State Industries Sandblaster SCGSS00407 User's Manual

Add to my manuals
2 Pages

advertisement

State Industries Sandblaster SCGSS00407 User's Manual | Manualzz

C O M M E R C I A L

80% Thermal Efficiency

Front, Top or Rear Water Connections

Hydro Cannon Self-Cleaning Device

Complies with SCAQMD Rule 1146.2

Southern California and Texas Apporved

State Water Heaters’ Sandblaster is the original Self-Cleaning commercial gas water heater, with a proven design that automatically reduces sediment buildup, the number one threat to any water heater’s life expectancy and energy-efficiency.

The new computer designed Hydro Cannon self-cleaning device injects cold water into the tank under pressure and then uses a venturi action to create self-cleaning turbulence. Self-Cleaning action keeps sediment in suspension, and keeps it moving, so it does not get a chance to settle down. Sediment that would otherwise build up in the tank is harmlessly carried out when hot water is drawn. With reduced sediment buildup, Sandblaster commercial water heaters retain their rated efficiency longer, last longer, and help keep water heating costs down!

Anodes – Long lasting stainless steel core anodes.

On/Off Power Switch – Eliminates the need to wire a separate electrical connection box.

Intermittent Ignition Device – Eliminates standing pilot and provides flame failure response in less than one second.

Glass Lined Tank – Glass is applied after the complete tank has been assembled to give a seamless barrier against corrosion by hot water.

3-Year or Optional 5-Year Tank Warranty.

Low NO

– Complies with SCAQMD Rule 1146.2. Southern Califorina and Texas Approved.

ASME Construction

available on 200,000 thru 500,000 Btu sizes.

Induced Draft Built-In Blower

– Blower is built into the top cover, factory mounted and wired. No draft hood or barometric damper required.

Hydro Cannon Self-Cleaning Feature

– New computer designed device automatically reduces harmful sediment buildup inside the tank. Sandblaster ® SBN ™ stays energy-efficient, so it saves money throughout its life.

Foam insulation

– Reduces heat loss over 2-1/2 times more effectively than standard fiberglass.

CSA Certified and ASME Rate T&P Relief valve

Factory-installed Energy Cut-Off (“ECO”) safety switch.

Tank Inspection Port

for easy access to tank interior on all models.

Maximum Hydrostatic Working Pressure: 160 psi.

Three Water Connection Options

– Inlet and outlet connections are located on the top, front and rear offering installation flexibility (Hydro Cannon device on front connection only).

Fully Tested for Safety and Performance – Design certified by the Underwriter’s

Laboratory for 180°F hot water service. Meets rigid requirements of the National Sanitation

Foundation when equipped with optional leg kit. Certified for use on combustible flooring.

Meets or exceeds the thermal efficiency and/or standby loss requirements of the U.S.

Department of energy and current addition of ASHRAE/IESNA 90.1.

Options:

– Leg Kit for UL Sanitation to Meet NSF 5 – Kit #9003425205.

– Manifold Kits for Multiple Gas Heater Installations:

Dual Manifold Kit #9003426205

Triple Manifold Kit #3003427205

Quad Manifold Kit #3003428205

For more information on Sandblaster ® contact:

State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com

SCGSS000407 August 2008R

C O M M E R C I A L

Model Number

SBN71 120NE

SBN81 154NE

SBN100 180NE

SBN100 199NE

SBN100 200NES

SBN100 200NES A

SBN100 250NE

SBN100 250NE A

SBN100 275NE

SBN100 275NE A

SBN85 310NE

SBN85 310NE A

SBN85 366NE

SBN85 366NE A

SBN85 390NE

SBN85 390NE A

Gallon

Cap.

I n p u t

Rate

BTUH

71 120,000

81 154,000

100 180,000

100 199,000

100 200,000

100 200,000

100 250,000

100 250,000

100 275,000

100 275,000

85 310,000

85 310,000

85 366,000

85 366,000

85 390,000

85 390,000

First Hour

D e il v e r

Gallons y

100° Rise

337

337

360

360

415

415

438

438

166

206

245

263

263

263

312

312

R e c o v e r y

80° 100° 140° A B C D E F

145 116 83 63 4 1 /

4

59 1 /

2

50 7 /

8

19 5 /

8

19

187 149 107 70 4 1 /

4

66 1 /

2

57 7 /

8

19 5 /

8

19

218 175 125 70 4 1 /

4

66 1 /

2

57 7 /

8

19 5 /

8

19

241 193 138 67 4 1 /

4

66 1 /

2

57 7 /

8

19 5 /

8

19

241 193 138 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

241 193 138 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

303 242 173 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

303 242 173 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

333 267 190 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

333 267 190 72 4 1 /

2

70 61 5 /

8

20 1 /

2

21

376 300 215 73 4 1 /

2

72 61 5 /

8

20 1 /

2

21

376 300 215 73 4 1 /

2

72 61 5 /

8

20 1 /

2

21

444 355 254 73 4 1 /

2

72 62 1 /

2

22 1 /

2

21

444 355 254 73 4 1 /

2

72 62 1 /

2

22 1 /

2

21

473 378 270 73 4 1 /

2

72 62 1 /

2

22 1 /

2

21

473 378 270 73 4 1 /

2

72 62 1 /

2

22 1 /

2

21

D i m e n s i o n s i n I n c h e s

G H I J

Approx.

S h i p p i n

Weight g

(lbs.)

1 /

2

51 7 /

8

5 27 3 /

4

400

1 /

2

59 6 27 3 /

4

470

1 /

2

59

1 /

2

59

6 27 3 /

4

470

6 27 3 /

4

470

1

1 /

2

61 1 /

2

6 27 3 /

4

603

/

2

61 1 /

2

6 27 3 /

4

1

1 /

2

61 1 /

2

6 27 3 /

4

603

/

2

61 1 /

2

6 27 3 /

4

1

1 /

2

61 1 /

2

6 27 3 /

4

603

/

2

61 1 /

2

6 27 3 /

4

1

1 /

2

61 1 /

2

6 27 3 /

4

603

/

2

61 1 /

2

6 27 3 /

4

3 /

4

63

3 /

4

63

3 /

4

63

3 /

4

63

6 27 3 /

4

725

6 27 3 /

4

6 27 3 /

4

725

6 27 3 /

4

Approx.

A S M E

Weight

(lbs.)

625

625

833

833

625

625

Model Number Top

SBN71 120NE

SBN81 154NE

SBN100 180NE

SBN100 199NE

SBN100 200NES

SBN100 200NES A 1 1 /

2

SBN100 250NE

1 1 /

2

1

1

1 1 /

2

1

1

1

1

/

1 1 /

2

/

/

2

2

2

SBN100 250NE A 1 1 /

2

SBN100 275NE 1 1 /

2

SBN100 275NE A 1 1 /

2

SBN85 310NE 1 1 /

2

SBN85 310NE A

SBN85 366NE

1 1 /

2

1 1 /

2

SBN85 366NE A

SBN85 390NE

1 1 /

2

1 1 /

2

SBN85 390NE A NA

Water Connections In Inches

Inlet

Front Rear Top

Outlet

Front

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

NA

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

NA

2

2

2

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

2

2

2

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

Rear

2

2

2

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

2

2

2

2

1 1 /

2

1 1 /

2

1 1 /

2

1 1 /

2

Sandblaster ® SBN ™ Sample Specifications

Gas water heater(s) shall be a State Water Heaters’ Sandblaster

____________________

® SBN ™ Model Number,

, with a gallon storage capacity, an input rate of

Btu/Hour gas, and a recovery rate of gallons per hour at a

degree Fahrenheit temperature rise.

Units shall have hot surface ignition requiring a 120VAC/5AMP power supply, fan-assisted combustion, and easily removable tubular stainless steel burner tube with individual orifices.

The ignition control shall have integrated self-diagnostic capability and must prove combustion fan operation for system to operate. The units comply with SCAQMD Rule 1146.2, Southern

California and Texas approved. The water heater(s) shall not use flame impingement or flame quenching as a means of controlling NO

X emissions. The water heater tank shall be additionally protected against premature failure in the following ways:

1. A -year limited warranty against failure due to corrosion, metal fatigue or overheating caused by the buildup of scale, film or other sediment.

2. Against electrolytic corrosion by multiple, factory-installed anodes.

3. Against failure due to overheating caused by the buildup of scale, film and other sediment by a self cleaning device. The device shall be properly positioned so that it directs the flow of inlet water in such a way that microscopic particles of precipitated solids shall be kept in suspension and exhausted from the water heater on that or successive hot water draws.

The burner(s) shall have an individual orifice for each burner tube and be constructed of tubular aluminized or stainless steel mounted in an easily removable tray.

Water heater(s) shall have the UL seal of certification, a working pressure of 160 psi, CSA Certified and

ASME rated T&P relief valve, and a 2 3 ⁄

4

˝ x 3 3 ⁄

4

˝ tank inspection port.

For more information on Sandblaster ® contact:

State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com

SCGSS000407 August 2008R

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement