LC4 Light controller
LC4 Light controller
The LC4 is a multifunctional wireless (ZigBee)
provides communication between the LC4 units and
INSIGHTNOW™ light controller, that can control any
the INSIGHTNOW™ platform. A single gateway can
ballast/driver based on 0-10V, DALI, PWM, DMX and/
connect up to 250 LC4 units.
or RELAY.
The LC4 detects error situations, measure energy
Ready for smart city
consumption, optional earth leakage, and
The Munisense INSIGHTNOW™ light engine is part of
controls the (dynamic) lighting autonomously or in
our Smart City vision, where light management is not
combination with the INSIGHTNOW™ platform. The
a separate application, but an integral part of smart
LC4 is fully remote controllable through the platform
cities.
or the ALIS interface.
After all, our INSIGHTNOW™ platform is the basis
for insight in and management of noise levels, air
Sensor inputs
quality, water levels, traffic, energy, indoor climate,
The LC4 has several direct sensor inputs. The sensor
security, etc.
may consist of a switching contact, direct-coupled
PIR or the advanced INSIGHTNOW™ TR4 motion
detector.
The LC4 can be equipped with an optional backup
battery that covers 48 hours, so the measurement
data is also available during the day (when no
power is available).
0-10V, DALI, PWM, DMX, RELAIS
Full remote control
Direct and wireless sensor support
The ZigBee protocol allows connecting multiple
external sensors. The sensor information can be
ZigBee standard
shared with other LC4’s, wirelessly configuring any
type of dynamic lighting.
Self-forming wireless network INSIGHTNOW™
The LC4 units implemented in the lighting network
automatically create a secure wireless network. The
light controllers can be hundreds of meters apart,
consequently covering kilometers. A gateway
Multiple security
ALiS standard
INSIGHTNOW™ light controller, IP67 housing
LC4A-SHKO
Controller interfaces
Active and passive control
Yes
0 / 1..10V
Active power
12 Volt
DALI
Maximum supply current
100 mA
Max. number of DALI slave devices
4
Tension *
12 Volt
PWM
Frequency *
100..1000 Hz
Resolution steps *
10.000
Standard *
DMX512
DMX
Channels *
8
Remote Device Management *
Yes
Type Solid State power *
350 W
Relay
Type Electro Mechanical *
1500 W
Dimmer control
Settlement
Linear/Logarithmic
Configurable dimming
100 ms .. 6000 s
Min-Max adjustment
Yes
Ballast
Constant lumen output
Yes
Registration operation hours
Yes
1 day, 8 times a day
Yes
Calendar
Calendar override option
2
Energy Measurement
Accuracy
2%
Energy
Kjoules
Power
Watt
Sensor inputs
Direct PIR sensors (3 V type)
2
External trigger contact
2
Munisense PD1 (via RS485) *
Yes
Via ZigBee network *
Yes
Time synchronization
Via ZigBee network
Yes
Astronomical time *
Yes
Retention time after power loss
62 hours
Power Fail Detection
Detection
Yes
Registration time power on/off
Yes
Environmental conditions
Temperature
-20 °C - 70 °C
Humidity
0 - 100%
Input Characteristics
Input AC
180 - 250 V
Input current
0,01A max
Security
2 kV DM, 2Kv CM
Energy
800 mW max
Wire Specification
Strong Flow **
0,4 .. 4 mm²
Low-voltage **
0,25 .. 1 mm²
Network
See: ***
Yes
Zigbee
Maximum distance between nodes
in “line-of-sight” conditions (meters)
100
LC4 in network
250
Standards and certificates
AND
55015,55022,610003-2,61547
RoHS
RoHS2
Dimensions and weight
120 x 65 x 42 mm
Dimensions Housing
Housing with attachment points
150 x 65 x 42 mm
(LxWxH)
250 grams
Weight
Backup power *
48 hours
Li-ion accu (backup time)
Earth leakage measurement and protection *
0..100 mA****
Measurement range
100 µA
Resolution
yes
Protection (reduce power)
LC4A-SHKO
About Munisense
Munisense develops, sells and manages highly
innovative real-time and online measurement and
control solutions for business and government.
Solutions that provide immediate insight in noise,
vibrations, water levels, energy use, lighting, water
and air quality and that allows effective control over
lighting levels, ventilation, and pump activity.
The INSIGHTNOW™ meters are connected to the
INSIGHTNOW™ cloud where the data is stored in
real-time for analysis, visualisation and reporting. The
information from the cloud can be viewed in a range
of specific visualisations any time, any where through
a web browser or using our phone or tablet apps.
Our applications are developed in close cooperation
with universities, governments, partners and
customers.
*Optional
** High voltage: 5 clamps (1-L, 2-L, 3-N, 4-Lout, 5-Lrelais)
** Low voltage: 8 clamps (1-010V + 2 DALI 3-GND, 4-PIR1, 5-PIR0, 6-3Volt,
7-RS485B, 8 RS48A)
*** ZR (router function), supported clusters (Basic, Power, Device Temperature,
Commissioning, Group Level Control, On/Off, Lighting Ballast, Scenes)
**** Other ranges on request
v 0.2
INSIGHTNOW
TM
Munisense BV
Fruitweg 36
2321 DH LEIDEN
The Netherlands
Tel. +31 (0)71-711 46 23
info@munisense.com
www.munisense.nl
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising