SRS Labs HANNSPREE LT0G-15A1 User manual

SRS Labs HANNSPREE LT0G-15A1 User manual
15" Liquid Crystal Display
Television
2F, No.362, Ruei-Guang Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C.
TEL: 886-2-87520000
LT0G-15A1
FAX: 886-2-87527092
www.hannspree.com
NTSCTVTWEN1203
MAC-001149
Table of Contents
1.
2.
3.
4.
5.
6.
Warranty and Service .................................................... 3
Preface ......................................................................... 4
Description of Warning Symbols ..................................... 5
Safety Notices ............................................................... 6
Regulatory Information ................................................ 14
Introducing the TV ....................................................... 16
Features .................................................................. 16
7. Checking Package Contents ........................................ 17
8. Getting to Know Your TV ............................................. 18
Front View ............................................................... 18
Input and Output Ports ............................................. 19
9. Getting Started ............................................................ 21
Connecting to an Antenna or Cable TV ..................... 21
Connecting to AV Devices ........................................ 22
Connecting to a VCR/VCD/DVD Player ................ 22
Connecting to a Video Camera ............................ 23
Connecting to a Game Device ............................. 24
Connecting External Speakers or Headphones .......... 25
Connecting to a PC .................................................. 26
Connecting the Power Adapter ................................. 27
10. Using the TV .............................................................. 28
Using the Remote Control ........................................ 28
Turning the TV On and Off ....................................... 29
Selecting Channels .................................................. 29
Switching Source Signals ......................................... 30
Adjusting the Volume ............................................... 30
11. Adjusting On-Screen Display (OSD) Settings ............... 31
Brightness ............................................................... 32
Contrast .................................................................. 33
Audio Setting ........................................................... 34
Treble ................................................................. 35
Bass ................................................................... 36
Balance .............................................................. 37
SRS ................................................................... 38
1
Table of Contents
12.
13.
14.
15.
2
Mute ...................................................................
Video Setting ...........................................................
Hue ....................................................................
Saturation ...........................................................
Sharpness ..........................................................
Color Temperature ..............................................
TV Setting ...............................................................
TV/CATV ............................................................
MTS ...................................................................
Auto Program ......................................................
Manual Program ..................................................
Channel Add/Erase .............................................
PC Setting ...............................................................
Horizontal Position ..............................................
Vertical Position ..................................................
Phase .................................................................
Clock ..................................................................
Color Temperature ..............................................
Miscellaneous Setting ..............................................
Language ...........................................................
Sleeper ...............................................................
OSD Display .......................................................
Time Setting .......................................................
OSD Background ................................................
Reset .................................................................
Taking Care of Your TV ..............................................
Troubleshooting ..........................................................
Specifications .............................................................
Glossary ....................................................................
39
40
41
42
43
44
45
46
47
49
50
51
52
53
54
55
56
57
59
60
61
62
63
64
65
67
68
70
71
1
Warranty and Service
The instructions on this manual are for the model(s) listed on the front
cover. Before you start reading, check your product number by looking
at the rear of your TV.
Thank you for purchasing our Liquid Crystal Display Television (LCD
TV). With this product, you will be able to enjoy superior audio and
video while enriching your lifestyle with advanced technology.
The Hannspree TV is warranted for one year limited service from the
date the product is received (as shown on the Warranty and Service
Manual); please refer to the “Warranty and Service Manual” for the
detailed warranty information.
Hannspree provides complete service information in the included “Warranty and Service Manual”, or directly from Hannspree global customer
service center. Our service representatives will be very happy to serve
you to your satisfaction.
Hannspree global customer service center telephone number:
From Taiwan please call 0800-008-800
Hannspree e-mail address:
[email protected]
3
2
Preface
This manual is designed to assist users in setting up and using the
LCD TV. Information in this document has been carefully checked
for accuracy; however, no guarantee is given to the correctness of
the contents. The information in this document is subject to change
without notice.
Copyright
© Copyright 2003 Hannspree, Inc.
All rights reserved. This product and related documentation are protected by copyright and are distributed under licenses restricting their
use, copying, and distribution. No part of this documentation may be
reproduced in any form by any means without prior written authorization
of Hannspree, Inc., and its licensors, if any.
4
3
Description of Warning Symbols
Warning
Caution
This symbol is used to remind
users to pay attention to
important descriptions regarding usage and maintenance
(repair) or additional important information related to this
product.
This symbol is used to remind
users to pay attention to the
danger of electric shocks due
to dangerous internal noninsulated components.
Electric Power Notice
Electric power may cause personal injury and mechanical damage if it is
misused. Although safety has been taken into consideration during the
design and production of this product, electric shock or fire can result
when the product is misused. To prevent potential danger, follow the
instructions below when installing, operating and cleaning the product.
In addition, read the following “Safety Notices” carefully before using the
product to ensure that your TV is safe and long-lasting.
5
4
Safety Notices
Power Supply Safety Notes
1. To avoid electric shocks, do not use an extended power cord or
an outlet that does not match this product's plug or leaves the
plug exposed.
2. This product has a 3-pin grounded plug. The third pin connects
to ground; do not remove it.
3. If the power cord or plug is damaged or worn, unplug it immediately and contact a qualified service technician for maintenance.
4. To avoid fire or electric shocks, do not overload electric power
outlets.
Installation Safety Notes
Antenna
We suggest that you use an outdoor antenna to get the best signal
possible unless you have cable TV or a centralized indoor antenna
system. You may, however, use an antenna indoors if it is placed in
a location free from interference.
Location
Avoid allowing the TV to get prolonged exposure to sunlight or
other strong sources of heat. Leave sufficient distance between the
TV and the wall to provide enough space for the emission of heat.
6
Before You Proceed
1. Read the Safety Notices and the User’s Manual carefully
before turning the product on.
2. Keep your User’s Manual in a safe place for future reference.
Keep the box and packaging in case the product needs to be
shipped in the future.
3. Follow the product and warning label instructions.
4. Any changes or modifications that do not follow the instructions
in this manual will void this product's warranty.
Warning
To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
Power
To avoid danger of fires or electric shock, make sure that you use a
proper adapter. The TV is compatible with the following adapters:
• EDAC POWER ELECTRONICS CO., LTD.: EA 1050A-120
• LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0218B1260
7
Optimal Viewing Distance
8
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug: A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
9
10. Protect the power cord from being walked on
or pinched particularly at the plug, convenience receptacles, and the point where they
exit from the apparatus.
11. Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
12. Only use attachments/accessories specified
by the manufacturer.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
10
Personal Safety
To avoid overloading the power supply, do not
plug too many electrical devices into an outlet or
extension cable.
Dangerous high-voltage electric power components are located inside the TV. To avoid electric
shock, do not disassemble the casing.
Do not place or drop metals, small objects, or
flammable materials in the vent to avoid an electric shock or a fire.
If the TV is dropped, falls down, or is otherwise
damaged, unplug the power cord immediately
and notify a qualified service technician.
If any fluid is sprayed or dropped into the TV,
remove the power plug immediately and notify a
qualified service technician.
The screen of the TV is made of glass, be careful to avoid hitting or scraping it. If the screen is
broken, avoid cutting yourself on the broken
glass.
Do not allow children to use the TV unattended
to avoid accidents caused by improper operation.
11
Installation
To avoid damage to power circuits, do not place
the TV in locations where there is excessive
steam or dust.
Do not place the TV on a bed, sofa, carpet, or in
a sealed cabinet to avoid blocking the product's
vents.
Install the outdoor antenna far from power transmission lines to avoid possible danger.
Remove the power cord and antenna connector
when there is a storm or when the TV is not in
use for a long period to avoid electric shock from
lightning.
12
Operation
V
This product is designed for power sources as
labeled on the casing. Avoid using any other
power accessories to avoid electric shock or
other damage.
The plug can be inserted into an outlet in only
one direction. Notify a qualified service technician if you cannot plug it in correctly.
If there is any problem that cannot be resolved
according to the instructions given in this manual, notify a qualified service technician immediately. Do not attempt any methods not covered in
this manual.
Maintenance
Do not attempt to repair the TV by yourself.
Notify a qualified service technician. Ask the service technician to complete a safety inspection
before switching the power on after completing
any maintenance.
13
5
Regulatory Information
FCC Compliance Statement1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
•
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to nearby radio and television reception. It is essential that only the supplied power cord be
used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void your
authority to operate the equipment.
1. applies only to products purchased in the United States of America
14
DOC Compliance Notice1
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.This
device complies with Canada ICES-003 Class B.
CE Conformity Statement2
This device complies with the requirements set out in the Council Directive on the approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (89/336/EEC) and the Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC).
1. applies only to products purchased in Canada
2. applies only to products purchased in the European Union
15
6
Introducing the TV
Thank you for purchasing this 15-inch
Liquid Crystal Display TV. Your LCD TV
is designed to be safe, versatile, and
easy to use. The sturdy design makes it
a fun addition to any room.
You can watch broadcast or cable television channels, and easily connect a
VCR, VCD or DVD player or a game
device to the standard RCA and S-Video
input ports that are included in the 4-IN1 cable. You can also connect your TV to a PC and use the TV as an
external monitor.
Convenient control buttons located on the front panel and a handy
remote control let you change channels, adjust the volume, and
change display settings through an easy-to-use on-screen menu system. The built-in stereo speakers provide full rich sound and a convenient audio output port lets you connect to an external audio system
or headphones.
Features
•
•
•
•
•
•
15-inch color TFT LCD TV
Safe and sturdy construction
Built-in TV tuner
4-IN-1 cable
On-Screen Display (OSD) menu system
Built-in 3W+3W speakers
16
7
Checking Package Contents
Make sure the following components are included in the box. Contact
your vendor immediately if anything is missing or damaged.
TV
User’s Manual
Quick Start Guide
User's Man
ual
Warranty and
Service Manual
Quick Sta
Guide rt
Warranty
and
manual service
Wire Material Package
4-IN-1
Cable
RCA
Jack x 3
874
Power
Adapter
E77
Power Cord
W
-1
VGA Cable
0V
G W A 1 8 30
80 C
V
17
8
Getting to Know Your TV
Front View
9
9
Signal
sensor
8
ON/OFF
1
Description
1
2
Power
Power LED
3
Mute
4
Source
5
Menu
6
Select channel
7
Adjust volume
8
9
Headphone
Stereo speakers
18
MUTE
2
3 4
SOURCE
5
MENU
< CH >
< VOL >
6
7
Function
Turns the TV on and off.
Green LED indicates power on.
In TV/AV mode, press this button to mute the
audio.
Selects the input source to be displayed
(TV/CATV, AV1,AV2 or PC).
Turns the On-Screen Display (OSD) menu on
and off.
Changes channels. Press CH> to increase
the channel number. Press CH < to decrease
the channel number. In PC or AV mode,
press either button to return to TV mode.
Press VOL > to increase the audio volume.
Press VOL < to decrease the audio volume.
Connects to headphones or external speakers
Play audio content.
Input and Output Ports
R-AUDIO-L
1
2
VIDEO
AV2
ANT
3
4
5
Description
DC-IN
6
VGA
LINE
IN
LINE
OUT
7
8
9
Function
1
R-AUDIO
Connects to a right audio (red)
cable
2
L-AUDIO
Connects to a left audio (white)
cable
3
VIDEO
Connects to a video (yellow) cable
19
4
AV2
Use the included 4-IN-1
Audio/Video cable to connect external devices, such as a VCR, VCD,
or DVD player, CVBS RCA cables
or a game device.
Audio Input: AV connectors white
and red audio cables.
Video Input: AV connector video
(yellow) or S-Video cables.
5
ANT
Connects to an antenna or CATV
cable television line.
6
DC 12V
Connects to the included power
adapter.
7
VGA
Connects to a PC.
8
LINE IN
Connects to a PC's DVI port.
9
LINE OUT
Connects to headphones or external stereo speakers.
20
9
Getting Started
Connecting to an Antenna or Cable TV
1 Connect one end of the UHF or CATV cable to ANT Jack (VHF/UHF
IN Jack) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket or CATV cable.
Antenna
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA
LINE
IN
ANT jack
(VHF/UHF IN jack)
LINE
OUT
Antenna/CATV
socket
Antenna/CATV
coaxial cable
Note
If you cannot receive channels after connecting to an antenna or cable TV
line, try scanning for channels. See “Auto Program” on page 49.
21
Connecting to AV Devices
Connect external devices such as a VCR, VCD or DVD player, or
video game to the TV using the 4-IN-1 cable.
Connecting to a VCR/VCD/DVD Player
The illustration presented here shows how to connect the TV to a
VCR, VCD or DVD player. Actual connections may vary according to
the make and model of the device. Refer to the user’s manual
included with the device for more detailed instructions.
VCR
DVD
VCD
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA
LINE
IN
LINE
OUT
B
4-IN-1 jack
R
W Y
S-Video
connector
AV
connectors
4-IN-1 cable
Note
The cables are color-coded (black, red, white, yellow). Connect each colorcoded cable to the appropriate connector on your device.
22
Connecting to a Video Camera
The instructions presented here are a general guide to connecting
the TV to a camcorder or other type of digital camera. Actual connections may vary according to the make and model of the device. Refer
to the user’s manual included with the camcorder or camera for more
detailed instructions.
WB
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA
4-IN-1 jack
LINE
IN
S
LINE
OUT
S-Video
connector
B
R
W
4-IN-1 cable
Y
AV connectors
Note
The cables are color-coded (black, red, white, yellow). Connect each colorcoded cable to the appropriate connector on your device.
23
Connecting to a Game Device
The instructions presented here are a general guide to connecting
the TV to a game device using the RCA Jacks provided (some game
devices may require a unique adapter that is not provided). Actual
connections may vary according to the make and model of the game
device. Refer to the user’s manual included with the game device for
more detailed instructions.
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA
LINE
IN
LINE
OUT
B
R
W Y
4-IN-1 jack
S-Video
connector
AV
connectors
4-IN-1 cable
Notes
• Connect the 4-IN-1 cable connectors to the corresponding connectors on
your game device adapter.
• If the 4-in-1 cable does not fit the game device, then insert the included
RCA jack between the 4-in-1 cable and game device.
24
Connecting External Speakers or Headphones
External speakers or headphones may be used to listen to the TV
rather than using the built-in speakers. Connect external speakers or
headphones to the speaker line out port as illustrated.
Headphones
Speaker/Headphone
line out port
Speakers
Notes
• External speakers or headphones are not included with the product.
• The internal TV speakers will not output sound when headphones are
plugged in.
• Use external speakers with amplifiers only.
25
Connecting to a PC
You can connect the TV to a PC and use it as an external monitor.
Connect the TV’s VGA port to the PC’s VGA port. Connect the TV’s
line in port to the PC’s line out port to listen to the PC’s audio output
on the TV’s speakers. Refer to the following illustration.
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA port
VGA
LINE
IN
LINE
OUT
Line in
Line
out
VGA port
Note
You can connect the line out port of a CD-ROM player, stereo, or other
device to the TV’s line in port to listen to the devices audio output.
26
Connecting the Power Adapter
1 Connect the power cord to the power adapter as illustrated.
2 Plug the power adapter connector into the DC-IN input jack on the
rear panel of the TV.
3 Insert the three-pronged plug at the other end of the power cord into
a power outlet.
Power outlet
Three-pronged
plug
R-AUDIO-L
VIDEO
AV2
ANT
DC-IN
VGA
LINE
IN
LINE
OUT
Power cord
DC-IN
DC-IN input jack
Power adapter
27
10
Using the TV
Using the Remote Control
For best results, use the remote control within a distance of 5 meters
from the front of the TV’s signal sensor. Do not exceed an angle of 30
degrees when pointing at the signal sensor. Refer to the following
illustration.
28
Turning the TV On and Off
1 Press the POWER button on
Power button
the remote control (or control
panel). The power LED on the
front of the TV changes from
red to green, indicating that
the power has been turned
on.
2 Press the POWER button
again; in AV mode, the power
Power LED
LED changes from green to
red, indicating that the TV is in (off) mode. When signal is not
detected in PC mode, the power LED turns amber, indicating that the
PC is in standby mode.
Selecting Channels
Press the CH UP button or CH
DOWN button on the control
panel to select the channel or
enter the specific channel number by pressing the number buttons on the remote control.
ON/OFF
MUTE
SOURCE
MENU
< CH >
< VOL >
Channel down
Channel up
29
Switching Source Signals
Press SOURCE to select the
incoming source signal.
The current source setting
(TV/CATV, AV1,AV2 or PC )
appears on the upper left corner
of the screen.
Note
The TV supports S-Video input in
addition to normal video and
audio signals. The TV detects the
signal type automatically and
gives priority to S-Video when two
signals are detected at the same time.
ON/OFF
MUTE
SOURCE
MENU
< CH >
< VOL >
< CH >
< VOL >
Source
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press
VOL DOWN button to
decrease the volume. The
volume level is displayed on
the TV.
48
ON/OFF
Volume
level
30
MUTE
SOURCE
Volume down
Volume up
MENU
11
Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple
method to adjust your TV’s settings. This chapter describes how to change
each of the available settings.
The OSD can be used with either the remote control or the control panel.
Button Descriptions
Control Panel
MENU
MENU
CH UP
CH >
CH DOWN
CH <
ENTER
MENU
Note:
The following sections explain how to adjust settings in the OSD menus using
the control panel.
OSD Setting Menu
PC
Brightness&Contrast
30
30
Brightness
Contrast
MENU
< CH >
Return
Select
Press the MENU button to enter
the OSD menus.
Menu
OK
The Main Menu appears.
Note
To exit the OSD menus, press the CH UP button or the CH DOWN button to
select Exit
. Then press MENU to exit the OSD menus. Also, after you
finish setting OSD parameters, follow these instructions to exit the OSD
menus.
31
Brightness
1 Press MENU to enter the OSD
PC
menus.
Brightness&Contrast
2
5
Brightness
Contrast
2 Press the CH UP button or CH
DOWN button to select Brightness &
Contrast.
Return
Adjust
Menu
Next
3 Press MENU to enter the Brightness & Contrast menu.
4 Press the CH UP button to increase
the brightness. Press the CH DOWN
button to decrease the brightness.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the Brightness & Contrast menu.
Note
The new setting is confirmed automatically
when the OSD times out.
32
Contrast
1 Press MENU to enter the OSD
PC
menus.
Brightness&Contrast
2
5
Brightness
Contrast
2 Press the CH UP button or CH
DOWN button to select Brightness &
Contrast.
Return
Adjust
Menu
Next
3 Press MENU to enter the Brightness & Contrast menu.
4 Press MENU to select Contrast.
5 Press the CH UP button to increase
the contrast. Press the CH DOWN
button to decrease the contrast.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Brightness & Contrast menu.
Note
The new setting is confirmed automatically
when the OSD times out.
33
Audio Setting
PC
Audio Setting
MENU
< CH >
Treble
Bass
Balance
SRS
Mute
L
R
ON
ON
OFF
OFF
Return
Select
Press the MENU button to enter
the OSD menus.
Menu
OK
1 Press the CH UP button or CH
DOWN button to select Audio
Setting.
2 Press MENU to enter the
Audio Setting menu.
34
Treble
1 Press MENU to enter the OSD
PC
menus.
Audio Setting
Treble
Bass
Balance
SRS
Mute
L
R
ON
ON
OFF
OFF
Return
Adjust
Menu
2 Press the CH UP button or CH
DOWN button to select Audio
Setting.
Next
3 Press MENU to enter the Audio
Setting menu.
4 Press the CH UP button to increase
the treble. Press the CH DOWN button to decrease the treble.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
35
Bass
1 Press MENU to enter the OSD
PC
menus.
Audio Setting
Treble
Bass
Balance
SRS
Mute
2 Press the CH UP button or CH
L
R
ON
ON
OFF
OFF
Return
Adjust
Menu
Next
DOWN button to select Audio
Setting.
3 Press MENU to enter the Audio
Setting menu.
4 Press MENU to select Bass.
5 Press the CH UP button to increase
the bass. Press the CH DOWN button to decrease the bass.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
36
Balance
1 Press MENU to enter the OSD
PC
menus.
Audio Setting
Treble
Bass
Balance
SRS
Mute
2 Press the CH UP button or CH
L
R
ON
ON
OFF
OFF
Return
Adjust
Menu
Next
DOWN button to select Audio
Setting.
3 Press MENU to enter the Audio
Setting menu.
4 Press MENU to select Balance.
5 Press the CH UP button to change
the balance to the right speaker.
Press the CH DOWN button to
change the balance to the left
speaker.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
37
SRS
This option enables the 3D Surround Sound feature.
1 Press MENU to enter the OSD
PC
menus.
Audio Setting
Treble
Bass
Balance
SRS
Mute
L
R
ON
ON
OFF
OFF
Return
Adjust
Menu
2 Press the CH UP button or CH
DOWN button to select Audio
Setting.
Next
3 Press MENU to enter the Audio
Setting menu.
4 Press MENU to select SRS.
5 Press the CH DOWN button to turn
the SRS on. Press the CH UP button
to turn the SRS off.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
38
Mute
1 Press MENU to enter the OSD
PC
menus.
Audio Setting
Treble
Bass
Balance
SRS
Mute
L
R
ON
ON
OFF
OFF
Return
Adjust
Menu
2 Press the CH UP button or CH
DOWN button to select Audio
Setting.
Next
3 Press MENU to enter the Audio
Setting menu.
4 Press MENU to select Mute.
5 Press the CH DOWN button to turn
the mute on. Press the CH UP button to turn the mute off.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Audio Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
39
Video Setting
PC
Video Setting
MENU
< CH >
Hue
Saturation
Sharpness
Color Temp
G
R
Standard
Return
Select
Press the MENU button to enter
the OSD menus.
Menu
OK
1 Press the CH UP button or CH
DOWN button to select Video
Setting.
2 Press MENU to enter the
Video Setting menu.
40
Hue
1 Press MENU to enter the OSD
PC
Video Setting
Hue
Saturation
Sharpness
Color Temp
G
R
2 Press the CH UP button or CH
DOWN button to select Video
Standard
Setting.
Return
Adjust
menus.
Menu
OK
3 Press MENU to enter the Video
Setting menu.
4 Press the CH DOWN button to
increase the red hue. The image
becomes more red. Press the CH
UP button to increase the green
hue. The image becomes more
green.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
41
Saturation
1 Press MENU to enter the OSD
PC
Video Setting
Hue
Saturation
Sharpness
Color Temp
G
R
Standard
2 Press the CH UP button or CH
DOWN button to select Video
Setting.
Return
Adjust
menus.
Menu
Next
3 Press MENU to enter the Video
Setting menu.
4 Press MENU to select Saturation.
5 Press the CH UP button to increase
the saturation. The screen image
becomes more vibrant. Press the
CH DOWN button to decrease the
saturation. The screen image
becomes less vibrant.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
42
Sharpness
1 Press MENU to enter the OSD
PC
menus.
Video Setting
Hue
Saturation
Sharpness
Color Temp
G
R
DOWN button to select Video
Cold
Setting.
Return
Adjust
2 Press the CH UP button or CH
Menu
Next
3 Press MENU to enter the Video
Setting menu.
4 Press MENU to select Sharpness.
5 Press the CH UP button to increase
the sharpness. Press the CH DOWN
button to decrease the sharpness.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Video Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
43
Color Temperature
1 Press MENU to enter the OSD
PC
menus.
Video Setting
Hue
Saturation
Sharpness
Color Temp
G
R
DOWN button to select Video
Cold
Setting.
Return
Adjust
2 Press the CH UP button or CH
Menu
Next
3 Press MENU to enter the Video
Setting menu.
4 Press MENU to select Color Temp.
The following choices are available.
Warm
Press the CH UP button or CH
DOWN button to select Warm.
Standard
Press the CH UP button or CH
DOWN button to select Standard.
Cold
Press the CH UP button or CH
DOWN button to select Cold.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the Video Setting menu.
Note
The default color temperature is Standard.
44
TV Setting
PC
TV Setting
MENU
< CH >
CATV STD
TV/CATV
MTS
DUAL
YES
NO
Auto Program
Manual Program
Return
Select
Press the MENU button to enter
OSD menus.
Menu
OK
1 Press the CH UP button or CH
DOWN button to select TV
Setting.
2 Press MENU to enter the TV
Setting menu.
45
TV/CATV
1 Press MENU to enter the OSD
PC
TV Setting
CATV STD
TV/CATV
MTS
DUAL
YES
NO
Auto Scan
Manual Program
Return
Select menu
Menu
menus.
2 Press the CH UP button or CH
DOWN button to select TV Setting.
3 Press MENU to enter the TV Setting menu.
OK
4 Select one of the following choices.
PC
Receiving Air TV
TV Setting
AIR TV
TV/CATV
MTS
DUAL
YES
Auto Scan
Manual Program
Press the CH UP button or CH
NO
using an antenna to receive TV.
Return
Adjust
DOWN button to select AIR TV when
Menu
Next
PC
TV Setting
CATV STD
TV/CATV
MTS
DUAL
YES
NO
Auto Program
Manual Program
Press the CH UP button or CH
DOWN button to select CATV STD
(default) when connected to cable.
Return
Adjust
Receiving Cable TV
Menu
Next
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the TV Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
46
MTS
1 Press MENU to enter the OSD
PC
TV Setting
CATV STD
TV/CATV
MTS
Main
YES
NO
Auto Program
Manual Program
Return
Adjust
Menu
Next
menus.
2 Press the CH UP button or CH
DOWN button to select TV Setting.
3 Press MENU to enter the TV Setting menu.
4 Press MENU to select MTS. The
following choices are available.
PC
TV Setting
CATV STD
TV/CATV
MTS
Main
YES
NO
Auto Program
Manual Program
Menu
DOWN button to select Main
(default), the default audio signal
Next
PC
TV Setting
CATV STD
TV/CATV
MTS
SAP
YES
NO
Auto Program
Manual Program
SAP
Press the CH UP button or CH
DOWN button to select SAP (Secondary Audio Program), an audio
channel used with the NTSC TV stan-
Return
Adjust
Press the CH UP button or CH
belonging to a particular channel.
Return
Adjust
MAIN
Menu
Next
dard for auxiliary transmission of such
items as foreign language broadcasting.
47
PC
TV Setting
CATV STD
TV/CATV
MTS
Dual
YES
NO
Auto Program
Manual Program
Return
Adjust
Menu
Next
DUAL
Press the CH UP button or CH
DOWN button to select Dual, which
enables broadcast of the main signal
on one speaker, and the alternate
audio signal on the other speaker.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the TV Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
48
Auto Program
1 Press MENU to enter the OSD
PC
menus.
TV Setting
CATV STD
TV/CATV
MTS
Dual
YES
NO
Auto Program
Manual Program
DOWN button to select TV Setting.
3 Press MENU to enter the TV Set-
Return
Adjust
2 Press the CH UP button or CH
Menu
Next
ting menu.
4 Press MENU to select Auto Program.
5 Press the CH DOWN button to select
Yes.
Channel indicator values scans from 2
to 69 (antenna connection) or from 1 to
125 (CATV cable connection).
Channel
Indicator
Auto Program...
CATV
190
8%
49
Manual Program
This function allows you to search preset channels and erase channels.
1 Press MENU to enter the OSD
PC
menus.
TV Setting
CATV STD
TV/CATV
MTS
Dual
YES
NO
Auto Program
Manual Program
Menu
DOWN button to select TV Setting.
3 Press MENU to enter the TV Set-
Return
Adjust
2 Press the CH UP button or CH
Next
ting menu.
4 Press MENU to select Manual Program.
5 Press the CH UP button to enter the
PC
Manual Program 2
Manual Program Down
Add/Erase
Add
Up
Erase
Manual Program menu.
6 Press the CH UP button and the CH
DOWN button to find the channel
Return
Adjust
Menu
Next
you want to add.
When you have found the channel, see
the next section “Channel Add/Erase”
to add or erase the channel.
50
Channel Add/Erase
After you have found a channel using Manual Program, follow the following
instruction to add or erase the channel.
1 Press MENU to select Add/Erase.
PC
Manual Program 2
Manual Program Down
Add/Erase
Add
Up
Erase
Return
Adjust
Menu
Next
2 Select one of the following options.
Add Channel
Press the CH DOWN button to select
Add. The channel is added to the
channel list.
Erase Channel
Press the CH UP button to select
Erase. The channel is erased from
the channel list.
When you return to the normal TV
screen and use the CH UP button
and the CH DOWN button to browse
channels, a deleted channel (for
example, Channel 3) is skipped automatically.
Note
You can still access a deleted channel by
entering the channel number using the
number keys on the remote control.
51
PC Setting
PC
PC Setting
MENU
< CH >
50
16
0
1688
H.Position
V.Position
Phase
Clock
More Option
Return
Select
Press the MENU button to enter
the OSD menus.
Menu
OK
1 Connect product to a PC.
2 Press SOURCE to select PC.
3 Press the CH UP or CH
DOWN button to select PC.
4 Press MENU to enter the PC
menu.
52
Horizontal Position
1 Press MENU to enter the OSD
PC
menus.
PC Setting
50
16
0
1688
H.Position
V.Position
Phase
Clock
Color Temp
Return
Adjust
Menu
Next
2 Press the CH UP button or CH
DOWN button to select PC Setting.
3 Press MENU to enter the PC Setting menu.
4 Press the CH UP button to move the
display to the right. Press the CH
DOWN button to move the display to
the left.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the PC Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
53
Vertical Position
1 Press MENU to enter the OSD
PC
menus.
PC Setting
50
16
0
1688
H.Position
V.Position
Phase
Clock
More Option
Return
Adjust
Menu
Next
2 Press the CH UP button or CH
DOWN button to select PC Setting.
3 Press MENU to enter the PC Setting menu.
4 Press MENU to select V.Position.
5 Press the CH UP button to move the
display up. Press the CH DOWN button to move the display down.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the PC Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
54
Phase
1 Press MENU to enter the OSD
PC
menus.
PC Setting
50
16
0
1688
H.Position
V.Position
Phase
Clock
More Option
Return
Adjust
Menu
Next
2 Press the CH UP button or CH
DOWN button to select PC Setting.
3 Press MENU to enter the PC Setting menu.
4 Press MENU to select Phase.
5 Press the CH UP button to increase
the phase. Press the CH DOWN button to decrease the phase.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the PC Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
55
Clock
1 Press MENU to enter the OSD
PC
menus.
PC Setting
50
16
0
1688
H.Position
V.Position
Phase
Clock
More Option
Return
Adjust
Menu
Next
2 Press the CH UP button or CH
DOWN button to select PC Setting.
3 Press MENU to enter the PC Setting menu.
4 Press MENU to select Clock.
5 Press the CH UP button to increase
the clock. Press the CH DOWN button to decrease the clock.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the PC Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
56
Color Temperature
1 Press MENU to enter the OSD
PC
menus.
PC Setting
50
16
0
1688
H.Position
V.Position
Phase
Clock
More option
Return
Adjust
Menu
Next
2 Press the CH UP button or CH
DOWN button to select PC Setting.
3 Press MENU to enter the PC Setting menu.
4 Press MENU to select the More
option.
PC
More Option
DOS Mode
Color Temp
Text
Standard
Return
Adjust
Menu
Next
5 Press the CH UP button to enter the
Color Temp menu.
6 Press MENU to select Color Temp.
Warm
Press the CH DOWN button to select
Warm.
Standard
Press the CH UP button or CH
DOWN button to select Standard.
Cold
Press the CH UP button to select
Cold.
57
User
PC
More Option
DOS Mode
Color Temp
User R :
User G :
User B :
Text
User
30
30
30
Return
Adjust
Menu
Next
The User option enables users to
make their own color settings.
Press the CH UP button to select
User. The user menu appears.
– Press MENU to select User R,
User G, or User B.
– Press the CH UP button or the CH
DOWN button to increase or
decrease the selected color temperature.
7 Press MENU to select Return.
8 Press the CH DOWN button to exit
the More Option menu.
Note
The new setting is confirmed automatically
when the OSD times out.
58
Miscellaneous Setting
PC
Miscellaneous
MENU
< CH >
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
Return
Select
Press the MENU button to enter
the OSD menus.
Menu
OK
1 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
2 Press MENU to enter the Miscellaneous menu.
59
Language
PC
Miscellaneous
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
menus.
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
Return
Select
1 Press MENU to enter the OSD
Menu
OK
3 Press MENU to enter the Miscellaneous menu.
4 Press the CH UP button or CH
DOWN button to select Chinese or
English.
5 Press MENU to select Return.
6 Press the CH DOWN button to exit
the Miscellaneous menu.
Note
The default language setting is Traditional Chinese.
60
Sleeper
The Sleeper turns the TV off automatically after a set period of time.
1 Press MENU to enter the OSD
PC
Miscellaneous
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
Return
Adjust
menus.
Menu
Next
3 Press MENU to enter the Miscellaneous menu.
4 Press MENU to select Sleeper.
5 Press the CH UP button or CH
DOWN button to select a power off
time:
–
–
–
–
–
OFF
30 minutes
60 minutes
90 minutes
120 minutes
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Miscellaneous menu.
61
OSD Display
When set to Off, the OSD display (source data on top left corner of the TV
screen) turns off after approximately 5 seconds. When set to On, the OSD
does not turn off automatically..
PC
Miscellaneous
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
menus.
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
Return
Adjust
1 Press MENU to enter the OSD
Menu
Next
3 Press MENU to enter the Miscellaneous menu.
4 Press MENU to select OSD
Display.
5 Press the CH DOWN button to
select On. Press the CH UP button
to select Off.
6 Press MENU to select Return.
7 Press the CH DOWN button to exit
the Miscellaneous menu.
62
Time Setting
This setting allows you to set the TV clock.
1 Press MENU to enter the OSD
PC
menus.
Miscellaneous
English
OFF
ON
OFF
Language
Sleeper
OSD Display
Time Setting
More Option
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
Return
Adjust
Menu
Next
3 Press MENU to enter the Miscellaneous menu.
4 Press MENU to select Time Setting.
5 Press the CH UP button to enter the
Time Setting menu.
6 Press MENU to select the Hour or
PC
Time Setting
00
00
Hour :
Minute :
Minute.
7 Press the CH UP button or CH
DOWN button to decrease or
Return
Adjust
Menu
Next
increase the time.
8 Press MENU to select Return.
9 Press the CH DOWN button to exit
the Time Setting menu.
Note
The new setting is confirmed automatically
when the OSD times out.
63
OSD Background
This setting allows you to make the OSD background transparent or
opaque.
1 Press MENU to enter the OSD
PC
Miscellaneous
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
Return
Adjust
Menu
menus.
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
3 Press MENU to enter the Miscella-
Next
neous menu.
4 Press MENU to select More
Options.
5 Press the CH UP button to enter the
PC
More Option
OSD background
Reset
ON
OFF
More Options menu.
6 Press MENU to select OSD background.
7 Press the CH DOWN button to make
Return
Adjust
Menu
Next
the background transparent. Press
the CH UP button to make the background opaque.
8 Press MENU to select Return.
9 Press the CH DOWN button to exit
the More Options menu.
Note
The new setting is confirmed automatically
when the OSD times out.
64
Reset
The Reset function returns all of your TV’s user settings to their factory
defaults.
Warning:
The reset function will erase all of your custom and favorite channel
settings, and will reset all display settings (such as contrast, brightness, etc.) to the factory default values. The reset function cannot be
reversed once it begins.
1 Press MENU to enter the OSD
PC
Miscellaneous
Language
Sleeper
OSD Display
Time Setting
More Option
English
OFF
ON
OFF
menus.
2 Press the CH UP button or CH
DOWN button to select
Miscellaneous.
Return
Adjust
Menu
Next
3 Press MENU to enter the Miscellaneous menu.
4 Press MENU to select More Option.
5 Press the CH UP button to enter the
PC
More Option
OSD background
Reset
ON
OFF
More Option menu.
6 Press MENU to select Reset.
7 Press the CH DOWN button to reset
Return
Adjust
Menu
Next
the OSD settings.
65
Reset ...
By default, OFF is already selected
(highlighted in yellow). The TV immediately resets when ON is selected
and you see the message on the
screen.
8 Press MENU to select Return.
9 Press the CH DOWN button to exit
the More Option menu.
66
12
Taking Care of Your TV
Turn the power off before you begin cleaning the
TV.
For best results, use a clean lens cloth to
remove dust and fingerprints from the screen.
GAS
OIL
Do not wipe the shell of the TV with alcohol,
methanol, gasoline or oil products to avoid damaging the finish. Wipe the shell with a dry soft
cloth and use neutral cleaning fluids.
If your model has leather components, wipe the
leather parts with a dry cloth and keep the area
dry. Place the TV far from sources of steam to
avoid making the leather wet.
Be careful to remove the power plug correctly.
Hold the plug instead of pulling the power cord.
Arrange the power cord with other cords to avoid
knotting or bending which may cause fire due to
damage or electric leakage.
67
13
Troubleshooting
Situation
Solution
•
•
•
No picture and sound.
•
•
•
No picture, or poor picture, sound is OK.
Picture is not in color.
Picture is OK, no sound.
One of the speakers has no sound.
Can’t receive some TV channels using
cable TV.
Want to reset TV settings.
•
•
Check the antenna and cable connections.
Adjust the brightness in the OSD menus.
See “Brightness” on page 32.
•
Adjust the saturation in the OSD menus.
See “Saturation” on page 42.
•
Press the VOL UP button on the control
panel or remote control.
Make sure the MTS option is set to Main or
Dual. See “MTS” on page 47.
•
•
Adjust the balance in the OSD menus. See
“Balance” on page 37.
•
Try the Auto Program function in the OSD
“TV Setting” menu. See “Auto Program” on
page 49.
•
Use the Reset function in the OSD menu.
•
If OSD items are colored in light blue, the
system is in a state such that those settings
are not available.
•
Make sure the video signal cable is connected properly.
Cannot operate menus.
No image but have sound.
68
Connect the power cord properly.
Press the POWER button on the control
panel or remote control.
Press the SOURCE button to cycle through
connected video sources.
Press CH UP or CH DOWN to switch to
other TV stations.
Check the TV/CATV OSD settings. See
“TV/CATV” on page 46.
Make sure all cables are connected properly.
Situation
Solution
•
No sound but have image.
•
•
•
Screen image turns over.
Snow appears on the screen.
Blurred or overlapped images.
Make sure the source device is functioning
properly.
Set the volume to a higher level.
Make sure the audio cable is connected
securely.
Turn the mute off.
•
Make sure the video signal cable is connected properly.
•
Adjust the location of the antenna, placing it
far from roads or sources of interference.
Check the antenna and the video signal line
connections.
•
•
•
•
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or
change the video signal cable.
69
14
Specifications
LT0G-15A1
LCD Panel Size
15-inch TFT
Aspect Ratio
4:3
Best Resolution
1024 (horizontal) x 768 (vertical)
Maximum Display Area
304.1 mm (H) x 228.1 mm (W)
TV System
NTSC
Video System
VGA input (15 pin D-SUB), S-Video Input and Composite Video Input (through the 4-IN-1 cable)
Audio System
Line in
10-pin mini-DIN (Audio Input through the 4-IN-1 Cable)
3.5 mm ø headphone jack x 1 (Audio Output)
Built-in Speakers
3W + 3W
Power Supply
100-240V, 50/60 Hz, 12V DC
Power Consumption
60 W Maximum
Power Consumption (Standby)
5W Maximum
Optional Accessories
External Speakers
Weight (including base)
4.2 kg
Dimensions (including base)
465 mm (H) x 355 mm (W) x 220 mm (D)
PC Mode Support Timing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
70
Pixel Format Hor. Freq. (kHz) Hor. Polarity Ver. Freq. (Hz) Vertical Polarity
Standard
640*400
31.47
70
+
DOS_Graphic
720*400
31.47
70
+
DOS_Text
640*480
31.47
60
VESA
640*480
37.861
72
VESA
640*480
37.5
75
VESA
800*600
35.156
+
56
+
VESA
800*600
37.879
+
60
+
VESA
800*600
48.077
+
72
+
VESA
800*600
46.875
+
75
+
VESA
1024*768
48.363
60
VESA
1024*768
56.476
70
VESA
1024*768
60.023
+
75
+
VESA
832*624
49.7
75
MAC
1024*768
60.2
75
MAC
640*480
35
67
MAC
15
Glossary
Aspect Ratio The ratio of width to height of a film, image or display screen.
Broadcast TV Broadcasting video signals using high-frequency electromagnetic
waves to distribute television channels to viewers (standard TV broadcast).
CATV Community Antenna Television, the original name for cable TV. A television
distribution system that uses coaxial cable instead of the traditional radio broadcasting (over-the-air) method to deliver television, FM radio, and other services to
consumers.
Color Temperature Adjusting the color temperature enables you to set the intensity of white light. Color temperature is measured in Kelvin (K). Higher color temperatures result in a blue tint. Lower temperatures result in a red tint.
DUAL Used with SAP and NTSC, enables broadcast of the main broadcast signal
on one speaker, and the alternate audio speaker on the other speaker.
Hue Colors in a color system are measured by hue, saturation and luminance.
Hue indicates the predominant color.
LCD Liquid Crystal Display. A display technology that uses rod-shaped molecules
(liquid crystals) that flow like liquid and bend light.
Main is the default audio signal belonging to a particular channel.
MTS Multi-channel Television Sound. Enables reception of audio other than the
primary (MAIN) audio signal. DUAL enables reception of a stereo audio signal,
while SAP (Second Audio Program) enables reception of a separate channel that
may be a different language or completely different information such as the news.
RCA connector An RCA or phono connector is a plug and socket for a two-wire
(signal and ground) coaxial cable that is widely used to connect audio and video
components. RCA sockets are commonly found at the rear of audiovisual equipment.
RCA jack An RCA jack enables you to attach the 4-IN-1 cable to a device socket.
Refer to “Checking Package Contents” on page 17 and “Connecting to a Game
Device” on page 24.
SAP (Secondary Audio Program) is an audio channel used with the NTSC TV
standard for auxiliary transmission of such items as foreign language broadcasting
or teletext.
Saturation Chromatic purity indicating the amount of white contained in a color.
Fully saturated colors are pure colors; less saturated colors appear as pastel
shades.
S-Video Super-video, a video cabling standard used to transmit video by keeping
brightness (Y) and color information (C) on separate channels. Most often used
with camcorders, VCRs, and quality receivers and amplifiers to provide sharper pictures.
VCD A compact disk format developed in 1993 by Sony and Philips to capture fullmotion video. A standard Video CD can hold 74 minutes of near VHS-quality video
and CD-quality sound.
71
is a trademark of
SRS Labs, Inc.
SRS technology is incorporated under license from SRS
Labs, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement