Sony | XA-NV300T | Reference Guide | Sony XA-NV300T Reference Guide

TomTom Nav Compatible
with Sony XAV/XNV-KIT
Reference Guide
Contents
Getting started
4
Start TomTom Nav Compatible with Sony XAV/XNV-KIT................................................................ 4
GPS reception ............................................................................................................................... 4
Planning a route
5
Planning a route ............................................................................................................................. 5
Route summary.............................................................................................................................. 8
Route information........................................................................................................................... 9
Other Drive to options .................................................................................................................... 9
Change route ............................................................................................................................... 10
Planning a route in advance ......................................................................................................... 10
Driving View
12
The Driving View .......................................................................................................................... 12
Moving around in the Driving View ............................................................................................... 12
Returning to the Driving View ....................................................................................................... 13
Setting the volume ....................................................................................................................... 13
Quick access toolbar .................................................................................................................... 13
Map settings ................................................................................................................................ 13
Advanced Lane Guidance
14
About Advanced Lane Guidance .................................................................................................. 14
Changing your route
15
Making changes to your route ...................................................................................................... 15
Travel via... .................................................................................................................................. 16
Settings
17
Settings ....................................................................................................................................... 17
Change home location ................................................................................................................. 17
Driving safety ............................................................................................................................... 17
Driving View ................................................................................................................................. 18
Voices.......................................................................................................................................... 18
Distance units .............................................................................................................................. 18
Map colours ................................................................................................................................. 19
Car symbol .................................................................................................................................. 19
Route planning............................................................................................................................. 19
Advanced settings........................................................................................................................ 20
About ........................................................................................................................................... 20
Main menu
21
The Main menu ............................................................................................................................ 21
Drive to menu .............................................................................................................................. 22
Returning to the Driving View ....................................................................................................... 22
2
View map
23
Viewing a map ............................................................................................................................. 23
Selecting items on the map .......................................................................................................... 23
Points of Interest (POIs)
25
About POIs .................................................................................................................................. 25
Driving to a POI............................................................................................................................ 25
Finding a POI on the map ............................................................................................................ 26
Showing POIs on the map............................................................................................................ 27
Selecting which POIs to show on the map .................................................................................... 28
Favourites
29
About Favourites .......................................................................................................................... 29
Creating a Favourite..................................................................................................................... 29
Using a Favourite ......................................................................................................................... 30
Changing the name of a Favourite................................................................................................ 30
Deleting a Favourite ..................................................................................................................... 30
Addendum
32
Copyright notices
33
3
Getting started
Start TomTom Nav Compatible with Sony XAV/XNV-KIT
Tap this button on your Sony XAV/XNV-KIT to start the TomTom Nav App.
When started, TomTom Nav App shows the Driving View.
Navigation
The language used for buttons and menus in TomTom Nav App is the same as the language you
selected in your Sony XAV/XNV-KIT settings. If you change the language you must park your car in a
safe place, turn off your car ignition and start your car again to see the new language.
Important: Stop your car in a safe place before your turn off the ignition.
Starting for the first time
When you start TomTom Nav App for the first time, you see the following screen:

Legal notice - You must read and agree to the Legal notice to be able to use TomTom Nav App.
Starting after a reset
When you start TomTom Nav App after a reset, you see the Legal notice. You must read and agree
to the Legal notice to be able to use TomTom Nav App.
GPS reception
When you first start TomTom Nav App, it may need a few minutes to find your GPS position and show
your current location on the map.
To make sure you have good GPS reception, you should use your device outdoors. Large objects
such as tall buildings can sometimes interfere with reception.
Important: TomTom Nav App cannot give you route instructions until it has received location data.
4
Planning a route
Planning a route
Important: In the interest of safety and to reduce distractions while you are driving, you should always
plan a route before you start driving.
To plan a route with TomTom Nav App, do the following:
1. Tap the screen to open the Main menu.
2. Tap Drive to.
Tip: When you use TomTom Nav App for the first time you are asked to choose a country.
3. Tap Address.
Tip: If you want to change the country, state or region, tap the flag before you select a city.
4. Start to type the name of the town you want to go to.
As you type, the names of the towns that match what you have typed are shown. When your destination appears in the list, tap the name of the town to set the destination.
5
Tip: You can also type in the postcode of your destination. First select the country, then select
the postcode from the list shown to display a list of streets in that postcode.
5. Start to type the name of the street.
Just as for place names, the names of the streets that match what you have typed are shown.
When your destination appears in the list, tap the name of the street to set the destination.
Tip: Hide the keyboard so you can see more results on the screen.
6. Enter the house number and then tap Next.
6
You can also select the point where two streets meet by tapping Crossing.
7. The destination is shown. Tap Select to accept the destination, or tap the back arrow to change
the destination.
8. The route is calculated and shown.
By default, the fastest route is planned. You can change the type of route used for planning.
If IQ Routes is available on your map, this information is used to plan the best possible route taking into account the real average speeds measured on the roads.
7
9. Tap Go!
TomTom Nav App starts to guide you to your destination using spoken instructions and on-screen
directions.
Route summary
After you plan a route, a summary of the route is shown.
The Route Summary screen shows an overview of your route on the map and the estimated travel
time including delays caused by busy roads.
The bottom of the Route Summary screen shows the following options:



Tap Change route to open the Change route menu. Here you can add Travel via stops and
change your route.
Tap Go! to start route guidance.
Tap Route details to open the Route information menu.
You can view the route summary at any time by tapping the arrival time panel on the right of the
Driving View.
8
Route information
Tap the arrival time panel on the right of the Driving View at any time to show the Route Information
screen.
Tap Route details on the Route Information screen to show the Route information menu. You see the
following options:
Tap this button for a list of all the turn instructions on the route.
Show route instructions
Tap this button to see an overview of the route using the map.
Show map of route
Tap the Show route demo button to watch a demo of the journey. To stop
a demo, tap the screen, then tap Yes.
Show route
demo
Show
destination
Tap this button to see a preview of your destination. Tap More... to show
more information about the location, to search for parking nearby or to add
the location to your Favourites.
Other Drive to options
When you tap Drive to in the Main menu, you can select your destination in the following ways:
Tap this button to plan a route to your Home location.
To set your Home location, tap Change home location in the Settings
menu.
Home
9
Tap this button to select a Favourite to drive to.
To add a favourite, tap Manage favourites in the Settings menu.
Favourite
Tap this button to enter an address or a postcode as your destination.
Address
Tap this button to select your destination from a list of places you have
recently used as destinations. These also include your Travel via stops.
Recent destination
Tap this button to navigate to a Point of Interest (POI).
Point of Interest
Tap this button to select a point on the map as your destination.
Point on map
Change route
Once you have planned a route, you may want to change something about the route, without changing
your destination. You may want to change the route for one or more of the following reasons:



You can see a roadblock or a line of traffic ahead.
You want to travel via a particular location to pick someone up, stop for lunch or fill up with petrol.
You want to avoid a difficult junction or a busy narrow street.
Planning a route in advance
You can use TomTom Nav App to plan a route in advance by selecting your starting point and your
destination.
You can use advanced route planning to check a route or the time it will take.
To plan a route in advance, do the following:
1. Tap the screen to open the Main menu.
10
2. Tap Advanced planning.
3. Select the starting point for your journey in the same way that you would select your destination.
4. Set the destination for your journey.
5. Choose the type of route that should be planned.

Fastest route - the route which takes the least time.

Eco route - the most fuel-efficient route.

Shortest route - the shortest distance between the locations you set. This may not be the
quickest route, especially if the shortest route is through a town or city.

Avoid motorways - a route which avoids motorways.

Walking route - a route designed for making the journey on foot.

Bicycle route - a route designed for making the journey on a bicycle.

Limited speed - a route based on a maximum speed. When you choose this type of route,
you enter a maximum speed. The route and estimated time of arrival are then planned based
on the speed that you entered.
6. Choose the date and time you want to start the journey you are planning. You can set the time in 5
minute intervals.
TomTom Nav App uses IQ Routes to work out the best possible route at that time, using the real
average speeds measured on roads. In this way you can compare how long a journey takes at
different times of day, or on different days of the week.
7. Tap Done. TomTom Nav App plans the route between the two locations you selected.
8. Tap Go! to return to the Driving View.
9. If you want to see a demonstration of your route, tap Route details on the Route Summary
screen, then tap Show route demo.
11
Driving View
The Driving View
1. The name of the next street on your route.
2. Your current position.
3. The remaining distance of your journey, the remaining journey time and the estimated arrival time.
Tap this area to open the Route Summary screen.
4. Tap this button to show the quick access toolbar.
5. Driving instruction for the road ahead and the distance to your next turning.
Tap this area to open the volume control and to repeat the previous instruction.
6. Your current speed and, if known, the speed limit at your current location. If you exceed the speed
limit this area appears red.
Moving around in the Driving View
When you plan a new route, you are shown the Driving View together with detailed information about
your current location.
Tap the centre of the screen at any time to open the Main menu.
12
Returning to the Driving View
To return to the Driving View at any time tap the return arrow in the top right corner of the screen:
To return to the previous screen tap the back arrow in the top left of the screen:
Setting the volume
Tap the driving instruction panel to show the volume control.
Move the slider from left to right to increase the volume of voices.
Move the slider all the way to the left to mute voices. When the sound is muted, the mute sound
indicator is shown in the driving instruction panel.
Quick access toolbar
Tap the quick access toolbar button to display the following options:
Tap this button to use a 2D map in the Driving View.
If the 2D map is being used, this button changes to a 2D symbol. Tap the
button again to use the 3D map.
Tap this button to switch off voice guidance. You will no longer hear spoken
route instructions but you will still hear information such as warnings.
If the voice is muted, this button changes to Enable Voice. Tap the button
again to turn voice instructions back on.
When voice instructions are disabled, the voice disabled indicator is shown
in the driving instruction panel.
Tap this button to use night colours on the menus and maps. If night colours
are being used, this button changes to a moon symbol. Tap the button again
to switch back to day colours.
Map settings
You can change the way the map looks and behaves as you drive, and change what you see on the
map.
13
Advanced Lane Guidance
About Advanced Lane Guidance
TomTom Nav App helps you prepare for motorway exits and junctions by showing you which lane you
should be in.
Note: Advanced Lane Guidance is not available for all junctions or in all countries.
For some exits and junctions, an image shows the lane you should be in. To turn the images off,
switch Show lane guidance images off in the Advanced Settings menu.
For other exits and junctions, TomTom Nav App shows the lane you should take in the driving instruction panel.
14
Changing your route
Making changes to your route
You can make changes to your planned route using the Change route menu.
You can open the route options as follows:
 Tap Change route in the Main menu.
Tip: Change route is only available when you have planned a route.
Change route


Tap Change route on the Route Summary screen after you plan a
route.
Tap the distance panel on the right side of the Driving View to open the
Route Summary screen, then tap Change route.
The following buttons are available in the Change route menu:
Tap this button to clear the currently planned route.
Clear route
Avoid roadblock
Tap this button if you can see a roadblock or a line of traffic ahead. You
then have to choose how much of the route ahead you want to avoid.
Choose from the different options available. TomTom Nav App recalculates
your route avoiding the section of the route for the distance you selected.
Don’t forget that once a new route is calculated, you may have to turn off
the road you are on very soon.
If the roadblock suddenly clears, tap Recalculate route to return to your
original route.
Calculate alternative
Tap this button to calculate an alternative to the current route.
Apart from the roads near your current position and near your destination, a
new route is calculated using totally different roads to reach your destination. This is an easy way of planning a different route to the same destination.
TomTom Nav App looks for another route from your current location to your
destination. When a route has been calculated you can tap Alternative
route to use the new route, or tap Previous route to use the original route.
If you decide later that you would prefer to use the original route after all,
use Recalculate route.
Tap this button to change your route so that it passes a particular location,
perhaps to pick someone up on the way. You can add up to four extra stops
along your route.
Travel via...
15
Avoid part of route
Tap this button to avoid a part of the route. Use this button if you see that
your route includes a road or junction you don’t like, or which is well-known
for traffic problems.
You then choose the road you want to avoid from a list of the roads on your
route.
Tap this button to recalculate the route using your existing route settings
and HD Traffic.
Recalculate
route
Travel via...
Travel via... lets you add up to four extra stops on your planned route.
Travel via...
Tap this button to add or change stops.
When have not yet entered a stop, the Travel via... menu opens.
When you have already entered a stop, the list of stops is shown. Tap Add
to open the Travel via... menu.
Choose the stop in the same way as you choose a destination. This means
you can select from all the same options that are offered when you choose
a destination, for example Address, Favourite, Point of Interest or Point
on map.
When you have added a stop it is shown in the Travel Via list.
If you want to change a stop tap it to open the information screen, which
shows the following options:
Tap this button to move the stop up in the list.
Move up
Tap this button to move the stop down in the list.
Move down
Switch on notification to get a voice message saying you are near the stop.
Switch on / Switch
off notification
Delete
Tap this button to delete the stop.
When you have added Travel Via stops, tap the Done button at the top of
the Travel via screen. TomTom Nav App calculates a new route to your
destination that passes through the stops you chose. A flag appears in the
Driving View at each of your Travel via stops. Unlike at your final destination, TomTom Nav App only gives a sound alert when you reach a Travel
via stop.
Tap Done. TomTom Nav App calculates a new route to your destination that passes the stops you
chose. Tap Go! to start driving. A flag appears in the Driving View at each of your Travel Via stops and
you get a voice message saying that you are near the stop.
16
Settings
Settings
To change the way TomTom Nav App looks and behaves, tap Settings in the Main menu.
Change home location
Change home
location
Tap this button to set or change your home location. Select the address for
your home location in the same way that you select a destination.
Your home location can be somewhere you often visit, such as your office.
This feature provides an easy way to navigate there by tapping the Home
button in the Drive to menu.
Driving safety
Tap this button to set the following warnings for places on your route.
Driving safety

Warn for schools and places of worship - Adjust this setting to warn you when you are driving
near a place of worship, a school, a college or a university. The warning is not given when you are
driving on a motorway, or between the hours of 20.00 and 06.00. The following icons appear in the
Driving View:
Driving near a place of worship.
Driving near a school.
Driving near a college or university.

Warn when driving faster than allowed - Adjust this setting to warn you when you are driving
above the speed limit.
You can select a warning alert sound for each warning.
17
Driving View
Tap this button to set the information that is shown on the map in the Driving
View. The following options are available:
Driving View
Show point of interest
This setting lets you choose which POIs are shown on the map. Tap Next to choose to show POIs in
2D and 3D driving views and maps.
Show street names on map
When this setting is on, street names are shown on the map.
Show next street name
When this setting is on, the next street name or number on your route is shown in the Driving View.
Show current street name
When this setting is on, the current street name or number on your route is shown in the Driving View.
Auto-Zoom in 2D and 3D modes
Auto-Zoom automatically adjusts the area of the map and level of detail shown in the Driving View.
Switch off Auto-zoom to manually control the use of zoom in the Driving View.
Voices
Tap this option to select the voice used for instructions.
Voices



Voice selection
Tap a voice to select it. When you select a voice, a sample of that voice is played.
You can choose from two different kinds of voices.

A basic voice reads the driving instructions but does not read the street names, road numbers
or signs.

An advanced voice gives driving instructions and pronounces street names, signs and status
messages. You can only use an advanced voice that is in the language your device uses. You
must select an advanced voice to be able to select the following options:
Read aloud road numbers
Read aloud street names
Distance units
Tap this button to use either Kilometres or Miles for all distances and
speeds.
Distance units
18
Map colours
Tap this button to change the map colours.
Map colours
Tap Change day colours to select a day colour scheme consisting of bright colours.
Tap Change night colours to select a night colour scheme consisting of darker colours.
Auto switch automatically changes between day and night colours depending on the time of day.
Car symbol
Tap Car symbol to select the car symbol that shows your current location in
the Driving View.
Car symbol
Route planning
Adjust the Route planning settings to set how routes are planned.
Route planning
Route type
Adjust this option to set the type of route that is planned when you plan a new route.
You can select the following types of route:








Always ask me - if you select this option, you are always asked to select the type of route that
should be planned.
Fastest route - the fastest route to your destination.
Shortest route - the shortest route to your destination. This may take much longer than the
fastest route.
Eco route - always plan the most fuel-efficient route.
Walking route - this type of route is optimised for walking.
Bicycle route - this type of route is optimised for bicycles.
Avoid motorways - this type of route avoids all motorways.
Limited speed - a route based on a maximum speed. When you choose this type of route, you
enter a maximum speed. The route and estimated time of arrival are then planned based on the
speed that you entered.
You can set how each of the following road types is handled when a new route is planned:




Toll roads
Ferry crossings
Carpool lanes - Carpool lanes are sometimes known as High Occupancy Vehicle Lanes. To
travel on these lanes, you may need to have more than one person in the car, for example, or the
car may need to use environmentally-friendly fuel.
Unpaved roads
You can set the following actions to be taken for each type of road:

Ask - when the route is planned, you have to select how to handle these roads when they occur
on your route.
19


Always - the type of road is always avoided automatically.
Never - the type of road is never avoided automatically.
Advanced settings
Tap Advanced settings to adjust the following settings:
Advanced settings
Show lane guidance images
Adjust this setting to switch lane images on and off.
Advanced Lane Guidance helps you prepare for motorway exits and junctions by showing you which
lane you should be in.
Plan IQ Routes
Adjust this setting to switch IQ Routes on and off.
IQ Routes is used when you plan a route. Your route is calculated using information about the real
average speeds measured on roads, so your route may change depending on the time of day and day
of the week.
Note: IQ Routes information is not available for all regions. For more information on IQ Routes, go
to tomtom.com/iqroutes.
Auto hide route summary after 10 seconds
Switch this setting on to automatically close the Route Summary screen after 10 seconds.
Show location previews
Switch this setting on to show a preview of your destination location before going to the Route Summary screen.
About
Tap About for information about the application and map version as well as
details about licences, copyright, information sharing, and legal information.
About
Reset to defaults
Tap this button to reset TomTom Nav App to the default settings. You lose your settings and saved
locations.
20
Main menu
The Main menu
When you start TomTom Nav App without having earlier planned a route, the Main menu is shown.
To open the Main menu from the Driving View, tap the screen.
The following buttons are available in the Main menu:
Tap this button to start planning a route.
Drive to
Tap this button to change your route or clear your route.
Note: This button is active only if a route is planned.
Change route
Tap this button to browse the map in the same way as you might look at a
traditional paper map.
View map
Tap this button to plan a route in advance, selecting your starting point and
your destination.
Advanced
planning
Tap this button to go to Favourites where you can add to, edit and delete
your Favourites.
Manage favourites
Tap this button to change how TomTom Nav App behaves.
Settings
21
Drive to menu
When you tap Drive to in the Main menu, you can select your destination in the following ways:
Tap this button to plan a route to your Home location.
To set your Home location, tap Change home location in the Settings
menu.
Home
Tap this button to select a Favourite to drive to.
To add a favourite, tap Manage favourites in the Settings menu.
Favourite
Tap this button to enter an address or a postcode as your destination.
Address
Tap this button to select your destination from a list of places you have
recently used as destinations. These also include your Travel via stops.
Recent destination
Tap this button to navigate to a Point of Interest (POI).
Point of Interest
Tap this button to select a point on the map as your destination using the
Map Browser.
Point on map
Returning to the Driving View
To return to the Driving View at any time tap the return arrow in the top right corner of the screen:
To return to the previous screen tap the back arrow in the top left of the screen:
22
View map
Viewing a map
Tap View map in the Main menu to open the map. You can view the map in the same way that you
look at a traditional paper map.
You can move around the map by using your finger to drag the map across the screen.
You can zoom in and out using the zoom buttons on the left side of the map. You can also zoom in by
tapping the screen twice with one finger.
Tap Details to choose what to show on the map:




Names - shows street and other names.
Points of Interest (POIs) - shows points of interest.
Favourites - shows your Favourites.
Satellite images - shows a satellite image when zoomed out instead of a street map.
You can select or find a location on the map, then drive to that location.
Selecting items on the map
You can select a location on the map in the following ways:



Tap the map to place the cursor at the location you tap.
Tap a POI on the map.
Tap Find and search for a location on the map. Choose the location in the same way as you
choose a destination. This means you can select from all the same options that are offered when
you choose a destination, for example Address, Favourite, Landmark or Point of Interest, or
Point on map.
Details of a location are shown, along with an arrow.
Tap the location to open a menu with the following options:
23
Tap this button to plan a route from your current location to the cursor
position.
Drive there
Tap this button to travel via the cursor position on the route that is currently
planned. This option is only active if you have already planned a route.
Travel via...
Tap this button to add the cursor position as a Favourite. You can choose to
give the favourite a name or you can use the suggested name.
Add to favourites
Tap this button to search for POIs near the location.
Find POI nearby
Tap this button to move the map so that the cursor position is in the centre
of the screen. The map zooms in on the cursor position.
Centre on map
Shows the details of the location you selected. Tap More... to show more
information about the POI, to search for parking nearby or to add the
location to your favourites.
View location
details
24
Points of Interest (POIs)
About POIs
Points of Interest or POIs are useful places on the map.
Here are some examples:





Restaurants
Hotels
Museums
Parking garages
Petrol stations
There are several places where you can use POIs in TomTom Nav App:



Selecting a POI as your destination when planning a route.
Calling a POI from the map.
Selecting which POIs to show on the map.
Driving to a POI
You can select a POI as your destination or as a Travel via location in the following way:
1. Tap the screen to show the Main menu.
2. If you want to navigate to a POI, tap Drive to then tap Point of Interest.
3. If you have already planned a route and want to add a POI as a Travel via stop, tap Change route
on the Route Summary screen. Tap Travel via... then tap Point of Interest.
4. Narrow your choice of POIs by selecting the area where the POI is located.
The following options are available:
Tap this button to choose from a list of POIs near to your current
location.
POI near you
Tap this button to choose from a list of POIs near to your Home location.
POI near Home
Tap this button to find a POI in a particular town or city.
POI in city
25
The following options are available when a route is already planned:
Tap this button to find a POI along your planned route.
POI along route
Tap this button to find a POI near your planned destination.
POI near
destination
5. Select the category of POI.
Tap Search POI to search for a POI by name. All POIs in all categories are searched.
Tap the category of the POI, if it is shown.
Tap Other categories to choose from the complete list of categories. Select the category from the
list.
6. From the list of POIs shown, select the POI you want to navigate to.
The list below explains the distances listed next to each POI:

POI near you - Distance from your current location

POI in city - Distance from the city centre

POI near Home - Distance from your Home location

POI along route - Distance from your current location

POI near destination - Distance from your destination.
If you have planned a route, a symbol is also shown next to each POI:
POI is on your route
POI is close to your route
POI is fairly close to your route.
After you select a POI, detailed information such as the phone number and a short description is
shown. You can tap the phone number to phone the POI.
7. Tap Select to confirm you want to plan a route to this POI.
8. Tap Go!
TomTom Nav App starts to guide you to your destination using spoken instructions and on-screen
directions.
Finding a POI on the map
You can find a POI using the map then contact the POI or navigate to it.
26
1. Tap the screen to show the Main menu.
2. Tap View map.
Make sure Points of Interest are selected in the Details page. You can also select which POIs to
show on the map.
3. Find a POI on the map.
You can tap Find then Point of Interest to find POIs along your route or in a city, and zoom in
and move the map.
4. Select a POI symbol then tap the POI name panel to display the POI menu.
The following options are available:
Tap this button to plan a route from your current location to the cursor
position.
Drive there
Tap this button to travel via the cursor position on the route that is
currently planned. This option is only active if you have already planned
a route.
Travel via...
Tap this button to add the cursor position as a Favourite. You can
choose to give the favourite a name or you can use the suggested
name.
Add to favourites
Tap this button to search for POIs near the location.
Find POI nearby
Tap this button to move the map so that the cursor position is in the
centre of the screen. The map zooms in on the cursor position.
Centre on map
Shows the details of the location you selected. Tap More... to show
more information about the POI, to search for parking nearby or to add
the location to your favourites.
View location
details
Showing POIs on the map
POIs can be shown in the Driving View and on the map.
To show POIs in the Driving View, do the following:
1. Tap Settings in the Main menu.
2. Tap Driving view.
3. Tap Show point of interest.
To show POIs on the map, do the following:
1. Tap View map in the Main menu.
2. Tap the Details button.
27
3. Tap Points of Interest (POIs) to show POIs on the map.
Selecting which POIs to show on the map
You can select the categories of POIs that are shown, for example, petrol stations, restaurants and
hotels.
To change the POI categories shown in the Driving View, do the following:
1.
2.
3.
4.
5.
6.
7.
Tap Settings in the Main menu.
Tap Driving view.
Tap Show point of interest.
Select which POIs you want to be shown on the map
Tap Next.
Select if you want to show POIs on 2D and 3D views.
Tap Done.
To change the POI categories that are shown on the map, do the following:
1.
2.
3.
4.
5.
6.
Tap View map in the Main menu.
Tap the Details button.
Tap Points of Interest (POIs) to show POIs on the map.
Tap Choose POIs.
Select which POIs you want to be shown on the map.
Tap Done two times to return to the map.
28
Favourites
About Favourites
Favourites provide an easy way to select a location without the need to enter the address. They do not
need to be favourite places, they can simply be seen as a collection of useful addresses.
Creating a Favourite
You can create a Favourite from one of the following locations in TomTom Nav App:


Using the Manage favourites button in the Main menu to open the Manage Favourites screen.
From a location selected on the map.
To create a Favourite using the Manage Favourites screen, do the following:
1. Tap the Add button.
The Add as Favourite menu appears showing the buttons listed below. Use a button to find a
Favourite.
2. Give your Favourite a name that is easy to remember.
TomTom Nav App will always suggest a name. If you want to enter your own name, delete the
suggested name and enter a new one. You can always change the name later.
3. Tap Next to save the Favourite.
Tap this button to add your Home location as a Favourite.
To set your Home location, tap Change home location in the Settings
menu.
Home
Tap this button to enter an address as a Favourite. To use a postcode,
tap the Postcode button at the top of the screen to display the Postcode screen.
Address
Tap this button to show a list of your recent destinations. These also
include your Travel via stops. Tap a recent destination to add it as a
Favourite.
Recent destination
29
Tap this button to use a Point of Interest (POI) as a Favourite.
Point of Interest
Tap this button to use your current location as a Favourite.
My current location
Tap this button to select a point on the map as a Favourite.
Point on map
Using a Favourite
You can use a Favourite as a way of navigating to a place without having to enter the address. To
navigate to a Favourite, do the following:
1.
2.
3.
4.
Tap the screen to show the Main menu.
Tap Drive to.
Tap Favourite.
Select a Favourite from the list.
TomTom Nav App calculates the route for you.
5. Tap Select.
6. Tap Go!
TomTom Nav App starts to guide you to your destination using spoken instructions and on-screen
directions.
Changing the name of a Favourite
To change the name of a Favourite, do the following:
1.
2.
3.
4.
Tap the screen to show the Main menu.
Tap Settings.
Tap Manage favourites.
Tap the Favourite you want to rename.
The information screen opens.
5. Tap Rename, then enter the new name for the Favourite.
6. Tap Next.
The Favourite is renamed.
Deleting a Favourite
Delete a Favourite as follows:
30
1.
2.
3.
4.
Tap the screen to show the Main menu.
Tap Settings.
Tap Manage favourites.
Tap the Favourite you want to delete.
The information screen opens.
5. Tap the Delete button. Tap Yes to confirm you want to delete it.
31
Addendum
Important Safety Notices and Warnings
Global Positioning System
The Global Positioning System (GPS) is a satellite-based system that provides location and timing
information around the globe. GPS is operated and controlled under the sole responsibility of the
Government of the United States of America which is responsible for its availability and accuracy. Any
changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of
this navigation system. TomTom does not accept any liability for the availability and accuracy of GPS.
Use with care
Use of TomTom navigation while driving still means that you need to drive with due care and attention.
This document
Great care was taken in preparing this document. Constant product development may mean that some
information is not entirely up to date. The information in this document is subject to change without
notice.
TomTom shall not be liable for technical or editorial errors or omissions contained herein, nor for
incidental or consequential damages resulting from the performance or use of this document. This
document contains information protected by copyright. No part of this document may be photocopied
or reproduced in any form without prior written consent from TomTom N.V.
32
Copyright notices
© 2013 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of
TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for limited warranty and end
user licence agreements applying to this product.
© 2013 TomTom. All rights reserved. This material is proprietary and the subject of copyright protection and/or database rights protection and/or other intellectual property rights owned by TomTom or its
suppliers. The use of this material is subject to the terms of a licence agreement. Any unauthorised
copying or disclosure of this material will lead to criminal and civil liabilities.
Ordnance Survey © Crown Copyright Licence number 100026920.
Data Source © 2013 TomTom
All rights reserved.
Some images are taken from NASA’s Earth Observatory.
The purpose of NASA's Earth Observatory is to provide a freely-accessible publication on the Internet
where the public can obtain new satellite imagery and scientific information about our home planet.
The focus is on Earth’s climate and environmental change: earthobservatory.nasa.gov
The software included in this product contains copyrighted software that is licensed under the GPL. A
copy of that licence can be viewed in the Licence section. You can obtain the complete corresponding
source code from us for a period of three years after our last shipment of this product. For more
information, visit tomtom.com/gpl or contact your local TomTom customer support team via
tomtom.com/support. Upon request, we will send you a CD with the corresponding source code.
Linotype, Frutiger and Univers are trademarks of Linotype GmbH registered in the U.S. Patent and
Trademark Office and may be registered in certain other jurisdictions.
MHei is a trademark of The Monotype Corporation and may be registered in certain jurisdictions.
33
Download PDF

advertising