VDAS - Altram
VADT/VADR14100WDM SERIES
PRODUCT SPECIFICATION
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/
2 DATA CHANNELS AND REVERSE SYNC
FEATURES
• 10-Bit Digitally Encoded Video Transmission
V
• Exceeds RS-250C Short-Haul Transmission
• NTSC, PAL, SECAM Compatible
A
• Full Color Compatibility
• 20-Bit Digitally Encoded Stereo Audio
DESCRIPTION
• 600 Ohm Impedance Line-Level Audio
The IFS VADT/VADR14100WDM series video transceivers
support simultaneous broadcast quality transmission of 10-bit
digitally encoded video, 20-bit digitally encoded stereo audio,
bi-directional data transmission, and Genlock over one single-mode or
multimode optical fiber. The modules are universally compatible with
major CCTV camera manufactures and support RS-232, RS-422, and
2-wire or 4-wire RS-485 data interfaces and all major data protocols.
Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Each transceiver incorporates status
indicating LED’s for monitoring of proper system operation. The
modules are available in either stand-alone or rack mount versions.
• Distance Learning CCTV with PTZ Control & 2-way Audio
Communications
D
• Reverse Sync for Genlock
• LED Status Indicators For Monitoring All Critical
Operating Parameters
S
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses
on all Power Lines
APPLICATION EXAMPLES
• ITS (Intelligent Transportation Systems)
• No In-field Electrical or Optical Adjustments Required
Available at:
www.
• Distances up to 49 Miles (78 km)
• Lifetime Warranty
.com
• A & E Specifications, (CSI)
• AutoCAD Drawings
• Operation Manuals
• Technical Bulletins
ORDERING INFORMATION
PART
NUMBER
MULTIMODE
62.5/125µm**
SINGLE-MODE
9/125µm
OPTIONS
DESCRIPTION
OPTICAL
FIBERS
REQUIRED PWR BUDGET
MAX.
DISTANCE*
VADT14120WDM
VADR14120WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/1550 nm)
Video Receiver & Audio Receiver/Data Transceiver (1550/1310 nm)
1
VADT14130WDM
VADR14130WDM
Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm)
Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
23 dB
43 miles (69 km)
VADT14130WDMHP Video Transmitter & Audio Transceiver/Data Transceiver (1310/ 1550 nm)
VADR14130WDMHP Video Receiver & Audio Receiver/Data Transceiver (1550/ 1310 nm)
1
26 dB
49 miles (78 km)
13 dB @ 1550 nm
3.6 miles (6 km)
13 dB @ 1310 nm
PS-12VDC 12 Volt DC Plug-in Power Supply (Included)
PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order)
Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately)
Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory)
Add ‘-SC’ for SC Connector
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
International Fiber Systems, Incorporated ■ DESIGN CENTER (888) 999-9IFS or (203) 426-1180
FAX (203) 426-3326 ■ [email protected]
Europe, Middle East, Africa TEL +44(0) 1732 522 777 ■ Asia Pacific TEL +65 6235 2661
Australia TEL +61 2 9836 0600 ■ Latin America TEL (512) 477-8787
VADT/VADR14100WDM SERIES
TECHNICAL SPECIFICATION
DIGITALLY ENCODED VIDEO WITH BI-DIRECTIONAL STEREO AUDIO/
2 DATA CHANNELS AND REVERSE SYNC
SPECIFICATIONS
CONNECTORS
Power:
Audio and Data:
Video:
Optical:
Video and Reverse
Sync (Genlock):
VIDEO
Video Input:
Video Bandwidth:
Differential Gain:
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<2%
<0.7°
<1%
>67 dB
Terminal Block with Screw Clamps
DB 25 Connector
BNC (Gold Plated Center-Pin)
ST, SC or FC (see ordering information)
BNC (Gold-Plated Center Pin)
ELECTRICAL & MECHANICAL
DATA
Data Interface:
Power:
Surface Mount:
Rack:
Number of Rack Slots:
Current Protection:
RS-232, RS-422 ,or 4 wire RS-485
with Tri-State
NRZ, NRZI, Manchester, Bi-phase
DC-100 kbps (NRZ)
Simplex or Full-Duplex
Data Format:
Data Rate:
Operating Mode:
Circuit Board:
Size (in./cm.) (LxWxH)
Surface Mount:
Rack Mount:
Shipping Weight:
AUDIO
No. of Bits:
Sampling Rate:
Bandwidth:
Maximum Input/Output Level:
Signal-to-Noise Ratio (SNR):
Total Harmonic Distortion:
DTE/DCE Interface:
Channel Crosstalk:
Input/Output:
20
52.3 KHz
20 Hz to 18 KHz @ -1 dB
0 dBm across 600 ohms
87 dB, Min.
0.01% @ 0 dB Output Level
User-Selectable
-100 dB at 1 KHz
Balanced or Unbalanced, 600 ohm
WAVELENGTH
1310/1550 nm, Multimode
1310/1550 nm, Single-mode
NUMBER OF FIBERS
1
12 VDC @ 500 mA
From Rack
2
Automatic Resettable Solid-State Current
Limiters
Meets IPC Standard
7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm
7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
< 2 lbs./0.9 kg
ENVIRONMENTAL
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
† May be extended to condensation conditions by adding suffix ‘–C’ to model
number for conformal coating.
LED INDICATORS
VADT Transmitter Unit:
VADR Receiver/ Data Transceiver Unit:
• Video Input Sync Presence (Bi-Color LED)
• Data Transmit
• Data Receive
• Analog-to-Digital Converter Overload (Bi-Color LED)
• Optical Carrier Detect/Line-Lock (Bi-Color LED)
• Operating Power
• Video Output Sync Presence (Bi-Color LED)
• Data Transmit
• Data Receive
• Analog-to-Digital Converter Overload (Bi-Color LED)
• Optical Carrier Detect/Line-Lock (Bi-Color LED)
• Operating Power
MADE IN THE USA
OPTICAL POWER BUDGET
FIBER
WAVELENGTH
Multimode
62.5/125µm**
TRANSMITTER
MODEL
OUTPUT
VADT14120WDM
1310/1550 nm
Single-mode
9/125µm
VADT14130WDM
VADT14130WDMHP
RECEIVER
SENSITIVITY
MODEL
200 µw VADR14120WDM
(-7 dBm)
400 µw
(-4 dBm)
OPTICAL
PWR BUDGET
MAX.
DISTANCE*
13 dB @ 1550 nm
13 dB @ 1300 nm
3.6 miles (6 km)
23 dB
43 miles (69 km)
26 dB
49 miles 78 km)
2 µw
(-27 dBm)
VADR14130WDM
800 µw VADR14130WDMHP
* Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. ** For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
SYSTEM DESIGN
up to 49 miles
(78 km)
To External
Genlock
VADT14130WDMHP
Video
(Coax)
ifs
SYNC
VADR14130WDMHP
International
ifs
Fiber
Systems
Incorporated
203.426.1180
Video
(Coax)
International
Fiber
Systems
Incorporated
203.426.1180
1 Fiber
9/125µm MM
P/T/Z Data
Audio
Pre-Amp
Control
Data
Control
Data
Audio
Pre-Amp
Keyboard
Amp/Speaker
Amp/Speaker
TEL (203)426-1180 ■ FAX (203)426-3326 ■ www.ifs.com ■ [email protected]
16 Commerce Road ■ Newtown, CT 06470
Due to our continued effort to advance technology, product specifications are subject to change without notice.
05/29/03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement