Relays
Relays
industrial
interface
installation
miniature
subminiature
time
plug-in sockets
www.relpol.com.pl
2013 - 2014
Automation is our passion
The leading position
of the manufacturer of electromagnetic relays in Europe
provides for Relpol’s presence
in markets worldwide.
Commercial Partnerships of Relpol S.A.
RELPOL M Minsk / Belarus
RELPOL ELTIM Sankt-Petersburg / Russia
RELPOL ALTERA Kiev / Ukraine
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Awards, certifications
2003 year
• Europroduct 2003 for the narrow-profile line of relays PI6 and digital protection system CZIP
• Elektroproduct 2003 for relays R2, R3, R4 and sockets GZT2, GZT3, GZT4 for the relays
2004 year
• Gold Medal of Automaticon Trade Show 2004 for interface relays PI6
• The Cup of the Minister of Economy and Labor for the CZIP system, at the Energetab Trade Show 2004
2006 year
Prize at the Energetab Trade Show 2006 for programmable relays NEED
• The Product of the Year for the line of relays T-R4
•
2007 year
• Gold Medal of Automaticon Trade Show 2007 for programmable relays NEED
• The Product of the Year for programmable relays NEED
2008 year
• Gold Medal of Automaticon Trade Show 2008 for time relays PIR6WT-1Z
2010 year
• Elektroproduct 2009, award in Automation Category for programmable relays NEED
• The Polish Promotion Emblem ”Poland Now” - prize in the Best Product Category,
for the systems of stationary radioactive and nuclear radiation monitors SMP GreenLine
• Bronze Medal of Energetab Trade Show 2010 for system SMP GreenLine
2013 year
• Elektroproduct 2012, award in Automation Category for time relays MT-T
Innovative features of our technological
solutions and reliability of our products
are confirmed by numerous recognitions
and certifications BBJ, VDE, UL, CSA,
GOST, LR, CCCs, AUCOTEAM GmbH,
RoHS and by prizes and awards.
1
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Contents
Relay mounting options ...........................................4
pages
4 - 22
Subminiature signal relays
pages
23 - 31
Miniature relays
pages
32 - 107
Relay selection table................................................6
Overview............................................................. 10
RSM822.............................. 24
RSM954.............................. 27
RSM957.............................. 30
RM40.................................. 33
RM50.................................. 36
RM699B.............................. 39
RM84.................................. 43
RM84 SMT .......................... 47
RMB841 ............................. 51
RM85.................................. 54
Industrial relays
pages
108 - 160
RM85 ❶ .............................. 58
RM85 inrush........................ 61
RM85 105 oC sensitive .......... 65
RM85 SMT .......................... 69
R2...................................
109
114
R4................................... 118
RY2.................................. 123
R2M................................. 127
RM85 faston........................ 73
R3...................................
RMB851 ............................. 76
131
R15 - 4 CO ....................... 135
RUC................................. 139
RUC-M ............................. 144
RM83.................................. 93
R15 - 2 CO, 3 CO ...............
148
152
R30 ................................. 155
RS35, RS50 ..................... 158
RM87, RM87 sensitive .......... 79
RM87N SMT ........................ 85
RM96.................................. 89
RM92.................................. 97
RM94...............................
101
RA2 ❷ ..............................
105
RG25...............................
R20 .................................
❶RM85 for switching higher voltages
❷RA2 - automotive relays
2
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Contents
Interface relays
pages
161 - 207
162
PI85 with socket GZT80 ........... 166
PI84 with socket GZM80 .......... 170
PI85 with socket GZM80 .......... 174
PI84 with socket GZT80 ...........
178
PIR3 with socket GZM3 ........... 182
PIR4 with socket GZM4 ........... 186
PIR2M with socket GZ2 ........... 190
Plug-in sockets and accessories
PIR2 with socket GZM2 ...........
pages
245 - 271
GZT80, GZM80, GZS80 ................ 246
GZMB80, EC 50, PW80 ................ 247
193
PI6-1T............................... 195
PI6-1P..............................
GD50, GZT92, GZM92, GZS92 ...... 248
EC 35, GD35, ES 32, EC 32 ........... 249
GZT2, GZM2, GZMB2 ................... 250
197
PIR6W-1PS-... ................. 200
PIR6WB-1PS-... ............... 203
PI6W-1P ......................... 207
PIR6W-1P-... ....................
SU4/2D, SU4/2L, G4/2, GZT3 ..... 251
GZM3, GZT4, GZM4, GZ4 .............. 252
GS4, GZMB4, SU4D...................... 253
SU4L, G4 .................................... 254
GZY2G, GZ2, S2M, G2M ............... 255
PZ8, GZU8, GZ8, GZS8 ................. 256
Installation relays
pages
208 - 211
MT-PI-... ...........................
209
GZU11, GZ11, GZS11, GZP11 ....... 258
GOP11, GZ14U, GZ14, GOP14 ....... 259
GZ14Z, GUC11, PI6W-1P .............. 260
Mounting and sub-assemblies
of the relay and accessories
in the socket ................................. 254
Time relays
pages
GZP8, GOP8, PS11, PZ11 ............. 257
212 - 244
213
MT-TUB-... ........................ 217
MT-T..-... .......................... 221
MT-TSD-... ........................ 225
MT-TUA-... ........................
228
TR4N 1 CO, 2 CO................ 232
T-R4................................. 236
PIR15...T with module T(COM3) .240
TR4N 4 CO........................
Signalling / protecting modules
type M... ..................................... 261
Interconnection strip ZGGZ80 ......... 262
Interconnection strip ZGGZ4 ........... 263
Additional features
for industrial relays......................... 264
Test buttons (no latching) and plugs .. 265
Plug-in sockets and accessories
availability index............................. 266
Plug-in sockets technical data ......... 268
3
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Relay mounting options
Type of relay
Method of mounting
For PCB mounting
On panel
mounting
35 mm rail
mount acc. to
PN-EN 60715
Cover
with mounting
flange - on
panel mounting
Flat insert
connectors
- faston
Subminiature signal relays
RSM822
direct
–
–
–
–
–
RSM954
direct
–
–
–
–
–
RSM957
direct
–
–
–
–
–
RM40
direct
–
–
–
–
–
RM50
direct
–
–
–
–
–
RM699BV, RSR30 ❶
direct
–
–
with socket
–
–
RM699BH
direct
–
–
–
–
–
RM84
direct
with socket
with socket
with socket
–
–
RM84 SMT
direct
–
–
–
–
–
RMB841
direct
with socket
with socket
with socket
–
–
RM85
direct
with socket
with socket
with socket
–
–
RM85 ❷
direct
–
–
–
–
–
RM85 inrush
direct
with socket
with socket
with socket
–
–
RM85 105 °C sensitive
direct
with socket
with socket
with socket
–
–
RM85 SMT
direct
–
–
–
–
–
RM85 faston
direct
–
–
–
–
6,3 x 0,8 mm
RMB851
direct
with socket
with socket
with socket
–
–
RM87N
direct
with socket
with socket
with socket
–
–
RM87N sensitive
direct
with socket
with socket
with socket
–
–
RM87L
direct
with socket
with socket
with socket
–
–
RM87L sensitive
direct
with socket
with socket
with socket
–
–
RM87P
direct
with socket
with socket
with socket
–
–
Miniature relays
RM87P sensitive
direct
with socket
with socket
with socket
–
–
RM87N SMT
direct
–
–
–
–
–
RM96 1 CO
direct
–
with socket
with socket
–
–
RM96 1 NO, 1 NC
direct
–
–
–
–
–
RM83
direct
with socket
–
–
–
–
RM92
direct
with socket
–
–
–
–
RM94
direct
with socket
–
–
–
–
RA2 ❸
direct
–
–
–
–
–
R2
direct
with socket
with socket
with socket
–
–
R3
–
–
with socket
with socket
–
–
R4
direct
with socket
with socket
with socket
–
–
RY2
–
–
with socket
with socket
on request
4,8 x 0,5 mm
R2M
direct
with socket
with socket
with socket
–
–
Miniature industrial relays
❶ Solid state relay types RSR30 - see catalogue ”Solid state relays” and www.relpol.com.pl
❸ RA2 - automotive relays
❷ RM85 for switching higher voltages
4
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Relay mounting options
Type of relay
Method of mounting
For PCB mounting
On panel
mounting
35 mm rail
mount acc. to
PN-EN 60715
Cover
with mounting
flange - on
panel mounting
Flat insert
connectors
- faston
Industrial relays of small dimensions
R15 - 2 CO
direct
with socket
with socket
–
–
R15 - 3 CO
direct
with socket
with socket
–
–
R15 - 4 CO
–
with socket ❹
with socket
–
–
RUC faston 4,8x0,5
direct
with socket ❺
direct
with socket ❺
direct ❻
on request
4,8 x 0,5 mm
RUC faston 6,3x0,8
–
direct
direct ❻
on request
6,3 x 0,8 mm
direct
with socket ❺
direct
with socket ❺
direct ❻
on request
4,8 x 0,5 mm
RG25
–
–
direct
–
–
R20
–
direct
–
standard
6,3 x 0,8 mm
R30
direct
–
–
–
–
RS35, RS50
direct
–
–
–
–
PI84 with socket GZT80
–
direct
direct
–
–
PI85 with socket GZT80
–
direct
direct
–
–
PI84 with socket GZM80
–
direct
direct
–
–
PI85 with socket GZM80
–
direct
direct
–
–
PIR2 with socket GZM2
–
direct
direct
–
–
PIR3 with socket GZM3
–
direct
direct
–
–
PIR4 with socket GZM4
–
direct
direct
–
–
PIR2M with socket GZ2
–
direct
direct
–
–
PI6-1P
–
–
direct
–
–
PI6-1T
–
–
direct
–
–
PIR6W-1P-...
–
–
direct
–
–
PIR6W-1PS-...-❼
–
–
direct
–
–
PIR6WB-1PS-...-❼
–
–
direct
–
–
–
–
direct
–
–
MT-TUA-...
–
–
direct
–
–
MT-TUB-...
–
–
direct
–
–
MT-T..-...
–
–
direct
–
–
MT-TSD-...
–
–
direct
–
–
TR4N 4 CO
–
–
direct
–
–
TR4N 1 CO, 2 CO
–
–
direct
–
–
T-R4
–
with socket
with socket
–
–
PIR15...T ❾
–
direct
direct
–
–
RUC-M
Interface relays
Installation relays
MT-PI-...
Time relays
❹ Available socket to be mounted behind the assembly panel - GZ14Z. ❺ For RUC faston 4,8 x 0,5 and RUC-M, with GUC11 socket, max. switching voltages
❻ Version with adaptor (V) or (H). ❼ R - operational electromagnetic relay type RM699BV
and coil voltages of relays are limited to 250 V AC / DC.
in PIR6W.-1PS-...-R. T/C/O - operational solid state relay type RSR30 in PIR6W.-1PS-...-T (or C or O) - see catalogue ”Solid state relays” and www.relpol.com.pl
❽ With time module T(COM3)
5
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Relay selection table
Coil
Type of relay
Number and type of contacts
Subminiature signal relays
RSM822
RSM954
RSM957
Miniature relays
RM40
RM50
RM699B
RM84
RM84 SMT
RMB841
RM85
RM85 ❶
RM85 inrush
RM85 105 °C sensitive
RM85 SMT
RM85 faston
RMB851
RM87
RM87 sensitive
RM87N SMT
RM96
RM83
RM92
RM94
RA2 ❷
Miniature industrial relays
R2
R3
R4
RY2
R2M
❶RM85 for switching higher voltages
❷RA2 - automotive relays
How to use the table:
Select the number and type of contacts, please. Then, select a relay depending on its rated current, type of terminals and coil voltage.
6
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Others
4 CO
3 NO
3 CO
2 NC
2 NO
2 CO
1 NC
1 NO
1 CO
AC/DC
DC
AC
CO - changeover
NO - normally open
NC - normally closed
Others
35 mm rail mount
acc. to PN-EN 60715
panel mounting
with plug-in socket
PCB mounting
direct PCB mounting
Mounting options
Relay selection table
Type of relay
Rated current
[A]
0
5
10
15
20
25
30
Subminiature signal relays
RSM822
RSM954
RSM957
Miniature relays
RM40
1 CO: 5 A
1 NO: 8 A
RM50
RM699B
AgSnO2
RM84
RM84 SMT
RMB841
RM85
RM85 ❶
480 V AC
RM85 inrush
RM85 105 °C sensitive
RM85 SMT
RM85 faston
RMB851
RM87
RM87 sensitive
RM87N SMT
RM96
RM83
RM92
RM94
RA2 ❷
1 CO: 20 A / 12 A (NO/NC), 1 NO: 20 A, 2 NO: 2 x 12,5 A
Miniature industrial relays
R2
WT: 12 A, PCB: 10 A
R3
R4
RY2
R2M
❶RM85 for switching higher voltages
❷RA2 - automotive relays
The ordering code structure provides for formulation of numerous variants. Not all of them are defined as standard ones and,
thus, not all of them are included in the product line. However, deliveries of special versions according to the customer's
specification are possible. Please, contact with Relpol S.A. or our local representatives for details.The data of the devices may
be changed with no prior notice.
7
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Relay selection table
Coil
Type of relay
Number and type of contacts
Industrial relays of small dimensions
R15 - 2 CO
R15 - 3 CO
R15 - 4 CO
RUC
RUC-M
RG25
R20
R30
RS35, RS50
Interface relays
PI84 with socket GZT80
PI85 with socket GZT80
PI84 with socket GZM80
PI85 with socket GZM80
PIR2 with socket GZM2
PIR3 with socket GZM3
PIR4 with socket GZM4
PIR2M with socket GZ2
PI6-1P
PI6-1T
PIR6W-1P-...
PIR6W-1PS-...-❶
PIR6WB-1PS-...-❶
Installation relays
MT-PI-...
Time relays
MT-TUA-...
MT-TUB-...
MT-T..-...
MT-TSD-...
TR4N 4 CO
TR4N 1 CO, 2 CO
T-R4
PIR15...T with module T(COM3)
❶R - operational electromagnetic relay type RM699BV in PIR6W.-1PS-...-R.
T/C/O - operational solid state relay type RSR30 in PIR6W.-1PS-...-T (or C or O) - see catalogue ”Solid state relays” and www.relpol.com.pl
How to use the table:
Select the number and type of contacts, please. Then, select a relay depending on its rated current, type of terminals and coil voltage.
8
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Others
4 CO
3 NO
3 CO
2 NC
2 NO
2 CO
1 NC
1 NO
1 CO
AC/DC
DC
AC
CO - changeover
NO - normally open
NC - normally closed
Others
35 mm rail mount
acc. to PN-EN 60715
panel mounting
with plug-in socket
PCB mounting
direct PCB mounting
Mounting options
Relay selection table
Type of relay
Rated current
[A]
0
5
10
15
20
25
30
2 NO: 25 A
1 NO: 30 A
Industrial relays of small dimensions
R15 - 2 CO
R15 - 3 CO
R15 - 4 CO
RUC
RUC-M
RG25
R20
1 CO: 20 A / 10 A (NO/NC)
R30
1 NO: 30 A
RS35: 35 A, RS50: 48 A
RS35, RS50
Interface relays
PI84 with socket GZT80
PI85 with socket GZT80
PI84 with socket GZM80
PI85 with socket GZM80
PIR2 with socket GZM2
PIR3 with socket GZM3
PIR4 with socket GZM4
PIR2M with socket GZ2
AgSnO2
PI6-1P
PI6-1T
AgSnO2
PIR6W-1P-...
PIR6W-1PS-...-❶
T,C O
R: AgSnO2
PIR6WB-1PS-...-❶
T,C O
R: AgSnO2
Installation relays
MT-PI-...
2 CO, 2 NO: 8 A
1 CO, 1 NO: 16 A
2 CO: 8 A
1 CO: 16 A
Time relays
MT-TUA-...
MT-TUB-...
MT-T..-...
MT-TSD-...
TR4N 4 CO
TR4N 1 CO, 2 CO
T-R4
PIR15...T with module T(COM3)
❶R - operational electromagnetic relay type RM699BV in PIR6W.-1PS-...-R.
T/C/O - operational solid state relay type RSR30 in PIR6W.-1PS-...-T (or C or O) - see catalogue ”Solid state relays” and www.relpol.com.pl
The ordering code structure provides for formulation of numerous variants. Not all of them are defined as standard ones and,
thus, not all of them are included in the product line. However, deliveries of special versions according to the customer's
specification are possible. Please, contact with Relpol S.A. or our local representatives for details.The data of the devices may
be changed with no prior notice.
9
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Subminiature signal relays
RSM822
Subminiature relays - electromagnetic
Contacts: 2 CO
Rated load: AC1 - 1 A / 120 V AC; DC1 - 2 A / 24 V DC
Coils: DC - 3 ... 24 V (sensitive), 48 V (standard)
Mounting: for PCB
page 24
RSM954
Subminiature relays - electromagnetic
Contacts: 1 CO
Rated load: AC1 - 3 A / 120 V AC; DC1 - 3 A / 24 V DC
Coils: DC - 3 ... 24 V
Mounting: for PCB
page 27
RSM957
Subminiature relays - electromagnetic
Contacts: 1 CO
Rated load: AC1 - 2 A / 120 V AC; DC1 - 2 A / 24 V DC
Coils: DC - 3 ... 24 V (sensitive)
Mounting: for PCB
page 30
RM40
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load:
1 CO - AC1 - 5 A / 250 V AC; DC1 - 5 A / 30 V DC
1 NO - AC1 - 8 A / 250 V AC; DC1 - 8 A / 30 V DC
Coils: DC - 3 ... 48 V
Mounting: for PCB
str. 33
10
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Miniature relays
RM50
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load: AC1 - 10 A / 240 V AC; DC1 - 15 A / 24 V DC
Coils: DC - 3 ... 48 V
Mounting: for PCB
page 36
RM699B
Miniature relays - electromagnetic
Contacts: 1 CO
Rated load: AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Coils: DC - 5 ... 60 V
Mounting: for PCB, for plug-in sockets
Accessories: sockets - PI6W-1P (page 207)
page 39
RM84
Miniature relays - electromagnetic
Contacts: 2 CO, 2 NO
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Available special versions: with increased contact gap, in transparent cover
Mounting: for PCB, for plug-in sockets
page 43
Accessories: screw terminals sockets - GZT80, GZM80, GZS80; spring terminals
sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50 (pages 246-248);
signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80, GZMB80
RM84 SMT
Miniature relays - electromagnetic
Contacts: 2 CO, 2 NO
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Mounting: for surface mounting SMT
page 47
RMB841
PrzekaŸniki miniaturowe - elektromagnetyczne; bistable with one coil
Contacts: 2 NO
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 3 ... 24 V
Available special versions: in transparent cover
Mounting: for PCB, for plug-in sockets
str. 51
Accessories: screw terminals sockets - GZT80, GZM80, GZS80;
spring terminals sockets - GZMB80;
sockets for PCB - EC 50, PW80, GD50 (pages 246-248)
11
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Miniature relays
RM85
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Available special versions: with increased contact gap, in transparent cover
Mounting: for PCB, for plug-in sockets
page 54
RM85
special version
Accessories: screw terminals sockets - GZT80, GZM80, GZS80; spring terminals
sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50 (pages 246-248);
signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80, GZMB80
Miniature relays - electromagnetic,
for switching higher voltages - up to 480 V AC
Contacts: 1 NO
Rated load: AC1 - 5 A / 480 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 3 ... 110 V
Mounting: for PCB
page 58
RM85 inrush
Miniature relays - electromagnetic
Contacts: 1 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 3 ... 110 V
Mounting: for PCB, for plug-in sockets
Accessories: screw terminals sockets - GZT80, GZM80, GZS80; spring terminals
sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50 (pages 246-248);
signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80, GZMB80
page 61
RM85
105 oC sensitive
Miniature relays - electromagnetic, ambient temperature up to 105 oC
Contacts: 1 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 5 ... 48 V (sensitive)
Mounting: for PCB, for plug-in sockets
page 65
Accessories: screw terminals sockets - GZT80, GZM80, GZS80; spring terminals
sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50 (pages 246-248);
signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80, GZMB80
RM85 SMT
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Mounting: for surface mounting SMT
page 69
12
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Miniature relays
RM85 faston
Miniature relays - electromagnetic
Contacts: 1 NO
Rated load: AC1 - 20 A / 250 V AC; DC1 - 20 A / 24 V DC
Coils: DC - 5 ... 48 V (sensitive)
Mounting: for PCB, for flat insert connectors - faston 250 (6,3 x 0,8 mm)
page 73
RMB851
PrzekaŸniki miniaturowe - elektromagnetyczne; bistable with one coil
Contacts: 1 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 3 ... 24 V
Available special versions: in transparent cover
Mounting: for PCB, for plug-in sockets
str. 76
Accessories: screw terminals sockets - GZT80, GZM80, GZS80;
spring terminals sockets - GZMB80;
sockets for PCB - EC 50, PW80, GD50 (pages 246-248)
RM87
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load: AC1 - 12 A / 250 V AC; DC1 - 12 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Available special versions: with increased contact gap, in transparent cover
Mounting: for PCB, for plug-in sockets
page 79
RM87 sensitive
Accessories: screw terminals sockets - GZT80, GZM80, GZS80, GZT92, GZM92, GZS92;
spring terminals sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50, EC 35, GD35
(pages 246-249); signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80,
GZT92, GZM92, GZS92, GZMB80
Miniature relays - electromagnetic
Contacts: 1 NO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Coils: DC - 5 ... 48 V (sensitive)
Mounting: for PCB, for plug-in sockets
page 79
RM87N SMT
Accessories: screw terminals sockets - GZT80, GZM80, GZS80, GZT92, GZM92, GZS92;
spring terminals sockets - GZMB80; sockets for PCB - EC 50, PW80, GD50, EC 35, GD35
(pages 246-249); signalling / protecting modules type M... for sockets: GZT80, GZM80, GZS80,
GZT92, GZM92, GZS92, GZMB80
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load: AC1 - 12 A / 250 V AC; DC1 - 12 A / 24 V DC
Coils: DC - 3 ... 110 V; AC - 12 ... 240 V
Mounting: for surface mounting SMT
page 85
13
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Miniature relays
RM96
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO, 1 NC
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 5 ... 48 V
Mounting: 1 CO - for PCB, for plug-in sockets
1 NO, 1 NC - for PCB
Accessories: screw terminals sockets - ES 32 (page 249);
signalling / protecting modules type M... for sockets ES 32
page 89
RM83
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO, 1 NC
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 5 ... 110 V (standard), 110 V (sensitive)
Available special versions: in transparent cover
Mounting: for PCB, for plug-in sockets
Accessories: sockets for PCB - EC 50, PW80, GD50 (pages 247-248)
page 93
RM92
Miniature relays - electromagnetic
Contacts: 1 CO, 1 NO, 1 NC
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 6 ... 80 V (standard), 5 ... 60 V (sensitive)
Available special versions: in transparent cover
Mounting: for PCB, for plug-in sockets
Accessories: sockets for PCB - EC 35, GD35 (page 249)
page 97
RM94
Miniature relays - electromagnetic
Contacts: 2 CO, 2 NO, 2 NC
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 6 ... 110 V (standard), 5 ... 110 V (sensitive)
Available special versions: in transparent cover
Mounting: for PCB, for plug-in sockets
Accessories: sockets for PCB - EC 50, PW80, GD50 (pages 247-248)
page 101
RA2
Miniature relays - automotive relays
Contacts: 1 CO, 1 NO, 2 NO
Rated current: 1 CO (NO/NC) - 20 A / 12 A; 1 NO - 20 A; 2 NO - 2 x 12,5 A
Coils: DC - 5 ... 48 V
Mounting: for PCB
page 105
14
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Industrial relays
R2
- contacts 2 CO
Industrial relays - electromagnetic
Contacts: 2 CO, 3 CO, 4 CO
Rated load:
2 CO - AC1 - 12 A / 250 V AC; DC1 - 12 A / 24 V DC
3 CO - AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
4 CO - AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Coils: DC - 5 ... 220 V; AC - 6 ... 240 V
page 109
R3
- contacts 3 CO
page 114
R4
- contacts 4 CO
Additional features:
standard - mechanical indicator (W), lockable front test button (T)
option - light indicator - LED diode (L), surge suppression element - diode (D) Mounting:
R2, R4 - for plug-in sockets, for PCB
R3 - for plug-in sockets
Accessories:
R2 - screw terminals sockets - GZT2, GZM2;
spring terminals sockets - GZMB2;
sockets for PCB - SU4/2D;
solder terminals sockets - SU4/2L, G4/2 (pages 250-251);
R3 - screw terminals sockets - GZT3, GZM3 (pages 251-252);
R4 - screw terminals sockets - GZT4, GZM4, GZ4, GS4;
spring terminals sockets - GZMB4;
sockets for PCB - SU4D;
solder terminals sockets - SU4L, G4 (pages 252-254);
signalling / protecting modules type M... for sockets:
GZT2, GZM2, GZMB2, GZT3, GZM3, GZT4, GZM4, GZMB4
page 118
RY2
Industrial relays - electromagnetic
Contacts: 2 CO
Rated load: AC1 - 12 A / 250 V AC; DC1 - 12 A / 30 V DC
Coils: DC - 5 ... 220 V; AC - 6 ... 240 V
Additional features: option - light indicator - LED diode (L),
surge suppression element - diode (D)
Mounting: for plug-in sockets, for flat insert connectors - faston 187 (4,8 x 0,5 mm)
- direct on panel (cover with mounting flange)
page 123
Accessories: screw terminals sockets - GZY2G (page 255)
R2M
Industrial relays - electromagnetic
Contacts: 2 CO
Rated load: AC1 - 5 A / 250 V AC; DC1 - 5 A / 24 V DC
Coils: DC - 6 ... 110 V; AC - 6 ... 240 V
Mounting: for plug-in sockets, for PCB
Accessories: screw terminals sockets - GZ2; sockets for PCB - S2M;
solder terminals sockets - G2M (page 255)
page 127
15
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Industrial relays
R15
- contacts 2 CO
Industrial relays - electromagnetic
Contacts: 2 CO, 3 CO, 4 CO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Coils: DC - 6 ... 220 V; AC - 6 ... 240 V; DC - 0,1 ... 2,5 A; AC - 0,1 ... 4,5 A
page 131
R15
- contacts 3 CO
Additional features:
R15 - 2 CO, 3 CO standard - mechanical indicator (W), lockable front test button (T)
R15 - 2 CO, 3 CO option - light indicator - LED diode (L),
surge suppression element - diode (D), varistor (V)
R15 - 4 CO option - test button without block functions (K),
light indicator - LED diode (L), surge suppression element - diode (D)
Mounting: for plug-in sockets
Accessories:
R15 - 2 CO - screw terminals sockets, for mounting: on 35 mm rail mount or on panel
- PZ8, GZS8, GZP8; on 35 mm rail mount - GZU8; on panel - GZ8;
solder terminals sockets - GOP8 (pages 256-257)
R15 - 3 CO - screw terminals sockets, for mounting: on 35 mm rail mount or on panel
- PS11, PZ11, GZS11, GZP11; on 35 mm rail mount - GZU11; on panel - GZ11;
solder terminals sockets - GOP11 (pages 257-259)
page 131
R15
R15 - 4 CO - screw terminals sockets, for mounting: on 35 mm rail mount - GZ14U;
on panel - GZ14; on panel, behind: GZ14Z;
solder terminals sockets - GOP14 (pages 259-260)
- contacts 4 CO
page 135
RUC
faston 4,8 x 0,5
Industrial relays - electromagnetic
Contacts: 2 CO, 3 CO, 2 NO, 3 NO
(available special versions 2 NO, 3 NO with contact gap  3 mm)
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 6 ... 220 V (standard), 12 ... 220 V (reinforced); AC - 6 … 400 V
Additional features: option - test button without block functions (K),
light indicator - LED diode (L)
page 139
RUC
faston 6,3 x 0,8
Mounting:
RUC faston 4,8 x 0,5 - for plug-in sockets, direct on panel (cover with mounting flange),
direct on 35 mm rail mount (cover with adaptors: vertical V, horizontal H)
RUC faston 6,3 x 0,8 - direct on panel (cover with mounting flange),
direct on 35 mm rail mount (cover with adaptors: vertical V, horizontal H)
RUC - for PCB
Accessories: screw terminals sockets - GUC11 (page 260)
page 139
16
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Industrial relays
RUC-M
faston 4,8 x 0,5
Industrial relays - electromagnetic; with permanent magnet whose magnetic field
blows the electric arc between the contacts; for high DC loads
Contacts: 1 NO (double-break), 2 NO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 12 A (1 NO); 4,5 A (2 NO) / 220 V DC
Coils: DC - 12 ... 220 V (reinforced); AC - 12 ... 240 V
Additional features: option - light indicator - LED diode (L)
Mounting: for plug-in sockets, direct on panel (cover with mounting flange),
direct on 35 mm rail mount (cover with adaptors: vertical V, horizontal H), for PCB
page 144
Accessories: screw terminals sockets - GUC11 (page 260)
RG25
Industrial relays - electromagnetic
Contacts: 2 NO
Rated load: AC1 - 25 A / 400 V AC; DC1 - 25 A / 24 V DC
Coils: DC - 12 ... 220 V; AC - 12 ... 400 V
Mounting: direct on 35 mm rail mount
page 148
R20
Industrial relays - electromagnetic
Contacts: 1 NO, 2 NO
Rated load:
1 NO - AC1 - 30 A / 250 V AC
2 NO - AC1 - 25 A / 250 V AC
Coils: DC - 12 ... 110 V; AC - 24 ... 230 V
Mounting: for flat insert connectors - faston 250 (6,3 x 0,8 mm)
- direct on panel (cover with mounting flange)
page 152
R30
Industrial relays - electromagnetic
Contacts: 1 CO, 1 NO
Rated load:
1 CO (NO/NC) - AC1 - 20 A / 10 A / 240 V AC; DC1 - 20 A / 10 A / 30 V DC
1 NO - AC1 - 30 A / 240 V AC; DC1 - 30 A / 30 V DC
Coils: DC - 12 ... 24 V
Mounting: for PCB
page 155
RS35, RS50
Industrial relays - electromagnetic; to control power in photovoltaic systems
which generate electric energy
Contacts: 2 NO
Rated load:
RS35 - AC1 - 35 A / 250 V AC; DC1 - 35 A / 24 V DC
RS50 - AC1 - 48 A / 250 V AC; DC1 - 48 A / 24 V DC
Coils: DC - 5 ... 110 V
Mounting: for PCB
page 158
17
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Interface relays
PI84 - GZT80
Interface relays; with plug-in socket GZT80
Contacts: 2 CO
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay RM84, plug-in socket GZT80,
module type M..., clip GZT80-0040, description plate GZT80-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ80
page 162
PI85 - GZT80
Interface relays; with plug-in socket GZT80
Contacts: 1 CO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay RM85, plug-in socket GZT80,
module type M..., clip GZT80-0040, description plate GZT80-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ80
page 166
PI84 - GZM80
Interface relays; with plug-in socket GZM80
Contacts: 2 CO
Rated load: AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay RM84, plug-in socket GZM80,
module type M..., clip GZT80-0040, description plate GZT80-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ80
page 170
PI85 - GZM80
Interface relays; with plug-in socket GZM80
Contacts: 1 CO
Rated load: AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay RM85, plug-in socket GZM80,
module type M..., clip GZT80-0040, description plate GZT80-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ80
page 174
18
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Interface relays
PIR2 - GZM2
Interface relays; with plug-in socket GZM2
Contacts: 2 CO
Rated load: AC1 - 12 A / 250 V AC; DC1 - 12 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay R2, plug-in socket GZM2,
module type M..., clip GZT4-0040, description plate GZT4-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ4
page 178
PIR3 - GZM3
Interface relays; with plug-in socket GZM3
Contacts: 3 CO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay R3, plug-in socket GZM3,
module type M..., clip GZT4-0040, description plate GZT4-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ4
page 182
PIR4 - GZM4
Interface relays; with plug-in socket GZM4
Contacts: 4 CO
Rated load: AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Coils: DC - 12 ... 110 V; AC - 12 ... 230 V
Set: electromagnetic relay R4, plug-in socket GZM4,
module type M..., clip GZT4-0040, description plate GZT4-0035
Mounting: direct on 35 mm rail mount or on panel
Accessories: interconnection strip ZGGZ4
page 186
PIR2M - GZ2
Interface relays; with plug-in socket GZ2
Contacts: 2 CO
Rated load: AC1 - 5 A / 250 V AC; DC1 - 5 A / 24 V DC
Coils: DC - 6 ... 110 V; AC - 6 ... 230 V
Set: electromagnetic relay R2M, plug-in socket GZ2,
clip GZ2 1060, two spring clamps GZ2 1111
Mounting: direct on 35 mm rail mount or on panel
page 190
19
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Interface relays
PI6-1P
Interface relays
Output circuit - contacts: 1 CO (AgSnO2)
Rated load: AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Input circuit: DC - 12 ... 36 V; AC/DC - 24 ... 230 V
Indicator: LED diode
Mounting: direct on 35 mm rail mount
Accessories: interconnection strip ZG20
page 193
PI6-1T
Interface relays
Output circuit - triac: 1 NO Rated load: AC1 - 1,2 A / 400 V AC
Input circuit: DC - 5..32 V; AC/DC - 24 ... 230 V
Indicator: LED diode
Mounting: direct on 35 mm rail mount
Accessories: interconnection strip ZG20
page 195
PIR6W-1P
Interface relays; with socket PI6W-1P -...
Output circuit - contacts: 1 CO (RM699BV - AgSnO2)
Rated load: AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Input circuit: DC - 12 ... 36 V; AC/DC - 24 ... 230 V
Indicator: LED diode
Mounting: direct on 35 mm rail mount
Accessories: interconnection strip ZG20
page 197
PIR6W-1PS
Interface relays; with universal socket PI6W-1PS -...
Output circuit - contacts: 1 CO (RM699BV - AgSnO2); triac, transistor: 1 NO (RSR30)
Rated load:
1 CO - AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
1 NO (triac) - AC1 - 1 A / 240 V AC; 1 NO (transistors) - DC1 - 1 A / 48 V DC, 2 A / 24 V DC
Input circuit: DC - 6 ... 60 V; AC/DC - 24 ... 230 V
Indicator: LED diode
Mounting: direct on 35 mm rail mount
Accessories: interconnection strip ZG20
page 200
PIR6WB-1PS
CAGE CLAMP
®
Interface relays; with universal socket PI6WB-1PS -...; spring terminals
Output circuit - contacts: 1 CO (RM699BV - AgSnO2); triac, transistor: 1 NO (RSR30)
Rated load:
1 CO - AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
1 NO (triac) - AC1 - 1 A / 240 V AC; 1 NO (transistors) - DC1 - 1 A / 48 V DC, 2 A / 24 V DC
Input circuit: DC - 6 ... 60 V; AC/DC - 24 ... 230 V
Indicator: LED diode
Mounting: direct on 35 mm rail mount
page 203
Accessories: interconnection strip ZG20
20
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Installation relays / Time relays
MT-PI
Installation relays; modular cover
Contacts: 1 CO, 2 CO, 1 NO, 2 NO
Rated load:
1 CO, 1 NO - AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
2 CO, 2 NO - AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Coils: 1 CO, 2 CO - DC - 12 ... 48 V; AC - 115 ... 230 V
1 NO, 2 NO - AC - 230 V; AC/DC - 12 ... 115 V
Indicator: LED diode
page 209
Mounting: direct on 35 mm rail mount
MT-TUA
Time relays; modular cover
Multifunctions - 10 time functions (E, Wu, Bp, Bi, T, R, Ws, Wa, Esa, B)
+ function ON / OFF; 8 time ranges - setting time T
Output circuit - contacts: 1 CO Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Input circuit: AC/DC - 12...240 V; external control contact
Indicator: LEDs diode
Mounting: direct on 35 mm rail mount
page 213
MT-TUB
Time relays; modular cover
Multifunctions - 10 time functions (E, Wu, Bp, Bi, Ra, Esf, Wi, Wst, Est, Esp)
+ function ON / OFF; 8 time ranges - setting time T
Output circuit - contacts: 1 CO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Input circuit: AC/DC - 12...240 V; external control contact
Indicator: LEDs diode
Mounting: direct on 35 mm rail mount
page 217
MT-T..
Time relays; modular cover
Single-functions - 7 versions (time functions: ER, EWa, EWs, EWu + NWu, li + lp,
WsWa, Wt); 7 time ranges - independent setting times T1 and T2
Output circuit - contacts: 1 CO Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Input circuit: AC/DC - 12...240 V; external control contact
Indicator: LEDs diode
Mounting: direct on 35 mm rail mount
page 221
MT-TSD
Time relays; modular cover
Star-Delta start-up
7 time ranges - setting time T1: 0,05 s ... 1 h; time T2: 0,05 s ... 1 s
Output circuit - contacts: 2 x 1 CO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Input circuit: AC/DC - 12...240 V
Indicator: LEDs diode
Mounting: direct on 35 mm rail mount
page 225
21
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Time relays
TR4N
- 4 CO
Time relays; compact cover
Multifunctions - 10 time functions (E, Wu, Bp, Bi, PWM, R, Ws, Wa, Esa, B)
+ function ON / OFF; 8 time ranges - setting time T
Output circuit - contacts: 4 CO
Rated load: AC1 - 6 A / 250 V AC; DC1 - 6 A / 24 V DC
Input circuit: AC - 115 ... 230 V; AC/DC - 12 ... 24 V; external control contact
Indicator: LEDs diode
Mounting: direct on 35 mm rail mount
page 228
TR4N
- 1 CO, 2 CO
Time relays; compact cover
Multifunctions - 10 time functions (E, Wu, Bp, Bi, PWM, R, Ws, Wa, Esa, B)
+ function ON / OFF; 8 time ranges - setting time T
Output circuit - contacts: 1 CO, 2 CO
Rated load: 1 CO - AC1 - 16 A / 250 V AC; DC1 - 16 A / 24 V DC
2 CO - AC1 - 8 A / 250 V AC; DC1 - 8 A / 24 V DC
Input circuit: AC - 115 ... 230 V; AC/DC - 12 ... 24 V; external control contact
Indicator: LEDs diode
page 232
Mounting: direct on 35 mm rail mount
T-R4 - GZM4
Time relays; with plug-in socket GZM4 or GZT4, GZMB4
Single-functions - 4 versions (time functions: E, Wu, Bp, Bi)
7 time ranges - settings time T (0,1 s ... 100 h)
Output circuit - contacts: 4 CO
Rated load: AC1 - 6 A / 230 V AC
Input circuit: DC - 12 ... 24 V; AC - 24 ... 230 V
Indicator: LEDs diode; Mounting: for plug-in sockets
page 236
Accessories: screw terminals sockets, for mounting on 35 mm rail mount or on panel - GZM4, GZT4;
spring terminals sockets, for mounting on 35 mm rail mount - GZMB4
PIR15...T
Time relays; with time module T (COM3)
Multifunctions - 8 time functions (E, Wu, Bp, Bi, R, Ws, Wa, Es)
8 time ranges - settings time T (0,1 s ... 10 d)
Output circuit - contacts: 2 CO, 3 CO
Rated load: AC1 - 10 A / 250 V AC; DC1 - 10 A / 24 V DC
Input circuit: DC - 24 ... 220 V; AC - 24 ... 240 V; external control contact
Set: electromagnetic relay R15 - 3 CO (2 CO), plug-in socket GZP11 (GZP8),
time module T(COM3), clip GZP-0054, description plate GZP-0035
page 240
Indicator: LED diode; Mounting: direct on 35 mm rail mount or on panel
22
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RSM822.............................. 24
RSM954.............................. 27
RSM957.............................. 30
Subminiature
signal relays Subminiature relays are applied in e.g. telecommunication devices, office equipment, alarm systems,
measurement devices, medical monitoring devices, AV devices, control sensors.
Their major features which provide for their applications in electronic circuits as interface-control units are:
- miniature dimensions,
- high switching capacity,
- high resistance of the cover to difficult operating conditions,
- wide range of control voltages.
Space-saving of the electronic plates, low power consumption of the control circuits, a few applicable
mounting technologies are only few of the advantages offered by the aforementioned features.
The relays are recognized and certified by:
They meet the requirements of RoHS Directive.
RSM822
subminiature signal relays
• Subminiature monostable relays for switching low loads • DC coils
- standard and sensitive of up to 48 V DC, low coil power 0,20 W
(sensitive version) or 0,36 W (standard version) • Mounting on printed
circuit boards • Operation possible at high temperature and in chemical
environment • Sealed, for wave soldering and cleaning • Applications:
for telephone equipment, household equipment, office equipment,
AV devices, control devices - remote control devices
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
DC
DC
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
General data
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
1 800 cycles/hour
Mechanical life
18 000 cycles/hour
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
2 CO
AgPd/Au 0,2 µm
120 V / 120 V
1V
1 A / 120 V AC
2 A / 24 V DC
1 mA
2A
120 VA
1 mW
 100 m
3 ... 24 V sensitive version DC:  0,1 Un
see Tables 1, 2
0,20 W sensitive version 1 000 V AC
500 V AC
48 V standard version
0,36 W standard version
type of insulation: basic
type of clearance: micro-disconnection
 1,3 mm
 1,5 mm
8 ms / 4 ms sensitive version
> 105
1 A, 120 V AC
> 107
21 x 10,1 x 12,1 mm
4,8 g
-30...+80 oC
IP 64
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
max. 235 oC
max. 3,5 s
6 ms / 4 ms standard version
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
24
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RSM822
subminiature signal relays
Coil data - DC voltage version, sensitive
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S003
3
45
± 10%
2,25
4,5
S005
5
125
± 10%
3,75
7,5
S006
6
180
± 10%
4,50
9,0
S009
9
405
± 10%
6,75
13,5
S012
12
720
± 10%
9,00
18,0
S024
24
2 880
± 10%
18,00
36,0
Coil data - DC voltage version, standard
Coil code
Rated voltage
V DC
1048
Table 2
Coil resistance
at 20 °C

48
6 400
Acceptable
resistance
± 10%
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
36,00
72,0
Connection diagram (pin side view)
Dimensions
2 CO
Fig. 1
Fig. 2
Electrical life
Temperature rise [°C]
Number of cycles [x 104 ]
Coil temperature rise Current of load [A]
Coil power [W]
1 - resistive load 24 V DC
2 - inductive load 24 V DC L/R=40 ms
25
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RSM822
subminiature signal relays
Pinout (solder side view)
Mounting
Relays RSM822 are designed for direct PCB mounting.
2 CO
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Tables 1, 2 page 25
Contact material
61 - AgPd/Au 0,2 µm
Number and type of contacts
12 - 2 CO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Examples of ordering code:
RSM822-6112-85-S005
RSM822-6112-85-1048
relay RSM822, for PCB, two changeover contacts, contact material AgPd/Au 0,2 µm,
sensitive coil voltage 5 V DC, in cover IP 64
relay RSM822, for PCB, two changeover contacts, contact material AgPd/Au 0,2 µm,
standard coil voltage 5 V DC, in cover IP 64
26
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RSM954
subminiature signal relays
• Subminiature, monostable relays
• Small dimensions
• DC coils of up to 24 V DC, low coil power 0,36 W
• Sealed, for wave soldering and cleaning
• Applications: for telecommunication devices, office equipment,
industrial control, etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
DC
DC
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
General data
1 CO
Ag/Au 0,2 µm
120 V / 120 V
5V
3 A / 120 V AC
3 A / 24 V DC
10 mA
3A
360 VA
50 mW
 100 m
3 ... 24 V
DC:  0,05 Un
see Table 1
0,36 W
500 V AC 500 V AC type of insulation: basic
type of clearance: micro-disconnection
 1,2 mm
 2 mm
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
1 800 cycles/hour
• resistive DC1
1 800 cycles/hour
Mechanical life
18 000 cycles/hour
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
8 ms / 4 ms
> 105
3 A, 120 V AC
> 105
3 A, 24 V DC
> 107
15,4 x 10,4 x 11,4 mm
3,5 g
-25...+55 oC
IP 64
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
max. 235 oC
max. 3,5 s
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
27
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RSM954
subminiature signal relays
Coil data - DC voltage version, sensitive
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
25
± 10%
2,25
3,9
1005
5
69
± 10%
3,75
6,5
1006
6
100
± 10%
4,50
7,8
1009
9
225
± 10%
6,75
11,7
1012
12
400
± 10%
9,00
15,6
1024
24
1 600
± 10%
18,00
31,2
Connection diagram (pin side view)
Dimensions
1 CO
Fig. 1
Temperature rise [°C]
Coil power [W]
A - operating time
B - release time
28
www.relpol.com.pl
Fig. 2
Operating / release time
Time [ms]
Coil temperature rise Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Coil power [W]
RSM954
subminiature signal relays
Fig. 3
Electrical life
Pinout (solder side view)
Number of cycles [ x 104 ]
1 W - Wechsler
Mounting
Relays RSM954 are designed for direct PCB mounting.
Current of load [A]
1 - resistive load 24 V DC
2 - inductive load 24 V DC L/R=40 ms
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Table 1 page 28
Contact material
01 - Ag/Au 0,2 µm
Number and type of contacts
11 - 1 CO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Example of ordering code:
RSM954-0111-85-1005
relay RSM954, for PCB, one changeover contact, contact material Ag/Au 0,2 µm, coil
voltage 5 V DC, in cover IP 64
29
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RSM957
subminiature signal relays
• Subminiature, monostable relays
• Very small dimensions
• DC coils - sensitive of up to 24 V DC, low coil power 0,15...0,20 W
• Sealed, for wave soldering and cleaning
• Applications: for telecommunication devices, office equipment,
industrial control, etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
DC
DC
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
1 CO
Ag/Au 0,2 µm
120 V / 125 V
5V
2 A / 120 V AC
2 A / 24 V DC
10 mA
2A
240 VA
50 mW
 100 m
3 ... 24 V
DC:  0,05 Un
see Table 1
0,15 W 3 ... 12 V 1 000 V AC
400 V AC 0,20 W 24 V
type of insulation: basic
type of clearance: micro-disconnection
 0,6 mm
 0,6 mm
General data
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
1 800 cycles/hour
• resistive DC1
1 800 cycles/hour
Mechanical life
18 000 cycles/hour
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
5 ms / 5 ms
> 105
2 A, 120 V AC
> 105
2 A, 24 V DC
> 107
12,6 x 7,8 x 10 mm
2,2 g
-30...+70 oC
IP 64
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
max. 235 oC
max. 3,5 s
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, sensitive
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S003
3
60
± 10%
2,4
3,9
S005
5
167
± 10%
4,0
6,5
S006
6
240
± 10%
4,8
7,8
S009
9
540
± 10%
7,2
11,7
S012
12
960
± 10%
9,6
15,6
S024
24
2 880
± 10%
18,0
31,2
30
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RSM957
subminiature signal relays
Connection diagram (pin side view)
Dimensions
1 CO
Pinout (solder side view)
Mounting
Relays RSM957 are designed for direct PCB mounting.
1 CO
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Contact material
01 - Ag/Au 0,2 µm
see Table 1 page 30
Number and type of contacts
11 - 1 CO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Example of ordering code:
RSM957-0111-85-S005
relay RSM957, for PCB, one changeover contact, contact material Ag/Au 0,2 µm,
sensitive coil voltage 5 V DC, in cover IP 64
31
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM40.................................. 33
RM50.................................. 36
RM699B.............................. 39
RM84.................................. 43
RM84 SMT .......................... 47
RMB841 ............................. 51
RM85.................................. 54
RM85 ❶ .............................. 58
RM85 inrush........................ 61
RM85 105 oC sensitive .......... 65
RM85 SMT .......................... 69
RM85 faston........................ 73
RMB851 ............................. 76
RM87, RM87 sensitive .......... 79
RM87N SMT ........................ 85
RM96.................................. 89
RM83.................................. 93
RM92.................................. 97
RM94...............................
101
RA2 ❷ ..............................
105
❶RM85 for switching higher voltages
❷RA2 - automotive relays
Miniature relays
Owing to their universality, miniature relays may be applied in alarm systems, as interface systems
in industrial automation, power-electric systems, lighting control systems (e.g. in daylight-saving switches),
staircase lighting control systems, emergency lighting control systems, time relays as their output terminals,
control systems of household and catering industry equipment, and in numerous electric systems.
The basic features of the miniature relays are:
- wide range of coil voltages, AC and DC coils,
- rated contact switching currents up to 20 A (depending on the relay type),
- height from 10,5 to 26 mm (depending on the relay type), high electric strength of the insulation,
- possibility of mounting on PCB, SMT and in plug-in sockets.
This type of relay is of high quality and reliability.
RM84 and RM85 relays are the basis for the interface relays of PI84 and PI85 types which are described
in the section of „Interface relays”.
The relays are recognized and certified by:
They meet the requirements of RoHS Directive.
RM40
miniature relays
• Very small dimensions
• High switching capacity up to 5 A or 8 A
• Cover with enhanced sealing protects the relay in course
of soldering and cleaning
• Applications: for household equipment, office machines, control
devices, alarm systems, in industrial control, industrial controllers
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
DC
DC
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
General data
1 CO
1 CO: AgNi, AgNi/Au 3 µm
1 CO: 250 V / 380 V
5 V AgNi, 1 V AgNi/Au 3 µm
1 CO: 5 A / 250 V AC
1 CO: 5 A / 30 V DC
10 mA AgNi, 1 mA AgNi/Au 3 µm
1 CO: 5 A
1 CO: 1 250 VA
50 mW AgNi, 1 mW AgNi/Au 3 µm
 100 m
1 NO
1 NO:
1 NO:
AgSnO2
250 V / 440 V
5 V AgSnO2
1 NO: 8 A / 250 V AC
1 NO: 8 A / 30 V DC
10 mA AgSnO2
1 NO: 8 A
1 NO: 2 000 VA
50 mW AgSnO2
3 ... 48 V
DC:  0,05 Un
see Table 1
0,20 W
4 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 5 mm
 5 mm
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
360 cycles/hour
• resistive DC1
1 800 cycles/hour
Mechanical life
18 000 cycles/hour
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
8 ms / 4 ms
> 105
1 CO: 5 A, 250 V AC
> 105
1 CO: 5 A, 30 V DC
> 107
20 x 10 x 10,5 mm
6g
-40...+85 oC
IP 64
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
max. 235 oC
max. 3,5 s
1 NO: 8 A, 250 V AC
1 NO: 8 A, 30 V DC
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
33
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM40
miniature relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
45
± 10%
2,25
4,5
1005
5
125
± 10%
3,75
7,5
1006
6
180
± 10%
4,50
9,0
1009
9
405
± 10%
6,75
13,5
1012
12
720
± 10%
9,00
18,0
1024
24
2 880
± 10%
18,00
36,0
1048
48
11 520
± 10%
36,00
72,0
Connection diagrams (pin side view)
Dimensions
1 CO
1 NO
Temperature rise [°C]
ure
rat
mpe
+25
°C
m te
Roo
Fig. 2
Release time
Release time [ms]
Fig. 1
Coil temperature rise max.
min.
Coil voltage supply [%Un]
Coil temperature increment over the ambient
temperature +25 °C, depended on coil voltage supply.
Coil voltage supply [%Un]
Dependance of the release time on coil voltage supply
34
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM40
miniature relays
Pinout (solder side view)
Mounting
1 CO
Relays RM40 are designed for direct
PCB mounting.
1 NO
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Contact material
20 - AgNi (1 CO)
22 - AgNi/Au 3 µm (1 CO)
30 - AgSnO2 (1 NO)
see Table 1 page 34
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Examples of ordering code:
RM40-2011-85-1003
RM40-3021-85-1024
relay RM40, for PCB, one changeover contact, contact material AgNi, for PCB, coil
voltage 3 V DC, in cover IP 64
relay RM40, for PCB, one normally open contact, contact material AgSnO2, coil voltage
24 V DC, in cover IP 64
35
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM50
miniature relays
• Small dimensions
• Switching current up to 10 A / 15 A
• The plastics applied provide for the operation of the relays
at high temperature and in chemical environment
• Sealed, for soldering
• Applications: for household equipment, office machines,
audio equipment, coffee machines, control devices, etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
DC
DC
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
General data
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
1 200 cycles/hour
• resistive AC1
1 200 cycles/hour
• resistive DC1
1 200 cycles/hour
Mechanical life
18 000 cycles/hour
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
1 CO, 1 NO
AgSnO2
240 V / 277 V
5V
10 A / 240 V AC
15 A / 24 V DC
15 mA
12 A
3 000 VA
0,75 W
 100 m
3 ... 48 V
DC:  0,05 Un
see Table 1
0,36 W 3 ... 24 V 1 000 V AC
500 V AC
0,45 W 48 V
type of insulation: basic
type of clearance: micro-disconnection
 1,9 mm
 1,9 mm
10 ms / 5 ms
> 105
7 A, 250 V AC
> 3 x 104 12 A, 250 V AC
> 5 x 104 15 A, 24 V DC
> 107
19 x 15,4 x 15,5 mm
11 g
-30...+55 oC
IP 64
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
max. 235 oC
max. 3,5 s
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
36
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM50
miniature relays
Coil data - DC voltage version
Coil code
Table 1
Rated voltage
V DC
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
25
± 10%
2,25
3,9
1005
5
70
± 10%
3,75
6,5
1006
6
100
± 10%
4,50
7,8
1009
9
225
± 10%
6,75
11,7
1012
12
400
± 10%
9,00
15,6
1018
18
900
± 10%
13,50
23,4
1024
24
1 600
± 10%
18,00
31,2
1048
48
6 400
± 10%
38,40
62,4
Connection diagrams (pin side view)
Dimensions
1 CO
1 NO
Fig. 1
Fig. 2
Operating / release time
Time [ms]
Temperature rise [°C]
Coil temperature rise Coil power [W]
A - operating time
B - release time
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Coil power [W]
37
www.relpol.com.pl
RM50
miniature relays
Fig. 3
Electrical life
Pinout (solder side view)
Number of cycles [ x 104 ]
1 CO
1 NO
Current of load [A]
1 - resistive load 120 V AC / 24 V DC
Mounting
Relays RM50 are designed for direct PCB mounting.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Contact material
30 - AgSnO2
see Table 1 page 37
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Example of ordering code:
RM50-3011-85-1012
relay RM50, for PCB, one changeover contact, contact material AgSnO2, coil voltage
12 V DC, in cover IP 64
38
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM699B
miniature relays
Version (V)
Version (H)
•Cover width only 5,0 mm
• Sealed for soldering and cleaning
• Terminals arrangement: vertical version (V)
and horizontal version (H)
• Applications: for PLC’s, industrial machinery, time relays,
counters, temperature adjusters, measurement instruments,
office equipment, etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC1
DC1
AC1
AC1
DC
DC
1 CO
AgSnO2
400 V AC / 250 V DC
10 V
6 A / 250 V AC 6 A / 24 V DC; 0,15 A / 250 V DC
100 mA 10 A 20 ms
6 A
1 500 VA
1 W
 100 m 100 mA, 24 V 360 cycles/hour
72 000 cycles/hour
5 ... 60 V
DC:  0,05 Un
see Table 1
0,17 W 5 ... 24 V 0,217 W 48, 60 V
Insulation rated voltage
Overvoltage category
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
250 V AC
III
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
8 ms / 4 ms
General data
AgSnO2/Au 3 µm ❶
30 V AC / 36 V DC ❶
5V
0,05 A / 30 V AC ❶
0,05 A / 36 V DC ❶
10 mA
0,1 A 20 ms ❶
0,05 A ❶
1,2 VA ❶
0,05 W
 30 m 10 mA, 5 V
4 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 6 mm
 8 mm
the NO and NC contact loaded (bilateral load):
the NO contact loaded:
> 3 x 104
see Fig. 1
6 A, 250 V AC
> 107
28 x 5 x 15 mm
6g
-40...+85 oC
-40...+85 oC
IP 64
PN-EN 60529
RTIII
PN-EN 116000-3
5g
5 g 10...55 Hz
max. 260 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶For gold-plated contacts - when the maximum values given have been exceeded, the gold layer is destroyed. Then, the advantages of gold-plating
disappear and the values are as for AgSnO2 contacts (see beside), and electrical life of these contacts may be shorter than of normal contacts.
39
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM699B
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1005
5
147
± 10%
3,75
7,5
1012
12
848
± 10%
9,0
18,0
1024
24
3 390
± 15%
18,0
36,0
1048
48
10 600
± 15%
36,0
72,0
1060
60
20 500
± 15%
45,0
90,0
Dimensions
vertical version (V)
horizontal version (H)
Connection diagrams (pin side view)
vertical version (V)
horizontal version (H)
1 CO
1 CO
40
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM699B
miniature relays
Fig. 1
Max. DC resistive load breaking capacity
Fig. 2
DC current [A]
Number of cycles
N
Electrical life at AC resistive current. Switching frequency: 360 cycles/hour
For simultaneous load
of NO and NC contact
DC voltage [V]
Switching current [A]
Coil operating range - DC Fig. 3
Description of Fig. 3
U / Un
A - relations between make voltage and ambient temperature at
no load on contacts. Coil temperature and ambient temperature
are equal before coil energizing. Make voltage is not higher than
the value read on Y axis (multiplication of rated voltage).
B - relations between make voltage and ambient temperature
after initial coil heating up with 1,1 Un, at continues load of In on
contacts. Make voltage is not higher than the value read on Y
axis (multiplication of rated voltage).
1, 2 - values on Y axis represent allowed overvoltage on coil
at certain ambient temperature and contact load:
1 - no load
2 - rated load
Ambient temperature [°C]
PI6W-1P
Mounting
Relays RM699B vertical version (V) are designed for:
• direct PCB mounting • sockets PI6W-1P, 35 mm rail
mount acc. to PN-EN 60715 (see page 207).
Plug-in sockets
for relays
RM699BV
or RSR30
Relays RM699B horizontal version (H) are designed for
direct PCB mounting.
41
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM699B
miniature relays
Pinout (solder side view)
vertical version (V)
horizontal version (H)
1 CO
1 CO
Ordering codes
Cover protection
category
Type
Terminals
arrangement
R M 6 9 9 B
—
Contact
material
Number and type
of contacts
Connection
mode
—
Coil code
—
Terminals arrangement
V - vertical version
H - horizontal version
see Table 1 page 40
Contact material
30 - AgSnO2
32 - AgSnO2/Au 3 µm
Number and type of contacts
11 - 1 CO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB and sockets
Examples of ordering code:
RM699BV-3011-85-1012 RM699BH-3211-85-1005
relay RM699B, vertical version, for PCB and sockets, one changeover contact, contact
material AgSnO2, coil voltage 12 V DC, in cover IP 64
Relais RM699B, horizontal version, for PCB, one changeover contact, contact material
AgSnO2/Au 3 µm, coil voltage 5 V DC, in cover IP 64
42
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM84
miniature relays
RM84
RM84-...-01 ❶
•Cadmium - free contacts • Height 15,7 mm
•5000 V / 10 mm reinforced insulation
•For PCB and plug-in sockets
•Accessories: sockets and modules • AC and DC coils
•Available special versions: with transparent cover ❶;
with the increased dielectric strength of the contact clearance ❷
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO, 2 NO ❷
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
8 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
550 W (single-phase motor)
8 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
15 A AgSnO2
8A
2 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
3 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and
contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
5 000 V AC
type of insulation: reinforced
1 000 V AC
type of clearance: micro-disconnection
2 000 V AC
contacts 2 NO, type of clearance: full-disconnection ❷
2 500 V AC
type of insulation: basic
 10 mm
 10 mm
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
(NO/NC)
Solder bath temperature / Soldering time
7 ms / 3 ms
General data
> 105
8 A, 250 V AC
see Fig. 2
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 12,7 x 15,7 mm / 14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 40 ❶ or IP 67 PN-EN 60529
RTII ❶ or RTIII PN-EN 116000-3
20 g
10 g / 5 g 10...150 Hz
max. 270 oC / max. 5 s
-40...+70 oC ❶
The data in bold type pertain to the standard versions of the relays.
❶For special version - relays in transparent cover: only available with IP 40 and RTII, operating temperature -40...+70 °C - see ”Ordering codes”
❷For special version with contacts 2 NO: relays with increased contact gap, dielectric strength 2000 V AC - see ”Ordering codes”
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
43
RM84
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Coil operating range
V DC
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Coil operating range
V AC 50 Hz
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Connection diagrams (pin side view)
2 CO
Terminal (pin)
[mm]
2 NO
A1(1); A2(2)
22(3); 21(4); 24(5);
12(6); 11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
44
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM84
miniature relays
AC1
N - electrical life
at AC1
DC1
In = 8 A
45
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM84
miniature relays
Pinout (solder side view)
Mounting
Relays RM84 ❸ are designed for: • direct PCB mounting • screw terminals plug-in sockets GZT80 ❹ and GZM80 ❹ with clip GZT80-0040 or
GZM80-0041; plug-in sockets GZS80 ❹ with clip GZS-0040 or GZM80-0041,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one
M3 screw • spring terminals plug-in sockets GZMB80 ❺  with clip
GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715.
Signalling / protecting modules type M... are available with sockets (see
page 261) • plug-in sockets for PCB mounting EC 50 with clip MP16-2,
MH16-2; plug-in sockets PW80 with clip MH16-2; plug-insockets GD50
with clip MP16-2, GD-0016, MH16-2.
2 CO
2 NO
❸ For special version - relays in transparent cover: the distance of min. 5 mm between the
mounting relays.
❹ Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­­­con­nection strip type ZGGZ80
(see page 262).
❺For sockets GZMB80 - see page 247 (wire connection).
Ordering codes
Cover protection
category
Type
Contact
material
R M 8 4 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Cover
—
Contact material
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
see Tables 1, 2 page 44
Number and type of contacts
12 - 2 CO
22 - 2 NO
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version, without signs recognitions) ❶
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Special version
without marks - basic version,
dielectric strength of contact clearance 1000 V AC
(51) - contacts 2 NO, increased contact gap
- dielectric strength 2000 V AC ❷
Connection mode
5 - for PCB and sockets
Examples of ordering code:
RM84-3012-25-5024
RM84-2012-25-1012-01 RM84-2322-35-1024 (51)
relay RM84, for PCB and sockets, two changeover contacts,contact material AgSnO2,
coil voltage 24 V AC 50/60 Hz, in standard cover (no transparent, gray colour) IP 40
relay RM84, for PCB and sockets, two changeover contacts, contact material AgNi, coil
voltage 12 V DC in transparent cover (special version, without signs recognitions) IP 40
relay RM84, special version with increased contact gap, for PCB and sockets, two
normally open contacts, contact material AgNi/Au 5 µm, coil voltage 24 V DC, in
standard cover (no transparent, gray colour) IP 67
46
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Special
version
RM84 SMT
miniature relays
•Cadmium - free contacts
•Height 17,7 mm
•5000 V / 10 mm reinforced insulation
•For surface mounting SMT - for manual soldering
•AC and DC coils
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO, 2 NO
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
8 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
550 W (single-phase motor)
8 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
15 A AgSnO2
8A
2 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
3 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
(NO/NC)
Solder bath temperature
Soldering time
7 ms / 3 ms
General data
5 000 V AC
1 000 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: basic
 10 mm
 10 mm
> 105
8 A, 250 V AC
see Fig. 2
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 13,2 x 17,7 mm
14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
20 g
10 g / 5 g 10...150 Hz
max. 270 oC
max. 5 s
47
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM84 SMT
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
Dimensions
2 CO
2 NO
48
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM84 SMT
miniature relays
AC1
N - electrical life
at AC1
DC1
In = 8 A
49
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM84 SMT
miniature relays
Connection diagrams (pin side view)
Soldering areas (solder side view)
2 CO
2 NO
2 CO
Terminal (pin)
[mm]
2 NO
A1(1); A2(2)
22(3); 21(4); 24(5);
12(6); 11(7); 14(8)
Ø 0,6
0,5 x 0,9
Mounting
Relays RM84 SMT are designed for surface mounting SMT - for manual soldering.
Ordering codes
Cover protection
category
Type
Contact
material
R M 8 4 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Contact material
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
see Tables 1, 2 page 48
Number and type of contacts
12 - 2 CO
22 - 2NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
M - for surface mounting SMT
Examples of ordering code:
RM84-2012-2M-1024
RM84-2322-2M-5012
relay RM84 SMT, for surface mounting SMT, two changeover contacts, contact material
AgNi, coil voltage 24 V DC, in cover IP 40
relay RM84 SMT, for surface mounting SMT, two normally open contacts, contact material
AgNi/Au 5 µm, coil voltage 12 V AC 50/60 Hz, in cover IP 40
50
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RMB841
miniature relays, bistable with one coil
RMB841
RMB841-...-01 ❷
• Bistable with one coil ❶ • Cadmium - free contacts
• Height 15,7 mm • 5000 V / 10 mm reinforced insulation
• For PCB and plug-in sockets • Accessories: sockets • DC coils
•Available special version: with transparent cover ❷
• Applications: battery-powered devices;
other devices where the minimum power consumption is critical
•Compliance with standards: PN-EN 60335-1, PN-EN 61810-1, UL508
•Recognitions, certifications, directives: RoHS
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
DC1
AC1
AC1
Coil data
2 NO
AgNi
250 V / 400 V
250 V
5V
8 A / 250 V AC
8 A / 24 V DC
5 mA
15 A
8A
2 000 VA
0,3 W
 100 m
600 cycles/hour
72 000 cycles/hour
Rated voltage
DC
Minimum voltages of
• pick-up / reset position
Supply voltage pulse duration time
Rated power consumption
DC
3 ... 24 V
0,7 Un / 0,55 Un
min. 15 ms / max. 1 min.
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
• for contact state
Vibration resistance
• for contact state
Solder bath temperature
Soldering time
3 ms / 2 ms
Insulation according to PN-EN 60664-1
General data
5 000 V AC
1 000 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: basic
 10 mm
 10 mm
3 x 104 8 A, 250 V AC
105 0,15 A, 220 V DC
2 x 106
29 x 12,7 x 15,7 mm
14 g
-40...+85 oC
-20...+85 oC
-20...+70 oC ❷
IP 40 ❷ or IP 67 PN-EN 60529
RTII ❷ or RTIII
PN-EN 116000-3
11 g / 18 g open / closed contact
10 g / 5 g open / closed contact
10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ Relays must be energizing only in pulse mode. Min. time of pulse duration 15 ms.
❷For special version - relays in transparent cover: only available with IP 40 and RTII, operating temperature -40...+70 °C - see ”Ordering codes” 
51
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RMB841
miniature relays, bistable with one coil
Table 1
Coil data - DC voltage version
Rated voltage
V DC
Coil code
Coil resistance
at 20 °C

Acceptable
resistance
Minimum pick-up
voltage
V DC (at 20 °C)
Reset ❸
- minimum voltage
V DC (at 20 °C)
1003
3
10
± 10%
2,1
1,7
1005
5
28
± 10%
3,5
2,8
3,3
1006
6
40
± 10%
4,2
1012
12
160
± 10%
8,4
6,6
1024
24
640
± 10%
16,8
13,2
The data in bold type pertain to the standard versions of the relays.
❸Minimum voltage value required to reset the relay - open the contact.
Connection diagrams (pin side view)
Dimensions
2 NO
Terminal (pin)
[mm]
A1(1); A2(2)
21(4); 24(5);
11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
Contact position not defined at delivery.
The polarization shown in the figures is required
for on-position of the contacts.
Pinout (solder side view)
2 NO
Mounting
Relays RMB841 ❹ are designed for: • direct PCB mounting • screw termi­
nals plug-in sockets GZT80 ❺ and GZM80 ❺ with clip GZT80-0040 or
GZM80-0041; plug-in sockets GZS80 ❺ with clip GZS-0040 or GZM80-0041,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3
screw • spring terminals plug-in sockets GZMB80 ❻with clip GZMB80-0040
or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 • plug-in sockets
for PCB mounting EC 50 with clip MP16-2, MH16-2; plug-in sockets PW80
with clip MH16-2; plug-insockets GD50 with clip MP16-2, GD-0016, MH16-2.
❹ For special version - relays in transparent cover: the distance of min. 5 mm between the
mounting relays.
❺ Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­­­con­nection strip type ZGGZ80
(see page 262).
❻For sockets GZMB80 - see page 247 (wire connection).
52
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RMB841
miniature relays, bistable with one coil
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
R M B 8 4 1 —
Connection
mode
—
Coil code
Cover
—
—
Contact material
20 - AgNi
Number and type of contacts
see Table 1 page 52
22 - 2 NO
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version, without signs recognitions) ❷
Examples of ordering code:
RMB841-2022-35-1012
RMB841-2022-25-1024-01 relay RMB841, for PCB and sockets, two normally open contacts, contact material AgNi,
coil voltage 12 V DC, in standard cover (no transparent, gray colour) IP 67
relay RMB841, for PCB and sockets, two normally open contacts, contact material AgNi,
coil voltage 24 V DC, in transparent cover (special version, without signs recognitions)
IP 40
GZMB80
Spring terminals
plug-in socket
for RM84, RM85...,
RMB841, RMB851,
RM87L, RM87P
- see page 247.
53
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85
miniature relays
RM85
RM85-...-01 ❶
•Cadmium - free contacts • Height 15,7 mm
•5000 V / 10 mm reinforced insulation
•For PCB and plug-in sockets
•Accessories: sockets and modules • AC and DC coils
•Available special versions: with transparent cover ❶;
with the increased dielectric strength of the contact clearance ❷
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
3 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and
contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
5 000 V AC
type of insulation: reinforced
1 000 V AC
type of clearance: micro-disconnection
2 000 V AC
contact 1 NO, type of clearance: full-disconnection ❷
 10 mm
 10 mm
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
7 ms / 3 ms
General data
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature / Soldering time
54
1 CO, 1 NO ❷
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
30 A AgSnO2
16 A
4 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
> 0,7 x 105
16 A, 250 V AC
> 104 20 A, 250 V AC, 85 °C (RM85-3021-25-1...)
see Fig. 2
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 12,7 x 15,7 mm / 14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC -40...+70 oC ❶
IP 40 ❶ or IP 67 PN-EN 60529
RTII ❶ or RTIII PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC / max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶For special version - relays in transparent cover: only available with IP 40 and RTII, operating temperature -40...+70 °C - see ”Ordering codes”
❷For special version with contact 1 NO: relays with increased contact gap, dielectric strength 2000 V AC - see ”Ordering codes”
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Coil operating range
V DC
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Coil operating range
V AC 50 Hz
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Connection diagrams (pin side view)
1 CO
Terminal (pin)
[mm]
1 NO
A1(1); A2(2)
22(3); 21(4); 24(5);
12(6); 11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
RM85 terminals are doubled for each contact.
Both terminals are to be used while connecting to load.
55
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85
miniature relays
AC1
N - electrical life
at AC1
DC1
In = 16 A
56
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85
miniature relays
Pinout (solder side view)
Mounting
Relays RM85 ❸ are designed for: • direct PCB mounting • screw terminals plug-in sockets GZT80 ❹ ❺ and GZM80 ❹ ❺ with clip GZT80-0040
or GZM80-0041; plug-in sockets GZS80 ❹ ❺ with clip GZS-0040 or
GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with one M3 screw • spring terminals plug-in sockets GZMB80 ❹ ❻with
clip GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715.
Signalling / protecting modules type M... are available with sockets (see
page 261) • plug-in sockets for PCB mounting EC 50 with clip MP16-2,
MH16-2; plug-in sockets PW80 with clip MH16-2; plug-in sockets GD50
with clip MP16-2, GD-0016, MH16-2.
1 CO
1 NO
❸ For special version - relays in transparent cover: the distance of min. 5 mm between the
mounting relays.
❹ Loads above 12 A (GZT80, GZM80) or 10 A (GZS80, GZMB80) require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 167, 175 (PI85 - connection).
❺Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­con­nection strip type ZGGZ80
(see page 262).
❻For sockets GZMB80 - see page 247 (wire connection).
Ordering codes
Cover protection
category
Type
Contact
material
R M 8 5 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Cover
Special
version
—
Contact material
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
see Tables 1, 2 page 55
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version, without signs recognitions) ❶
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Special version
without marks - basic version,
dielectric strength of contact clearance 1000 V AC
(51) - contact 1 NO, increased contact gap
- dielectric strength 2000 V AC ❷
Examples of ordering code:
RM85-3011-25-5024
RM85-2011-25-1012-01 RM85-2321-35-1024 (51)
relay RM85, for PCB and sockets, one changeover contact, contact material AgSnO2,
coil voltage 24 V AC 50/60 Hz, in standard cover (no transparent, gray colour) IP 40
relay RM85, for PCB and sockets, one changeover contact, contact material AgNi, coil
voltage 12 V DC, in transparent cover (special version, without signs recognitions) IP 40
relay RM85, special version with increased contact gap, for PCB and sockets, one normally open contact, contact material AgNi/Au 5 µm, coil voltage 24 V DC, in standard
cover (no transparent, gray colour) IP 67
57
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85
for switching higher voltages
miniature relays
•Switching voltage 480 V AC
•Cadmium - free contacts
•Height 15,7 mm
•5000 V / 10 mm reinforced insulation
•For PCB
•DC coils
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
DC
DC
1 NO
AgSnO2
250 V / 480 V
10 V
5 A / 480 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC
0,22 A / 120 V 0,1 A / 250 V (R300)
10 mA
30 A
16 A / 250 V AC
2 400 VA
1W
 100 m
100 mA, 24 V
360 cycles/hour
3 600 cycles/hour
3 ... 110 V
 0,1 Un
see Table 1
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
480 V AC
4 000 V 1,2 / 50 µs
III
2
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
Mechanical life
3 600 cycles/hour
Electromagnetic load according to UL 508
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
7 ms / 3 ms
General data
5 000 V AC
1 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 4 x 104 5 A, 480 V AC
> 3 x 107
Heavy Pilot Duty 480 V AC, 15 A make / 1,5 A break
29 x 12,7 x 15,7 mm
14 g
-40...+85 oC
-40...+85 oC
IP 40 or IP 67 PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
58
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85
for switching higher voltages
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Connection diagram (pin side view)
Dimensions
1 NO
Terminal (pin)
[mm]
Drilling hole:
• for relays
A1(1); A2(2)
21(4); 24(5);
11(7); 14(8)
Ø 0,6
0,5 x 0,9
Ø 1,3 + 0,1 mm
RM85 for switching higher voltages terminals are
doubled for each contact. Both terminals are to be used
while connecting to load.
Pinout (solder side view)
Mounting
1 NO
Relays RM85 for switching higher voltages are designed for direct PCB mounting.
59
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85
for switching higher voltages
miniature relays
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Table 1 page 59
Contact material
30 - AgSnO2
Number and type of contacts
51 - 1 NO, increased contact gap
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB
Example of ordering code:
RM85-3051-35-1012
relay RM85, with increased contact gap, for PCB, one normally open contact, contact
material AgSnO2, coil voltage 12 V DC, in cover IP 67
60
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 inrush
miniature relays
•Cadmium - free contacts • Height 15,7 mm • Resistance to inrush
current 80 A (20 ms) • 5000 V / 10 mm reinforced insulation
•For PCB and plug-in sockets
•DC coils • Accessories: sockets and modules
•Applications: for motor operation control, lighting, electromagnetic
valves, and many other applications
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
DC
DC
1 NO
AgSnO2
250 V / 440 V
10 V
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 2)
0,22 A / 120 V 0,1 A / 250 V (R300)
10 mA
80 A 20 ms
16 A
4 000 VA
1W
 100 m
600 cycles/hour
72 000 cycles/hour
3 ... 110 V
DC:  0,1 Un
see Table 1 and Fig. 3
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
600 cycles/hour
• cos
• resistive DC1
600 cycles/hour
• inductive AC3, I = 3,5 A
• at incandescent lamp load, 1000 W
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
8 ms / 3 ms
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 105 16 A, 250 V AC
see Fig. 1
> 105 16 A, 24 V DC
> 2,5 x 105
> 0,9 x 105
> 3 x 107
29 x 12,7 x 15,7 mm
14 g
-40...+85 oC
-40...+85 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
61
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 inrush
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Connection diagram (pin side view)
1 NO
Terminal (pin)
[mm]
A1(1); A2(2)
21(4); 24(5);
11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
RM85 inrush terminals are doubled for each contact.
Both terminals are to be used while connecting to load.
62
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 inrush
miniature relays
DC1
N - electrical life
at AC1
63
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 inrush
miniature relays
Pinout (solder side view)
Mounting
Relays RM85 inrush are designed for: • direct PCB mounting • screw
ter­minals plug-in sockets GZT80 ❶ ❷ and GZM80 ❶ ❷ with clip GZT80-0040
or GZM80-0041; plug-in sockets GZS80 ❶ ❷ with clip GZS-0040 or
GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with one M3 screw • spring terminals plug-in sockets GZMB80 ❶ ❸with
clip GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715.
Signalling / protecting modules type M... are available with sockets (see
page 261) • plug-in sockets for PCB mounting EC 50 with clip MP16-2,
MH16-2; plug-in sockets PW80 with clip MH16-2; plug-in sockets GD50
with clip MP16-2, GD-0016, MH16-2.
1 NO
❶ Loads above 12 A (GZT80, GZM80) or 10 A (GZS80, GZMB80) require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 167, 175 (PI85 - connection).
❷Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­con­nection strip type ZGGZ80
(see page 262).
❸For sockets GZMB80 - see page 247 (wire connection).
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Table 1 page 62
Contact material
50 - AgSnO2 - solid contacts
Number and type of contacts
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
5 - for PCB and sockets
Example of ordering code:
RM85-5021-25-1012
relay RM85 inrush, for PCB and sockets, one normally open contact, contact material
AgSnO2 - solid contacts, coil voltage 12 V DC, in cover IP 40
64
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 105 oC sensitive
miniature relays
105
o
•For PCB and plug-in sockets
•Accessories: sockets and modules
•DC coils - sensitive
•Ambient temperature up to 105 °C
•Applications: in household equipment, in temperature controlers
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
C
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
DC
DC
1 NO
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 2)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
30 A AgSnO2
16 A
4 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
5 ... 48 V
DC:  0,1 Un
see Table 1 and Fig. 3
0,25 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
(number of cycles)
8 ms / 3 ms
> 105 16 A, 230 V AC, 70 °C
> 2 x 104 16 A, 230 V AC, 105 °C
> 1,7 x 105
10 A, 230 V AC, 105 °C
> 2,8 x 105
8 A, 230 V AC, 105 °C
> 3,2 x 105
6 A, 230 V AC, 105 °C
see Fig. 1
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 12,7 x 15,7 mm
14 g
-40...+105 oC
-40...+105 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
General data
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
65
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 105 oC sensitive
miniature relays
Coil data - DC voltage version, sensitive version
Coil code
Rated voltage
V DC
Coil resistance
at 20 °C

Table 1
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S005
5
102
± 10%
3,75
15,0
S006
6
144
± 10%
4,50
18,0
S009
9
330
± 10%
6,75
27,0
S010
10
380
± 10%
7,50
30,0
S012
12
580
± 10%
9,00
36,0
S018
18
1 300
± 10%
13,50
54,0
S024
24
2 300
± 10%
18,00
72,0
S048
48
9 340
± 10%
36,00
144,0
Dimensions
Connection diagram (pin side view)
1 NO
Terminal (pin)
[mm]
A1(1); A2(2)
21(4); 24(5);
11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
RM85 105 oC sensitive terminals are doubled
for each contact. Both terminals are to be used
while connecting to load.
66
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 105 oC sensitive
miniature relays
DC1
N - electrical life
at AC1
67
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 105 oC sensitive
miniature relays
Pinout (solder side view)
Mounting
Relays RM85 105 oC sensitive are designed for: • direct PCB mounting • screw
ter­minals plug-in sockets GZT80 ❶ ❷ and GZM80 ❶ ❷ with clip GZT80-0040
or GZM80-0041; plug-in sockets GZS80 ❶ ❷ with clip GZS-0040 or
GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with one M3 screw • spring terminals plug-in sockets GZMB80 ❶ ❸with
clip GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715.
Signalling / protecting modules type M... are available with sockets (see
page 261) • plug-in sockets for PCB mounting EC 50 with clip MP16-2,
MH16-2; plug-in sockets PW80 with clip MH16-2; plug-in sockets GD50
with clip MP16-2, GD-0016, MH16-2.
1 NO
❶ Loads above 12 A (GZT80, GZM80) or 10 A (GZS80, GZMB80) require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 167, 175 (PI85 - connection).
❷Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­con­nection strip type ZGGZ80
(see page 262).
❸For sockets GZMB80 - see page 247 (wire connection).
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Contact material
Coil code
see Table 1 page 66
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
Number and type of contacts
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
5 - for PCB and sockets
Examples of ordering code:
RM85-3021-25-S012 RM85-2321-25-S005 relay RM85 105 oC sensitive, for PCB and sockets, one normally open contact, contact
material AgSnO2, sensitive coil voltage 12 V DC, in cover IP 40
relay RM85 105 oC sensitive, for PCB and sockets, one normally open contact, contact
material AgNi/Au 5 µm, sensitive coil voltage 5 V DC, in cover IP 40
68
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 SMT
miniature relays
•Cadmium - free contacts
•Height 17,7 mm
•5000 V / 10 mm reinforced insulation
•For surface mounting SMT - for manual soldering
•AC and DC coils
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
1 CO, 1 NO
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
30 A AgSnO2
16 A
4 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
3 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
7 ms / 3 ms
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 0,7 x 105
16 A, 250 V AC
see Fig. 2
> 105 0,15 A, 220 V DC
> 3 x 107
29 x 13,2 x 17,7 mm
14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
69
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 SMT
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
Dimensions
1 CO
1 NO
70
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 SMT
miniature relays
AC1
N - electrical life
at AC1
DC1
In = 16 A
71
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM85 SMT
miniature relays
Connection diagrams (pin side view)
Soldering areas (solder side view)
1 CO
1 NO
1 CO
Terminal (pin)
[mm]
1 NO
A1(1); A2(2)
22(3); 21(4); 24(5);
12(6); 11(7); 14(8)
Ø 0,6
0,5 x 0,9
RM85 SMT terminals are doubled for each contact.
Both terminals are to be used while connecting to load.
Mounting
Relays RM85 SMT are designed for surface mounting SMT - for manual soldering.
Ordering codes
Cover protection
category
Type
Contact
material
R M 8 5 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Contact material
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
see Tables 1, 2 page 70
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
M - for surface mounting SMT
Examples of ordering code:
RM85-2011-2M-1024
RM85-2321-2M-5012
relay RM85 SMT, for surface mounting SMT, one changeover contact, contact material
AgNi, coil voltage 24 V DC, in cover IP 40
relay RM85 SMT, for surface mounting SMT, one normally open contact, contact material
AgNi/Au 5 µm, coil voltage 12 V AC 50/60 Hz, in cover IP 40
72
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 faston
miniature relays
version (V)
version (H)
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
•Cadmium - free contacts • Height 15,7 mm • 5000 V / 10 mm reinforced
insulation • Coil terminals for PCB, contacts terminals for PCB and flat
insert connectors - faston 250 (6,3 x 0,8 mm), faston arrangement:
vertical version (V) and horizontal version (H) • DC coils - sensitive
•Ambient temperature up to 105 °C • Applications: for control of operation
of heating elements and motors of household equipment and catering
industry devices, for control of electromagnetic valves, in many other
applications • Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
DC
Insulation according to PN-EN 60664-1
DC
1 NO
AgSnO2
250 V / 440 V
10 V
20 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
20 A / 24 V DC
0,22 A / 120 V 0,1 A / 250 V (R300)
10 mA
30 A
20 A
5 000 VA
1W
 100 m 100 mA, 24 V
600 cycles/hour
72 000 cycles/hour
5 ... 48 V
DC:  0,1 Un
see Table 1
0,25 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
8 ms / 3 ms
5 000 V AC
1 000 V AC
type of clearance: micro-disconnection
 10 mm
 10 mm
General data
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
type of insulation: reinforced
> 2 x 104 > 1,5 x 105 see Fig. 1
> 3 x 107
20 A, 250 V AC, 85 °C
10 A, 250 V AC, 105 °C
vertical version (V): 40,5 x 12,7 x 15,7 mm
x 12,7 x 15,7 mm
horizontal version (H): 44,5
• storage
• operating
16 g
-40...+105 oC
-40...+105 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
73
www.relpol.com.pl
RM85 faston
miniature relays
Coil data - DC voltage version, sensitive version
Coil code
Rated voltage
V DC
Coil resistance
at 20 °C

Table 1
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S005
5
102
± 10%
3,75
15,0
S006
6
144
± 10%
4,50
18,0
S009
9
330
± 10%
6,75
27,0
S010
10
380
± 10%
7,50
30,0
S012
12
580
± 10%
9,00
36,0
S018
18
1 300
± 10%
13,50
54,0
S024
24
2 300
± 10%
18,00
72,0
S048
48
9 340
± 10%
36,00
144,0
The data in bold type pertain to the standard versions of the relays.
vertical version (V)
horizontal version (H)
1 NO
N - electrical life
at AC1
74
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM85 faston
miniature relays
Pinout (solder side view)
Mounting
Relays RM85 faston are designed for: • direct PCB
mounting • connection of load with flat insert connectors
- faston 250 (6,3 x 0,8 mm).
vertical version (V)
1 NO
horizontal version (H)
1 NO
Ordering codes
Cover protection
category
Type
Faston arranTerminals raster
gement
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Faston arrangement
V - vertical version
H - horizontal version
see Table 1 page 74
Terminals raster
7 - 7,5 mm raster
Contact material
30 - AgSnO2
Number and type of contacts
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
0 - coil terminals for PCB,
contacts terminals for PCB and flat insert connectors - faston 250 (6,3 x 0,8 mm)
Example of ordering code:
RM85V7-3021-20-S012 relay RM85 faston, vertical version, coil terminals for PCB, contacts terminals for PCB and
flat insert connectors - faston 250 (6,3 x 0,8 mm), 7,5 mm terminals raster, one normally
open contact, contact material AgSnO2, sensitive coil voltage 12 V DC, in cover IP 40
75
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RMB851
miniature relays, bistable with one coil
RMB851-...-01 ❷
RMB851
• Bistable with one coil ❶ • Cadmium - free contacts
• Height 15,7 mm • 5000 V / 10 mm reinforced insulation
• For PCB and plug-in sockets • Accessories: sockets • DC coils
•Available special version: with transparent cover ❷
• Applications: battery-powered devices;
other devices where the minimum power consumption is critical
•Compliance with standards: PN-EN 60335-1, PN-EN 61810-1, UL508
•Recognitions, certifications, directives: RoHS
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
DC1
AC1
AC1
Coil data
1 NO
AgNi
250 V / 400 V
250 V
5V
16 A / 250 V AC
16 A / 24 V DC
5 mA
30 A
16 A
4 000 VA
0,3 W
 100 m
600 cycles/hour
72 000 cycles/hour
Rated voltage
DC
Minimum voltages of
• pick-up / reset position
Supply voltage pulse duration time
Rated power consumption
DC
3 ... 24 V
0,7 Un / 0,55 Un
min. 15 ms / max. 1 min.
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
• for contact state
Vibration resistance
• for contact state
Solder bath temperature
Soldering time
3 ms / 2 ms
Insulation according to PN-EN 60664-1
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
3 x 104 16 A, 250 V AC
105 0,15 A, 220 V DC
5 x 106
29 x 12,7 x 15,7 mm
14 g
-40...+85 oC
-20...+85 oC
-20...+70 oC ❷
IP 40 ❷ or IP 67 PN-EN 60529
RTII ❷ or RTIII
PN-EN 116000-3
11 g / 18 g open / closed contact
10 g / 5 g open / closed contact
10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ Relays must be energizing only in pulse mode. Min. time of pulse duration 15 ms.
❷For special version - relays in transparent cover: only available with IP 40 and RTII, operating temperature -40...+70 °C - see ”Ordering codes” 
76
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RMB851
miniature relays, bistable with one coil
Table 1
Coil data - DC voltage version
Rated voltage
V DC
Coil code
Coil resistance
at 20 °C

Acceptable
resistance
Minimum pick-up
voltage
V DC (at 20 °C)
Reset ❸
- minimum voltage
V DC (at 20 °C)
1003
3
10
± 10%
2,1
1,7
1005
5
28
± 10%
3,5
2,8
3,3
1006
6
40
± 10%
4,2
1012
12
160
± 10%
8,4
6,6
1024
24
640
± 10%
16,8
13,2
The data in bold type pertain to the standard versions of the relays.
❸Minimum voltage value required to reset the relay - open the contact.
Connection diagrams (pin side view)
Dimensions
1 NO
Terminal (pin)
[mm]
A1(1); A2(2)
21(4); 24(5);
11(7); 14(8)
Ø 0,6
0,5 x 0,9
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
Contact position not defined at delivery.
The polarization shown in the figures is required
for on-position of the contacts.
RMB851 terminals are doubled for each contact.
Both terminals are to be used while connecting to load.
Pinout (solder side view)
1 NO
Mounting
Relays RMB851 ❹ are designed for: • direct PCB mounting • screw termi­­
nals plug-in sockets GZT80 ❺ ❻ and GZM80 ❺ ❻ with clip GZT80-0040
or GZM80-0041; plug-in sockets GZS80 ❺ ❻ with clip GZS-0040 or
GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with one M3 screw • spring terminals plug-in sockets GZMB80 ❺ ❼with
clip GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715
• plug-in sockets for PCB mounting EC 50 with clip MP16-2, MH16-2; plug-in
sockets PW80 with clip MH16-2; plug-in sockets GD50 with clip MP16-2,
GD-0016, MH16-2.
❹ For special version - relays in transparent cover: the distance of min. 5 mm between the
mounting relays.
❺ Loads above 12 A (GZT80, GZM80) or 10 A (GZS80, GZMB80) require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 167, 175 (PI85 - connection).
❻Plug-in sockets GZT80, GZM80, GZS80 may be linked with inter­­con­nection strip type ZGGZ80
(see page 262).
❼For sockets GZMB80 - see page 247 (wire connection).
77
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RMB851
miniature relays, bistable with one coil
Ordering codes
Cover protection
category
Type
Contact
material
R M B 8 5 1 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Cover
—
Contact material
20 - AgNi
Number and type of contacts
see Table 1 page 77
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version, without signs recognitions) ❷
Examples of ordering code:
RMB851-2021-35-1012
RMB851-2021-25-1024-01 relay RMB851, for PCB and sockets, one normally open contact, contact material AgNi,
coil voltage 12 V DC, in standard cover (no transparent, gray colour) IP 67
relay RMB851, for PCB and sockets, one normally open contact, contact material AgNi,
coil voltage 24 V DC, in transparent cover (special version, without signs recognitions)
IP 40
GZMB80
Spring terminals
plug-in socket
for RM84, RM85...,
RMB841, RMB851,
RM87L, RM87P
- see page 247.
78
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM87, RM87 sensitive
miniature relays
RM87N-...-01 ❶
RM87N sensitive
•Cadmium - free contacts • Height 15,7 mm
•5000 V / 10 mm reinforced insulation • For PCB and plug-in sockets
•Accessories: sockets and modules • AC and DC coils - standard
(RM87), DC coils - sensitive (RM87 sensitive)
•Available special versions: with transparent cover ❶;
with the increased dielectric strength of the contact clearance ❷
•Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
RM87 standard version
RM87 sensitive version
1 CO, 1 NO ❷
1 NO
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
12 A / 250 V AC 10 A / 250 V AC
3 A / 120 V 1,5 A / 240 V (B300)
750 W (single-phase motor)
12 A / 24 V DC (see Fig. 3)
10 A / 24 V DC (see Fig. 4)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
25 A AgSnO2 20 A AgSnO2
12 A 10 A
3 000 VA 2 500 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
–
3 ... 110 V
5 ... 48 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 3 and Fig. 5, 7 see Table 2 and Fig. 6
0,75 VA –
0,4 ... 0,48 W
0,25 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and
contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
5 000 V AC
type of insulation: reinforced
1 000 V AC
type of clearance: micro-disconnection
2 000 V AC
contact 1 NO, type of clearance: full-disconnection ❷
 10 mm
 10 mm
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature / Soldering time
7 ms / 3 ms
General data
> 105 12 A, 250 V AC
> 1,7 x 105 10 A, 250 V AC
see Fig. 2
> 105 0,15 A, 220 V DC
> 3 x 107
29 x 12,7 x 15,7 mm / 14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC -40...+70 oC ❶
IP 40 ❶ or IP 67 PN-EN 60529
RTII ❶ or RTIII PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC / max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For special version (only for RM87 - standard version) - relays in transparent cover: only available with IP 40 and RTII, operating temperature
-40...+70 °C - see ”Ordering codes” ❷For special version with contact 1 NO (only for RM87 - standard version): relays with increased contact gap,
dielectric strength 2000 V AC - see ”Ordering codes”
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
79
RM87, RM87 sensitive
miniature relays
Coil data - DC voltage version, RM87 - standard version
Coil code
Rated voltage
V DC
Coil resistance
at 20 °C

Table 1
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, RM87 sensitive - sensitive version
Coil code
Rated voltage
V DC
Coil resistance
at 20 °C

Acceptable
resistance
Table 2
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S005
5
102
± 10%
3,75
15,0
S006
6
144
± 10%
4,50
18,0
S009
9
330
± 10%
6,75
27,0
S010
10
400
± 10%
7,50
30,0
S012
12
580
± 10%
9,00
36,0
S018
18
1 300
± 10%
13,50
54,0
S024
24
2 300
± 10%
18,00
72,0
S048
48
9 340
± 10%
36,00
144,0
Coil data - AC 50/60 Hz voltage version, RM87 - standard version
Coil code
Rated voltage
V AC
Coil resistance
at 20 °C

Acceptable
resistance
Table 3
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
The data in bold type pertain to the standard versions of the relays.
80
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM87, RM87 sensitive
miniature relays
RM87N - 1 CO (standard version)
RM87L - 1 CO (standard version)
RM87P - 1 CO (standard version)
RM87N, RM87N sensitive - 1 NO
RM87L, RM87L sensitive - 1 NO
RM87P, RM87P sensitive - 1 NO
RM87N
1 CO
RM87N,
RM87N sensitive
1 NO
RM87L
1 CO
RM87L,
RM87L sensitive
1 NO
RM87P
1 CO
RM87P,
RM87P sensitive
1 NO
81
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM87, RM87 sensitive
miniature relays
AC1
N - electrical life
at AC1
DC1
GZMB80
Spring terminals
plug-in socket
for RM84, RM85...,
RMB841, RMB851,
RM87L, RM87P
- see page 247.
82
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
DC1
RM87, RM87 sensitive
miniature relays
In = 12 A
Pinout (solder side view)
RM87N - 1 CO (standard version)
RM87L - 1 CO (standard version)
RM87P - 1 CO (standard version)
RM87N, RM87N sensitive - 1 NO
RM87L, RM87L sensitive - 1 NO
RM87P, RM87P sensitive - 1 NO
83
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM87, RM87 sensitive
miniature relays
Mounting
Relays RM87N ❸, RM87N sensitive are designed for: • direct PCB mounting • screw terminals plug-in sockets
GZT92 ❹ and GZM92 ❹ with clip GZT80-0040 or GZM80-0041; plug-in sockets GZS92 ❹ with clip GZS-0040 or
GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw. Signalling / pro­tecting
modules type M... are available with sockets (see page 261) • plug-in sockets for PCB mounting EC 35 with clip
MP16-2, MH16-2; plug-in sockets GD35 with clip MP16-2, GD-0016, MH16-2.
Relays RM87L ❸, RM87L sensitive, RM87P ❸, RM87P sensitive are designed for: • direct PCB mounting • screw
terminals plug-in sockets GZT80 ❹ and GZM80 ❹ with clip GZT80-0040 or GZM80-0041; plug-in sockets GZS80 ❹
with clip GZS-0040 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw
• spring terminals plug-in sockets GZMB80 ❹ ❺with clip GZMB80-0040 or GZM80-0041, 35 mm rail mount acc. to
PN-EN 60715. Signalling / protecting modules type M... are available with sockets (see page 261) • plug-in sockets
for PCB mounting EC 50 with clip MP16-2, MH16-2; plug-in sockets PW80 with clip MH16-2; plug-in sockets GD50
with clip MP16-2, GD-0016, MH16-2.
❸For special version (only for RM87 - standard version) - relays in transparent cover: the distance of min. 5 mm between the mounting relays.
❹Plug-in sockets GZT92, GZM92, GZS92 and GZT80, GZM80, GZS80 may be linked with inter­­­­con­nection strip type ZGGZ80 (see page 262).
❺For sockets GZMB80 - see page 247 (wire connection).
Ordering codes
Cover protection
category
Type
Type of raster
R M 8 7
—
Contact
material
Number and type
of contacts
Connection
mode
—
Coil code
—
Cover
Special
version
—
Type of raster
N - 3,5 mm raster
L - 5,0 mm left raster
P - 5,0 mm right raster
see Tables 1, 2, 3 page 80
Contact material
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version, without signs recognitions) ❶
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Special version
without marks - basic version,
dielectric strength of contact clearance 1000 V AC
(51) - contact 1 NO, increased contact gap
- dielectric strength 2000 V AC ❷
Connection mode
5 - for PCB and sockets
Examples of ordering code:
RM87N-2011-25-1012-01 relay RM87N, 3,5 mm raster, for PCB and sockets, one changeover contact, contact
material AgNi, coil voltage 12 V DC, in transparent cover (special version, without signs
recognitions) IP 40
RM87N-2021-35-1024 (51) relay RM87N, special version with increased contact gap, 3,5 mm raster, for PCB
and sockets, one normally open contact, contact material AgNi, coil voltage 24 V DC,
in standard cover (no trans­parent, gray colour) IP 67
RM87P-3021-25-S012
relay RM87P sensitive, 5 mm right raster, for PCB and sockets, one normally open
contact, contact material AgSnO2, sensitive coil voltage 12 V DC, in standard cover
(no transparent, gray colour) IP 40
84
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM87N SMT
miniature relays
•Cadmium - free contacts
• Height 17,7 mm
•5000 V / 10 mm reinforced insulation
•For surface mounting SMT - for manual soldering
•AC and DC coils
• Compliance with standard PN-EN 60335-1
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
1 CO, 1 NO
AgNi, AgNi/Au 5 µm, AgSnO2
250 V / 440 V
5 V AgNi, 5 V AgNi/Au 5 µm, 10 V AgSnO2
12 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
12 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA AgNi, 2 mA AgNi/Au 5 µm, 10 mA AgSnO2
25 A AgSnO2
12 A
3 000 VA
0,3 W AgNi, 0,05 W AgNi/Au 5 µm, 1 W AgSnO2
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 240 V
3 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
7 ms / 3 ms
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 105
12 A, 250 V AC
see Fig. 2
> 105
0,15 A, 220 V DC
> 3 x 107
29 x 13,2 x 17,7 mm
14 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 40
PN-EN 60529
RTII
PN-EN 116000-3
30 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
85
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM87N SMT
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1003
3
22
± 10%
2,1
7,6
1005
5
60
± 10%
3,5
12,7
1006
6
90
± 10%
4,2
15,3
1009
9
200
± 10%
6,3
22,9
1012
12
360
± 10%
8,4
30,6
1018
18
710
± 10%
12,6
45,9
1024
24
1 440
± 10%
16,8
61,2
1036
36
3 140
± 10%
25,2
91,8
1048
48
5 700
± 10%
33,6
122,4
1060
60
7 500
± 10%
42,0
153,0
1110
110
25 200
± 10%
77,0
280,0
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
5012
12
100
± 10%
9,6
13,2
5024
24
400
± 10%
19,2
28,8
5048
48
1 550
± 10%
38,4
57,6
5060
60
2 600
± 10%
48,0
72,0
5110
110
8 900
± 10%
88,0
132,0
5115
115
9 600
± 10%
92,0
138,0
5120
120
10 200
± 10%
96,0
144,0
5220
220
35 500
± 10%
176,0
264,0
5230
230
38 500
± 10%
184,0
276,0
5240
240
42 500
± 15%
192,0
288,0
Dimensions
RM87N 1 CO
RM87N 1 NO
86
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM87N SMT
miniature relays
AC1
N - electrical life
at AC1
DC1
In = 12 A
87
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM87N SMT
miniature relays
Connection diagrams (pin side view)
Soldering areas (solder side view)
RM87N 1 CO
RM87N 1 NO
RM87N 1 CO
Terminal (pin)
RM87N 1 NO
A1(1); A2(2)
12(3); 11(4);
14(5)
Ø 0,6
0,5 x 0,9
[mm]
Mounting
Relays RM87N SMT are designed for surface mounting SMT - for manual soldering.
Ordering codes
Cover protection
category
Type
Type of raster
R M 8 7 N —
Contact
material
Number and type
of contacts
Connection
mode
—
Coil code
—
Type of raster
N - 3,5 mm raster
Contact material
see Tables 1, 2 page 86
20 - AgNi
23 - AgNi/Au 5 µm
30 - AgSnO2
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
M - for surface mounting SMT
Examples of ordering code:
RM87N-2011-2M-1024
RM87N-2321-2M-5012
88
www.relpol.com.pl
relay RM87N SMT, 3,5 mm raster, for surface mounting SMT, one changeover contact,
contact material AgNi, coil voltage 24 V DC, in cover IP 40
relay RM87N SMT, 3,5 mm raster, for surface mounting SMT, one normally open contact,
contact material AgNi/Au 5 µm, coil voltage 12 V AC 50/60 Hz, in cover IP 40
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM96
miniature relays
• Height 16,2 mm • IP 40 and IP 67
• For PCB (1 CO, 1 NO, 1 NC) and plug-in sockets (1 CO)
• Accessories: sockets and modules for 1 CO
• DC coils
• Recyclable packing
• Terminals: 3,2 mm for version 1 CO,
5,0 mm for version 1 NO and 1 NC
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
DC
Insulation according to PN-EN 60664-1
DC
1 CO, 1 NO, 1 NC
AgSnO2, AgSnO2/Au 3 µm, AgCdO
250 V / 440 V
10 V AgSnO2, 5 V AgSnO2/Au 3 µm, 10 V AgCdO
8 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor; 0,5 HP / 250 V AC UL 508)
8 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
10 mA AgSnO2, 2 mA AgSnO2/Au 3 µm, 5 mA AgCdO
15 A
8A
2 000 VA
1 W AgSnO2, 0,05 W AgSnO2/Au 3 µm, 0,5 W AgCdO
 100 m
600 cycles/hour
72 000 cycles/hour
5 ... 48 V
DC:  0,1 Un
see Table 1and Fig. 4
0,22...0,3 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
Mechanical life (cycles)
Motor load according to UL 508
Dimensions (L x W x H)
10 ms / 5 ms
4 000 V AC
1 000 V AC
type of clearance: micro-disconnection
 8 mm
 8 mm
General data
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
type of insulation: reinforced
• storage
• operating
> 105
8 A, 250 V AC
see Fig. 2
> 2 x 107
0,25 HP 120 V AC, single-phase motor
1 CO: 30 x 10 x 16,2 mm
1 NO, 1 NC:28 x 10 x 16,2 mm
11 g
-40...+85 oC
-40...+80 oC
IP 40 or IP 67 PN-EN 60529
RTII
PN-EN 116000-3
20 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
89
www.relpol.com.pl
RM96
miniature relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1005
5
110
± 10%
3,5
12,0
1006
6
160
± 10%
4,2
14,5
1009
9
360
± 10%
6,3
22,0
1012
12
660
± 10%
8,4
29,5
1018
18
1 500
± 10%
12,6
44,0
1024
24
2 200
± 10%
16,8
54,0
1048
48
8 000
± 10%
33,6
102,0
The data in bold type pertain to the standard versions of the relays.
Connection diagrams (pin side view)
Dimensions
1 CO
1 NO, 1 NC
1 CO
Terminal (pin)
[mm]
Drilling hole:
• for relays
1 NO
1 NC
A1(1); A2(2)
12(3); 11(4);
14(5)
0,6 x 0,9
0,6 x 0,1
Ø 1,3 + 0,1 mm
Pinout (solder side view)
1 CO
1 NO
90
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
1 NC
RM96
miniature relays
Fig. 1
Fig. 2
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive current. Un = 230 V AC - version 1NO
Power factor
N - electrical life
at AC1
Switching current [A]
Max. breaking capacity
A - resistive load DC1
B - resistive load AC1
Fig. 4
Coil operating range - DC Current [A]
U / Un
Fig. 3
Voltage [V]
Ambient temperature [°C]
Description of Fig. 4
A - relations between make voltage and ambient temperature at
no load on contacts. Coil temperature and ambient temperature
are equal before coil energizing. Make voltage is not higher than
the value read on Y axis (multiplication of rated voltage).
B - relations between make voltage and ambient temperature
after initial coil heating up with 1,1 Un, at continues load of In on
contacts. Make voltage is not higher than the value read on Y
axis (multiplication of rated voltage).
1, 2 - values on Y axis represent allowed overvoltage on coil
at certain ambient temperature and contact load:
1 - no load
2 - rated load
ES 32
Screw terminals
plug-in socket
for RM96 1 CO
- see page 249.
91
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM96
miniature relays
Mounting
Relays RM96 1 CO (one changeover contact) are designed for: • direct PCB mounting • screw terminals plug-in
sockets ES 32 ❶ with clip MS 16 or GZM80-0041, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with
one M3 screw. Signalling / protecting modules type M... are available with sockets (see page 261).
Relays RM96 1 NO (one normally open contact) and RM96 1 NC (one normally closed contact) are designed for direct
PCB mounting.
❶ Plug-in sockets ES 32 may be linked with inter­­­­con­nection strip type ZGGZ80.
Oznaczenia kodowe do zamówień
Cover protection
category
Type
Contact
material
R M 9 6 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Contact material
10 - AgCdO
30 - AgSnO2
32 - AgSnO2/Au 3 µm
see Table 1 page 90
Number and type of contacts
11 - 1 CO
21 - 1 NO
31 - 1 NC
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB (1 CO, 1 NO, 1 NC) and sockets (1 CO)
Examples of ordering codes:
RM96-1011-35-1012
RM96-3021-25-1024
relay RM96, for PCB and sockets, one changeover contact, contact material AgCdO, coil
voltage 12 V DC, in cover IP 67
relay RM96, for PCB, one normally open contact, contact material AgSnO2, coil voltage
24 V DC, in cover IP 40
Print on relay cover
Type marking on relays cover RM96 do not match the ordering codes (examples of marking for RM96-1011-35-1012 ❷
and RM96-3021-25-1024 ❸).
Number and type of contacts
P - 1 CO
Z - 1 NO
R - 1 NC
Coil
Contact material ❷
without marks
- AgCdO
Contact material ❸
AgSnO2
- AgSnO2
92
5 - 5 V DC
... - ...
48 - 48 V DC
Cover protection category
without marks - IP 40
W - IP 67
AgSnO2+Au
- AgSnO2/Au 3 µm
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM83
miniature relays
RM83
RM83-...-01 ❶
•Miniature dimensions • General purpose relays
• Version 1 NO AgSnO2 - for special loads:
resistance to inrush current 120 A (20 ms)
• Protection category IP 40 or IP 67
• For PCB and plug-in sockets
• DC coils - standard and sensitive
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
DC
DC
Insulation according to PN-EN 60664-1
1 CO, 1 NO, 1 NC
AgSnO2, AgCdO, AgCdO/Au 0,2 µm
250 V / 440 V
10 V AgSnO2, 10 V AgCdO, 10 V AgCdO/Au 0,2 µm
16 A / 250 V AC
6 A / 120 V
3 A / 240 V (A300)
550 W (single-phase motor)
16 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
10 mA AgSnO2, 5 mA AgCdO, 5 mA AgCdO/Au 0,2 µm
30 A 1 NO, AgSnO2
16 A
4 000 VA
1 W AgSnO2, 0,5 W AgCdO, 0,5 W AgCdO/Au 0,2 µm
 100 m
600 cycles/hour
72 000 cycles/hour
5 ... 110 V standard version 110 V sensitive version
DC:  0,1 Un
see Table 1
0,6 W
5 ... 60 V standard version
0,6 W 110 V sensitive version
0,9 W 110 V standard version
Insulation rated voltage
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• at incandescent lamp load
• at halogen lamp load
• cos
• L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
7 ms / 3 ms
General data
4 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 8 mm
 8 mm
> 105 16 A, 250 V AC
> 105 1000 W, 230 V AC > 3 x 104 3000 W, 230 V AC > 104 2500 W, 230 V AC see Fig. 2
> 105 0,12 A, 220 V DC
> 3 x 107
IP 40: 29,2 x 13,1 x 25,1 mm
IP 67: 29,2 x 13,1 x 25,6 mm
18 g
-40...+85 oC
-40...+70 oC
IP 40 or IP 67 PN-EN 60529
20 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
1 NO, AgSnO2
1 NO, AgSnO2
1 NO, AgSnO2
The data in bold type pertain to the standard versions of the relays.
❶ For special version - relays in transparent cover - see ”Ordering codes”.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
93
www.relpol.com.pl
RM83
miniature relays
Coil data - DC voltage version, standard
Rated voltage
V DC
Coil code
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1005
5
49
± 10%
3,5
8,9
1006
6
68
± 10%
4,2
10,6
1009
9
110
± 10%
6,3
15,9
1012
12
260
± 10%
8,4
21,2
1018
18
550
± 10%
12,6
31,8
1024
24
1 100
± 10%
16,8
42,5
1036
36
2 100
± 10%
25,2
63,7
1048
48
4 400
± 10%
33,6
85,0
1060
60
7 000
± 10%
42,0
106,2
1110
110
13 000
± 10%
77,0
140,0
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, sensitive
Table 2
Coil code
Rated voltage
V DC
Coil resistance
at 20 °C

Acceptable
resistance
S110
110
20 500
± 10%
Coil operating range
V DC
min. (at 20 °C)
77,0
max. (at 20 °C)
188,0
Dimensions
version IP 40
version IP 67
Connection diagrams (pin side view)
Terminal (pin)
[mm]
A1(1);
A2(2)
21(4);
11(7)
22 (3); 24 (5);
12 (6); 14 (8)
0,4 x 1,1
0,2 x 1,1
0,4 x 1,1
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
RM83 terminals are doubled for each contact.
Both terminals are to be used while connecting to load.
1 CO
1 NO
1 NC
94
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM83
miniature relays
AC1
N - electrical life
at AC1
Mounting
DC1
Relays RM83 are designed for: • direct PCB mounting
• plug-in sockets for PCB mounting EC 50 with clip
MP25-2, MH25-2, GD-0025, RM81-0001; plug-in sockets
PW80 with clip MH25-2, GD-0025, RM81-0001; plug-in
sockets GD50 with clip MP25-2, GD-0025, MH25-2,
RM81-0001.
95
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM83
miniature relays
Pinout (solder side view)
1 CO
1 NO
1 NC
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
R M 8 3 —
Connection
mode
—
Coil code
—
Cover
—
Contact material
10 - AgCdO
11 - AgCdO/Au 0,2 µm
30 - AgSnO2
see Table 1 page 94
Number and type of contacts
11 - 1 CO
21 - 1 NO
31 - 1 NC
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Cover
without marks - standard cover (no transparent, gray colour)
01 - transparent cover (special version) ❶
Examples of ordering code:
RM83-3011-25-1024 relay RM83, for PCB and sockets, one changeover contact, contact material AgSnO2,
coil voltage 24 V DC, in standard cover (no transparent, gray colour) IP 40
RM83-3011-25-S110 relay RM83, for PCB and sockets, one changeover contact, contact material AgSnO2,
sensitive coil voltage 110 V DC, in standard cover (no transparent, gray colour) IP 40
RM83-3021-35-1012-01 relay RM83, for PCB and sockets, one normally open contact, contact material
AgSnO2, coil voltage 12 V DC, in transparent cover (special version) IP 67
96
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM92
miniature relays
RM92
RM92-...-01 ❶
•Miniature dimensions
•General purpose relays
•Protection category IP 40 or IP 67
• For PCB and plug-in sockets
•DC coils - standard and sensitive
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
DC1
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
DC
1 CO, 1 NO, 1 NC
AgCu/Au 0,2 µm, AgCdO, AgCdO/Au 3 µm
250 V / 440 V
10 V AgCu/Au 0,2 µm, 10 V AgCdO, 5 V AgCdO/Au 3 µm
8 A / 250 V AC
8 A / 24 V DC
5 mA AgCu/Au 0,2 µm, 5 mA AgCdO, 2 mA AgCdO/Au 3 µm
8A
2 000 VA
0,5 W AgCu/Au 0,2 µm, 0,5 W AgCdO, 0,05 W AgCdO/Au 3 µm
 100 m
600 cycles/hour
72 000 cycles/hour
6 ... 80 V standard version
0,1 Un
see Tables 1, 2
0,8 W standard version
0,5 W sensitive version
DC
Insulation according to PN-EN 60664-1
Insulation rated voltage
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
400 V AC
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
Mechanical life (cycles)
Motor load according to UL 508
Dimensions (L x W x H)
6 ms / 2 ms
4 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 8 mm
 8 mm
General data
Weight
Ambient temperature
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
5 ... 60 V sensitive version
DC: 
• storage
• operating
> 2 x 105 8 A, 250 V AC
see Fig. 1
> 3 x 107
0,25 HP 120 V AC, single-phase motor
IP 40: 28 x 11,5 x 26 mm
IP 67: 28 x 11,5 x 26,5 mm
17 g
-40...+85 oC
-40...+70 oC
IP 40 or IP 67 PN-EN 60529
20 g
10 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For special version - relays in transparent cover - see ”Ordering codes”.
97
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM92
miniature relays
Coil data - DC voltage version, standard
Rated voltage
V DC
Coil code
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1006
6
58
± 10%
4,0
9,4
1012
12
170
± 10%
7,4
16,2
1024
24
740
± 10%
15,4
33,6
1036
36
1 600
± 10%
23,5
50,0
1048
48
3 200
± 10%
31,0
70,0
1060
60
5 000
± 10%
38,0
87,0
1080
80
10 000
± 10%
55,0
125,0
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, sensitive
Rated voltage
V DC
Coil code
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S005
5
47
± 10%
3,2
8,5
S006
6
80
± 10%
4,2
11,0
S012
12
330
± 10%
8,3
22,5
S024
24
1 200
± 10%
16,8
43,0
S036
36
2 700
± 10%
25,0
64,0
S048
48
4 700
± 10%
32,8
85,0
S060
60
7 200
± 10%
42,0
105,0
Connection diagrams (pin side view)
Dimensions
1 CO
1 NO
1 NC
Terminal (pin)
A1(1);
A2(2)
11(4)
12(3); 14(5)
[mm]
Ø 0,6
0,2 x 1
0,4 x 1
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
* - dimensions of version IP 67
Mounting
Relays RM92 are designed for: • direct PCB mounting • plug-in sockets for PCB mounting EC 35 with clip MP25-2,
MH25-2, GD-0025, RM81-0001; plug-in sockets GD35 with clip MP25-2, GD-0025, MH25-2, RM81-0001.
98
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM92
miniature relays
N - electrical life
at AC1
Pinout (solder side view)
1 CO
1 NO
1 NC
99
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM92
miniature relays
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
R M 9 2 —
Connection
mode
—
Coil code
—
Cover
—
Contact material
10 - AgCdO
12 - AgCdO/Au 3 µm
41 - AgCu/Au 0,2 µm
see Tables 1, 2 page 98
Number and type of contacts
11 - 1 CO
21 - 1 NO
31 - 1 NC
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Cover
without marks - standard cover (no transparent, black colour)
01 - transparent cover (special version) ❶
Examples of ordering codes:
RM92-4111-25-1024 RM92-4121-35-S024 RM92-4131-35-1012-01 relay RM92, for PCB and sockets, one changeover contact, contact material
AgCu/Au 0,2 µm, coil voltage 24 V DC, in standard cover (no transparent, black
colour) IP 40
relay RM92, for PCB and sockets, one normally open contact, contact material
AgCu/Au 0,2 µm, sensitive coil voltage 24 V DC, in standard cover (no transparent,
black colour) IP 67
relay RM92, for PCB and sockets, one normally closed contact, contact material
AgCu/Au 0,2 µm, coil voltage 12 V DC, in transparent cover (special version) IP 67
Print on relay cover
Type marking on relays cover RM92 do not match the ordering codes (example of marking for RM92-1011-35-S024).
Number and type of contacts
P - 1 CO
Z - 1 NO
R - 1 NC
Coil version
without marks - standard
S - sensitive
Coil
Cover protection category
5 - 5 V DC
... - ...
80 - 80 V DC
without marks - IP 40
W - IP 67
Contact material
without marks - AgCdO
AgCdO3Au - AgCdO/Au 3 µm
AgCu0.2Au - AgCu/Au 0,2 µm
100
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM94
miniature relays
RM94
RM94-...-01 ❶
•Miniature dimensions
•General purpose relays
•Protection category IP 40 or IP 67
•For PCB and plug-in sockets
• DC coils - standard and sensitive
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
DC1
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
DC
DC
Insulation according to PN-EN 60664-1
2 CO, 2 NO, 2 NC
AgCu/Au 0,2 µm, AgCdO, AgCdO/Au 3 µm
250 V / 440 V
10 V AgCu/Au 0,2 µm, 10 V AgCdO, 5 V AgCdO/Au 3 µm
8 A / 250 V AC
8 A / 24 V DC
5 mA AgCu/Au 0,2 µm, 5 mA AgCdO, 2 mA AgCdO/Au 3 µm
8A
2 000 VA
0,5 W AgCu/Au 0,2 µm, 0,5 W AgCdO, 0,05 W AgCdO/Au 3 µm
 100 m
600 cycles/hour
72 000 cycles/hour
6 ... 110 V standard version
DC:  0,1 Un
see Tables 1, 2
0,8 W standard version
0,5 W sensitive version
Insulation rated voltage
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
Operating / release time (typical values)
Electrical life (number of cycles)
• resistive AC1
• cos
Mechanical life (cycles)
Motor load according to UL 508
Dimensions (L x W x H)
7 ms / 2 ms
4 000 V AC
1 000 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: basic
 8 mm
 8 mm
General data
Weight
Ambient temperature
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
5 ... 110 V sensitive version
• storage
• operating
(2 NO/2 NC)
> 2 x 105 8 A, 250 V AC
see Fig. 1
> 3 x 107
0,125 HP 120 V AC, single-phase motor
IP 40: 28 x 12,5 x 26 mm
IP 67: 28 x 12,5 x 26,5 mm
20 g
-40...+85 oC
-40...+70 oC
IP 40 or IP 67 PN-EN 60529
20 g
10 g / 5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For special version - relays in transparent cover - see ”Ordering codes”.
101
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM94
miniature relays
Coil data - DC voltage version, standard
Rated voltage
V DC
Coil code
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1006
6
47
± 10%
3,9
8,5
1012
12
170
± 10%
7,9
16,2
1024
24
740
± 10%
16,8
33,6
1036
36
1 350
± 10%
22,0
45,5
1048
48
3 200
± 10%
34,0
70,0
1060
60
5 000
± 10%
42,0
87,0
1096
96
10 000
± 10%
61,0
125,0
1110
110
13 000
± 10%
77,0
140,0
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, sensitive
Rated voltage
V DC
Coil code
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
S005
5
47
± 10%
3,5
8,5
S006
6
70
± 10%
4,4
10,3
S012
12
270
± 10%
8,8
20,3
S024
24
1 100
± 10%
17,5
41,0
S036
36
2 000
± 10%
24,0
55,0
S048
48
4 400
± 10%
35,0
82,0
S060
60
6 500
± 10%
44,0
100,0
S110
110
20 000
± 10%
88,0
188,0
The data in bold type pertain to the standard versions of the relays.
Connection diagrams (pin side view)
Dimensions
2 CO
2 NO
2 NC
Terminal (pin)
A1(1);
A2(2)
21(4); 11(7)
22(3); 24(5);
12(6); 14(8)
[mm]
Ø 0,6
0,2 x 1
0,35 x 1
Drilling hole:
• for relays
Ø 1,3 + 0,1 mm
• for sockets Ø 1,5 + 0,1 mm
* - dimensions of version IP 67
Mounting
Relays RM94 are designed for: • direct PCB mounting • plug-in sockets for PCB mounting EC 50 with clip MP25-2,
MH25-2, GD-0025, RM81-0001; plug-in sockets PW80 with clip MH25-2, GD-0025, RM81-0001; plug-in sockets GD50
with clip MP25-2, GD-0025, MH25-2, RM81-0001.
102
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RM94
miniature relays
N - electrical life
at AC1
Pinout (solder side view)
2 CO
2 NO
2 NC
103
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RM94
miniature relays
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
R M 9 4 —
Connection
mode
—
Coil code
—
Cover
—
Contact material
10 - AgCdO
12 - AgCdO/Au 3 µm
41 - AgCu/Au 0,2 µm
see Tables 1, 2 page 102
Number and type of contacts
12 - 2 CO
22 - 2 NO
32 - 2 NC
Cover protection category
2 - in cover, IP 40 version
3 - in cover, IP 67 waterproof version
Connection mode
5 - for PCB and sockets
Cover
without marks - standard cover (no transparent, black colour)
01 - transparent cover (special version) ❶
Examples of ordering codes:
RM94-4112-25-1024 RM94-4122-35-S024 RM94-4132-35-1012-01 relay RM94, for PCB and sockets, two changeover contacts, contact material
AgCu/Au 0,2 µm, coil voltage 24 V DC, in standard cover (no transparent, black
colour) IP 40
relay RM94, for PCB and sockets, two normally open contacts, contact material
AgCu/Au 0,2 µm, sensitive coil voltage 24 V DC, in standard cover (no transparent,
black colour) IP 67
relay RM94, for PCB and sockets, two normally closed contacts, contact material
AgCu/Au 0,2 µm, coil voltage 12 V DC, in transparent cover (special version) IP 67
Print on relay cover
Type marking on relays cover RM94 do not match the ordering codes (example of marking for RM94-1012-35-S024).
Number and type of contacts
P - 2 CO
Z - 2 NO
R - 2 NC
Coil version
without marks - standard
S - sensitive
Coil
Cover protection category
5 - 5 V DC
... - ...
110 - 110 V DC
without marks - IP 40
W - IP 67
Contact material
without marks - AgCdO
AgCdO3Au - AgCdO/Au 3 µm
AgCu0.2Au - AgCu/Au 0,2 µm
104
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RA2
automotive relays
• Cadmium - free contacts • Miniature dimensions
• Automotive applications
• High resistance to inrush current
• For PCB
• Following relays versions are available:
RA2 - standard design
RAW2- narrow pin layout design
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Min. switching current
Max. inrush current
DC
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• at motor load
• at incandescent lamp load
• no load
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Must operate voltage
Rated power consumption
DC
1 CO, 1 NO, 2 NO
AgSnO2
60 V / 60 V
1V
10 mA
1 CO: 110 A / 50 A (NO/NC)
1 NO: 110 A
2 NO: 2 x 110 A
1 CO: 20 A / 12 A (NO/NC)
1 NO: 20 A
2 NO: 2 x 12,5 A
1 CO: 270 W / 162 W (NO/NC)
1 NO: 270 W
2 NO: 2 x 168 W
1W
 3 m
900 cycles/hour 450 cycles/hour 120 cycles/hour 36 000 cycles/hour
2 s ON / 6 s OFF
2 s ON / 30 s OFF
5 ... 48 V
0,15 Un
see Table 1
 0,6 Un
1,44 W
DC: 
DC
Insulation
Insulation rated voltage
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
60 V AC
Operating / release time (typical values)
Electrical life
• resistive DC1
10 ms / 3 ms
500 V AC
500 V AC
 1 mm
 1 mm
General data
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
Cover protection category
Solder bath temperature
Soldering time
2 s ON / 2 s OFF
• storage
• operating
> 105
20 A / 12 A (NO/NC), 13,5 V DC
1 NO: > 105
20 A, 13,5 V DC
2 NO: > 105
2 x 12,5 A, 13,5 V DC
> 107
IP 00: 18,6 x 13,0 x 18,5 mm
IP 40: 20,5 x 15,3 x 19,7 mm
12 g
-40...+100 oC
-40...+85 oC
IP 40 or IP 00 (without cover)
PN-EN 60529
max. 270 oC
max. 5 s
1 CO:
The data in bold type pertain to the standard versions of the relays.
105
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RA2
automotive relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1005
5
18
± 10%
4,0
1006
6
24
± 10%
4,8
6,6
8,0
1009
9
55
± 10%
7,2
12,0
1012
12
100
± 10%
9,6
16,0
1015
15
152
± 10%
12,0
20,0
1018
18
230
± 10%
14,4
23,9
1024
24
390
± 10%
19,2
31,9
1048
48
1 590
± 10%
38,4
63,8
The data in bold type pertain to the standard versions of the relays.
Connection diagrams (pin side view)
Relay terminals:
c, d, e, f - 0,6 x 1,4 mm
82
2 NO
81
1 CO right
83
1 CO left
85
1 CO right
+ 1 NO
89
1 CO left
+ 1 NO
Max. DC resistive load breaking capacity
DC voltage [V]
Dimensions
a - 0,6 x 1,0 mmb - 1,0 x 1,5 mm
% of DC current Ic max
106
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Fig. 1
RA2
automotive relays
Mounting
Relays RA2 are designed for direct PCB mounting.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Table 1 page 106
Contact material
30 - AgSnO2
Number and type of contacts
82 - 2 NO
81 - 1 CO right
83 - 1 CO left
85 - 1 CO right + 1 NO
89 - 1 CO left + 1 NO
Cover protection category
1 - without cover, IP 00 version
2 - in cover, IP 40 version
Connection mode
5 - for PCB
Examples of ordering codes:
RA2-3081-15-1012
RAW2-3082-25-1024 relay RA2, for PCB, one right changeover contact, contact material AgSnO2, coil voltage
12 V DC, without cover IP 00
relay RAW2 with narrow pin layout design, for PCB, two normally open contacts, contact
material AgSnO2, coil voltage 24 V DC, in cover IP 40
107
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
miniature industrial
109
R3................................... 114
R4................................... 118
RY2.................................. 123
R2M................................. 127
R2...................................
industrial of small dimensions
131
R15 - 4 CO ....................... 135
RUC................................. 139
RUC-M ............................. 144
R15 - 2 CO, 3 CO ...............
148
R20 ................................. 152
R30 ................................. 155
RS35, RS50 ..................... 158
RG25...............................
Industrial relays
Industrial relays are applied mainly in industrial and power automation systems, in signaling and protection
systems, in other control and electric drives systems.
The basic features of industrial relays are:
- contact number: from 1 to 4, rated contact switching currents up to 48 A (depending on the relay type),
- versions with coil overvoltage suppression,
- versions with flag indicators and manual relay test pushbuttons with the possibility of latching
the normally open contacts closed,
- mounting on PCB, plug-in sockets, 35 mm rails; screw and spring terminals of plug-in sockets,
and via flat connecting inserts.
The main products of Relpol S.A. have been successfully applied in industrial automation for many years. Their
reliability and quality have been acknowledged by numerous prizes and awards, and by the Customers’ satisfaction.
R2, R3 and R4 relays are the basis for the interface relays of PIR2, PIR3 and PIR4 types which are described
in the section of „Interface relays”.
The relays are recognized and certified by: AUCOTEAM GmbH Berlin,
They meet the requirements of RoHS Directive.
R2
miniature industrial relays
• Relays of general application • For plug-in sockets: 35 mm rail mount
acc. to PN-EN 60715; on panel mounting; PCB mounting • For PCB
and soldering connections - option • Miniature dimensions • Cadmium
- free contacts • AC and DC coils • WT (mechanical indicator + lock­
able front test button) - standard features of relays for plug-in sockets.
Relays may be provided with the test buttons (no latching) and plugs
- page 265 • Recognitions, certifications, directives: RoHS, AUCOTEAM
GmbH Berlin - railroad standard,
12 A / 250 V AC
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
DC
Insulation according to PN-EN 60664-1
AC
DC
2 CO
AgNi, AgNi/Au 0,2 µm
250 V / 440 V
10 V
12 A / 250 V AC ❶ 10 A / 250 V AC ❷
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor)
12 A / 24 V DC (see Fig. 3) ❶
10 A / 24 V DC ❷
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
24 A
12 A ❶
10 A ❷
3 000 VA ❶
2 500 VA ❷
0,3 W
 100 m
1 200 cycles/hour
18 000 cycles/hour
6 ... 240 V
5 ... 220 V
AC:  0,2 Un
DC:  0,1 Un
see Tables 1, 2
1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
AC: 10
2 500 V AC
1 500 V AC
2 500 V AC
type of clearance: micro-disconnection
type of insulation: basic
 2,5 mm
 4 mm
General data
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
type of insulation: basic
• storage
• operating
(NO/NC)
ms / 8 ms
DC: 13
ms / 3 ms
> 105
12 A, 250 V AC
see Fig. 2
> 2 x 107
27,5 x 21,2 x 35,6 mm ❶ 27,5 x 21,1 x 33,5 mm ❷
27,5 x 21,2 x 33 mm ❸
35 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 40
PN-EN 60529
RTI
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For plug-in sockets version: standard (WT) ❷ For PCB version ❸ For version with threaded bolt
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
109
R2
miniature industrial relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1005
5
28
± 10%
4,0
1006
6
40
± 10%
4,8
5,5
6,6
1012
12
160
± 10%
9,6
13,2
1024
24
640
± 10%
19,2
26,4
1048
48
2 600
± 10%
38,4
52,8
1060
60
4 000
± 10%
48,0
66,0
1080
80
7 100
± 10%
64,0
88,0
1110
110
13 600
± 10%
88,0
121,0
1125
125
16 000
± 10%
100,0
137,5
1220
220
54 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
5006
6
9,8
± 10%
5012
12
39,5
5024
24
158
5042
42
5048
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
4,8
6,6
± 10%
9,6
13,2
± 10%
19,2
26,4
470
± 10%
33,6
46,2
48
640
± 10%
38,4
52,8
5060
60
930
± 10%
48,0
66,0
5080
80
1 720
± 10%
64,0
88,0
5110
110
3 450
± 10%
88,0
121,0
5115
115
3 610
± 10%
92,0
127,0
5120
120
3 770
± 10%
96,0
132,0
5127
127
4 000
± 10%
101,6
139,0
5220
220
15 400
± 10%
176,0
242,0
5230
230
16 100
± 10%
184,0
253,0
5240
240
16 800
± 10%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
EUROPRODUCT 2002
for electromagnetic relays
R2...WT, R3...WT, R4...WT
with sockets GZT2, GZT3, GZT4
ELECTROPRODUCT 2003
for electromagnetic relays
R2, R3, R4
110
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R2
miniature industrial relays
Test buttons R4P-0001 and plugs R4W-0003 need
to ordered saparately. They substitute buttons type T.
To exchange by Customer themselves. Information
on test buttons (no latching) and plugs - page 265.
Mounting
Relays R2 are offered in versions: • standard WT
(mechanical indicator + lockable front test button), for
plug-in sockets. In standard version of relays (WT)
is possibility self-exchange of button type T for
test button R4P-0001 (no latching) or plug R4W-0003
(no manual operation). Test buttons (no latching) and
plugs need to ordered saparately • for PCB (without WT)
• with threaded bolt.
GZMB2
Spring terminals
plug-in socket for R2
- see page 250.
111
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R2
miniature industrial relays
AC1
2 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
DC1
N - electrical life
at AC1
Mounting
Relays R2 are designed for: • screw terminals plug-in sockets GZT2 ❶ and GZM2 ❶ with clip GZT4-0040 or G4 1052,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • spring terminals plug-in sockets
GZMB2 ❷with clip GZMB4-0040 or G4 1052, 35 mm rail mount acc. to PN-EN 60715. Signalling / protecting modules
type M... are available with sockets (see page 261) • plug-in sockets for PCB mounting SU4/2D with clip G4 1053 (WT)
or G4 1050 (without WT) • solder terminals sockets SU4/2L with clip G4 1053 (WT) or G4 1050 (without WT) and spring
clamp G4 1040 • solder terminals sockets G4/2 with clip G4 1053 (WT) or G4 1050 (without WT) • direct PCB mounting.
❶ Plug-in sockets GZT2, GZM2 may be linked with inter­­­­con­nection strip type ZGGZ4 (see page 263).
❷For sockets GZMB2 - see page 250 (wire connection).
112
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R2
miniature industrial relays
Contact material selection for different load types
• AgNi - for resistive or inductive loads,
• AgNi/Au 0,2 µm - Au protects the contact surface during storage.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Additional
features
Contact material
20 - AgNi
21 - AgNi/Au 0,2 µm
see Tables 1, 2 page 110
Number and type of contacts
12 - 2 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
5 - for PCB
7 - for PCB, with threaded bolt
9 - for plug-in sockets, with threaded bolt
Additional features ❶
without marks - without additional features ❷
WT - mechanical indicator + lockable front test button
WTL - mechanical indicator + lockable front test button + light indicator (LED diode)
WTD - mechanical indicator + lockable front test button + surge suppression element (diode)
WTLD - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (diode)
❶ WT - standard features of relays for plug-in sockets. WTD, WTLD - only for DC coils
❷ Refer relays for PCB and with threaded bolt
Test buttons (no latching) and plugs need to ordered saparately. They substitute buttons type T. To exchange by Customer themselves.
Information on test buttons (no latching) and plugs - page 265.
• Button R4P-0001-A - orange colour (AC coils)
• Button R4P-0001-D - green colour (DC coils)
• Plug R4W-0003-A - orange colour (AC coils)
• Plug R4W-0003-D - green colour (DC coils)
Note:
For relays with additional features D - surge suppression element (diode) (versions WTD and WTLD) - fixed supply
polarity compulsory for the DC load of coils: +A1(13) / -A2(14). The polarity is indicated on the relay cover. For other
versions of the relays with DC coils any polarity is possible.
Examples of ordering codes:
R2-2012-23-1024-WT
R2-2012-25-5024
relay R2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
24 V DC, with mechanical indicator and lockable front test button, in cover IP 40
relay R2, for PCB, two changeover contacts, contact material AgNi, coil voltage 24 V AC
50/60 Hz, in cover IP 40
113
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R3
miniature industrial relays
• Relays of general application • For plug-in sockets: 35 mm rail mount
acc. to PN-EN 60715; on panel mounting • Miniature dimensions •
Cadmium - free contacts • AC and DC coils • WT (mechanical indicator
+ lockable front test button) - standard features of relays for plug-in
sockets. Relays may be provided with the test buttons (no latching)
and plugs - page 265
• Recognitions, certifications, directives: RoHS, AUCOTEAM GmbH
Berlin - railroad standard,
10 A / 250 V AC
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
Insulation rated voltage
Rated surge voltage
General data
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
(NO/NC)
Vibration resistance
The data in bold type pertain to the standard versions of the relays.
www.relpol.com.pl
1 200 cycles/hour
18 000 cycles/hour
6 ... 240 V
5 ... 220 V
AC:  0,2 Un
DC:  0,1 Un
see Tables 1, 2
1,6 VA
0,9 W
250 V AC
with AC coils: 2
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
114
3 CO
AgNi, AgNi/Au 0,2 µm
250 V / 440 V
10 V
10 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor)
10 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
20 A
10 A
2 500 VA
0,3 W
 100 m
with DC coils: 4
III
3
2 500 V AC
1 500 V AC
2 500 V AC
500 V 1,2 / 50 µs
000 V 1,2 / 50 µs
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 2,5 mm
 4 mm
AC: 10
ms / 8 ms
DC: 13
ms / 3 ms
> 105 10 A, 250 V AC
see Fig. 2
> 2 x 107
27,5 x 21,2 x 35,6 mm ❶ 27,5 x 21,2 x 33 mm ❷
35 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 40
PN-EN 60529
RTI
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
❶ For plug-in sockets version: standard (WT) ❷ For version with threaded bolt
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R3
miniature industrial relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1005
5
28
± 10%
4,0
1006
6
40
± 10%
4,8
5,5
6,6
1012
12
160
± 10%
9,6
13,2
1024
24
640
± 10%
19,2
26,4
1048
48
2 600
± 10%
38,4
52,8
1060
60
4 000
± 10%
48,0
66,0
1080
80
7 100
± 10%
64,0
88,0
1110
110
13 600
± 10%
88,0
121,0
1125
125
16 000
± 10%
100,0
137,5
1220
220
54 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
5006
6
9,8
± 10%
5012
12
39,5
5024
24
158
5042
42
5048
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
4,8
6,6
± 10%
9,6
13,2
± 10%
19,2
26,4
470
± 10%
33,6
46,2
48
640
± 10%
38,4
52,8
5060
60
930
± 10%
48,0
66,0
5080
80
1 720
± 10%
64,0
88,0
5110
110
3 450
± 10%
88,0
121,0
5115
115
3 610
± 10%
92,0
127,0
5120
120
3 770
± 10%
96,0
132,0
5127
127
4 000
± 10%
101,6
139,0
5220
220
15 400
± 10%
176,0
242,0
5230
230
16 100
± 10%
184,0
253,0
5240
240
16 800
± 10%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
Test buttons R4P-0001 and plugs R4W-0003 need
to ordered saparately. They substitute buttons type T.
To exchange by Customer themselves. Information
on test buttons (no latching) and plugs - page 265.
115
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R3
miniature industrial relays
3 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
AC1
N - electrical life
at AC1
Mounting
Relays R3 are offered in versions: • standard WT
(mechanical indicator + lockable front test button),
for plug-in sockets. In standard version of relays (WT)
is possibility self-exchange of button type T for test
button R4P-0001 (no latching) or plug R4W-0003
(no manual operation). Test buttons (no latching) and
plugs need to ordered saparately • with threaded bolt.
Relays R3 are designed for: • screw terminals plug-in
sockets GZT3 ❶ and GZM3 ❶ with clip GZT4-0040
or G4 1052, 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with two M3 screws. Signalling /
protecting modules type M... are available with sockets.
❶ Plug-in sockets GZT3, GZM3 may be linked with inter­­­­con­nection strip
type ZGGZ4 (see page 263).
116
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R3
miniature industrial relays
Contact material selection for different load types
• AgNi - for resistive or inductive loads,
• AgNi/Au 0,2 µm - Au protects the contact surface during storage.
Ordering codes
Cover protection
category
Type
Contact Number and type of
material
contacts
Connection
mode
Coil code
Additional
features
Contact material
20 - AgNi
21 - AgNi/Au 0,2 µm
see Tables 1, 2 page 115
Number and type of contacts
13 - 3 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
9 - for plug-in sockets, with threaded bolt
Additional features ❶
without marks - without additional features ❷
WT - mechanical indicator + lockable front test button
WTL - mechanical indicator + lockable front test button + light indicator (LED diode)
WTD - mechanical indicator + lockable front test button + surge suppression element (diode)
WTLD - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (diode)
❶ WT - standard features of relays for plug-in sockets. WTD, WTLD - only for DC coils
❷ Refer relays with threaded bolt
Test buttons (no latching) and plugs need to ordered saparately. They substitute buttons type T. To exchange by Customer themselves.
Information on test buttons (no latching) and plugs - page 265.
• Button R4P-0001-A - orange colour (AC coils)
• Button R4P-0001-D - green colour (DC coils)
• Plug R4W-0003-A - orange colour (AC coils)
• Plug R4W-0003-D - green colour (DC coils)
Note:
For relays with additional features D - surge suppression element (diode) (versions WTD and WTLD) - fixed supply
polarity compulsory for the DC load of coils: +A1(13) / -A2(14). The polarity is indicated on the relay cover. For other
versions of the relays with DC coils any polarity is possible.
Example of ordering code:
R3-2013-23-1024-WT
relay R3, for plug-in sockets, three changeover contacts, contact material AgNi, coil
voltage 24 V DC, with mechanical indicator and lockable front test button, in cover IP 40
117
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R4
miniature industrial relays
6 A / 250 V AC
Contact data
• Relays of general application • Relays of general application • For plug-in sockets:
35 mm rail mount acc. to PN-EN 60715; on panel mounting; PCB mounting • For PCB
and soldering connections - option • Miniature dimensions • Cadmium - free contacts
• AC and DC coils • WT (mechanical indicator + lockable front test button) - standard
features of relays for plug-in sockets. Relays may be provided with the test buttons
(no latching) and plugs - page 265 • Have obtained LR Type Approval Certifi­
cate (Lloyd’s Register) - R4...WT • Recognitions, certifications, directives: RoHS,
AUCOTEAM GmbH Berlin - railroad standard,
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
DC
Insulation according to PN-EN 60664-1
AC
DC
1 200 cycles/hour
18 000 cycles/hour
6 ... 240 V
5 ... 220 V
AC:  0,2 Un
DC:  0,1 Un
see Tables 1, 2
1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
II
2
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
AC: 10
2 500 V AC
1 500 V AC
2 000 V AC
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 1,6 mm
 3,2 mm
General data
118
4 CO
AgNi, AgNi/Au 0,2 µm, AgNi/Au 5 µm
250 V / 250 V
10 V AgNi, 10 V AgNi/Au 0,2 µm, 5 V AgNi/Au 5 µm
6 A / 250 V AC
1,5 A / 120 V 0,75 A / 240 V (C300)
125 W (single-phase motor)
6 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
12 A
6A
1 500 VA
0,3 W AgNi, 0,3 W AgNi/Au 0,2 µm, 0,1 W AgNi/Au 5 µm
 100 m
• storage
• operating
(NO/NC)
ms / 8 ms
DC: 13
ms / 3 ms
> 105 6 A, 250 V AC
see Fig. 2
> 2 x 107
27,5 x 21,2 x 35,6 mm ❶ 27,5 x 21,1 x 33,5 mm ❷
27,5 x 21,2 x 33 mm ❸
35 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 40
PN-EN 60529
RTI
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For plug-in sockets version: standard (WT) ❷ For PCB version ❸ For version with threaded bolt
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R4
miniature industrial relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1005
5
28
± 10%
4,0
1006
6
40
± 10%
4,8
5,5
6,6
1012
12
160
± 10%
9,6
13,2
1024
24
640
± 10%
19,2
26,4
1048
48
2 600
± 10%
38,4
52,8
1060
60
4 000
± 10%
48,0
66,0
1080
80
7 100
± 10%
64,0
88,0
1110
110
13 600
± 10%
88,0
121,0
1125
125
16 000
± 10%
100,0
137,5
1220
220
54 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
5006
6
9,8
± 10%
5012
12
39,5
5024
24
158
5042
42
5048
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
4,8
6,6
± 10%
9,6
13,2
± 10%
19,2
26,4
470
± 10%
33,6
46,2
48
640
± 10%
38,4
52,8
5060
60
930
± 10%
48,0
66,0
5080
80
1 720
± 10%
64,0
88,0
5110
110
3 450
± 10%
88,0
121,0
5115
115
3 610
± 10%
92,0
127,0
5120
120
3 770
± 10%
96,0
132,0
5127
127
4 000
± 10%
101,6
139,0
5220
220
15 400
± 10%
176,0
242,0
5230
230
16 100
± 10%
184,0
253,0
5240
240
16 800
± 10%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
EUROPRODUCT 2002
for electromagnetic relays
R2...WT, R3...WT, R4...WT
with sockets GZT2, GZT3, GZT4
ELECTROPRODUCT 2003
for electromagnetic relays
R2, R3, R4
119
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R4
miniature industrial relays
Test buttons R4P-0001 and plugs R4W-0003 need
to ordered saparately. They substitute buttons type T.
To exchange by Customer themselves. Information
on test buttons (no latching) and plugs - page 265.
Mounting
Relays R4 are offered in versions: • standard WT
(mechanical indicator + lockable front test button), for
plug-in sockets. In standard version of relays (WT)
is possibility self-exchange of button type T for
test button R4P-0001 (no latching) or plug R4W-0003
(no manual operation). Test buttons (no latching) and
plugs need to ordered saparately • for PCB (without WT)
• with threaded bolt.
GZMB4
Spring terminals
plug-in socket for R4
- see page 253.
120
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R4
miniature industrial relays
AC1
4 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
N - electrical life
at AC1
Mounting
Relays R4 are designed for: • screw terminals plug-in sockets GZT4 ❶ and GZM4 ❶ with clip GZT4-0040 or G4 1052,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • spring terminals plug-in sockets
GZMB4 ❷with clip GZMB4-0040 or G4 1052, 35 mm rail mount acc. to PN-EN 60715. Signalling / protecting modules
type M... are available with sockets (see page 261) • screw terminals plug-in sockets GZ4 with clip G4 1052 or plug-in
sockets GS4 with clip GS4-0036, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws •
plug-in sockets for PCB mounting SU4D with clip G4 1053 (WT) or G4 1050 (without WT) • solder terminals sockets
SU4L with clip G4 1053 (WT) or G4 1050 (without WT) and spring clamp G4 1040 • solder terminals sockets G4 with
clip G4 1053 (WT) or G4 1050 (without WT) • direct PCB mounting..
❶ Plug-in sockets GZT4, GZM4 may be linked with inter­­­­con­nection strip type ZGGZ4 (see page 263).
❷For sockets GZMB4 - see page 253 (wire connection).
121
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R4
miniature industrial relays
Contact material selection for different load types
• AgNi - for resistive or inductive loads,
• AgNi/Au 0,2 µm - Au protects the contact surface during storage,
• AgNi/Au 5 µm - for small resistive loads in control circuits.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Additional
features
Contact material
20 - AgNi
21 - AgNi/Au 0,2 µm
23 - AgNi/Au 5 µm
see Tables 1, 2 page 119
Number and type of contacts
14 - 4 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
5 - for PCB
7 - for PCB, with threaded bolt
9 - for plug-in sockets, with threaded bolt
Additional features ❶
without marks - without additional features ❷
- mechanical indicator + lockable front test button
WT WTL - mechanical indicator + lockable front test button + light indicator (LED diode)
WTD - mechanical indicator + lockable front test button + surge suppression element (diode)
WTLD - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (diode)
❶ WT - standard features of relays for plug-in sockets. WTD, WTLD - only for DC coils
❷ Refer relays for PCB and with threaded bolt
Test buttons (no latching) and plugs need to ordered saparately. They substitute buttons type T. To exchange by Customer themselves.
Information on test buttons (no latching) and plugs - page 265.
• Button R4P-0001-A - orange colour (AC coils)
• Button R4P-0001-D - green colour (DC coils)
• Plug R4W-0003-A - orange colour (AC coils)
• Plug R4W-0003-D - green colour (DC coils)
Note:
For relays with additional features D - surge suppression element (diode) (versions WTD and WTLD) - fixed supply
polarity compulsory for the DC load of coils: +A1(13) / -A2(14). The polarity is indicated on the relay cover. For other
versions of the relays with DC coils any polarity is possible.
Example of ordering code:
R4-2014-23-5230-WTL
relay R4, for plug-in sockets, four changeover contacts, contact material AgNi, coil voltage 230 V AC 50/60 Hz, with mechanical indicator and lockable front test button and light
indicator (LED diode), in cover IP 40
122
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RY2
miniature industrial relays
•Relays of general application
•For plug-in sockets: 35 mm rail mount acc. to PN-EN 60715;
on panel mounting
•For direct mounting on panel - cover with mounting flange
• Flat insert connectors - faston 187 (4,8 x 0,5 mm)
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
DC1
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO
AgNi, AgCdO
250 V / 440 V
5 V AgNi, 10 V AgCdO
12 A / 250 V AC
12 A / 30 V DC
5 mA AgNi, 10 mA AgCdO
20 A
12 A
3 000 VA
0,3 W AgNi, 1 W AgCdO
 100 m
1 200 cycles/hour
18 000 cycles/hour
6 ... 240 V
5 ... 220 V
AC:  0,2 Un DC:  0,1 Un
see Tables 1, 2
1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
15 ms / 10 ms
General data
2 500 V AC
1 000 V AC
2 500 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 2,6 mm
 4 mm
> 105 12 A, 250 V AC
see Fig. 2
> 107
27,5 x 21,1 x 34,5 mm ❶
35 g
-40...+70 oC
-40...+55 oC
IP 40
PN-EN 60529
10 g
5 g 15...150 Hz
The data in bold type pertain to the standard versions of the relays.
❶ For plug-in sockets version: standard
123
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RY2
miniature industrial relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1005
5
28
± 10%
4,0
1006
6
40
± 10%
4,8
5,5
6,6
1012
12
160
± 10%
9,6
13,2
1024
24
640
± 10%
19,2
26,4
1048
48
2 600
± 10%
38,4
52,8
1060
60
4 000
± 10%
48,0
66,0
1080
80
7 100
± 10%
64,0
88,0
1110
110
13 600
± 10%
88,0
121,0
1125
125
16 000
± 10%
100,0
137,5
1220
220
54 000
± 10%
176,0
242,0
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
5006
6
9,8
± 10%
4,8
6,6
5012
12
39,5
± 10%
9,6
13,2
5024
24
158
± 10%
19,2
26,4
5042
42
470
± 10%
33,6
46,2
5048
48
640
± 10%
38,4
52,8
5060
60
930
± 10%
48,0
66,0
5080
80
1 720
± 10%
64,0
88,0
5110
110
3 450
± 10%
88,0
121,0
5120
120
3 770
± 10%
96,0
132,0
5127
127
4 000
± 10%
101,6
139,7
5220
220
15 400
± 10%
176,0
242,0
5230
230
16 100
± 10%
184,0
253,0
5240
240
16 800
± 10%
192,0
264,0
GZY2G
Screw terminals
plug-in sockets
for RY2
- see page 255.
124
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RY2
miniature industrial relays
AC1
N - electrical life
at AC1
2 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
125
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RY2
miniature industrial relays
Mounting
Relays RY2 are offered in versions: • standard, for plug-in sockets • with mounting flange in the upper wall of the cover.
Relays RY2 are designed for: • screw terminals plug-in sockets GZY2G, 35 mm rail mount acc. to PN-EN 60715 or
on panel mounting with two M3 screws • flat insert connectors - faston 187 (4,8 x 0,5 mm), relays are direct on panel
mounting with two M3 screws - cover with mounting flange.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Additional
features
Contact material
10 - AgCdO
20 - AgNi
see Tables 1, 2 page 124
Number and type of contacts
12 - 2 CO
Cover protection category
2 - in cover, IP 40 version
4 - in cover with mounting flange, IP 40 version
Connection mode
6 - for flat insert connectors - faston 187 (4,8 x 0,5 mm)
and for plug-in sockets
Additional features ❶
without marks - without additional features
- light indicator (LED diode)
L
D
- surge suppression element (diode)
LD - light indicator (LED diode) + surge suppression element (diode)
❶ D, LD - only for DC coils
Note:
For relays with additional features D - surge suppression element (diode) (versions D and LD) - fixed supply polarity
compulsory for the DC load of coils: +A1(7) / -A2(8). The polarity is indicated on the relay cover. For other versions
of the relays with DC coils any polarity is possible.
Examples of ordering codes:
RY2-2012-26-1024
RY2-2012-26-5230-L
relay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
24 V DC, in cover IP 40
relay RY2, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
230 V AC 50/60 Hz, with light indicator (LED diode), in cover IP 40
126
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R2M
miniature industrial relays
• Relays of general application
•For plug-in sockets: 35 mm rail mount acc. to PN-EN
60715; on panel mounting
• For PCB and for soldering connections
• AC and DC coils
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
DC1
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO
AgNi, AgNi/Au 0,2 µm, AgSnO2
250 V / 250 V
5 V AgNi, 5 V AgNi/Au 0,2 µm, 10 V AgSnO2
5 A / 250 V AC
5 A / 24 V DC
5 mA AgNi, 5 mA AgNi/Au 0,2 µm, 10 mA AgSnO2
5A
1 250 VA
0,3 W AgNi, 0,3 W AgNi/Au 0,2 µm, 1 W AgSnO2
 100 m
1 200 cycles/hour
36 000 cycles/hour
6 ... 240 V
6 ... 110 V
 0,05 Un
see Tables 1, 2
1,2 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
II
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
AC: 8
General data
2 000 V AC
1 000 V AC
2 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 3 mm
 4 mm
ms / 7 ms DC: 10
ms / 3 ms
> 2 x 105 5 A, 250 V AC
see Fig. 2
> 107
27,5 x 14 x 32,9 mm
22 g
-40...+70 oC
-40...+55 oC
IP 40
PN-EN 60529
10 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
Note: relays with AgNi contacts can be used up to 5 A at resistive and inductive load.
127
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R2M
miniature industrial relays
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1006
6
47
± 10%
4,8
6,6
1012
12
188
± 10%
9,6
13,2
1024
24
750
± 10%
19,2
26,4
1048
48
2 660
± 10%
38,4
52,8
1060
60
4 000
± 10%
48,0
66,0
1080
80
7 100
± 10%
64,0
88,0
1110
110
13 480
± 10%
88,0
121,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
5006
6
16
± 10%
4,8
6,6
5012
12
68
± 10%
9,6
13,2
5024
24
270
± 10%
19,2
26,4
5050
50
1 150
± 10%
40,0
55,0
5100
100
5 590
± 10%
80,0
110,0
5110
110
5 670
± 10%
88,0
121,0
5115
115
5 990
± 10%
92,0
126,0
5120
120
6 390
± 10%
96,0
132,0
5220
220
21 470
± 10%
176,0
242,0
5230
230
21 470
± 10%
184,0
253,0
5240
240
25 390
± 10%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
128
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R2M
miniature industrial relays
AC1
2 CO
DC1
N - electrical life
at AC1
Mounting
Relays R2M are designed for: • screw terminals plug-in sockets GZ2 with clip GZ2 1060 and spring clamp GZ2 1111,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • plug-in sockets for PCB mounting
S2M with clip G4 1050 • solder terminals sockets G2M with clip G4 1050 and spring clamp G2M 1020 • direct PCB
mounting.
129
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R2M
miniature industrial relays
Contact material selection for different load types
• AgNi - for resistive or inductive loads,
• AgNi/Au 0,2 µm - Au protects the contact surface during storage,
• AgSnO2 - for capacitive loads or incandescent lamp loads.
Ordering codes
Cover protection
category
Type
Contact
material
Contact material
Number and type
of contacts
Connection
mode
Coil code
see Tables 1, 2 page 128
20 - AgNi
21 - AgNi/Au 0,2 µm
30 - AgSnO2
Number and type of contacts
12 - 2 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
5 - for PCB
Examples of ordering codes:
R2M-2012-23-5230
R2M-2012-25-1024
relay R2M, for plug-in sockets, two changeover contacts, contact material AgNi, coil voltage
230 V AC 50/60 Hz, in cover IP 40
relay R2M, for PCB, two changeover contacts, contact material AgNi, coil voltage 24 V DC,
in cover IP 40
PIR2M
Interface relay:
relay R2M
and socket GZ2
- see page 190
130
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R15 - 2 CO, 3 CO
industrial relays of small dimensions
R15 - 2 CO
• Relays of general application • For plug-in sockets: 35 mm rail mount
acc. to PN-EN 60715; on panel mounting; solder terminals • Contacts
AgNi • Coils AC and DC • WT (mechanical indicator + lockable front
test button) - standard features of relays in cover, for plug-in sockets.
Relays may be provided with the test buttons (no latching) and plugs
- page 265 • Have obtained LR Type Approval Certificate (Lloyd’s
Register) • Recognitions, certifications, directives: RoHS, AUCOTEAM
GmbH Berlin - railroad standard,
R15 - 3 CO
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
50/60 Hz
AC
DC
Insulation according to PN-EN 60664-1
2 CO, 3 CO
AgNi, AgNi/Au 0,2 µm, AgNi/Au 5 µm
250 V / 440 V
10 V AgNi, 10 V AgNi/Au 0,2 µm, 5 V AgNi/Au 5 µm
10 A / 250 V AC
10 A / 277 V AC UL 508
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor; 0,5 HP / 240 V AC UL 508)
10 A / 24 V DC (see Fig. 3)
0,22 A / 120 V
0,1 A / 250 V (R300)
5 mA
20 A
10 A
2 500 VA
0,3 W AgNi, 0,3 W AgNi/Au 0,2 µm, 0,05 W AgNi/Au 5 µm
 100 m
1 200 cycles/hour
12 000 cycles/hour
6 ... 240 V
6 ... 220 V
0,15 Un DC:  0,1 Un
see Tables 1, 2
AC: 2,8 VA 50 Hz 2,5 VA 60 Hz DC: 1,5 W
AC: 
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
AC: 12
General data
2 500 V AC
1 500 V AC
2 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 3 mm
 4,2 mm
ms / 10 ms
DC: 18
ms / 7 ms
> 2 x 105 10 A, 250 V AC
see Fig. 2
> 2 x 107
35 x 35 x 54,4 mm
83 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 40
PN-EN 60529
RTI PN-EN 116000-3
10 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
131
www.relpol.com.pl
R15 - 2 CO, 3 CO
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1006
6
28
± 10%
4,8
6,6
1012
12
110
± 10%
9,6
13,2
1024
24
430
± 10%
19,2
26,4
1048
48
1 750
± 10%
38,4
52,8
1060
60
2 700
± 10%
48,0
66,0
1110
110
9 200
± 10%
88,0
121,0
1120
120
11 000
± 10%
96,0
132,0
1220
220
37 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
5006
6
4,3
± 15%
4,8
6,6
5012
12
18,5
± 15%
9,6
13,2
5024
24
75
± 15%
19,2
26,4
5048
48
305
± 15%
38,4
52,8
5060
60
475
± 15%
48,0
66,0
5115
115
1 840
± 15%
92,0
126,5
5120
120
1 910
± 15%
96,0
132,0
5220
220
6 980
± 15%
176,0
242,0
5230
230
7 080
± 15%
184,0
253,0
5240
240
7 760
± 15%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
2 CO
2 CO
3 CO
3 CO
Test buttons R15-M404 and plugs R15-M203 need
to ordered saparately. They substitute buttons type T.
To exchange by Customer themselves. Information
on test buttons (no latching) and plugs - page 265.
132
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R15 - 2 CO, 3 CO
industrial relays of small dimensions
AC1
N - electrical life
at AC1
2 CO
3 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
Mounting
Relays R15 - 2 CO are designed for: • screw terminals plug-in sockets PZ8 with clip PZ11 0031, 35 mm rail mount acc. to PN-EN
60715 or on panel mounting with two M3 screws • screw terminals plug-in sockets GZU8 with clip GZU 1052, 35 mm rail mount
acc. to PN-EN 60715 • screw terminals plug-in sockets GZ8 with clip GZ 1050, on panel mounting with two M3 screws • screw terminals plug-in sockets GZS8, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • screw terminals
plug-in sockets GZP8 with clip GZP-0054, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • solder
terminals sockets GOP8 with clip R159 1051 and spring clamp R15 5922 • direct PCB mounting.
Relays R15 - 3 CO are designed for: • screw terminals plug-in sockets PS11 and PZ11 with clip PZ11 0031, 35 mm rail mount acc.
to PN-EN 60715 or on panel mounting with two M3 screws • screw terminals plug-in sockets GZU11 with clip GZU 1052, 35 mm rail
mount acc. to PN-EN 60715 • screw terminals plug-in sockets GZ11 with clip GZ 1050, on panel mounting with two M3 screws • screw
terminals plug-in sockets GZS11, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • screw terminals
plug-in sockets GZP11 with clip GZP-0054, 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • solder
terminals sockets GOP11 with clip R159 1051 and spring clamp R15 5922 • direct PCB mounting.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
133
R15 - 2 CO, 3 CO
industrial relays of small dimensions
Mounting
Relays R15 - 2 CO, 3 CO are offered in version: • standard WT (mechanical indicator + lockable front test button),
for plug-in sockets. In standard version of relays (WT) is possibility self-exchange of button type T for test
button R15-M404 (no latching) or plug R15-M203 (no manual operation). Test buttons (no latching) and plugs
need to ordered saparately.
Ordering codes
Cover protection
category
Type
Contact
material
R 1 5 —
Number and type
of contacts
Connection
mode
—
Coil code
—
Additional
features
—
Contact material
20 - AgNi
21 - AgNi/Au 0,2 µm
23 - AgNi/Au 5 µm
see Tables 1, 2 page 132
Number and type of contacts
12 - 2 CO
13 - 3 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
Additional features ❶
WT - mechanical indicator + lockable front test button
WTL - mechanical indicator + lockable front test button + light indicator (LED diode)
WTD - mechanical indicator + lockable front test button + surge suppression element (diode)
WTLD - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (diode)
WTV - mechanical indicator + lockable front test button + surge suppression element (varistor)
WTLV - mechanical indicator + lockable front test button + light indicator (LED diode) + surge suppression element (varistor)
❶ WT - standard features of relays for plug-in sockets. WTD, WTLD - only for DC coils, WTV, WTLV - only for AC coils
Test buttons (no latching) and plugs need to ordered saparately. They substitute buttons type T. To exchange by Customer themselves.
Information on test buttons (no latching) and plugs - page 265.
• Button R15-M404-A - orange colour (AC coils)
• Button R15-M404-D - green colour (DC coils)
• Plug R15-M203-A
- orange colour (AC coils)
• Plug R15-M203-D - green colour (DC coils)
Note:
For relays with additional features D - surge suppression element (diode) (versions WTD and WTLD) - fixed supply
polarity compulsory for the DC load of coils: +A1(2) / -A2(7) for R15 - 2 CO and +A1(2) / -A2(10) for R15 - 3 CO.
The polarity is indicated on the relay cover. For other versions of the relays with DC coils any polarity is possible.
Examples of ordering codes:
R15-2012-23-1024-WT
R15-2013-23-5230-WTL
relay R15, for plug-in sockets, two changeover contacts, contact material AgNi, coil
voltage 24 V DC, with mechanical indicator and lockable front test button, in cover IP 40
relay R15, for plug-in sockets, three changeover contacts, contact material AgNi, coil
voltage 230 V AC 50/60 Hz, with mechanical indicator and lockable front test button and
light indicator (LED diode), in cover IP 40
134
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R15 - 4 CO
industrial relays of small dimensions
•Relays of general application
•For plug-in sockets: 35 mm rail mount acc. to PN-EN 60715;
on panel mounting; solder terminals
•Coils AC and DC
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
Coil data
4 CO
AgCdO, AgCdO/Au 0,2 µm, AgCdO/Au 5 µm
250 V / 440 V
10 V AgCdO, 10 V AgCdO/Au 0,2 µm, 5 V AgCdO/Au 5 µm
10 A / 250 V AC
10 A / 277 V AC UL 508
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor; 0,5 HP / 240 V AC UL 508)
10 A / 24 V DC (see Fig. 3)
0,22 A / 120 V
0,1 A / 250 V (R300)
10 mA AgCdO, 10 mA AgCdO/Au 0,2 µm, 5 mA AgCdO/Au 5 µm
20 A
10 A
2 500 VA
0,5 W AgCdO, 0,5 W AgCdO/Au 0,2 µm, 0,05 W AgCdO/Au 5 µm
 100 m
1 200 cycles/hour
12 000 cycles/hour
Rated voltage
50 Hz, 60 Hz AC
DC
Must release voltage
Operating range of supply voltage
Rated power consumption
6 ... 240 V
6 ... 220 V
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
AC: 12
Insulation according to PN-EN 60664-1
General data
0,15 Un DC:  0,1 Un
see Tables 1, 3, 4
AC: 2,8 VA 50 Hz 2,5 VA 60 Hz DC: 1,5 W
AC: 
2 500 V AC
1 500 V AC
2 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 3 mm
 3,2 mm
ms / 10 ms
DC: 18
ms / 7 ms
> 2 x 105 10 A, 250 V AC
see Fig. 2
> 2 x 107
35 x 42,5 x 54,5 mm
95 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 40
PN-EN 60529
RTI PN-EN 116000-3
10 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
135
www.relpol.com.pl
R15 - 4 CO
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1006
6
28
± 10%
4,8
6,6
1012
12
110
± 10%
9,6
13,2
1024
24
430
± 10%
19,2
26,4
1048
48
1 750
± 10%
38,4
52,8
1060
60
2 700
± 10%
48,0
66,0
1110
110
9 200
± 10%
88,0
121,0
1120
120
11 000
± 10%
96,0
132,0
1220
220
37 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50 Hz voltage version, basic
Coil code
Rated voltage
V AC
Table 3
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
3006
6
4,8
± 15%
4,8
6,6
3012
12
20
± 15%
9,6
13,2
3024
24
72
± 15%
19,2
26,4
3048
48
360
± 15%
38,4
52,8
3060
60
520
± 15%
48,0
66,0
3115
115
2 100
± 15%
92,0
126,5
3120
120
2 300
± 15%
96,0
132,0
3220
220
7 000
± 15%
176,0
242,0
3230
230
7 900
± 15%
184,0
253,0
3240
240
8 300
± 15%
192,0
264,0
Coil data - AC 60 Hz voltage version, special
Coil code
Rated voltage
V AC
Table 4
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
6006
6
4,8
± 15%
4,8
6,6
6012
12
17
± 15%
9,6
13,2
6024
24
65
± 15%
19,2
26,4
6048
48
310
± 15%
38,4
52,8
6060
60
490
± 15%
48,0
66,0
6110
110
1 760
± 15%
88,0
121,0
6120
120
2 000
± 15%
96,0
132,0
6220
220
6 900
± 15%
176,0
242,0
6230
230
7 000
± 15%
184,0
253,0
6240
240
7 100
± 15%
192,0
264,0
136
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R15 - 4 CO
industrial relays of small dimensions
AC1
N - electrical life
at AC1
4 CO
Note: the indicated polarity of the supply refers to the relays
with extra equipment D - surge suppression element (diode)
- for DC coils only.
137
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R15 - 4 CO
industrial relays of small dimensions
Mounting
Relays R15 4 - CO are designed for: • screw terminals
plug-in sockets GZ14U with clip GZ14 0737, 35 mm rail
mount acc. to PN-EN 60715 • screw terminals plug-in
sockets GZ14 with clip GZ14 0737, on panel mounting
with two M3 screws • screw terminals plug-in sockets
GZ14Z with clip GZ14 0737, on panel mounting with two
M3 screws • solder terminals sockets GOP14 with clip
R15 0736 and spring clamp R15 5922.
GZ14Z
Screw terminals
plug-in socket
for R15 - 4 CO
to be mounted behind
the assembly panel
- see page 260.
Ordering codes
Cover protection
category
Type
Contact
material
R 1 5 —
Number and type
of contacts
—
Connection
mode
Coil code
—
Additional
features
—
Contact material
10 - AgCdO
11 - AgCdO/Au 0,2 µm
13 - AgCdO/Au 5 µm
see Tables 1, 3, 4 page 136
Number and type of contacts
14 - 4 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
Additional features ❶
without marks - without additional features
K
- test button without block function
L
- light indicator (LED diode)
D
- surge suppression element (diode)
KL - test button without block function + light indicator (LED diode)
KD - test button without block function + surge suppression element (diode)
LD - light indicator (LED diode) + surge suppression element (diode)
KLD - test button without block function + light indicator (LED diode) + surge suppression element (diode)
❶ D, KD, LD, KLD - only for DC coils
Note:
For relays with additional features D - surge suppression element (diode) (versions D, KD, LD, KLD) - fixed supply
polarity compulsory for the DC load of coils: -A1(13) / +A2(14). The polarity is indicated on the relay cover. For other
versions of the relays with DC coils any polarity is possible.
Examples of ordering codes:
R15-1014-23-1024-KD R15-1114-23-3230-KL relay R15, for plug-in sockets, four changeover contacts, contact material AgCdO, coil
voltage 24 V DC, with test button without block function and surge suppression element
(diode), in cover IP 40
relay R15, for plug-in sockets, four changeover contacts, contact material AgCdO/Au
0,2 µm, coil voltage 230 V AC 50 Hz, with test button without block function and light
indicator (LED diode), in cover IP 40
138
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RUC
industrial relays of small dimensions
with adaptor (V)
with adaptor (H)
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
• Power relays of general application • AC and DC coils • Mounting:
in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB
• Versions: faston 187 (4,8 x 0,5 mm); faston 250 (6,3 x 0,8 mm) • 3 mm contact gap (option - only in versions with normally open contacts) • Additional
features: K - test button; L - light indicator (LED) • Applications: control
of electromagnets; systems of heating, cooling, ventillation, air conditioning;
control with single-phase and three-phase motors; catering industry machines
and equipment; automation systems; photoelectric systems; etc.
• Recognitions, certifications, directives: RoHS,
AC
AC1
DC1
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
DC
Insulation according to PN-EN 60664-1
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
contacts
Contact - coil distance
General data
AC
DC
• between coil and
• contact clearance
• pole - pole
• clearance
• creepage
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Motor load according to UL 508
Dimensions (L x W x H)
Weight
Ambient temperature
Cover protection category
Shock / vibration resistance
Solder bath temperature
Soldering time
• storage
• operating
2 CO, 3 CO, 2 NO, 3 NO
2 NO, 3 NO with contact gap  3 mm
AgCdO, AgNi
400 V / 440 V
230 V / 250 V ❶
5 V AgNi, 10 V AgCdO
16 A / 250 V AC or 10 A / 400 V AC 16 A / 250 V AC ❶
16 A / 24 V DC (see Fig. 3)
5 mA AgNi, 10 mA AgCdO
40 A
16 A
4 000 VA
0,3 W AgNi, 1 W AgCdO
 100 m
1 200 cykli/h
12 000 cykli/h
6 ... 240 V 50/60 Hz
6 ... 220 V
AC:  0,15 Un see Tables 1, 2, 3, 4
2,8 VA 50 Hz
1,5 W
400 V 50 Hz ❶
DC: 
0,1 Un
2,5 VA 60 Hz
1,7 W with contact gap  3 mm
400 V AC
4 000 V 1,2 / 50 µs
III
2
2 500 V AC
type of insulation: basic
1 500 V AC type of clearance: micro-disconnection
2 500 V AC
with contact gap  3 mm, type of clearance: full-disconnection
2 500 V AC
type of insulation: basic
 5 mm 2 CO, 2 NO  4 mm 3 CO, 3 NO
 8 mm 2 CO, 2 NO  5 mm 3 CO, 3 NO
20 ms / 15 ms
> 105 16 A, 250 V AC
> 105 10 A, 400 V AC
see Fig. 2
> 107
2 CO: 0,33 HP 120 V AC, single-phase motor 0,5 HP 240 V AC, single-phase motor
3 CO: 0,33 HP 120 V AC, single-phase motor 0,5 HP 240 V AC, single-phase motor
3 CO: 0,5 HP 240 V AC, three-phase motor
RUC faston 4,8 x 0,5 ❷
RUC faston 6,3 x 0,8 ❸
80 g ❹ 85 g ❺
-40...+85 oC
AC: -40...+55 oC 3 CO, 3 NO / 16 A
(+70 oC 2 CO, 2 NO / 16 A)
DC: -40...+55 oC 3 CO, 3 NO / 16 A
(+70oC3CO,3NO/10A;2CO,2NO/16A)
IP 00
PN-EN 60529
10 g / 5 g 10...150 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
❶ For RUC faston 4,8 x 0,5 with GUC11 socket, max. switching voltages
❷ For plug-in sockets version: 36,1 x 38,6 x 45,5 mm. For version: with (V) adaptor:
and coil voltages of relays are limited to 250 V AC / DC.
58,75 x 38,6 x 45,9 mm; with (H) adaptor: 46,8 x 38,6 x 62,45 mm. For version with mounting flange: 66,3 x 38,6 x 36,1 mm. For PCB version:
36,1 x 38,6 x 52,5 mm. ❸ For version: with (V) adaptor: 62,4 x 38,6 x 45,9 mm; with (H) adaptor: 46,8 x 38,6 x 66,1 mm. For version with mounting
❹ Weight of plug-in sockets version and PCB version (RUC faston 4,8 x 0,5). ❺ Weight of version with (V) or (H)
flange: 66,3 x 38,6 x 36,1 mm.
adaptor, and version with mounting flange.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
139
RUC
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1006
6
28
± 10%
4,8
6,6
1012
12
110
± 10%
9,6
13,2
1024
24
430
± 10%
19,2
26,4
1042
42
1 340
± 10%
33,6
46,2
1048
48
1 750
± 10%
38,4
52,8
1060
60
2 700
± 10%
48,0
66,0
1110
110
9 200
± 10%
88,0
121,0
1120
120
11 000
± 10%
96,0
132,0
1220
220
37 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - DC voltage version, reinforced
Coil code ❻
Rated voltage
V DC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
W012
12
85
± 10%
9,6
13,2
W024
24
345
± 10%
19,2
26,4
W048
48
1 370
± 10%
38,4
52,8
W110
110
7 300
± 10%
88,0
121,0
W220
220
30 000
± 10%
176,0
242,0
❻For version with contact gap  3 mm.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 3
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
5006
6
4,3
± 10%
4,8
6,6
5012
12
18,5
± 10%
9,6
13,2
5024
24
75
± 10%
19,2
26,4
5115
115
1 840
± 10%
92,0
126,5
5120
120
1 910
± 10%
96,0
132,0
5220
220
6 980
± 10%
176,0
242,0
5230
230
7 080
± 10%
184,0
253,0
5240
240
7 760
± 10%
192,0
264,0
Coil data - AC 50 Hz voltage version
Table 4
Coil code
Rated voltage
V AC
Coil resistance
at 20 °C

Acceptable
resistance
3400
400
21 500
± 10%
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
320,0
440,0
140
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RUC
industrial relays of small dimensions
Fig. 1
Fig. 2
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Breaking capacity [kVA]
DC current [A]
Max. DC breaking capacity
A -resistive load DC1
B -inductive load L/R = 40 ms
DC voltage [V]
Fig. 3
Connection diagrams (pin side view)
2 CO
2 NO
3 CO
3 NO
Dimensions - RUC faston 4,8 x 0,5
- PCB version
11
52,5
Dimensions - RUC faston 4,8 x 0,5
- plug-in version (standard)
Power factor
N - electrical life
at AC1
141
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RUC
industrial relays of small dimensions
Dimensions - RUC faston 4,8 x 0,5
- version with vertical adaptor (V)
Dimensions - RUC faston 4,8 x 0,5
- version with horizontal adaptor (H)
9,8
46,8
12
1,6
34,8
8,5
35,5
9,8
9,8
6,1
12
4,9
55,3
34,8
1,6
8,2
Dimensions - RUC faston 6,3 x 0,8
- version with vertical adaptor (V)
Dimensions - RUC faston 6,3 x 0,8
- version with horizontal adaptor (H)
Dimensions - RUC faston 4,8 x 0,5 (faston 6,3 x 0,8)
- version with mounting flange in the wall of the cover
Mounting
4,8 x 0,5
* (6,3 x 0,8)
7,15 (10,8) *
66,3
60,7
* - dimensions RUC faston 6,3 x 0,8
Relays RUC are offered in versions: • standard, for
screw terminals plug-in sockets GUC11 ❶ with clip MBA,
35 mm rail mount acc. to PN-EN 60715 or on panel
mounting with two M3 screws • with mounting flange
in the wall of the cover, on panel mounting with two M4
screws, flat insert connectors - faston 187 (4,8 x 0,5 mm)
or faston 250 (6,3 x 0,8 mm) • with vertical (V) or horizontal (H) adaptors for direct mounting on 35 mm rail mount
acc. to PN-EN 60715, flat insert connectors - faston 187
(4,8 x 0,5 mm) or faston 250 (6,3 x 0,8 mm) • for direct
PCB mounting ❼.
❼ Relays unavailable with (V) or (H) adaptor, and cover
with mounting flange.
❶ For RUC faston 4,8 x 0,5 with GUC11 socket, max. switching voltages
and coil voltages of relays are limited to 250 V AC / DC.
142
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RUC
industrial relays of small dimensions
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
R U C —
Connection
mode
—
Coil code
—
Additional
features
—
Contact material
10 - AgCdO
20 - AgNi
see Tables 1, 2, 3, 4 page 140
Number and type of contacts
12 - 2 CO
13 - 3 CO
22 - 2 NO
23 - 3 NO
52 - 2 NO, contact gap  3 mm ❽
53 - 3 NO, contact gap  3 mm ❽
Cover protection category
2 - in cover, IP 00 version ❾
4 - in cover with mounting flange, IP 00 version
V - in cover with vertical adaptor, IP 00 version
H - in cover with horizontal adaptor, IP 00 version
Connection mode
5 - for PCB
6 - for flat insert connectors - faston 187 (4,8 x 0,5 mm)
and for plug-in sockets
A - for flat insert connectors - faston 250 (6,3 x 0,8 mm)
Additional features
without marks - without additional features
K
- test button without block function ❿
L
- light indicator (LED diode)
KL - test button without block function + light indicator (LED diode)
❿
❽For versions with reinforced DC coils: W012, W024, W048, W110, W220 and with AC coils.
❾Only for version RUC faston 4,8 x 0,5.
❿Additional features is not available in versions of relays with contact gap  3 mm.
Examples of ordering codes:
RUC-2053-26-W024 relay RUC, faston 187 (4,8 x 0,5 mm), with contact gap  3 mm, for plug-in sockets
GUC11, three normally open contacts, contact material AgNi, reinforced coil voltage
24 V DC, in cover IP 00
RUC-2013-V6-3400-KL relay RUC, faston 187 (4,8 x 0,5 mm), for flat insert connectors, with vertical adaptor
(V), three changeover contacts, contact material AgNi, coil voltage 400 V AC 50 Hz,
with test button without block function and light indicator (LED diode), in cover IP 00
RUC-2052-HA-W220-L
relay RUC, faston 250 (6,3 x 0,8 mm), for flat insert connectors, with contact gap
 3 mm, with horizontal adaptor (H), two normally open contacts, contact material
AgNi, reinforced coil voltage 220 V DC, with light indicator (LED diode), in cover IP 00
RUC-1022-25-5024
relay RUC, for PCB, two normally open contacts, contact material AgCdO, coil voltage
24 V AC 50/60 Hz, in cover IP 00
143
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RUC-M
industrial relays for DC loads
with adaptor (V)
with adaptor (H)
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage Rated load DC1
DC L/R=40 ms
Min. switching current
Max. inrush current
Rated current
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
50/60 Hz
Insulation according to PN-EN 60664-1
AC
DC
1 NO (double-break)
2 NO
AgCdO
250 V DC; 250 V AC / 350 V DC; 440 V AC ❶
10 V
16 A / 24 V DC; 14 A / 110 V DC
12 A / 220 V DC
16 A / 24 V DC; 5,4 A / 110 V DC
3 A / 220 V DC
16 A / 250 V AC
10 mA
40 A 20 ms
16 A
1 W
 100 m
16 A / 24 V DC; 10,5 A / 110 V DC
4,5 A / 220 V DC
16 A / 24 V DC; 1,35 A / 110 V DC
0,45 A / 220 V DC
16 A / 250 V AC
1 200 cycles/hour
12 000 cycles/hour
12 ... 240 V
12 ... 220 V
AC:  0,15 Un AC: 0,85...1,1 Un
2,8 VA
1,7 W
DC: 
0,1 Un
DC: 0,8...1,1
Un
see Tables 1, 2
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
2 500 V AC
type of insulation: basic
4 000 V AC
type of clearance: full-disconnection
2 500 V AC
contacts 2 NO, type of insulation: basic
 6,3 mm
 8 mm
Operating / release time (typical values)
Electrical life
• resistive DC1
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
20 ms / 15 ms
General data
144
AC
DC
•Relays with permanent magnet whose magnetic field blows the
electric arc between the contacts; for high DC loads • AC and DC
coils • Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715;
on panel; PCB • Version: faston 187 (4,8 x 0,5 mm) • Contact gap:
3 mm (version 2 NO); 6 mm (version 1 NO) • Additional features:
L - light indicator (LED) • Applications: control of electro­magnets;
systems of heating, cooling, ventillation, air conditioning; control with
single-phase and three-phase motors; catering industry machines
and equipment; automation systems; photoelectric systems; etc.
• Recognitions, certifications, directives: RoHS,
> 2 x 105 12 A, 220 V DC
> 2 x 105 3 A, 220 V DC > 2 x 107
36,1 x 38,6 x 45,5 mm ❷
80 g ❸ 85 g ❹
-40...+85 oC
-40...+70 oC
IP 00
PN-EN 60529
10 g
5 g 10...150 Hz
max. 270 oC
max. 5 s
> 2 x 105 4,5 A, 220 V DC
> 2 x 105 0,45 A, 220 V DC
The data in bold type pertain to the standard versions of the relays.
❶ For RUC-M with GUC11 socket, max. switching voltages and coil voltages of relays are limited to 250 V AC / DC.
❷ For plug-in sockets version. For version: with (V) adaptor: 58,75 x 38,6 x 45,9 mm; with (H) adaptor: 46,8 x 38,6 x 62,45 mm.
For version with mounting flange: 66,3 x 38,6 x 36,1 mm. For PCB version: 36,1 x 38,6 x 52,5 mm.
❸ Weight of plug-in sockets version and PCB version. ❹ Weight of version with (V) or (H) adaptor, and version with mounting flange.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RUC-M
industrial relays for DC loads
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Coil operating range
V DC
Acceptable
resistance
min. (at 20 °C)
max. (at 55 °C)
W012
12
85
± 10%
9,6
13,2
W024
24
345
± 10%
19,2
26,4
W048
48
1 370
± 10%
38,4
52,8
W110
110
7 300
± 10%
88,0
121,0
W220
220
30 000
± 10%
176,0
242,0
Coil data - AC 50/60 Hz voltage version
Coil code
Table 2
Coil resistance
at 20 °C

Rated voltage
V AC
Coil operating range
V AC
Acceptable
resistance
min. (at 20 °C)
max. (at 55 °C)
5012
12
18,5
± 10%
9,6
5024
24
75
± 10%
19,2
26,4
5115
115
1 840
± 10%
92,0
126,5
5120
120
1 910
± 10%
96,0
132,0
5230
230
7 080
± 10%
184,0
253,0
5240
240
7 760
± 10%
192,0
264,0
Connection diagrams (pin side view)
Dimensions - version with mounting flange
in the wall of the cover
Magnet
2 NO
15,9
11,25
1 NO
11,25
Magnet
13,2
1 NO
2 NO
7,15
66,3
60,7
Design
The permanent magnet
is fixed on the contact
plate. Its magnetic field is
directed to the contacts
and it blows
the electric arc which
occurs when the DC load
is switched off.
4,8 x 0,5
22
11,25
145
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RUC-M
industrial relays for DC loads
Dimensions - plug-in version (standard)
2 NO
11
52,5
15,9
15,9
11,25
11,25
1 NO
11,25
2 NO
11,25
1 NO
Dimensions - PCB version
Dimensions - version with horizontal adaptor (H)
1 NO
2 NO
12
12
46,8
34,8
62,45
34,8
4,9
58,75
8,5
35,5
9,8
9,8
6,1
12
9,8
9,8
15,9
46,8
11,25
11,25
15,9
11,25
2 NO
11,25
Dimensions - version with vertical adaptor (V)
1 NO
11,25
22
11,25
22
8,2
11,25
22
11,25
Mounting
Relays RUC-M are offered in versions: • standard, for screw terminals plug-in sockets GUC11 ❶ with clip MBA,
35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws • with mounting flange in the wall
of the cover, on panel mounting with two M4 screws, flat insert connectors - faston 187 (4,8 x 0,5 mm) • with vertical
(V) or horizontal (H) adaptors for direct mounting on 35 mm rail mount acc. to PN-EN 60715, flat insert connectors faston 187 (4,8 x 0,5 mm) • for direct PCB mounting ❺.
146
❺ Relays unavailable with (V) or (H) adaptor, and cover with mounting flange.
❶ For RUC-M with GUC11 socket, max. switching voltages and coil voltages of relays are limited to 250 V AC/DC.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RUC-M
industrial relays for DC loads
Fig. 1
Fig. 2
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Power factor
N - electrical life
at AC1
Breaking capacity [kVA]
Ordering codes
Cover protection
category
Type
Contact
material
R U C – M —
Number and type
of contacts
Connection
mode
—
Coil code
Additional
features
—
—
Contact material
10 - AgCdO
Number and type of contacts
51 - 1 NO (double-break), contact gap  6 mm (3 + 3)
52 - 2 NO, contact gap  3 mm
see Tables 1, 2 page 145
Cover protection category
2 - in cover, IP 00 version
4 - in cover with mounting flange, IP 00 version
V - in cover with vertical adaptor, IP 00 version
H - in cover with horizontal adaptor, IP 00 version
Connection mode
5 - for PCB
6 - for flat insert connectors - faston 187 (4,8 x 0,5 mm)
and plug-in sockets
Additional features
without marks - without additional features
L - light indicator (LED diode)
Examples of ordering codes:
RUC-M-1051-26-W024 relay RUC-M, faston 187 (4,8 x 0,5 mm), with contact gap  6 mm (3+3), for plug-in
sockets GUC11, one normally open contact (double-break), contact material AgCdO,
reinforced coil voltage 24 V DC, in cover IP 00
RUC-M-1052-V6-5230-L relay RUC-M, faston 187 (4,8 x 0,5 mm), for flat insert connectors, with contact gap
 3 mm, with vertical adaptor (V), two normally open contacts, contact material AgCdO,
coil voltage 230 V AC 50/60 Hz, with light indicator (LED diode), in cover IP 00
RUC-M-1051-25-5024 relay RUC-M, with contact gap  6 mm (3+3), for PCB, one normally open contact
(double-break), contact material AgCdO, coil voltage 24 V AC 50/60 Hz, in cover IP 00
147
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RG25
industrial relays of small dimensions
• Power relays of general application • AC and DC coils
• High breaking capacity: AC1 - 10 kVA; AC3 - 6 kVA
• 35 mm rail mount acc. to PN-EN 60715 • High insulation dielectric strength
• Applications: control of electromagnets; systems of heating, cooling,
venti­llation, air conditioning; control with single-phase motors; catering
industry machines and equipment; automation systems; photoelectric
systems; etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC3
DC1
DC13
AC1
AC3
AC1
AC3
50 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 NO
AgCdO
400 V / 440 V
10 V
25 A / 400 V AC
15 A / 400 V AC
25 A / 24 V DC (see Fig. 3)
0,30 A / 120 V 0,15 A / 250 V (R300)
10 mA
40 A
25 A
10 000 VA
6 000 VA
1W
 100 m
600 cycles/hour
600 cycles/hour
3 600 cycles/hour
12 ... 400 V
12 ... 220 V
 0,1 Un
see Tables 1, 2
3,0 VA
1,7 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
20 ms / 20 ms
General data
5 000 V AC
1 500 V AC
5 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: reinforced
 6 mm
 8 mm
> 105 25 A, 400 V AC
see Fig. 2
> 106
26 x 49 x 72 mm
130 g
-25...+85 oC
-25...+85 oC
IP 20
PN-EN 60529
10 g
5 g 10...150 Hz
The data in bold type pertain to the standard versions of the relays.
148
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RG25
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1012
12
85
± 10%
9,6
13,2
1024
24
340
± 10%
19,2
26,4
1048
48
1 350
± 10%
38,4
52,8
1110
110
7 600
± 10%
88,0
121,0
1220
220
30 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
3012
12
17
± 10%
8,4
3024
24
76
± 10%
16,8
13,2
26,4
3110
110
1 600
± 10%
77,0
121,0
3230
230
6 800
± 10%
161,0
253,0
3400
400
18 600
± 10%
280,0
440,0
The data in bold type pertain to the standard versions of the relays.
2 NO
149
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RG25
industrial relays of small dimensions
AC1
N - electrical life
at AC1
150
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RG25
industrial relays of small dimensions
Mounting
Relays RG25 are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Operational position
- screw terminals of coil downwards. Connections: max. cross section of the cables: 2 x 2,5 mm2 (2 x 14 AWG), length
of the cable deinsulation: 9 mm, max. tightening moment for the terminal: 0,7 Nm.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
Contact material
10 - AgCdO
Number and type of contacts
see Tables 1, 2 page 149
22 - 2 NO
Cover protection category
2 - in cover, IP 20 version
Connection mode
8 - screw terminals
Example of ordering code:
RG25-1022-28-3230 relay RG25, screw terminals, two normally open contacts, contact material AgCdO, coil
voltage 230 V AC 50 Hz, in cover IP 20
151
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R20
industrial relays of small dimensions
• High switching capacity up to 30 A
• „Bridge” type contacts which open the circuit with double break
• Flat insert connectors - faston faston 250 (6,3 x 0,8 mm)
• High resistance to interference • High strength of insulation
• Applications: household equipment; air-conditioning and ventilation
systems; audio equipment; control devices; automation systems;
photoelectric systems; etc.
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
AC
AC1
AC1
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
50/60 Hz
Insulation according to PN-EN 60664-1
AC
DC
AC
DC
Insulation rated voltage
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
General data
Operating / release time (typical values)
Electrical life
• resistive AC1
1 200 cycles/hour
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
1 NO, 2 NO
AgSnO2
250 V / 440 V
10 V
1 NO: 30 A / 250 V AC
10 mA 1 NO: 30 A
1 NO: 7 000 VA
0,1 W
 100 m
24 ... 230 V
12 ... 110 V
DC:  0,1 Un
see Tables 1, 2
1,7 VA 24, 48 V 1,9 W
2 NO: 25 A / 250 V AC
10 mA
2 NO: 25 A
2 NO: 6 250 VA
2,5 VA 115, 230 V
250 V AC
4 000 V AC
2 000 V AC
type of insulation: reinforced
type of clearance: full-disconnection
 9 mm
 11 mm
30 ms / 30 ms
105 1Z: 30 A, 250 V AC > 107
67 x 33 x 35 mm
90 g
-25...+75 oC
IP 50
PN-EN 60529
10 g
1,5 mm DA (constant amplitude)
2Z: 25 A, 250 V AC
10...55 Hz
The data in bold type pertain to the standard versions of the relays.
152
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R20
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1012
12
75,8
± 10%
9,0
1024
24
303
± 10%
18,0
13,2
26,4
1110
110
6 400
± 10%
82,5
121,0
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
5024
24
5048
48
5115
115
5230
230
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 20 °C)
± 10%
18,0
26,4
± 10%
36,0
52,8
5 260
± 10%
86,3
126,5
21 000
± 10%
172,5
253,0
338
Connection diagrams (pin side view)
Dimensions
1 NO
1 NO
2 NO
2 NO
153
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R20
industrial relays of small dimensions
Pinout
Mounting
Relays R20 are designed for flat insert connectors
- faston 250 (6,3 x 0,8 mm), relays are direct on panel
mounting with two M4 screws.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Tables 1, 2 page 153
Contact material
30 - AgSnO2
Number and type of contacts
21 - 1 NO
22 - 2 NO
Cover protection category
9 - in cover with mounting flange, IP 50 version
Connection mode
6 - for flat insert connectors - faston 250 (6,3 x 0,8 mm)
Example of ordering code:
R20-3021-96-1012
relay R20, for flat insert connectors - faston 250 (6,3 x 0,8 mm), one normally open contact,
contact material AgSnO2, coil voltage 12 V DC, in cover with mounting flange IP 50
154
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R30
industrial relays of small dimensions
•High switching capacity up to 30 A
•For PCB
• Applications: systems of heating, venti­llation; automotive electric
systems; photoelectric systems; other electric applications
• Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Must operate voltage
Rated power consumption
Insulation according to PN-EN 60664-1
AC
AC1
DC1
AC1
AC3
DC
DC
1 CO, 1 NO
AgSnO2
240 V / 250 V
10 V
1 CO: 20 A / 10 A (NO/NC) / 240 V AC
1 CO: 20 A / 10 A (NO/NC) / 30 V DC
10 mA 1 CO: 20 A / 10 A (NO/NC)
1 CO: 4 800 VA
0,5 HP 240 V AC
0,1 W
 100 m
1 NO:
12 ... 24 V
DC:  0,05 Un
see Table 1
 0,8 Un
1,0 W
Insulation rated voltage
Overvoltage category
Flammability degree
Insulation resistance
Dielectric strength
• between coil and contacts
• contact clearance
250 V AC
II
V-0 UL94
> 100 M
Operating / release time (typical values)
Electrical life
• resistive AC1
1 200 cycles/hour
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• operating
Cover protection category
Shock resistance
Vibration resistance
15 ms / 10 ms
General data
30 A / 240 V AC
30 A / 30 V DC
10 mA
1 NO: 30 A
1 NO: 7 200 VA
0,5 HP 240 V AC
1 NO:
1 500 V AC
1 500 V AC
500 V DC, 60 s
type of insulation: basic
type of clearance: micro-disconnection
105 1 CO: 20 A / 10 A (NO/NC), 240 V AC
> 107
32,2 x 27,5 x 20,5 mm
22 g
-30...+55 oC
IP 64
PN-EN 60529
5g
1,5 mm DA (constant amplitude) 10...55 Hz
1 NO: 30 A, 240 V AC
The data in bold type pertain to the standard versions of the relays.
155
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
R30
industrial relays of small dimensions
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
1012
12
155
± 10%
9,6
18
1024
24
660
± 10%
19,2
36
Connection diagrams (pin side view)
Dimensions
1 CO
1 NO
Pinout (solder side view)
1 CO
1 NO
156
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
R30
industrial relays of small dimensions
Mounting
Relays R30 are designed for direct PCB mounting.
Ordering codes
Cover protection
category
Type
Contact
material
Number and type
of contacts
Connection
mode
Coil code
see Table 1 page 156
Contact material
30 - AgSnO2
Number and type of contacts
11 - 1 CO
21 - 1 NO
Cover protection category
8 - in cover, IP 64 version
Connection mode
5 - for PCB
Examples of ordering codes:
R30-3011-85-1012
R30-3021-85-1024
relay R30, for PCB, one changeover contact, contact material AgSnO2, coil voltage
12 V DC, in cover IP 64
relay R30, for PCB, one normally open contact, contact material AgSnO2, coil voltage
24 V DC, in cover IP 64
157
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RS35, RS50
industrial relays for solar systems
RS35
RS50
•Relays to control power in photovoltaic systems which generate
electric energy
•Max. switching current: 35 A (version RS35); 50 A (version RS50)
•5000 V / 10 mm reinforced insulation • Contact gap: RS35 ≥ 2,2 mm;
RS50 ≥ 1,85 mm • Holding power 0,1 W
•For PCB • DC coils • Reinforced insulation, acc. PN-EN 60730-1
(VDE 0631, part 1); PN-EN 60335-1 (VDE 0700, part 1)
•Recognitions, certifications, directives: RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Power consumption at pickup voltage
Max. continuous dissipation
AC
AC1
DC1
AC1
DC1
AC1
DC
DC
Insulation according to PN-EN 60664-1
2 NO
AgSnO2
250 V / 440 V
10 V
RS35: 35 A / 250 V AC
RS35: 35 A / 24 V DC
10 mA RS35: 35 A
RS35: 8 750 VA
RS35: 90 W 0,3 A / 300 V
1W
 50 m
RS50:
360 cycles/hour
3 600 cycles/hour
5 ... 110 V
DC:  0,05 Un
0,75...2,0 Un see Table 1
0,48 W
0,3 W
1,9 W 20 °C
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Insulation resistance
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
6 000 V 1,2 / 50 µs
III
3
1000 M
Operating / release time (typical values)
Electrical life
• resistive AC1
• AC7a
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
Solder bath temperature
Soldering time
40 ms / 5 ms
General data
48 A / 250 V AC
48 A / 24 V DC
10 mA
RS50: 50 A
RS50: 12 500 VA
RS50: 90 W 0,3 A / 300 V
RS50:
5 000 V AC
2 500 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: full-disconnection
type of insulation: basic
 10 mm
 10 mm
3 x 104 35 A, 250 V AC, 20 °C
104
50 A, 250 V AC, 20 °C
3 x 104 35 A, 250 V AC, 20 °C
3 x 104 50 A, 250 V AC, 20 °C
106
40 x 25 x 49,2 mm
105 g
-40...+105 oC
-40...+85 oC
IP 40
PN-EN 60529
RTI PN-EN 116000-3
10 g
1,5 mm DA (constant amplitude) 10...55 Hz
max. 270 oC
max. 5 s
The data in bold type pertain to the standard versions of the relays.
158
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RS35, RS50
industrial relays for solar systems
Coil data - DC voltage version
Coil code
Rated voltage
V DC
Table 1
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1005
5
50
± 10%
3,75
10
1009
9
170
± 10%
6,75
18
1012
12
300
± 10%
9,00
24
1018
18
675
± 10%
13,50
36
1024
24
1 200
± 10%
18,00
48
1110
110
25 000
± 10%
82,50
220
Dimensions
Connection diagrams (pin side view)
2 NO
Pinout (solder side view)
2 NO
159
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
RS35, RS50
industrial relays for solar systems
Mounting
Relays RS35, RS50 are designed for direct PCB mounting.
Ordering codes
Cover protection
category
Type
R S
Contact
material
—
Number and type
of contacts
Connection
mode
—
Coil code
—
Rated current
35 - 35 A
50 - 50 A
Contact material
see Table 1 page 159
30 - AgSnO2
Number and type of contacts
22 - 2 NO
Cover protection category
2 - in cover, IP 40 version
Connection mode
5 - for PCB
Examples of ordering code:
RS35-3022-25-1005
RS50-3022-25-1110
relay RS35, rated current 35 A, for PCB, two normally open contacts, contact material
AgSnO2, coil voltage 5 V DC, in cover IP 40
relay RS35, rated current 50 A, for PCB, two normally open contacts, contact material
AgSnO2, coil voltage 110 V DC, in cover IP 40
160
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
with plug-in sockets
162
PI85 with socket GZT80 ........... 166
PI84 with socket GZM80 .......... 170
PI85 with socket GZM80 .......... 174
PI84 with socket GZT80 ...........
178
182
PIR4 with socket GZM4 ........... 186
PIR2M with socket GZ2 ........... 190
PIR2 with socket GZM2 ...........
PIR3 with socket GZM3 ...........
in narrow-profile covers
PI6-1P..............................
PI6-1T...............................
193
195
197
PIR6W-1PS-... ................. 200
PIR6WB-1PS-... ............... 203
PI6W-1P ......................... 207
PIR6W-1P-... ....................
Interface relays
The interface relays perform the function of input/output separation in the applications with PLC controllers, and
they are applied in numerous other electric devices as interface and output elements.
The basic features of the relays are:
- quick mounting,
- separation of control circuits from output circuits,
- coil overvoltage suppression devices,
- light indicators of operation,
- number of contacts: from 1 to 4.
The high quality and reliability of the interface relays have been proved by their numerous successful applications.
Miniature and industrial relays of the types: RM699BV, RM84, RM85, R2, R3, R4 are the basis for these relays.
The relays are recognized and certified by:
They meet the requirements of RoHS Directive.
PI84
with socket GZT80
interface relays
RM84 + GZT80
• Interface relay PI84 with socket GZT80 consists of:
electromagnetic relay RM84, grey plug-in socket GZT80, signalling / protecting
module: version LD - M41G or M43G (L - LED green, D - diode, polarization
N: +A1/-A2); version LV - M91G or M93G (L - LED green, V - varistor), retainer
/ retractor clip GZT80-0040 (plastic), white description plate GZT80-0035
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw
•May be linked with interconnection strip type ZGGZ80
•Recognitions, certifications, directives: recognitions RM84, RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
AC
DC
600 cycles/hour
72 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
300 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
(NO/NC)
7 ms / 3 ms
General data
162
DC
2 CO
AgNi
250 V / 440 V
5V
8 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
550 W (single-phase motor)
8 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
15 A
8A
2 000 VA
0,3 W
 100 m
5 000 V AC
1 000 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: basic
 10 mm
 10 mm
> 105 8 A, 250 V AC
see Fig. 2
> 105
0,12 A, 220 V DC
> 3 x 107
75,3 x 15,5 x 67 mm
62 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 20
PN-EN 60529
RM84: RTII
GZT80: RT0
20 g
10 g / 5 g 10...150 Hz
PN-EN 116000-3
The data in bold type pertain to the standard versions of the relays.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI84
with socket GZT80
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
12DC
12
360
± 10%
8,4
24DC
24
1 440
± 10%
16,8
30,6
61,2
110DC
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
12AC
12
100
± 10%
9,6
24AC
24
400
± 10%
19,2
13,2
26,4
120AC
120
10 200
± 10%
96,0
144,0
230AC
230
38 500
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT80-0035
Connection diagrams
(screw terminals side view)
Socket
GZT80
Relay
RM84
Retainer /
retractor clip
GZT80-0040
NC
Module
type M...
COM
NO
COIL
DC version
AC version
Connection of GZT80
8 A, 300 V AC
Inter­­­­con­nection strip type ZGGZ80
163
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI84
with socket GZT80
interface relays
AC1
N - electrical life
at AC1
DC1
In = 8 A
164
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI84
with socket GZT80
interface relays
Mounting
Relays PI84 with socket GZT80 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with one M3 screw. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZT80 may be linked with inter­­­­con­nection strip type ZGGZ80. Strip ZGGZ80 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 8 sockets. Colours of strips:
ZGGZ80-1 grey, ZGGZ80-2 black.
Ordering codes
Type
Coil code
P I 8 4 —
Signalling / protecting module
—
see Tables 1, 2 page 163 Signalling / protecting module
M41G - D + LED green on 6/24 V DC
M43G - D + LED green on 110/230 V DC
M91G - LED green + varistor on 6/24 V AC
M93G - LED green + varistor on 110/230 V AC
Examples of ordering codes:
PI84-12DC-M41G
PI84-24AC-M91G
interface relay PI84, which consists of: relay RM84 with coil 12 V DC, grey plug-in
socket GZT80 (screw terminals), signalling / protecting module M41G (version LD:
L - LED green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT80-0040
(plastic), white description plate GZT80-0035
interface relay PI84, which consists of: relay RM84 with coil 24 V AC 50/60 Hz, grey
plug-in socket GZT80 (screw terminals), signalling / protecting module M91G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT80-0040 (plastic), white
description plate GZT80-0035
165
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI85
with socket GZT80
interface relays
RM85 + GZT80
• Interface relay PI85 with socket GZT80 consists of:
electromagnetic relay RM85, grey plug-in socket GZT80, signalling / protecting
module: version LD - M41G or M43G (L - LED green, D - diode, polarization
N: +A1/-A2); version LV - M91G or M93G (L - LED green, V - varistor), retainer
/ retractor clip GZT80-0040 (plastic), white description plate GZT80-0035
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw
•May be linked with interconnection strip type ZGGZ80
•Recognitions, certifications, directives: recognitions RM85, RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
1 CO
AgNi
250 V / 440 V
5V
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
30 A
16 A
4 000 VA
0,3 W
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
300 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
7 ms / 3 ms
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 0,7 x 105 16 A, 250 V AC
see Fig. 2
> 105 0,12 A, 220 V DC
> 3 x 107
75,3 x 15,5 x 67 mm
62 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 20
PN-EN 60529
RM85: RTII
GZT80: RT0
30 g
10 g 10...150 Hz
PN-EN 116000-3
The data in bold type pertain to the standard versions of the relays.
166
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI85
with socket GZT80
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Coil operating range
V DC
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
12DC
12
360
± 10%
8,4
24DC
24
1 440
± 10%
16,8
30,6
61,2
110DC
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Coil operating range
V AC 50 Hz
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
12AC
12
100
± 10%
9,6
24AC
24
400
± 10%
19,2
13,2
26,4
120AC
120
10 200
± 10%
96,0
144,0
230AC
230
38 500
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT80-0035
Connection diagrams
(screw terminals side view)
Socket
GZT80
Relay
RM85
Retainer /
retractor clip
GZT80-0040
NC
Module
type M...
COM
NO
COIL
DC version
AC version
Connection of GZT80
12 A, 300 V AC
Clamp bridge
Cu wire
min. 1,5 mm2
Inter­­­­con­nection strip type ZGGZ80
Note: Loads above 12 A require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24. Loads up
to 12 A do not require bridging of common terminals
(such bridges may be fixed, however).
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]om.pl
www.relpol.com.pl
167
PI85
with socket GZT80
interface relays
AC1
N - electrical life
at AC1
DC1
In = 16 A
168
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI85
with socket GZT80
interface relays
Mounting
Relays PI85 with socket GZT80 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with one M3 screw. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZT80 may be linked with inter­­­­con­nection strip type ZGGZ80. Strip ZGGZ80 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 8 sockets. Colours of strips:
ZGGZ80-1 grey, ZGGZ80-2 black.
Ordering codes
Type
Coil code
P I 8 5 —
Signalling / protecting module
—
see Tables 1, 2 page 167
Signalling / protecting module
M41G - D + LED green on 6/24 V DC
M43G - D + LED green on 110/230 V DC
M91G - LED green + varistor on 6/24 V AC
M93G - LED green + varistor on 110/230 V AC
Examples of ordering codes:
PI85-12DC-M41G
PI85-24AC-M91G
interface relay PI85, which consists of: relay RM85 with coil 12 V DC, grey plug-in
socket GZT80 (screw terminals), signalling / protecting module M41G (version LD:
L - LED green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT80-0040
(plastic), white description plate GZT80-0035
interface relay PI85, which consists of: relay RM85 with coil 24 V AC 50/60 Hz, grey
plug-in socket GZT80 (screw terminals), signalling / protecting module M91G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT80-0040 (plastic), white
description plate GZT80-0035
169
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI84
with socket GZM80
interface relays
RM84 + GZM80
• Interface relay PI84 with socket GZM80 consists of:
electromagnetic relay RM84, grey plug-in socket GZM80, signalling / protecting
module: version LD - M41G or M43G (L - LED green, D - diode, polarization
N: +A1/-A2); version LV - M91G or M93G (L - LED green, V - varistor), retainer
/ retractor clip GZT80-0040 (plastic), white description plate GZT80-0035
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw
•May be linked with interconnection strip type ZGGZ80
•Recognitions, certifications, directives: recognitions RM84, RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
AC
DC
600 cycles/hour
72 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
300 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
• cos = 0,4
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
(NO/NC)
7 ms / 3 ms
General data
170
DC
2 CO
AgNi
250 V / 440 V
5V
8 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
550 W (single-phase motor)
8 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
15 A
8A
2 000 VA
0,3 W
 100 m
5 000 V AC
1 000 V AC
2 500 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
type of insulation: basic
 10 mm
 10 mm
> 105 8 A, 250 V AC
see Fig. 2
> 105 3 A, 250 V AC
> 105
0,12 A, 220 V DC
> 3 x 107
78,1 x 15,9 x 66,5 mm
59 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 20
PN-EN 60529
RM84: RTII
GZM80: RT0
20 g
10 g / 5 g 10...150 Hz
PN-EN 116000-3
The data in bold type pertain to the standard versions of the relays.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI84
with socket GZM80
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 20 °C)
012DC
12
360
± 10%
8,4
024DC
24
1 440
± 10%
16,8
30,6
61,2
110DC
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC 50 Hz
min. (at 20 °C)
max. (at 20 °C)
012AC
12
100
± 10%
9,6
024AC
24
400
± 10%
19,2
13,2
26,4
120AC
120
10 200
± 10%
96,0
144,0
230AC
230
38 500
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT80-0035
Connection diagrams
(screw terminals side view)
Socket
GZM80
Relay
RM84
Retainer /
retractor clip
GZT80-0040
COM
Module
type M...
NO
NC
COIL
DC version
AC version
Connection of GZM80
8 A, 300 V AC
Inter­­­­con­nection strip type ZGGZ80
171
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI84
with socket GZM80
interface relays
AC1
N - electrical life
at AC1
DC1
In = 8 A
172
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI84
with socket GZM80
interface relays
Mounting
Relays PI84 with socket GZM80 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with one M3 screw. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZM80 may be linked with inter­­­­con­nection strip type ZGGZ80. Strip ZGGZ80 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 8 sockets. Colours of strips:
ZGGZ80-1 grey, ZGGZ80-2 black.
Ordering codes
Type
Coil code
P I 8 4 —
Signalling / protecting module
—
see Tables 1, 2 page 171
Signalling / protecting module
00LD - D + LED green: M41G on 6/24 V DC or M43G on 110/230 V DC
00LV - LED green + varistor: M91G on 6/24 V AC or M93G on 110/230 V AC
Examples of ordering codes:
PI84-012DC-00LD
PI84-230AC-00LV
interface relay PI84, which consists of: relay RM84 with coil 12 V DC, grey plug-in
socket GZM80 (screw terminals), signalling / protecting module M41G (version LD:
L - LED green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT80-0040
(plastic), white description plate GZT80-0035
interface relay PI84, which consists of: relay RM84 with coil 24 V AC 50/60 Hz, grey
plug-in socket GZM80 (screw terminals), signalling / protecting module M91G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT80-0040 (plastic), white
description plate GZT80-0035
173
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI85
with socket GZM80
interface relays
RM85 + GZM80
• Interface relay PI85 with socket GZM80 consists of:
electromagnetic relay RM85, grey plug-in socket GZM80, signalling / protecting
module: version LD - M41G or M43G (L - LED green, D - diode, polarization
N: +A1/-A2); version LV - M91G or M93G (L - LED green, V - varistor), retainer
/ retractor clip GZT80-0040 (plastic), white description plate GZT80-0035
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting with one M3 screw
•May be linked with interconnection strip type ZGGZ80
•Recognitions, certifications, directives: recognitions RM85, RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
1 CO
AgNi
250 V / 440 V
5V
16 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
750 W (single-phase motor)
16 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
30 A
16 A
4 000 VA
0,3 W
 100 m
600 cycles/hour
72 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,15 Un
DC:  0,1 Un
see Tables 1, 2 and Fig. 4, 5
0,75 VA
0,4 ... 0,48 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
Contact - coil distance
• clearance
• creepage
300 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
• DC L/R=40 ms
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
7 ms / 3 ms
General data
5 000 V AC
1 000 V AC
type of insulation: reinforced
type of clearance: micro-disconnection
 10 mm
 10 mm
> 0,7 x 105 16 A, 250 V AC
see Fig. 2
> 105 0,12 A, 220 V DC
> 3 x 107
78,1 x 15,9 x 66,5 mm
59 g
-40...+85 oC
AC: -40...+70 oC DC: -40...+85 oC
IP 20
PN-EN 60529
RM85: RTII
GZM80: RT0
30 g
10 g 10...150 Hz
PN-EN 116000-3
The data in bold type pertain to the standard versions of the relays.
174
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI85
with socket GZM80
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Coil operating range
V DC
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
012DC
12
360
± 10%
8,4
024DC
24
1 440
± 10%
16,8
30,6
61,2
110DC
110
25 200
± 10%
77,0
280,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Coil operating range
V AC 50 Hz
Acceptable
resistance
min. (at 20 °C)
max. (at 20 °C)
012AC
12
100
± 10%
9,6
024AC
24
400
± 10%
19,2
13,2
26,4
120AC
120
10 200
± 10%
96,0
144,0
230AC
230
38 500
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT80-0035
Connection diagrams
(screw terminals side view)
Socket
GZM80
Relay
RM85
Retainer /
retractor clip
GZT80-0040
COM
Module
type M...
NO
NC
COIL
DC version
AC version
Connection of GZM80
12 A, 300 V AC
Clamp bridge
Cu wire
min. 1,5 mm2
Inter­­­­con­nection strip type ZGGZ80
Note: Loads above 12 A require bridging pairs of
terminals: 11 with 21, 12 with 22, 14 with 24. Loads up
to 12 A do not require bridging of common terminals
(such bridges may be fixed, however).
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
175
PI85
with socket GZM80
interface relays
AC1
N - electrical life
at AC1
DC1
In = 16 A
176
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI85
with socket GZM80
interface relays
Mounting
Relays PI85 with socket GZM80 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with one M3 screw. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZM80 may be linked with inter­­­­con­nection strip type ZGGZ80. Strip ZGGZ80 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 8 sockets. Colours of strips:
ZGGZ80-1 grey, ZGGZ80-2 black.
Ordering codes
Type
Coil code
P I 8 5 —
Signalling / protecting module
—
see Tables 1, 2 page 175
Signalling / protecting module
00LD - D + LED green: M41G on 6/24 V DC or M43G on 110/230 V DC
00LV - LED green + varistor: M91G on 6/24 V AC or M93G on 110/230 V AC
Examples of ordering codes:
PI85-012DC-00LD
PI85-230AC-00LV
interface relay PI85, which consists of: relay RM85 with coil 12 V DC, grey plug-in
socket GZM80 (screw terminals), signalling / protecting module M41G (version LD:
L - LED green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT80-0040
(plastic), white description plate GZT80-0035
interface relay PI85, which consists of: relay RM85 with coil 24 V AC 50/60 Hz, grey
plug-in socket GZM80 (screw terminals), signalling / protecting module M91G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT80-0040 (plastic), white
description plate GZT80-0035
177
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR2
with socket GZM2
interface relays
R2 + GZM2
• Interface relay PIR2 with socket GZM2 consists of:
electromagnetic relay R2, grey plug-in socket GZM2, signalling / protecting module: version LD - M41G or M42G or M43G (L - LED green, D - diode, pola­rization
N: +A1/-A2); version LV - M91G or M92G or M93G (L - LED green, V - varistor),
retainer / retractor clip GZT4-0040 (plastic), white description plate GZT4-0035
• 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws
•May be linked with interconnection strip type ZGGZ4 • Recognitions, certifications,
directives: recognitions R2, RoHS, AUCOTEAM GmbH Berlin - railway standards,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO
AgNi
250 V / 440 V
5V
12 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor)
12 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
24 A
12 A
3 000 VA
0,3 W
 100 m
1 200 cycles/hour
18 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,2 Un
see Tables 1,2
50 Hz: 1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
4 000 V 1,2 / 50 µs
III
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
(NO/NC)
Vibration resistance
AC: 10
General data
2 500 V AC
1 500 V AC
2 500 V AC
DC: 
0,1 Un
60 Hz: 1,3
VA
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 2,5 mm
 4 mm
ms / 8 ms
DC: 13
ms / 3 ms
> 105 12 A, 250 V AC
see Fig. 2
> 2 x 107
75 x 27 x 82 mm
97 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 20
PN-EN 60529
R2: RTI
GZM2: RT0
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
The data in bold type pertain to the standard versions of the relays.
178
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR2
with socket GZM2
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
012DC
12
024DC
048DC
110DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
9,6
max. (at 55 °C)
13,2
160
± 10%
24
640
± 10%
19,2
26,4
48
2 600
± 10%
38,4
52,8
110
13 600
± 10%
88,0
121,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
9,6
max. (at 55 °C)
13,2
012AC
12
39,5
± 10%
024AC
24
158
± 10%
19,2
048AC
48
640
± 10%
38,4
52,8
120AC
120
3 770
± 10%
96,0
132,0
230AC
230
16 100
± 10%
184,0
253,0
26,4
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT4-0035
Connection diagrams
(screw terminals side view)
Socket
GZM2
Relay
R2
Retainer /
retractor clip
GZT4-0040
COM
Module
type M...
NO
NC
COIL
DC version
AC version
Inter­­­­con­nection strip type ZGGZ4
179
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR2
with socket GZM2
interface relays
Fig. 1
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Power factor
Breaking capacity [kVA]
Fig. 3
DC current [A]
Max. DC resistive load breaking capacity
N - electrical life
at AC1
DC voltage [V]
180
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Fig. 2
PIR2
with socket GZM2
interface relays
Mounting
Relays PIR2 with socket GZM2 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with two M3 screws. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZM2 may be linked with inter­­­­con­nection strip type ZGGZ4. Strip ZGGZ4 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 6 sockets. Colours of strips:
ZGGZ4-1 grey, ZGGZ4-2 black.
Ordering codes
Type
Coil code
P I R 2 —
Signalling / protecting module
—
see Tables 1, 2 page 179
Signalling / protecting module
00LD - D + LED green: M41G on 6/24 V DC or M42G on 24/60 V DC or M43G on 110/230 V DC
00LV - LED green + varistor: M91G on 6/24 V AC or M92G on 24/60 V AC or M93G on 110/230 V AC
Examples of ordering codes:
PIR2-012DC-00LD
PIR2-230AC-00LV
interface relay PIR2, which consists of: relay R2 with coil 12 V DC, grey plug-in socket
GZM2 (screw terminals), signalling / protecting module M41G (version LD: L - LED
green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT4-0040 (plastic),
white description plate GZT4-0035
interface relay PIR2, which consists of: relay R2 with coil 230 V AC 50/60 Hz, grey
plug-in socket GZM2 (screw terminals), signalling / protecting module M93G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT4-0040 (plastic), white
description plate GZT4-0035
181
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR3
with socket GZM3
interface relays
R3 + GZM3
• Interface relay PIR3 with socket GZM3 consists of:
electromagnetic relay R3, grey plug-in socket GZM3, signalling / protecting module: version LD - M41G or M42G or M43G (L - LED green, D - diode, pola­rization
N: +A1/-A2); version LV - M91G or M92G or M93G (L - LED green, V - varistor),
retainer / retractor clip GZT4-0040 (plastic), white description plate GZT4-0035
• 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws
•May be linked with interconnection strip type ZGGZ4 • Recognitions, certifications,
directives: recognitions R3, RoHS, AUCOTEAM GmbH Berlin - railway standards,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
1 200 cycles/hour
18 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,2 Un
see Tables 1,2
50 Hz: 1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
250 V AC
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
III
3
General data
with AC coils: 2
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
(NO/NC)
Vibration resistance
182
3 CO
AgNi
250 V / 440 V
5V
10 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor)
10 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
20 A
10 A
2 500 VA
0,3 W
 100 m
with DC coils: 4
2 500 V AC
1 500 V AC
2 500 V AC
DC: 
0,1 Un
60 Hz: 1,3
VA
500 V 1,2 / 50 µs
000 V 1,2 / 50 µs
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 2,5 mm
 4 mm
AC: 10
ms / 8 ms
DC: 13
ms / 3 ms
> 105 10 A, 250 V AC
see Fig. 2
> 2 x 107
75 x 27 x 82 mm
107 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 20
PN-EN 60529
R3: RTI
GZM3: RT0
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
The data in bold type pertain to the standard versions of the relays.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR3
with socket GZM3
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
012DC
12
160
± 10%
9,6
13,2
024DC
24
640
± 10%
19,2
26,4
048DC
48
2 600
± 10%
38,4
52,8
110DC
110
13 600
± 10%
88,0
121,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
012AC
12
39,5
± 10%
9,6
13,2
024AC
24
158
± 10%
19,2
26,4
048AC
48
640
± 10%
38,4
52,8
120AC
120
3 770
± 10%
96,0
132,0
230AC
230
16 100
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT4-0035
Connection diagrams
(screw terminals side view)
Socket
GZM3
Relay
R3
Retainer /
retractor clip
GZT4-0040
COM
Module
type M...
NO
NC
COIL
DC version
AC version
Inter­­­­con­nection strip type ZGGZ4
183
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR3
with socket GZM3
interface relays
Fig. 1
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Power factor
N - electrical life
at AC1
Breaking capacity [kVA]
Fig. 3
DC current [A]
Max. DC breaking capacity
A -resistive load DC1
B -inductive load L/R = 40 ms
DC voltage [V]
184
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Fig. 2
PIR3
with socket GZM3
interface relays
Mounting
Relays PIR3 with socket GZM3 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with two M3 screws. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZM3 may be linked with inter­­­­con­nection strip type ZGGZ4. Strip ZGGZ4 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 6 sockets. Colours of strips:
ZGGZ4-1 grey, ZGGZ4-2 black.
Ordering codes
Type
Coil code
P I R 3 —
Signalling / protecting module
—
see Tables 1, 2 page 183
Signalling / protecting module
00LD - D + LED green: M41G on 6/24 V DC or M42G on 24/60 V DC or M43G on 110/230 V DC
00LV - LED green + varistor: M91G on 6/24 V AC or M92G on 24/60 V AC or M93G on 110/230 V AC
Examples of ordering codes:
PIR3-012DC-00LD
PIR3-230AC-00LV
interface relay PIR3, which consists of: relay R3 with coil 12 V DC, grey plug-in socket
GZM3 (screw terminals), signalling / protecting module M41G (version LD: L - LED
green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT4-0040 (plastic),
white description plate GZT4-0035
interface relay PIR3, which consists of: relay R3 with coil 230 V AC 50/60 Hz, grey
plug-in socket GZM3 (screw terminals), signalling / protecting module M93G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT4-0040 (plastic), white
description plate GZT4-0035
185
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR4
with socket GZM4
interface relays
R4 + GZM4
• Interface relay PIR4 with socket GZM4 consists of:
electromagnetic relay R4, grey plug-in socket GZM4, signalling / protecting module: version LD - M41G or M42G or M43G (L - LED green, D - diode, pola­rization
N: +A1/-A2); version LV - M91G or M92G or M93G (L - LED green, V - varistor),
retainer / retractor clip GZT4-0040 (plastic), white description plate GZT4-0035
• 35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws
•May be linked with interconnection strip type ZGGZ4 • Recognitions, certifications,
directives: recognitions R4, RoHS, AUCOTEAM GmbH Berlin - railway standards,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
AC15
AC3
DC1
DC13
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
4 CO
AgNi
250 V / 250 V
5V
6 A / 250 V AC
1,5 A / 120 V 0,75 A / 240 V (C300)
125 W (single-phase motor)
6 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
5 mA
12 A
6A
1 500 VA
0,3 W
 100 m
1 200 cycles/hour
18 000 cycles/hour
12 ... 230 V
12 ... 110 V
AC:  0,2 Un
see Tables 1,2
50 Hz: 1,6 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
II
2
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
(NO/NC)
Vibration resistance
AC: 10
General data
2 500 V AC
1 500 V AC
2 000 V AC
DC: 
0,1 Un
60 Hz: 1,3
VA
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 1,6 mm
 3,2 mm
ms / 8 ms
DC: 13
ms / 3 ms
> 105 6 A, 250 V AC
see Fig. 2
> 2 x 107
75 x 27 x 82 mm
108 g
-40...+85 oC
AC: -40...+55 oC DC: -40...+70 oC
IP 20
PN-EN 60529
R4: RTI
GZM4: RT0
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
The data in bold type pertain to the standard versions of the relays.
186
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR4
with socket GZM4
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
012DC
12
160
± 10%
9,6
13,2
024DC
24
640
± 10%
19,2
26,4
048DC
48
2 600
± 10%
38,4
52,8
110DC
110
13 600
± 10%
88,0
121,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
012AC
12
39,5
± 10%
9,6
13,2
024AC
24
158
± 10%
19,2
26,4
048AC
48
640
± 10%
38,4
52,8
120AC
120
3 770
± 10%
96,0
132,0
230AC
230
16 100
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Description
plate
GZT4-0035
Connection diagrams
(screw terminals side view)
Socket
GZM4
Relay
R4
Retainer /
retractor clip
GZT4-0040
COM
Module
type M...
NO
NC
COIL
DC version
AC version
Inter­­­­con­nection strip type ZGGZ4
187
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR4
with socket GZM4
interface relays
Fig. 1
Electrical life reduction factor
at AC inductive load
Reduction factor
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Power factor
N - electrical life
at AC1
Breaking capacity [kVA]
Fig. 3
DC current [A]
Max. DC breaking capacity
A -resistive load DC1
B -inductive load L/R = 40 ms
DC voltage [V]
188
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Fig. 2
PIR4
with socket GZM4
interface relays
Mounting
Relays PIR4 with socket GZM4 ❶ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with two M3 screws. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
❶Plug-in sockets GZM4 may be linked with inter­­­­con­nection strip type ZGGZ4. Strip ZGGZ4 bridges common input
signals, maximum permissible current is 10 A / 250 V AC. Possibility of connection of 6 sockets. Colours of strips:
ZGGZ4-1 grey, ZGGZ4-2 black.
Ordering codes
Type
Coil code
P I R 4 —
Signalling / protecting module
—
see Tables 1, 2 page 187
Signalling / protecting module
00LD - D + LED green: M41G on 6/24 V DC or M42G on 24/60 V DC or M43G on 110/230 V DC
00LV - LED green + varistor: M91G on 6/24 V AC or M92G on 24/60 V AC or M93G on 110/230 V AC
Examples of ordering codes:
PIR4-012DC-00LD
PIR4-230AC-00LV
interface relay PIR4, which consists of: relay R4 with coil 12 V DC, grey plug-in socket
GZM4 (screw terminals), signalling / protecting module M41G (version LD: L - LED
green, D - diode, polarization N: +A1/-A2), retainer / retractor clip GZT4-0040 (plastic),
white description plate GZT4-0035
interface relay PIR4, which consists of: relay R4 with coil 230 V AC 50/60 Hz, grey
plug-in socket GZM4 (screw terminals), signalling / protecting module M93G (version
LV: L - LED green, V - varistor), retainer / retractor clip GZT4-0040 (plastic), white
description plate GZT4-0035
189
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR2M
with socket GZ2
interface relays
R2M + GZ2
•Interface relay PIR2M with socket GZ2 consists of:
electromagnetic relay R2M, black plug-in socket GZ2,
spring wire clip GZ2 1060, two spring clamps GZ2 1111
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with two M3 screws
•Recognitions, certifications, directives: recognitions R2M, RoHS,
Contact data
Number and type of contacts
Contact material
Rated / max. switching voltage
Min. switching voltage
Rated load (capacity)
Min. switching current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Coil data
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
AC
AC1
DC1
AC1
AC1
50/60 Hz AC
Insulation according to PN-EN 60664-1
DC
AC
DC
2 CO
AgNi
250 V / 250 V
5V
5 A / 250 V AC
5 A / 24 V DC (see Fig. 3)
5 mA
5A
1 250 VA
0,3 W
 100 m
1 200 cycles/hour
36 000 cycles/hour
6 ... 230 V
6 ... 110 V
 0,05 Un
see Tables 1, 2
1,2 VA
0,9 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength
• between coil and contacts
• contact clearance
• pole - pole
Contact - coil distance
• clearance
• creepage
250 V AC
2 500 V 1,2 / 50 µs
II
3
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Shock resistance
Vibration resistance
AC: 8
General data
2 000 V AC
1 000 V AC
2 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 3 mm
 4 mm
ms / 7 ms DC: 10
ms / 3 ms
 2 x 105 5 A, 250 V AC
see Fig. 2
 107
65,2 x 20 x 60,6 mm
45 g
-40...+70 oC
-40...+55 oC
IP 00
PN-EN 60529
10 g
5 g 10...150 Hz
The data in bold type pertain to the standard versions of the relays.
190
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR2M
with socket GZ2
interface relays
Coil data - DC voltage version
Coil code
Table 1
Coil resistance
at 20 °C

Rated voltage
V DC
Acceptable
resistance
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
006DC
6
47
± 10%
4,8
6,6
012DC
12
188
± 10%
9,6
13,2
024DC
24
750
± 10%
19,2
26,4
048DC
48
2 660
± 10%
38,4
52,8
110DC
110
13 480
± 10%
88,0
121,0
The data in bold type pertain to the standard versions of the relays.
Coil data - AC 50/60 Hz voltage version
Coil code
Rated voltage
V AC
Table 2
Coil resistance
at 20 °C

Acceptable
resistance
Coil operating range
V AC
min. (at 20 °C)
max. (at 55 °C)
006AC
6
16
± 10%
4,8
6,6
012AC
12
68
± 10%
9,6
13,2
024AC
24
270
± 10%
19,2
26,4
115AC
115
5 990
± 10%
92,0
126,0
230AC
230
21 470
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions
Relay
R2M
Socket
GZ2
NO
NC
COIL
COM
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Fig. 1
N
Spring wire
clip
GZ2 1060
Number of cycles
Two
spring clamps
GZ2 1111
Connection diagrams
(screw terminals side view)
Breaking capacity [kVA]
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
191
PIR2M
with socket GZ2
interface relays
Fig. 2
Max. DC resistive load breaking capacity
Fig. 3
Reduction factor
DC current [A]
Electrical life reduction factor
at AC inductive load
Power factor
N - electrical life
at AC1
DC voltage [V]
Mounting
Relays PIR2M with socket GZ2 are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715
or on panel mounting with two M3 screws. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,7 Nm.
Ordering codes
Type
Coil code
P I R 2 M —
Contact material
—
see Tables 1, 2 page 191
Contact material
20 - AgNi
Examples of ordering codes:
PIR2M-012DC-20
PIR2M-230AC-20
interface relay PIR2M, which consists of: relay R2M with coil 12 V DC (contact material
AgNi), black socket GZ2 (screw terminals), spring wire clip GZ2 1060, two spring clamps
GZ2 1111
interface relay PIR2M, which consists of: relay R2M with coil 230 V AC 50/60 Hz
(contact material AgNi), black socket GZ2 (screw terminals), spring wire clip GZ2 1060,
two spring clamps GZ2 1111
192
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI6-1P
interface relays
• Width 6,2 mm
• Interface relay PI6-1P - with 1 CO contact output
• 35 mm rail mount acc. to PN-EN 60715
• May be linked with interconnection strip type ZG20
• Equipped in LED green
•Version for long control lines, with anti-interference filter
(PI6-1P-230VAC/DC-10 ❷)
• Recognitions, certifications, directives: : RoHS,
Contact data
Number and type of contacts
Contact material
Max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC / DC
AC1
DC1
AC1
AC1
Input circuit
1 CO
AgSnO2
400 V AC / 250 V DC
10 V
6 A / 250 V AC 6 A / 24 V DC; 0,15 A / 250 V DC
100 mA 10 A 20 ms
6 A
1 500 VA
1 W
 100 m 100 mA, 24 V AgSnO2/Au 3 µm ❶
30 V AC / 36 V DC ❶
5V
0,05 A / 30 V AC ❶
0,05 A / 36 V DC ❶
10 mA
0,1 A 20 ms ❶
0,05 A ❶
1,2 VA ❶
0,05 W
 30 m 10 mA, 5 V
360 cycles/hour
72 000 cycles/hour
Rated voltage
DC
AC: 50/60 Hz AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Input polarization current
Rated power consumption
DC
AC/DC
Max. length of control line
12 ... 36 V
24 ... 230 V AC:  0,2 Un
AC:  0,35 Un ❷
see Table 1
AC and DC:  0,8 Un AC: 0,6...0,85 Un ❷
AC: 8 mA < Ip < 10 mA 230 V AC ❷
0,3 ... 0,7 W
0,3 ... 1,6 VA / 0,3 ... 1,6 W
 300 m AC control voltage ❷
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • input - output
• input - output
• mass - input, output
• contact clearance
Input - output distance
• clearance / creepage
400 V AC
4 000 V 1,2 / 50 µs
III
3
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
6 000 V 1,2 / 50 µs
2 500 V AC
50/60 Hz, 1 min.
1 000 V AC
50/60 Hz, 1 min., type of clearance: micro-disconnection
Operating time (typical value)
Release time (typical value)
Electrical life
• resistive AC1
• cos  = 0,4
• resistive DC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
7 ms DC: 6 ms
15 ms
DC: 10 ms
> 0,6 x 105
6 A, 250 V AC
> 2 x 105 2 A, 250 V AC
105
6 A, 30 V DC
> 2 x 107
93,8 x 6,2 x 80 mm
40 g
-40...+70 oC
-40...+55 oC
-40...+60 oC 12, 24 V DC
o
-40...+40 C 230 V AC ❷ -40...+50 oC 230 V DC ❷
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
10 g / 5 g 10...500 Hz
Insulation according to PN-EN 60664-1
General data
Protection category
Environmental protection
Shock / vibration resistance
DC: 
0,1 Un DC: 
0,8 Un ❷
 6 mm /  8 mm
AC:
AC:
The data in bold type pertain to the standard versions of the relays.
❶For gold-plated contacts - when the maximum values given have been
exceeded, the gold layer is destroyed. Then, the advantages of gold-plating disappear and the values are as for AgSnO2 contacts (see beside), and
electrical life of these contacts may be shorter than of normal contacts. ❷Refers version for long control lines (max. 300 m) PI6-1P-230VAC/DC-10
- relay with integrated anti-interference filter (desigend on the basis of appropriately selected elements R and C, and Zener diode), resistant to
occur­rence of induced voltages in long distances of control wires.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
193
PI6-1P
interface relays
Table 1
Input data
Interface relay code
Rated input
voltage Un
Power
of input circuit
Input - voltage range
V
min. (at 20 °C)
max. (at 55 °C)
PI6-1P-12VDC 12 V DC
0,3 W
9,6
14,4
PI6-1P-24VDC 24 V DC
0,4 W
19,2
28,0
PI6-1P-36VDC 36 V DC
0,7 W
28,8
40,0
PI6-1P-24VAC/DC 24 V AC/DC
0,5 VA / 0,5 W
19,2
26,4
PI6-1P-42VAC/DC 42 V AC/DC
0,3 VA / 0,3 W
33,6
50,0
115 V AC/DC
0,8 VA / 0,8 W
92,0
130,0
PI6-1P-230VAC/DC 230 V AC/DC
0,8 VA / 0,8 W
184,0
253,0
PI6-1P-230VAC/DC-10 ❷
230 V AC/DC
1,6 VA / 1,6 W
196,0
253,0
PI6-1P-12VDC-01 ❶
12 V DC
0,3 W
9,6
14,4
PI6-1P-24VDC-01 ❶
24 V DC
0,4 W
19,2
28,0
PI6-1P-36VDC-01 ❶
36 V DC
0,7 W
28,8
40,0
PI6-1P-24VAC/DC-01 ❶
24 V AC/DC
0,5 VA / 0,5 W
19,2
26,4
PI6-1P-230VAC/DC-01 ❶
230 V AC/DC
0,8 VA / 0,8 W
184,0
253,0
PI6-1P-115VAC/DC
The data in bold type pertain to the standard versions of the relays.
❶Version with gold-plated contacts. ❷Version for long control lines (max. 300 m), with anti-interference filter.
Connection diagrams
Dimensions
PI6-1P-12VDC, PI6-1P-12VDC-01
PI6-1P-24VDC, PI6-1P-24VDC-01
PI6-1P-36VDC, PI6-1P-36VDC-01
PI6-1P-24VAC/DC, PI6-1P-24VAC/DC-01
PI6-1P-42VAC/DC
Mounting
PI6-1P-115VAC/DC
PI6-1P-230VAC/DC, PI6-1P-230VAC/DC-01
PI6-1P-230VAC/DC-10
Relays PI6-1P are designed for direct mounting on 35 mm
rail mount acc. to PN-EN 60715. Connections: max. cross
section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 /
2 x 16 AWG), length of the cable deinsulation: 8 mm, max.
tightening moment for the terminal: 0,3 Nm.
PI6-1P may be linked with inter­­­­con­nection strip type
ZG20. Strip ZG20 bridges common input or output signals,
maximum permissible current is 36 A / 250 V AC. Colours
of strips: ZG20-1 red, ZG20-2 black, ZG20-3 blue (see
page 196).
Ordering codes
Ordering codes PI6-1P are specified in Table 1, „Interface
relay code” column.
194
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI6-1T
interface relays
• Width 6,2 mm
• Interface relay PI6-1T - with triac output
• 35 mm rail mount acc. to PN-EN 60715
• May be linked with interconnection strip type ZG20
• Equipped in LED green
• Recognitions, certifications, directives: : RoHS,
Output circuit - Triac
Number and type of outputs
Rated / max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. non-repeat surge current
Rated current
I2t for fusing
dI/dt
dV/dt
AC
AC
AC1
Input circuit
Rated voltage
Turn-off voltage
Rated power consumption
DC
AC: 50/60 Hz AC/DC
DC
AC/DC
AC/DC
Insulation according to PN-EN 60664-1
Insulation rated voltage
Insulation pollution degree
Dielectric strength
General data
Operating time
Release time
Dimensions (L x W x H)
Weight
Ambient temperature
Protection category
Environmental protection
Shock resistance
Vibration resistance
• input - output
• storage
• operating
1 NO
400 V / 440 V
20 V
1,2 A / 400 V AC
10 mA
30 A t=20 ms
1,2 A
5,1 A2s t=1-10 ms
50 A/µs
40 V/µs
5...32 V
24 ... 230 V
AC:  0,2 Un DC:  0,1 Un
0,3 W 5...32 V DC at 24 V
0,3 VA / 0,3 W 24 V AC/DC
1,6 VA / 1,6 W 230 V AC/DC
600 V AC
2
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
10 ms max. (zero turn-on)
10 ms max.
93,8 x 6,2 x 80 mm
40 g
-40...+70 oC
-40...+55 oC
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
10 g
5 g
10...500 Hz
EUROPRODUCT 2003
for interfece relays PI6
Gold medal
AUTOMATICON 2004
for interfece relays PI6
195
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PI6-1T
interface relays
Table 1
Input data
Interface relay code
Rated input voltage
Un
Power
of input circuit
PI6-1T-5...32VDC 5...32 V DC
0,3 W at 24 V
PI6-1T-24VAC/DC 24 V AC/DC
0,3 VA / 0,3 W
PI6-1T-230VAC/DC
230 V AC/DC
1,6 VA / 1,6 W
Connection diagrams
Dimensions
PI6-1T-5...32VDC
PI6-1T-24VAC/DC
PI6-1T-230VAC/DC
Ordering codes
Ordering codes PI6-1T are specified in Table 1, „Interface
relay code” column.
Inter­­­­con­nection strip type ZG20
Mounting
Relays PI6-1T are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Connections:
max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the cable deinsulation:
8 mm, max. tightening moment for the terminal: 0,3 Nm.
PI6-1T may be linked with inter­­­­con­nection strip type ZG20. Strip ZG20 bridges common input or output signals,
maximum permissible current is 36 A / 250 V AC. Colours of strips: ZG20-1 red, ZG20-2 black, ZG20-3 blue.
ZG20
Interconnection strip ZG20:
bridging of common
input or output signals.
196
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR6W-1P-...
interface relays
RM699BV + PI6W-1P-…
•Width 6,2 mm • Interface relay PIR6W-1P-... consists of: screw terminals
socket, with electronic PI6W-1P-..., miniature operational relay - electromagnetic RM699BV ❶
•35 mm rail mount acc. to PN-EN 60715 • May be linked with interconnection strip type ZG20 • Equipped in LED green • Version for long control
lines, with anti-interference filter (PIR6W-1P-230VAC/DC-10 ❸)
• Accessories: description plates PI6W-1246
• Recognitions, certifications, directives: RoHS,
Output circuit (RM699BV) - contact data ❶
Number and type of contacts
Contact material
Max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC / DC
AC1
DC1
AC1
AC1
Input circuit
1 CO
AgSnO2
400 V AC / 250 V DC
10 V
6 A / 250 V AC 6 A / 24 V DC; 0,15 A / 250 V DC
100 mA 10 A 20 ms
6 A
1 500 VA
1 W
 100 m 100 mA, 24 V AgSnO2/Au 3 µm ❷
30 V AC / 36 V DC ❷
5V
0,05 A / 30 V AC ❷
0,05 A / 36 V DC ❷
10 mA
0,1 A 20 ms ❷
0,05 A ❷
1,2 VA ❷
0,05 W
 30 m 10 mA, 5 V
360 cycles/hour
72 000 cycles/hour
Rated voltage
DC
AC: 50/60 Hz AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Rated power consumption
DC
AC/DC
Max. length of control line
12 ... 36 V
24 ... 230 V AC:  0,2 Un
AC:  0,35 Un ❸
see Table 1
AC and DC:  0,8 Un AC: 0,6...0,85 Un ❸
0,3 W
0,3 ... 2,1 VA / 0,3 ... 1,0 W
 300 m AC control voltage ❸
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • input - output
• input - output
• mass - input, output
• contact clearance
Input - output distance
• clearance / creepage
250 V AC
4 000 V 1,2 / 50 µs
III
3
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
6 000 V 1,2 / 50 µs
2 500 V AC
50/60 Hz, 1 min.
1 000 V AC
50/60 Hz, 1 min., type of clearance: micro-disconnection
Insulation according to PN-EN 60664-1
General data
DC: 
0,1 Un
DC: 
0,8 Un ❸
 6 mm /  8 mm
Operating time (typical value)
AC: 11 ms DC: 8 ms
AC/DC: 20 ms at U=0,85 Un ❸
Release time (typical value)
AC: 15 ms DC: 10 ms AC/DC: 18 ms ❸
Electrical life
• resistive AC1
> 0,6 x 105
6 A, 250 V AC, 360 cycles/hour
• cos  = 0,4
> 2 x 105 2 A, 250 V AC
Mechanical life (cycles)
> 2 x 107
Dimensions (L x W x H) / Weight
98,5 x 6,2 x 85,5 mm / 45 g
-40...+70 oC
Ambient temperature
• storage
-40...+60 oC 12, 24 V DC
• operating
-40...+50 oC 230 V AC/DC ❹
-40...+55 oC other voltages
IP 20
PN-EN 60529
Protection category
Environmental protection
RTI
PN-EN 116000-3
Shock resistance
10 g
Vibration resistance
5 g
10...500 Hz
The data in bold type pertain to the standard versions of the relays. ❶Characteristics of the contact capacity of relays PIR6W-1P-... with RM699BV
- see page 39. ❷For gold-plated contacts - when the maximum values given have been exceeded, the gold layer is destroyed. Then, the advantages
of gold-plating disappear and the values are as for AgSnO2 contacts (see beside), and electrical life of these contacts may be shorter than of normal
contacts. ❸Refers version for long control lines (max. 300 m) PIR6W-1P-230VAC/DC-10 - relay which includes the socket PI6W-1P-230VAC/DC-10
with integrated anti-interference filter (desigend on the basis of appropriately selected elements R and C, and Zener diode), resistant to occurrence
❹ For versions 230VAC/DC and
of induced voltages in long distances of control wires, and operational miniature relay RM699BV-3011-85-1060.
230VAC/DC-10: the distance of min. 5 mm between the mounting relays.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
197
PIR6W-1P-...
interface relays
Table 1
Input data
Interface relay code
Input - voltage range
V
min.
max.
PIR6W-1P-12VDC 9,6
14,4
PIR6W-1P-24VDC 19,2
28,0
PIR6W-1P-36VDC 28,8
40,0
PIR6W-1P-24VAC/DC 19,2
26,4
PIR6W-1P-42VAC/DC
33,6
50,0
PIR6W-1P-115VAC/DC 92,0
130,0
PIR6W-1P-230VAC/DC ❹
184,0253,0
PIR6W-1P-230VAC/DC-10 ❸ ❹
196,0 ❺
253,0
9,6
14,4
PIR6W-1P-12VDC-01 ❷
PIR6W-1P-24VDC-01 ❷
Connection diagrams
PIR6W-1P-12VDC, PIR6W-1P-12VDC-01
PIR6W-1P-24VDC, PIR6W-1P-24VDC-01
PIR6W-1P-36VDC, PIR6W-1P-36VDC-01
PIR6W-1P-24VAC/DC, PIR6W-1P-24VAC/DC-01
PIR6W-1P-42VAC/DC, PIR6W-1P-42VAC/DC-01
19,228,0
PIR6W-1P-36VDC-01 ❷
28,8
40,0
PIR6W-1P-24VAC/DC-01 ❷
19,2
26,4
PIR6W-1P-42VAC/DC-01 ❷
33,6
50,0
PIR6W-1P-115VAC/DC-01 ❷
92,0
130,0
PIR6W-1P-230VAC/DC-01 ❷ ❹184,0
PIR6W-1P-115VAC/DC, PIR6W-1P-115VAC/DC-01
PIR6W-1P-230VAC/DC, PIR6W-1P-230VAC/DC-01
253,0
The data in bold type pertain to the standard versions of the relays.
❷Version with gold-plated contacts.
❸Version for long control lines (max. 300 m), with anti-interference filter.
❹ For versions 230VAC/DC and 230VAC/DC-10: the distance of min.
5 mm between the mounting relays.
❺ 196,0 V at supply voltage AC; 184,0 V at supply voltage DC
PIR6W-1P-230VAC/DC-10
Ordering codes
Ordering codes PIR6W-1P-... are specified in Tables 1, 2,
„Interface relay code” column.
Dimensions
Inter­­­­con­nection strip type ZG20
Location of the
description plate
Description plate PI6W-1246
198
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR6W-1P-...
interface relays
Mounting
Relays PIR6W-1P-... ❹ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Connections:
max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the cable deinsulation:
9 mm, max. tightening moment for the terminal: 0,3 Nm.
Interface relay PIR6W-1P-... consists of: screw terminals socket, with electronic PI6W-1P-..., miniature operational
relay - electromagnetic RM699BV.
PIR6W-1P-... may be linked with inter­­­­con­nection strip type ZG20. Strip ZG20 bridges common input or output
signals, maximum permissible current is 36 A / 250 V AC. Colours of strips: ZG20-1 red, ZG20-2 black, ZG20-3
blue. Description plates of PI6W-1246 type are offered for PIR6W-1P-... relays; they are delivered with the relays,
not mounted.
❹ For versions 230VAC/DC and 230VAC/DC-10: the distance of min. 5 mm between the mounting relays.
PI6W-1P-...
ZG20
RM699BV
Green LED:
signalling the operation
status of the relay.
Interconnection strip ZG20:
bridging of common
input or output signals.
PI6W-1246
Movable ejector: protection
and easy replacement
of the operational relay.
Table 2
Table of codes
Interface relay code
Rated
input
voltage
Un ❻
Power
of input circuit
Socket code
Operational relay
code
Rated
voltage of
operational
relay
Us ❻
PIR6W-1P-12VDC 12 V DC
0,3 W
PI6W-1P-12VDC RM699BV-3011-85-1012
12 V DC
PIR6W-1P-24VDC 24 V DC
0,3 W
PI6W-1P-24VDC RM699BV-3011-85-1024 24 V DC
PIR6W-1P-36VDC 36 V DC
0,3 W
PI6W-1P-36VDC RM699BV-3011-85-1024 24 V DC
PIR6W-1P-24VAC/DC 24 V AC/DC
0,3 VA / 0,3 W
PI6W-1P-24VAC/DC RM699BV-3011-85-1024
24 V DC
PIR6W-1P-42VAC/DC
42 V AC/DC
0,4 VA / 0,4 W
PI6W-1P-42VAC/DC
RM699BV-3011-85-1024 24 V DC
PIR6W-1P-115VAC/DC 115 V AC/DC
0,9 VA / 0,9 W
PI6W-1P-115VAC/DC RM699BV-3011-85-1024
24 V DC
PIR6W-1P-230VAC/DC ❹
230 V AC/DC
0,8 VA / 0,8 W
PI6W-1P-230VAC/DC RM699BV-3011-85-1060
60 V DC
PIR6W-1P-230VAC/DC-10 ❸ ❹
230 V AC/DC
2,1 VA / 1,0 W
PI6W-1P-230VAC/DC-10
RM699BV-3011-85-1060
60 V DC
PIR6W-1P-12VDC-01 ❷
12 V DC
0,3 W
PI6W-1P-12VDC RM699BV-3211-85-1012
12 V DC
PIR6W-1P-24VDC-01 ❷
24 V DC
0,3 W
PI6W-1P-24VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1P-36VDC-01 ❷
36 V DC
0,3 W
PI6W-1P-36VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1P-24VAC/DC-01 ❷
24 V AC/DC
0,3 VA / 0,3 W
PI6W-1P-24VAC/DC RM699BV-3211-85-1024
24 V DC
PIR6W-1P-42VAC/DC-01 ❷
42 V AC/DC
0,4 VA / 0,4 W
PI6W-1P-42VAC/DC RM699BV-3211-85-1024 24 V DC
PIR6W-1P-115VAC/DC-01 ❷
115 V AC/DC
0,9 VA / 0,9 W
PI6W-1P-115VAC/DC RM699BV-3211-85-1024
24 V DC
PIR6W-1P-230VAC/DC-01 ❷ ❹
230 V AC/DC
0,8 VA / 0,8 W
PI6W-1P-230VAC/DC
RM699BV-3211-85-1060
60 V DC
The data in bold type pertain to the standard versions of the relays.
❷ Version with gold-plated contacts.
❸ Version for long control lines (max. 300 m),
❹ For versions 230VAC/DC and 230VAC/DC-10: the distance of min. 5 mm between the mounting relays. ❻It shall be remarked
with anti-interference filter.
that rated input voltage of the operational relay Us not always complies with the rated input voltage Un (which is important on ordering operational relays for sockets).
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
199
PIR6W-1PS-...
interface relays
RM699BV + PI6W-1PS-…
RSR30 + PI6W-1PS-…
•Width 6,2 mm • Interface relay PIR6W-1PS-... consists of: screw
terminals universal socket, with electronic PI6W-1PS-..., miniature
operational relay - electromagnetic RM699BV or solid state RSR30 ❶
•35 mm rail mount acc. to PN-EN 60715 • May be linked with interconnection strip type ZG20 • Equipped in LED green
• Accessories: description plates PI6W-1246
• Recognitions, certifications, directives: RoHS,
Output circuit (RM699BV) - contact data ❶
Number and type of contacts (code of output)
Contact material
Max. switching voltage
Min. switching voltage
AC / DC
Rated load AC1
DC1
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
AC1
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
AC1
• no load
Output circuit (RSR30) - output data ❶
1 CO (R) ❸
AgSnO2
400 V AC / 250 V DC
10 V
6 A / 250 V AC 6 A / 24 V DC; 0,15 A / 250 V DC
100 mA 10 A 20 ms
6 A
1 500 VA
1 W
 100 m 100 mA, 24 V 1 CO (R-01) ❸
AgSnO2/Au 3 µm ❷
30 V AC / 36 V DC ❷
5V
0,05 A / 30 V AC ❷
0,05 A / 36 V DC ❷
10 mA
0,1 A 20 ms ❷
0,05 A ❷
1,2 VA ❷
0,05 W
 30 m 10 mA, 5 V
360 cycles/hour
72 000 cycles/hour
Triac (T) ❸
Transistor (C) ❸ max. 2 A
max. 1 A
1 NO
1 NO
Number and type of outputs
Rated voltage
240 V AC
48 V DC
Max. output voltage
280 V AC 60 V DC
Min. output voltage
12 V AC
1,5 V DC
1 A
Rated continuous output current AC1
DC1
1 A
Min. making capacity current
50 mA 1 mA
Max. off-state leakage current (rest condition)
1,5 mA
1 mA
Max. on-state voltage drop on the connection (operating state) 1,2 V
0,4 V
Operating switching frequency
10 Hz
Type of output (code of output)
Input circuit
2A
1 mA
1 mA
0,24 V
10 Hz
Rated voltage
DC
AC: 50/60 Hz AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Rated power consumption
DC
AC/DC
6 ... 60 V
24 ... 230 V AC:  0,2 Un
DC:  0,1 Un
0,8...1,2 Un 0,85...1,2 Un 6 V DC
 0,8 Un  0,85 Un 6 V DC
0,2 ... 0,5 W
0,5 ... 1,2 VA / 0,4 ... 1,2 W
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • input - output
• input - output
• mass - input, output
• contact clearance
250 V AC
4 000 V 1,2 / 50 µs
III
3
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
6 000 V 1,2 / 50 µs
2 500 V AC
50/60 Hz, 1 min.
1 000 V AC
50/60 Hz, 1 min., output R and R-01,
Insulation according to PN-EN 60664-1
Input - output distance
• clearance / creepage
Mass - input, output distance
• clearance / creepage
200
Transistor (O) ❸
max. 2 A
1 NO
24 V DC
32 V DC
1,5 V DC
type of clearance: micro-disconnection
 6 mm /  8 mm
 3 mm / 3,6 mm
The data in bold type pertain to the standard versions of the relays.
❶ Characteristics of the contact capacity of relays PIR6W-1PS-... with
❷ For gold-plated contacts
RM699BV - see page 39; PIR6W-1PS-... with RSR30 - see catalogue ”Solid state relays” and www.relpol.com.pl
- when the maximum values given have been exceeded, the gold layer is destroyed. Then, the advantages of gold-plating disappear and the values
are as for AgSnO2 contacts (see beside), and electrical life of these contacts may be shorter than of normal contacts. ❸Type of outputs: R - contacts
AgSnO2; R01 - contacts AgSnO2/Au 3 µm; T - triac; C - transistor; O - transistor.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR6W-1PS-...
interface relays
General data
Operating time (typical value)
ms
µs
PIR6W-1PS-...-C/-O: DC: 50 µs
PIR6W-1PS-...-R/-R01: DC: 10 ms
Release time (typical value)
PIR6W-1PS-...-R/-R01: DC: 8
AC/DC:
PIR6W-1PS-...-T:
AC/DC:
PIR6W-1PS-...-T:
DC: 100
DC: 1/2 cycle + 1 ms
µs
> 0,5 x 105 6 A, 250 V AC
PIR6W-1PS-...-R/-R01: > 107
98,5 x 6,2 x 85,5 mm
45 g
PIR6W-1PS-...-R/-R01/-T: -40...+70 oC ...-C/-O: -25...+70 oC
PIR6W-1PS-...-R/-R01:
-40...+55 oC ...-T/-C/-O: -20...+55 oC
PIR6W-1PS-230VAC/DC-R/-R01:-40...+50 oC ...-C/-O: -20...+50 oC
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
10 g
5 g 10...500 Hz
PIR6W-1PS-...-C/-O: Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
PIR6W-1PS-...-R:
Protection category
Environmental protection
Shock resistance
Vibration resistance
Connection diagrams
DC: 600
20 ms
10 ms
AC/DC: 10 ms
AC/DC: 25 ms
AC/DC: 30 ms
AC/DC: 20 ms
Dimensions
PIR6W-1PS-...-R, PIR6W-1PS-...-R01
PIR6W-1PS-...-T, PIR6W-1PS-...-C, PIR6W-1PS-...-O
Ordering codes
Ordering codes PIR6W-1PS-... are specified in Table 1,
„Interface relay code” column.
Mounting
Relays PIR6W-1PS-... are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Connections:
max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the cable deinsulation:
9 mm, max. tightening moment for the terminal: 0,3 Nm.
Interface relay PIR6W-1PS-... consists of: screw terminals universal socket, with electronic PI6W-1PS-..., miniature
operational relay - electromagnetic RM699BV or solid state RSR30 ❸.
PIR6W-1PS-... may be linked with inter­­­­con­nection strip type ZG20 (see pages 198-199). Description plates of
PI6W-1246 type are offered for PIR6W-1PS-... relays (see pages 198-199).
PI6W-1PS-...
RM699BV
RSR30
ZG20
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI6W-1246
www.relpol.com.pl
201
PIR6W-1PS-...
interface relays
Table 1
Table of codes
Interface relay code
Rated
input
voltage
Un ❹
Power
of input circuit
Socket code
Operational relay
code
Rated
voltage of
operational
relay
Us ❹
PIR6W-1PS-6VDC-R
6 V DC
0,3 W
PI6W-1PS-6VDC
RM699BV-3011-85-1005 5 V DC
PIR6W-1PS-12VDC-R
12 V DC
0,2 W
PI6W-1PS-12/24VDC
RM699BV-3011-85-1012
12 V DC
PIR6W-1PS-24VDC-R
24 V DC
0,3 W
PI6W-1PS-12/24VDC
RM699BV-3011-85-1024 24 V DC
PIR6W-1PS-36VDC-R
36 V DC
0,3 W
PI6W-1PS-36VDC
RM699BV-3011-85-1024 24 V DC
PIR6W-1PS-48VDC-R
48 V DC
0,4 W
PI6W-1PS-48VDC
RM699BV-3011-85-1024 24 V DC
PIR6W-1PS-60VDC-R
60 V DC
0,5 W
PI6W-1PS-60VDC
RM699BV-3011-85-1024 24 V DC
PIR6W-1PS-24VAC/DC-R
24 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-24VAC/DC
RM699BV-3011-85-1012
12 V DC
PIR6W-1PS-42VAC/DC-R
42 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-42VAC/DC
RM699BV-3011-85-1024 24 V DC
PIR6W-1PS-115VAC/DC-R
115 V AC/DC
1,2 VA / 1,2 W
PI6W-1PS-115VAC/DC
RM699BV-3011-85-1024
24 V DC
PIR6W-1PS-230VAC/DC-R
230 V AC/DC
1,2 VA / 1,2 W
PI6W-1PS-230VAC/DC
RM699BV-3011-85-1048
48 V DC
PIR6W-1PS-6VDC-R01 ❷
6 V DC
0,3 W
PI6W-1PS-6VDC
RM699BV-3211-85-1005 5 V DC
PIR6W-1PS-12VDC-R01 ❷
12 V DC
0,2 W
PI6W-1PS-12/24VDC
RM699BV-3211-85-1012
12 V DC
PIR6W-1PS-24VDC-R01 ❷
24 V DC
0,3 W
PI6W-1PS-12/24VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1PS-36VDC-R01 ❷
36 V DC
0,3 W
PI6W-1PS-36VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1PS-48VDC-R01 ❷
48 V DC
0,4 W
PI6W-1PS-48VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1PS-60VDC-R01 ❷
60 V DC
0,5 W
PI6W-1PS-60VDC
RM699BV-3211-85-1024 24 V DC
PIR6W-1PS-24VAC/DC-R01 ❷
24 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-24VAC/DC
RM699BV-3211-85-1012
12 V DC
PIR6W-1PS-42VAC/DC-R01 ❷
42 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-42VAC/DC
RM699BV-3211-85-1024 24 V DC
PIR6W-1PS-115VAC/DC-R01 ❷
115 V AC/DC
1,2 VA / 1,2 W
PI6W-1PS-115VAC/DC
RM699BV-3211-85-1024
24 V DC
PIR6W-1PS-230VAC/DC-R01 ❷
230 V AC/DC
1,2 VA / 1,2 W
PI6W-1PS-230VAC/DC
RM699BV-3211-85-1048
48 V DC
PIR6W-1PS-6VDC-T
6 V DC
0,2 W
PI6W-1PS-6VDC
RSR30-D05-A1-24-020-1
5 V DC
PIR6W-1PS-12VDC-T
12 V DC
0,2 W
PI6W-1PS-12/24VDC
RSR30-D12-A1-24-020-1
12 V DC
PIR6W-1PS-24VDC-T
24 V DC
0,3 W
PI6W-1PS-12/24VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-36VDC-T
36 V DC
0,3 W
PI6W-1PS-36VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-48VDC-T
48 V DC
0,4 W
PI6W-1PS-48VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-60VDC-T
60 V DC
0,5 W
PI6W-1PS-60VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-24VAC/DC-T
24 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-24VAC/DC
RSR30-D12-A1-24-020-1
12 V DC
PIR6W-1PS-42VAC/DC-T
42 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-42VAC/DC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-115VAC/DC-T
115 V AC/DC
1,0 VA / 1,0 W
PI6W-1PS-115VAC/DC
RSR30-D24-A1-24-020-1
24 V DC
PIR6W-1PS-6VDC-C
6 V DC
0,2 W
PI6W-1PS-6VDC
RSR30-D05-D1-04-025-1
5 V DC
PIR6W-1PS-12VDC-C
12 V DC
0,2 W
PI6W-1PS-12/24VDC
RSR30-D12-D1-04-025-1
12 V DC
PIR6W-1PS-24VDC-C
24 V DC
0,3 W
PI6W-1PS-12/24VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-36VDC-C
36 V DC
0,3 W
PI6W-1PS-36VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-48VDC-C
48 V DC
0,4 W
PI6W-1PS-48VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-60VDC-C
60 V DC
0,5 W
PI6W-1PS-60VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-24VAC/DC-C
24 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-24VAC/DC
RSR30-D12-D1-04-025-1
12 V DC
PIR6W-1PS-42VAC/DC-C
42 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-42VAC/DC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-115VAC/DC-C
115 V AC/DC
1,0 VA / 1,0 W
PI6W-1PS-115VAC/DC
RSR30-D24-D1-04-025-1
24 V DC
PIR6W-1PS-230VAC/DC-C
230 V AC/DC
1,0 VA / 1,0 W
PI6W-1PS-230VAC/DC
RSR30-D48-D1-04-025-1
48 V DC
PIR6W-1PS-6VDC-O
6 V DC
0,2 W
PI6W-1PS-6VDC
RSR30-D05-D1-02-040-1
5 V DC
PIR6W-1PS-12VDC-O
12 V DC
0,2 W
PI6W-1PS-12/24VDC
RSR30-D12-D1-02-040-1
12 V DC
PIR6W-1PS-24VDC-O
24 V DC
0,3 W
PI6W-1PS-12/24VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-36VDC-O
36 V DC
0,3 W
PI6W-1PS-36VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-48VDC-O
48 V DC
0,4 W
PI6W-1PS-48VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-60VDC-O
60 V DC
0,5 W
PI6W-1PS-60VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-24VAC/DC-O
24 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-24VAC/DC
RSR30-D12-D1-02-040-1
12 V DC
PIR6W-1PS-42VAC/DC-O
42 V AC/DC
0,5 VA / 0,4 W
PI6W-1PS-42VAC/DC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-115VAC/DC-O
115 V AC/DC
1,0 VA / 1,0 W
PI6W-1PS-115VAC/DC
RSR30-D24-D1-02-040-1
24 V DC
PIR6W-1PS-230VAC/DC-O
230 V AC/DC
1,0 VA / 1,0 W
PI6W-1PS-230VAC/DC
RSR30-D48-D1-02-040-1
48 V DC
The data in bold type pertain to the standard versions of the relays.
❷Version with gold-plated contacts.
❹It shall be remarked that rated input voltage
of the operational relay Us not always complies with the rated input voltage Un (which is important on ordering operational relays for sockets).
202
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR6WB-1PS-...
interface relays with spring terminals
RM699BV + PI6WB-1PS-…
RSR30 + PI6WB-1PS-…
•Width 6,2 mm • Interface relay PIR6WB-1PS-... consists of: spring
terminals ❶ universal socket, with electronic PI6WB-1PS-..., miniature
operational relay - electromagnetic RM699BV or solid state RSR30 ❷
•35 mm rail mount acc. to PN-EN 60715 • May be linked with interconnection strip type ZG20 • Equipped in LED green • Version for long control
lines, with anti-interference filter (PIR6WB-1P-230VAC/DC-10 ❹)
• Accessories: description plates PI6W-1246
• Recognitions, certifications, directives: RoHS,
Output circuit (RM699BV) - contact data ❷
Number and type of contacts (code of output)
Contact material
Max. switching voltage
Min. switching voltage
AC / DC
Rated load AC1
DC1
Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
AC1
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
AC1
• no load
Output circuit (RSR30) - output data ❷
1 CO (R) ❺
AgSnO2
400 V AC / 250 V DC
10 V
6 A / 250 V AC 6 A / 24 V DC; 0,15 A / 250 V DC
100 mA 10 A 20 ms
6 A
1 500 VA
1 W
 100 m 100 mA, 24 V 1 CO (R-01) ❺
AgSnO2/Au 3 µm ❸
30 V AC / 36 V DC ❸
5V
0,05 A / 30 V AC ❸
0,05 A / 36 V DC ❸
10 mA
0,1 A 20 ms ❸
0,05 A ❸
1,2 VA ❸
0,05 W
 30 m 10 mA, 5 V
360 cycles/hour
72 000 cycles/hour
Triac (T) ❺
Transistor (C) ❺
max. 2 A
max. 1 A
1 NO
1 NO
Number and type of outputs
Rated voltage
240 V AC
48 V DC
Max. output voltage
280 V AC 60 V DC
Min. output voltage
12 V AC
1,5 V DC
1A
Rated continuous output current AC1
DC1
1A
Min. making capacity current
50 mA 1 mA
Max. off-state leakage current (rest condition)
1,5 mA
1 mA
Max. on-state voltage drop on the connection (operating state) 1,2 V
0,4 V
Operating switching frequency
10 Hz
Type of output (code of output)
Input circuit
Transistor (O) ❺
max. 2 A
1 NO
24 V DC
32 V DC
1,5 V DC
2A
1 mA
1 mA
0,24 V
10 Hz
Rated voltage
DC
AC: 50/60 Hz AC/DC
Must release voltage
Operating range of supply voltage
Must operate voltage
Rated power consumption
DC
AC/DC
Max. length of control line
6 ... 60 V
24 ... 230 V AC:  0,2 Un
AC:  0,35 Un ❹ DC:  0,1 Un
0,8...1,2 Un 0,85...1,2 Un 6 V DC
 0,8 Un  0,85 Un 6 V DC AC: 0,6...0,85 Un ❹
0,2 ... 0,5 W
0,5 ... 1,2 VA / 0,4 ... 1,2 W
 300 m AC control voltage ❹
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • input - output
• input - output
• contact clearance
250 V AC
4 000 V 1,2 / 50 µs
III
3
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
6 000 V 1,2 / 50 µs
1 000 V AC
50/60 Hz, 1 min., output R and R-01,
Insulation according to PN-EN 60664-1
Input - output distance
• clearance / creepage
type of clearance: micro-disconnection
 6 mm /  8 mm
The data in bold type pertain to the standard versions of the relays. ❶Spring fixing terminals for electric wires (cage springs CAGE CLAMP® - is the
❷Characteristics of the contact capacity of relays PIR6WB-1PS-...
registered trademark of WAGO Kontakttechnik GmbH & Co. KG, Germany).
with RM699BV - see page 39; PIR6WB-1PS-... with RSR30 - see catalogue ”Solid state relays” and www.relpol.com.pl ❸For gold-plated contacts
- when the maximum values given have been exceeded, the gold layer is destroyed. Then, the advantages of gold-plating disappear and the values are
as for AgSnO2 contacts (see beside), and electrical life of these contacts may be shorter than of normal contacts. ❹Refers version for long control
lines (max. 300 m) PIR6WB-1P-230VAC/DC-10 - relay which includes the socket PI6WB-1P-230VAC/DC-10 with integrated anti-interference filter
(desigend on the basis of appropriately selected elements R and C, and Zener diode), resistant to occurrence of induced voltages in long distances of
control wires, and operational miniature relay RM699BV-3011-85-1060. ❺Type of outputs: R - contacts AgSnO2; R01 - contacts AgSnO2/Au 3 µm;
T - triac; C - transistor; O - transistor.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
203
PIR6WB-1PS-...
interface relays with spring terminals
General data
Operating time (typical value)
Release time (typical value)
PIR6WB-1PS-...-R/-R01: DC: 8
AC/DC:
PIR6WB-1PS-...-T:
ms
µs
PIR6WB-1PS-...-C/-O: DC: 50 µs
PIR6WB-1PS-...-R/-R01: DC: 10 ms
AC/DC:
PIR6WB-1PS-...-T:
Protection category
Environmental protection
Shock resistance
Vibration resistance
DC: 1/2 cycle + 1 ms
PIR6WB-1PS-...-R:
DC: 600
20 ms
10 ms
AC/DC: 10 ms
AC/DC: 25 ms (18 ms ❹)
AC/DC: 30 ms
AC/DC: 20 ms
µs
> 0,5 x 105 6 A, 250 V AC
PIR6WB-1PS-...-R/-R01: > 107
98,3 x 6,2 x 84,6 mm
55 g
PIR6WB-1PS-...-R/-R01/-T: -40...+70 oC ...-C/-O: -25...+70 oC
PIR6WB-1P-230VAC/DC-10 ❹: -25...+70 oC
PIR6WB-1PS-...-R/-R01:
-40...+55 oC ...-T/-C/-O: -25...+55 oC
PIR6WB-1PS-230VAC/DC-R/-R01/-C/-O: -25...+50 oC ❻
PIR6WB-1P-230VAC/DC-10 ❹: -25...+50 oC ❻
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
10 g
5 g 10...500 Hz
PIR6WB-1PS-...-C/-O: Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
DC: 100
❹ Version for long control lines (max. 300 m), with anti-interference filter.
❻ For versions 230VAC/DC and 230VAC/DC-10: the distance of min. 5 mm between the mounting relays.
Connection diagrams
Dimensions
PIR6WB-1PS-...-R, PIR6WB-1PS-...-R01
PIR6WB-1P-230VAC/DC-10
PIR6WB-1PS-...-T, PIR6WB-1PS-...-C, PIR6WB-1PS-...-O
Inter­­­­con­nection strip type ZG20
Ordering codes
Ordering codes PIR6WB-1PS-... are specified in Table 1,
„Interface relay code” column.
204
Location of the
description plate
Description plate PI6W-1246
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR6WB-1PS-...
interface relays with spring terminals
Wire connection
The drawings present the sequence of operations in course of inserting wires to the spring terminal, and the recommended
screwdriver to be used for opening of case springs, comply with the DIN 5264 FORM „A”.
Mounting
Relays PIR6WB-1PS-... ❻ are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Connections:
max. cross section of the cables: 1 x 0,22...2,5 mm2 (1 x 24...14 AWG), length of the cable deinsulation: 9 mm.
Interface relay PIR6WB-1PS-... consists of: spring terminals universal socket, with electronic PI6WB-1PS-...,
miniature operational relay - electromagnetic RM699BV or solid state RSR30 ❺.
PIR6WB-1PS-... may be linked with inter­­­­con­nection strip type ZG20. Strip ZG20 bridges common input or output
signals, maximum permissible current is 36 A / 250 V AC. Colours of strips: ZG20-1 red, ZG20-2 black, ZG20-3 blue.
Description plates of PI6W-1246 type are offered for PIR6WB-1PS-... relays; they are delivered with the relays,
not mounted.
❻ For versions 230VAC/DC and 230VAC/DC-10: the distance of min. 5 mm between the mounting relays.
PI6WB-1PS-...
Green LED:
signalling the operation
status of the relay.
RM699BV
RSR30
Interconnection strip ZG20:
bridging of common
input or output signals.
PI6W-1246
ZG20
Movable ejector: protection
and easy replacement
of the operational relay.
PIR6WB-1PS-...-R
Interface relay:
socket PI6WB-1PS-…
and relay RM699BV
205
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR6WB-1PS-...
interface relays with spring terminals
Table 1
Table of codes
Interface relay code
206
Rated
input
voltage
Un ❼
Power
of input circuit
Socket code
Operational relay
code
Rated
voltage of
operational
relay
Us ❼
PIR6WB-1PS-6VDC-R
6 V DC
0,3 W
PI6WB-1PS-6VDC
RM699BV-3011-85-1005
5 V DC
PIR6WB-1PS-12VDC-R
12 V DC
0,2 W
PI6WB-1PS-12/24VDC
RM699BV-3011-85-1012
12 V DC
PIR6WB-1PS-24VDC-R
24 V DC
0,3 W
PI6WB-1PS-12/24VDC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-36VDC-R
36 V DC
0,3 W
PI6WB-1PS-36VDC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-48VDC-R
48 V DC
0,4 W
PI6WB-1PS-48VDC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-60VDC-R
60 V DC
0,5 W
PI6WB-1PS-60VDC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-24VAC/DC-R
24 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-24VAC/DC
RM699BV-3011-85-1012
12 V DC
PIR6WB-1PS-42VAC/DC-R
42 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-42VAC/DC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-115VAC/DC-R
115 V AC/DC
1,2 VA / 1,2 W
PI6WB-1PS-115VAC/DC
RM699BV-3011-85-1024
24 V DC
PIR6WB-1PS-230VAC/DC-R ❻
230 V AC/DC
1,2 VA / 1,2 W
PI6WB-1PS-230VAC/DC
RM699BV-3011-85-1048
48 V DC
PIR6WB-1P-230VAC/DC-10 ❹ ❻
230 V AC/DC
2,1 VA / 1,0 W
PI6WB-1P-230VAC/DC-10
RM699BV-3011-85-1060
60 V DC
PIR6WB-1PS-6VDC-R01 ❸
6 V DC
0,3 W
PI6WB-1PS-6VDC
RM699BV-3211-85-1005
5 V DC
PIR6WB-1PS-12VDC-R01 ❸
12 V DC
0,2 W
PI6WB-1PS-12/24VDC
RM699BV-3211-85-1012
12 V DC
PIR6WB-1PS-24VDC-R01 ❸
24 V DC
0,3 W
PI6WB-1PS-12/24VDC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-36VDC-R01 ❸
36 V DC
0,3 W
PI6WB-1PS-36VDC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-48VDC-R01 ❸
48 V DC
0,4 W
PI6WB-1PS-48VDC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-60VDC-R01 ❸
60 V DC
0,5 W
PI6WB-1PS-60VDC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-24VAC/DC-R01 ❸
24 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-24VAC/DC
RM699BV-3211-85-1012
12 V DC
PIR6WB-1PS-42VAC/DC-R01 ❸
42 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-42VAC/DC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-115VAC/DC-R01 ❸
115 V AC/DC
1,2 VA / 1,2 W
PI6WB-1PS-115VAC/DC
RM699BV-3211-85-1024
24 V DC
PIR6WB-1PS-230VAC/DC-R01 ❸ ❻
230 V AC/DC
1,2 VA / 1,2 W
PI6WB-1PS-230VAC/DC
RM699BV-3211-85-1048
48 V DC
PIR6WB-1PS-6VDC-T
6 V DC
0,2 W
PI6WB-1PS-6VDC
RSR30-D05-A1-24-020-1
5 V DC
PIR6WB-1PS-12VDC-T
12 V DC
0,2 W
PI6WB-1PS-12/24VDC
RSR30-D12-A1-24-020-1
12 V DC
PIR6WB-1PS-24VDC-T
24 V DC
0,3 W
PI6WB-1PS-12/24VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-36VDC-T
36 V DC
0,3 W
PI6WB-1PS-36VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-48VDC-T
48 V DC
0,4 W
PI6WB-1PS-48VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-60VDC-T
60 V DC
0,5 W
PI6WB-1PS-60VDC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-24VAC/DC-T
24 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-24VAC/DC
RSR30-D12-A1-24-020-1
12 V DC
PIR6WB-1PS-42VAC/DC-T
42 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-42VAC/DC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-115VAC/DC-T
115 V AC/DC
1,0 VA / 1,0 W
PI6WB-1PS-115VAC/DC
RSR30-D24-A1-24-020-1
24 V DC
PIR6WB-1PS-6VDC-C
6 V DC
0,2 W
PI6WB-1PS-6VDC
RSR30-D05-D1-04-025-1
5 V DC
PIR6WB-1PS-12VDC-C
12 V DC
0,2 W
PI6WB-1PS-12/24VDC
RSR30-D12-D1-04-025-1
12 V DC
PIR6WB-1PS-24VDC-C
24 V DC
0,3 W
PI6WB-1PS-12/24VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-36VDC-C
36 V DC
0,3 W
PI6WB-1PS-36VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-48VDC-C
48 V DC
0,4 W
PI6WB-1PS-48VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-60VDC-C
60 V DC
0,5 W
PI6WB-1PS-60VDC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-24VAC/DC-C
24 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-24VAC/DC
RSR30-D12-D1-04-025-1
12 V DC
PIR6WB-1PS-42VAC/DC-C
42 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-42VAC/DC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-115VAC/DC-C
115 V AC/DC
1,0 VA / 1,0 W
PI6WB-1PS-115VAC/DC
RSR30-D24-D1-04-025-1
24 V DC
PIR6WB-1PS-230VAC/DC-C ❻
230 V AC/DC
1,0 VA / 1,0 W
PI6WB-1PS-230VAC/DC
RSR30-D48-D1-04-025-1
48 V DC
PIR6WB-1PS-6VDC-O
6 V DC
0,2 W
PI6WB-1PS-6VDC
RSR30-D05-D1-02-040-1
5 V DC
PIR6WB-1PS-12VDC-O
12 V DC
0,2 W
PI6WB-1PS-12/24VDC
RSR30-D12-D1-02-040-1
12 V DC
PIR6WB-1PS-24VDC-O
24 V DC
0,3 W
PI6WB-1PS-12/24VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-36VDC-O
36 V DC
0,3 W
PI6WB-1PS-36VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-48VDC-O
48 V DC
0,4 W
PI6WB-1PS-48VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-60VDC-O
60 V DC
0,5 W
PI6WB-1PS-60VDC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-24VAC/DC-O
24 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-24VAC/DC
RSR30-D12-D1-02-040-1
12 V DC
PIR6WB-1PS-42VAC/DC-O
42 V AC/DC
0,5 VA / 0,4 W
PI6WB-1PS-42VAC/DC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-115VAC/DC-O
115 V AC/DC
1,0 VA / 1,0 W
PI6WB-1PS-115VAC/DC
RSR30-D24-D1-02-040-1
24 V DC
PIR6WB-1PS-230VAC/DC-O ❻
230 V AC/DC
1,0 VA / 1,0 W
PI6WB-1PS-230VAC/DC
RSR30-D48-D1-02-040-1
48 V DC
The data in bold type pertain to the standard versions of the relays.
❸ Version with gold-plated contacts.
❹ Version for long control lines (max. 300 m),
❻ For versions 230VAC/DC and 230VAC/DC-10: the distance of min. 5 mm between the mounting relays. ❼It shall be remarked
with anti-interference filter.
that rated input voltage of the operational relay Us not always complies with the rated input voltage Un (which is important on ordering operational relays for sockets).
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PI6W-1P
socket 6,2 mm
•Width 6,2 mm • Socket PI6W-1P without electronic
•Co-operate with relays: electromagnetic RM699BV or solid state RSR30 ❶
•The input voltage complies with the voltage of the operational relay
applied
•35 mm rail mount acc. to PN-EN 60715
• May be linked with interconnection strip type ZG20
•Accessories: description plates PI6W-1246
•Recognitions, certifications, directives: RoHS,
Output circuit
Number and type of contacts / outputs
Max. voltage
Max. load Rated current
1 CO
400 V AC / 250 V DC
6 A / 250 V AC
6A
RM699BV:
AC1
Insulation according to PN-EN 60664-1
RSR30:
1 NO ❶
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Dielectric strength • input - output
• input - output
Input - output distance
• clearance / creepage
250 V AC
4 000 V 1,2 / 50 µs
III
3
4 000 V AC
50/60 Hz, 1 min., type of insulation: reinforced
6 000 V 1,2 / 50 µs
Dimensions (L x W x H)
Weight
Ambient temperature
Protection category
Environmental protection
98,5 x 6,2 x 85,5 mm
40 g
-40...+70 oC
-40...+55 oC
-40...+60 oC 12, 24 V DC
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
 6 mm /  8 mm
General data
• storage
• operating
Connection diagram
Dimensions
RM699BV
RSR30 ❶
Ordering codes
Ordering codes: PI6W-1P.
Mounting
Sockets PI6W-1P are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Connections:
max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the cable deinsulation:
9 mm, max. tightening moment for the terminal: 0,3 Nm.
PI6W-1P may be linked with inter­­­­con­nection strip type ZG20 (see pages 198-199). Description plates of PI6W-1246
type are offered for PI6W-1P sockets (see pages 198-199).
207
❶ Solid state relays RSR30 type - see catalogue ”Solid state relays” and www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-PI-... ...........................
Installation relays
Electromagnetic relays of the MT-PI-... series in installation module cover,
designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715.
The relays are recognized and certified by:
They meet the requirements of RoHS Directive.
209
MT-PI-...
installation relays
MT-PI-...-11-...
MT-PI-...-22-...
•Installation relays - electromagnetic • AC, DC and AC/DC coils • Cover
- installation module, width 17,5 mm • Load of AC1 up to 16 A / 250 V
(versions 1 CO, 1 NO ) and up to 8 A / 250 V (versions 2 CO, 2 NO)
•Light indicator (LED diode) - supply voltage
•Application: automatic systems in buildings - in cooperation with control
timers, switches, control switches; electric systems; industrial automation
and power engineering automation; switchgears of modular equipment
• Recognitions, certifications, directives:
Contact data
Number and type of contacts
Contact material
Max. switching voltage
Min. switching voltage
Rated load Min. switching current
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC1
DC1
AC1
AC1
Coil data
1 CO, 1 NO
AgNi
400 V AC / 300 V DC
5V
16 A / 250 V AC
16 A / 24 V DC
5 mA
30 A ❶
16 A
4 000 VA 0,3 W
 100 m
2 CO, 2 NO
8 A / 250 V AC
8 A / 24 V DC
15 A
8A
2 000 VA
600 cycles/hour
72 000 cycles/hour
Rated • versions 1 CO, 2 CO 50/60 Hz AC
voltage
DC
• versions 1 NO, 2 NO
50 Hz AC
AC: 50 Hz AC/DC
Must release voltage
Operating range of supply voltage
Rated • versions 1 CO, 2 CO
AC
power
DC
consumption
DC
• versions 1 NO, 2 NO
AC
AC/DC
AC/DC
115 ... 230 V
12 ... 48 V
230 V
12 ... 115 V
AC:  0,15 Un
DC:  0,05 Un
0,85...1,1 Un AC: 50/60 Hz
see Tables 1, 2, 3, 4
 1,0 VA 115 V AC, 230 V AC, AC: 50 Hz
 0,5 W 12 V DC
 0,65 W 24 V DC, 48 V DC
 0,5 VA 230 V AC, AC: 50 Hz
 0,75 VA / 0,75 W 12 V AC/DC, AC: 50 Hz
 0,65 VA / 0,65 W 24 V AC/DC, 48 V AC/DC, 115 V AC/DC, AC: 50 Hz
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric • between coil and contacts
strength
• contact clearance
• pole - pole
250 V AC
4 000 V 1,2 / 50 µs
II
1
contact plate: V-0 cover: V-1 UL94
3 000 V AC
contacts 1 CO and 2 CO, type of insulation: basic
4 000 V AC
contacts 1 NO and 2 NO, type of insulation: reinforced
1 000 V AC
type of clearance: micro-disconnection
2 000 V AC
contacts 2 CO, type of insulation: basic
2 500 V AC
contacts 2 NO, type of insulation: basic
Insulation according to PN-EN 60664-1
General data
Operating / release time (typical values)
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Relative humidity
Shock resistance
Vibration resistance
(NO/NC)
15 ms / 20 ms
> 107
90 ❷ x 17,5 x 63,5 mm
60 g
-40...+70 oC
-20...+45 oC
IP 20 PN-EN 60529
up to 90%
15 g
9 g / 5 g 10...150 Hz
65 g
The data in bold type pertain to the standard versions of the relays.
❶UL only for 15 A.
❷ Length with 35 mm rail taps: 98,8 mm.
209
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-PI-...
installation relays
Coil data - DC voltage version (contacts 1 CO, 2 CO)
Table 1
Coil operating range
V DC
Coil code
Coil operating range
V DC
min. (at 20 °C)
max. (at 55 °C)
1012
12
10,2
13,2
1024
24
20,4
26,4
1048
48
40,8
52,8
Coil data - AC 50/60 Hz voltage version (contacts 1 CO, 2 CO)
Table 2
Coil operating range
V AC
Coil code
Coil operating range
V AC
5115
115
97,8
126,5
5230
230
195,5
253,0
min. (at 20 °C)
max. (at 55 °C)
Coil data - AC/DC 50 Hz voltage version (contacts 1 NO, 2 NO)
Coil operating range
V AC/DC
Coil code
8012
12
9024 ❸
Table 3
Coil operating range
V AC/DC
min. (at 20 °C)
max. (at 55 °C)
10,2
13,2
24 V AC/DC ❸
20,4
26,4
230 V AC ❸
195,5
253,0
8048
48
40,8
52,8
8115
115
97,8
126,5
❸ Selection of supply voltage via wires connection: 24 V AC/DC - to the terminals A1-A2; 230 V AC - to the terminals A1-A3.
Dimensions
1 CO
1 NO
2 CO
2 NO
210
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-PI-...
installation relays
Connection diagrams
Table of codes
Table 4
Installation relay code
❹
1 CO
1 NO
❹
Rated
coil voltage
contacts 1 CO, 1 NO
contacts 2 CO, 2 NO
MT-PI-17S-11-1012
MT-PI-17S-12-1012
12 V DC
MT-PI-17S-11-1024
MT-PI-17S-12-1024
24 V DC
MT-PI-17S-11-1048
MT-PI-17S-12-1048
48 V DC
MT-PI-17S-11-5115
MT-PI-17S-12-5115
115 V AC 50/60 Hz
MT-PI-17S-11-5230
MT-PI-17S-12-5230
230 V AC 50/60 Hz
MT-PI-17S-21-8012
MT-PI-17S-22-8012
12 V AC/DC
MT-PI-17S-21-8048
MT-PI-17S-22-8048
48 V AC/DC
MT-PI-17S-21-8115
MT-PI-17S-22-8115
115 V AC/DC
MT-PI-17S-21-9024 
MT-PI-17S-22-9024 
24 V AC/DC
❸
❸
230 V AC 50 Hz
❸ Selection of supply voltage via wires connection:
24 V AC/DC - to the terminals A1-A2; 230 V AC - to the terminals A1-A3.
2 CO
2 NO
❹ Terminal A3 occurs only in versions MT-PI-17S-21-9024, MT-PI-17S-22-9024;
used to supply relays with rated voltage 230 V AC 50 Hz - connection to the
terminals A1-A3.
Mounting
Relays MT-PI-... are designed for direct
mounting on 35 mm rail mount acc. to
PN-EN 60715. Operational position - any.
Connections: max. cross section of the cables:
1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG),
length of the cable deinsulation: 6,5 mm, max.
tightening moment for the terminal: 0,6 Nm.
Two taps:
easy assembly on 35 mm rail,
firm tapping (top and bottom).
Green LED:
signalling the operation
status of the relay.
Ordering codes ❺
Type
Cover
Number and
type of contacts
Coil code
M T – P I
Cover
17S - installation module, width 17,5 mm
see Tables 1, 2, 3 page 210
Number and type of contacts
11 - 1 CO
12 - 2 CO
21 - 1 NO
22 - 2 NO
Example of ordering code ❺:
MT-PI-17S-22-9024relay MT-PI-..., cover - installation module, width 17,5 mm, two normally open contacts,
contact material AgNi, coil voltage 230 V AC 50 Hz or 24 V AC/DC AC: 50 Hz ❸
❺ Ordering codes MT-PI-... are specified in Table 4, "Installation relay code" column.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
211
www.relpol.com.pl
installation module covers
213
MT-TUB-... ........................ 217
MT-T..-... .......................... 221
MT-TSD-... ........................ 225
MT-TUA-... ........................
TR4N 4 CO........................
TR4N 1 CO, 2 CO................
228
232
industrial covers
236
PIR15...T with module T(COM3) .240
T-R4.................................
Time relays
Multifunction and single-function universal time relays for power-generation and industrial automation.
Time relays of MT-T..-... series in installation module cover, designed for 35 mm rail mount acc. to PN-EN 60715.
TR4N, T-R4, PIR15...T time relays are universal and highly reliable components of electrical systems
in power-generation and industrial automation. They are also used in other electrical applications.
They perform various time functions with high precision in systems. They are distinguished by their high
switching capacity, long mechanical and electrical life. They are highly resistant to atmospheric conditions.
They meet the requirements of electromagnetic compatibility. They are designed for mounting on 35 mm
rail mount acc. to PN-EN 60715 or on panel mounting.
The relays are recognized and certified by:
They meet the requirements of RoHS Directive.
; certification pending:
MT-TUA-...
time relays
•Multifunction time relay (10 time functions; 8 time ranges)
•Cadmium - free contacts • AC/DC input voltages
•Cover - installation module, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to PN-EN 60715
• Application: in low-voltage systems
• Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuit - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load
Rated current
Max. breaking capacity Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
AC1
DC1
AC1
AC1
Input circuit
1 CO
AgNi
400 V AC / 300 V DC
10 A / 250 V AC
10 A / 24 V DC; 0,3 A / 250 V DC
10 A / 250 V AC
16 A / 250 V AC
0,3 W 5 V, 5 mA
 100 m
600 cycles/hour
12...240 V
Rated voltage
AC: 50/60 Hz AC/DC
Operating range of supply voltage
0,9...1,1 Un
Rated power consumption
AC
 4,5 VA AC: 50 Hz
 1,5 W
DC
48...63 Hz
Range of supply frequency
AC
Control contact S ❶
0,7 Un
• min. voltage ❷
• min. time of pulse duration ❷
AC:  50 ms
Insulation according to PN-EN 60664-1
terminals (+)A1 – (-)A2
DC:
 20 ms
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - output
• contact clearance
250 V AC
2 500 V 1,2 / 50 µs
II
1
V-0 UL94
2 500 V AC
type of insulation: basic
1 000 V AC type of clearance: micro-disconnection
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Relative humidity
Shock / vibration resistance
> 0,5 x 105 10 A, 250 V AC
> 3 x 107
90 ❸ x 17,5 x 63,5 mm / 64 g
-40...+70 oC
-20...+45 oC
IP 20 PN-EN 60529
up to 85%
15 g / 0,35 mm 10...55 Hz
Functions
E, Wu, Bp, Bi, T, R, Ws, Wa, Esa, B
permanent switching ON and OFF
1 s ❹; 10 s; 1 min.; 10 min.; 1 h; 10 h; 1 d; 10 d
smooth - (0,1...1) x time range
± 5% ❺ ❹
± 0,5% ❹
± 0,05% / °C
± 0,05% / %HR
 50 ms
green LED U ON - indication of supply voltage U
green LED U flashing - measurement of T time
yellow LED R ON/OFF - output relay status
General data
Time module data
Time ranges
Timing adjustment
Setting accuracy
Repeatability
Values affecting the timing adjustment
Recovery time
LED indicator
• temperature
• humidity
❶The control terminal S is activated by connection to A1 terminal via the external control contact S. ❷Where the control signal is recognizable.
❸ Length with 35 mm rail taps: 98,8 mm. ❹ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical
parameters (significant influence of the operational relay operating time, processor start-time, and the moment of supply switching as referred to the AC
supply course). ❺ Calculated from the final range values, for the setting direction from minimum to maximum.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
213
MT-TUA-...
time relays
Time functions
E - ON delay.
R - OFF delay with the control contact S.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches on the output relay
R. Opening of the control contact S starts the set time of the delayed switching off of the output relay R. After the interval T has lapsed, the output
relay R switches off. If the control contact S is closed during the interval
T, the already measured time is reset, and the output relay R is switched
on again. The OFF delay of the output relay R will start when the control
contact S is opened again.
Wu - ON for the set interval.
Ws - Single shot for the set interval triggered by closing of the control
contact S.
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
Bp - Symmetrical cyclical operation pause first.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay R
is switched off. In the course of the interval T, any opening of the control
contact S does not affect the function to be performed. The output relay
R may be switched on again for the set interval, after the interval T has
lapsed, by closing the control contact S again.
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
Wa - ON for the set interval triggered with the control contact S.
Bi - Symmetrical cyclical operation pulse first.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S does not start the interval T, and it does
not change the position of the output relay R. Opening of the control
contact S immediately switches on the output relay R for the set time.
After the interval T has lapsed, the output relay R switches off. Opening
and closing of the control contact S in the course of the interval T does
not affect the function to be performed. The output relay R may be switched on again for the set interval with another closing and opening of the
control contact S.
T - Generation of the 0,5 s pulse after the interval T.
Applying the supply voltage U starts the interval T. After the interval T has
lapsed, the output relay switches on for 0,5 s (the time of the NO contact
of the output relay).
U - supply voltage; R - output state of the relay; S - control contact state; T - measured time; t - time axis
214
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-TUA-...
time relays
Time functions
Esa - ON and OFF delay with the control contact S.
B - Cyclical operation controlled with closing of the control contact S.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T - on-delay of the
output relay R. After the interval T has lapsed, the output relay R switches on. Opening of the control contact S begins further measurement of
the interval T - off-delay of the output relay R, and after the interval has
lapsed, the output relay switches off. In case the time for which the control contact S is closed in the course of measurement of the on-delay of
the output relay R is shorter than the set interval T, the output relay R
will switch on after the set interval T, and the output relay R will remain in
on position for the interval T. When the output relay R is in on position,
closing of the control contact S does not affect the function to be
performed.
The input of the time relay is supplied with U voltage continuously.
Closing of the control contact S immediately switches on the output relay R.
Each next closing of the control contact S results in a change of the status
of the output relay R to an opposite one (the feature of a bistable relay).
Permanent switching ON and OFF.
The functions ON and OFF are selected with TIME potentiometer.
In the ON function, the normally open contacts are closed all the time
whereas in the OFF function they are open. The position of the FUNC
potentio­meter is of no significance in these functions as is the preset
measurement time. The ON or OFF functions are used for the time relay
operation control in electric systems.
U - supply voltage; R - output state of the relay; S - control contact state; T - measured time; t - time axis
Additional functions
Supply diode: it is lit permanently when the time is not being measured.
In course of the T time measu­rement, it flashes at 500 ms period where
it is lit for 80% of the time, and off for 20% of the time.
Adjustment of the set values:
- the values of time and range are read in the course of the relay’s
operation. The set values may be modified at any moment,
- no change of the function is possible in the course of the relay’s
operation. Any change of the settings of the relay shall be read only after
the supply voltage has been switched off and on again.
Dimensions
Release: depending on the function to be performed, the relay is
released with the supply voltage or by connection of the S contact to
the A1 line. For DC supply, the positive pole must be connected to the
A1 line. The level of the S contact activation is adjusted automatically
depending on the supply voltage.
Supply: the relay may be supplied with DC voltage or AC voltage
48...63 Hz of 10,8...250 V. A programmed control of the supply voltage
has been applied so the processor shall not start operation if the voltage
is lower than approximately 10 V. The supply voltage is permanently
monitored in course of the operation of the relay. When the voltage drops
below 9 V for more than 50 ms, the relay shall be reset. Owing to this,
the regeneration time is programmed to 50 ms, and it does not depend on
the tolerance of the elements.
Front panel description
Time-adjusting
knob
Green LED
Time range
and function ON / OFF
adjusting knob
Function-adjusting
knob
Yellow LED
215
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-TUA-...
time relays
Connection diagram
Mounting
Relays MT-TUA-... are designed for direct mounting
on 35 mm rail mount acc. to PN-EN 60715. Operational
position - any. Connections: max. cross section of the
cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG),
length of the cable deinsulation: 6,5 mm, max. tightening
moment for the terminal: 0,6 Nm.
❶
1 CO
❶The control terminal S is activated by connection to A1 terminal
via the external control contact S.
Two taps:
easy assembly on 35 mm rail,
firm tapping (top and bottom).
Ordering codes
Type
Time functions
performed
M T – T U A
Cover
Number and type
of contacts
Rated input voltage
1 7 S
1 1
9 2 4 0
Time functions performed
UA - multifunction
Rated input voltage
Cover
17S - installation module, width 17,5 mm
9240 - 12...240 V AC/DC AC: 50/60 Hz
Number and type of contacts
11 - 1 CO
Example of ordering code:
MT-TUA-17S-11-9240 time relay MT-TUA-..., multifunction (relay perform 10 functions), cover - installation
module, width 17,5 mm, one changeover contact, contact material AgNi, rated input
voltage 12...240 V AC/DC AC: 50/60 Hz
216
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-TUB-...
time relays
•Multifunction time relay (10 time functions; 8 time ranges)
•Cadmium - free contacts • AC/DC input voltages
•Cover - installation module, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to PN-EN 60715
• Application: in low-voltage systems
• Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuit - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load
Rated current
Max. breaking capacity Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
AC1
DC1
AC1
AC1
Input circuit
1 CO
AgNi
400 V AC / 300 V DC
10 A / 250 V AC
10 A / 24 V DC; 0,3 A / 250 V DC
10 A / 250 V AC
16 A / 250 V AC
0,3 W 5 V, 5 mA
 100 m
600 cycles/hour
12...240 V
Rated voltage
AC: 50/60 Hz AC/DC
Operating range of supply voltage
0,9...1,1 Un
Rated power consumption
AC
 4,5 VA AC: 50 Hz
 1,5 W
DC
48...63 Hz
Range of supply frequency
AC
Control contact S ❶
0,7 Un
• min. voltage ❷
• min. time of pulse duration ❷
AC:  50 ms
Insulation according to PN-EN 60664-1
terminals (+)A1 – (-)A2
DC:
 20 ms
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - output
• contact clearance
250 V AC
2 500 V 1,2 / 50 µs
II
1
V-0 UL94
2 500 V AC
type of insulation: basic
1 000 V AC type of clearance: micro-disconnection
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Relative humidity
Shock / vibration resistance
> 0,5 x 105 10 A, 250 V AC
> 3 x 107
90 ❸ x 17,5 x 63,5 mm / 64 g
-40...+70 oC
-20...+45 oC
IP 20 PN-EN 60529
up to 85%
15 g / 0,35 mm 10...55 Hz
Functions
E, Wu, Bp, Bi, Ra, Esf, Wi, Wst, Est, Esp
permanent switching ON and OFF
1 s ❹; 10 s; 1 min.; 10 min.; 1 h; 10 h; 1 d; 10 d
smooth - (0,1...1) x time range
± 5% ❺ ❹
± 0,5% ❹
± 0,05% / °C
± 0,05% / %HR
 50 ms
green LED U ON - indication of supply voltage U
green LED U flashing - measurement of T time
yellow LED R ON/OFF - output relay status
General data
Time module data
Time ranges
Timing adjustment
Setting accuracy
Repeatability
Values affecting the timing adjustment
Recovery time
LED indicator
• temperature
• humidity
❶The control terminal S is activated by connection to A1 terminal via the external control contact S. ❷Where the control signal is recognizable.
❸ Length with 35 mm rail taps: 98,8 mm. ❹ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical
parameters (significant influence of the operational relay operating time, processor start-time, and the moment of supply switching as referred to the AC
supply course). ❺ Calculated from the final range values, for the setting direction from minimum to maximum.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
217
MT-TUB-...
time relays
Time functions
E - ON delay.
Esf - ON delay with the control contact S without the interval T extension.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
Wu - ON for the set interval.
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T - on-delay of the output
relay R. After the interval T has lapsed, the output relay R switches on
and remains in this position until the control contact S is closed again,
which instantly switches the output relay off for the time T, and after the
interval T has lapsed, the output relay R switches on again. In the course
of measurement of the interval T, opening or closing of the control contact
S does not affect the status of the output relay R. The output relay R may
be switched on again after the current cycle has been completed.
Wi - ON for the set interval controlled by closing of the control contact S,
with the function of switching off the output relay R prior to the lapse of
the interval T.
Bp - Symmetrical cyclical operation pause first.
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
Bi - Symmetrical cyclical operation pulse first.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
Ra - OFF delay with the control contact S, without extension
of the interval T.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R is switched off. Any next closing of the control contact S switches on
the output relay R again. In case the control contact S is closed again
during the interval T, the output relay is immediately switched off, and the
measured interval is cancelled. In the course of the interval T, any
opening of the control contact S does not affect the function to be
performed.
Wst - ON for the set interval by closing the control contact S, with
extension of the interval T - extension of the time of switching on the
output relay R.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R is switched off. The next closing of the control contact S immediately
switches on the output relay R for the interval T. In case the control
contact S is closed within the interval T, the measured time is cancelled,
and the interval T starts again.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches on the output relay
R. Opening of the control contact S starts the set time of the delayed switching off of the output relay R. After the interval T has lapsed, the output
relay R switches off. Opening or closing of the control contact S within the
interval T does not affect the function to be performed.
U - supply voltage; R - output state of the relay; S - control contact state; T - measured time; t - time axis
218
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-TUB-...
time relays
Time functions
Est - ON delay with closing of the control contact, with the interval T
extended.
Esp - ON delay - one cycle, with the control contact S.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T, and after the interval
T has lapsed, the output relay R switches on and remains in this position
until the control contact S is closed again or until the supply voltage U is
interrupted. Closing of the control contact S resets the thus far measured
time and starts the new interval T.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T, and after the interval
T has lapsed, the output relay R switches on and remains in this position
until the supply voltage U is interrupted. When the output relay R is on,
opening or closing of the control contact S does not affect its status.
U - supply voltage; R - output state of the relay;
S - control contact state; T - measured time; t - time axis
Permanent switching ON and OFF.
The functions ON and OFF are selected with TIME potentiometer.
In the ON function, the normally open contacts are closed all the time
whereas in the OFF function they are open. The position of the FUNC
potentio­meter is of no significance in these functions as is the preset
measurement time. The ON or OFF functions are used for the time relay
operation control in electric systems.
Additional functions
Supply diode: it is lit permanently when the time is not being measured.
In course of the T time measu­rement, it flashes at 500 ms period where
it is lit for 80% of the time, and off for 20% of the time.
Adjustment of the set values:
- the values of time and range are read in the course of the relay’s
operation. The set values may be modified at any moment,
- no change of the function is possible in the course of the relay’s
operation. Any change of the settings of the relay shall be read only after
the supply voltage has been switched off and on again.
Dimensions
Release: depending on the function to be performed, the relay is
released with the supply voltage or by connection of the S contact to
the A1 line. For DC supply, the positive pole must be connected to the
A1 line. The level of the S contact activation is adjusted automatically
depending on the supply voltage.
Supply: the relay may be supplied with DC voltage or AC voltage
48...63 Hz of 10,8...250 V. A programmed control of the supply voltage
has been applied so the processor shall not start operation if the voltage
is lower than approximately 10 V. The supply voltage is permanently
monitored in course of the operation of the relay. When the voltage drops
below 9 V for more than 50 ms, the relay shall be reset. Owing to this,
the regeneration time is programmed to 50 ms, and it does not depend on
the tolerance of the elements.
Front panel description
Time-adjusting
knob
Green LED
Time range
and function ON / OFF
adjusting knob
Function-adjusting
knob
Yellow LED
219
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-TUB-...
time relays
Connection diagram
Mounting
Relays MT-TUB-... are designed for direct mounting
on 35 mm rail mount acc. to PN-EN 60715. Operational
position - any. Connections: max. cross section of the
cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG),
length of the cable deinsulation: 6,5 mm, max. tightening
moment for the terminal: 0,6 Nm.
❶
1 CO
❶The control terminal S is activated by connection to A1 terminal
via the external control contact S.
Two taps:
easy assembly on 35 mm rail,
firm tapping (top and bottom).
Ordering codes
Type
Time functions
performed
M T – T U B
Cover
Number and type
of contacts
Rated input voltage
1 7 S
1 1
9 2 4 0
Time functions performed
UB - multifunction
Rated input voltage
Cover
17S - installation module, width 17,5 mm
9240 - 12...240 V AC/DC AC: 50/60 Hz
Number and type of contacts
11 - 1 CO
Example of ordering code:
MT-TUB-17S-11-9240 time relay MT-TUB-..., multifunction (relay perform 10 functions), cover - installation
module, width 17,5 mm, one changeover contact, contact material AgNi, rated input
voltage 12...240 V AC/DC AC: 50/60 Hz
220
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]pol.com.pl
MT-T..-...
❶
time relays
•Time relays with independently controled times T1 and T2
(7 versions of relays with 1 time function ❶; 7 time ranges)
•Cadmium - free contacts • AC/DC input voltages
•Cover - installation module, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to PN-EN 60715
• Application: in low-voltage systems
• Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuit - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load
Rated current
Max. breaking capacity Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
AC1
DC1
AC1
AC1
Input circuit
1 CO
AgNi
400 V AC / 300 V DC
10 A / 250 V AC
10 A / 24 V DC; 0,3 A / 250 V DC
10 A / 250 V AC
16 A / 250 V AC
0,3 W 5 V, 5 mA
 100 m
600 cycles/hour
12...240 V
Rated voltage
AC: 50/60 Hz AC/DC
Operating range of supply voltage
0,9...1,1 Un
Rated power consumption
AC
 4,5 VA AC: 50 Hz
 1,5 W
DC
48...63 Hz
Range of supply frequency
AC
Control contact S ❷
0,7 Un
• min. voltage ❸
• min. time of pulse duration ❸
AC:  50 ms
Insulation according to PN-EN 60664-1
terminals (+)A1 – (-)A2
DC:
 20 ms
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - output
• contact clearance
250 V AC
2 500 V 1,2 / 50 µs
II
1
V-0 UL94
2 500 V AC
type of insulation: basic
1 000 V AC type of clearance: micro-disconnection
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H) / Weight
Ambient temperature
• storage
• operating
Cover protection category
Relative humidity
Shock / vibration resistance
> 0,5 x 105 10 A, 250 V AC
> 3 x 107
90 ❹ x 17,5 x 63,5 mm / 64 g
-40...+70 oC
-20...+45 oC
IP 20 PN-EN 60529
up to 85%
15 g / 0,35 mm 10...55 Hz
Functions ❶
Time ranges
Timing adjustment
Setting accuracy
Repeatability
Values affecting the timing adjustment
Recovery time
LED indicator
ER, EWa, EWs, EWu + NWu, li + lp, WsWa, Wt
1 s ❺; 10 s; 1 min.; 10 min.; 1 h; 10 h; 100 h
smooth - (0,1...1) x time range
± 5% ❻ ❺
± 0,5% ❺
± 0,05% / °C
± 0,05% / %HR
 50 ms
green LED U ON - indication of supply voltage U
green LED U slow flashing - measurement of T1 time
green LED U fast flashing - measurement of T2 time
yellow LED R ON/OFF - output relay status
General data
Time module data
• temperature
• humidity
❶ Codes of versions - see ”Ordering codes”, page 224 and descriptions of time functions, pages 222, 223. ❷The control terminal S is activated by
connection to A1 terminal via the external control contact S. ❸Where the control signal is recognizable. ❹ Length with 35 mm rail taps: 98,8 mm.
❺ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical parameters (significant influence of the
operational relay operating time, processor start-time, and the moment of supply switching as referred to the AC supply course). ❻ Calculated from
the final range values, for the setting direction from minimum to maximum.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
221
MT-T..-...
❶
time relays
Time functions ❶
ER - ON delay and OFF delay with control contact S. Independent T1
and T2 settings.
Relay code: MT-TER-17S-11-9240
EWu + NWu - ON delay for the set interval or switching ON for the set
interval - switching OFF for the set interval - continuous ON with the
control contact S; independent settings of T1 and T2 intervals.
Relay code: MT-TEU-17S-11-9240
function EWu
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T1, and after it has
lapsed, the output relay R switches on. Opening of the control contact S
starts the interval T2, and after it has lapsed, the output relay R switches
off. In case the control contact S is closed in the course of the interval T2,
the measured time is reset and the output relay R remains switched on.
In case the control contact S is closed for time shorter than T1, the unit
will not switch the output relay R on.
EWa - OFF delay and breaking time delay with opening of the control
contact S; independent settings of T1 and T2 intervals.
Relay code: MT-TEA-17S-11-9240
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S switches on the output relay R. Opening
of the control contact S starts the interval T1, and after the interval has
lapsed, the output relay R switches off for the interval T2. Following the
interval T2, the output relay R will be switched on again when the control
contact S is closed on the lapse of the interval. In the course of the inter­
vals T1 and T2 the position of the control contact S is of no importance.
EWs - ON delay and ON for the set time with closing of the control contact
S; independent settings of T1 and T2 intervals.
Relay code: MT-TES-17S-11-9240
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T1, and after the
interval has lapsed, the output relay R switches on for the interval T2.
Following the interval T2, the output relay switches off, and the circuits awaits for the control contact S to be closed again. In the course
of the intervals T1 and T2 the position of the control contact S is of no
importance.
When the control contact S is open, application of the supply voltage U
starts operation in the EWu function - the interval T1, and after the interval
T1 has lapsed, the output relay switches on for the interval T2.
function NWu
When the control contact S is closed, application of the supply voltage U
starts operation in the NWu function - from switching on the output relay
R for the interval T1, and after the interval T1 has lapsed, the output relay
switches off for the interval T2, and following the interval T2, the output
relay R switches on for continuous time.
In the course of the relay operation, closing of the control contact S at
any time will cause reset and the operation in the NWu function will start
whereas opening of the control contact S at any time will cause reset and
the operation in the EWu function will start.
Ii + Ip - Cyclical operation in two independent intervals T1 and T2;
operation in the function li or lp depending on the position of the control
contact S.
Relay code: MT-TIP-17S-11-9240
function lp
Application of the supply voltage U when the control contact S is open
start the cyclical operation in the lp function - from the interval T1 (time
of switching off the output relay R), following which the output relay R
is switched on for the interval T2. The cyclical operation continues until
the supply voltage U is interrupted.
function li
When the control contact S is closed, application of the supply voltage U
starts operation in the li function - from switching on the output relay R
for the interval T1, and after the interval T1 has lapsed, the output relay
switches off for the interval T2. The cyclical operation continues until the
supply voltage U is interrupted.
U - supply voltage; R - output state of the relay;
S - control contact state; T1, T2 - measured times; t - time axis
❶ Codes of versions - see ”Ordering codes”, page 224
and descriptions of time functions, pages 222, 223.
In the course of the relay operation, closing of the control contact S at any
time will cause reset and the operation in the li function will start whereas
opening of the control contact S at any time will cause reset and the
operation in the lp function will start.
222
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-T..-...
❶
time relays
Time functions ❶
WsWa - ON for the set intervals T1 and T2 with the control contact S;
independent settings of T1 and T2 intervals.
Relay code: MT-TSA-17S-11-9240
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S switches the output relay R for the interval
T1, and after the interval has lapsed, the relay R is switched off. Opening
of the control contact S switches on the output relay R for the interval T2. If
the control contact S is open when the interval T1 lapses, the output relay
R will remain on for the interval T2. If the control contact S is closed when
the interval T2 lapses, the output relay R will remain on for the interval T1.
U - supply voltage; R - output state of the relay;
S - control contact state; T1, T2 - measured times; t - time axis
Wt - Monitoring of the sequence of pulses. Switching on is extended
with consecutive pulses / closings of the contact S; independent settings
of T1 and T2 intervals.
Relay code: MT-TWT-17S-11-9240
On applying the supply voltage U the output relay R is switched on for
the set interval t1. After the interval T1 has lapsed, the interval T2 starts
with the output relay R still switched on. For the output relay to switch
on, the control contact S must be closed and then opened (single pulse)
during the interval T2, which cancels the time already measured an starts
the interval T2 again. In case of absence of a single pulse prior to lapse
of the interval T2, the output relay R will switch off, and it may be switched
on after the supply voltage has been interrupted and applied again.
❶ Codes of versions - see ”Ordering codes”, page 224
and descriptions of time functions, pages 222, 223.
Additional functions
Supply diode: it is lit permanently when the time is not being measured.
In course of the T1 time measu­­­rement, it flashes at 500 ms period where
it is lit for 80% of the time, and off for 20% of the time. For the T2 time,
the period is 250 ms.
Adjustment of the set values: the values of time and range are read
in the course of the relay’s operation. The set values may be modified
at any moment.
Dimensions
Release:
- for the versions MT-TEU-..., MT-TIP-...: the relay is released with the
supply voltage,
- for other versions: the relay is released by connection of the S contact
to the A1 line. For DC supply, the positive pole must be connected to the
A1 line. The level of the S contact activation is adjusted automatically
depending on the supply voltage.
Supply: the relay may be supplied with DC voltage or AC voltage
48...63 Hz of 10,8...250 V. A programmed control of the supply voltage
has been applied so the processor shall not start operation if the voltage
is lower than approximately 10 V. The supply voltage is permanently
monitored in course of the operation of the relay. When the voltage drops
below 9 V for more than 50 ms, the relay shall be reset. Owing to this,
the regeneration time is programmed to 50 ms, and it does not depend on
the tolerance of the elements.
Front panel description
T1 time-adjusting
knob
T1 range-adjusting
knob
Green LED
T2 time-adjusting
knob
T2 range-adjusting
knob
Yellow LED
223
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-T..-...
❶
time relays
Connection diagram
Mounting
Relays MT-T..-... ❶ are designed for direct mounting
on 35 mm rail mount acc. to PN-EN 60715. Operational
position - any. Connections: max. cross section of the
cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG),
length of the cable deinsulation: 6,5 mm, max. tightening
moment for the terminal: 0,6 Nm.
❷
1 CO
❶ Codes of versions - see ”Ordering codes”, page 224
and descriptions of time functions, pages 222, 223.
❷The control terminal S is activated by connection to A1 terminal
via the external control contact S.
Two taps:
easy assembly on 35 mm rail,
firm tapping (top and bottom).
Ordering codes ❶
Type
Time functions
performed
M T – T
Cover
Number and type
of contacts
Rated input voltage
1 7 S
1 1
9 2 4 0
Time functions performed
(7 versions of relays) ❶
ER - relay performing a function ER
EA - relay performing a function EWa
ES - relay performing a function EWs
EU - relay performing a function EWu + NWu
IP - relay performing a function li + lp
SA - relay performing a function WsWa
WT - relay performing a function Wt
Cover
Rated input voltage
9240 - 12...240 V AC/DC AC: 50/60 Hz
Number and type of contacts
17S - installation module, width 17,5 mm
11 - 1 CO
Example of ordering code:
MT-TIP-17S-11-9240 time relay MT-TIP-..., single-function (relay perform function li + lp), cover - installation
module, width 17,5 mm, one changeover contact, contact material AgNi, rated input
voltage 12...240 V AC/DC AC: 50/60 Hz
224
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-TSD-...
time relays
•Star-Delta start-up with independently controled
times T1 and T2 (1 time function; 7 time ranges)
•Cadmium - free contacts • AC/DC input voltages
•Cover - installation module, width 17,5 mm
• Direct mounting on 35 mm rail mount acc. to PN-EN 60715
• Application: in low-voltage systems
• Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuits - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load
Rated current
Max. breaking capacity Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
Input circuit
AC1
DC1
AC1
AC1
2 x 1 CO
AgNi
400 V AC / 300 V DC
10 A / 250 V AC
10 A / 24 V DC; 0,3 A / 250 V DC
10 A / 250 V AC
16 A / 250 V AC
0,3 W 5 V, 5 mA
 100 m
600 cycles/hour
Rated voltage
AC: 50/60 Hz AC/DC
Operating range of supply voltage
Rated power consumption
AC
DC
Range of supply frequency
AC
12...240 V
0,9...1,1 Un
 4,5 VA AC: 50 Hz
 1,5 W
48...63 Hz
Insulation rated voltage
Rated surge voltage
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - outputs
• contact clearance
250 V AC
2 500 V 1,2 / 50 µs
II
1
V-0 UL94
2 500 V AC
type of insulation: basic
1 000 V AC type of clearance: micro-disconnection
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Relative humidity
Shock resistance
Vibration resistance
> 0,5 x 105 10 A, 250 V AC
> 3 x 107
90 ❶ x 17,5 x 63,5 mm
84 g
-40...+70 oC
-20...+45 oC
IP 20 PN-EN 60529
up to 85%
15 g
0,35 mm 10...55 Hz
Functions
Time ranges (start-up for the star) T1
Timing adjustment T1
Transit time (adjustable) ❷ T2
Setting accuracy
Repeatability
Values affecting • temperature
the timing adjustment
• humidity
Recovery time
LED indicator
SD
10 s; 30 s; 1 min.; 3 min.; 10 min.; 30 min.; 1 h
smooth - (0,05...1) x time range
smoothly within the range 0,05...1 s (linear adjustment of time)
± 5% ❸
± 3%
± 0,05% / °C
± 0,05% / %HR
 50 ms
green LED U ON - indication of supply voltage U
green LED U flashing - measurement of T1 and T2 times
yellow LEDs ON/OFF - contactors switching signal
Insulation according to PN-EN 60664-1
General data
Time module data
terminals (+)A1 – (-)A2
❶Length with 35 mm rail taps: 98,8 mm.
❷ Pause time between switching off the star contactor and switching on the delta contactor.
❸ Calculated from the final range values, for the setting direction from minimum to maximum.
225
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
MT-TSD-...
time relays
Time functions
Additional functions
SD - Star-Delta start-up
Supply diode: it is lit permanently when the time is not being measured.
In course of the T1 time measu­rement, it flashes at 500 ms period where
it is lit for 80% of the time, and off for 20% of the time. For the T2 time,
the period is 250 ms.
Adjustment of the set values: the values of time and range are read
in the course of the relay’s operation. The set values may be modified
at any moment.
When the supply voltage U is applied, the operating star-contact (15-18)
becomes closed, which is signaled with illumination of the yellow LED.
Measurement of the set time T1 starts, and the greed LED flashes at
500 ms. After the T1 time has lapsed, the star contact is disconnected
and the relay begins measuring the T2 time, which is signaled with the
green LED flashing at 250 ms. After the T2 time has lapsed, the delta
contact (25-28) is switched on together with the yellow LED, and the
green LED remains illuminated.
U - supply voltage; T1, T2 - measured times; t - time axis
Dimensions
Release: the relay is released with the supply voltage.
Supply: the relay may be supplied with DC voltage or AC voltage
48...63 Hz of 10,8...250 V. A programmed control of the supply voltage
has been applied so the processor shall not start operation if the voltage
is lower than approximately 10 V. The supply voltage is permanently
monitored in course of the operation of the relay. When the voltage drops
below 9 V for more than 50 ms, the relay shall be reset. Owing to this,
the regeneration time is programmed to 50 ms, and it does not depend on
the tolerance of the elements.
Front panel description
Yellow LED
T1 time-adjusting
knob
T1 range-adjusting
knob
Green LED
T2 transit
time-adjusting knob
Yellow LED
226
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
MT-TSD-...
time relays
Connection diagram
Mounting
Relays MT-TSD-... are designed for direct mounting
on 35 mm rail mount acc. to PN-EN 60715. Operational
position - any. Connections: max. cross section of the
cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG),
length of the cable deinsulation: 6,5 mm, max. tightening
moment for the terminal: 0,6 Nm.
2 x 1 CO
Two taps:
easy assembly on 35 mm rail,
firm tapping (top and bottom).
Ordering codes
Type
Time functions
performed
M T – T S D
Cover
Number and type
of contacts
Rated input voltage
1 7 S
1 2
9 2 4 0
Time functions performed
SD - delta-star start-up systems
Rated input voltage
Cover
17S - installation module, width 17,5 mm
9240 - 12...240 V AC/DC AC: 50/60 Hz
Number and type of contacts
12 - 2 x 1 CO
Example of ordering code:
MT-TSD-17S-12-9240 time relay MT-TSD-..., single-function (relay perform function SD), cover - installation
module, width 17,5 mm, one changeover contact, contact material AgNi, rated input
voltage 12...240 V AC/DC AC: 50/60 Hz
227
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
TR4N 4 CO
time relays
•10-function electronic time relays in compact cover • Cadmium - free
contacts • AC and AC/DC input voltages • Direct mounting on 35 mm
rail mount acc. to PN-EN 60715 • The main advantages of application:
simple selection of the performed function, possibility to control a few
circuits (4 changeover contacts), esthetic design in the control cabinet
• The switching capacity of contacts as in R4 electromagnetic relay
• Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuits - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC1
DC1
AC1
AC1
Input circuit
Rated voltage
50/60 Hz AC
AC: 50/60 Hz AC/DC
Operating range of supply voltage
4 CO
AgNi
250 V AC / 250 V DC
6 A / 250 V AC
6 A / 24 V DC; 0,15 A / 250 V DC
6A
1 500 VA
0,3 W 5 V, 5 mA
 100 m
1 200 cycles/hour
18 000 cycles/hour
115 ... 230 V
12 ... 24 V
0,9...1,1 Un
0,85...1,1 Un 2,2 VA 1,0 VA / 1,0 W
48...63 Hz
48...100 Hz
12 V AC/DC
24 V AC/DC, 115 V AC, 230 V AC
Rated power consumption
AC
115 V AC, 230 V AC
AC/DC
12 V AC/DC, 24 V AC/DC
Range of supply frequency
AC
AC/DC
Control contact S ❶
• min. voltage ❷
0,6 Un
• min. time of pulse duration ❷
AC:  25 ms
DC:  15 ms
Insulation according to PN-EN 60664-1
Insulation category
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - outputs
• contact clearance
Input - outputs distance
• clearance
• creepage
2 500 V AC
1 500 V AC
type of insulation: basic
type of clearance: micro-disconnection
 1,6 mm
 3,2 mm
General data
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
B250
II
2
V-1 UL94
• storage
• operating
(NO/NC)
> 105 6 A, 250 V AC
> 2 x 107
90 x 36 x 55 mm
115 g
-40...+70 oC
-20...+55 oC
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
10 g / 5 g
0,35 mm DA 10...55 Hz
The data in bold type pertain to the standard versions of the relays. 
❶The control terminal S is activated by connection to A1 terminal via the external control contact S.
❷Where the control signal is recognizable.
228
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
TR4N 4 CO
time relays
Time module data
Functions
Time ranges
Timing adjustment
Setting accuracy
Repeatability
Temperature influence
Recovery time
LED indicator
E, Wu, Bp, Bi, PWM, R, Ws, Wa, Esa, B
permanent switching ON and OFF
1 s ❸; 10 s; 1 min.; 10 min.; 1 h; 10 h; 1 d; 10 d
smooth - (0,1...1) x time range
± 5% (calculated from the final range values) ❸
± 0,5% ❸
± 0,01% / °C
90 ms
green LED - indication of supply voltage U
yellow LED - indication of time period T
and the status of outputs after the time T has been measured ❹
❸ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical parameters (significant influence of the
operational relay operating time). Recommend to set measuring time by experimental method. ❹ The yellow LED - T time measurement (pulsating);
excited operational relay; time not measured (steady light); de-excited operational relay, time not measured (no light).
Dimensions
Connections diagram
❶
4 CO
❶The control terminal S is activated by connection
to A1 terminal via the external control contact S.
Front panel description
AC1
Time-adjusting
knob
Function-adjusting
knob
Range and
function ON / OFF
adjusting knob
Yellow LED
Green LED
229
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
TR4N 4 CO
time relays
Time functions
E - ON delay.
R - OFF delay with the control contact S.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
Wu - ON for the set interval.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches on the output relay
R. Opening of the control contact S starts the set time of the delayed switching off of the output relay R. After the interval T has lapsed, the output
relay R switches off. If the control contact S is closed during the interval
T, the already measured time is reset, and the output relay R is switched
on again. The OFF delay of the output relay R will start when the control
contact S is opened again.
Ws - Single shot for the set interval triggered by closing of the control
contact S.
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
Bp - Symmetrical cyclical operation pause first.
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay R
is switched off. In the course of the interval T, any opening of the control
contact S does not affect the function to be performed. The output relay
R may be switched on again for the set interval, after the interval T has
lapsed, by closing the control contact S again.
Wa - ON for the set interval triggered with the control contact S.
Bi - Symmetrical cyclical operation pulse first.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
PWM - Pulse width modulation.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S does not start the interval T, and it does
not change the position of the output relay R. Opening of the control
contact S immediately switches on the output relay R for the set time.
After the interval T has lapsed, the output relay R switches off. Opening
and closing of the control contact S in the course of the interval T does
not affect the function to be performed. The output relay R may be switched on again for the set interval with another closing and opening of the
control contact S.
Set the relay to a single Tz cycle which is one of the time ranges available
for a time relay. The cycle shall be set with the time selection knob. Then,
set the interval T, i.e. the ON time of the output relay R with the time
fine setting knob. The interval T may be set from 0.1 to 1.0 of the time
range (Tz cycle). Applying the supply voltage U immediately switches on
the output relay R for the set interval, and after the interval has lapsed,
the output relay R switches off for the time left until the set time Tz. After
the Tz time, consecutive cycles start and are continued until the supply
voltage U is interrupted. In the course of the PWM function, the ON time
of the output relay R may be changed, and such change does not affect
the interval of the Tz cycle. The changed ON time of the output relay R
shall be realized starting from the new Tz cycle following the change.
U - supply voltage; R - output state of the relay; S - control contact state; Tz - value of the set interval; T - measured time; t - time axis
230
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
TR4N 4 CO
time relays
Time functions
Esa - ON and OFF delay with the control contact S.
B - Cyclical operation controlled with closing of the control contact S.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T - on-delay of the
output relay R. After the interval T has lapsed, the output relay R switches on. Opening of the control contact S begins further measurement of
the interval T - off-delay of the output relay R, and after the interval has
lapsed, the output relay switches off. In case the time for which the control contact S is closed in the course of measurement of the on-delay of
the output relay R is shorter than the set interval T, the output relay R
will switch on after the set interval T, and the output relay R will remain in
on position for the interval T. When the output relay R is in on position,
closing of the control contact S does not affect the function to be
performed.
The input of the time relay is supplied with U voltage continuously.
Closing of the control contact S immediately switches on the output relay R.
Each next closing of the control contact S results in a change of the status
of the output relay R to an opposite one (the feature of a bistable relay).
Permanent switching ON and OFF.
The functions ON and OFF are selected with TIME potentiometer.
In the ON function, the normally open contacts are closed all the time
whereas in the OFF function they are open. The position of the FUNC
potentio­meter is of no significance in these functions as is the preset
measurement time. The ON or OFF functions are used for the time relay
operation control in electric systems.
U - supply voltage; R - output state of the relay; S - control contact state; Tz - value of the set interval; T - measured time; t - time axis
Mounting
Relays TR4N 4 CO are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Operational position
- any. Connections: max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length of the
cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,6 Nm.
Ordering codes
Rated input voltage
Type
Number and type
of contacts
Time functions
performed
Rated input voltage
012AC/DC - 12 V AC/DC AC: 50/60 Hz
024AC/DC - 24 V AC/DC AC: 50/60 Hz
115AC - 115 V AC 50/60 Hz
230AC - 230 V AC 50/60 Hz
Number and type of contacts
14 - 4 CO
Time functions performed
M - multifunction
Examples of ordering codes:
TR4N-230AC-14-M TR4N-024AC/DC-14-M time relay TR4N 4 CO, multifunction (relay perform 10 functions), four changeover
contacts, contact material AgNi, rated input voltage 230 V AC 50/60 Hz
time relay TR4N 4 CO, multifunction (relay perform 10 functions), four changeover
contacts, contact material AgNi, rated input voltage 24 V AC/DC AC: 50/60 Hz
231
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
TR4N 1 CO, 2 CO
time relays
•10-function electronic time relays in compact cover • Cadmium - free
contacts • AC and AC/DC input voltages • Direct mounting on 35 mm rail
mount acc. to PN-EN 60715 • The main advantages of application: simple
selection of the performed function, possibility to control one or two circuits (1 or 2 changeover contacts), esthetic design in the control cabinet •
The switching capacity of contacts as in RM85 (1 CO) or RM84 (2 CO)
electromagnetic relay • Compliance with standard PN-EN 61812-1
• Recognitions, certifications, directives:
Output circuits - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC1
DC1
AC1
AC1
Input circuit
Rated voltage
50/60 Hz AC
AC: 50/60 Hz AC/DC
Operating range of supply voltage
1 CO
AgNi
440 V AC / 300 V DC
16 A / 250 V AC
16 A / 24 V DC; 0,3 A / 250 V DC
16 A
4 000 VA
0,3 W 5 V, 5 mA
 100 m
600 cycles/hour
18 000 cycles/hour
115 ... 230 V
12 ... 24 V
0,9...1,2 Un
12 V AC/DC
0,85...1,2 Un 24 V AC/DC, 115 V AC, 230 V AC
1,3 VA 115 V AC 1,7 VA 0,5 VA / 0,5 W 12 V AC/DC 0,7 VA / 0,7 W 48...63 Hz
48...100 Hz
Rated power consumption
AC
AC/DC
Range of supply frequency
AC
AC/DC
Control contact S ❶
0,6 Un
• min. voltage ❷
• min. time of pulse duration ❷
AC:  25 ms
Insulation according to PN-EN 60664-1
Insulation category
Overvoltage category
Insulation pollution degree
Flammability degree
Dielectric strength
• input - outputs
• contact clearance
Input - outputs distance
• clearance
• creepage
DC:
 15 ms
B250
III
2
V-1 UL94
2 000 V AC
1 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
 10 mm
 10 mm
General data
Electrical life
• resistive AC1
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
2 CO
AgNi
440 V AC / 300 V DC
8 A / 250 V AC 8 A / 24 V DC; 0,3 A / 250 V DC
8 A
2 000 VA
• storage
• operating
> 0,7 x 105 16 A, 250 V AC
> 3 x 107
90 x 17,6 x 55 mm
67 g
-40...+70 oC
-20...+55 oC
IP 20
PN-EN 60529
RTI
PN-EN 116000-3
15 g
0,35 mm DA 10...55 Hz
> 105 8 A, 250 V AC
The data in bold type pertain to the standard versions of the relays. 
❶The control terminal S is activated by connection to A1 terminal via the external control contact S.
❷Where the control signal is recognizable.
232
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
230 V AC
24 V AC/DC
TR4N 1 CO, 2 CO
time relays
Time module data
Functions
E, Wu, Bp, Bi, PWM, R, Ws, Wa, Esa, B
permanent switching ON and OFF
1 s ❸; 10 s; 1 min.; 10 min.; 1 h; 10 h; 1 d; 10 d
smooth - (0,1...1) x time range
± 5% (calculated from the final range values) ❸
± 0,5% ❸
± 0,01% / °C
80 ms
green LED - indication of supply voltage U
yellow LED - indication of time period T
and the status of outputs after the time T has been measured ❹
Time ranges
Timing adjustment
Setting accuracy
Repeatability
Temperature influence
Recovery time
LED indicator
❸ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical parameters (significant influence of the
operational relay operating time). Recommend to set measuring time by experimental method. ❹ The yellow LED - T time measurement (pulsating);
excited operational relay; time not measured (steady light); de-excited operational relay, time not measured (no light).
Dimensions
Front panel description
Range and
function ON / OFF
adjusting knob
Time-adjusting
knob
Function-adjusting
knob
1P
2P
Green
LED
AC1
Yellow LED
AC1
233
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
TR4N 1 CO, 2 CO
time relays
Time functions
E - ON delay.
R - OFF delay with the control contact S.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
Wu - ON for the set interval.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches on the output relay
R. Opening of the control contact S starts the set time of the delayed switching off of the output relay R. After the interval T has lapsed, the output
relay R switches off. If the control contact S is closed during the interval
T, the already measured time is reset, and the output relay R is switched
on again. The OFF delay of the output relay R will start when the control
contact S is opened again.
Ws - Single shot for the set interval triggered by closing of the control
contact S.
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
Bp - Symmetrical cyclical operation pause first.
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay R
is switched off. In the course of the interval T, any opening of the control
contact S does not affect the function to be performed. The output relay
R may be switched on again for the set interval, after the interval T has
lapsed, by closing the control contact S again.
Wa - ON for the set interval triggered with the control contact S.
Bi - Symmetrical cyclical operation pulse first.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
PWM - Pulse width modulation.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S does not start the interval T, and it does
not change the position of the output relay R. Opening of the control
contact S immediately switches on the output relay R for the set time.
After the interval T has lapsed, the output relay R switches off. Opening
and closing of the control contact S in the course of the interval T does
not affect the function to be performed. The output relay R may be switched on again for the set interval with another closing and opening of the
control contact S.
Connections diagrams
Set the relay to a single Tz cycle which is one of the time ranges available
for a time relay. The cycle shall be set with the time selection knob. Then,
set the interval T, i.e. the ON time of the output relay R with the time
fine setting knob. The interval T may be set from 0.1 to 1.0 of the time
range (Tz cycle). Applying the supply voltage U immediately switches on
the output relay R for the set interval, and after the interval has lapsed,
the output relay R switches off for the time left until the set time Tz. After
the Tz time, consecutive cycles start and are continued until the supply
voltage U is interrupted. In the course of the PWM function, the ON time
of the output relay R may be changed, and such change does not affect
the interval of the Tz cycle. The changed ON time of the output relay R
shall be realized starting from the new Tz cycle following the change.
❶
1 CO
❶
2 CO
❶The control terminal S is activated by connection to A1 terminal
via the external control contact S.
U - supply voltage; R - output state of the relay; S - control contact state; Tz - value of the set interval; T - measured time; t - time axis
234
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
TR4N 1 CO, 2 CO
time relays
Time functions
Esa - ON and OFF delay with the control contact S.
B - Cyclical operation controlled with closing of the control contact S.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T - on-delay of the
output relay R. After the interval T has lapsed, the output relay R switches on. Opening of the control contact S begins further measurement of
the interval T - off-delay of the output relay R, and after the interval has
lapsed, the output relay switches off. In case the time for which the control contact S is closed in the course of measurement of the on-delay of
the output relay R is shorter than the set interval T, the output relay R
will switch on after the set interval T, and the output relay R will remain in
on position for the interval T. When the output relay R is in on position,
closing of the control contact S does not affect the function to be
performed.
The input of the time relay is supplied with U voltage continuously.
Closing of the control contact S immediately switches on the output relay R.
Each next closing of the control contact S results in a change of the status
of the output relay R to an opposite one (the feature of a bistable relay).
Permanent switching ON and OFF.
The functions ON and OFF are selected with TIME potentiometer.
In the ON function, the normally open contacts are closed all the time
whereas in the OFF function they are open. The position of the FUNC
potentio­meter is of no significance in these functions as is the preset
measurement time. The ON or OFF functions are used for the time relay
operation control in electric systems.
U - supply voltage; R - output state of the relay; S - control contact state; Tz - value of the set interval; T - measured time; t - time axis
Mounting
Relays TR4N 1 CO, 2 CO are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715. Operational
position - any. Connections: max. cross section of the cables: 1 x 2,5 mm2 / 2 x 1,5 mm2 (1 x 14 / 2 x 16 AWG), length
of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,6 Nm.
Ordering codes
Rated input voltage
Type
Number and type
of contacts
Time functions
performed
Rated input voltage
012AC/DC - 12 V AC/DC AC: 50/60 Hz
024AC/DC - 24 V AC/DC AC: 50/60 Hz
115AC - 115 V AC 50/60 Hz
230AC - 230 V AC 50/60 Hz
Number and type of contacts
11 - 1 CO
12 - 2 CO
Time functions performed
M - multifunction
Examples of ordering codes:
TR4N-230AC-11-M TR4N-024AC/DC-12-M time relay TR4N 1 CO, multifunction (relay perform 10 functions), one changeover
contact, contact material AgNi, rated input voltage 230 V AC 50/60 Hz
time relay TR4N 2 CO, multifunction (relay perform 10 functions), two changeover
contacts, contact material AgNi, rated input voltage 24 V AC/DC AC: 50/60 Hz
235
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
T-R4
time relays
• Single-function, single-voltage time relays offered in the following
versions: T-R4E - relay with time function E, T-R4Wu - relay with time
function Wu, T-R4Bp - relay with time function Bp, T-R4Bi - relay with
time function Bi • Cadmium - free contacts • AC and DC input voltages • For plug-in sockets, 35 mm rail mount acc. to PN-EN 60715 or
on panel mounting • Applications: as time systems in electric circuits
of machines, technological lines, in automation systems, etc.
• Recognitions, certifications, directives: recognitions R4,
Output circuits - contact data
Number and type of contacts
Contact material
Max. switching voltage
Rated load Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
Input circuit
Rated voltage
Must release voltage
Operating range of supply voltage
Rated power consumption
Range of supply frequency
AC1
AC1
AC1
50/60 Hz AC
DC
AC
DC
Insulation according to PN-EN 60664-1
4 CO
AgNi
250 V AC / 250 V DC
6 A / 230 V AC
12 A
6A
1 500 VA
0,3 W 5 V, 5 mA
 100 m
1 200 cycles/hour
18 000 cycles/hour
24 ... 230 V
12 ... 24 V
AC:  0,2 Un
0,8...1,1 Un
2,2 VA
1,2 W
48...63 Hz
Insulation rated voltage
Overvoltage category
Dielectric strength
• input - outputs
• contact clearance
• pole - pole
Input - outputs distance
• clearance
• creepage
250 V AC
III
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
10 ms / 8 ms
2 500 V AC
1 500 V AC
2 000 V AC
DC:  0,1 Un
see Tables 1, 2
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 1,6 mm
 3,2 mm
General data
> 105 see Fig. 2
> 2 x 107
6 A, 250 V AC
75 x 27 x 91,5 mm
76,3 x 27 x 90 mm
T-R4 + GZMB4: 95 ❶ x 31 x 90 mm
T-R4: 27,5 x 21,2 x 62,5 mm
T-R4 + GZM4: 123 g T-R4 + GZT4: 113 g
T-R4 + GZMB4: 124 g
T-R4: 49 g
-20...+85 oC
-20...+55 oC
IP 20 (with socket)
PN-EN 60529
T-R4: RTI GZM4: RT0
PN-EN 116000-3
10 g / 5 g
5 g 10...150 Hz
T-R4 + GZM4:
T-R4 + GZT4:
Weight
Ambient temperature
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
• storage
• operating
(NO/NC)
The data in bold type pertain to the standard versions of the relays.
❶Length with 35 mm rail taps: 100 mm.
236
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
T-R4
time relays
Time module data
Functions
Time ranges
Timing adjustment
E, Wu, Bp, Bi
1 s ❶; 10 s; 1 min.; 10 min.; 1 h; 10 h; 100 h
range - with the range-adjusting knob / switch;
within the range - with the time-adjusting knob / potentiometer
± 5% (calculated from the final range values) ❶
± 1% ❶
± 0,01% / °C
100 ms
green LED - indication of supply voltage U
yellow LED - indication of time period T
and the status of outputs after the time T has been measured ❷
Setting accuracy
Repeatability
Temperature influence
Recovery time
LED indicator ❶ For first range setpoint (1 s) setting accuracy and repeatability are smaller than the given ones in technical parameters (significant influence of the
operational relay operating time). Recommend to set measuring time by experimental method. ❷ The yellow LED - T time measurement (pulsating);
excited operational relay; time not measured (steady light); de-excited operational relay, time not measured (no light).
Input data - DC voltage version
Input voltage
code
Rated input
voltage Un
V DC
Table 1
Input resistance
at 20 °C

Acceptable
resistance
Input - voltage range
V DC
min. (at 20 °C)
max. (at 55 °C)
1012
12
160
± 10%
9,6
13,2
1024
24
640
± 10%
19,2
26,4
The data in bold type pertain to the standard versions of the relays.
Input data - AC 50/60 Hz voltage version
Input voltage
code
Rated input
voltage Un
V AC
Table 2
Input resistance
at 20 °C

Acceptable
resistance
Input - voltage range
V AC
min. (at 20 °C)
max. (at 55 °C)
5024
24
158
± 10%
19,2
26,4
5115
115
3 610
± 10%
92,0
127,0
5230
230
16 100
± 10%
184,0
253,0
The data in bold type pertain to the standard versions of the relays.
Dimensions - T-R4
Dimensions - T-R4 with socket GZM4
Yellow LED
Time-adjusting
knob
Green LED
Range-adjusting
knob
237
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
T-R4
time relays
Time functions
E - ON delay.
Bi - Symmetrical cyclical operation pulse first.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
Wu - ON for the set interval.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
Bp - Symmetrical cyclical operation pause first.
Number of cycles
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
Fig. 1
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
Breaking capacity [kVA]
U - supply voltage; R - output state of the relay;
T - measured time; t - time axis
Fig. 2
Max. DC resistive load breaking capacity
Reduction factor
DC current [A]
Electrical life reduction factor
at AC inductive load
Power factor
N - electrical life
at AC1
DC voltage [V]
238
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Fig. 3
T-R4
time relays
Connection diagram
Mounting
Relays T-R4E, T-R4Wu, T-R4Bp, T-R4Bi are designed
for screw terminals plug-in sockets GZM4 ❶ ❷ and
GZT4 ❶ ❷, 35 mm rail mount acc. to PN-EN 60715 or
on panel mounting with two M3 screws. Connections:
max. cross section of the cables (stranded): 2 x 2,5 mm2
(2 x 14 AWG), length of the cable deinsulation: 6,5 mm,
max. tightening moment for the terminal: 0,7 Nm • spring
terminals plug-in sockets GZMB4 ❸ ❹, 35 mm rail mount
acc. to PN-EN 60715. Connections: max. cross section
of the cables: 1 x 0,2...1,5 mm2 (1 x 24...16 AWG), length
of the cable deinsulation: 9...11 mm.
Time
module
4 CO
Connection diagrams - sockets for T-R4
COM
COM
NO
NO
❶Plug-in sockets GZT4, GZM4 may be linked with inter­­­con­nection strip
type ZGGZ4 (see page 263). ❷For sockets GZT4, GZM4 are offered
❸ For sockets
clips TR4-2000 and description plates GZT4-0035.
❹For
GZMB4 are offered clips TR4-2000 and description plates TR.
NO
NC
sockets GZMB4 - see page 253 (wire connection).
NC
NC
COIL
COM
COIL
COIL
GZM4
GZT4
GZMB4
Separate T-R4 control circuits
from load circuits (T-R4 contacts)
GZM4: yes
GZT4: no
GZMB4:yes
Increased dielectric strength spacing
between coil and contacs clamps
GZM4: min. 5 kV
GZT4: min. 4 kV
GZMB4:min. 4 kV
Double A2(14) terminal is introduced
for easy wiring in electrical devices
GZM4: yes
GZT4: no
GZMB4:yes
Ordering codes
Cover protection category
Type
Time functions
performed
T – R 4
Contact
material
Number and
type of contacts
—
Connection
mode
—
Input voltage code
—
Contact material
Time functions performed
20 - AgNi
E - function E
Wu - function Wu
Bp - function Bp
Bi - function Bi
see Tables 1, 2 page 237
Number and type of contacts
14 - 4 CO
Cover protection category
2 - in cover, IP 40 version
Connection mode
3 - for plug-in sockets
Example of ordering code:
T-R4E-2014-23-1012
time relay T-R4, single-function (relay perform function
E - ON delay), for plug-in sockets, four changeover
contacts, contact material AgNi, rated input voltage
12 V DC, in cover IP 40
T-R4 + GZM4
239
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR15...T
time relays
R15 - 3 CO
+ GZP11
+ T (COM3)
Output circuits - contact data
with time module T(COM3)
•Time relay PIR15 - 3 CO (standard) consists of: electromagnetic relay
R15 - 3 CO, black plug-in socket GZP11, time module T(COM3), spring wire clip
GZP-0054, white description plate GZP-0035
•Time relay PIR15 - 2 CO consists of: electromagnetic relay R15 - 2 CO,
black plug-in socket GZP8, time module T(COM3), spring wire clip GZP-0054,
white description plate GZP-0035
•35 mm rail mount acc. to PN-EN 60715 or on panel mounting with two M3 screws
• Recognitions, certifications, directives: recognitions R15, RoHS,
Number and type of contacts
Contact material
Max. switching voltage
Rated load (capacity)
Max. inrush current
Rated current
Max. breaking capacity
Min. breaking capacity
Contact resistance
Max. operating frequency
• at rated load
• no load
AC1
AC15
AC3
DC1
DC13
AC1
AC1
Input circuit
2 CO, 3 CO
AgNi
440 V AC / 250 V DC
10 A / 250 V AC
3 A / 120 V
1,5 A / 240 V (B300)
370 W (single-phase motor; 0,5 HP / 240 V AC UL 508)
10 A / 24 V DC (see Fig. 3)
0,22 A / 120 V 0,1 A / 250 V (R300)
20 A
10 A
2 500 VA
0,3 W 5 V, 5 mA
 100 m
1 200 cycles/hour
12 000 cycles/hour
Rated voltage of output relay R15
50/60 Hz AC
DC
Supply voltage of time module T(COM3)
Operating range of supply voltage
Rated power consumption
AC
DC
Range of supply frequency
Control contact (B1) S ❶
• min. time of pulse duration ❷
24 ... 240 V
24 ... 220 V
24...240 V AC/DC (uniwersal module)
0,85...1,1 Un see Tables 1, 2
3,0 VA
2,0 W
48...63 Hz
Insulation rated voltage
Overvoltage category
Dielectric strength
• input - outputs
• contact clearance
• pole - pole
Input - outputs distance
• clearance
• creepage
250 V AC
III
Operating / release time (typical values)
Electrical life
• resistive AC1
• cos
Mechanical life (cycles)
Dimensions (L x W x H)
Weight
Ambient temperature
• storage
• operating
Cover protection category
Environmental protection
Shock resistance
Vibration resistance
AC: 12
Insulation according to PN-EN 60664-1
General data
100 ms
2 500 V AC
1 500 V AC
2 000 V AC
type of insulation: basic
type of clearance: micro-disconnection
type of insulation: basic
 3 mm
 4,2 mm
ms / 10 ms
> 2 x 105 10 A, 250 V AC
patrz Wykres 2
> 2 x 107
73 x 38,2 x 85,4 mm
3 CO: 175 g
2 CO: 168 g
-40...+70 oC
-40...+55 oC
IP 20
PN-EN 60529
R15: RTI GZP11, GZP8: RT0
10 g
5 g 10...500 Hz
DC: 18
PN-EN 116000-3
The data in bold type pertain to the standard versions of the relays. 
❶The control terminal B1 is activated by connection to A1 terminal via the external control contact S.
❷Where the control signal is recognizable.
240
www.relpol.com.pl
ms / 7 ms
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR15...T
time relays
with time module T(COM3)
Time module data
Functions
Function adjustment ❸
Time ranges
Timing adjustment ❸
E, Wu, Bp, Bi, R, Ws, Wa, Es
selection with microswitches
1 s; 10 s; 1 min.; 10 min.; 1 h; 10 h; 1 d; 10 d
range - with microswitches;
within the range - with a potentiometer
± 1% / 0,2%
± 0,01% / °C
150 ms
green LED - indication of time period T
and the status of outputs after the time T has been measured ❹
Setting accuracy / Repeatability
Temperature influence
Recovery time
LED indicator ❸ Settings of switches - see below. ❹ The green LED - T time measurement (pulsating); excited operational relay; time not measured (steady light);
de-excited operational relay, time not measured (no light).
Settings of switches ❹
Function
adjustment
E
Wu
Bi
Bp
R
Ws
Wa
Es
1s
10 s
1 min.
10 min.
1h
10 h
1d
10 d
switches
1, 2, 3
Timing
adjustment
(max.)
switches
4, 5, 6
Input data - DC voltage version
Input voltage
code
Rated input
voltage Un
V DC
Table 1
Input resistance
at 20 °C

Acceptable
resistance
Input - voltage range
V DC
min. (at 20 °C)
max. (at 55 °C)
024DC
24
430
± 10%
19,2
26,4
048DC
48
1 750
± 10%
38,4
52,8
060DC
60
2 700
± 10%
48,0
66,0
110DC
110
9 200
± 10%
88,0
121,0
120DC
120
11 000
± 10%
96,0
132,0
220DC
220
37 000
± 10%
176,0
242,0
The data in bold type pertain to the standard versions of the relays.
Input data - AC 50/60 Hz voltage version
Input voltage
code
Rated input
voltage Un
V AC
Table 2
Input resistance
at 20 °C

Acceptable
resistance
Input - voltage range
V AC
min. (at 20 °C)
max. (at 55 °C)
024AC
24
75
± 15%
19,2
26,4
048AC
48
305
± 15%
38,4
52,8
060AC
60
475
± 15%
48,0
66,0
110AC
110
1 700
± 15%
88,0
121,0
120AC
120
1 910
± 15%
96,0
132,0
230AC
230
7 080
± 15%
184,0
253,0
240AC
240
7 760
± 15%
192,0
264,0
The data in bold type pertain to the standard versions of the relays.
241
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR15...T
time relays
with time module T(COM3)
Time functions
E - ON delay.
Ws - Single shot for the set interval triggered by closing of the control
contact S.
On applying the supply voltage U the set interval T begins - off-delay
of the output relay R. After the interval T has lapsed, the output relay R
switches on and remains on until supply voltage U is interrupted.
Wu - ON for the set interval.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay R
is switched off. In the course of the interval T, any opening of the control
contact S does not affect the function to be performed. The output relay
R may be switched on again for the set interval, after the interval T has
lapsed, by closing the control contact S again.
Wa - ON for the set interval triggered with the control contact S.
Applying the supply voltage U immediately switches the output relay R
on for the set interval T. After the interval T has lapsed, the output relay
R switches off.
Bp - Symmetrical cyclical operation pause first.
Applying the supply voltage U starts the cyclical operation from the T
interval - switching the output relay R off followed by switching on the
output relay R for the interval T. The cyclical operation lasts until the
supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S does not start the interval T, and it does
not change the position of the output relay R. Opening of the control
contact S immediately switches on the output relay R for the set time.
After the interval T has lapsed, the output relay R switches off. Opening
and closing of the control contact S in the course of the interval T does
not affect the function to be performed. The output relay R may be switched on again for the set interval with another closing and opening of the
control contact S.
Es - ON delay with the control contact S.
Bi - Symmetrical cyclical operation pulse first.
Applying the supply voltage U starts the cyclical operation from
switching on the output relay R for the set interval T. After the interval T
has lapsed, the output relay R switches off for the interval T. The cyclical
operation lasts until the supply voltage U is interrupted.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S starts the interval T - on-delay of the
output relay R. After the interval T has lapsed, the output relay R switches on and remains in this position until the control contact S is opened.
In case the control contact S is closed for time shorter than the set interval
T, the output relay R will not activate.
R - OFF delay with the control contact S.
The input of the time relay is supplied with voltage U continuously.
Closing of the control contact S immediately switches on the output relay
R. Opening of the control contact S starts the set time of the delayed switching off of the output relay R. After the interval T has lapsed, the output
relay R switches off. If the control contact S is closed during the interval
T, the already measured time is reset, and the output relay R is switched
on again. The OFF delay of the output relay R will start when the control
contact S is opened again.
U - supply voltage; R - output state of the relay; S - control contact state;
T, T1, T2 - measured times; t - time axis
242
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
PIR15...T
time relays
with time module T(COM3)
Dimensions
Fig. 1
Number of cycles
N
Electrical life at AC resistive load.
Switching frequency: 1 200 cycles/hour
PIR15 - 2 CO
PIR15 - 3 CO
Fig. 2
Max. DC breaking capacity
A -resistive load DC1
B -inductive load L/R = 40 ms
Fig. 3
Reduction factor
DC current [A]
Electrical life reduction factor
at AC inductive load
Breaking capacity [kVA]
Power factor
N - electrical life
at AC1
DC voltage [V]
Mounting
Relays PIR15...T are designed for direct mounting on 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
with two M3 screws. Connections: max. cross section of the cables (stranded): 2 x 2,5 mm2 (2 x 14 AWG), length
of the cable deinsulation: 6,5 mm, max. tightening moment for the terminal: 0,5 Nm.
243
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
PIR15...T
time relays
with time module T(COM3)
Connection diagrams (screw terminals side view)
PIR15 - 2 CO
Dimensions - time module T(COM3)
PIR15 - 3 CO
❶
❶
❶The control terminal B1 is activated by connection
to A1 terminal via the external control contact S.
Ordering codes
Contact material
Type
Number and type of contacts
P I R 1 5
Input voltage code
—
Connection mode
Options
—
Number and type of contacts
2 - 2 CO
3 - 3 CO
see Tables 1, 2 page 241
Connection mode
0 - with socket (35 mm rail mount acc. to PN-EN 60715)
Contact material
0 - AgNi
Options
T - time module T(COM3)
Examples of ordering codes:
PIR153-230AC-00T
PIR152-024DC-00T
time relay PIR15 - 3 CO, which consists of: relay R15 - 3 CO
(contact material AgNi, rated input voltage 230 V AC 50/60 Hz),
black plug-in socket GZP11 (screw terminals), time module
T(COM3), spring wire clip GZP-0054, white description plate
GZP-0035
time relay PIR15 - 2 CO, which consists of: relay R15 - 2 CO
(contact material AgNi, rated input voltage 24 V DC, black
plug-in socket GZP8 (screw terminals), time module T(COM3),
spring wire clip GZP-0054, white description plate GZP-0035
244
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
T(COM3)
GZT80, GZM80, GZS80 ................ 246
GZMB80, EC 50, PW80 ................ 247
GD50, GZT92, GZM92, GZS92 ...... 248
EC 35, GD35, ES 32, EC 32 ........... 249
GZT2, GZM2, GZMB2 ................... 250
SU4/2D, SU4/2L, G4/2, GZT3 ..... 251
GZM3, GZT4, GZM4, GZ4 .............. 252
GS4, GZMB4, SU4D...................... 253
SU4L, G4 .................................... 254
GZY2G, GZ2, S2M, G2M ............... 255
PZ8, GZU8, GZ8, GZS8 ................. 256
GZP8, GOP8, PS11, PZ11 ............. 257
GZU11, GZ11, GZS11, GZP11 ....... 258
GOP11, GZ14U, GZ14, GOP14 ....... 259
GZ14Z, GUC11, PI6W-1P .............. 260
Mounting and sub-assemblies
of the relay and accessories
in the socket ................................. 254
Signalling / protecting modules
type M... ..................................... 261
Plug-in sockets
and
accessories
Interconnection strip ZGGZ80 ......... 262
Interconnection strip ZGGZ4 ........... 263
Additional features
for industrial relays......................... 264
Test buttons (no latching) and plugs .. 265
Plug-in sockets and accessories
availability index............................. 266
Plug-in sockets technical data ......... 268
Plug-in sockets are designed for miniature and industrial relays. They provide for mounting
of the relays in printed circuits, on 35 mm rail mount acc. to PN-EN 60715, and on panel mounting.
GZT..., GZM..., GZS..., GZ..., GZU... series are the sockets with screw terminals for mounting
on 35 mm rail mount acc. to PN-EN 60715, and on panel mounting. GZMB... serie are the sockets
with spring terminals for mounting on 35 mm rail mount acc. to PN-EN 60715.
The sockets have the following features:
- current circuits load: up to 12 A,
- available plug-in sockets with separation of input (coil) from output (contacts), i.e. coil terminals
on one side of the socket, and contact terminals on another side,
- adapted for mounting signalling / protecting modules type M... - sockets of GZT..., GZM..., GZS...,
GZMB..., ES 32 series.
The screw terminals plug-in sockets are recognized and certified by:
Plug-in sockets and accessories
GZT80
Connection diagrams ❸
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
75,3 x 15,5 x 61(67) mm ❷
Two poles, 5 mm pinout
12 A, 300 V AC
NC
COM
NO
COIL
RM84
RM85
RM85 inrush RM87L
RM85 105 °C sensitive
GZT80-0040
Accessories ❶
GZM80
GZT80-0035
RM87P
Module type M...
ZGGZ80
GZM80-0041
Connection diagrams ❸
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
78,1 x 15,9 x 61(66,5) mm ❷
Two poles, 5 mm pinout
12 A, 300 V AC
Dimensions
COM
NO
NC
COIL
RM84
RM85
RM85 inrush RM87L
RM85 105 °C sensitive
GZT80-0040
Accessories ❶
GZS80
GZT80-0035
RM87P
Module type M...
ZGGZ80
GZM80-0041
Connection diagrams ❸
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,5 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
76,8 x 15,8 x 42,5(57,1) mm ❷
Two poles, 5 mm pinout
10 A, 300 V AC
Dimensions
COM
NO
COIL
NC
RM84
RM85
RM85 inrush RM87L
RM85 105 °C sensitive
GZS-0040
Accessories ❶
246
Dimensions
TR
ZGGZ80
RM87P
Module type M...
GZM80-0041
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket
the height of socket with retainer / retractor clip is shown.
❸ For RM85, RM85 inrush, RM85 105 °C sensitive: loads above 12 A (GZT80, GZM80) or 10 A
(GZS80, GZMB80) require bridging pairs of terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 177, 185 (PI85 - connection). For RMB841, RMB851
- see pages 52, 77 (energizing of bistable relays)
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
GZMB80
Connection diagrams ❸
NC
COM
69
NO
45,2
36
16
30,2
Spring terminals
Max. cross section of the cables:
1 x 0,2...1,5 mm2
(1 x 24...16 AWG)
Length of the cable deinsulation:
9...11 mm
Dimensions
COIL
RM84
RM85
RM85 inrush RM87L
RM85 105 °C sensitive
RM87P
6
25,9
20,3
5,1
97
35 mm rail mount
acc. to PN-EN 60715
97 x 16 x 45,2(69) mm ❷
Two poles, 5 mm pinout
10 A, 300 V AC
5,1
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive
7,6
27
The drawings present the sequence of operations
in course of inserting wires to the spring terminal,
and the recommended screwdriver to be used for
opening of case springs, comply with the DIN 5264
FORM „A”.
GZMB80-0040
TR
Module type M...
GZM80-0041
Accessories ❶
EC 50
Wire connection
Pinout
Dimensions
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive,
RM83, RM94
For PCB
31,3 x 12,7 x 9 mm
Two poles, 5 mm pinout
8 A, 300 V AC
Accessories
PW80
MP25-2
MH25-2
RM81-0001
MP16-2
MH16-2
GD-0025
Pinout
Dimensions
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive,
RM83, RM94
For PCB
34,6 x 12,9 x 6,6 mm
Two poles, 5 mm pinout
8 A, 250 V AC
Accessories
MH25-2
RM81-0001
MH16-2
GD-0025
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket
the height of socket with retainer / retractor clip is shown.
❸ For RM85, RM85 inrush, RM85 105 °C sensitive: loads above 12 A (GZT80, GZM80) or 10 A
(GZS80, GZMB80) require bridging pairs of terminals: 11 with 21, 12 with 22, 14 with 24 - see pages 177, 185 (PI85 - connection). For RMB841, RMB851
- see pages 52, 77 (energizing of bistable relays)
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
247
Plug-in sockets and accessories
GD50
Pinout
Dimensions
For RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RMB841, RMB851,
RM87L, RM87L sensitive,
RM87P, RM87P sensitive,
RM83, RM94
For PCB
31,5 x 13 x 9 mm
Two poles, 5 mm pinout
8 A, 300 V AC
RM81-0001
Accessories
GZT92
MP25-2
GD-0025
MH25-2
MP16-2
GD-0016
MH16-2
Connection diagrams
For RM87N, RM87N sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
75,3 x 15,5 x 61(67) mm ❷
One pole, 3,5 mm pinout
12 A, 300 V AC
NC
COM
NO
GZT80-0040
COIL
RM87N
Accessories ❶
GZM92
GZT80-0035
ZGGZ80
Module type M...
GZM80-0041
Connection diagrams
For RM87N, RM87N sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
78,1 x 15,9 x 61(66,5) mm ❷
One pole, 3,5 mm pinout
12 A, 300 V AC
Dimensions
COM
NO
NC
GZT80-0040
COIL
RM87N
Accessories ❶
GZS92
GZT80-0035
ZGGZ80
Module type M...
GZM80-0041
Connection diagrams
For RM87N, RM87N sensitive
Screw terminals
Max. tightening moment
for the terminal: 0,5 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
76,8 x 15,8 x 42,5(57,1) mm ❷
One pole, 3,5 mm pinout
12 A, 300 V AC
COM
Dimensions
NC
NO
GZS-0040
COIL
RM87N
Accessories ❶
248
Dimensions
TR
ZGGZ80
Module type M...
GZM80-0041
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket the height of socket with retainer / retractor clip is shown.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
EC 35
Pinout
Dimensions
For RM87N, RM87N sensitive,
RM92
For PCB
31,3 x 12,7 x 9 mm
One pole, 3,5 mm pinout
12 A, 300 V AC
Accessories
GD35
MP25-2
MH25-2
RM81-0001
MP16-2
MH16-2
GD-0025
Pinout
Dimensions
For RM87N, RM87N sensitive,
RM92
For PCB
31,5 x 13 x 9 mm
One pole, 3,5 mm pinout
12 A, 300 V AC
RM81-0001
Accessories
ES 32
For RM96 1 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715 or on panel
mounting
75 x 15,5 x 42,5(59) mm ❷
One pole, 3,2 mm pinout
12 A, 300 V AC
GD-0025
MH25-2
MP16-2
GD-0016
MH16-2
Connection diagrams
NC
Dimensions
COM
NO
MS 16
GZMB80-0040
TR
Module type M...
COIL
Accessories ❶
EC 32
MP25-2
ZGGZ80
GZM80-0041
Pinout
Dimensions
For PCB
31 x 12,7 x 9 mm
One pole, 3,2 mm pinout
12 A, 300 V AC
Accessories
MP16-2
MH16-2
249
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket the height of socket with retainer / retractor clip is shown.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets and accessories
GZT2
Connection diagram
Dimensions
For R2
NO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
76,3 x 27 x 42,5(80) mm ❷
Two poles
12 A, 300 V AC
NC
ZGGZ4
COIL
COM
GZT4-0040
Accessories ❶
GZM2
GZT4-0035
G4 1052
Module type M...
Connection diagram
For R2
Dimensions
COM
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
75 x 27 x 61(82) mm ❷
Two poles
12 A, 300 V AC
NO
NC
ZGGZ4
COIL
GZT4-0040
Accessories ❶
GZMB2
GZT4-0035
Connection diagram
Spring terminals
Max. cross section of the cables:
1 x 0,2...1,5 mm2
(1 x 24...16 AWG)
Length of the cable deinsulation:
9...11 mm
35 mm rail mount
acc. to PN-EN 60715
95 x 31 x 42,5(80) mm ❷
Two poles
10 A, 300 V AC
Module type M...
Dimensions
80
COM
42,5
33,2
24
NO
31
NC
30,2
For R2
G4 1052
5
16,8
95
COIL
13,5
27
The drawings present the sequence of operations
in course of inserting wires to the spring terminal,
and the recommended screwdriver to be used for
opening of case springs, comply with the DIN 5264
FORM „A”.
Wire connection
holes
GZMB4-0040
TR
Accessories ❶
250
Module type M...
Release
holes
G4 1052
Wire connection
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket the height of socket with retainer / retractor clip is shown.
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
SU4/2D
Pinout
Dimensions
For R2
For PCB
29,6 x 21,5 x 11 mm
Two poles
12 A, 250 V AC
Accessories ❹
SU4/2L
G4 1053
G4 1050
Dimensions of opening on panel mounting
Dimensions
For R2
Solder terminals
29,6 x 21,5 x 18,1 mm
Two poles
12 A, 250 V AC
Accessories ❹
G4/2
G4 1053
G4 1050
G4 1040
Pinout of openings on panel mounting
Dimensions
For R2
Solder terminals
40,5 x 21,5 x 18,1 mm
Two poles
12 A, 250 V AC
Accessories ❹
GZT3
G4 1053
G4 1050
Connection diagram
Dimensions
For R3
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
76,3 x 27 x 42,5(80) mm ❷
Three poles
10 A, 300 V AC
NO
NC
ZGGZ4
COIL
COM
GZT4-0040
Accessories ❶
GZT4-0035
G4 1052
Module type M...
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket the height of socket with retainer / retractor clip is shown. ❹ G4 1053 - for R2...WT, R4...WT relays; G4 1050 - for R2, R4 without WT
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
251
Plug-in sockets and accessories
GZM3
For R3
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
75 x 27 x 61(82) mm ❷
Three poles
10 A, 300 V AC
Connection diagram
Dimensions
COM
NO
NC
ZGGZ4
COIL
GZT4-0040
Accessories ❶
GZT4
❺
GZT4-0035
G4 1052
Module type M...
Connection diagram
Dimensions
For R4, T-R4
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
76,3 x 27 x 42,5(80) mm ❷
Four poles
6 A, 300 V AC
NO
NC
ZGGZ4
COIL
COM
TR4-2000
Accessories ❶ ❻
GZM4
For R4, T-R4
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
75 x 27 x 61(82) mm ❷
Four poles
6 A, 300 V AC
GZT4-0040
GZT4-0035
G4 1052
Module type M...
Connection diagram
Dimensions
COM
NO
NC
ZGGZ4
COIL
TR4-2000
Accessories ❶ ❻
GZ4
For R4
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
66,4 x 29,5 x 29 mm
Four poles
10 A, 300 V AC
GZT4-0040
GZT4-0035
Connection diagram
G4 1052
Module type M...
Dimensions
NO
NC
COIL
COM
Accessories
252
G4 1052
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261.
❷ In the bracket the
height of socket with retainer / retractor clip is shown. ❻ For R4 relays: G4 1052, GZT4-0040, GZMB-0040, GZT4-0035, TR, module type M...; for T-R4 relays:
TR4-2000, GZT4-0035, TR
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
GS4
Connection diagram
For R4
Dimensions
NO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
67 x 30,8 x 30(~63,7) mm ❼
Four poles
6 A, 300 V AC
NC
COIL
COM
Accessories
GZMB4
GS4-0036
Connection diagram
Spring terminals
Max. cross section of the cables:
1 x 0,2...1,5 mm2
(1 x 24...16 AWG)
Length of the cable deinsulation:
9...11 mm
35 mm rail mount
acc. to PN-EN 60715
95 x 31 x 42,5(80) mm ❷
Four poles
10 A, 300 V AC
Dimensions
80
COM
42,5
33,2
24
NO
31
NC
30,2
For R4, T-R4
GS4-0035
5
16,8
95
COIL
13,5
27
The drawings present the sequence of operations
in course of inserting wires to the spring terminal,
and the recommended screwdriver to be used for
opening of case springs, comply with the DIN 5264
FORM „A”.
Wire connection
holes
GZMB4-0040
TR
Module type M...
G4 1052
Accessories ❶ ❻
SU4D
Release
holes
TR4-2000
Wire connection
Pinout
Dimensions
For R4
For PCB
29,6 x 21,5 x 11 mm
Four poles
6 A, 250 V AC
Accessories ❹
G4 1053
G4 1050
❶ Mounting and sub-assemblies of accessories in the socket - see page 254. Signalling / protecting modules type M... - see page 261. ❷ In the bracket the height
of socket with retainer / retractor clip is shown. ❹ G4 1053 - for R2...WT, R4...WT relays; G4 1050 - for R2, R4 without WT❻ For R4 relays: G4 1052, GZT4-0040,
GZMB-0040, GZT4-0035, TR, module type M...; for T-R4 relays: TR4-2000, GZT4-0035, TR ❼ In the bracket the height of socket with spring wire clip is shown.
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
253
Plug-in sockets and accessories
SU4L
Dimensions of opening on panel mounting
Dimensions
For R4
Solder terminals
29,6 x 21,5 x 18,1 mm
Four poles
6 A, 250 V AC
Accessories ❹
G4
G4 1053
G4 1050
G4 1040
Pinout of openings on panel mounting
Dimensions
For R4
Solder terminals
40,5 x 21,5 x 18,1 mm
Four poles
6 A, 250 V AC
Accessories ❹
G4 1053
G4 1050
❹ G4 1053 - for R2...WT, R4...WT relays; G4 1050 - for R2, R4 without WT
Mounting and sub-assemblies of the relay and accessories in the socket
Signalling / protecting module
type M...
Electromagnetic
relay
Removing the relay from the socket
with a retrainer / retractor clip
Retainer / retractor clip
Description plate
Screw terminals
plug-in socket
254
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
GZY2G
For RY2
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
78,7 x 28 x 32,4 mm
Two poles
12 A, 250 V AC
Connection diagram
Dimensions
NC
NO
COM
COIL
Accessories
GZ2
For R2M
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
65,2 x 20 x 25 mm
Two poles
7 A, 250 V AC
Connection diagram
Dimensions
NO
NC
COIL
COM
Accessories
S2M
GZ2 1060
GZ2 1111
Pinout
Dimensions
For R2M
For PCB
29,6 x 14 x 10,5 mm
Two poles
5 A, 250 V AC
Accessories
G4 1050
G2M
Dimensions
For R2M
Solder terminals
40,5 x 14 x 10,5 mm
Two poles
5 A, 250 V AC
Accessories
G4 1050
G2M 1020
255
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets and accessories
PZ8
❺
Connection diagram
Dimensions
For R15 - 2 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
68,2 x 38 x 24,2 mm
Two poles
10 A, 250 V AC
Accessories
GZU8
PZ11 0031
Connection diagram
Adaptor
Dimensions
For R15 - 2 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
82 x 35,5 x 25,7 mm
Two poles
10 A, 300 V AC
Accessories
GZ8
For R15 - 2 CO
GZU 1052
Connection diagram
Mounting
dimensions
Dimensions
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
On panel mounting
82,8 x 35,5 x 22,5 mm
Two poles
10 A, 300 V AC
Accessories
GZS8
GZ 1050
Connection diagram
Dimensions
For R15 - 2 CO
Screw terminals
Max. tightening moment
for the terminal: 1,0 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
51,3 x 40,8 x 21 mm
Two poles
10 A, 300 V AC
256
❺ Have obtained LR Type Approval Certificate (Lloyd’s Register).
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
GZP8
Connection diagram
Dimensions
For R15 - 2 CO
Screw terminals
Max. tightening moment
for the terminal: 0,5 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
73 x 38,2 x 27,2 mm
Two poles
12 A, 300 V AC
Time module T(COM3)
Accessories
GZP-0054
GZP-0035
GOP8
Dimensions
For R15 - 2 CO
Solder terminals
47,2 x 32 x 22 mm
Two poles
10 A, 250 V AC
Accessories
PS11
❺
R159 1051
Connection diagram
R15 5922
Dimensions
For R15 - 3 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
68,2 x 38 x 24,2 mm
Three poles
10 A, 250 V AC
Accessories
PZ11 ❺
PZ11 0031
Connection diagram
Dimensions
For R15 - 3 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
68,2 x 38 x 24,2 mm
Three poles
10 A, 250 V AC
Accessories
PZ11 0031
257
❺ Have obtained LR Type Approval Certificate (Lloyd’s Register).
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets and accessories
GZU11
Connection diagram
Adaptor
Dimensions
For R15 - 3 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
82 x 35,5 x 25,7 mm
Three poles
10 A, 250 V AC
Accessories
GZ11
For R15 - 3 CO
GZU 1052
Connection diagram
Mounting
dimensions
Dimensions
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
On panel mounting
82,8 x 35,5 x 22,5 mm
Three poles
10 A, 250 V AC
Accessories
GZS11
GZ 1050
Connection diagram
Dimensions
For R15 - 3 CO
Screw terminals
Max. tightening moment
for the terminal: 1,0 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
51,3 x 43 x 30 mm
Three poles
10 A, 300 V AC
GZP11
Connection diagram
Dimensions
For R15 - 3 CO
Screw terminals
Max. tightening moment
for the terminal: 0,5 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
73 x 38,2 x 27,2 mm
Three poles
12 A, 300 V AC
Time module T(COM3)
Accessories
GZP-0054
GZP-0035
258
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories
GOP11
Dimensions
For R15 - 3 CO
Solder terminals
47,2 x 32 x 22 mm
Three poles
10 A, 250 V AC
Accessories
GZ14U
R159 1051
Connection diagram
R15 5922
Adaptor
Dimensions
For R15 - 4 CO
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
96,8 x 46,4 x 33,3 mm
Four poles
10 A, 250 V AC
Accessories
GZ14
For R15 - 4 CO
GZ14 0737
Connection diagram
Mounting
dimensions
Dimensions
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
On panel mounting
96,8 x 46,4 x 24,5 mm
Four poles
10 A, 250 V AC
Accessories
GZ14 0737
GOP14
Dimensions
For R15 - 4 CO
Solder terminals
50 x 42 x 23 mm
Four poles
10 A, 250 V AC
Accessories
R15 0736
R15 5922
259
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets and accessories
GZ14Z
Connection diagram
Mounting
dimensions
For R15 - 4 CO
Dimensions
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
On panel mounting, behind
92,2 x 46 x 23 mm
Four poles
10 A, 250 V AC
(screw terminals
side view)
Accessories
GUC11 ❽
GZ14 0737
Connection diagram
Dimensions
For RUC faston 4,8x0,5, RUC-M
Screw terminals
Max. tightening moment
for the terminal: 0,7 Nm
35 mm rail mount
acc. to PN-EN 60715
or on panel mounting
82 x 42,2 x 26,5 mm
Three poles
16 A, 250 V AC
Accessories
PI6W-1P
MBA
Dimensions
Connection diagram
For RM699BV, RSR30 ❾
RM699BV
Screw terminals
Max. tightening moment
for the terminal: 0,3 Nm
35 mm rail mount
acc. to PN-EN 60715
98,5 x 6,2 x 85,5 mm
One pole
6 A, 250 V AC
RSR30
PI6W-1P
Accessories
ZG20
PI6W-1246
❽For RUC faston 4,8 x 0,5 and RUC-M, with GUC11 socket, max. switching voltages and coil voltages of relays are limited to 250 V AC / DC.
❾Solid state relays RSR30 type - see catalogue ”Solid state relays” and www.relpol.com.pl
260
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Signalling / protecting modules type M...
For sockets type: GZT80, GZM80, GZS80, GZMB80, GZT92, GZM92, GZS92, ES 32,
GZT2, GZM2, GZMB2, GZT3, GZM3, GZT4, GZM4, GZMB4
Modules type M... are parallely connected with relay coil.
Polarity P: -A1/+A2. Polarity N: +A1/-A2.
Modules type M...
Layout
Voltage
Type of module ❶ ❷
Module D (polarization P)
6/230 V DC
M21P
Module D (polarization N)
6/230 V DC
M21N
Module LD (polarization P)
6/24 V DC
24/60 V DC
110/230 V DC
M31R, M31G
M32R, M32G
M33R, M33G
Module LD (polarization N)
6/24 V DC
24/60 V DC
110/230 V DC
M41R, M41G
M42R, M42G
M43R, M43G
Module RC
6/24 V AC
24/60 V AC
110/240 V AC
M51
M52
M53
Module L
6/24 V AC/DC
24/60 V AC/DC
110/230 V AC/DC
M61R, M61G
M62R, M62G
M63R, M63G
Module LV
6/24 V AC/DC
24/60 V AC/DC
110/230 V AC/DC
M91R, M91G
M92R, M92G
M93R, M93G
Module V
24 V AC
130 V AC
230 V AC
M71
M72
M73
Module R
110/230 V AC
M103
It limits overvoltage on DC coils.
It limits overvoltage on DC coils.
It limits overvoltage on DC coils.
Coil energizing indication.
It limits overvoltage on DC coils.
Coil energizing indication.
It protects against EMC disturbance.
It limits overvoltage.
Coil energizing indication.
It limits overvoltage on AC and DC coils.
Coil energizing indication.
It limits overvoltage on AC and DC coils.
No indication.
It limits overvoltage on AC coils.
❶ M...R - LED red, M...G - LED green
❷ When ordering modules indicate their color: gray or black.
MODULE
type M...
LED red
M...R
LED green
M...G
261
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Interconnection strips ZGGZ80
PI85-...-00L.
ZGGZ80
ZGGZ80 for:
Plug-in
sockets
GZT80
GZM80
GZS80
GZT92
GZM92
GZS92
ES 32
Relays
for plug-in sockets
RM84, RM85, RM85 inrush,
RM85 105 °C sensitive,
RM87L ❷, RM87P ❷
RM87N ❷
Interface
relays ❶
PI84-...-M..G(GZT80 + RM84)
PI84-...-00L. (GZM80 + RM84)
PI85-...-M..G(GZT80 + RM85)
PI85-...-00L. (GZM80 + RM85)
RM96 1 CO
❶ Interface relay PI84 (PI85) is offered as a set: plug-in socket GZT80 or GZM80 + miniature relay RM84
(RM85) + signalling / protecting module type M... + retainer / retractor clip GZT80-0040 + description plate
GZT80-0035. ❷ Also versions RM87. sensitive
Interconnection strip ZGGZ80
• designed for the co-operation with plug-in sockets
of miniature relays and with interface relays
PI84 and PI85, which are equipped with screw terminals; sockets and relays are mounted
on 35 mm rail mount acc. to PN-EN 60715,
• bridges common input signals (coil terminals
A1 or A2) or output signals - see photo at the top,
• maximum permissible current is 10 A / 250 V AC,
• possibility of connection of 8 sockets or relays,
• colours of strips: ZGGZ80-1 grey, ZGGZ80-2 black.
262
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Interconnection strips ZGGZ4
PIR2-...-00L.
ZGGZ4
ZGGZ4 for:
Plug-in
sockets
Relays
for plug-in sockets
Interface
relays ❶
GZT2
GZM2
GZT3
GZM3
GZT4
GZM4
R2...WT
PIR2-...-00L. (GZM2 + R2...WT)
PIR3-...-00L. (GZM3 + R3...WT)
PIR4-...-00L. (GZM4 + R4...WT)
R3...WT
R4...WT
❸ Interface relay PIR2 (PIR3, PIR4) is offered as a set: plug-in socket GZM2 (GZM3, GZM4) + miniature
industrial relay R2 (R3, R4) + signalling / protecting module type M... + retainer / retractor clip GZT4-0040
+ description plate GZT4-0035.
Interconnection strip ZGGZ4
• designed for the co-operation with plug-in sockets
of miniature industrial relays and with interface relays
PIR2, PIR3 and PIR4, which are equipped with screw
terminals; sockets and relays are mounted on 35 mm
rail mount acc. to PN-EN 60715,
• bridges common input signals (coil terminals
A1 or A2) or output signals - see photo at the top,
• maximum permissible current is 10 A / 250 V AC,
• possibility of connection of 6 sockets or relays,
• colours of strips: ZGGZ4-1 grey, ZGGZ4-2 black.
263
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Additional features for industrial relays
WT - mechanical indicator + lockable front test button; basic features of standard industrial relays: R2, R3, R4, R15
- 2 CO, 3 CO - for plug-in sockets. Detailed information for individual relays: see ”Ordering codes - Additional features”.
Type ❶
Description
For industrial relays
W
mechanical indicator
R2, R3, R4,
R15 - 2 CO, 3 CO
T
lockable front test button,
orange colour - AC coils,
green colour - DC coils
R2, R3, R4,
R15 - 2 CO, 3 CO
L
light indicator (LED diode),
located inside the relay
R2, R3, R4, RY2,
R15 - 2 CO, 3 CO, 4 CO
RUC, RUC-M
D
surge suppression element (diode)
- only for DC coils
R2, R3, R4, RY2,
R15 - 2 CO, 3 CO, 4 CO
V
surge suppression element (varistor)
- only for AC coils
R15 - 2 CO, 3 CO
K
test button without block function
R15 - 4 CO
RUC
❶ Available combinations:
WT, WTL, WTD, WTLD - in relays R2, R3, R4 for plug-in sockets
L, D, LD - in relays RY2 for plug-in sockets
WT, WTL, WTD, WTLD, WTV, WTLV - in relays R15 - 2 CO, 3 CO for plug-in sockets
K, L, D, KL, KD, LD, KLD - in relays R15 - 4 CO for plug-in sockets
K, L, KL - in relays RUC
L - in relays RUC-M
TEST BUTTONS
type T
orange
AC coils
green
DC coils
264
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Test buttons (no latching) and plugs
Test buttons are recommended for R2...WT, R3...WT, R4...WT, R15...WT 2 CO, R15...WT 3 CO relays - for appli­
cations that do not allow permanent contact latching. By manual operation (pressing the button) relay contacts
can get switched for as long time as long the button is pressed. Contacts return to initial position as soon as pressure
is released from the button. Those operations can be done while the coil is deenergized.
Button R4P-0001 or R15-M404 can be easily inserted by
the Customer after removal of button type T (see Fig. 2).
Button type T can be removed with screwdriver as shown
on Fig. 1.
Fig. 1
Dimensions - test button R4P-0001
for relays R2...WT, R3...WT, R4...WT
Types of buttons:
R4P-0001-A - orange colour (AC coils)
R4P-0001-D - green colour (DC coils)
Fig. 2
Dimensions - test button R15-M404
for relays R15...WT - 2 CO, 3 CO
Types of buttons:
R15-M404-A - orange colour (AC coils)
R15-M404-D - green colour (DC coils)
Plugs R4W-0003 or R15-M203 can substitute button type T if manual operation (latching and testing) is not
allowed. Changing button type T for plug can be done by Customer themselves in the same way as changing button
type T for button (no latching).
Dimensions - plug R4W-0003
for relays R2...WT, R3...WT, R4...WT
Types of plugs:
R4W-0003-A - orange colour (AC coils)
R4W-0003-D - green colour (DC coils)
Dimensions - plug R15-M203
for relays R15...WT - 2 CO, 3 CO
Types of plugs:
R15-M203-A - orange colour (AC coils)
R15-M203-D - green colour (DC coils)
265
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets and accessories availability index
The relays not specified in the table are designed for other manners of mounting.
Type of relay
Plug-in sockets
Screw terminals
on panel mounting
35 mm rail mount
acc. to PN-EN 60715
Spring
terminals
–
PI6W-1P
–
–
RM84
(GZT80, GZM80 ❷),
GZS80 ❸
(GZT80, GZM80 ❷),
GZS80 ❸
GZMB80 ❹
(EC 50, PW80,
GD50 ❺)
RM85, RM85 inrush,
RM85 105 °C sensitive
(GZT80, GZM80 ❷),
GZS80 ❸
(GZT80, GZM80 ❷),
GZS80 ❸
GZMB80 ❹
(EC 50, PW80,
GD50 ❺)
RMB841, RMB851
(GZT80, GZM80 ❷),
GZS80 ❸
(GZT80, GZM80 ❷),
GZS80 ❸
GZMB80 ❹
(EC 50, PW80,
GD50 ❺)
RM87N, RM87N sensitive
(GZT92, GZM92 ❷),
GZS92 ❸
(GZT92, GZM92 ❷),
GZS92 ❸
–
(EC 35, GD35 ❺)
RM87L, RM87L sensitive
(GZT80, GZM80 ❷),
GZS80 ❸
(GZT80, GZM80 ❷),
GZS80 ❸
GZMB80 ❹
(EC 50, PW80,
GD50 ❺)
RM87P, RM87P sensitive
(GZT80, GZM80 ❷),
GZS80 ❸
(GZT80, GZM80 ❷),
GZS80 ❸
GZMB80 ❹
(EC 50, PW80,
GD50 ❺)
ES 32
ES 32
–
–
RM83
–
–
–
(EC 50, PW80,
GD50 ❺)
RM92
–
–
–
(EC 35, GD35 ❺)
RM94
–
–
–
(EC 50, PW80,
GD50 ❺)
R2
(GZT2, GZM2 ❻)
(GZT2, GZM2 ❻)
GZMB2 ❾
SU4/2D ❿
R3
GZT3, GZM3
GZT3, GZM3
–
–
R4
(GZT4, GZM4 ❻)
GZ4 ❼, GS4 ❽
(GZT4, GZM4 ❻)
GZ4 ❼, GS4 ❽
GZMB4 ❾
SU4D ❿
RY2
GZY2G
GZY2G
–
–
R2M
GZ2 ❶
GZ2 ❶
–
S2M ❷
R15 - 2 CO
PZ8 ❸,
GZ8 ❹,
GZS8, GZP8 ❺
PZ8 ❸,
GZU8 ❹,
GZS8, GZP8 ❺
–
–
R15 - 3 CO
(PS11, PZ11 ❸),
GZ11 ❹,
GZS11, GZP11 ❺
(PS11, PZ11 ❸),
GZU11 ❹,
GZS11, GZP11 ❺
–
–
R15 - 4 CO
GZ14, GZ14Z
GZ14U
–
–
GUC11
GUC11
–
–
GZT4, GZM4 ❼
GZT4, GZM4 ❼
GZMB4 ❼
–
For PCB
Miniature relays
RM699BV, RSR30 ❶
RM96 1 CO
Miniature industrial relays
Industrial relays of small dimensions
RUC faston 4,8x0,5, RUC-M
Time relays
T-R4
❶ Solid state relays RSR30 type - see catalogue ”Solid state relays” and www.relpol.com.pl ❷ For sockets GZT80, GZT92, GZM80, GZM92 apply retainer /
retractor clips GZT80-0040 or spring wire clips GZM80-0041 and description plates GZT80-0035 ❸ For sockets GZS80, GZS92 apply retainer / retractor clips
❹ For sockets GZMB80 apply retainer / retractor clips GZMB80-0040 or spring wire
GZS-0040 or spring wire clips GZM80-0041 and description plates TR
clips GZM80-0041 and description plates TR. For sockets GZMB80 not applicable interconnection strips ZGGZ80 ❺ For sockets EC 35, EC 50, GD35, GD50
apply: plastic clips MP16-2, MP25-2; spring wire clips MH16-2, MH25-2, GD-0025, RM81-0001. For sockets GD35, GD50 apply also spring wire clips GD-0016.
❻ For sockets GZT2, GZT4, GZM2, GZM4 apply retainer / retractor clips
For sockets PW80 apply spring wire clips MH16-2, MH25-2, GD-0025, RM81-0001
❼ For sockets GZ4 apply spring wire clips G4 1052 ❽ For sockets GS4 apply
GZT4-0040 or spring wire clips G4 1052 and description plates GZT4-0035
❾For sockets GZMB2, GZMB4 apply retainer / retractor clips GZMB4-0040 or spring wire clips
spring wire clips GS4-0036 and description plates GS4-0035
G4 1052 and description plates TR. For sockets GZMB2, GZMB4 not applicable interconnection strips ZGGZ4❿ For sockets SU4/2D, SU4D, SU4/2L, SU4L,
G4/2, G4 apply spring wire clips G4 1053, G4 1050. For sockets SU4/2L, SU4L apply also spring clamps G4 1040
266
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets and accessories availability index
Relays mounting options are specified in the table, pages 4-5.
Sockets
Accessories
Solder terminals
Retainer / retractor clips
Spring wire clips
Description plates
Additional features
–
–
–
PI6W-1246
ZG20
–
GZT80-0040 ❷, GZS-0040 ❸,
GZMB80-0040 ❹
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸ ❹
M..., ZGGZ80 ❹
–
GZT80-0040 ❷, GZS-0040 ❸,
GZMB80-0040 ❹
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸ ❹
M..., ZGGZ80 ❹
–
GZT80-0040 ❷, GZS-0040 ❸,
GZMB80-0040 ❹
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸ ❹
ZGGZ80 ❹
–
GZT80-0040 ❷, GZS-0040 ❸
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸
M..., ZGGZ80
–
GZT80-0040 ❷, GZS-0040 ❸,
GZMB80-0040 ❹
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸ ❹
M..., ZGGZ80 ❹
–
GZT80-0040 ❷, GZS-0040 ❸,
GZMB80-0040 ❹
GZM80-0041 ❷ ❸ ❹,
(MP16-2, MH16-2, GD-0016 ❺)
GZT80-0035 ❷,
TR ❸ ❹
M..., ZGGZ80 ❹
–
MS 16, GZMB80-0040
GZM80-0041
TR
M..., ZGGZ80
–
–
(MP25-2, MH25-2, GD-0025,
RM81-0001 ❺)
–
–
–
–
(MP25-2, MH25-2, GD-0025,
RM81-0001 ❺)
–
–
–
–
(MP25-2, MH25-2, GD-0025,
RM81-0001 ❺)
–
–
SU4/2L, G4/2 ❿
GZT4-0040 ❻,
GZMB4-0040 ❾
G4 1052 ❻ ❼ ❾,
(G4 1053, G4 1050 ❿)
GZT4-0035 ❻,
TR ❾
M..., ZGGZ4 ❾,
R4P-0001, R4W-0003
–
GZT4-0040
G4 1052
GZT4-0035
M..., ZGGZ4,
R4P-0001, R4W-0003
SU4L, G4 ❿
GZT4-0040 ❻,
GZMB4-0040 ❾
G4 1052 ❻ ❼ ❾, GS4-0036 ❽,
(G4 1053, G4 1050 ❿)
GZT4-0035 ❻,
GS4-0035 ❽, TR ❾
M... ❼, ZGGZ4 ❾,
R4P-0001, R4W-0003
–
–
–
–
–
G2M ❷
–
GZ2 1060 ❶, G4 1050 ❷
–
–
GOP8 ❻
–
PZ11 0031 ❸,
(GZ 1050, GZU 1052 ❹),
GZP-0054 ❺, R159 1051 ❻
GZP-0035 ❺
R15-M404, R15-M203,
T(COM3) ❺
PZ11 0031 ❸,
(GZ 1050, GZU 1052 ❹),
GZP-0054 ❺, R159 1051 ❻
GZP-0035 ❺

R15-M404, R15-M203,
T(COM3) ❺

GOP11 ❻
–


GOP14 ❻
–
GZ14 0737 , R15 0736 ❻
–
–
–
–
MBA
–
–
–
–
TR4-2000
GZT4-0035, TR ❼
ZGGZ4 ❼
❶ For sockets GZ2 apply spring wire clips GZ2 1060 and spring clamps GZ2 1111 ❷ For sockets S2M, G2M apply spring wire clips G4 1050. For sockets G2M
❸ For sockets PZ8, PS11, PZ11 apply spring wire clips PZ11 0031 ❹ For sockets GZ8, GZ11 apply spring wire clips
apply also spring clamps G2M 1020
❺ For sockets GZP8, GZP11 apply spring wire clips GZP-0054, description plates
GZ 1050. For sockets GZU8, GZU11 apply spring wire clips GZU 1052
GZP-0035 and time modules T(COM3) ❻ For sockets GOP8, GOP11 apply spring wire clips R159 1051 and spring clamps R15 5922. For sockets GOP14 apply
spring wire clips R15 0736 and spring clamps R15 5922 ❼For sockets GZT4, GZM4 apply description plates GZT4-0035. For sockets GZMB4 apply description
plates TR. For sockets GZMB4 not applicable interconnection strips ZGGZ4
267
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets technical data
Type
Terminals
Signs credits
Insulation (PN-EN 60664-1)
Dielectric strength
50/60 Hz, 1 min.
Rated load
between
coil and contacts
pole - pole
6 A / 300 V AC
4 000 V AC
–
For RM699BV, RSR30 ❶
PI6W-1P
screw terminals
cUus, VDE, CE
For RM84, RMB841, RM85, RM85 inrush, RM85 105 °C sensitive, RMB851, (RM87L, RM87P ❷)
GZT80
screw terminals
Uus, CSA, CE
12 A / 300 V AC
5 000 V AC
3 000 V AC
GZM80
screw terminals
cUus, CSA CE
12 A / 300 V AC
5 000 V AC
3 000 V AC
GZS80
screw terminals
cUus, CE
10 A / 300 V AC
4 000 V AC
2 500 V AC
GZMB80
spring terminals
cUus
10 A / 300 V AC
4 000 V AC
4 000 V AC
For RM84, RMB841, RM85, RM85 inrush, RM85 105 °C sensitive, RMB851, (RM87L, RM87P ❷), RM83, RM94
EC 50
for PCB
8 A / 300 V AC
2 500 V AC
2 500 V AC
PW80
for PCB
8 A / 250 V AC
2 000 V AC
2 000 V AC
GD50
for PCB
U
8 A / 300 V AC
2 000 V AC
2 000 V AC
GZT92
screw terminals
cUus, CSA, CE
12 A / 300 V AC
5 000 V AC
–
GZM92
screw terminals
cUus, CSA, CE
12 A / 300 V AC
5 000 V AC
–
GZS92
screw terminals
cUus, CE
12 A / 300 V AC
4 000 V AC
–
12 A / 300 V AC
2 500 V AC
–
For RM87N ❸
For RM87N ❸, RM92
EC 35
for PCB
GD35
for PCB
U
12 A / 300 V AC
2 000 V AC
–
screw terminals
CE
12 A / 300 V AC
2 500 V AC
–
12 A / 300 V AC
2 500 V AC
–
Do RM96 1 CO
ES 32
For miniature relays
EC 32
for PCB
For R2
GZT2
screw terminals
cUus, CSA, CE
12 A / 300 V AC
3 000 V AC
3 000 V AC
GZM2
screw terminals
cUus, CSA, CE
12 A / 300 V AC
4 000 V AC
3 000 V AC
GZMB2
spring terminals
U, CSA
10 A / 300 V AC
4 000 V AC
4 000 V AC
SU4/2D
for PCB
cUus, CSA
12 A / 250 V AC
2 500 V AC
2 500 V AC
SU4/2L
solder terminals
cUus, CSA, CE
12 A / 250 V AC
2 500 V AC
2 500 V AC
G4/2
solder terminals
cUus, CSA, CE
12 A / 250 V AC
2 500 V AC
2 500 V AC
GZT3
screw terminals
cUus, CSA, CE
10 A / 300 V AC
3 000 V AC
3 000 V AC
GZM3
screw terminals
cUus, CSA, CE
10 A / 300 V AC
4 000 V AC
3 000 V AC
For R3
❶ Solid state relays RSR30 type - see catalogue ”Solid state relays” and www.relpol.com.pl
❷ Also RM87L sensitive, RM87P sensitive
❸ Also RM87N sensitive
268
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets technical data
General data
Connections (mounting)
Weight
Ambient
temperature
(operating)
Protection
category
(PN-EN 60529)
Max. cross section
of the cables
(stranded)
Length
of the cable
deinsulation
Max. tightening
moment for
the terminal
1
40 g
-40...+55 °C
IP 20
1 x 2,5 / 2 x 1,5 mm2
9 mm
0,3 Nm
2
41 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
2
46 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
2
37 g
-40...+85 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,5 Nm
2
41,8 g
-25...+85 °C
IP 20
1 x 0,2...1,5 mm2
9...11 mm
–
2
4g
-40...+85 °C
–
–
–
–
2
4g
-40...+85 °C
–
–
–
–
2
4g
-40...+85 °C
–
–
–
–
1
35 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
1
40 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
1
33 g
-40...+85 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,5 Nm
1
4g
-40...+85 °C
–
–
–
–
1
4g
-40...+85 °C
–
–
–
–
1
37 g
-40...+85 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,5 Nm
1
4g
-40...+85 °C
–
–
–
–
2
52 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
2
68 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
2
65 g
-25...+85 °C
IP 20
1 x 0,2...1,5 mm2
9...11 mm
–
2
6g
-40...+70 °C
–
–
–
–
2
6g
-40...+70 °C
–
2 x 0,75 mm2
–
–
2
6g
-40...+70 °C
–
2 x 0,75 mm2
–
–
3
60 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
3
68 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
Number
of poles
269
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Plug-in sockets technical data
Type
Terminals
Signs credits
Insulation (PN-EN 60664-1)
Dielectric strength
50/60 Hz, 1 min.
Rated load
between
coil and contacts
pole - pole
For R4, T-R4
GZT4
screw terminals
cUus, CSA, CE
6 A / 300 V AC
3 000 V AC
3 000 V AC
GZM4
screw terminals
cUus, CSA, CE
6 A / 250 V AC
4 000 V AC
3 000 V AC
GZMB4
spring terminals
U, CSA
10 A / 300 V AC
4 000 V AC
4 000 V AC
GZ4
screw terminals
CE
10 A / 300 V AC
2 500 V AC
2 000 V AC
GS4
screw terminals
cUus, CE
6 A / 250 V AC
2 500 V AC
2 000 V AC
SU4D
for PCB
cUus, CSA
6 A / 250 V AC
2 500 V AC
2 000 V AC
SU4L
solder terminals
cUus, CSA, CE
6 A / 250 V AC
2 500 V AC
2 000 V AC
G4
solder terminals
cUus, CSA, CE
6 A / 250 V AC
2 500 V AC
2 000 V AC
screw terminals
CE
12 A / 250 V AC
2 000 V AC
2 000 V AC
GZ2
screw terminals
CE
7 A / 250 V AC
2 000 V AC
2 000 V AC
S2M
for PCB
cUus
5 A / 250 V AC
2 000 V AC
2 000 V AC
G2M
solder terminals
cUus, CE
5 A / 250 V AC
2 000 V AC
2 000 V AC
PZ8
screw terminals
U, CSA, CE
10 A / 250 V AC
2 500 V AC
2 500 V AC
GZU8
screw terminals
U, CSA, CE
10 A / 300 V AC
2 500 V AC
2 500 V AC
GZ8
screw terminals
CSA, CE
10 A / 300 V AC
2 500V AC
2 500 V AC
GZS8
screw terminals
CE
10 A / 300 V AC
2 000 V AC
2 000 V AC
GZP8
screw terminals
cUus, CE
12 A / 300 V AC
4 000 V AC
2 500 V AC
GOP8
solder terminals
CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
PS11
screw terminals
U, CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
PZ11
screw terminals
U, CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZU11
screw terminals
U, CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZ11
screw terminals
CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZS11
screw terminals
CE
10 A / 300 V AC
2 000 V AC
2 000 V AC
GZP11
screw terminals
cUus, CE
12 A / 300 V AC
2 500 V AC
2 000 V AC
GOP11
solder terminals
CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZ14U
screw terminals
CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZ14
screw terminals
CSA, CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GOP14
solder terminals
CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
GZ14Z
screw terminals
CE
10 A / 250 V AC
2 000 V AC
2 000 V AC
CE
16 A / 250 V AC
2 000 V AC
2 000 V AC
For R4
For RY2
GZY2G
For R2M
For R15 - 2 CO
For R15 - 3 CO
For R15 - 4 CO
For RUC faston 4,8 x 0,5, RUC-M
GUC11
screw terminals
270
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Plug-in sockets technical data
General data
Connections (mounting)
Weight
Ambient
temperature
(operating)
Protection
category
(PN-EN 60529)
Max. cross section
of the cables
(stranded)
Length
of the cable
deinsulation
Max. tightening
moment for
the terminal
4
64 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
4
74 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,7 Nm
4
75 g
-25...+85 °C
IP 20
1 x 0,2...1,5 mm2
9...11 mm
–
4
40 g
-40...+70 °C
IP 20
2 x 1,5 mm2
7 mm
0,7 Nm
4
40 g
-40...+70 °C
IP 20
2 x 1,5 mm2
7 mm
0,7 Nm
4
7g
-40...+70 °C
–
–
–
–
4
7g
-40...+70 °C
–
–
–
–
4
8g
-40...+70 °C
–
2 x 0,75 mm2
–
–
2
54 g
-25...+55 °C
IP 20
2 x 2,5 mm2
7 mm
0,7 Nm
2
35 g
-40...+70 °C
IP 00
2 x 2,5 mm2
7 mm
0,7 Nm
2
8g
-40...+70 °C
–
–
–
–
2
8g
-40...+70 °C
–
–
–
–
2
55 g
-40...+70 °C
IP 20
2 x 2,5 mm2
7 mm
0,7 Nm
2
70 g
-40...+70 °C
IP 00
2 x 2,5 mm2
9,5 mm
0,7 Nm
2
80 g
-40...+70 °C
IP 00
2 x 2,5 mm2
9,5 mm
0,7 Nm
2
32 g
-40...+70 °C
IP 00
2 x 2,5 mm2
7 mm
1,0 Nm
2
50 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,5 Nm
2
25 g
-40...+70 °C
–
–
–
–
3
55 g
-40...+70 °C
IP 20
2 x 2,5 mm2
7 mm
0,7 Nm
3
55 g
-40...+70 °C
IP 20
2 x 2,5 mm2
7 mm
0,7 Nm
3
70 g
-40...+70 °C
IP 00
2 x 2,5 mm2
9,5 mm
0,7 Nm
3
80 g
-40...+70 °C
IP 00
2 x 2,5 mm2
9,5 mm
0,7 Nm
3
46 g
-40...+70 °C
IP 00
2 x 2,5 mm2
7 mm
1,0 Nm
3
55 g
-40...+70 °C
IP 20
2 x 2,5 mm2
6,5 mm
0,5 Nm
3
27 g
-40...+70 °C
–
–
–
–
4
120 g
-40...+70 °C
IP 20
2 x 2,5 mm2
9,5 mm
0,7 Nm
4
120 g
-40...+70 °C
IP 20
2 x 2,5 mm2
9,5 mm
0,7 Nm
4
35 g
-40...+70 °C
–
–
–
–
4
120 g
-40...+55 °C
IP 00
2 x 2,5 mm2
9,5 mm
0,7 Nm
3
75 g
-40...+70 °C
IP 00
2 x 2,5 mm2
9 mm
0,7 Nm
Number
of poles
271
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Notes
You have not found the relay you wanted? The catalogue does not show
the information about the switching capacity for the type of load you are looking for?
Detailed contact data is presented on the last page of the catalogue
and at www.relpol.com.pl
272
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
Notes
273
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
www.relpol.com.pl
Trade offer of Relpol S.A.
subminiature
and miniature relays
industrial and
installation relays
interface relays
NEED –
programmable relays
time relays
monitoring relays
solid state relays
plug-in sockets
for relays
contactors, thermal
overload relays
softstarts
motor protection
circuit breakers
power supply
overvoltage arresters
SZR – automation
modules
SMP – radiation
portal monitors
CZIP-PRO –
protection relays
274
www.relpol.com.pl
Export Sales Department phone +48 68 47 90 832, 951 • e-mail: [email protected]
RoHS - declaration of conformity
Declaration of conformity RoHS
RELPOL S.A.
ul. 11 Listopada 37
68-200 ¯ary, Poland
Relpol S.A. hereby confirms that
relays and plug-in sockets for relays
supplied by our company meet
the requirements of the Directive
2002/95/EC - RoHS
and 2011/65/EU - RoHS2.
11.07.2012
Date
Quality and Environmental
Management
Department Director
Andrzej Hyska
The offer of Relpol S.A. includes the following products:
subminiature signal relays
rated switching capacity: from 1 A to 3 A, coil voltage range: from 3 V to 48 V DC
miniature relays
rated switching capacity: from 5 A to 20 A
industrial relays
rated switching capacity: from 5 A to 48 A, mounting: to plug-in sockets
on 35 mm rail mount acc. to PN-EN 60715 or on panel mounting, for PCB
interface relays
rated switching capacity: from 0,5 A to 16 A, number of contacts: from 1 to 4
plug-in sockets for relays
for PCB, for 35 mm rail mount acc. to PN-EN 60715 or on panel mounting
contactors
rated switching power: from 2,2 kW to 200 kW /at 400 V/
motor protection circuit breakers
setting range: from 0,1 A to 63 A
time relays
single- and multifunction time relays, wide range of time adjustments
monitoring relays
monitoring of current, voltage, temperature, level
Due to the permanent development policy, Relpol
S.A. reserves the right to introduce changes of data
and characteristics of the products. The devices
shall be operated by skilled personnel in accor­
dance with the regulations in force pertaining to
electrical systems. The technical data are of infor­
mational nature. Thus, Relpol S.A. does not accept
any liability for inappropriate use of the presented
products.
PRECAUTIONS
1. Ensure that the parameters of the product descri­
bed in its specification provide a safety margin for
the appropriate operation of the device or system
and never use the product in circumstances which
exceed the parameters of the product.
2. Never touch any live parts of the device.
3.Ensure that the product has been connected
correctly. An incorrect connection may cause mal­
function, excessive heating or risk of fire.
4. In case of any risk of any serious material loss or
death or injuries of humans or animals, the devices
or systems shall be designed so to equip them with
double safety system to guarantee their reliable
operation.
NEED programmable relays
versions: 8 inputs / 4 relay outputs, 16 inputs / 8 relay outputs, with LCD display,
without LCD display, supply voltages: 12 V DC, 24 V DC, 220 V DC, 230 V AC,
programming: LAD, STL, LED indicators of the relay and input / output status
DIN rail power supply
for automation systems, output circuit: 12 V DC, 24 V DC, rated currents: from 1,5 A to 20 A
solid state relays
rated load currents: from 1 A to 100 A, switching at zero or at any time
overvoltage arresters
classes I, II and III, available with changeover signal contact
CZIP-PRO protection relays
digital protection, automation, measurement, control and communication system
for MV switchgears
SMP system
radiation portal monitors
.pl
ww
RELPOL S.A.
ul. 11 Listopada 37
68-200 ¯ary, Poland
e-mail: [email protected]
www.relpol.com.pl
Export Sales Department
Phone +48 68 47 90 832, 951
Fax
+48 68 47 90 837
e-mail: [email protected]
Marketing Department
e-mail: [email protected]
04/2013
l.com
w.relpo
Relays
Catalogue 2013 - 2014
www.relpol.com.pl
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement