thermometers - Ace Industrial Supplies

thermometers - Ace Industrial Supplies
PROFESSIONAL
THERMOMETERS
FOR CATERING & FOOD PROCESSING
CATERING THERMOMETERS
Catering Thermometers
& thermometer accessories
Since our launch in1983 Ace Industrial Supplies Ltd has
developed a reputation as supplier of quality and value for
money instrumentation.
Product Warranty & Guarantee
All ETI manufactured instruments carry a two year warranty/
guarantee against defects in either components or workmanship.
During this period, products that prove to be defective will, at
the discretion of ETI, be either repaired or replaced without
charge. Instruments that have not been manufactured by ETI
will be subject to a warranty period of twelve months. Such
warranties do not apply to probes, where a six month period
is offered. This six month period also applies to a probe where
it is an integral part of the instrument.
The product warranty/guarantee does not cover damage
caused by fair wear and tear, abnormal storage conditions,
incorrect use, accidental misuse, abuse, neglect, misapplication
or modification, or use with non-ETI hardware/software. The
user should make themselves aware of the proper use of
measurement equipment, including maintenance, calibration,
and comparison with other instruments.
In line with our policy of continuous development, we
reserve the right to amend our product specification without
prior notice.
Quality
ETI’s Quality Management System is assessed to ISO
9001:2008 by the British Standards Institution. As part of
our policy of continuous product development we reserve
the right to change specifications at any time.
How to Order
Our simple ordering procedure allows you to place your
order with the utmost of ease.
You may order by: phone, fax, or e-mail.
Tel: 01580 891300 Fax: 01580 891350
e-mail: [email protected]
If you are not an account customer, you may pay by VISA,
DELTA, MASTERCARD or MAESTRO. If you wish to open
an account please ask for an account application form.
We can confirm prices and delivery from your enquiry, and
providing goods are in stock, next day delivery by our own
transport or courier can normally be made.
Prices are subject to VAT. Claims for short delivery or damage
must be advised in writing within 2 days, non-delivery must
be advised in writing within 14 days of invoice date.
All prices quoted are exclusive
of carriage and VAT at the
standard rate.
www.aceindustrial.co.uk
2
email: [email protected]
Spotlight for 2014
Thermapen® with
Pro-Surface Probe
p5
TempTest® 1 & 2
Smart Thermometers
p7
p8
Budget Sous Vide
Thermometer Kit
p19
S/Steel ThermaData®
Loggers - NEW Models
p26
ThermoPop®
Thermometer
p27
Fridge or Freezer
Thermometers
p31
ChefAlarm® cooking
Thermometer & Timer
p35
Anti-bacterial
Probe Wipes
description
page no.
accessories ____________________________38
CaterTemp® thermometer ________________11
CaterTemp® Plus waterproof thermometer ___11
ChefAlarm® thermometer & timer __________35
colour coded thermometers________ 5-6, 9, 29
Combo infrared thermometer _____________23
cooking thermometers ___________________37
data-loggers ________________________24-26
dial thermometers________________ 32, 36-37
dishwasher safe thermometer _____________30
DTR - Data Temperature Recorder _________14
EcoTemp® thermometer __________________28
Food Check thermometer _________________ 9
fridge or freezer thermometers _________31-33
frying thermometer ______________________37
Gourmet thermometer ___________________29
infrared thermometers ________________22-23
kits _______________________________18-19
log books _____________________________38
meat thermometers _____________________37
milk frothing dial thermometers ____________37
Multi-function thermometer _______________28
oven thermometers ___________________35-36
pocket-sized thermometers ____________29-30
probes - K thermocouple _________________17
probes - NTC thermistor _________________13
ProbeWipes ____________________________39
RayTemp® infrared thermometers ______ 22, 23
Reference® Thermapen __________________20
Reference® thermometers_________________22
Saf-T-Log® thermometer __________________15
Sous Vide thermometer kits _______________19
TempTest® 1 & 2 thermometers ___________ 7-8
Therma 1, 3 & Elite thermometers _________16
Therma 20 thermometer _________________12
ThermaCheck/Plus thermometers __________10
ThermaData® loggers ________________24-26
ThermaLite® thermometers_________________ 6
Thermamite® thermometer_________________ 9
Thermapen® thermometers __________ 4-5, 20
thermistor test caps______________________12
ThermoPop® thermometer ________________27
timers ______________________________34-36
UKAS Temperature Calibration ____________21
UniWipes______________________________39
waterproof thermometers ___7-8, 10-11, 27, 30
CONTENTS
NEW Products &
p39
fax: +44 (0) 1580 891350
tel: +44 (0) 1580 891300
3
CATERING THERMOMETERS
SuperFast Thermapen®
digital thermometer
z over 50 % faster response than traditional probes
z reaches temperature in just three seconds
reduced tip for fast response
z FREE traceable certificate of calibration
zwater resistant case
The SuperFast Thermapen thermometer incorporates
a large digital display with a precise read-out of
temperature over the range of -49.9 to 299.9 °C with
a 0.1 °C resolution and an accuracy of ±0.4 °C.
The resolution can be switched to 1 °C, if required, via
a switch in the battery compartment. The thermometer will
power off automatically after ten minutes, maximising
battery life. This feature can be disabled if not required.
The casing is washable and includes 'Biomaster' additive
that reduces bacterial growth and the ergonomic rubber seal
minimises the risk of the ingress of water, dust or food. As well
as being water resistant, it is still 'probably' the fastest reading
contact thermometer on the market today. The true temperature
of a product can be tested in just three seconds.
Both low battery (icon) and open circuit indication are displayed, when applicable. Each Thermapen
is powered by two lithium coin cell batteries with a minimum life expectancy of 1500 hours.
reduced tip, foldaway probe
The Thermapen incorporates a reduced tip, stainless steel, food penetration probe Ø3.3 x 115 mm, that
conveniently folds back through 180 degrees into the side of the instrument when not in use.
optional accessories
z zip
pouch with belt strap (830-001)
z protective
PVC wallet with belt strap (830-110)
z protective
silicone boot (830-260)
z acrylic
wall bracket (832-200)
z glow
in the dark protective silicone boot
with magnets (830-265)
°C
AUTO
OFF
HACCP
COMPATIBLE
specification
SuperFast Thermapen
range
-49.9 to 299.9 °C
resolution
0.1 °C or 1 °C - user selectable
accuracy
±0.4 °C (-49.9 to 199.9 °C) otherwise ±1 °C
battery
2 x 3 volt CR2032 lithium coin cell
battery life
1500 hours
sensor type
K thermocouple
display
14.3 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
FREE traceable certificate of calibration included
4
www.aceindustrial.co.uk
email: [email protected]
to avoid cross-contamination
The SuperFast Thermapen is available in ten colours, ideal for many different
applications. These colour-coded Thermapens can be part of your HACCP and
due diligence procedures, being used for different food types or preparation
areas, reducing the risk of cross-contamination. Alternatively, each member of
staff can be given a different coloured thermometer.
suggested uses
Below are just a few examples of the different uses for
the colour-coded SuperFast Thermapen thermometers.
zraw
meat
zcooked
meat
zsalad/fruit
products
zvegetable
products
zraw
fish/shellfish
z bakery/dairy
products
order code
231-217
231-227
231-237
231-247
231-257
231-267
231-277
231-287
231-297
231-307
830-260
830-265
830-110
830-001
832-200
description
Thermapen - white
Thermapen - yellow
Thermapen - green
Thermapen - red
Thermapen - blue
Thermapen - brown
Thermapen - black
Thermapen - orange
Thermapen - pink
Thermapen - purple
protective silicone boot
silicone boot - glow in dark
protective wallet
zip pouch
wall bracket
£ each
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
48.00
4.00
6.00
5.00
6.00
7.50
CATERING THERMOMETERS
Colour-coded Thermapen®
Thermapen®
with pro-surface probe
z pivoting probe & swivel tip for perfect contact
z temperature range -49.9 to 299.9 °C
The new Pro-Surface Thermapen thermometer measures the
temperature of grills, hotplates, and other surfaces over the
range of -49.9 to 299.9 °C with a user-selectable resolution
of 0.1 or 1 °C. The Pro Surface Thermapen is calibrated
"as a system" for improved accuracy.
Simply open the probe and take the reading - the pivoting
probe and swivel tip ensure perfect surface contact and high
accurate measurement. The Pro-Surface features the same
specification as the SuperFast Thermapen (see opposite
page) and includes a FREE traceable certificate of calibration.
optional accessory
protect your instrument against
high temperatures and accidental
damage by fitting a protective
silicone boot (830-260)
fax: +44 (0) 1580 891350
°C
AUTO
OFF
HACCP
COMPATIBLE
order code description
£ each
231-279
Thermapen Pro-Surface
64.00
830-260
protective silicone boot
4.00
830-110
protective wallet
5.00
FREE traceable certificate of calibration included
tel: +44 (0) 1580 891300
5
CATERING THERMOMETERS
ThermaLite® Thermometers
with assured accuracy for life
z temperature range -39.9 to 149.9 °C, with a high accuracy
z new reduced tip provides faster & more accurate readings
z ThermaLite 2 includes CalCheck 0.0 °C function
2012
z FREE traceable certificate of calibration
The ThermaLite digital thermometers display temperature over the range of
-39.9 to 149.9 °C with a 0.1 °C resolution and an accuracy of ±0.5 °C
(-39.9 to 124.9 °C). This accuracy is guaranteed for life, due to the
instruments advanced electronics. The ThermaLite 2 incorporates
a CalCheck, °C/°F and hold functions.
The thermometers weigh only 45 grams including battery, and feature
a clear, easy to read LCD display with an open circuit 'Err' and low
battery indication. The ThermaLite's auto-power off facility turns the
instrument off automatically after ten minutes, maximising battery life.
The thermometer is housed in a high impact ABS plastic case which
includes the 'Biomaster' additive that reduces bacterial growth,
ideal for routine day-to-day food and catering applications.
The Ø3.3 x 80 mm reduced tip, stainless steel, penetration
probe is ideal for measuring the temperature of food and
semi-solid materials. The ThermaLite is available in six colours,
suitable for different applications.
ThermaLite 2 with CalCheck function
The ThermaLite 2 features a CalCheck 0.0 °C function that allows
the user to verify the accuracy of the thermometer at any time,
giving confidence that measurements are accurate.
The
ThermaLite is waterproof to IP65 when used in
conjunction with the protective silicone boot (830-280)
6
order code
description
226-101
226-111
226-121
226-131
226-141
226-151
226-102
226-112
226-122
226-132
226-142
226-152
830-280
ThermaLite 1 - grey
ThermaLite 1 - white
ThermaLite 1 - yellow
ThermaLite 1 - green
ThermaLite 1 - red
ThermaLite 1 - blue
ThermaLite 2 - grey
ThermaLite 2 - white
ThermaLite 2 - yellow
ThermaLite 2 - green
ThermaLite 2 - red
ThermaLite 2 - blue
protective silicone boot
www.aceindustrial.co.uk
£ each
22.50
22.50
22.50
22.50
22.50
22.50
27.50
27.50
27.50
27.50
27.50
27.50
4.00
°C/°F
HOLD
AUTO
OFF
HACCP
Assured
Accuracy
COMPATIBLE
specification
ThermaLite 1 & 2
range
-39.9 to 149.9 °C
resolution
0.1 °C (0.1 °C/°F - ThermaLite 2)
accuracy
±0.5 °C (-39.9 to 124.9 °C)
battery
3 volt CR2032 lithium coin cell
battery life
3000 hours
sensor type
thermistor
display
10 mm LCD
dimensions
Ø29 x 196 mm
weight
45 grams
FREE traceable certificate of calibration included
email: [email protected]
with unique rotating display
z fast response probe, reaches temperature in just three seconds!
z patented, automatic 360° rotational display
z small compact, waterproof (IP67) design
z intelligent backlit display
The new TempTest 1 smart thermometer incorporates a large, easy to read digital
display, with a precise read-out of temperature over the range of -49.9 to 299.9 °C
with a 0.1 °C/°F resolution and an accuracy of ±0.4 °C (-49.9 to 200 °C). The
thermometer will power off automatically after ten minutes, maximising battery life.
This feature can be disabled.
The thermometer is housed in a waterproof IP67 case with an ergonomic rubber seal,
both include 'Biomaster' additive to reduce bacterial growth. As well as being waterproof,
it is 'probably' one of the fastest reading contact thermometers on the market today.
The true temperature of a product can be measured in just three seconds.
CATERING THERMOMETERS
TempTest® 1 Smart Thermometer
Both low battery (icon) and open circuit indication are displayed, when applicable.
Each TempTest 1 is powered by two AAA batteries with a minimum life expectancy of
5000 hours in normal use without the backlight.
Each thermometer is supplied with a permanently attached, pointed stainless steel
food penetration probe (Ø3.3 x 80 mm) with fast response tip.
automatic 360° rotational display
The TempTest 1 features an automatic 360° display, which rotates in 90° increments
enabling the user to read the temperature in any position ie. left hand, right hand,
vertical or horizontal. This feature can be 'locked' by the user, if required.
optional accessory
NEW protective silicone
boots are available in
various colours - see below
°C/°F
order code
221-910
830-431
830-432
830-433
830-434
830-435
830-437
description
£ each
TempTest 1 thermometer
50.00
protective silicone boot - white 4.00
protective silicone boot - yellow 4.00
protective silicone boot - green 4.00
protective silicone boot - red
4.00
protective silicone boot - blue 4.00
protective silicone boot - black 4.00
fax: +44 (0) 1580 891350
HOLD
MAX
MIN
AUTO
OFF
HACCP
COMPATIBLE
specification
TempTest 1
range
-49.9 to 299.9 °C
resolution
0.1 °C/°F
accuracy
±0.4 °C (-49.9 to 200 °C) otherwise ±1 °C
battery
2 x 1.5 volt AAA
battery life
5000 hours (normal use, without backlight)
sensor type
K thermocouple
display
11 mm LCD
dimensions
17 x 47 x 120 mm
weight
105 grams
FREE traceable certificate of calibration included
tel: +44 (0) 1580 891300
7
CATERING THERMOMETERS
TempTest® 2 Smart Thermometer
with unique rotating display
z supplied with hand held, fast response penetration probe
z patented, automatic 360° rotational display
z small compact, waterproof (IP67) design
z intelligent backlit display
The new TempTest 2 smart thermometer incorporates a large, easy to read
digital display, with a precise read-out of temperature over the range of
-49.9 to 299.9 °C with a 0.1 °C/°F resolution and an accuracy of ±0.4 °C
(-49.9 to 200 °C). The thermometer will power off automatically after ten
minutes, maximising battery life. This feature can be disabled.
The thermometer is housed in a waterproof IP67 case with an ergonomic
rubber seal, both include the 'Biomaster' additive to reduce bacterial
growth. As well as being waterproof, it is 'probably' one of the fastest
reading contact thermometers on the market today. The true temperature
of a product can be measured in just three seconds.
Both low battery (icon) and open circuit indication are displayed, when
applicable. Each TempTest 2 is powered by two AAA batteries with a
minimum life expectancy of 5000 hours in normal use without the backlight.
Each thermometer is supplied with a permanently attached hand held,
stainless steel food penetration probe (Ø3.3 x 100 mm) with fast response
tip and a 500 mm PVC lead.
automatic 360° rotational display
The TempTest 2 features an automatic 360° display, which rotates in 90° increments enabling the user to read
the temperature in any position ie. left hand, right hand, vertical or horizontal. This feature can be 'locked' by the
user, if required.
optional accessory
NEW protective silicone
boots are available in
various colours - see below
°C/°F
order code
222-910
830-431
830-432
830-433
830-434
830-435
830-437
8
description
£ each
TempTest 2 thermometer
55.00
protective silicone boot - white 4.00
protective silicone boot - yellow 4.00
protective silicone boot - green 4.00
protective silicone boot - red
4.00
protective silicone boot - blue 4.00
protective silicone boot - black 4.00
www.aceindustrial.co.uk
HOLD
MAX
MIN
AUTO
OFF
HACCP
COMPATIBLE
specification
TempTest 2
range
-49.9 to 299.9 °C
resolution
0.1 °C/°F
accuracy
±0.4 °C (-49.9 to 200 °C) otherwise ±1 °C
battery
2 x 1.5 volt AAA
battery life
5000 hours (normal use, without backlight)
sensor type
K thermocouple
display
11 mm LCD
dimensions
17 x 47 x 120 mm
weight
120 grams
FREE traceable certificate of calibration included
email: [email protected]
thermometer & probe
z designed for the professional caterer
z available in four new colours
The Food Check is designed specifically for the
food and catering professional. The thermometer
will measure temperature quickly and accurately
when monitoring cooked and chilled foods as part
of HACCP and health and safety procedures.
The unit features a large, easy to read, LCD display
with open circuit and low battery indication.
Each Food Check is supplied with a permanently
attached food penetration probe with a 130 mm
stainless steel stem and 500 mm PVC lead.
order code
221-018
221-028
221-038
221-048
221-058
830-224
832-050
description
£ each
Food Check - White
70.00
55.00
Food Check - Yellow
70.00
55.00
Food Check - Green
70.00
55.00
Food Check - Red
70.00
55.00
55.00
Food Check - Blue
70.00
protective silicone boot - red
6.00
6.00
s/steel wall bracket & boot
12.00
12.00
°C
AUTO
OFF
HACCP
COMPATIBLE
specification
Food Check
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C) otherwise ±1 °C
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
CATERING THERMOMETERS
Food Check
Thermamite® Thermometer
complete with food penetration probe
z FREE traceable certificate of calibration
z compact & robust design
The Thermamite thermometer offers accuracy, flexibility and ease of use,
coupled with the durability and reliability that is required by the food and
catering industry in helping to meet today's food hygiene legislation.
The thermometer incorporates a clear LCD display with a precise read-out
of temperature over the range of -50 to 300 °C with a 1 °C resolution. Low
battery and open circuit indication are also displayed. The unit will
power off automatically after ten minutes, maximising battery life.
Each thermometer is supplied with a permanently
attached pointed, stainless steel food penetration
probe (Ø3.3 x 100 mm) and a 500 mm PVC lead.
order code
261-010
261-020
261-030
261-040
261-050
830-225
832-050
description
Thermamite - White
Thermamite - Yellow
Thermamite - Green
Thermamite - Red
Thermamite - Blue
protective silicone boot - blue
s/steel wall bracket & boot
fax: +44 (0) 1580 891350
£ each
45.00
45.00
45.00
45.00
45.00
6.00
12.00
°C
AUTO
OFF
HACCP
COMPATIBLE
specification
Thermamite
range
-50 to 300 °C
resolution
1 °C
accuracy
±1 °C ±0.1 %
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
tel: +44 (0) 1580 891300
9
CATERING THERMOMETERS
ThermaCheck Thermometer
complete with thermistor penetration probe
z assured accuracy for the life of the thermometer
z high system accuracy ±0.4 °C
The ThermaCheck thermistor thermometer has been
specifically designed for use in the catering and
food processing industries to cope with routine
day-to-day usage.
The instrument is housed in an ergonomic, robust
ABS case that includes 'Biomaster' additive to reduce
bacterial growth. The thermometer's auto-power off
facility turns the instrument off automatically after
ten minutes.
The ThermaCheck thermometer is supplied complete
with a permanently attached food penetration
probe with a 130 mm stainless steel stem and
one metre coiled PU lead.
order code
226-042
830-221
832-050
description
£ each
ThermaCheck
80.00
protective silicone boot - white
6.00
s/steel wall bracket & boot
12.00
°C
HACCP
AUTO
OFF
Assured
Accuracy
COMPATIBLE
specification
ThermaCheck
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-20 to 70 °C)
battery & life
3 x 1.5 volt AAA - 20000 hours
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
220 grams
FREE traceable certificate of calibration included
ThermaCheck Plus
waterproof thermometer & probe
z robust waterproof case offering IP66/67 protection
z backlight, auto-off, max/min & hold functions
The ThermaCheck Plus thermistor thermometer utilises
state of the art electronic circuitry, designed for reliability
and ease of use and can be submerged or washed
under a running tap - ideal for both catering and food
processing applications where cleaning is paramount.
The instrument is housed in an ergonomic, ABS case
that includes 'Biomaster' additive to reduce bacterial
growth. Each ThermaCheck Plus has an integrated
rubber seal to ensure complete water resistance and
helps to reduce the possibility of damage in harsh
environments.
Each unit is supplied complete with a permanently
attached food penetration probe with a 130 mm
stainless steel stem and one metre coiled PU lead.
order code description
232-042
ThermaCheck Plus
830-231
protective silicone boot - white
10
www.aceindustrial.co.uk
£ each
90.00
7.00
°C/°F
HOLD
MAX
MIN
AUTO
OFF
IP66/
IP67
HACCP
COMPATIBLE
specification
ThermaCheck Plus
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy
±0.4 °C (-10 to 70 °C)
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
thermistor
display
15 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
email: [email protected]
thermometer & probe
z temperature range of -49.9 to 299.9 °C
z FREE traceable certificate of calibration
The CaterTemp professional digital thermometer
is designed with the catering and food processing
industry in mind and incorporates a combination
of proven circuitry and durability. The thermometer
is housed in a robust ABS case that contains
'Biomaster' additive to reduce bacterial growth.
The instrument's LCD displays open circuit and low
battery indication, when applicable, and will power
off automatically after ten minutes, maximising
battery life.
°C
AUTO
OFF
HACCP
COMPATIBLE
specification
CaterTemp
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C (-50 to 199 °C) otherwise ±1 °C
battery & life
3 x 1.5 volt AAA - 10000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
Each thermometer is supplied with a permanently
attached food penetration probe with a 130 mm
pointed, stainless steel stem and one metre coiled
PU lead.
order code
221-046
830-227
832-053
HOLD
description
£ each
CaterTemp
65.00
protective silicone boot - black 6.00
s/steel wall bracket & boot
12.00
CATERING THERMOMETERS
CaterTemp®
CaterTemp® Plus Thermometer
robust, waterproof & salt resistant
z extruded aluminium case for superior durability
z waterproof case offering IP66/67 protection
The CaterTemp Plus thermometer incorporates the
latest microprocessor technology with improved
durability, designed for reliability and ease of use in
day-to-day catering and food processing applications.
The thermometer incorporates a secure battery
compartment with a waterproof cover and is supplied
with a permanently attached, water resistant, heavy
duty, penetration probe with a Ø3.3 x 130 mm
stainless steel stem and one metre PU coiled lead.
Available with a choice of colour-coded rubber
seals that can help avoid cross contamination.
order code description
£ each
221-056
221-256
221-356
221-456
221-556
830-242
832-150
120.00
120.00
120.00
120.00
120.00
8.50
9.00
CaterTemp Plus - black seal
CaterTemp Plus - yellow seal
CaterTemp Plus - green seal
CaterTemp Plus - red seal
CaterTemp Plus - blue seal
protective PVC boot - black
acrylic wall bracket
fax: +44 (0) 1580 891350
°C
HOLD
AUTO
OFF
IP66/
IP67
HACCP
COMPATIBLE
specification
CaterTemp Plus
range
-49.9 to 299.9 °C
resolution
0.1 °C
accuracy
±0.4 °C ±1 digit
battery & life
9 volt PP3 alkaline - 5000 hours
sensor type
K thermocouple
display
12 mm LCD
dimensions
35 x 60 x 115 mm
weight
244 grams
FREE traceable certificate of calibration included
tel: +44 (0) 1580 891300
11
CATERING THERMOMETERS
Therma 20 Thermometer
for high accuracy readings
z assured accuracy for the life of the thermometer
z meets the European Standard EN13485
z FREE traceable certificate of calibration
The Therma 20 thermistor thermometer has been specifically designed
gned forr use in
the catering industry with HACCP and health and safety proceduress in mind.
The instrument displays temperature to 0.1 °C over the range of -39.9
.9 to 149.9 °C
with a high system accuracy of ±0.4 °C (-10 to 70 °C). This accuracyy is guaranteed
for life, due to the instrument's advanced electronics. The Therma 20 features an
easy to read, LCD display with low battery indication. The thermometer
err can be used
in low ambient working temperatures down to -20 °C, which meets the requirements
of the European Standard EN13485 for the temperature monitoring off food through
the supply chain, from transport to storage to point of sale.
The instrument is housed in an ergonomic, robust ABS case that includes
udes 'Biomaster'
additive to reduce bacterial growth. The thermometer's auto-power offf facility turns
the instrument off automatically after ten minutes. The Therma 20 incorporates
orporates an easy
to use Lumberg screw-locking type connector, allowing a wide range off interchangeable
probes to be used. We offer an extensive range of interchangeable thermistor
ermistorr probes,
see opposite page for full details.
optional accessories
silicone boot - the Therma 20
is waterproof to IP64 when used in
conjunction with this boot. NEW
colours available
zprotective
steel wall bracket (screws not
supplied) and protective white silicone
boot (832-050)
zstainless
test caps with UKAS Certificate
of Calibration are available for checking
the accuracy of the Therma
20 and 22 thermometers
see below for details
zthermistor
°C
order code description
226-040
Therma 20
286-001
thermistor test cap -18 °C
286-002
thermistor test cap 0 °C
286-003
thermistor test cap 3 °C
286-004
thermistor test cap 70 °C
286-005
thermistor test cap 100 °C
830-221
protective silicone boot - white
832-050
s/steel wall bracket & boot
the Therma 20 is exclusive of probe
12
www.aceindustrial.co.uk
£ each
60.00
32.00
32.00
32.00
32.00
32.00
6.00
12.00
AUTO
OFF
HACCP
Assured
Accuracy
COMPATIBLE
specification
Therma 20
range
-39.9 to 149.9 °C
resolution
0.1 °C
system accuracy ±0.4 °C (-10 to 70 °C)
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (20000 hours)
sensor type
thermistor
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
email: [email protected]
NTC thermistor probes with lumberg connectors
penetration probe
Ø3.3 x 130 mm
penetration probe
order code
£ each
This stainless steel penetration probe is versatile
and strong and incorporates a heavy duty, ribbed,
polypropylene handle with a white end cap. Ideal
for many temperature measurement applications
including liquids, semi-solids and granular materials.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
174-166
28.00
The above penetration probe is also available O
with colour-coded end caps. Response time O
less than two seconds. Probe temperature
O
range -40 to 150 °C.
O
O
174-162
1
74-163
174-164
174-165
174-167
28.00
28.00
28.00
28.00
28.00
This fast response, air or gas wire probe is ideal for
measuring air temperatures in fridges, freezers, chill
cabinets and similar. Supplied with a one metre FEP
lead. Response time less than one second. Probe
temperature range -40 to 150 °C.
170-372
18.00
This stainless steel, fast response, needle penetration
probe incorporates a heavy duty ribbed, polypropylene
handle. The probe is suitable for liquids and soft
semi-solid materials including fish, fruit and other soft
or delicate materials. Response time less than one
second. Probe temperature range -40 to 150 °C.
174-100
31.00
This easy to use, flexible, fast response foil between
pack probe has been designed to measure between
packs or boxes of produce in a variety of applications.
Response time less than three seconds. Probe
temperature range 0 to 100 °C.
170-090
23.00
This stainless steel, fast response, hand held air
or gas probe incorporates a heavy duty ribbed,
polypropylene handle. The probe is ideal for
measuring air temperatures in refrigeration units,
storage areas and other similar applications.
Response time less than two seconds. Probe
temperature range -40 to 150 °C.
174-300
27.00
This frozen food probe incorporates a heavy duty
T-shaped, polypropylene handle and a corkscrew
design sensing tip. Ideal for measuring deep frozen
foods or other frozen materials. The probe is supplied
with a one metre PVC detachable lead. Response
time less than six seconds. Probe temperature range
-40 to 150 °C.
170-175
65.00
CATERING THERMOMETERS
Therma 20 Thermometer Probes
Ø3.3 x 130 mm
air or gas wire probe
Ø3.7 x 30 mm with 1000 mm FEP lead
fast response probe
Ø2.6 x 130 mm
foil between pack probe
40 x 50 mm with 1000 mm FEP lead
air or gas probe
Ø4.5 x 130 mm
corkscrew probe
Ø8 x 100 mm
fax: +44 (0) 1580 891350
tel: +44 (0) 1580 891300
13
CATERING THERMOMETERS
Data Temperature Recorder
checks deliveries are within programmable limits
z programmable limits for chilled, frozen & ambient foods
ds
z print out with ACCEPT or REJECT message
z eliminates the possiblities of human error
The DTR (Data Temperature Recorder), printing thermometer
has been specifically designed for use in the food industry with
HACCP and health and safety procedures in mind. This printing
thermometer is also a useful aid in the food industry where regular
checks are required for fridges and freezers, providing a printed
record of each temperature measurement.
The print functions can be operated from the keypad on the
DTR or via a button on the thermistor probe to provide hard
copy evidence of whether a delivery can be accepted or rejected
against programmable temperature limits.
The DTR printing thermometer features an easy to read, LCD
display with low battery indication displaying the temperature
over the range of -39.9 to 149.9 °C with a 0.1 °C/°F resolution
and a high system accuracy of ±0.5 °C (-10 to 70 °C).
Programmable temperatures can be set i.e. chilled, frozen and
ambient food temperatures by the user via the compatible PC
software provided with the unit. The software also allows the user
to personalise the printed ticket with a company name, address,
contact details and logo - see examples shown.
The instrument is housed in a robust ABS case and incorporates
an easy to use Lumberg screw-locking type connector, allowing
a wide range of interchangeable probes to be used. Each DTR
is supplied with a battery charger, two rolls of paper, protective
silicone boot and software, all supplied in a carrying case. We
offer an extensive range of interchangeable thermistor probes,
see page 13 or visit our website for full details.
®
upload your data via USB to Microsoft Excel
j.hunt
°C/°F
order code
226-270
174-170
812-270
832-757
14
description
£ each
DTR printing thermometer
325.00
DTR switch penetration probe
35.00
additional paper roll - single
2.00
stainless steel wall bracket
14.00
the DTR is exclusive of probe
www.aceindustrial.co.uk
AUTO
OFF
p.coles
HACCP
COMPATIBLE
specification
Data Temperature Recorder
range
-39.9 to 149.9 °C
resolution
0.1 °C/°F
system accuracy ±0.5 °C (-10 to 70 °C)
battery
Ni-MH 3.6 volt
battery life
approximately 500 prints
sensor type
thermistor
display
12.7 mm LCD
dimensions
54 x 110 x 183 mm
weight
630 grams
FREE traceable certificate of calibration included
email: [email protected]
CATERING THERMOMETERS
Saf-T-Log® Thermometer
paperless temperature recording for HACCP
z displays date, time & user name with each reading
z eliminates human error & the use of logbooks
z automatically archives data & creates reports
z PASS/FAIL & corrective actions displayed
Measure, store, download and print temperature reports. No
more paper logs or complicated PDA's to train staff how to use!
The Saf-T-Log is as easy to use as your current thermometer.
The Saf-T-Log includes Windows® software to create a list of up
to 300 items that you routinely measure, 10 corrective actions,
along with up to 25 users. Each item can include a high/low
temperature limit that gives the user instant on-screen pass/fail
feedback and gets printed on the report. Once your checklist is
created, it can be saved, emailed to other users and uploaded
onto any Saf-T-Log.
Record up to 1000 readings by simply scrolling to the correct
item and pressing record. Once readings are taken they can be
uploaded to a PC automatically when reconnected. The data is
archived and a report is generated automatically with no additional
user input. The Saf-T-Log report is locked so the data logged
cannot be tampered with.
The Saf-T-Log can be used anywhere with interchangeable
type K thermocouple probes and is housed in a durable
IP66/67 waterproof housing. The thermometer includes a high
contrast backlit display with an accuracy of ±0.4 °C and a
calibration trim function.
USB Connection Point
The Saf-T-Log incorporates
USB port which allows the
user to connect to a PC.
"The Saf-T-Log is a total innovation from ETI.
No other recording handheld system records
data this intuitively at anywhere near the price"
order code description
£ each
292-701
Saf-T-Log
120.00
830-231
protective silicone boot - white
7.00
830-232
protective silicone boot - yellow 7.00
830-233
protective silicone boot - green
7.00
830-234
protective silicone boot - red
7.00
830-235
protective silicone boot - blue
7.00
830-257
protective silicone boot - black
7.00
the Saf-T-Log is exclusive of probe
fax: +44 (0) 1580 891350
protective boot
°C/°F
AUTO
OFF
IP66/
IP67
HACCP
COMPATIBLE
specification
Saf-T-Log
range
-100 to 1372 °C
resolution
0.1 °C
accuracy
±0.4 °C ±0.1 % of reading
battery & life
3 x 1.5 volt AAA - 2500 hours
sensor type
type K thermocouple
display
12 mm LCD
dimensions
32 x 71 x 141 mm
weight
220 grams
FREE traceable certificate of calibration included
tel: +44 (0) 1580 891300
15
CATERING THERMOMETERS
Therma 1, 3 & Elite Thermometers
with interchangeable thermocouple probes
z Elite model includes backlight & max/min functions
z FREE traceable certificate of calibration included
z wide temperature measurement range
z minimum five-years battery life
The Therma 1 and 3 digital thermometers are rugged and easy to use instruments
that operate through the range of -100 to 1372 °C with a 0.1 °C or 1 °C
resolution. The thermometers are housed in a robust ABS case that contains
'Biomaster' additive which reduces bacterial growth.
The Therma 1 and 3 feature large, easy to read, LCD displays with open circuit
'Err', hold and low battery indication. Each thermometer is powered by three
AAA batteries that give a minimum of five years battery life. The units will
power off automatically after ten minutes, maximising battery life. This feature
can be disabled by the user, if required.
We offer an extensive range of interchangeable type K thermocouple probes
for a variety of different applications, see opposite page for details.
Therma Elite thermometer
The Therma Elite incorporates all the features of
a Therma 1 thermometer, but with the addition
of a backlit display, max/min memory function
and a mode button for the selection of 0.1/1 °C/°F.
The thermometer also incorporates a calibration
trim function (±2 °C) which allows the user to
compensate for thermocouple probe errors.
optional accessories
z protective
silicone boot - the Therma series is
waterproof to IP64 when used in conjunction
with this boot. NEW colours now available
z stainless
steel wall bracket (screws not supplied)
and protective black silicone boot (832-053)
°C/°F
order code description
£ each
221-041
Therma 1
50.00
221-043
Therma 3
40.00
221-061
Therma Elite
60.00
830-227
protective silicone boot - black 6.00
832-053
s/steel wall bracket & boot
12.00
the Therma series is exclusive of probe
16
www.aceindustrial.co.uk
HOLD
MAX
MIN
AUTO
OFF
specification
Therma 1/Elite
Therma 3
range 0.1 °C
-99.9 to 299.9 °C
range 1 °C
300 to 1372 °C
-100 to 1372 °C
resolution
0.1 °C & 1 °C
1 °C
accuracy
±0.4 °C ±0.1 %
±1 °C ±0.1 %
battery
3 x 1.5 volt AAA
battery life
minimum 5 years (10000 hours)
sensor type
K thermocouple
display
12 mm LCD
dimensions
25 x 56 x 128 mm
weight
130 grams
FREE traceable certificate of calibration included
email: [email protected]
type K thermocouple
penetration probe
Ø3.3 x 130 mm
penetration probe
Ø3.3 x 300 mm
fast response probe
Ø3.3 x 100 mm
needle penetration probe
Ø1.8 x 130 mm
PTFE handle probe
Ø3.3 x 130 mm
ribbon surface probe
Ø15 x 130 mm
rigid between pack probe
Ø4.5 x 130 mm
miniature needle probe
Ø1.4 reducing to Ø1 mm tip x 50 mm
oven probe
Ø3.3 x 130 mm
This stainless steel penetration probe is strong
and versatile. Ideal for measuring a wide
variety of applications including liquids and
semi-solids. Response time less than three
seconds. Probe temperature range -60 to 250 °C.
This extended, stainless steel penetration probe is
versatile and ideal for measuring a wide variety
of applications including liquids and semi-solids.
Response time less than three seconds. Probe
temperature range -60 to 250 °C.
This reduced tip, fast response, stainless steel
penetration probe is ideal for liquids or semisolids i.e. fish, fruit and other similar materials.
Response time less than two seconds. Probe
temperature range -60 to 250 °C.
This fast response, stainless steel, needle
penetration probe is suitable for liquids and semisolids i.e. fish, fruit and other similar materials.
Response time less than two seconds. Probe
temperature range -60 to 250 °C.
order code
£ each
123-160
27.00
323-160
28.00
(coiled lead)
123-168
32.00
323-168
33.00
(coiled lead)
123-159
30.00
323-159
31.00
(coiled lead)
123-100
29.00
323-100
30.00
(coiled lead)
This high temperature penetration probe
incorporates a PTFE handle and a two metre PTFE
lead, making it ideal for ovens. Response time
less than three seconds. Probe temperature
range -60 to 250 °C.
133-162
43.00
This precision, ribbon surface probe utilises flat
ribbon technology that ensures a fast, accurate
response with minimal heat loss. Response time less
than 0.5 of a second. Probe temperature range -60
to 250 °C. A right-angled version is also available.
123-030
37.00
123-032
42.00
This rigid, stainless steel between pack probe
is strong and versatile, designed specifically to
measure between packets or boxes of produce.
Response time less than three seconds. Probe
temperature range -60 to 250 °C.
CATERING THERMOMETERS
Hand Held Temperature Probes
(right-angled)
123-060
30.00
323-060
31.00
(coiled lead)
This miniature, stainless steel needle probe is
supplied with a one metre PTFE lead. Ideal for
measuring small semi-solid items. Response
time less than one second. Probe temperature
range -60 to 250 °C.
133-180
28.00
This oven probe has a stainless steel handle and
a two metre PTFE high temperature lead. An
oven probe without a handle is also available.
Response time less than four seconds. Probe
temperature range -60 to 250 °C
133-170
43.00
133-173
20.00
(no handle)
Please note: for hand held type T thermocouple probes, replace the third digit (3) of the order code with the number 7
fax: +44 (0) 1580 891350
tel: +44 (0) 1580 891300
17
CATERING THERMOMETERS
Catering Thermometer Kits
ideal for food & fridge/freezer monitoring
These thermometer and probe kits are designed for the food and catering industry. For a full specification on
the Therma 20 and Therma 3 see pages 12 and 16. A full specification on the Therma 22 can be found on our
website. These kits represent excellent value-for-money as each one is supplied in a FREE carrying case with a FREE
temperature log book and a FREE tub of UniWipes.
professional catering thermometer kit 0.1 °C
each kit contains:
z
z
z
z
z
z
Therma 20 thermometer (226-040)
penetration probe (174-166)
air wire probe (170-372)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
£ each
860-120
professional catering kit
106.00
FREE traceable certificate of calibration included
food hygiene thermometer kit 0.1 °C
each kit contains:
z
z
z
z
z
z
Therma 22 thermometer (227-022)
penetration probe (177-166)
air wire probe (177-372)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
£ each
860-125
food hygiene kit
118.00
FREE traceable certificate of calibration included
budget catering thermometer kit 1 °C
each kit contains:
z
z
z
z
z
z
Therma 3 thermometer (221-043)
penetration probe (123-160)
PTFE wire probe (133-362)
temperature log book (831-100)
tub of 40 UniWipes (836-032)
ABS carrying case (834-120)
order code description
£ each
860-025
budget catering kit
73.50
FREE traceable certificate of calibration included
18
www.aceindustrial.co.uk
email: [email protected]
for precise temperature measurement
z fast response, reaches temperature in just three seconds
z delivers consistent results for Sous Vide cooking
Sous Vide cooking has become more popular in professional kitchens over the past few years. New cooking methods
require new temperature testing techniques. Therefore, ETI has designed two Sous Vide kits each containing a high
accuracy Therma 1 thermometer, Sous Vide needle probe(s), Sous Vide foam/tape (one metre) all supplied in a
FREE carrying case/zip pouch. For a full specification on the Therma 1 thermometer, see page 16.
Sous Vide thermometer kit
each kit contains:
z Therma
1 thermometer (221-041)
mm Sous Vide needle probe (133-109)
z 120 mm Sous Vide needle probe (133-110)
z waterproof countdown timer (806-150)
CATERING THERMOMETERS
Sous Vide Thermometer Kits
z 60
z tub
of 40 UniWipes (836-032)
Vide foam/tape - one metre (600-475)
z ABS carrying case (834-150)
z Sous
order code description
£ each
860-035
Sous Vide thermometer kit
138.00
600-475
Sous Vide foam/tape - one metre
20.00
FREE traceable certificate of calibration included
Budget Sous Vide thermometer kit
each kit contains:
z Therma
1 thermometer (221-041)
z 60 mm Sous Vide needle probe (133-109)
z Sous Vide foam/tape - one metre (600-475)
z zip pouch (830-003)
order code description
£ each
860-036
budget Sous Vide thermometer kit 100.00
600-475
Sous Vide foam/tape - one metre
20.00
FREE traceable certificate of calibration included
Sous Vide needle probe
Ø1.1 x 60 or 120 mm
fax: +44 (0) 1580 891350
This miniature, stainless steel needle probe is
supplied with a one metre PTFE lead. The needle
probe is ideal for delicate foods. Response time
less than one second. Probe temperature range
-60 to 250 °C.
order code
£ each
133-109
32.00
(60 mm)
133-110
36.00
(120 mm)
tel: +44 (0) 1580 891300
19
CATERING THERMOMETERS
Reference Thermapen®
0.01 °C resolution, high accuracy thermometer
z 5-point UKAS Certificate of Calibration included
0601
z ideal for calibration comparison checks
The Reference Thermapen thermometer is
a high accuracy PT100 instrument that is
supplied with a 5-point UKAS Certificate of
Calibration. Each certificate indicates deviations
from standards at various check points: -18,
0, 40, 70 and 100 °C. Special ranges may
be certified by arrangement with our UKAS
calibration laboratory.
°C
The unit incorporates a stainless steel, liquid/
penetration probe Ø3.3 x 108 mm, that
conveniently folds back through 180 degrees into
the side of the instrument when not in use.
AUTO
OFF
UKAS
specification Reference Thermapen
range
-69.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.07 °C (-30 to 149.99 °C) otherwise ±0.2 °C
battery & life
2 x 3 volt CR2032 lithium coin cell - 1000 hours
sensor type
PT100
display
12 mm LCD
dimensions
19 x 47 x 153 mm
weight
97 grams
a UKAS Certificate of Calibration is included
order code description
£ each
222-213
Reference Thermapen
125.00
830-260
protective silicone boot
4.00
830-265
silicone boot - glow in dark 6.00
830-110
protective wallet
5.00
832-200
wall bracket
7.50
Thermapen is supplied in a zip pouch (830-001)
Reference Thermometers
±0.05 °C high system accuracy
z 5-point UKAS Certificate of Calibration included
z supplied complete with high accuracy probe
These Reference thermometers are high accuracy PT100 instruments
that are supplied with a 5-point UKAS Certificate of Calibration.
Each certificate indicates deviations from standards at various check
points: -18, 0, 40, 70 and 100 °C. Special ranges may be certified
by arrangement with our in-house UKAS calibration laboratory.
Each unit features a simple on/off push
button with open circuit and low battery
indication, when applicable. The Reference
Plus incorporates the additional features of a
max/min and hold function.
The Reference thermometers are supplied
with a permanently attached, high accuracy
probe incorporating a 1/10th DIN PT100
sensor. The probe measures Ø3.3 x 130 mm
and is supplied with a one metre PVC lead.
order code
222-055
222-063
20
description
Reference
Reference Plus
www.aceindustrial.co.uk
£ each
195.00
255.00
°C
HOLD
MAX
MIN
0601
AUTO
OFF
UKAS
specification
Reference & Reference Plus
range
-199.99 to 199.99 °C
resolution
0.01 °C
accuracy
±0.05 °C (-30 to 150 °C) ±0.1 °C (-50 to 200 °C)
battery
3 x 1.5 volt AAA - 2000 hours
sensor type
PT100 1/10th DIN
display
10 mm LCD
dimensions
25 x 56 x 128 mm
weight
210 grams
a UKAS Certificate of Calibration is included
email: [email protected]
in-house accredited laboratory
0601
z thermometer temperature range -50 to 200 °C
z rapid turnaround & flexible certification
z certified uncertainties from ±0.04 °C
z one to five-point UKAS Certificates
Our in-house UKAS accredited calibration laboratory for
temperature has a wide measurement range of -50 to
200 °C with a calibration and measurement capability of
0.02 °C. The laboratory can also measure resistance up
to 16 M: (i.e. resistance decade boxes and PT100/RTD
temperature simulators) and DC voltage 0 to 200 mV
(i.e. thermocouple simulators and calibrators). Original
UKAS Certificates provide proof that instruments and
probes have been calibrated against nationally approved
standards.
CATERING THERMOMETERS
UKAS Temperature Calibration
thermometers & probes
Each UKAS Certificate indicates the deviations
from standards at various check points, the standard
being -18, 0, 40, 70 and 100 °C with a guaranteed
uncertainty, dependant on the probe type, see
calibration and measurement capability table below.
test caps & simulators
Each UKAS Certificate indicates the deviations from
standards at specific check points (-18, 0, 3, 70 and
100 °C) to an uncertainty of ±0.1 °C (resistance) or
±0.15 °C (thermocouple).
data-loggers
Each UKAS Certificate indicates the deviations from
standards at three check points (-18, 0 and 40 °C)
to an uncertainty of ±0.04 °C.
standard certificate uncertainty
thermistor thermometer & probe
-50 to 150 °C
CMC 0.04 °C
PT100 (resistance sensors) thermometer & probe
-50 to 200 °C
CMC 0.04 °C
thermocouple thermometer & probe
-50 to 120 °C CMC 0.15 °C
120 to 200 °C CMC 0.2 °C
temperature data-loggers
-50 to 100 °C
CMC 0.04 °C
order code
890-200
890-210
890-215
890-230
890-235
890-240
UKAS Certificate - temperature
instrument only standard 5-point
instrument & probe system 5-point
checker 3-point
test cap 1-point
simulator 5-point
data-logger 3-point
fax: +44 (0) 1580 891350
thermistor & PT100 test caps
-18 to 100 °C
CMC 0.1 °C
thermocouple simulators
-200 to -50 °C CMC 0.25 °C
-50 to 1372 °C CMC 0.15 °C
tel: +44 (0) 1580 891300
21
CATERING THERMOMETERS
Mini RayTemp®
infrared thermometer
z temperature range -50 to 330 °C
z compact, lightweight & easy to use
z laser dot alignment
z target ratio 12:1
The Mini RayTemp infrared thermometer is a compact, lightweight and low cost
infrared thermometer. Simply aim and pull the trigger to display the temperature
of the item being measured.
This infrared thermometer measures temperature over the range of -50 to 330 °C
with an assured accuracy of ±2 °C over the range of 0 to 330 °C, outside of
this range (-50 to 0 °C) accuracy is ±4 °C.
The Mini RayTemp has a clear, easy to read, LCD display with low battery,
backlight indication and an auto-power off facility that turns the instrument off
after ten seconds, maximising battery life. This thermometer is ideal for
numerous temperature measurement applications where contact with the item
to be measured is an issue.
The thermometer also incorporates laser assisted alignment as standard,
to assist in pin-pointing the area of measurement. The unit incorporates a
12:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.95
making it suitable for a wide range of food and industrial applications.
optional accessories
z
protective nylon pouch with belt strap (830-040)
z
Comparator (814-132)
low cost calibration checker
The Comparator provides an inexpensive way of checking
the temperature of infrared thermometers when used in
conjunction with a Reference thermometer, see page 20
for details.
°C/°F
order code
814-080
830-040
814-132
22
description
Mini RayTemp
protective nylon pouch
Comparator
www.aceindustrial.co.uk
£ each
24.00
5.00
32.00
specification
range
resolution
accuracy - infrared
field of view
emissivity
battery
battery life
display
dimensions
weight
AUTO
OFF
Mini RayTemp
-50 to 330 °C
0.1 °C/°F
±2 °C (0 to 330 °C) otherwise ±4 °C
target ratio 12:1
0.95 fixed
9 volt PP3
80 hours continuous use
custom LCD
36 x 88 x 131 mm
130 grams
email: [email protected]
ideal for the food industry
z assured accuracy of ±1 °C over the range of 0 to 65 °C
z compact, lightweight & easy to use
The RayTemp 3 is ideal for measuring food
surface temperatures, eliminating the need to
touch or contaminate the food you are measuring,
avoiding the risk of cross-contamination.
Simply aim and pull the trigger to display
the temperature of the item being measured.
In addition the LCD will display the maximum
temperature. The instrument incorporates a clear,
easy to read, LCD display with low battery, laser and
backlight indication and an auto-power off facility.
The thermometer also incorporates laser assisted
alignment as standard, to assist in pin-pointing the
area of measurement.
order code
814-040
830-040
834-740
description
RayTemp 3
protective nylon pouch
ABS carrying case
£ each
55.00
5.00
13.50
°C/°F
MAX
MIN
specification
range
resolution
accuracy - infrared
field of view
emissivity
battery & life
display
dimensions
weight
AUTO
OFF
RayTemp 3
-60 to 500 °C
0.1 °C (-9.9 to 199.9 °C) or 1 °C
±1 °C (0 to 65 °C) otherwise ±2 °C
target ratio 12:1
0.97 fixed
2 x AAA alkaline - 140 hours
custom LCD
39 x 72 x 175 mm
180 grams
CATERING THERMOMETERS
RayTemp® 3 Infrared Thermometer
Combo Infrared Thermometer
with 180° foldaway penetration probe
z two instruments in one - contact & non-contact
z wide temperature range
The Combo is two instruments in one compact unit - a
digital infrared non-contact thermometer and
a traditional probe thermometer that features a
foldaway penetration probe.
Simply aim the infrared thermometer at the target and
press the measurement button to display the surface
temperature. The default emissivity is 0.95 but can
be changed from 0.01 to 1, if required.
Alternatively, to take liquid or semi-solid
product temperatures, use the Combo's
stainless steel penetration probe (Ø3.3
x 120 mm). The unit also features a
lock function for continuous temperature
measurement.
order code
814-065
830-110
830-001
description
Combo
protective wallet
zip pouch
£ each
49.00
5.00
6.00
fax: +44 (0) 1580 891350
specification
range - infrared
range - probe
resolution
accuracy - infrared
accuracy - probe
field of view
emissivity
battery & life
display
dimensions
weight
°C/°F
LOCK
MAX
MIN
AUTO
OFF
Combo
-32.9 to 219.9 °C
-54.9 to 329.9 °C
0.1 °C/°F
±2 % of reading or ±2 °C whichever is greater
±1 % of reading or ±1 °C whichever is greater
target ratio 5:1
0.95 default - adjustable 0.01 to 1 emissivity
3 volt CR2032 lithium coin cell - 40 hours
custom LCD
25 x 40 x 156 mm
75 grams
tel: +44 (0) 1580 891300
23
CATERING THERMOMETERS
ThermaData® Logger
temperature recording thermometers
z waterproof housing offering IP66/67 protection
z temperature range -40 to 85 °C or 125 °C
z resolution 0.1 °C, high accuracy ±0.5 °C
z meets EN 12830, S & T, C & D, 1
The ThermaData logger mk II series consists of a comprehensive
range of portable data-loggers utilising the latest in electronic
technology. The ThermaData loggers are housed in waterproof,
ergonomic cases that are designed to meet IP66/67 protection.
The ThermaData logger mk II range offers the choice of either blind
data-loggers or data-loggers with an LCD display. Other options
include internal and external temperature sensors/probes. The
external probes can be either fixed or detachable via a waterproof
three-pin connector. The remote temperature probes are supplied
with either a one or three metre (where stated) PVC/PFA (fixed) or
PUR/PVC (detachable) lead.
Each logger incorporates a red and green LED, the flashing green
LED indicates that the logger is active/logging and the flashing
red LED indicates that your customised preset alarms have been
exceeded. For details of the range of loggers, see opposite.
ThermaData Studio software
The ThermaData logger is connected to a PC via a USB cradle. By selecting the relevant icon the data can be
downloaded and displayed either as a graph, table or summary. The information can be analysed by zooming
in, storing to disc or exporting as a text (.txt) or Excel (.xls) file to other software packages.
The ThermaData Studio software incorporates several useful functions, including the ability to display two traces
on a graph, the trace colours are user selectable. All files can be viewed as thumbnail icons for easy identification.
The ThermaData Studio software will work equally with all
ThermaData loggers. The software is both powerful and
sophisticated, yet user-friendly enabling temperature data
to be organised and analysed to provide management
information. The software allows the user to programme
the logging sample/interval rate (0.1 to 255 minutes),
the real-time clock, °C or °F, delayed start (maximum
23 hours, 59 minutes and 59 seconds) or select a magnetic
start option. It is also possible to include a 32-character
user ID for each logger.
By selecting continuous logging in the software options, it
is possible to start the ThermaData logger only once and
never have to reset its parameters again, even if downloaded
regularly. Unlike most low cost loggers, the ThermaData
logger will continue recording during and after downloading
the data.
°C/°F
24
MAX
MIN
IP66/
IP67
www.aceindustrial.co.uk
The ThermaData Studio software is supplied with each
USB cradle. Please note: when initially ordering loggers
it is necessary to order at least one ThermaData logger
cradle.
email: [email protected]
ThermaData logger - model TD
blind with an internal sensor
LCD with an internal sensor
zNTC
thermistor sensor
z
-40 to 85 °C
zrecords up to 4000
readings
order code
295-001
description
model TB
£ each
50.00
ThermaData logger - model TBF
zNTC
thermistor sensor
z
-30 to 85 °C
zrecords up to 4000
readings
order code
296-001
LCD with an external fixed sensor
zNTC
thermistor sensor
x 100 mm probe,
1 metre PVC/PFA lead
z
-40 to 125 °C
zrecords up to 4000
readings
zNTC
thermistor sensor
zØ3.3 x 100 mm probe,
1 metre PVC/PFA lead
z
-40 to 125 °C
zrecords up to 4000
readings
zØ3.3
description
model TBF
£ each
67.00
ThermaData logger - model TBF
order code
296-101
£ each
77.00
LCD with an external fixed sensor
This logger cradle is
supplied complete with
ThermaData Studio
software and a start
magnet.
zNTC
thermistor sensors
zØ3.3 x 100 mm probe,
1 metre PUR/PVC lead
z-30 to 85 °C (internal)
z-40 to 125 °C (external)
zrecords up to 2 x 2000
readings
description
model TD1C
description
model TDF
ThermaData logger - model TDF
blind logger with an external fixed sensor
order code
296-051
£ each
60.00
ThermaData logger - model TDF
blind logger with an external fixed sensor
order code
295-101
description
model TD
CATERING THERMOMETERS
ThermaData logger - model TB
£ each
107.00
Each USB cradle is
supplied with a 1 metre
PVC lead.
order code
293-804
description
£ each
cradle, software & start magnet 44.00
optional accessories
specification
range internal
range external
resolution
accuracy
memory
sample rate
battery
battery life
display - blind
display - LCD
dimensions
weight
all models
-30/-40 to 85 °C - model dependant
-40 to 125 °C - model dependant
0.1 °C
±0.5 °C
4000 or 2 x 2000 readings
0.1 to 255 minutes
3.6 volt ½ AA lithium
approximately 18 months
2 LED's
10 mm LCD/2 LED's
Ø76 x 23 mm
71 to 113 grams - model dependant
fax: +44 (0) 1580 891350
Loggers are supplied with a
white seal as standard, however
coloured seals are available in
packs of seven colours: black,
blue, brown, green, red, white
and yellow. This allows for colourcoding in various applications.
An optional protective silicone
boot is also available.
order code
830-270
296-990
description
protective silicone boot - white
coloured seals - pack of seven
£ each
5.00
10.00
tel: +44 (0) 1580 891300
25
CATERING THERMOMETERS
ThermaData® Logger
blind recording thermometer
z blind recording thermometer & data-logger
z visual display shows if limits are exceeded
The ThermaData logger is designed to record the
temperature of the surrounding environment. Housed in
a water resistant polyethylene case that incorporates
two LED status indicators.
The ThermaData Studio software allows the user to
programme the logging sample/interval rate (1 to
255 minutes), the real-time clock, °C/°F, delayed start
(maximum 23 hours, 59 minutes) or push-button start and
a 12-character user ID. The software also incorporates
a password protected calibration adjustment feature that
allows the user to check the calibration of loggers and
make minor adjustments 0.5 °C (±3 °C).
Optional colour-coded cases are available. For more
information contact our sales office or visit our website.
order code
293-001
293-101
293-104
description
ThermaData logger - blue
software & RS232 serial lead
software & USB lead
£ each
30.00
30.00
30.00
°C/°F
MAX
MIN
specification ThermaData logger
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
-40 to 85 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt ½ AA lithium
minimum 3 years
Ø55 x 25 mm
45 grams
Stainless Steel ThermaData® Loggers
blind recording thermometers
z integral USB interface for setup and download
zfive probe lengths available
These stainless steel data-loggers are ideal for food and
other applications where a high temperature data-logger is
required. The ThermaData logger is housed in a waterproof,
food grade 316 stainless steel case to protect the logger
from corrosion, impact and moisture (IP66/67).
The ThermaData Studio software allows the user to
programme the logging sample/interval rate. The software
also incorporates a password protected calibration adjustment
feature that allows the user to check the calibration of loggers
and make minor adjustments. Each logger is supplied with
a two metre USB lead and ThermaData Studio software.
order code description
£ each
293-900
s/steel logger - without probe
85.00
293-930
s/steel logger - 3.3 x 50 mm probe
95.00
293-931
s/steel logger - 4.5 x 100 mm probe* 115.00
293-932
s/steel logger - 4.5 x 150 mm probe* 120.00
293-933
s/steel logger - Ø4.5 x 200 mm probe* 125.00
supplied with a two metre USB lead & ThermaData Studio
software. *Each logger features a Ø3.3 mm reduced tip
26
www.aceindustrial.co.uk
°C/°F
MAX
MIN
IP66/
IP67
specification Stainless Steel ThermaData logger
range
resolution
accuracy
memory
sample rate
battery
battery life
dimensions
weight
-20 to 105 °C
0.5 °C
±1 °C (±0.5 °C with calibration utility)
2048 temperature readings
1 minute to 255 minutes
3.6 volt 2/3 AA lithium
minimum 3 years
Ø22.5 x 129 mm (excluding probe)
170 grams - model dependant
email: [email protected]
with 360° rotating display
z fast response probe, five to six second readings
z backlit display & auto-power off function
The new ThermoPop is a pocket-sized, waterproof (IP66)
thermometer which incorporates a fast response Ø3 x 114 mm
stainless steel penetration probe with reduced tip.
The unit incorporates a unique (patent pending) 360° rotating
display. Simply push a button to rotate the display in 90°
increments, enabling the user to read the temperature in any
position ie. left hand, right hand, vertical or horizontal.
The ThermoPop indicates temperature over the range
of -50 to 300 °C with a 1 °C/°F resolution. Each unit
is supplied with a probe cover with integral pocket clip.
order code
810-280
description
ThermoPop thermometer
£ each
17.00
°C/°F
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
AUTO
OFF
IP66
CATERING THERMOMETERS
ThermoPop® Thermometer
ThermoPop
-50 to 300 °C
1 °C/°F
±1 °C (-20 to 120 °C)
3 volt CR2032 - 5000 hours
9 mm LCD
20 x 45 x 178 mm
30 grams
Super-Fast Mini Thermometer
with max/min & hold function
z fast response probe, five to six second readings
z easy to use, pocket-sized thermometer
The Super-Fast Mini is a pocket-sized, water resistant
(IP65) thermometer that measures temperature over
the range of -39.9 to 149.9 °C with a 0.1 °C/°F
resolution.
The thermometer incorporates a fast response Ø2.5 x
73 mm stainless steel penetration probe with reduced
tip and features a max/min and hold function.
Each unit is powered by a CR2032 lithium coin cell
battery and supplied with a probe cover with integral
pocket clip.
reduced tip for fast response
order code
810-279
description
Super-Fast Mini thermometer
fax: +44 (0) 1580 891350
£ each
16.00
°C/°F
HOLD
specification
range
resolution
accuracy
battery & battery life
display
dimensions
weight
MAX
MIN
AUTO
OFF
IP65
Super-Fast Mini
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-10 to 100 °C)
3 volt CR2032 - 5000 hours
8 mm LCD
Ø25 x 150 mm
20 grams
tel: +44 (0) 1580 891300
27
CATERING THERMOMETERS
EcoTemp® Thermometer
with max/min function
z detachable, stainless steel food penetration probe
z large, easy to read LCD display
The EcoTemp digital thermometer features a large, easy to
read, LCD display with display hold and max/min memory
functions. The instrument measures temperature over the
range of -49.9 to 199.9 °C with a 0.1 °C/°F resolution.
Both open circuit and low battery indication are displayed,
when applicable. This thermometer is ideal for monitoring
cooking and food holding temperatures as part of HACCP
and health and safety procedures.
Each EcoTemp thermometer is supplied with a detachable,
stainless steel food penetration probe (Ø3.5 x 125 mm) with
a 700 mm silicone connecting lead.
specification
°C/°F
order code
810-950
810-951
830-215
HOLD
MAX
MIN
AUTO
OFF
HACCP
COMPATIBLE
description
EcoTemp thermometer & probe
replacement penetration probe
protective silicone boot - white
£ each
20.00
8.00
6.25
range
resolution
accuracy
battery & life
sensor type
display
dimensions
weight
EcoTemp
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C (-49.9 to 149.9 °C)
2 x 1.5 volt AAA - 10000 hours
thermistor
custom 22 mm LCD
20 x 58 x 165 mm
115 grams
Multi-function Thermometer
with max/min & alarm functions
z displays both temperature & alarm set temperature
z supplied with stainless steel food penetration probe
This digital multi-function thermometer is compact
and easy to use. The thermometer displays both the
temperature and the alarm set temperatures and is ideal
for restaurants and cafes as an economical solution for
temperature measurement applications.
The thermometer features a display hold facility and a
max/min memory function together with an adjustable
audible high/low temperature alarm.
The rear of the case incorporates a useful foldaway
worktop stand, pocket clip and probe storage clip. Each
unit is supplied with a pointed, stainless steel, food
penetration probe (Ø3.5 x 125 mm) with one metre
PVC connecting lead and probe cover.
°C/°F
order code
810-927
28
HOLD
MAX
MIN
AUTO
OFF
description
multi-function thermometer
www.aceindustrial.co.uk
£ each
12.00
specification
range
resolution
accuracy
battery & life
sensor type
display
dimensions
weight
multi-function
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C (-19.9 to 149.9 °C)
1.5 volt AAA - 5000 hours
thermistor
custom LCD
32 x 86 x 116 mm
98 grams
email: [email protected]
CATERING THERMOMETERS
Gourmet Thermometer
water resistant with folding probe
z pocket-sized instrument with hold function
z temperature range -39.9 to 149.9 °C
z includes CalCheck 0.0 °C function
z accuracy of ±0.5 °C or better
The water resistant Gourmet folding probe thermometer is
an easy to use instrument, ideal for monitoring cooking,
cooling and food holding temperatures as part of HACCP
and health and safety procedures. The unit measures
temperature over the range of -39.9 to 149.9 °C with a
0.1 °C/°F resolution and incorporates two push buttons,
on/off and hold.
The Gourmet's battery will last up to 3000 hours continuous
use or, if used two hours a day, seven days a week, for a
minimum of ten years. Each unit incorporates a stainless
steel, food penetration probe (Ø3.5 x 110 mm) that
conveniently folds back into the side of the instrument
when not in use, rotating through 180 degrees, allowing
the user to transport the instrument safely. The Gourmet
is available in six colours, ideal for different applications.
PVC wallet
CalCheck function
The Gourmet features a CalCheck 0.0 °C function
that allows the user to verify the accuracy of the
thermometer at any time, giving confidence that
measurements are accurate.
zraw
meat
zcooked
optional accessories
meat
z protective
zsalad/fruit
products
zvegetable
products
zraw
z anti-bacterial
fish/shellfish
z bakery/dairy
PVC wallet with belt strap,
ideal for transporting and protecting
your thermometer against accidental
damage (830-110)
products
°C/°F
order code description
810-730
810-732
810-733
810-734
810-735
810-736
830-110
830-001
832-200
Gourmet thermometer - white
Gourmet thermometer - yellow
Gourmet thermometer - green
Gourmet thermometer - red
Gourmet thermometer - blue
Gourmet thermometer - brown
protective wallet
zip pouch
wall bracket
fax: +44 (0) 1580 891350
£ each
20.00
20.00
20.00
20.00
20.00
20.00
5.00
6.00
7.50
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
HOLD
wipes - see page 39
AUTO
OFF
CAL
CHECK
IP65
Gourmet
-39.9 to 149.9 °C
0.1 °C/°F
±0.5 °C (-39.9 to 124.9 °C)
3 volt CR2032 lithium coin cell
3000 hours
thermistor
16 mm LCD
20 x 52 x 155 mm
83 grams
tel: +44 (0) 1580 891300
29
CATERING THERMOMETERS
Pocket-sized Thermometers
economical & easy to use
pen-shaped thermometer
T-shaped thermometer
This pen-shaped thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
This handy-sized thermometer measures temperature
over the range of -49.9 to 149.9 °C, features a
Ø3.5 x 120 mm stainless steel penetration probe and
incorporates a °C/°F switch and display hold feature.
Supplied with a probe cover that includes a pocket clip.
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
order code
810-260
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
pen-shaped
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
17 x 20 x 190 mm
15 grams
description
pen-shaped thermometer
£ each
13.00
water resistant thermometer
30
Each unit is supplied with a protective probe cover that
incorporates a pocket clip and wall-mounting keyhole slot.
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
FR water resistant
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C (-19.9 to 119.9 °C)
1.5 volt LR44 - 5000 hours
8.5 mm LCD
Ø40 x 17 x 170 mm
28 grams
description
FR water resistant thermometer
www.aceindustrial.co.uk
£ each
13.00
This waterproof thermometer incorporates a Ø3.5 x
120 mm stainless steel food penetration probe. The
thermometer can also be placed inside a dishwasher
to ensure the maximum cycle temperature is correct.
The thermometer features three easy
to push buttons, max/min, °C/°F
and on/off. Each unit is supplied
with a probe cover that incorporates
a pocket clip.
order code
810-270
description
T-shaped thermometer
waterproof thermometer
This handy pocket-sized, water resistant
thermometer features a Ø2.5 x 120 mm
fast response reduced tip, stainless
steel food penetration probe. The unit
measures temperature over the
range of -49.9 to 199.9 °C with a
resolution of 0.1 °C/°F.
specification
range
resolution
accuracy
battery & life
display
dimensions
weight
order code
810-265
T-shaped
-49.9 to 149.9 °C
0.1 °C/°F
±1 °C
1.5 volt LR44 - 5000 hours
6 mm LCD
20 x 58 x 145 mm
15 grams
£ each
13.00
waterproof
-49.9 to 199.9 °C
0.1 °C/°F
±1 °C/°F (-19.9 to 119.9 °C)
1.5 volt LR44 - 5000 hours
8 mm LCD
15 x 24 x 200 mm
25 grams
order code description
£ each
810-275
waterproof thermometer
15.00
supplied with a FREE protective silicone boot
email: [email protected]
with internal & external temperature sensor
z programmable high/low audible alarm
z records the max/min temperatures
This new max/min and alarm fridge or freezer
thermometer indicates temperature over the range of
-49.9 to 69.9 °C with a resolution of 0.1 °C/°F and
an accuracy of ±1 °C.
The thermometer features a large LCD display,
max/min memory function to record the highest and
lowest temperatures and a high/low programmable
audible alarm. The unit incorporates two temperature
sensors, a remote water resistant probe with one metre
PVC lead for the appliance temperature and an internal
sensor for the room temperature.
The remote probe can be mounted onto the fridge
internal wall using the suction pad or mounting bracket
supplied. The thermometer is housed in a durable ABS
case and incorporates a foot-stand for shelf mounting.
order code
810-225
description
£ each
digital fridge/freezer thermometer 7.50
remote probe
°C/°F
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
MAX
MIN
CATERING THERMOMETERS
Fridge or Freezer Thermometer
digital fridge/freezer
-49.9 to 69.9 °C
0.1 °C/°F
±1 °C
3 volt CR2032 lithium coin cell
3000 hours
custom LCD
16 x 50 x 82 mm
50 grams
Fridge or Freezer Thermometer
with alarm & max/min functions
z programmable high/low audible alarm
z records the max/min temperatures
This max/min and alarm fridge or freezer thermometer
indicates temperature over the range of -49.9 to 69.9 °C
with a resolution of 0.1 °C/°F and an accuracy of ±1 °C.
The thermometer features a large LCD display,
max/min memory function to record the highest and
lowest temperatures and an audible alarm. The
unit incorporates two temperature sensors, a remote
water resistant probe with one metre PVC lead for the
appliance temperature and an internal sensor for the
room temperature. The remote probe can be mounted
onto the fridge internal wall using the suction pad or
mounting bracket supplied.
The thermometer is housed in a durable ABS case and
incorporates a foot-stand for shelf mounting.
order code
810-210
description
£ each
digital fridge/freezer thermometer 9.50
fax: +44 (0) 1580 891350
remote probe
°C/°F
specification
range
resolution
accuracy
battery
battery life
display
dimensions
weight
MAX
MIN
digital fridge/freezer
-49.9 to 69.9 °C
0.1 °C/°F
±1 °C
1.5 volt AAA
5000 hours
custom LCD
15 x 52 x 73 mm
48 grams
tel: +44 (0) 1580 891300
31
CATERING THERMOMETERS
Fridge or Freezer Thermometers
digital or bi-metal dial
Ø52 mm dial thermometer
digital fridge thermometer
safety zone icon
This easy to read fridge/freezer thermometer has a
Ø52 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
The unit incorporates colour-coded zones for ease of
reading. The fridge/freezer thermometer is housed in
an ABS case that incorporates a plastic hook to hang
from a shelf.
order code
800-100
800-101
description
Ø52 mm dial thermometer
Ø52 mm dial - box of 20
£ each
1.80
32.00
The thermometer's energy saving feature turns
the unit off when deprived of light, maximising battery
life. The unit is powered by a CR2032 battery with a
life expectancy of five years. The unit is housed in an
ABS case that measures 18 x 42 x 71 mm and can be
free-standing or hung from a shelf.
order code
810-241
description
digital fridge thermometer
£ each
8.50
Ø70 mm dial thermometer
Ø50 mm dial thermometer
This fridge/freezer thermometer has a Ø70 mm dial.
The thermometer indicates temperature over the range
of -30 to 30 °C in 1 °C divisions. The unit incorporates
colour-coded zones for ease of reading.
This stainless steel, fridge/freezer thermometer has a
Ø50 mm dial. The thermometer indicates temperature
over the range of -30 to 30 °C in 1 °C divisions.
The fridge/freezer thermometer is housed in an ABS
case measuring 60 x 70 mm. The thermometer can
be free-standing or hung from a shelf.
order code
800-000
800-001
32
This digital thermometer indicates temperature over
the range of -9.9 to 49.9 °C with a 0.1 °C resolution.
The thermometer features a unique food safety zone
icon 'G' in the display that indicates when the
temperature is outside the range of 0 to 8 °C.
description
Ø70 mm dial thermometer
Ø70 mm dial - box of 10
www.aceindustrial.co.uk
£ each
2.85
22.50
The colour-coded area indicates when the thermometer
is at the correct temperature for a fridge or freezer.
The housing measures 60 x 70 mm and can be
free-standing or hung from a shelf.
order code
800-923
description
Ø50 mm dial thermometer
£ each
3.75
email: [email protected]
simulates actual food temperature
Most traditional temperature measuring devices in fridges only measure the air
temperature. This is a major problem because cold air is heavier than warm air
and therefore 'drops out of the fridge' the moment the door is opened.
why a FoodSafe thermometer?
The FoodSafe food simulant thermometer on the other hand, is an
encased thermometer that ensures that it indicates temperature similar
to that of the food stored in the fridge or chill cabinet. Therefore it is not
subject to the changes in air temperature that normally occur when the
door is opened. It is the temperature of the food that is important in
preventing the growth of food poisoning bacteria.
This easy to read FoodSafe fridge thermometer is ideal for domestic or
commercial use, as it is reliable, robust and hygienic. The thermometer
indicates temperature over the range of -25 to 40 °C with an accuracy of
±1 °C over the range of -5 to 20 °C, 2 °C thereafter. The unit is housed
in a clear plastic case with colour-coded zones that indicate when the
temperature is too warm.
CATERING THERMOMETERS
FoodSafe Fridge Thermometer
Each FoodSafe thermometer measures Ø25 x 150 mm high and is supplied
with a stainless steel hook for hanging in a fridge or cold cabinet.
order code
803-900
description
FoodSafe thermometer
£ each
6.00
Fridge or Freezer Thermometers
spirit-filled with colour-coded zones
clear spirit-filled thermometer
spirit-filled thermometers
This spirit-filled fridge/freezer thermometer is encased
in a clear ABS housing (10 x 30 x 122 mm).
The thermometer's colour-coded zones indicate
temperature over the range of -40 to 20 °C and
-40 to 80 °F with a 1 °C resolution.
These spirit-filled fridge/freezer thermometers
feature clearly marked colour-coded zones
for ease of reading.
The unit is designed to be hung from a shelf in a fridge,
freezer or cold cabinet, alternatively wall mounted
(brackets supplied). Each unit is sold singly or in boxes
of ten.
order code
803-925
803-930
description
clear spirit-filled thermometer
clear spirit-filled - box of 10
fax: +44 (0) 1580 891350
£ each
2.35
21.00
The horizontal thermometer indicates temperature over
the range of -30 to 40 °C in 1 °C divisions. The ABS
housing measures 53 x 130 mm.
The vertical thermometer indicates temperature over
the range of -30 to 40 °C in 1 °C divisions. The ABS
case measures 24 x 150 mm.
order code
803-000
803-050
description
£ each
vertical spirit-filled thermometer
1.90
horizontal spirit-filled thermometer 2.10
tel: +44 (0) 1580 891300
33
CATERING THERMOMETERS
Digital Timers
the essential tool for every kitchen
BIG & LOUD timer
TimeStick® one-handed timer
Extra
The TimeStick is a handy-sized, portable timer with
a water resistant numeric keypad. Simply hang it
around your neck, slip it in your pocket or mount it to
a magnetic surface. The countdown bar graph gives
you a quick indicator of remaining time. When the
countdown alarm sounds, the count up timer starts to
show how much time has elapsed since setting the alarm.
The Extra Big & Loud timer features a rugged
water resistant housing and variable volume control,
allowing the user to set up to a maximum volume
of 110 decibels - ideal in busy professional kitchens.
The unit also features a 12 or 24 hour format and a
keypad lock to prevent accidental key entry. The unit is
powered by a CR2032 battery.
order code
806-181
description
TimeStick
£ each
15.00
When a countdown alarm sounds, the count up timer
starts so you will see how much time elapses after your
alarm. The memory keeps your last countdown setting.
The timer incorporates two magnetic pads and a
flip-out stand. The unit measures 28 x 90 x 130 mm
and is powered by a 9 volt PP3 battery.
order code
806-160
description
extra big & loud
£ each
20.00
waterproof countdown timer
countdown/up timer
This countdown timer offers
ers
IP65 waterproof protection
n
along with a large digitall
display and audible alarm
with variable volume
control, allowing the user
to set up to a maximum
volume of 95 decibels.
This countdown/up timer incorporates a louder than
average 80 decibel audible alarm. The timer is fully
programmable, allowing the user to set the time up to
99 minutes and 59 seconds or 19 hours and 59 minutes.
The unit is powered by one AAA battery and is designed
to sit on a worktop or be attached to an appliance via
the magnetic pad at the rear of the instrument.
order code
806-105
34
description
countdown/up timer
www.aceindustrial.co.uk
£ each
9.00
The keypad allows the
user to set times up to
99 hours, 99 minutes and
99 seconds. The timer
incorporates magnetic
pads and a keyhole slot
for wall-mounting or attaching to an appliance.
The unit measures 22 x 89 x 130 mm and is powered
by two AAA batteries.
order code
806-150
description
waterproof countdown timer
£ each
14.00
email: [email protected]
CATERING THERMOMETERS
ChefAlarm®
professional cooking thermometer & timer
z temperature reading in five seconds with mini needle probe
z includes backlight & calibration function
z designed for commercial kitchens
z adjustable 92dB audible alarm
The ChefAlarm is a professional cooking thermometer
and timer which displays the countdown/up time,
current temperature and simultaneously displays both
the high/low alarms and max/min temperatures.
The timer is fully programmable, allowing the user to
set the countdown/up time to/from 99 hours and 59
minutes. The unit incorporates a large, easy to read
LCD display with user selectable backlight and a loud
audible alarm with adjustable volume to 92dB - ideal
for busy professional kitchens.
The ChefAlarm also includes a calibration function
allowing the user to fine-tune the accuracy of
the thermometer (±2.2 °C). The unit is housed in a
water resistant casing and is designed to either sit on
a worktop or attach to an appliance using the
magnetic pads at the rear of the instrument.
Each ChefAlarm is supplied in a padded zip wallet
complete with a penetration probe (810-071). See
below for probe specification.
order code
810-070
description
ChefAlarm
£ each
37.50
°C/°F
MAX
MIN
specification
range
resolution
accuracy
battery
battery life
sensor type
display
dimensions
weight
CAL
AUTO
OFF
CHECK
ChefAlarm
-50 to 300 °C
0.1 °C/°F
±1 °C (-20 to 120 °C)
2 x 1.5 volt AAA
5000 hours
thermistor
custom LCD
19 x 70 x 152 mm
175 grams
ChefAlarm® Temperature Probes
NTC thermistor probes with 2.5 mm jack plug
NEW
penetration probe
order code
£ each
This reduced tip, fast response, stainless steel,
penetration probe is moisture-resistant and ideal
for continuous monitoring in ovens or similar.
Supplied with a 1.2 metre stainless steel braided
lead. Probe temperature range -50 to 300 °C.
810-071
8.00
This miniature, stainless steel needle probe
is moisture-resistant and ideal for Sous Vide
cooking. Supplied with a 1.2 metre silicone
lead. Response time in five seconds. Probe
temperature range -50 to 300 °C.
810-072
8.50
Ø3.5 x 150 mm
NEW
mini needle probe
Ø1.5 x 100 mm
Please note: the above probes are suitable for use with the ChefAlarm only
fax: +44 (0) 1580 891350
tel: +44 (0) 1580 891300
35
CATERING THERMOMETERS
Oven Thermometers
easy to read bi-metal
Ø55 mm dial oven thermometer
Ø50 mm dial oven thermometer
This stainless steel oven thermometer features a
clear Ø55 mm dial with colour-coded zones. The
green marker indicates the minimum temperature
that commercial hot food display units should
be kept at. The oven thermometer indicates temperature
over the range of 0 to 300 °C in 10 °C divisions. The
case measures Ø43 x 66 x 80 mm.
This stainless steel oven thermometer features a clear
Ø50 mm dial with colour-coded zones. The green
marker indicates the minimum temperature that
commercial heated display units should be kept at.
The oven thermometer indicates temperature over the
range of 50 to 300 °C in 10 °C divisions. The case
measures Ø40 x 60 x 70 mm.
The thermometer can be free-standing or hung from a
shelf and should be positioned in the middle of the oven
for the most accurate temperature reading.
The unit can be free-standing or hung from a shelf and
should be positioned in the middle of the oven for the
most accurate temperature reading.
order code
800-809
description
£ each
Ø55 mm dial oven thermometer 4.75
order code
800-931
description
£ each
Ø50 mm dial oven thermometer 3.75
Digital Timer
oven & cooking thermometer
This combined clock, countdown timer and thermometer
displays both the actual and the alarm temperature over the
range of 0 to 300 °C and simultaneously the countdown or
the actual time.
The timer will count down or up from/to 23 hours, 59 minutes
and 59 seconds and the real time clock will display the time
in either a 12 or 24 hour format.
The unit features an audible high alarm that can be set from
the simple to use seven-button keypad. The alarm temperature
is continuously displayed. The unit is designed to sit on a
worktop or can be attached to an appliance via the magnetic
pads at the rear of the instrument.
The thermometer is supplied with a high temperature
probe and one metre stainless steel braided lead. The
probe has an insertion length of 150 mm (Ø4 mm) and
incorporates a reduced diameter tip to aid response time.
order code
810-060
810-061
36
description
oven thermometer & timer
replacement probe
www.aceindustrial.co.uk
£ each
17.50
6.00
°C/°F
specification
range
resolution
accuracy
battery & battery life
sensor type
display
dimensions
weight
HOLD
oven thermometer & timer
0 to 300 °C
1 °C/°F
±1 °C (0 to 130 °C)
1.5 volt AAA - 5000 hours
thermistor
triple custom LCD
21 x 75 x 128 mm
89 grams
email: [email protected]
ideal for general kitchen use
meat dial thermometers
frying thermometer
These bi-metal dial thermometers incorporate markers for
beef, lamb, pork and poultry for quick and easy reading.
The 800-804 meat thermometer features a
Ø45 mm dial with a Ø4 x 105 mm stainless steel,
pointed probe and indicates temperature over the
range of 0 to 120 °C in 1 °C divisions.
The 800-884 meat thermometer features a large
Ø60 mm dial with a Ø5 x 102 mm stainless steel,
pointed probe and indicates temperature over the
range of 20 to 100 °C in 2 °C divisions.
order code
800-804
800-884
description
£ each
Ø45 mm meat dial thermometer 4.00
Ø60 mm meat dial thermometer 5.50
milk frothing dial thermometers
This frying thermometer incorporates a Ø50 mm dial
and a pointed, stainless steel Ø4 x 150 mm probe.
The frying thermometer indicates temperature over the
range of 0 to 300 °C in 10 °C divisions.
CATERING THERMOMETERS
Cooking Thermometers
Simply insert the thermometer stem into the oil for the
most accurate temperature reading. The dial is clearly
marked for meat, poultry, fish and chips.
order code
800-805
description
frying thermometer
£ each
5.00
cook's stainless steel
thermometer
The stainless steel thermometer
indicates temperature over the
range of 40 to 200 °C and 100 to
400 °F in 2 °C/°F divisions.
The thermometer's scale is clearly
marked for hard crack, soft crack,
hard ball, soft ball, thread, jam,
caramel, sterilising and deep fry.
These barista milk frothing thermometers incorporate
a °C/°F dial with colour-coded zones that make them
fast and simple to use. Available with a Ø25 mm dial
x 130 mm probe or Ø45 mm dial x 130 or 175 mm
probe. Each thermometer is supplied with a stainless steel
jug mounting probe clip and protective probe cover.
order code
800-810
800-820
800-800
description
Ø25 x 130 mm milk dial
Ø45 x 130 mm milk dial
Ø45 x 175 mm milk dial
fax: +44 (0) 1580 891350
£ each
6.00
6.25
6.25
The thermometer's stainless steel
casing incorporates a retaining
clip and measures 50 x 240 mm
plus a 65 mm plastic handle.
Simply insert the thermometer
into the liquid or food being
measured and read the
temperature.
order code
800-806
description
cook's thermometer
£ each
10.50
tel: +44 (0) 1580 891300
37
CATERING THERMOMETERS
Catering Thermometer
accessories
wall brackets
temperature log book
These handy, stainless steel
and acrylic wall brackets
allow users to store specific
thermometers safely when not in
use (screws not supplied).
In commercial kitchens each fridge, freezer or cold
cabinet should have its own temperature log/record
book. The log book has a wipe clean cover and contains
six months' supply of easy to use record sheets.
832-200
order code
832-015
832-050
832-200
832-757
832-015
832-050
description
W/proof Therma series wall bracket
Therma series s/s wall bracket & boot
Thermapen acrylic wall bracket
DTR/PTR s/s wall bracket
£ each
10.00
12.00
7.50
14.00
Each log book allows the user to enter three readings
per day consisting of the temperature, time and initials
of the person responsible for recording the data.
order code
831-100
831-105
description
A5 temperature log book
A5 log books - pack of 10
£ each
2.00
18.00
protective silicone boots
waterproof pouches
Protect your instruments against accidental damage
by fitting them with a protective boot. We offer a wide
range of protective silicone boots tailored to fit most
of our instruments. Selected boots are now available in
red, yellow, blue, green and white.
These fully waterproof protective pouches are
manufactured from flexible TPU that can be
used to protect a variety of instruments in damp or wet
environments. Each pouch measures 115 x 190 mm.
Both the 830-400 and 830-401 are supplied with an
integral lead, plug and socket. For more information
contact our sales office or visit our website.
Therma Series boots
order code description
£ each
830-22*
Therma series - various colours
6.00
830-23*
W/proof Therma series - various colours 7.00
830-258
W/proof Therma series inc.
magnet
12.00
remove?
830-260
Thermapen
4.00
830-265
Thermapen - glow in the dark
6.00
830-280
ThermaLite
4.00
830-43*
TempTest - various colours
4.00
830-270
ThermaData Logger
5.00
830-210
BlueTherm Duo
4.00
830-750
BlueTherm Probe
4.00
*for alternative silicone boot colours contact
our sales office or visit our website
38
www.aceindustrial.co.uk
830-350
order code
830-350
830-400
830-401
830-400
description
£ each
TPU pouch
8.00
TPU pouch & thermocouple lead 30.00
TPU pouch & thermistor lead
30.00
email: [email protected]
Anti-bacterial wipes are ideal for reducing harmful bacteria in the food industry.
Each wipe is pre-saturated with a broad spectrum anti-bacterial solution that is
odourless and does not taint food. The wipes are effective against a wide
range of bacteria including listeria and salmonella.
sachets of micro-sized Probe Wipes
mini tubs of 70 ProbeWipes
These convenient, single sachet, white, anti-bacterial
thermometer Probe Wipes are safe and easy to use.
This mini tub is designed to fit into the user's pocket and
incorporates an easy to dispense flip-top lid. The mini
tub contains 70 blue anti-bacterial ProbeWipes.
Each micro-sized wipe measures 60 x 30 mm and
are designed for one-time use. These single sachet
wipes are sold in a box of 100 sachets.
order code
836-220
description
box of 100 single Probe Wipes
CATERING THERMOMETERS
Anti-bacterial Wipes
Each ProbeWipe measures 70 x 130 mm and is supplied
in cartons of ten tubs.
order code
836-020
tubs of 40 UniWipes
description
carton x 10 mini tubs
tubs of 180 ProbeWipes
tub
optional wall bracket
UniWipes are anti-bacterial wipes suitable for use
on thermometer probes, hands and everyday work
surfaces.
Measuring 85 x 210 mm, each wipe is effective
against killing pathogenic bacteria and viruses that
adhere to surfaces. Supplied in a handy can-sized
container containing 40 wipes. The UniWipes are
sold in cartons of 12 tubs.
order code
836-030
description
carton x 12 tubs of UniWipes
fax: +44 (0) 1580 891350
Each tub contains 180 blue anti-bacterial ProbeWipes
that measure 130 x 130 mm.
The tubs are supplied in cartons of six tubs of 180
ProbeWipes.
An optional wall bracket is available, enabling a single
tub of wipes to be conveniently positioned.
order code
836-050
832-305
description
carton x 6 tubs of ProbeWipes
s/steel wall bracket for single tub
tel: +44 (0) 1580 891300
39
ABOUT ACE
Ace Industrial Supplies Ltd was established in
1983 and is recognised as a leading UK distributor,
offering a comprehensive range of brand names.
We supply many specialised products to the food
sector and general industry, both in the UK and
increasingly around the world.
Located in Kent, our purpose built office and
distribution warehouse allows us to stock in excess
of 24,000 items, many of which, can be delivered
next day by our own vehicles or a courier service
is used for any national deliveries.
t: 01580 891300
e: [email protected]
www.aceindustrial.co.uk
Unit 2, Select Business Centre
Lodge Road, Staplehurst
Kent TN12 0QW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement