Hytera Models and Accessories
HYTERA MODELS
MD 782/782G
(SKU #782MDG)
Dual Modes (Analog+Digital)
MD728/782G can operate in either analog or digital Mode. It is compatible with the prevalent analog
system, ensuring a smooth analog to digital transition.
Versatile Voice Calls
Intelligent signaling of MD782/782G support various voice call types, including Private Call, Group Call
and All Call
GPS
MD782G supports viewing of GPS positioning information and sending of GPS text message.
IP Service
MD782/782G allows multiple IP functions if connected with a PC via IP address.
Various Analog Signaling Types
MD782/782G supports various analog signaling types (HDC 1200, DTMF*, 2-Tone DTMF* and 5-Tone*),
providing higher function expansion capacity.
Multiple Languages
MD782/782G supports 10 Languages (English, Simplified Chinese, Traditional Chinese, German, Spanish,
French, Italian, Polish, Russian and Turkish), allowing you to select as per your needs.
Software Upgradable
With the capability, you can enjoy further features without buying a new machine.
Specification
General
Frequency Range
VHF: 136-174MHz
or
UHF: 400-470MHz
or
UHF 3: 350-400MHz
Channel Capacity
1024
Zone Capacity
64 ch w/ a min of 15 channels
Channnel Spacing
25/20/12.5 KHz
Operating Voltage
13.6 V +
Standby <0.6A
Current Drain Receive
Frequency Standby
+ 1.5ppm
Antenna Impedance
Dimensions (HxWxD)
Weight
Front Case
LCD DISPLAY
<2.0A
50Ω
2.36x6.850x7.874 inch
1.7kg/3.75lbs
PC+ABS
220x176 pixels,262000 colors 2.0inch. 4 rows
Transmitter
RF Power
VHF High Power 50W Low Power:25W, UHF1 High
Power: 45W Low Power 25W
FM Modulation
[email protected] [email protected] [email protected]
4FSK Digital Modulation
12.5KHz Data Only: 7K60FXD 12.5KHz Data &
Voice:7K60FXW
Conducted/Radiated Emission
-36dBm<1GHz -30dBm>1GHz
Modulation Limiting [email protected][email protected][email protected]
FM Noise
[email protected] [email protected] [email protected]
Adjacent Channel Power
[email protected] [email protected]/25KHz
Audio Response
+1 ~ -3dB
Audio Distortion
<3%
Digital Vocoder Type
AMBE++SELP
DIGITAL PROTOCAL
ETSI-TS102 361-1, 2&3
Receiver
Analog
0.3uV (12dB SINAD) 0.22uV (Typical) (12dB SINAD)
Sensitivity
0.4uV (20db SINAD)
Digital
Selectivity
0.3uV/BER5%
TIA-603 ETSI [email protected] /[email protected]&25KHz [email protected]
12.5KHz /[email protected]&20KHz
Inetermodulation TIA-603 ETSI [email protected]/20/25KHz [email protected]/20/25KHz
Spurious Rejection
TIA-603 ETSI
[email protected]/20/25KHz [email protected]/20/25KHz
S/N
[email protected] [email protected] [email protected]
Rated Audio Output
3W
Rated Audio Distortion
Audio Response
Conducted Spurious Emission
Environmental Specifications
<3%
+1~3dB
<-57dBm
Operating Temperature
-30degC ~ +60degC
Storage Temperature
-40degC ~ +85degC
ESD
IEC 61000-4-2 (Level4) +8kV (Contact) + 15kV (air)
American Military Standard
MIL-STD-810 C/D/E/F
Dust & Water Intrusion
IP54 Standard
Humidity
Per MIL-STD-810 C/D/E/F Standard
Shock Vibration
Per MIL-STD-810 C/D/E/F Standard
GPS (FOR MD782G only)
TFF (Time to First Fix) Cold
Start
Horizontal Accuracy
<1 minute
<10 meters
MD652G
Lightwieght, Sleek and Stylish
(SKU #682MD)
Lightweight, Sleek and Stylish
Only 165x46x140mm in size and weighs a mere 1.05kg (including smart microphone)
Remote Control
All operations are done via the microphone and are easy to use and control.
DMO True 2-Slot
In DMO mode, Hytera provides 2-slot communication which allows the two channels on a single
frequency.
Dual-slot Pseudo Trunk
With this feature, a free time slot can be allocated to a member who needs to communicate urgently,
effectively enchancing frequency efficiency and allowing timely communication in emergency situations.
Selectable RF Power Output
Continously adjustable 1W to 25W.
Superior Voice Quality
Uses narrowband codec and digital error-correction technologies for superior voice clarity in noisy
environments or at the edge of the coverage area. Also included AGC technology for optimising voice
input and output.
Advance Signaling
Supports multiple advanced analogue signaling modes, including HDC1200, 3-Tone and 5-Tone for
better integration into existing analogue radio fleets.
Versatile Services
In addition to conventional communication services, MD562G features rich date services and selectable
functions such as Text Message. Telemetry, Emergency, OATP and GPS.
Reliable Quality
MD562G is compliant with the stringent MIL-STD-810 C/D/E/F/G and IP54 standards, ensuring
outstanding performance even in harsh environments.
Specification:
Frequency Range UHF 400-470mhz or VHF 136-174mhz
Channel Capacity 1024
Channel Spacing 25/20/12.5khz
Zone Capacity 64 (each with a maximum of 16 characters)
Operating Voltage 13.6V+15%
Standby <0.6A;Receive<2.0A;Transmit 3A(1W)
Current Drain (25W)
Frequency Stablity +0.5ppm
Antenna Impedance 50Ω
Dimensions 165x46x140mm
Transmitter
RF Power Output 1-25W
FM Modulation [email protected] [email protected] [email protected] 25KHz
12.5KHz Data Only: 7K60FXD 12.5KHz Data &
4FSK Digital Mod 7K60FXW
Conducted/Radiated
Emission -36dBm<1GHz - 30dBm>1GHz
Modulation Limiting [email protected] + 4.0KHz @ 20KHz +
5.0KHz @ 25 KHz
FM Noise 40dB @ 12.5KHz 43dB @ 20KHz 45dB
@ 256KHz*
Adjacent Channel Power 60dB @ 12.5KHz 70dB @ 20/25KHz*
Audio Response +1~ -3dB
Audio Distortion <3%
Digital Vocoder Type AMBE++ or SELP
Digital Potocol etsi-TS102 361-1, 28.3
Voice;
Receiver
0.3uV (12dB SINAD) 0.22uV (Typical)
Analog (12dB SINAD) 0.4uV
Sensitivity
Digital 0.3uV /BER5%
TIA-603: 65dB @ 12.5KHz/[email protected]&25Khz;
ETSI: 60dB
Selectivity @ 12.5KHz / 70dB @ 20&25KHz
Spurious Response TIA-603: 75db @ 12.5/20/25KHz; ETSI:70dB @
Rejection 12.5/20/25KHz
TIA-603: 75dB @ 12.5/20/25KHz: [email protected]
Intermodulation 12.5/20/25KHz*
Blocking TIA-603: 90dB; ETSI: 84dB
Hum & Noise 40dB @ 12.5KHz 43dB @ 20KHz 45dB
@ 25KHz Microphone (@20 ohm load):
1.5W; External (@8 ohm load
Radted Audio Power Output 7.5W Mircophone (@20 ohm load): 3W;
External (@8 ohm load):
Max Audio Power Output 20W
Rated Audio Distortion +3%
Audio Response +1~ -3dB
Conducted Spurious < -57dBm
Environmental Specifications
Oprating Temperature -30deg.C ~ +60deg.C
Stirage Temperature -40deg.C ~ +85deg.C
ESD IEC 61000-4.2 (level 4) +8kV (contact)
+15kV (air)
American military Standard MIL-STD-810 C/D/E/F/G
Cust & Water Intrusion IP54 Standrad
Humidity Per MIL-STD-810 C?D?E?F?G Standard
Shock & Vibration Per MIL-STDS-810 C?D?E?F?G Standard
GPS
TTFF (Time To First Fix) <1 minute
TTFF (Time To First Fix) 10 seconds
Horizontal Accuracy <10 meters
PD782/782G
(SKU #782PD)
DUAL Modes (Analog/Digital)
Ergonomic Design
The Large-size color display allows good visibility even under extremly strong light. The globally patented
industrial design ensure convenient operation and remarkable GPS performance.
Reliable Quality
PD782/782G is strictly complaint with MIL-STD-810 C/D/E/F and IP57 standards, ensuring outstanding
performance even in harsh environments.
Superior Voice
With the combined application of narrowband codec and digital erro-correction technologies,
PD782/782G is capable of ensuring your superior voice in noisy environments or at the edge of the
coverage area. In addition, the adoptiom of the AGC technology also optimizes your voice. With a builtin 1W speaker, PD782/782G ensures clear and crisp voice communication.
Durable Battery
Compared with an analog radio, PD782/782G can obtain extra 40% opration time.
Higher Spectrum Efficiency, Higher Channel Capacity
Benefitting from the TDMA technology, PD782/782G allows twice the channel based on the same
spectrum resource. This is a big help to relieve stress of increasing shortage in spectrum resource.
Dual-Slot Psuedo Trunking
With this feature, the free slot can be allocated to a member that needs to communuicate, effectively
enhancing frequency efficiency and allowing you to communicate timely under emergency situations.
Secure Communication
Besides the intrinsic encryption of the digital technology, PD782/782G provides enhanced encryption
capability (such as 256-bit encryption algorithm) and the Scrambler feature (selectable).
Versatile Services
In addition to conventional communication services, PD782/782G features rich data services and
selectable functions such as Message, Scan, Emergency, Man Down (optional), Auto Registration, High
Speed Data Transmission and Lone Worker.
Further Development Port
The reserved port in PD782/782G allows users or any third party to further develop other helpful
functions (Message, GPS, Call Control and Telemetry).
General
Frequency Range
VHF 136-174MHz or UHF1: 400-470MHz; or UHF3: 350-400MHz
Channel Capacity
1024
Zone Capacity
64 (each with a maximum of 16 channels)
Channel Spacing
25/20/12.5 KHz
\Operating Voltage
7.4V (rated)
Battery
Battery Life
2000mAH (Li-ion)
(5-5-90 Duty Cycle, High TX Power) High capacity 2000mAH Li-ion Battery
Frequency Stability
+ 1.5ppm
Antenna Impedance
50Ω
Dimensions (HxWxD)
(with standard battery w/o antenna)
125x55x37mm /4.921x2.165x1.458inch
Weight (with antenna & standard Battery)
355g /0.78lb
Front Case
PC
LCD Display
160x128 pixels, 65535 colors
Transmitter
RF Power Output
VHF High Power: 5W VHF Low Power: 1W UHF1/UHF3
High Power: 4W UHF1/UHF3 Low Power:1W
FM Modulation
[email protected] 12.5 kHz 14K0F3E @ 20 kHz 16K0F3E @ 25 kHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission
Modulation Limiting
FM Noise
Adjacent Channel Power
-36dBm<1GHz -30dBm>1GHz
[email protected] 12.5 KHz +4.0kHz @ 20 Khz [email protected] Khz
40dB @ 12.5 kHz 43dB @ 20kHz 45dB @ 25 kHz
60dB @ 12.5 kHz 70dB @ 20/25 kHz
Audio Response
+1 ~ 3dB
Audio Distortion
<3%
Digital Vocoder Type
AMBE++ or SELP
Digital Protocol
ETSI-TS102 361-1, 2&3
Receiver
Analog 0.3uV (12dB SINAD) 0.22uV (Typical) (12dB SINAD) 0.4uV (20dB SINAD) 0.3uV /BER5%
Sensitivity
Digital
60dB @ 12.5 kHz / 70dB @ 20&25 kHz 60dB @ 12.5 kHz/ 70dB @ 20&25kHz
Intermodulation TIA-603 ETS
70dB @ 12.5/20/25 kHz 65dB @ 12.5/20/25 kHz
Spurious Response Rejection TIA-603
ETSI
70dB @ 12.5/20/25 kHz 70dB @ 12.5/20/25 kHz
S/N
40dB @ 12.5 kHz [email protected] 20kHz 45dB @ 25 kHz
Rated Audio Power Output
Rated Audio Distortion
Audio Response
Conducted Spurious Emission
0.5W
+3%
+1~ -3dB
< -57 dBm
Environmental Specifications
Operating Temperature
-30degC ~ +60degC
Storage Temperature
-40degC ~ +85degC
ESD
American Military Standard
Dust & Water Intrusion
Humidity
Shock & Vibration
GPS (for PD782G only)
IEC 61000-4-2 (level 4) +8kV (contact) +15kV (air0
MIL-STD-810 C/D/E/F
IP57 Standard
Per MIL-STD-810 C/D/E/F STandard
Per MIL-STD-810 C/D/E/F Standard
TTFF (Time To First Fix)
<1 minute
TTFF (Time to First Fix) Hot Start
<10 seconds
Horizontal Accuracy
<10 meters
X1p
(SKU #PX1)
Hytera X1p, ultra-thin full power keypad digital radio, complies fully with ETSI open standard. Perfect
comnination of structural rigidity, versatile functionalities, and refined design; secure communication
ensured by AES encription algorithm & 256 digit dynamic encryption keys: convenient application
development facilitated by buit-in Bluetooth and USB port; and worry-free handling achieved by IP67
protection. All comes with a surprisinglysmall size: 21mm (1100mAh Li-ion battery) thin.
Ease of use
Easy to use with the rugged body as thin as 21mm, professional wireless headsets orcollar microphone,
palm controller and flexible antenna.
IP67 compliance
Compliance with IP67 requirements withstanding up to 1m submersion for 30 minsor more.
Rugged & reliable
Complies with MIL-STD-810 C/D/E/F/G standards and passes HALT (Highly Accelerated Lide Test)
Large-size colour display
X1p adopts a 1.8" TFT LCD display (656536 colours), allowing good visibility even underoutdoor strong
sunlight.
GENERAL
Frequecy Range
UHF: 400-470 MHz
VHF: 136-174 MHz
DMR Tier II (DMR coventional), simulcast
DMR Tier III (DMR truncking)
Analog, MPT 1327
Supported operation modes
DMR Tier ll in reference to EYSI TS 102 361-1/2/3
DMR Tier lll in reference to ETSI TS 102 361-1/2/3/4
Channel Capacity
1024
Number of zones
64
Channel Spacing (analog) 12.5/20/25 kHz
Channel spacing (digital) 12.5 kHz
Operating Voltage
7.4V (nominal
Standard battery
1100mAH (lithium-ion battery)
Battery service life (analog) (5-5-90 duty cycle, high transmitting power,
standard approx. 8 hours battery)
Battery service life (digital) (5-5-90 duty cycle, high transmitting power,
standard approx. 10 hours battery)
Frequecy Stability
+1.5 ppm
Antenna impedance
50Ω
Dimensions (HxWxD)
19.5x57x21mm (1100mAH, litium-ion battery)
(with standard battery, w/o
119.5x57x26mm (1800mAH, litium-ion battery)
antenns).
Weight (with standard battery & antenna)
approx. 240g (1100 mAH, lithium-ion battery)
approx. 280g (1800mAH, lithium-ion battery)
LCD display
160x128 pixels, 65,536 colours, 1.8 inches
4 lines
Transmitter
Transmitting power
VHF: 1W LOW /5 W HIGH
UHF: 1W LOW /4 W HIGH
Modulation
11K0F3E at 12.5 kHz
14K0F3E at 20 kHz
16K0F3E at 25 kHz
4FSK digital modulation
12.5 kHz (data only): 7K60FXD
12.5 kHz (data and voice): 7K60FXW
Interfering signals & harmonics -36 dBm < 1 GHz
-30 dBm > 1 GHz
Modulation Limiting
+2.5 kHz at 1205 kHz
+4.0 kHz at 20 kHz
+5.0 kHz at 25 kHz
Noise suppression
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent channel selectivity
60 dB at 12.5 kHz
70 dB at 20/25 kHz
Nominal audio sensitivity
+1 dB to -3dB
Nominal audio distortion
< 3%
Digital vocoder type
AMBE++
Receiver
Sensitivity (analog)
0.3 uV (12 dB SINAD)
0.22 uV (typical) (12 dB SINAD)
0.4 uV (20 dB SINAD)
Sensitivity (digital)
0.3 uV / BER 5%
Adjacent channel selectivity
TIA-603
ETSI
60 dB at 12.5 kHz / 70 dB at 20/25 kHz
60 dB at 12.5 kHz / 70 dB at 20/25 kHz
Intermodulation
TIA-603
70 dB at 12.5/20/25 kHz
ETSI
65 dB at 12.5/20/25 kHz
Spurious response rejection
TIA-603
ETSI
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
Hum and noise
40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Nominal audio distortion
Audio sensitivity
Conducted spurious emission
< 3%
+1 dB to -3dB
< -57 dBm
Ambient data
Operating temperature range
-30deg.C to +60deg.C
Storage temperature range
-40deg.C to +85deg.C
ESD
IEC 61000-4-2 (level 4)
+ 8 kV (contact discharge)
+ 15 kV (air discharge)
Protection against dust and moisture IP67
Shock & vibration resistance
Relative humidity
MIL-STD-810 C/D/E/F/G
MIL-STD-810 C/D/E/F/G
GPS
Time to first fix (TTFF) cold start
< 1 minute
Time to first fix (TTFF) warm start
< 10 seconds
Horizontal accuracy
< 10 meters
PD 682G
(SKU G682PD)
Product Description
Small, Sleek, Light
The size is 119x54x27mm, PC & Metal frameweight is 290g.
IP67 Compliance
IP67 rated withstanding up to 1m submersion for 30 minutes or more.
Rugged & Reliable
Complaint with MIL-STD-810 C/D/E/F/G
Psuedo Trunk
This virtual trunking feature allocates a free timeslot for urgent communications. This effectivity
enhances frequency effieciencyu and allows you to communicate in a timely manner in emergency
situations.
Full Band
Expanded frequency range of 400-527 MHz.
Dual Mode (Analog & Digital)
Dual mode (analog & digital) operation ensures smooth analog to digital migration.
SECURE COMMUNICATION
Provides basic/advanced digital encryption and Scrambler feature in analog mode.
Advance Signaling
Supports multiple advanced analog signaling modes, including HDC 1200, 2-Tone and 5-Tone, providing
better integration into existing analog radio fleets.
DMRA Data Service
The data protocol is fully complaint to DMRA standard.
GENERAL
Frequency Range
UHF: 400-527MHz, VHF: 136-174MHz
Channel
32
Channel Spacing
25/20/12.5KHz
Zone Capacity
3
Operating Voltage
Battery
Battery Life (5/5/90)
7.4V (rated)
1500mAh (Li-ion)(5-5-90 Duty Cycle, High TX Power)
Analog: about 11 Hours
Digital: about 16 Hours
Frequency Stability
+0.5ppm
Antenna Impedance
50Ω
Dimensions
119 x 54 x 27mm
Weight
290g
TRANSMITTER
RF Power Output
VHF High power: 5W*
VHF Low Power: 1W*
UHF High Power: 4W
UHF Low Power: 1W
FM Modulation
11K0F3E @ 12.5 KHz
14K0F3E @ 20KHz
16K0F3E @ 25KHz
4FSK Digital Modulation
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
Conducted/Radiated Emission
-36dBm<1GHz
-30dBm>1GHz
+2.5KHz @ 12.5KHz
Modulation Limiting
+4.0KHz @ 20KHz
+5.0KHz @ 25KHz
FM Noise
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25 KHz
Ajacent Channel Power
60dB @ 12.5 KHz
70dB @ 20/25KHz
Audio Response
+ 1 ~ - 3db
Audio DIstortion
<3%
Digital Vocoder Type
AMBE++ or SELP
Digital Protocol
ETSI-TS102 361-1, 2&3
RECEIVER
Analog
0.22μV (12dB SINAD)
0.22μV (Typical) (12dB SINAD)
0.4μV (20dB SINAD)
Digital
0.22μV /BER5%
Adjacent Selectivity
TIA-603
60dB @ 12.5KHz / 70dB @ 20&25KHz
ETSI
60dB @ 12.5KHz / 70dB @ 20&25KHz
Spurious Response Rejection
TIA-603
ETSI
70dB @ 12.5/20/25KHz
70dB @ 12.5/20/25KHz
Inter-modulation
TIA-603
ETSI
70dB @ 12.5/20/25KHz
65dB @ 12.5/20/25KHz
Hum & Noise
40dB @ 20 KHz
43dB @ 20 KHz
45dB @ 25 KHz
Rated Audio Power Putput
0.5W
Rated Audio Distortion
<3%
Audio Response
Conducted Spurious Emission
+ 1 ~ -3dB
< -57dBm
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-30°C -+60°C
Storage Temperature
-40°C -+85°C
ESD
IEC 61000-4-2 (level 4)
+8kV (contact)
+1.5kV (air)
American Military STandard
MIL-STD-810 C/D/E/F/G
Dust & Water Intrusion
IP67 Standard
Humidity
Per MIL-STD-810 C/D/E/F/G Standard
Shock Vibration
Per MIL-STD-810 C/D/E/F/G Standard
GPS
TTFF (Time To First Fix) Cold Start
<1 minute
TIFF (Time To First Fix) Hot Start
<10 seconds
Horizontal Accuracy
<10 meters
PD 662/662G
(SKU #662/662GPD)
GENERAL
Frequency range
VHF 136-174 MHz
UHF 400-527 MHz
Channel Capacity
1024
Zone Capacity
64
Channel Spacing
12.5 kHz (digital)
Operating Voltage
Battery
7.4 V
1500mAh (Li-ion)
approx. 11h (analog)
Battery Service life (5/5/90)
approx. 16h (digital)
Frequency Stability
+0.5 ppm
Antenna impedence
50 Ω
Dimensions (HxWxD)
4.8 x 2.7 x 1.1 inches
Weight
10.23oz
Transmitter
RF Power Out put
HF: High 5W-Low 1W
FM Modulation
11K fF3E @ 4KfF3E @ 20KHz;
(Analog Emissions Designator)
16KfF3E @ 25KHz
4FSK Digital Modulation
2.5KHz Data Only 7K6fFXD
(Digital Emissions Designator)
2.5KHz Data & Voice: 7K1FXW
Conducted/Radiated Emission
-36 dBm < 1 GHz
-30 dBm > 1 Ghz
+2.5 kHz at 12.5 kHz
Modulation limiting
+4.0 kHz at 20 kHz
+5.0 kHz at 25 kHz
40 dB at 12.5 kHz
FM Hum & Noise
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent Channel Power
60 dB at 12.5 kHz
70 db at 20/25 kHz
Audio Response
+ 1 dB to - 3 dB
Audio Distortion
< 3%
Digital vocoder type
AMBE ++ or SELP
Digital Protocol
ETSI-TS102 361-1, 2&3
Receiver
Snsitivity (analoque)
0.22 µV (typical) (12 db SINAD)
0.4 µV (20 dB SINAD)
Sensitivity (digital)
0.22 µV / BER 5%
Adjacent channel selectivity
TIA-603
ETSI
60 dB at 12.5 kHz/70 dB at 20 and 25 kHz
60 dB at 12.5 KhZ/70 dB at 20 and 25kHz
Intermodulation
TIA-603
ETSI
70 dB at 12.5/20/25 khz
70 dB at 12.5/20/25 kHz
Spurious response rejection
TIA-603
ETSI
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
40 dB at 12.5 kHz
Spurious response rejection
43 dB at 20 kHz
45 dB at 25 kHz
Nominsl audio power output
0.5 W
Nomibal audio distortion
< 3%
Audio sensitivity
Cpnducted spurious emission
+1 db to -3 dB
< -57 dBm
Ambient Specs
Operating temperature range
-30 °C to +60 °C
Storage temperature range
-40 ºC to +85 ºC
IEC 61000-4-2 (level 4)
±8 kV (contact discharge) ± 15 kV (air discharge)
Protection against dust and moisture
IP67
Shock and vibration resistance
MIL-STD-810 C/D/E/F/G
Relative humidity
MIL-STD-810 C/D/E/F/G
GPS (nur PD605G)
TTFF (cold start)
< 1 minute
TTFF (warm start)
< 10 seconds
Horizontal Accuracy
PD362
(SKU #362PD)
General
< 10 meter
Frequency Range
UHF: 430-470Mhz
Channel Capacity
256
Zone Capacity
3
Channel Spacing
25/20/12.5
Operating Voltage
7.4 (rated)
Battery
2000mAh (Li-Iom)
Battery Life (5-5-90 Duty
Analog: Above 10.5 H
Cycle, High TX Power)
Digital: Above 14 Hrs.
High-capacity 2000mAh Li-ion Battery
Frequency Stability
+1.5ppm
Antenna Impedance
50Ω
Dimension (HxWxD)(w/ Standard
bettery, w/o antenna)
125x55x35mm/4.921x2.165x1.378inch
Weight (w/antenna & standard Battery)
Front Case
335g/0.74lb
PC
Transmitter
RF Power Output
UHF1/UHF3 High Power:4W UHF1/UHF3
Low Power: 1W
PD 982
(SKU #982PD)
PD982New Member To The World's Most Complete DMR Portfolio
PD982, a new member of the already versatile DMR portfolio of Hytera, brings exceptional audio experience with
enhanced features and innovations.Hytera, a world leading solution provider of Professional Mobile Radio
communications, has launched its latest DMR (Digital Mobile Radio) handheld PD982, adding another strong
member to its top-notch DMR portfolio. The PD982offers an exceptional audio experience through noise
cancellation technology, while boasting new features including full duplex calls, recording capability via Micro SD,
Bluetooth 4.0 for audio or data and single frequency repeater mode to increase coverage.
The addition of the PD982 positions Hytera with the most complete DMR radio portfolio to meet diversified
requirements, from simple, reliable and cost-effective handsets (PD3 and PD4 series) to rugged and feature-rich
solutions (PD5 and PD6 series), up to the high-end, professional systems radios (PD7, PD9 and X1 series). The
whole portfolio offers display and non-display, GPS and non-GPS, UHF and VHF versions to allow customers to
select the best handset for their daily operation and mission critical scenarios
DESCRIBE THE PRODUCT HERE. FOR EXAMPLE: You can enjoy THIS BENEFIT using THIS FEATURE OR using THIS
FEATURE you can DO WHAT YOU WANT TO DO. YOU CAN MAKE THIS DESCRIPTION AS LONG AS NECESSARY.
DESCRIPTION
Key advanced features of PD982 include;
·
Full Duplex Call
PD982 enables frontline personnel to make telephony calls between other PD982 and telephones or mobile
phones.
·
Single Frequency Repeater Mode
Based on interference cancellation technology, the PD982 is able to use one slot to receive a signal and another
slot to transmit it in the same frequency using DMO mode to extend the communication distance.
·
Built-in Bluetooth 4.0
With integrated Bluetooth 4.0, the PD982 not only supports audio transmit, but also allows programming via
Bluetooth.
·
Noise Cancellation and 2.5W Audio Output
Maximum 2.5W output speaker and new noise cancelling technology ensure clear and loud voice communication.
·
IP68 Protection
·
Complies with the highest dust and waterproof standards, to confront the harshest environments,
The radio continues to function after submersion down to 2 meters for up to 4 hours.
·
Smart Battery
This feature makes it easier to monitor the battery status, such as battery life time and charging time. It reduces
charging time dramatically.
·
Audio Recording via Micro SD Card
Specifications:
Frequency Range
UHF:350-527MHz
Battery
2000mAh(Li-Ion)
Battery Life (5-5-90 Duty Cycle, High Power)
Large-capacity 2000mAh Li-Ion Battery
Analog:14.5h Digital: 19.5h
Weight(with antenna & standard battery)
335g
LCD Display
160x128 pixel, 65535 colors, 1.8inch, 4 rows
Zone Capacity
64(maximum of 128 channels per zone)
American Military Standard
MIL-STD-810 C/D/E/F/G
RF Power Output
UHF High Power: 4w; UHF Low Power: 1W
Channel Capacity
1024
Positioning
GPS; GLONASS
Features:
Full Duplex Call
Single Frequency Repeater Mode
Built-in Bluetooth 4.0
Noise Cancellation and 2.5W Audio Output
IP68 Protection
Smart Battery
Audio Recording via Micro SD Card
RD 982S Repeater
(SKU #982SRD)
Description
The RD982 is an open-standard DMR repeater capable of being connected via the internet to multiple sites as well
as integrated with Hytera Smart Dispatch or other3rd party GPS dispatching software.The RD982S is capable of
being upgraded to trunking at a future date as capacity requirement increase. The analog version of the RD982
provides organizations with an easy migration path to digital technology.
Dual Mode: Analog & Digital
Dual Mode Analog and Digital channel auto switching, allowing efficient frequency sharing between Analog and
Digital users and ensures a smooth transition to Digital Technology.
50W High Power
Maximum repeating power of 50W, and thus increasing the system coverage with lesser setup equipments.
16 Channels
A maximum of 16 channels, allowing efficient radio network control at different scenarios. The channel can be
performed either via RDAC PC tools, via the repeater's front panel channel knob and via the channel steering from
the repeater's rear port.
Heat Dissipation
The unique cooling design combining a built-in heat pipe and a temperature controlled fan ensures heat
diddipation, enabling the repeater to operate efficiently with full power.
Management Software
With the managment software, you can remotely monitor and diagnose a repeater. In addition, you can either
record and play back the audio freely in digital mode.
Innovative LED Design
The innovative LED and the 2.0" HD color display would deliver the repeater status clearly.
Expansion Ports
This allows third parties to develop accessory and applications via front and rear port of the repeater. This is
achived via the signal streaming and pin control through the repeaters ports.
Dual Slot Digital Audio Streaming
Streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.
Continuous Wave Identification (CWID)
Analog transmission of the repeater identification in Morse code format.
Analof Scan
Analog Voice and signaling scan, allowing coverage of different analog voice users from various groups Sites Via IP.
Multiple Sites Via IPN
Network connection via the IP port of the repeater to forma private radio network to meet data and voice
comminication needs for wide-area coverage and dispersed locations.
ACCESSORIES
RD982 Repeater
(SKU #982RD)
DESCRIPTION
POWERFUL DIGITAL REPEATER
he RD982 is Open-Standard DMR repeater capable of being connected via internet to multiple sitesmas well as
integrated with Hytera Smart Dispatch or other 3rd party GPS dispatch software. The analog version of the RD982
provides organiztions with an easy migration to digital technology.
DUAL MODE: Analog & Digital
Dual Mpde Analog and Digital Channel auto swtching, allowing efficient frequency sharing between Analog and
Digital users and ensures a smooth transition to Digital technology.
50W High Power
Maximum repeating power of 50W, and thus increasing the system coverage with lesser setup equipments.
16 Channels
A Maximum of 16 channels, allowing efficient radion network control at differrent scenarios. The channel change
can be performed either VIA rdac pc TOOLS, via the repeater's front panel channel knob and via channel steering
from the repeater's rear port.
Heat Dissipation
The unique cooling desin combining a built-in heat pipe and temperature-controlled fan ensures quick heat
dissipation, enabling the repeater to operate efficiently even with full power.
Management Software
With the management software, you can remotely monitor and diagnose a repeater. In addition, you can either
record or play back the audio freely in digital mode.
Innovative LED Design
The innovative LED and the 2.0" HD color display would deliver the repeater status clearly.
Expansion Ports
This allow third parties to develop accessory and applications via front snd rear port of the repeater. This is achived
via the signal streaming and pin control through the repeater ports.
Dual Slot Digital Audio Streaming
Streaming of both the voice slots via the rear port accessory pins, allowing third party for capability expansion.
Continuous Wave Identification (CWID)
Analog transmission of thre repeater identification in Morse code format.
Analog Scan
Analog voice and signaling scan, allowing coverage of different analog voice users from various groups. le Sites Via
IP
Multiple Sites Via IP
Network connection via IP port of the repeater to form a private radio network to meet data and voice
communication needs for wide-area coverage and dispersed locations.
Advanced TDMA Technology
The application of Time Division Multiple Accesss (TDMA) technology greatly enhances spectrum efficiency with
allows twice the users compared with that of traditional FDMA. Obviously, this can not only save infrastructure
cost anhd frequency licenses, but also releive the pressure of increasing shortage in spectrum resources.
Repeater Diagnostic And Control (RDAC)
Remote IP connection to monitor, diagnose, and control the repeater thus increasing maintenance efficiency. The
Hytera developed RDAC s able to support multiple master netwrok connections to allow the radio administrator to
monitor multiple radio networks.
Interoperability
Two repeaters can be interconnected to provide interoperability between UHF and VHF. A single repeater can suto
switch between Analog and Digital mode, allowing for efficient frequency sharing between Analog and Digital
users and an easy digital migration.
Multi SS/CDCSS Decode
Decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels showing coverage for different Analog
voice users from vaiuos groups.
Repeater Access Management
The repeater access control feature ensures a more secure netwrok by preventing unauthorized users from
accessing the radio network.
Analog/Digital Telephone Intercconnect (vis DTMF signaling)
Simplex voice communications between radio and telephone users. Its allows a radio user to make a telephone
call, or telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial
Off The Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the
Repeater to the Corporate Office System (PBX) or Public Switched Telephone Network (PSTN).
Analog Repeater Knockdown
Repeater knockdown that when activated via the repeater's rear accessory pin will disabled the transmit path of
the repeater.
General Data
Frequency range
VHF: 136-174MHz ; UHF: 400-470MHz
UHF2: 450-520MHz ; UHF3: 350-400MHz
Channel capacity
16
Channel spacing (analog)
12.5/20/25 kHz
Operating Voltage
13.6 + 15% VDC
Max. power consumotion (in Standby)
< 0.8A
Max. power consumption (during TX)
< 11A
Frequency stability
+0.5 ppm
Antenna Impedance
50Ω
Duty Cycle
100%
Dimensions (HxWxD)
Weight
3.6 x 19 x 14.4 inches
18.74lbs
Transmitter
RF Power Output
5-50 W (adjustable)
FM Modulation
11K0F3E at 12.5 kHz
(Analog Emissions Designator)
16K0F3E at 25 kHz
4FSK Digital Modulation
12.5 kHz (data and voice): 7K60FXW
14K0F3E at 20 kHz
12.5 kHz (data only): 7K60FXD
Conducted/Radiated Emission
-30 dBm > 1 GHz
-36 dBm < 1 Ghz
Modulation limiting
+4.0 kHz at 20 kHz
+2.5 kHz at 12.5 kHz
FM Hum & Noise
43 dBm at 20 kHz
Adjacent Channel Power
70 dB at 20/25 kHz
Audio Response
+5.0 kHz at 25 kHz
40 dB at 12.5 kHz
45 dB at 25 kHz
60 dB at 12.5 kHz
+ 1 dB to - 3 dB
Audio distortion
< 3%
Digital vocoder Type
AMBE++ or SELP
Digital Protocol
(Digital Emissions Designator)
ETSI-TS 102 361-1, 2 & 3
Receiver
Sensitivity (analog)
0.22 µV (typical) (12 dB SINAD)
0.3 µV (12 dB SINAD)
Sensitivity (digital)
0.3 µV / BER 5%
0.4 µV (20 dB SINAD)
Selectivity
65 dB at 12.5 kHz/75 dB at 20 and 25 khz
60 db at 12.5 kHz/70dB at 20 and 25 kHz
Intermodulation
70 dB at 12.5/20/25 kHz
75 dB at 12.5/20/25 kHz
TIA-603 ETSI
Spurious Response Rejection
80 dB at 12.5/20/25 kHz
80 dB at 12.5/20/25 kHz
TIA-603 ETSI
40 dB at 12.5 kHz
43 dB at 20 kHz
Rated Audio Power Output
0.5W
Rated Audio Distortion
<3%
Audio Response
Conducted Spurious Emission
S/N
45 dB at 25 kHz
+ 1 dB to -3dB
< -57 dBm
Environmental Specs
Operating temperature
Storage temperature range
-30 ºC to +60 ºC
-40 ºC to +85 ºC
All technical indications were tested according to the corresponding standards. Subject to change on the basis of
continuous development.
PC 38 (USB PORT)
(SKU #38PC)
Programming Cable usb port for PD782/782G models
Price: $ 65.00
PC 37 (usb Port)
(SKU #37PC)
Usb programming cable for MD782/782G
Price: $ 65.00
PC45 (usb port)
(SKU #45PC)
Programming usb port for X1p
Price: $ 65.00
SM19A1
(SKU #1A19SM)
DTMF Microphone for MD782/782G
Price: $ 162.00
SM26N1
(SKU #1N26SM)
Remote speaker microphone with emergency button for X1p radio
Price: $145.00
BL2503
(SKU #2503BL)
Replacement Battery for PD782/782G
Price: $ 130.00
BL1401
(SKU #1401BL)
Lithium-ion battery Nominal Capacity: 1400mAH, Nominal Voltage 7.4, Operating Time Analog: 10.2h,
Digital: 12.7h, Size: 77.5x55.5x9.63mm for X1P
Price: $ 130.00
RCC07
(SKU #000007)
Remote kit for MD782/782G for 2012 and newer models
BL2009
(SKU #2009BL)
Li-Ion Battery 2000mAh/7.4wh 4.2v
Price: $40.00
MOBILE WIRELES MICROPHONE KIT
(SKU #01ADA) (SKU #1W72MS)
COMMUNICATIONS BEYOND CABLE
1 Time Match: Auto contact after first connection
2 Charge methods: intelligent charger or dirextly charging RSM
3 PTT: speaker micropone/adapter PTT/Ring PTT
4. Level waterproof: Professional protection and durable use
ADA-01: Bluetooth Adapter
- Support PTT button
- Adopt with bluetooth ring PTT (POA47)
- Adopt with bluetooth microphone (SM27W1)
- Adapt with bluetooth earpiece
- Adopt with car bluetooth audio device (next version)
Communication range 10~30m
- PTT cycle=100000
-Operation Temperature: -20°~60°C
-IP Class IP54
SM27W1: Bluetooth Microphone & Speaker
-Volime and Channel Adjust
-PTT ID display
-3 Programmable Buttons
-Better penetrability
-Max speaker power -1watt
-Built-in 1100mAH battery->16 hours @ 5-5-90
-Communication range 10m
-PTT cycle = 100000
-Operation Temperature -20~60°C
-IP Class IP54
Match Model: MD78X and MD65X
PCBL2006
(SKU #6002PCB)
USB wall and mobile charger battery for Hytera PD782/782G
Price: $82.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement