L16RN-SL H1480

L16RN-SL H1480
L16RN-SL
H1480
L16RN-SL is a 5” High Fidelity woofer with an injection moulded metal chassis,
specially designed in cooperation with Linkwitz Labs in Corte Medera, California.
Stiff, yet light aluminum cone and low loss rubber surround show no sign of the
familiar 500-1500 Hz cone edge resonance and distortion assosiated with soft cones.
A bumped back plate in the magnet system, together with the very long and light
weight copper clad aluminum voice coil, allow extreme coil excursion with low
distortion.
A heavy copper ring below the T-shaped pole piece, to reduce non linear and modulation distortion.
Extremely stiff and stable injection moulded metal basket, keeps the critical components in perfect alignment. Large windows in the basket both above and below the
spider reduce sound reflection, air flow noise and cavity resonance to a minimum.
This driver uses Seas SpiderRing® technology.
100
50
95
90
40
SPL [dB]
80
30
75
20
70
65
Impedance [ohm]
85
10
60
55
50
10
0
100
1 000
10 000
Frequency [Hz]
The frequency responses above show measured free field sound pressure in 0, 30, and 60 degrees angle using a 10L closed box. Input
2.83 VRMS, microphone distance 0.5m, normalized to SPL 1m.The dotted line is a calculated response in infinite baffle
based on the parameters given for this specific driver. The impedance is measured in free air without baffle using a 2V
sine signal.
Nominal Impedance
8 Ohms
Voice Coil Resistance
6.0 Ohms
Recommended Frequency Range
45 - 2000 Hz
Voice Coil Inductance
0.64 mH
Short Term Power Handling *
250 W
Force Factor
6.1 N/A
Long Term Power Handling *
80 W
Free Air Resonance
37 Hz
Characteristic Sensitivity (2,83V, 1m) 84 dB
Moving Mass
14.7 g
Voice Coil Diameter
Air Load Mass In IEC Baffle
0.62 g
39 mm
Voice Coil Height
18 mm
Suspension Compliance
1.3 mm/N
Air Gap Height
6 mm
Suspension Mechanical Resistance
1.38 Ns/m
Linear Coil Travel (p-p)
12 mm
Effective Piston Area
104 cm2
Maximum Coil Travel (p-p)
22 mm
VAS
19 Litres
Magnetic Gap Flux Density
0.88T
QMS
2.48
Magnet Weight
0.42 kg
QES
0.55
Total Weight
1.40 kg
QTS
0.45
Nov 2011
RoHS compliant product
*IEC 268-5
SEAS reserves the right to change technical data
www.seas.no
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement