & BANDING TENSION METER
48.00
TENSIOMETER: BORROUGHS
48.00
TENSIOMETER: BRITISH CABLE ONLY
119.00
TENSIOMETER: DIGITAL (US CABLE)
119.00
TENSIOMETER: FLYING WIRE
145.00
TENSIOMETER: OVER 600 LBS.
193.00
TENSIOMETER: U.S. CABLE ONLY
119.00
TENSIOMETER US & BRITISH CABLE
184.00
TRIPLE BEAM SCALE
31.50
T
UTILITY SCALE
VALVE SPRING TESTER
U
V
10.75
WELD FORCE GAGE
155.00
WELD PROBE FORCE GAGE
155.00
WINGRIP
450.00
WIRE PULL TESTER
108.00
New and used tensiometers are available for
purchase. We carry a variety of digital and
analog styles for you to choose from. We
understand the importance of comfort and
accessibility when working with tensiometers.
Every tensiometer includes a cable size guide
and a chart when applicable.
Popular
Certifications
SAFE FLIGHT FORCE GAGE
WEIGHT, GRAM >= 1 Kg
31.50
44.00
9
Did you know?
You can check out our ISO/IEC 17025
accreditation online at www.ttlcal.com.
A
108.50
ANEMOMETER-THERMO
110.00
HALOGEN CALIBRATION KIT
APU TURBINE TESTER
165.00
HEAT BONDING KIT
HEATCON
B
BARFIELD TEMPERATURE TESTER
108.50
BONDING METER
70.60
C
CHART RECORDER, TEMPERATURE &
HUMIDITY
D
A
d
is
ite
red
FIVE DAY TURNAROUND
77.00
DECAY HEATER TESTBOX
105.00
DIGITAL INFRARED TEMPERATURE
75.00
DIGITAL TEMPERATURE PROBE
75.00
DIGITAL THERMOMETER
75.00
DIGITAL THERMOMETER: MULTISENSOR
& MULTIRANGE
75.00
DIGITAL THERMOMETER 3 PTS.
37.50
DIGITAL THERMOMETER: EACH
ADDITIONAL CHECK POINT
10.50
DIGITAL TIMER
32.00
DIGITAL TURBINE TEMPERATURE
108.50
DRYWELL CALIBRATOR: SINGLE WELL
150.00
DRYWELL CALIBRATOR: DUAL WELL
250.00
DUAL PROBE THERMOMETER
75.00
EGT SYSTEM TESTER
OR BETTER GUARANTEED*
FIRE DETECTOR
10
108.50
E
F
108.50
37.50
R
110.00
RECORDER, TEMPERATURE & HUMIDITY
77.00
44.00
REMOTE WEATHER STATION
125.00
110.00
350.00
RESISTANCE TEMPERATURE DETECTOR
4-WIRE
145.00
HEATER DECAY TESTER
105.00
RTD 4-WIRE
145.00
HEATER TESTBOX
105.00
HOWELL TEMPERATURE TESTER
110.00
SPRT
HUMIDITY METER
75.00
SURFACE THERMOMETER
HUMIDITY RECORDER
75.00
HUMIDITY/TEMP RECORDER
77.00
HYGROMETER
75.00
HYGRO-THERMOMETER
75.00
S
T
250.00
75.00
TEMP / HUMIDITY RECORDER
77.00
TEMPERATURE BATH
145.00
TEMPERATURE CALIBRATOR
150.00
TEMPERATURE CONTROLLER
110.00
145.00
TEMPERATURE HUMIDITY METER
77.00
IMAGING CAMERA
250.00
TEMPERATURE INDICATOR 3 PTS.
31.50
INFRARED GUN “TEMPERATURE”
75.00
INFRARED TEMPERATURE
75.00
TEMPERATURE INDICATOR: EACH
CHECK POINT
10.50
TEMPERATURE INFRARED GUN
75.00
TEMPERATURE MULTIMETER
75.00
TEMPERATURE PROBE 3 PTS.
37.50
TEMPERATURE PROBE: EACH
ADDITIONAL POINT
10.50
TEMPERATURE SENSOR 3 PTS.
37.50
TEMPERATURE SENSOR: EACH
ADDITIONAL POINT
10.50
ICE POINT CALIBRATOR
Popular
Certifications
5
cc
H
ALCOR EGT SYSTEM TESTER
CHT SYSTEM CHECKER
o 1702
FIRE DETECTOR TEST SET
I
M
MOISTURE INDICATOR
77.00
MULTIPLEXER MODULE
108.50
OVEN TEMPERATURE
PH RECORDER
O
P
145.00
77.00
THERMAL IMAGING CAMERA OR GUN
250.00
PLATINUM RESISTANCE THERMOMETER
250.00
THERMAL-ANEMOMETER
110.00
PORTABLE OVEN
110.00
THERMOCOUPLE CALIBRATOR
145.00
PSYCHROMETER
75.00
THERMOCOUPLE, 1-4 POINTS
37.50
PYROMETER
75.00
THERMOCOUPLE, 5 POINTS OR MORE
75.00
THERMOMETER 3 PTS.<300 DEG
37.50
THERMOMETER: EACH ADDITIONAL
POINT
10.50
TURBINE TEMPERATURE TESTER
108.50
WATER BATH
145.00
W
WEATHER STATION, REMOTE
125.00
WINDSHIELD HEAT TESTER
70.60
Come tour our facility!
Call us to schedule a tour of our lab and meet our technicians who
handle your tools.
Just a glimpse of what we have to offer...
Extech Mini IR Thermometer
✓ IR temperature range: -58° to 1200°F (-50°
to 650°C)
✓ High resolution of 0.1° up to 199.9°
✓ High/low setpoints with audible alarm
✓ 0.10 to 1.00 adjustable emissivity for better
accuracy on different surfaces
✓ Large backlit LCD display
✓ Data hold and min/max, overrange
indicator, auto power off
✓ Includes 9V battery and pouch case
MODEL
MODEL
NUMBER
Get your temp
checked here.
EXT-IR100
Micro IR Thermometer
✓ Measures from -34° to 446°F
(-33° to 230°C) with 0.1°F/°C
resolution
✓ Automatic data hold when
measure button is released
✓ 1:1 field of view (at 1” distance
measure 1” target)
✓ Auto power off
NUMBER
EX-42510A
MODEL
NUMBER
EXT-445815
MODEL
NUMBER
EXT-445702
Hygro-Thermometer Clock
✓ Clock displays
12/24 hour time
✓ Max/min with
eset function
✓ Humidity: 10% - 85%
✓ Temp: -10° to 60°C
(4 to 140°F)
✓ Accuracy: +/-6%
RH; +/-1.8°F
www.ttlcal.com
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
✓
✓
✓
✓
✓
✓
Humidity Alert II
Provides visual indication
when conditions are
favorable to mold growth
Audible and visual alarms
Helps user meet USEPA, CDC,
American Lung Association,
AIHA, and other regulatory
and association guidelines
Relative humidity:
10 to 99%RH
Temp range: 14° to
140°F(-10° to 60°C)
Complete with built in stand,
wall mount bracket, sensor,
and 2 AAA batteries
www.ttlcal.com
MODEL
NUMBER
EXT-445703
Hygro-Thermometer
✓ Large display shows temperature
and humidity simultaneously
✓ Use on desk or wall mount
✓ Check min and max readings
easily with one button
✓ Temp Range: 14° to
140°F (-10° to 60°C)
✓ Relative humidity: 10 to 99%RH
✓ Complete with built in tilt
stand, wall mounting bracket
and 1.5V AAA battery
11
Did you know?
We do not charge an inspection fee for
tools that do not pass certification.
OPTICS
BANDPASS FILTER
B
50.00
PHOTO DETECTOR
BLACKLIGHT METER OR SENSOR
70.60
PHOTOMETER
CHORMA METER
100.00
REFLECTOMETER
C
COLORIMETER
150.00
COLOR METER
100.00
COLOR TILE
100.00
D
DEVORE FLASH GUNMETER
70.60
DIGITAL LIGHT METER: WHITE SENSOR
70.60
DIGITAL LIGHT METER: TWO SENSORS
141.20
FIBER OPTIC LIGHT SOURCE
100.00
FIBER OPTIC POWER METER
100.00
FLASH PHOTOMETER
100.00
F
GLOSS METER
GLOSS STANDARD
LED SOURCE
d
is
r e dite
FIVE DAY TURNAROUND
70.60
70.60
70.60
SPECTROMETER /
SPECTRORADIOMETER
225.00
STROBE LIGHT
70.60
STROBESCOPE
70.60
U
ULTRAVIOLET LIGHTMETER
70.60
UV LIGHT SENSOR
70.60
W
70.60
100.00
100.00
100.00
LIGHT METER: ULTRAVIOLET SENSOR
70.60
LIGHT METER: WHITE SENSOR
70.60
LIGHT METER: TWO SENSORS
141.20
OPTICAL DETECTOR
70.60
O
70.60
100.00
LIGHT COMPARATOR
OR BETTER GUARANTEED*
12
L
S
WHITE LIGHT SENSOR
Popular
Certifications
cc
A
5
o 1702
G
R
SPECTRAL LAMP
100.00
DIGITAL LIGHT METER: ULTRAVIOLET
SENSOR
P
937-898-5696
We thrive on
expanding our
capabilities.
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
BOGO
Buy one calibration, get one free.
At least one calibration purchase necessary to receive one free
calibration. Offer valid for one time use to new customers only.
Repairs are not included. Must send voucher with tools. Visit
www.ttlcal.com and click on the new customer tab for voucher
and more details.
13
Did you know?
We have a climate controlled gage lab used to
test your equipment with optimal accuracy.
DIMENSIONAL
Have a surface plate that requires calibration? Take advantage of our on-site calibration and resurfacing capabilities. Ask us for details.
ANGLE BLOCK
A
70.60
ANVIL INTERCHANGEABLE MIC: 0 TO
6 INCH
52.00
ANVIL INTERCHANGEABLE MIC: 6 TO
12 INCH
80.00
BALL BAR
B
75.00
BESTEST DIAL INDICATOR
23.25
BEVEL PROTRACTOR
31.25
BLADE MICROMETER
22.80
BORE GAGE: STANDARD
31.25
BORE GAGE: INTERCHANGEABLE HEAD
31.25
BORE GAGE: EACH ADDITIONAL HEAD
23.50
BORE GAGE WITH HEAD AND DIAL
INDICATOR
65.25
BORE GAGE WITH RING
58.75
BORESCOPE
150.00
BRAKE DRUM MICROMETER
30.50
BUBBLE LEVEL OR PROTRACTOR
31.25
d
is
FIVE DAY TURNAROUND
OR BETTER GUARANTEED*
14
85.00
CUSTOM 1 OR 2 POINT CHECK
15.75
CAM-TYPE WELD GAGE
31.50
CHAMFER GAGE
43.50
CUSTOM POINT CHECK >2: EACH
ADDITIONAL POINT CHECK
5.25
CMM/LAYOUT
125.00
CUSTOM CMM GAGE
125.00
CMM MEASUREMENT: MAX AXIS
LENGTH <= 24 IN
375.00
CYLINDER GAGE, DIMENSIONAL
31.50
CYLINDER SQUARE
52.00
CMM MEASUREMENT: MAX AXIS EACH
ADDITIONAL 12 INCHES
125.00
COMPULEVEL
31.25
CONTROL SURFACE PROTRACTOR
31.25
COATING THICKNESS STANDARD
23.25
COATING THICKNESS GAGE
50.00
COUNTERSINK GAGE
43.50
CRACK COMPARATOR
44.00
CRIMPER
36.25
CRIMPER + 1 ADDITIONAL DIE
63.50
CRIMPER + 2 ADDITIONAL DIE
90.75
CRIMPER + 3 ADDITIONAL DIE
118.00
CRIMPER + 4 ADDITIONAL DIE
145.25
CRIMPER + 5 ADDITIONAL DIE
172.50
CRIMPER + 6 ADDITIONAL DIE
199.75
CRIMPER + 7 ADDITIONAL DIE
227.00
CRIMPER + 8 ADDITIONAL DIE
254.25
CRIMPER + 9 ADDITIONAL DIE
281.50
CRIMPER + 10 ADDITIONAL DIE
308.75
CRIMPER + 11 ADDITIONAL DIE
336.00
CRIMPER + 12 ADDITIONAL DIE
363.25
CRIMPER + 13 ADDITIONAL DIE
390.50
CRIMPER, DIE ONLY
27.25
CRIMPER PIN GAGE
10.50
CALIBRATION ARM OR BAR (TORQUE):
UP TO 24 IN
75.00
CALIBRATION ARM OR BAR (TORQUE):
25 TO 48 IN
125.00
CALIPERS RANGE: UP TO 12 INCH
23.25
CALIPERS RANGE: 13 TO 24 INCH
28.00
CALIPERS RANGE: 25 TO 36 INCH
45.00
CALIPERS RANGE: 37 TO 48 INCH
56.00
CRIMPER, WIRE
36.25
CALIPERS RANGE: 49 TO 72 INCH
56.00
CRIMPER W/O DIE (HAND-HELD)
36.25
Popular
Certifications
r e dite
A
5
cc
84.00
BELFORT PSYCHROMETER
C
o 1702
10.85
ANGLE POSITION INDICATOR
CALIPERS RANGE: 73 TO 100 INCH
D
DEEP THROAT MICROMETER
23.25
DEPTH GAGE
23.25
DEPTH INDICATOR
23.25
DEPTH MICROMETER: SINGLE ROD
22.80
DEPTH MICROMETER: 0-3 INCH
28.50
DEPTH MICROMETER: 0-4 INCH
34.00
DEPTH MICROMETER: 0-6 INCH
42.00
DEPTH MICROMETER: 0-9 INCH
59.00
DEPTH MICROMETER: 0-12 INCH
78.00
DIAL BORE GAGE
31.25
DIAL CALIPERS: UP TO 12 INCH
23.25
DIAL CALIPERS: 13 TO 24 INCH
28.00
DIAL CALIPERS: 25 TO 36 INCH
45.00
DIAL CALIPERS: 37 TO 48 INCH
56.00
DIAL CALIPERS: 49 TO 72 INCH
56.00
DIAL CALIPERS: 73 TO 100 INCH
85.00
DIAL INDICATOR: SINGLE SCALE
23.25
DIAL INDICATOR: DUAL SCALE
28.00
DIAL INDICATOR TRANSDUCER
45.00
DIE GAGE
10.75
DIGITAL BORE INDICATOR
31.25
DIGITAL CALIPERS: UP TO 12 INCH
23.25
DIGITAL CALIPERS: 13 TO 24 INCH
28.00
DIGITAL CALIPERS: 25 TO 36 INCH
45.00
DIGITAL CALIPERS: 37 TO 48 INCH
56.00
DIGITAL CALIPERS: 49 TO 72 INCH
56.00
DIGITAL CALIPERS: 73 TO 100 INCH
85.00
DIGITAL INDICATOR
31.25
DIGITAL LENGTH STANDARD
100.00
DIGITAL LEVEL
31.25
DIGITAL MICROMETER
22.80
DIGITAL MICROMETER + STANDARD
28.30
DIGITAL PROTRACTOR
31.25
16.75
GO/NOGO GAGE: EACH MEMBER NONTHREADED
10.75
GO/NOGO THREAD PLUG GAGE (2
MEMBERS)
31.00
HALL-EFFECT THICKNESS GAGE
50.00
MICROMETER: EACH ADDITIONAL ROD
5.25
HARDNESS INDENTER
45.00
MICROMETER: HEAD
22.80
HARDNESS STANDARD
31.25
10.50
HARDNESS TESTER
145.00
MICROMETER STANDARD: UP TO 12
INCH, EACH
MICROMETER STANDARD: 13-24 INCH,
EACH
23.00
H
MAGNETIC BLOCK
31.25
MASTER RING GAGE: UP TO 6 INCH
27.50
MASTER RING GAGE: 7 TO 12 INCH
40.00
MASTER RING GAGE: 13 TO 18 INCH
51.50
MICROMETER
22.80
ELECTRONIC INDICATOR
23.25
HARDNESS TESTER: TEST BLOCK
31.25
ELECTRONIC THICKNESS GAGE
50.00
HEIGHT GAGE: 1-12 INCH
40.00
ENCODER
23.25
HEIGHT GAGE: 13-18 INCH
46.00
MICROMETER STANDARD: 25-48 INCH,
EACH
34.00
EXTENSOMETER
150.00
HEIGHT GAGE: 19-24 INCH
53.00
MICROMETER: DEEP THROAT, I.D., & O.D.
22.80
HEIGHT GAGE: 25-30 INCH
60.00
HEIGHT GAGE: 30-40 INCH
66.00
MICROMETER, DEEP THROAT: EACH
ADDITIONAL ROD
5.25
HEIGHT GAGE: MASTER, CADILLAC
82.00
MICROMETER: OPTICAL
55.00
HEIGHT MASTER
82.00
MU-GAGE
46.00
HEIGHT PROBE
43.00
F
FAILED OR AS FOUND REPORT,
INCLUDED WITH CAL
FARO ARM
FREE
125.00
FEELER GAGE: PER LEAF
2.85
FILLET GAGE SET
31.25
FLATNESS CHECK
27.50
G
I
I.D. MICROMETER, SINGLE ROD < 13 IN
NDT STANDARD
36.25
NOGO THREAD PLUG GAGE (ONE
MEMBER)
16.75
NOGO/GO THREAD PLUG GAGE (TWO
MEMBERS)
31.00
NUTRUNNER
86.00
44.00
I.D. MICROMETER: MULTIPLE RODS
22.80
GAGE BLOCK INDIVIDUAL: 0-4 INCH
EACH BLOCK
15.75
I.D. MICROMETER: EACH ADDITIONAL
ROD
5.25
GAGE BLOCK INDIVIDUAL: 5-20 INCH
EACH BLOCK
17.00
IGNITOR PLUG GAGE
23.25
GAGE BLOCK SET: 0-4 INCH EACH
BLOCK, 9 PC MIN
IIW BLOCK
145.00
2.75
GAGE BLOCK SET: 5-20 INCH EACH
BLOCK
17.00
GAGE PIN: EACH IN A SET
0.95
GAGE PIN WITH INDIVIDUAL
CERTIFICATION
10.75
GAGE, CHAMFER
31.25
INDICATORS (SEE DIAL OR DIGITAL INDICATOR)
43.50
GAGE, FILLET SET
31.25
GRANITE SQUARE
45.00
GLASTONBURY: 6 INCH MASTER
70.60
12 INCH MASTER
105.00
937-898-5696
INFANT MEASURING BOARD
L
31.25
O.D. MICROMETER
O
O.D. MICROMETER: EACH ADDITIONAL
ROD
22.80
5.25
O.D. MICROMETER + STANDARD
28.30
OPTICAL COMPARATOR
225.00
LASER LEVEL (NOT SITE)
31.25
OPTICAL FLAT
43.50
LASER MICROMETER
280.00
OPTICAL JIG TRANSIT
70.60
LASER RANGE METER
31.25
OPTICAL MICROMETER
55.00
LASER/SITE LEVEL
70.60
LASER TRANSDUCER
45.00
LEVEL: BUBBLE OR DIGITAL
31.25
LEVEL: SITE
70.60
11601 N. Dixie Dr, Tipp City, OH 45371
PADDLE GAGE
P
22.80
PARALLELISM
23.25
PARALLELS PER PAIR
23.25
www.ttlcal.com
Popular
Certifications
NICROPRESS CRIMPER
I.D. MICROMETER, SINGLE ROD > 12 IN
INCLINOMETER
31.25
22.80
125.00
GAGE AMPLIFIER
N
Popular
Certification
E
M
GO OR NOGO THREAD PLUG GAGE
(ONE MEMBER)
15
d
is
OR BETTER GUARANTEED*
16
PIN GAGE: INDIVIDUAL CERTIFICATION
FOR EACH (SOME EXCEPTIONS APPLY)
10.75
PLASTIC THICKNESS GAGE
23.25
PLUG GO GAGE: NON THREADED
10.75
PLUG NOGO: NON THREADED
10.75
PLUG GO/NOGO GAGE: NON
THREADED
S
SETTING RING, GAGE
27.50
SHADOW GAGE
23.25
SIEVE
40.00
SINE BAR
42.00
SITE LEVEL
70.60
SKIN WAVENESS KIT
150.00
21.50
SNAP GAGE GO/NOGO
26.25
POCKET MICROMETER
23.25
SNAP RING GAGE MASTER
28.00
POCKET THICKNESS GAGE
23.25
SPHERE
27.50
PRECISION LEVEL
31.25
SPINDLE MICROMETER
31.50
PRECISION SQUARE
28.00
SQUARE PRECISION
28.00
PROFILE GAGE
23.25
STAGE MICROMETER
100.00
PROFILOMETER
101.00
STANDARDS: UP TO 12 INCH
10.50
PROFILOMETER TEST PATCH EACH
45.00
STANDARDS: 13-24 INCH
23.00
PROPELLER PROTRACTOR
31.25
STANDARDS: 25-48 INCH
34.00
PROTRACTOR: BEVEL
31.25
STANDARDS: 49-80 INCH
PROTRACTOR: BUBBLE
31.25
PROTRACTOR: DIGITAL
31.25
PROTRACTOR/RULER/SQUARE
COMBINATION SET
62.00
PROVING RING
98.00
R
RADIUS GAGE EACH POINT
2.85
RADIUS GAGE: 1 POINT
2.85
RADIUS GAGE: TWO POINTS
3.25
RADIUS GAGE: THREE POINTS
3.75
RADIUS GAGE: FIVE POINTS
4.50
REAMER
12.00
REFRACTOMETER
39.00
REPEATOMETER
THICKNESS GAGE (ULTRASONIC)
50.00
THICKNESS TESTER
50.00
THREAD MEASURING WIRES: 3 WIRE SET
20.00
THREAD PITCH GAGE EACH SIZE
2.85
THREAD PLUG: EXCEPT NPT, GO GAGE
16.75
THREAD PLUG: EXCEPT NPT, NOGO
GAGE
16.75
THREAD PLUG: (NPT)
31.00
THREAD PLUG GAGE (2 MEMBERS)
31.00
THREAD RING: GO GAGE, PASS/FAIL
23.25
THREAD RING: NOGO GAGE, PASS/FAIL
23.25
THREAD WIRES, 1 SET (3 WIRES)
20.00
TILT AND TURN TABLE
82.00
TRAVEL BOARD
82.00
TURBINE STRETCH INDICATOR
225.00
50.00
ULTRASONIC FLAW DETECTOR
105.00
STANDARD TEST PATCH
45.00
ULTRASONIC STEP BLOCK
23.25
STANLEY COMPULEVEL
31.25
ULTRASONIC TESTER/THICKNESS
50.00
STEEL SCALE
23.25
ULTRASONIC THICKNESS GAGE
50.00
STRAIGHT EDGE
23.25
UMG
150.00
SUPER MICROMETER
150.00
UNIVERSAL BUBBLE PROTRACTOR
31.25
SURFACE PLATE <= 2X3 FT.
45.00
SURFACE PLATE: EACH ADDITIONAL
144 SQ. IN. > 2X3 FT.
6.00
SURFACE ROUGHNESS GAGE
101.00
SURFTEST
101.00
SURVEILLANCE MASTER UP TO 6 INCH
70.60
SURVEILLANCE MASTER 6 TO 12 INCH
105.00
23.25
TAPE MEASURE UP TO 12 FT.
20.00
RING GAGE, THREAD PASS/FAIL
23.25
1.00
RING GAGE: UP TO 6 INCH
27.50
TAPE MEASURE: EACH FOOT OVER 12
FEET
RING GAGE: 7 TO 12 INCH
40.00
RING GAGE: 13 TO 18 INCH
51.50
ROTARY ENCODER
40.00
ROUGHNESS STANDARD PER PATCH
45.00
RULER: UP TO 48 INCH
23.25
RULER: EACH FOOT OVER 4 FEET ADD
5.00
T
TAPER GAGE
27.50
TCOMP
155.00
TELESCOPING GAGE SET
23.25
TEST PATCH, PROFILOMETER
45.00
TEST SIEVE
40.00
THERMACOMP
155.00
THICKNESS COATING GAGE
50.00
THICKNESS GAGE (MECHANICAL)
50.00
U
Popular
Certifications
FIVE DAY TURNAROUND
0.95
Popular
Certifications
r e dite
34.50
PIN GAGE SET: INDIVIDUAL PRICE
Popular
Certifications
cc
A
5
o 1702
PI TAPE
V-BLOCK: 1 SIDE
V
44.00
V-BLOCK: 2 SIDED
70.00
VERNIER CALIPERS: UP TO 12 INCH
23.25
VERNIER CALIPERS: 13 TO 24 INCH
28.00
VERNIER CALIPERS: 25 TO 36 INCH
45.00
VERNIER CALIPERS: 37 TO 48 INCH
56.00
VERNIER CALIPERS: 49 TO 72 INCH
56.00
VERNIER CALIPERS: 73 TO 100 INCH
85.00
VERNIER HEIGHT GAGE: 12 INCH
40.00
VERNIER HEIGHT GAGE: 18 INCH
46.00
VERNIER HEIGHT GAGE: 24 INCH
53.00
VERNIER HEIGHT GAGE: 30 INCH
60.00
WELDER LOAD VOLTMETER
44.00
WELDER LOAD AMPMETER
44.00
WELDER WIRE FEED RATE
12.00
WELD FILLET GAGE SET
31.25
WHEEL SECTION INSPECTION
87.75
WIRE LENGTH METER
23.25
WIRE STRIPPER
40.50
WINDSHIELD STANDARD
31.25
Z-MICROMETER
280.00
W
Z
Hassle-free Certification: Avoid the hassle
of certifying your own tools. With no RMA
required, we keep it simple when sending in
your tools. Just list it and ship it with a P.O.
and you will be notified of the tools received.
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
17
Did you know?
We can perform limited certifications, at your
request, on many different tools.
FLOW
Our capabilities are continuing to grow... Please don’t hesitate to ask about a tool that is not shown.
A
d
is
OR BETTER GUARANTEED*
18
225.00
FLOWMETER: 1 TO 50 GPM
98.00
FUEL PORTA TEST UNIT
400.00
150.00
AIR FLOWMETER: 1700 TO 3200 LPM
225.00
AIR GAGE
75.00
ANALYZER, GAS
150.00
ANEMOMETER
75.00
GAS ALARM, SNIFFER SINGLE GAS
75.00
ANEMOMETER-THERMO
110.00
GAS ANALYZER
150.00
BALL FLOWMETER <= 50 LPM
98.00
BALL FLOWMETER: 51 TO 1699 LPM
150.00
BALL FLOWMETER: 1700 TO 3200 LPM
225.00
CHLORINE METER
75.00
C
150.00
DETECTOR, GAS, SNIFFER SINGLE GAS
75.00
DIGITAL FLOW METER
140.00
F
FLOWMETER TEST BOX, FLOW, PRESS,
TEMP
225.00
FLOWMETER: <= 50 LPM
98.00
FLOWMETER: 51 TO 1699 LPM
150.00
FLOWMETER: 1700 TO 3200 LPM
225.00
FLOWMETER: <= 1.8 CFM
98.00
FLOWMETER: 1.81 TO 60 CFM
150.00
FLOWMETER: 60 TO 160 CFM
225.00
FLOWMETER: <= 108 CFH
98.00
FLOWMETER: 109 TO 3600 CFH
150.00
FLOWMETER: 3600 TO 9600 CFH
225.00
Popular
Certifications
A
5
FIVE DAY TURNAROUND
150.00
FLOWMETER: 1700 TO 3200 LPM
AIR FLOWMETER: 51 TO 1699 LPM
D
r e dite
FLOWMETER: 51 TO 1699 LPM
98.00
COMBUSTION ANALYZER
cc
98.00
AIR FLOWMETER: <= 50 LPM
B
o 1702
FLOWMETER BALL: <= 50 LPM
G
GAS DETECTOR, SNIFFER SINGLE GAS
75.00
GAS INDUSTRIAL METER
425.00
GAS MONITOR, SNIFFER SINGLE GAS
75.00
GPM FLOWMETER
98.00
GRADUATED CYLINDER
24.00
HYDROMETER
75.00
H
L
LEAKAGE DETECTOR
LEAKAGE TEST
M
75.00
71.00
MEASURING VESSEL OR CUP
24.00
OXYGEN FLOWMETER
140.00
TURBINE FLOWMETER
VISCOSITY CUP
O
T
V
W
WEATHER STATION, REMOTE
140.00
50.00
125.00
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
19
Did you know?
Tool Testing Lab has been calibrating tools for
over 25 years.
PRESSURE
We are known for our high quality pressure assemblies. See them on page 22.
A
79.75
AIR CONDITIONER MANIFOLD
79.75
AIR DATA MULTIMETER
395.00
AIR DATA TEST SET, 3 ANALOG INST.
325.00
AIR DATA TEST SET, DIGITAL ALTIMETER,
AIRSPEED, & VSI
395.00
AIR DATA TEST SET, ALTIMETER,
AIRSPEED, & VSI W/ RVSM
425.00
AIRSPEED INDICATOR
99.50
ALPHATRON WIRE PULL TESTER
108.00
B
BAROMETER, HIGH ACCURACY
57.75
BAROMETER, HIGH ACCURACY &
TEMPERATURE
110.00
BAROMETER, TYPICAL ACCURACY
31.75
45.00
DIFFERENTIAL CYLINDER TESTER +
ORIFICE
63.50
DIGITAL MANOMETER
57.75
DIGITAL PRESSURE GAUGE: 0-400 PSI
31.75
DIGITAL PRESSURE GAUGE: 401-999 PSI
36.50
DIGITAL PRESSURE GAUGE: 1000-5000
PSI
43.00
DIGITAL PRESSURE GAUGE: 5001-9999
PSI
49.75
DIGITAL PRESSURE GAUGE: 10000-15000
PSI
70.75
DIGITAL PRESSURE GAUGE W/
ACCURACY UNDER 1% ADD
26.00
H
HEISE PRESSURE GAUGE
45.00
HIGH ACCURACY PRESSURE GAUGE:
COMBINATION DUAL GAUGE, XX-0-XX
PSI
72.50
175.00
HIGH ACCURACY: OXYGEN GAUGE
CLEANING
26.00
CALIBRATOR: 1000 TO 16000 PSI SINGLE
RANGE
225.00
HIGH ACCURACY PRESSURE GAUGE:
0-400 PSI
57.75
CHART RECORDER, LOW PRESSURE
105.00
CHART RECORDER, HIGH PRESSURE
115.00
HIGH ACCURACY PRESSURE GAUGE:
401-999 PSI
62.50
COMBINATION VACUUM-PRESSURE
GAUGE
48.00
HIGH ACCURACY PRESSURE GAUGE:
1000-5000 PSI
69.00
COMBINATION VACUUM-PRESSURE
GAUGE / HA
72.50
HIGH ACCURACY PRESSURE GAUGE:
5001-9999 PSI
HIGH ACCURACY PRESSURE GAUGE:
10000-15000 PSI
C
CALIBRATOR: .2 TO 1000 PSI SINGLE
RANGE
D
20
110.00
DIFFERENTIAL CYLINDER TESTER
DEAD WEIGHT CALIBRATOR, INCLUDE
WEIGHTS
404.75
DECAY HEATER TESTBOX
105.00
F
FUEL NOZZLE TESTER
Popular
Certifications
AIR CONDITIONER FREON TEST
GAUGES
DECAY PRESSURE KIT
H
115.00
HASTINGS VACUUM GAUGE
96.00
HEATER DECAY TESTER
85.00
HIGH PRESSURE REGULATOR
85.00
HIGH PRESSURE STATIC TEST
49.75
HYDRAULIC PRESS GAUGE
70.75
HYDRAULIC TEST BOX, FLOW, PRESS,
TEMP
140.00
MAGNEHELIC PRESSURE GAUGE
31.75
MANOMETER
31.75
MANOMETER / HIGH ACCURACY
57.75
M
MERCURY PRESSURE GAUGE
31.75
MICO QUADRIGAGE
106.50
MULTI-RANGE PRESSURE CALIBRATOR
325.00
NITROGEN PRESSURE REGULATOR
85.00
ORIFICE TOOL
22.25
N
O
OUTFLOW VALVE TESTER
225.00
OXYGEN CLEANING
26.00
OXYGEN PRESSURE REGULATOR
85.00
75.75
PITOT-STATIC TESTER, ALTIMETER &
AIRSPEED
225.00
96.75
PITOT-STATIC TESTER, ANALOG
ALTIMETER, AIRSPEED & VSI
325.00
PITOT-STATIC TESTER, DIGITAL
ALTIMETER, AIRSPEED & VSI
395.00
PITOT-STATIC TESTER, ALTIMETER,
AIRSPEED & VSI W/ RVSM
425.00
FLUKE PRESSURE GAUGE MODULE
70.60
FORCE GAGE
71.00
P
105.00
PRESSURE GAUGE: 0-400 PSI / 0-27 BAR
31.75
PRESSURE GAUGE: 401-999 PSI / 28-68
BAR
36.50
PRESSURE GAUGE: 1000-5000 PSI / 69-344
BAR
43.00
PRESSURE GAUGE: 5001-9999 PSI / 345688 BAR
49.75
PRESSURE GAUGE: 10000-15000 PSI /
689-1034 BAR
70.75
PRESSURE GAUGE: COMBINATION
DUAL GAUGE, XX-0-XX PSI
48.00
PRESSURE GAUGE W/ ACCURACY
UNDER 1% ADD
26.00
PRESSURE GAUGE: OXYGEN GAUGE
CLEANING
26.00
PRESSURE TESTER
105.00
PRESSURE TRANSDUCER
85.00
PRO SERIES TIRE KIT
63.50
PROOFMASTER KIT
108.00
QUADRIGAGE
Q
R
70.75
RATE OF CLIMB
99.50
RELIEF VALVE 0-400 PSI
32.00
SETRA PRESSURE GAUGE
205.00
STATIC TEST- LOW PRESSURE
36.50
STRUT INFLATION GAUGE
43.00
TIRE GAUGE
31.75
TIRE INFLATION TOOL
T
ULTRA HIGH PRESSURE REGULATOR
90.00
VACUUM & PRESSURE COMBINATION
GAUGE
48.00
VACUUM & PRESSURE COMBINATION
GAUGE/HA
72.50
VACUUM GAUGE
31.75
VACUUM PRESSURE MODULE
55.00
VERTICAL SPEED INDICATOR
99.50
WATER GAUGE
31.75
V
W
106.50
RAM GAUGE, HYDRAULIC PRESS
S
U
Popular
Certifications
PRESSURE CALIBRATOR 0-1000 PSI
31.75
Custom
When it comes to checking pressure, we understand
the importance of safety and precision. Our line of
TTL tire gauges are built with the aviation technician in
mind. If you need something custom made, then we will
make it happen. With our variety of parts and assembly
options, we can create the perfect gauge for you to use
for many years to come.
Visit www.ttlcal.com and click on pressure assemblies.
21
Choose from one of our pre-built gauges or
customize your own.
TTL-300-ATI
✓
✓
✓
✓
✓
✓
✓
✓
300 psi
2 psi resolution
1.6% FS accuracy
Locking tire chuck
Bleeder valve
Blowoff valve for operator safety
Inflation control lever
Case included
Inflate your tires with confidence.
TTL-3000-ASG
✓
✓
✓
✓
✓
✓
✓
✓
3000 psi
1.6% FS accuracy
Heavy duty
Strut fitting
Soft seat valve
Air bleed valve
Protective boot
Case included
Built Job
Ready.
Great for pressure gauges
and other small tools!
TTL-300-DTI
✓
✓
✓
✓
✓
✓
✓
✓
300 psi
0.1 psi resolution
0.5% FS accuracy
Locking tire chuck
Bleeder valve
Blowoff valve for operator safety
Inflation control lever
Case included
Carrying Case
Durable construction
Affordable
Large handles
Made of rugged polypropylene
Stratch resistant
Safely store your special tools
in the foam padded case
✓ All cases are black with two
pad-lock tabs for security
✓
✓
✓
✓
✓
✓
300 psi
0.1 psi resolution
0.5% FS accuracy
Includes Tire tread gauge
Dual and straight chuck
Quick Connect
Protective boot
Case included
Everything
you need
for checking
pressure
accurately.
PLE-240
HOS-HFH8CP
HOS-HFB23
HAL-H5265
TTL-300-DTG
✓
✓
✓
✓
✓
✓
✓
✓
✓
22
300 psi
0.1 psi resolution
0.5% FS accuracy
Backlit
Peak hold
Tracking mode
Bleeder valve
Protective boot
Case included
Precision at it’s best.
PLE-711-100
RUGGED
LOCKABLE
300 psi
2 psi resolution
1.6% FS accuracy
Heavy duty
Protective boot
Case included
DWY-A-183
TTL-021-0002.1
AIR-5652-4
MTM-805-40
10.1x8.0x3.2
9.7x5.7x2.8
MTM-807-40
13.1x9.7x3.2
12.5x8.1x3.0
MTM-809-40
15.5x12.2x3.6
14.7x10.6x3.3
MTM-811-40
15.5x12.2x5.6
14.7x10.6x5.3
INSIDE
DIMENSION
Customizable
Need more hose length, or maybe a
different fitting? If our assemblies are not
exactly what you need, you can customize
it with the parts listed.
LEN-4ABV-T
PLE-127-BK
GOO-NC-04-300-BLUE
GOO-NC-04-300-BLACK
CIR-2259B
HAL-322
TTL-300-ATG
✓
✓
✓
✓
✓
✓
OUTSIDE
DIMENSION
(INCHES)
809-40
807-40
TTL-300-DTG-K
✓
✓
✓
✓
✓
✓
✓
✓
MODEL
NUMBER
PLE-6566-FT-BK
KER-N5532
HAL-H6116B
DESCRIPTION
P/N
6” Large bore
dual foot tire
chuck
HAL-322
6” Dual foot tire
chuck
PLE-6566-FT-BK
1/4” Black hose
rated 300 psi
GOO-NC-04-300-BLACK
1/4” Blue hose
rated 300 psi
GOO-NC-04-300-BLUE
Blue rubber boot
for analog gauge
TTL-021-0002.1
Black rubber boot
for digital gauge
DWY-A-183
Clip-on tire chuck
HAL-H5265
Lever Valve
PLE-240
Female quick
disconnect
HOS-HFB23
Male quick
connect
HOS-HFH8CP
Bleed valve
PLE-711-100
Check valve
CIR-2259B
Free flow straight
chuck
PLE-127-BK
Air bleed valve
LEN-4ABV-T
1/4” Soft seat
valve
KER-N5532
1/4” Pipe cross
AIR-5652-4
Strut fitting
HAL-H6116B
TOOL TESTING LAB, INC.
TERMS AND CONDITIONS
Tool Testing Lab, Inc. is referred to herein as
“TTL”. The Customer’s acceptance of the products or
services provided by TTL shall agree to the following
terms and conditions.
1. Record Keeping - TTL will maintain records of
calibration and repair history for 5 years minimum in
our database system.
2. Pricing - TTL agrees to maintain the quoted
calibration service pricing for the term of a purchase
order and/or service contract, provided that a firm
purchase order and/or contract for the work quoted is
received within thirty (30) days of the quote date.
3. Calibration Intervals - Calibration intervals will default
to one year, and can be set to any interval requested. Interval
determined by our customer.
4. Payment Terms - Invoices are payable within thirty (30) days
from their date. Finance charges of 1.5% monthly may be added if not
paid when due.
5. Sales Taxes – Ohio sales tax will be collected on work shipped to an Ohio
location, unless a tax exemption form is on file.
6. Transportation and Risk of Loss - Unless otherwise stated by TTL,
delivery of products shall be F.O.B. point of shipment and transportation
expenses shall be paid by the Customer. Risk of loss passes to the Customer
at the point of shipment.
7. Warranty - TTL warrants all repairs & calibration made to be free from
defects in material or workmanship under normal use and service for a period
of ninety (90) days from the date of shipment to the Customer. TTL will
repair or calibrate warranty equipment at no charge if such item is returned to
Company’s facility at the Customer’s expense.
8. Limitation of Warranty and Liability - The liability of TTL (except as to
title) shall in no case exceed the cost of correcting defects in products or
calibrations and shall not extend beyond one (1) year from date of shipment.
TTL assumes no liability for the consequences of misuse of products by the
Customer. The foregoing is TTL’s only obligation and the Customer’s only
remedy for breach of warranty. Except for gross negligence, willful misconduct,
and remedies permitted under any other clause of these Terms and Conditions,
the foregoing is the Customer’s only remedy hereunder by way of breach
of contract, negligence or other tort, or otherwise. In no event shall the
Customer be entitled to incidental, special or consequential damages.
9. Discrepancies in Shipment and Damage to Merchandise - Products
distributed by TTL are carefully packed and thoroughly inspected before
leaving TTL’s facility. Any claim for discrepancies will be honored only if
reported within fifteen (15) days from receipt of shipment. $3.00 storage
charged monthly per tool not picked up or shipped 30 days prior certification.
10. Acceptance of Terms and Conditions - Acceptance of the terms and
conditions herein is an essential prerequisite to any contract of sale made by
the seller. No condition stated by the Customer in its offer or acceptance
shall be binding upon the seller if in conflict with, inconsistent with, or in
addition to the terms and conditions contained herein. Acceptance of any
good or service manufactured and /or delivered hereunder shall constitute
purchaser’s agreement to said terms and conditions.
11. Safety - TTL reserves the right to refuse to carry out any work, which, in
TTL’s opinion, would be hazardous.
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
PRICING
Any tool received in our lab and does not require repair will be CERTIFIED
IN MAXIMUM 5 WORKING DAYS, or you will not be Charged for the
certification. TTL reserves the right to, with documented evidence; modify
pricing quoted in error, or where the requirements of the work have
necessitated a substantial change in manpower or equipment requirements.
Additional equipment may be added at any time during the duration of the
contract. Equipment may be deleted from the agreement with written notice
from the Customer prior to the date of calibration under the agreement.
We have a flat rate per tool cost, that will cover adjustment, certification and
complete test data information. This will give you the benefit of knowing
your cost in advance, without waiting on time consuming quotes or receiving
a higher dollar invoice than expected. Any repairs required are an additional
charge.
On-Site Work Flow - When work is performed at a Customer’s site, it is the
responsibility of the Customer to have instruments available to facilitate steady
work-flow. TTL requests the Customer’s cooperation in providing the on-site
technician(s) with an environmentally controlled area to perform calibrations
and to stage instruments. This area must have proper lighting and electrical
service as well as adequate space to set up our computer(s) and printer(s).
On-Site Pricing - A signed agreement is required prior to scheduling on-site
work. A dedicated work area may be required depending on the type of
equipment. Minimum on-site charge is $100 per technician per hr. plus travel
charges and expenses for meals and lodging if overnight stay is required. If
travel and labor time exceeds 12 hours, overnight stay is required. All tools
certified after an 8 hr. work day and weekends, will be charged at 150% of the
standard flat rate charge. Meals and lodging will be charged at actual costs.
Travel expense is based on a round trip zone charge from our laboratory in
Tipp City, Ohio. Travel time on weekends will be at 150% of the zone charge.
Equipment Evaluation Pricing - If a unit is sent in for tool calibration, but
is found to need repair and is beyond economical repair, we will offer a
no charge evaluation. If we are unable to repair and certify the tool and a
complete fail report including data is required, we will charge for this report.
Equipment Expedite Pricing - Expediting a certification has an additional
surcharge as follows: Same day has 25% surcharge per item. Tool must be at
TTL by 9 AM ET in order to ship same day. Next day has a 10% surcharge
per item. We have up to 24 HR to complete certification for next day service.
Holiday or weekend has a 100% surcharge per item.
STANDARDS AND PRACTICES
The service level, with data and uncertainties, is to be determined on a per
item basis. A calibration certificate with traceability information will be
provided. All work will be performed in accordance with TTL’s Quality System.
And will include:
• All calibration standards will be traceable to SI units through NIST, or to
other recognized national or international bodies or physical constants.
• All calibration processes will have a minimum of 4:1 Test Uncertainty Ratio
(TUR). If less than 4:1, the actual T.U.R will be noted.
• Calibration work will be performed by trained technicians.
• TTL will monitor and report the temperature and relative humidity under
which the calibration work is performed
• Batteries will be replaced if under their stated voltage.
• If repairs are required prior to performing the calibration, an estimate of
time and cost will be provided
• A sticker will include the calibration date, due date, and initials of the
technician. Tamper-resistant seals will be applied where appropriate.
• A certificate of calibration will be supplied for each calibrated instrument.
• For items received in an out-of-tolerance condition, a separate out-oftolerance notification will be provided. The out-of-tolerance report will
identify the instrument, and include as-found data for any parameters found
in an out-of-tolerance condition.
• Calibration recall notification will be provided for each device prior to the
calibration due date.
For additional information please check our web site at www.ttlcal.com
or call 937-898-5696.
www.ttlcal.com
23
Help us process your tools fast by
providing the following info:
✓
✓
✓
✓
✓
✓
✓
✓
✓
P.O. number or name
Contact info (new customer form is on our website)
Return address
Email (for tool notifications)
Method of shipping (ground, next day air, ect.)
Shipping account number (if applicable)
List tools or indicate how many (we will verify that they match)
Please note “expedite” if applicable (same day or next day service)
Note repair concerns
Accepted
Payment Terms:
Wire Transfer
Credit Card
Check
Cash
© 2015 Tool Testing Lab, Inc.
937-898-5696
11601 N. Dixie Dr, Tipp City, OH 45371
www.ttlcal.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement