SoundBot SB235
USER MANUAL
Dual-mode Stereo Bluetooth
Headphone with NFC Pairing
Table of contents
SB235 USER MANUAL
SB235 USER MANUAL
SB235 USER MANUAL
SB235 USER MANUAL
SB235 USER MANUAL
SB235 USER MANUAL
1 Introduction coer eee 1
2 Kit Contents -............_eeesesaesmeneorereermenee, 1
3 Connection Diagram -............we..reeeereeeos 2
4 How to USe -........eweeeeeernrmeecrereeooreeacareezA 2
4.1 General function -..............—-—.—.—.—.......... 2
4.2 Pairing to mobile phone -------..--=......- 3
4.3 Charging your device ---------===m===e..... 5
5 Technical specification RAS 5
6 Service and Support .........еееекеееенннннооооо 6
7 FAQ ..…............uccrccrrranee mar nana nan nana nana nn nne 6
1. Introduction
Congratulations, and thank you for choosing the Bluetooth
Stereo Headphone. This manual will help you operate the
Bluetooth Stereo Headphone, but you should first
familiarize yourself with the Bluetooth functionality of your
mobile phone or other devices before using the Bluetooth
Stereo Headphone
Safety Rules
1\ Please follow the rules depicted in this manual closely
to ensure your safety. Before using this Bluetooth
Stereo Headphone, we would strongly encourage you
to read
through this user manual.
2\ Be more wary of any edges, uneven surfaces, metal
parts, accessories and its packaging so as to prevent
any possible injury or damage.
Do not modify, repair or dismantle this Bluetooth
Stereo Headphone. Doing so may result in fires, electric
shocks, complete breakdown of this Bluetooth Stereo
Headphone, etc. All of which, are not covered under
warranty.
Do not use any diluents or volatile liquid to clean the
Bluetooth Stereo Headphone.
Do not use the Bluetooth Stereo Headphone in a
hazardous location.
3
pr
4
5
—
2.Kit Contents
1X Bluetooth Headphone SB230
1X USB Charger Cable
1X Audio cable
1X User Manual
3.Connection Diagram
3.5MM audio jack
Turn on/Turn off /
Enter the pairing mode/
Answer call/
Reject call/
nd ca
| ast number redial
Play / pause/
Charging
4 How to use
Volume up/Previous
Volume down/Next
4.1.General Functions
Desired Result
Required Action
Turn on
Press the "MFB” button for 2 seconds when
the device is off. (Red LED light and a tone
voice beep)
Enter the pairing
mode
In power off mode, Press the "MFB" button
and hold on for 5 seconds. (Blue LED and
Red LED quickly flash alternately with two
beep tone voice).
In pairing Mode use a mobile phone with
Bluetooth function or other Bluetooth
Pairing Master Device and to perform pairing action
(detail refer to the chapter about pairing).
_, In pairing mode, use a phone with NFC fun-
NFC Pairing ction to contact the Headphone " " logo to
perform the fast connection
Volume up Press the "+" and hold is for volume up
Volume down
Press the "-" and hold is for volume down
1
Desired Result Required Action
Previous Short click "+"button for Previous music.
Next Short click "-"button for next music.
Turn off Press the button"MFB"for 3 seconds when
the device is on.(a tone voice beep and all
LED is off)
Play / pause click"MFB" button to play music when the device
is connected or pausing and click"MFB"button to
pause when the device is playing music.
Low battery warning | (The LED flash)
Plug the charger to port of the device.
Charging (Red LED is on)
Short click the "MFB" button while the
Answer call incoming call.
End call Short click the "MFB"button while ongoing
Double click the"MFB"button to transfer
the call voice between the mobile phone
and device while ongoing call.
Transfer call
voice
last number redial | Double click the"MFB"button In the connected
state or there is music
Reject call Press the"MFB"button for 1-2 seconds to
reject call when the call is ringing
Multi-point In pairing mode, short single the"MFB" to
connection enable the multipoint and double press the
"MFB" to disable the Multipoint.
Long press "MFB"and"-"button for 5 second
at pairing mode to clear the paired device list
Factory reset
4.2. Pairing to Mobile phone or other device
To use your Bluetooth Headphone, you must first pair your Headph-
one with a phone or a computer. Once your Bluetooth Headphone is
paired to a specific mobile phone; they willremain paired and autom-
atically recognize each otherwhenever they are within range.
Pairing to a phone and Entertainment:
© Turn on your phone and ensure its Bluetooth function
is activated
.
Turn on the Bluetooth Stereo Headphone go to the paring
* mode.
Search your Bluetooth devices on your phone b
following the phone's instructions. Refer to your phone's
e User manual for more information.
After a few second the phone will list the SB230 as a
discover device. Select it and follow your phone
instruction to select this pairing.
* Then your phone will request a passkey or PIN, enter
0000 as your PIN or passkey.
® Your phone will confirm the pairing, and then press Yes/Ok.
e Finally, select to connect with device from your phone.
You can play music; watch TV/movie and play game with
your phone, then your can hear all the sound or music
form the device. Also you can control the player by
operating the device. Example, volume up and next music.
Pairing to a computer and Entertainment:
* |f there is no Bluetooth function supported by your
computer, a Bluetooth adapter is necessary. Fix the
adapter with your computer and ensure its Bluetooth
function is activated.
* Turn on the device go to the paring mode.
Open the Bluetooth software (such as SoundBot)
installed on your computer, and selects “Search your
Bluetooth devices” function. Refer to user manual of the
Bluetooth software for more information.
© After a few second the “ SB230” will be listed in Bluetooth
software of your computer as a disc device device.
Select this icon and click right button of mouse to select
“pairing” item,then select “connect with audio device”
with same operation.
* Open your media player soft to play music, watch TV/move
and play game, then all the sound will be playback on your
device.
4.3. Charging your device
The device is convenient to connect to AC charger or a USB
charger with Micro USB port marked with.Make sure that
your device is full charged for at least 6 hours before initial
use. Insert one terminal of your charger to AC main or USB
port of PC and other terminal to Micro USB. While charging,
he red LED light constantly. When charging is completed,
the blue LED turns on.
Warning:
* You must select a qualified charger from a regular
manufacturer.
e You must charge the Bluetooth Headset if it has been
not used for more than 12 months.
5.Technical specification
Parameter Value
Bluetooth
Specification
Bluetooth Profile
Bluetooth V4.0
A2DP1.2 AVRCP1.4 HSP1.2 HFP1.6
DSP CVC6.0 Noise and Echo reduction
RF Range 10m
Frequency
Response 60Hz-20KHz
Loudspeaker
Output 20mW
Signal-To-Noise
Parameter Value
Distortion <1.0%
Playback Time about 10 hours
Charging Time about 2.5 hours
WE) 179x 190x 69mm
Weight 165g
6.Service and Support
If your device is not performing as it should,please take it to
your local service providers or dealer for service.
7.FAQ
1\ Why is there no power even when the Stereo Headphone
is power on?
Ans: Ensure the battery is being charged up to 6 hours for
first time using. The LED is lighted when it starts
charging.
2\There is no sound when playback.
Ans: Check the connection between your device with phone
or computer, if the connection is not established, please
reconnect again. Make sure the Stereo Headphone
device is paired and connected target phone or other
master device.
3\How can | know the Bluetooth Stereo Headphone has
been fully charged?
Ans: When the indicator LED turns red to blue when it is
charging, it has been fully charged.
4\Why the Headphone cannot connect to second phone
Ans: Please set the Headphone to pairing mode and short
press the"MFB"to enable multipoint mode Connect the
Headphone to phone A,Restart the Headphone to pair-
ing mode and connect the Headphone to phone B, and
then use phone A paired device list to reconnect to the
Headphone
2
3
7 909B
6
">
