Gas
Revised: 'HF, 2016
DESIGN GUIDE
FOOD SERVICE & GUEST LAUNDRY EQUIPMENT
PRODUCT MANUAL (New Build and Renovations)
THESE ARE JUST
GUIDE LINES FOR
TRIMMING
+
DESIGN GUIDE
FOOD SERVICE &
GUEST LAUNDRY EQUIPMENT
PRODUCT MANUAL
 NEW BUILD (All Building Sizes) 
Gen 4
 RENOVATION (All Building Sizes) 
Gen 1, 2, & 3
MARRIOTT INTERNATIONAL
Design & Construction Services
Revised: 'HF 2016
Food Service
Equipment Matrix
Mark #
Description
TownePlace Suites
Location
Rev#
Date of Rev
Change
Bulletin #
1
2
6/6/2016
12/2/2016
16679
16766
Food Service
023
033
038
041
042
046
048
050
051
052
053
059
063
098
099
100
105
111
112
114
117
118
119
126
140
143
148
151
155
551
552
Shelving - Dry Storage Shelving
Spray Rinse
Dishwasher - Undercounter
Pot Rack with Wall Shelf
Shelving - Pan and China
Pot Sink
Undercounter Freezer
Freezer - Two-Door Reach-In
Refrigerator - Single-Door Reach-In
(For Gen1/Gen2 Renovation Only)
Refrigerator - Two-Door Reach-In
Freezer - Single Door Reach-In
Refrigerator - Compact
Table - Prep with Backsplash
Dry Cereal Display
Induction Warmers
Hot/Cold Pan
Coffee Airpot Brewer
Microwave Oven
Microwave Shelf
Waffle Irons
Toaster
Juice Chillers
Garbage Cans
Hand Lavatory
Bread Display
Counter Refrigerator
Pop-Up Toaster
Buffet - Counter
Buffet - Waste Chute
Ice Dispenser
Vending / Soda Machine
In a Pinch
611
628
629
636
637
Dry Millwork Case
Refrigerator - Glass Door
Refrigerator - Glass Door
Freezer - Glass Door
Refrigerator - Glass Door
Guest Laundry
411
Guest Washer
412
Guest Dryer
413
Folding Table
414
Guest Dryer - Gas
415
Guest Washer (ADA)
416
Guest Dryer - Electric (ADA)
417
Guest Dryer - Gas (ADA)
418
Stacked Guest Dryer - Electric
419
Stacked Guest Dryer - Gas
06/06/2016
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Kitchen
Buffet
Buffet
Buffet
Kitchen
Kitchen
Kitchen
Buffet
Buffet
Buffet
Buffet
Kitchen
Buffet
Buffet
Buffet
Buffet
Buffet
Vending
Vending
In a Pinch
In a Pinch
In a Pinch
In a Pinch
In a Pinch
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Guest Laundry
Page 1
FOOD SERVICE
Shelving - Dry Storage Shelving
Mark #
023
MANUFACTURER Metro
MODEL #
Super Erecta Brite
FEATURES
- Verify size and quantity of units per plan.
- 74P posts with caps and adjustable feet.
- (6) shelves high.
- Locate bottom shelf +10" AFF and evenly space the balance of the shelves.
AREA
Back of House
LOCATION
FINISH
Super Erecta Brite
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
07/01/10
TOWNEPLACE SUITES
MARK# 023
023
®
Item # ______________________________________________
®
WIRE SHELVING
Super Adjustable Super Erecta Wire Shelving is the most advanced
and innovative wire storage system available. A unique Corner Release
System and SiteSelect™ Posts make changing shelf levels fast and
easy, without tools! And Super Adjustable Shelving works in
conjunction with the entire Super Erecta System of shelves and
accessories.
• Easily Adjustable: Unique Corner Release and SiteSelect Posts
create a total system that offers “Tool-Free,” fast adjustment at 1"
(25mm) intervals along the entire height of the posts.
• Easily Assembled: The Corner Release System and SiteSelect
Posts, combined with the original “bottom up” assembly process,
creates a complete shelving system in minutes, without tools!
SiteSelect Posts with the double-groove visual guide feature, have
circular grooves at 1" (25mm) intervals and are numbered at 2"
(50mm) intervals. Shelves simply seat into place using the Corner
Release.
• Unique Shelf Design: The open wire design of these heavy-gauge
shelves minimizes dust accumulation and allows a free circulation of
air, greater visibility of stored items and greater light penetration.
Shelf ribs run front to back allowing you to slide items on and off
easily. Shelves can be loaded and unloaded from all sides. This open
contruction allows use of maximum storage space of cube.
SUPER ADJUSTABLE SUPER ERECTA SHELF®
SUPER ADJUSTABLE SUPER ERECTA SHELF®
Adjustable Wire Shelving
Job ________________________________________________
Dry Storage – Chrome or Super Erecta Brite™
• Unique Post Design: New SiteSelect post design provides
a visual guide for positioning and adjusting shelves, saving
considerable time during assembly and adjustment. An
easy-to-identify double groove, every 8" (203mm), offers a quick way
to align all shelves. Bolt leveler on post bottom compensates for
uneven surfaces.
• Fast, Easy Reconfiguration: Super Adjustable Super Erecta can
change as quickly as your needs change. By using various
accessories, hundreds of shelving configurations become possible.
• Choice of Finishes: Super Adjustable
Super Erecta Wire Shelving is available
in a variety of finishes: Super Erecta Brite
and chrome-plated for dry storage,
Metroseal 3™ with antimicrobial product
protection, and stainless steel for corrosive
environments, and a large array of designer
colors (see Catalog Sheet 10.14A).
*MICROBAN and the MICROBAN symbol are registered
trademarks of the Microban Products Company,
Huntersville, NC.
®
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Metroseal 3™ with *Microban® Antimicrobial
Product Protection.
10.01A
Corner Release System
10.01A
023
Job ________________________________________________
®
SUPER ADJUSTABLE SUPER ERECTA SHELF®
WIRE SHELVING
Dimensions
Super Adjustable Super Erecta Wire Shelving
Shelf Width/Length
(in.)
(mm)
18x24
18x30
18x36
18x42
18x48
18x54
18x60
18x72
21x24
21x30
21x36
21x42
21x48
21x54
21x60
21x72
24x24
24x30
24x36
24x42
24x48
24x54
24x60
24x72
Approx. Pkd. Wt.
(lbs.)
(kg)
457x610
457x760
457x914
457x1066
457x1219
457x1370
457x1524
457x1825
530x610
530x760
530x914
530x1066
530x1219
530x1370
530x1524
530x1825
610x610
610x760
610x914
610x1066
610x1219
610x1370
610x1524
610x1825
7
8
91/2
11
12
141/2
17
20
8
9
11
12
14
16
18
24
9
11
13
15
16
18
21
26
3.2
3.6
4.3
5.0
5.4
6.6
7.7
9.1
3.6
4.1
5.0
5.4
6.4
7.3
8.2
10.9
4.1
5.0
5.9
6.8
7.3
8.6
9.5
11.8
Cat. No.
Super Erecta Brite
Cat. No.
Chrome
Cat. No.
Metroseal 3
Cat. No.
Stainless
A1824BR
A1830BR
A1836BR
A1842BR
A1848BR
A1854BR
A1860BR
A1872BR
A2124BR
A2130BR
A2136BR
A2142BR
A2148BR
A2154BR
A2160BR
A2172BR
A2424BR
A2430BR
A2436BR
A2442BR
A2448BR
A2454BR
A2460BR
A2472BR
A1824NC
A1830NC
A1836NC
A1842NC
A1848NC
A1854NC
A1860NC
A1872NC
A2124NC
A2130NC
A2136NC
A2142NC
A2148NC
A2154NC
A2160NC
A2172NC
A2424NC
A2430NC
A2436NC
A2442NC
A2448NC
A2454NC
A2460NC
A2472NC
A1824NK3
A1830NK3
A1836NK3
A1842NK3
A1848NK3
A1854NK3
A1860NK3
A1872NK3
A2124NK3
A2130NK3
A2136NK3
A2142NK3
A2148NK3
A2154NK3
A2160NK3
A2172NK3
A2424NK3
A2430NK3
A2436NK3
A2442NK3
A2448NK3
A2454NK3
A2460NK3
A2472NK3
A1824NS
A1830NS
A1836NS
A1842NS
A1848NS
A1854NS
A1860NS
A1872NS
A2124NS
A2130NS
A2136NS
A2142NS
A2148NS
A2154NS
A2160NS
A2172NS
A2424NS
A2430NS
A2436NS
A2442NS
A2448NS
A2454NS
A2460NS
A2472NS
Adjustable Wire Shelving
SUPER ADJUSTABLE SUPER ERECTA SHELF®
NOTE: For Metroseal 3 shelving information see sheet # 10.10A.
SiteSelect™ Posts
Sleeves/Wedges
Package of 4 per shelf.
Cat. No. A9985
SiteSelect™ Posts are
grooved at 1" (25mm)
increments and numbered
at 2" (50mm) increments.
Posts are double-grooved
every 8" (203mm) for easy
identification. Wedge
Windows™ allow sight of
post number for easy
visual identification.
*MICROBAN® protects the Metroseal 3 coating from
bacteria, mold, mildew and fungi that cause odors, stains
and product degradation.
*MICROBAN and the MICROBAN symbol are registered
trademarks of the Microban Products Company, Huntersville, NC.
Height*
(in.)
(mm)
1
7 /2
141/2
271/2
341/2
549/16
629/16
745/8
865/8
965/8
191
370
700
875
1385
1590
1895
2200
2454
Approx. Pkd. Wt.
(lbs.)
(kg)
1
/2
1
13/4
2
3
31/2
4
5
51/2
0.3
0.5
0.75
0.9
1.4
1.6
1.8
2.3
2.5
Cat. No.
Plated
7P
13P
27P
33P
54P
63P
74P
86P
**96P
Cat. No.
Metroseal 3
Cat. No.
Stainless
13PK3
33PS
27PS
33PS
54PS
63PS
74PS
86PS
33PK3
54PK3
63PK3
74PK3
86PK3
* Height includes leveling bolt and cap.
** 96P should not be used in units less than 24" (610mm) deep.
Consult Metro Engineering for alternate recommendations.
Post lengths to be specified as cut to a round number, ie: 74P cut to 69". . .
This will result in an overall post height with adjustment of 693/8 to 697/8.
Important: When ordering by components remember that for
maximum stability, units should be kept as wide and low as possible.
®
All Metro Catalog Sheets are available on our Web Site: www.metro.com
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
L02-006A
Printed in U.S.A. Rev. 1/03
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2003 InterMetro Industries Corp.
Spray Rinse
Mark #
033
MANUFACTURER Fisher
MODEL #
89745
FEATURES
- Manufacturer's standard unit 2210-1WB.
- Ultra-spray valve with knife spray pattern.
- Include wall bracket.
- Provide Fisher Model #2932-0002 in-line dual check valve; provide additional
vacuum breaker per local code.
AREA
Back of House
LOCATION
Kitchen
FINISH
ELECTRICAL
CONNECTION
VOLTS
ROUGH-IN HEIGHT
HP
KW
AMPS
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
1/2", +12"
CW
1/2", +12"
WASTE
ROUGH-IN COMMENTS Opt. by Locality
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 033
033
SPECIFICATION BOOK
FISHER MANUFACTURING COMPANY • TOLL FREE: 800-421-6162 • FAX: 800-832-8238 • www.fisher-mfg.com
20
Dishwasher - Undercounter
Mark #
038
AMPS
Vfy.
MANUFACTURER Hobart
MODEL #
LXe
FEATURES
- Verify if hot water or chemical sanitizing.
- Verify need for booster heater.
- Only hot water sanitizing unit is Energy Star rated.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
JB
VOLTS
120/208
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +18"
HP
KW
PHASE
6KW booster heater if required
PLUMBING
HW
1/2", +12"
CW
WASTE
IW, 1", to FS
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 038
038
038
038
038
Pot Rack with Wall Shelf
Mark #
041
MANUFACTURER Advance/Tabco
MODEL #
PS-12-___
FEATURES
- Mount with shelf at +6'-0" AFF.
- Verify size by plan.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 041
041
STAINLESS STEEL
POT RACKS
Item #:
Qty #:
Model #:
CEILING MOUNTED
Project #:
L
WALL MOUNTED
36”
48”
60”
72”
84”
96”
108”
120”
132”
144”
Ceiling Mounted
Wall Mounted
18 Pot Hooks per unit.
18 Pot Hooks per unit.
S/S
SC-36
SC-48
SC-60
SC-72
SC-84
SC-96
SC-108
SC-120
SC-132
SC-144
POWDER
COATED
Wt
23
26
29
32
36
44
48
51
55
58
GC-36
GC-48
GC-60
GC-72
GC-84
GC-96
GC-108
GC-120
GC-132
GC-144
36”
48”
60”
72”
84”
96”
108”
120”
132”
144”
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
POWDER
COATED
S/S
L
SW-36
SW-48
SW-60
SW-72
SW-84
SW-96
SW-108
SW-120
SW-132
SW-144
GW-36
GW-48
GW-60
GW-72
GW-84
GW-96
GW-108
GW-120
GW-132
GW-144
Wt
14
16
18
21
24
26
28
31
31
31
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
Shelf with Pot Rack
L
SHELF with
POT RACK
36”
48”
60”
72”
84”
96”
108”
120”
132”
144”
10”
Wide
PS-10-36
PS-10-48
PS-10-60
PS-10-72
PS-10-84
PS-10-96
PS-10-108
PS-10-120
PS-10-132
PS-10-144
Wt
15
25
35
45
55
65
75
85
5
105
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
12”
Wide
Wt
PS-12-36
PS-12-48
PS-12-60
PS-12-72
PS-12-84
PS-12-96
PS-12-108
PS-12-120
PS-12-132
PS-12-144
20
30
40
50
60
70
80
90
100
110
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
15”
Wide
Wt
PS-15-36
25 lbs.
PS-15-48
35 lbs.
PS-15-60
45 lbs.
PS-15-72
55 lbs.
PS-15-84
65 lbs.
PS-15-96
75 lbs.
PS-15-108 85 lbs.
PS-15-120 95 lbs.
PS-15-132 105 lbs.
PS-15-144 115 lbs.
18”
Wide
Wt
PS-18-36
PS-18-48
PS-18-60
PS-18-72
PS-18-84
PS-18-96
PS-18-108
PS-18-120
PS-18-132
PS-18-144
30
40
50
60
70
80
90
100
110
120
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
lbs.
Units 8 ft. and larger are furnished with three (3) sets of tubing supports.
FEATURES:
(Ceiling Mounted)
FEATURES:
FEATURES:
(Wall Mounted)
(Shelf/Pot Rack)
Ceiling suspension with chain hangers.
Optional thresded rod available.
Secured to wall by means of bolts
through welded brackets.
MATERIAL:
MATERIAL:
A dual purpose unit for shelf and utensil
storage.
Secured to wall by means of bolts
through welded brackets.
Flat steel bar is 2” x 1/4”, either stainless
steel or powder coated (as specified).
Flat steel bar is 2” x 1/4”, either stainless
steel or powder coated (as specified).
MATERIAL:
Pot hooks are plated. (18 per unit)
Pot hooks are plated. (18 per unit)
Flat steel bar is 2” x 1/4”.
Pot hooks are plated. (18 per unit)
24” long chain hangers are plated.
CONSTRUCTION:
CONSTRUCTION:
All welded stainless steel units are
blended to a satin finish.
All powder coated units are coated with
FDA approved material.
www.advancetabco.com
All welded stainless steel units are
blended to a satin finish.
All powder coated units are coated with
FDA approved material.
CONSTRUCTION:
All welded stainless steel units are
blended to a satin finish.
NEW YORK
GEORGIA
TEXAS
NEVADA
(800) 645-3166
(800) 832-1218
(800) 527-0353
(800) 446-8684
Fax: (631) 242-6900
Fax: (770) 775-5625
Fax: (972) 932-4795
Fax: (775) 972-1578
For Assistance with
Smart Modifications & Accessories Call:
SMART ENGINEERING RESPONSE TEAM
1-800-498-6634 Fax: 631-586-2933 [email protected]
O-19
DETAILS and SPECIFICATIONS
TOL ± .500”
041
ALL DIMENSIONS ARE TYPICAL
Ceiling Mounted
18 Pot Hooks per unit.
Length
Wall Mounted
18 Pot Hooks per unit.
Length
Shelf with
Pot Rack
18 Pot Hooks per unit.
O-20
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, AUGUST 2003
Shelving - Pan and China
Mark #
042
MANUFACTURER Metro
MODEL #
Super Erecta Brite
FEATURES
- Verify size of unit per plan.
- (5) shelves high.
- 63P posts.
- Locate bottom shelves +10" AFF and evenly space the balance of the shelves.
AREA
Back of House
LOCATION
Kitchen
FINISH
Super Erecta Brite
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 042
®
Item # ______________________________________________
042
®
WIRE SHELVING
Super Adjustable Super Erecta Wire Shelving is the most advanced
and innovative wire storage system available. A unique Corner Release
System and SiteSelect™ Posts make changing shelf levels fast and
easy, without tools! And Super Adjustable Shelving works in
conjunction with the entire Super Erecta System of shelves and
accessories.
• Easily Adjustable: Unique Corner Release and SiteSelect Posts
create a total system that offers “Tool-Free,” fast adjustment at 1"
(25mm) intervals along the entire height of the posts.
• Easily Assembled: The Corner Release System and SiteSelect
Posts, combined with the original “bottom up” assembly process,
creates a complete shelving system in minutes, without tools!
SiteSelect Posts with the double-groove visual guide feature, have
circular grooves at 1" (25mm) intervals and are numbered at 2"
(50mm) intervals. Shelves simply seat into place using the Corner
Release.
• Unique Shelf Design: The open wire design of these heavy-gauge
shelves minimizes dust accumulation and allows a free circulation of
air, greater visibility of stored items and greater light penetration.
Shelf ribs run front to back allowing you to slide items on and off
easily. Shelves can be loaded and unloaded from all sides. This open
contruction allows use of maximum storage space of cube.
SUPER ADJUSTABLE SUPER ERECTA SHELF®
SUPER ADJUSTABLE SUPER ERECTA SHELF®
Adjustable Wire Shelving
Job ________________________________________________
Dry Storage – Chrome or Super Erecta Brite™
• Unique Post Design: New SiteSelect post design provides
a visual guide for positioning and adjusting shelves, saving
considerable time during assembly and adjustment. An
easy-to-identify double groove, every 8" (203mm), offers a quick way
to align all shelves. Bolt leveler on post bottom compensates for
uneven surfaces.
• Fast, Easy Reconfiguration: Super Adjustable Super Erecta can
change as quickly as your needs change. By using various
accessories, hundreds of shelving configurations become possible.
• Choice of Finishes: Super Adjustable
Super Erecta Wire Shelving is available
in a variety of finishes: Super Erecta Brite
and chrome-plated for dry storage,
Metroseal 3™ with antimicrobial product
protection, and stainless steel for corrosive
environments, and a large array of designer
colors (see Catalog Sheet 10.14A).
*MICROBAN and the MICROBAN symbol are registered
trademarks of the Microban Products Company,
Huntersville, NC.
®
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Metroseal 3™ with *Microban® Antimicrobial
Product Protection.
10.01A
Corner Release System
10.01A
042
Job ________________________________________________
®
SUPER ADJUSTABLE SUPER ERECTA SHELF®
WIRE SHELVING
Dimensions
Super Adjustable Super Erecta Wire Shelving
Shelf Width/Length
(in.)
(mm)
18x24
18x30
18x36
18x42
18x48
18x54
18x60
18x72
21x24
21x30
21x36
21x42
21x48
21x54
21x60
21x72
24x24
24x30
24x36
24x42
24x48
24x54
24x60
24x72
Approx. Pkd. Wt.
(lbs.)
(kg)
457x610
457x760
457x914
457x1066
457x1219
457x1370
457x1524
457x1825
530x610
530x760
530x914
530x1066
530x1219
530x1370
530x1524
530x1825
610x610
610x760
610x914
610x1066
610x1219
610x1370
610x1524
610x1825
7
8
91/2
11
12
141/2
17
20
8
9
11
12
14
16
18
24
9
11
13
15
16
18
21
26
3.2
3.6
4.3
5.0
5.4
6.6
7.7
9.1
3.6
4.1
5.0
5.4
6.4
7.3
8.2
10.9
4.1
5.0
5.9
6.8
7.3
8.6
9.5
11.8
Cat. No.
Super Erecta Brite
Cat. No.
Chrome
Cat. No.
Metroseal 3
Cat. No.
Stainless
A1824BR
A1830BR
A1836BR
A1842BR
A1848BR
A1854BR
A1860BR
A1872BR
A2124BR
A2130BR
A2136BR
A2142BR
A2148BR
A2154BR
A2160BR
A2172BR
A2424BR
A2430BR
A2436BR
A2442BR
A2448BR
A2454BR
A2460BR
A2472BR
A1824NC
A1830NC
A1836NC
A1842NC
A1848NC
A1854NC
A1860NC
A1872NC
A2124NC
A2130NC
A2136NC
A2142NC
A2148NC
A2154NC
A2160NC
A2172NC
A2424NC
A2430NC
A2436NC
A2442NC
A2448NC
A2454NC
A2460NC
A2472NC
A1824NK3
A1830NK3
A1836NK3
A1842NK3
A1848NK3
A1854NK3
A1860NK3
A1872NK3
A2124NK3
A2130NK3
A2136NK3
A2142NK3
A2148NK3
A2154NK3
A2160NK3
A2172NK3
A2424NK3
A2430NK3
A2436NK3
A2442NK3
A2448NK3
A2454NK3
A2460NK3
A2472NK3
A1824NS
A1830NS
A1836NS
A1842NS
A1848NS
A1854NS
A1860NS
A1872NS
A2124NS
A2130NS
A2136NS
A2142NS
A2148NS
A2154NS
A2160NS
A2172NS
A2424NS
A2430NS
A2436NS
A2442NS
A2448NS
A2454NS
A2460NS
A2472NS
Adjustable Wire Shelving
SUPER ADJUSTABLE SUPER ERECTA SHELF®
NOTE: For Metroseal 3 shelving information see sheet # 10.10A.
SiteSelect™ Posts
Sleeves/Wedges
Package of 4 per shelf.
Cat. No. A9985
SiteSelect™ Posts are
grooved at 1" (25mm)
increments and numbered
at 2" (50mm) increments.
Posts are double-grooved
every 8" (203mm) for easy
identification. Wedge
Windows™ allow sight of
post number for easy
visual identification.
*MICROBAN® protects the Metroseal 3 coating from
bacteria, mold, mildew and fungi that cause odors, stains
and product degradation.
*MICROBAN and the MICROBAN symbol are registered
trademarks of the Microban Products Company, Huntersville, NC.
Height*
(in.)
(mm)
1
7 /2
141/2
271/2
341/2
549/16
629/16
745/8
865/8
965/8
191
370
700
875
1385
1590
1895
2200
2454
Approx. Pkd. Wt.
(lbs.)
(kg)
1
/2
1
13/4
2
3
31/2
4
5
51/2
0.3
0.5
0.75
0.9
1.4
1.6
1.8
2.3
2.5
Cat. No.
Plated
7P
13P
27P
33P
54P
63P
74P
86P
**96P
Cat. No.
Metroseal 3
Cat. No.
Stainless
13PK3
33PS
27PS
33PS
54PS
63PS
74PS
86PS
33PK3
54PK3
63PK3
74PK3
86PK3
* Height includes leveling bolt and cap.
** 96P should not be used in units less than 24" (610mm) deep.
Consult Metro Engineering for alternate recommendations.
Post lengths to be specified as cut to a round number, ie: 74P cut to 69". . .
This will result in an overall post height with adjustment of 693/8 to 697/8.
Important: When ordering by components remember that for
maximum stability, units should be kept as wide and low as possible.
®
All Metro Catalog Sheets are available on our Web Site: www.metro.com
®
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
L02-006A
Printed in U.S.A. Rev. 1/03
Information and specifications are subject to change
without notice. Please confirm at time of order.
Copyright © 2003 InterMetro Industries Corp.
Pot Sink
Mark #
046
MANUFACTURER Advance/Tabco
MODEL #
K7-CS-21
FEATURES
- (3) lever wastes.
- 12" Add-a-faucet with spray rinse.
- Provide "Z" clip backsplash and seal to wall with clear silicone sealant.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
VOLTS
ROUGH-IN HEIGHT
HP
KW
AMPS
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
1/2", +12"
CW
1/2", +12"
WASTE
(3) IW, 1-1/2", to FS
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
05/01/13
TOWNEPLACE SUITES
MARK# 046
046
STAINLESS STEEL
FABRICATED CONVENIENCE STORE SINKS
Item #:
Qty #:
Model #:
Project #:
Our Solution....to Your Limited Space Problem
In Six Feet or less...
you can WASH, RINSE & SANITIZE
3 Compartment Sink with
2 drainboards Shown
FEATURES:
Tile edge for ease of installation.
3 compartments, 2 drainboards with splash.
stainless steel legs and cross-bracing.
Placement of the welded leg assembly ensures stability and
furnishes direct support of the column load requirement for
the entire sink unit.
Fabricated Bowls are Welde d Together at the Sea ms
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to
a satin finish.
MATERIAL:
Unit is 18 gauge type “304” stainless steel.
Legs are 1 5/8” diameter heavy gauge tubular stainless steel with
stainless steel gussets.
1” adjustable stainless steel bullet feet.
Bowl
Size
10x14
14x16
12x20
Overall
Length
# of
Compart.
MODEL #
58”
70”
70”
64”
3
3
3
3
K7-CS-21
K7-CS-22
K7-CS-29
K7-CS-32
ACCESSORIES
Model #
Qty
FAUCETS
CORNER SINKS ALSO AVAILABLE. PLEASE SEE “KORNER SINKS” SPECIFICATION SHEET
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: [email protected] For Smart Fabrication™ Quotes, Email To: [email protected] or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
D-1
046
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500”
Interior: ± .250”
ALL DIMENSIONS ARE TYPICAL
C
L
8"
O.C.
C
L
8"
C
L
C
L
C
L
Overall Length
Drain
Board
Length
2" Typ.
A
D
C
D
B
3 Compartment Sink with 2 drainboards Shown
MODEL #
BOWL
(SIZE)
Overall
Length
Drainboard
Length
WT**
(lbs)
A
B
X
Y
K7-CS-21
K7-CS-22
10x14
58”
70”
12”
18”
85
100
14”
14”
10”
10”
10” 19 1/2” 10”
10” 19 1/2” 10”
24”
24”
K7-CS-29
14x16
70”
12”
135
16”
14”
11” 21 1/2” 12”
22”
K7-CS-32
12x20
110
20”
12”
13” 25 1/2” 12”
22”
64”
12”
** Approx. Shipping Weights
SECTION
PLUMBING ROUGH-IN
MECHANICAL:
2"
11/2"
CL
2 1/2"
CL
• Faucet holes on 8” centers.
• Faucets are not included
(see accessories).
C
38"
(Faucet)
To
Waste
Line
Y
• Waste drains are 1 1/2” IPS
S/S basket type, located in
center of sink bowl, and are
included.
P Trap
FINISHED FLOOR
D-1a
8"
• Supply is 1/2” IPS hot & cold.
200 Heartland Boulevard, Edgewood, NY 11717-8380
Flood
Level
(X + 2 1/2")
36 1/2"
(Working Height)
X
(Water Level)
3"
42"
1" Adjustable
Stainless Steel
Bullet Feet
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, OCTOBER 2012
Undercounter Freezer
Mark #
048
AMPS
8.3
MANUFACTURER True
MODEL #
TUC-27F
FEATURES
- Verify door hinging.
- Provide with cord and cap.
- Coordinate height with work table, Item 063.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +12"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 048
048
AIA #
Project Name:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
Undercounter:
Model:
TUC-27F
Solid Door Freezer
TUC-27F
True’s undercounter units are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and
components to provide the
user with colder product
temperatures, lower utility
costs, exceptional food safety
and the best value in today’s
food service marketplace.
Oversized, environmentally
friendly (R404A) forced-air
refrigeration system holds
-10°F (-23.3°C). Ideally suited
for both frozen foods and ice
cream.
All stainless steel front, top
and cabinet ends. Matching
aluminum finished back.
Front breathing.
Foamed-in-place, high density
polyurethane insulation (CFC
free).
Heavy duty PVC coated wire
shelves.
Automatic defrost system timeinitiated, time-terminated.
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
Capacity
(Cu. Ft.)
Model
TUC-27F
Doors
1
(liters)
6.5
(mm)
Shelves
2
185
†
*
Counter
Height
(inches)
L
275/8
D†
301/8
H*
293/4
(mm)
36
HP
1/3
Voltage
115/60/1
702
766
756
915
1/3
230-240/50/1
Cord
Length
NEMA (total ft.)
Amps Config. (total m)
8.3
5-15P
7
3.4
APPROVALS:
TM
MADE IN
U.S.A.
R
SINCE 1945
11/05
Printed in U.S.A.
2.13
89
▲ Plug type varies by country.
Depth does not include 1"(26 mm) for rear bumpers.
Height does not include 61/4" (159 mm) for castors and 6" (153 mm) for optional legs.
TRUE REFRIGERATION
▲
Crated
Weight
(lbs.)
(kg)
195
AVAILABLE AT:
Model:
Undercounter:
TUC-27F
Solid Door Freezer
048
STANDARD FEATURES
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, exceptional food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using environmentally
friendly (CFC free) R404A refrigerant.
• Oversized, factory balanced refrigeration
system with guided airflow to provide
uniform product temperatures.
• Extra large evaporator coil balanced
with higher horsepower compressor and
large condenser; maintains -10°F (-23.3°C)
cabinet temperatures. Ideally suited for
both frozen foods and ice cream.
• Sealed, cast iron, self-lubricating
evaporator fan motor and larger fan
blades give True undercounter units a
more efficient low velocity, high volume
airflow design. This unique design insures
faster temperature recovery and shorter
run times in the busiest of food service
environments.
• Condensing unit access in back of cabinet,
slides out for easy maintenance.
• Automatic defrost system time-initiated,
time-terminated.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
• Insulation - entire cabinet structure and
solid door are foamed-in-place using high
density, CFC free, polyurethane insulation.
• 5" (127 mm) diameter stem castors - locks
provided on front set. 36" (915 mm) work
surface height.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
DOOR
• Stainless steel exterior with white
aluminum liner to match cabinet interior.
• Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Positive seal self-closing door with 90°
stay open feature. Door swings within
cabinet dimensions.
• Magnetic door gasket of one piece
construction, removable without tools for
ease of cleaning.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ 21/2" (64 mm) diameter castors.
❒ Basic overshelf.
❒ Single utility shelf.
❒ Double utility shelf.
❒ Stacking collar.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
white polyethylene cutting board.
Requires “L” brackets.
❒ 30" (762 mm) deep, 1/2" (13 mm) thick,
composite cutting board. Requires “L”
brackets.
❒ Heavy duty, 16 gauge tops.
❒ ADA compliant models with 34"(864 mm)
work surface height.
❒ Low profile models with 317/8" (810 mm)
work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes standard
with 404A expansion valve and requires
R404A refrigerant). Consult factory
technical service department for BTU
information.
115/60/1
NEMA-5-15R
SHELVING
• Two (2) adjustable, heavy duty PVC
coated wire shelves 231/4"L x 16"D
(591 mm x 407 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
CABINET CONSTRUCTION
• Exterior - stainless steel front, top and
cabinet ends. Matching aluminum
finished back.
PLAN VIEW
5529/32"
(1421 mm)
2427/32"
279/16"
(701 mm)
301/16"
(764 mm)
(632 mm)
1"
(26 mm)
293/4"
(756 mm)
3515/16"
(913 mm)
25/16"
(59 mm)
125/8"
(321 mm)
ELEVATION
3 7 /8 "
(99 mm)
75/16"
(186 mm)
63/16"
RIGHT VIEW
(158 mm)
WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)
KCL
Model
Elevation
Right
Plan
3D
TUC-27F
TFQY01E
TFQY01S
TFQY01P
TFQY013
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Freezer - Two-Door Reach-In
Mark #
050
AMPS
14.0
MANUFACTURER True
MODEL #
T-49F
FEATURES
- Three (3) extra shelves per section.
- Energy Star rated.
AREA
Back of House
LOCATION
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +86"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 050
TRUE FOOD SERVICE
EQUIPMENT, INC.
050
AIA #
Project Name:
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
T Series:
Model:
T-49F
Reach-In Solid Door Freezer
T-49F
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower utility
costs, superior food safety and the
best value in today’s food service
marketplace.
Extra large evaporator coil
balanced with higher horsepower
compressor and large condenser
maintains -10°F (-23.3°C). Ideally
suited for both frozen foods and
ice cream.
300 series stainless steel solid doors
and front. The very finest stainless
for higher tensile strength for
fewer dents and scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.
Lifetime guaranteed door hinges
and torsion type closure system.
Automatic defrost system timeinitiated, temperature-terminated.
Saves energy consumption and
provides shortest possible defrost
cycle.
Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil for
cleaning.
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
Capacity
(Cu. Ft.)
Model
T-49F
Doors
2
(mm)
Shelves
6
(liters)
49
1388
*
L
541/8
D
291/2
H*
783/8
HP
3/4
Voltage
115/60/1
1375
750
1991
1
230-240/50/1
NEMA
Amps Config.
13.2
5-20P
6.4
APPROVALS:
TM
MADE IN
U.S.A.
R
SINCE 1945
1/06
Printed in U.S.A.
(total m)
(kg)
9
510
2.74
232
▲ Plug type varies by country.
Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
TRUE REFRIGERATION
▲
Crated
Cord
Length Weight
(lbs.)
(total ft.)
AVAILABLE AT:
050
Model:
T Series:
T-49F
Reach-In Solid Door Freezer
STANDARD FEATURES
DESIGN
• True’s solid door reach-in’s are designed
with enduring quality that protects your
long term investment.
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, superior food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using environmentally
friendly (CFC free) R404A refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser maintains -10°F (-23.3°C). Ideally
suited for both frozen foods and ice cream.
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True reach-in’s a superior low
velocity, high volume airflow design. This
unique design insures faster temperature
recovery and shorter run times in the
busiest of food service environments.
• Bottom mounted condensing unit
positioned for easy cleaning. Compressor
runs in coolest and most grease free area
of the kitchen. Allows for storage area on
top of unit.
• Automatic defrost system time-initiated,
temperature-terminated. Saves energy
consumption and provides shortest possible
defrost cycle.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front grill
and shroud. Anodized quality aluminum
exterior ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with 4" (102 mm)
diameter stem castors - locks provided on
front set.
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker switch
mounted above doors.
MODEL FEATURES
• Exterior mounted temperature monitor.
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• Rear airflow guards prevent product from
blocking optimal airflow.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 20 amp dedicated outlet. Cord and
plug set included.
DOORS
• 300 series stainless steel exterior with white
aluminum door liners to match cabinet
interior. Doors extend full width of cabinet
shell. Door locks standard.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Lifetime guaranteed recessed door handles.
Each door fitted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
115/60/1
NEMA-5-20R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ Alternate door hinging (factory installed).
❒ Additional shelves.
❒ Half door bun tray racks. Each holds up
to eleven 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately) (airflow guards
need to be removed).
❒ Full door bun tray racks. Each holds up to
twenty-two 18"L x 26"D (458 mm x 661
mm) sheet pans (sold separately) (airflow
guards need to be removed).
❒ Remote cabinet and/or condensing
unit. System comes standard with 404A
expansion valve and requires R404A
refrigerant.
SHELVING
• Six (6) adjustable, heavy duty PVC coated
wire shelves 249/16"L x 223/8"D
(624 mm x 569 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
PLAN VIEW
541/8"
(1375 mm)
291/2"
(750 mm)
7615/16"
(1955 mm)
835/16"
(2117 mm)
785/16"
(1990 mm)
551/32"
(1398 mm)
2517/32"
(649 mm)
13/8"
(35 mm)
ELEVATION
PLAN VIEW
5"
(127 mm)
WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)
KCL
Model
Elevation
Right
Plan
3D
T-49F
TFEY02E
TFEY02S
TFEY02P
TFEY023
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Refrigerator - Single-Door Reach-In
Mark #
051
AMPS
6.5
MANUFACTURER True
MODEL #
T-23
FEATURES
- Verify door swing.
- Digital thermometer.
- Energy Star rated.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +86"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
01/01/11
TOWNEPLACE SUITES
MARK# 051
051
AIA #
Project Name:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
T Series:
Model:
T-23
Reach-In Solid Door Refrigerator
T-23
True’s solid door reach-in’s are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower
utility costs, superior food safety
and the best value in today’s food
service marketplace.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.
300 series stainless steel solid
door and front. The finest
stainless available; higher tensile
strength for fewer dents and
scratches.
Adjustable, heavy duty PVC
coated shelves.
Positive seal self-closing door.
Lifetime guaranteed door hinges
and torsion type closure system.
Bottom mounted units feature:
“No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil
for cleaning.
ROUGH-IN DATA
Capacity
(Cu. Ft.)
Solid
Doors
1
Model
T-23
(liters)
23
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
# of
Shelves
3
652
(mm)
L
27
D
291/2
H*
783/8
HP
1/3
Voltage
115/60/1
Amps
7.5
NEMA
Config.
5-15P
686
750
1991
1/3
230-240/50/1
4.0
▲
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
TM
2/05
N
USA
APPROVALS:
ERG
S
AV
S
SINCE 1945
5
YEAR
COMPRESSOR
WARRANTY
Y
MADE IN
U.S.A.
E
TRUE REFRIGERATION
®
R
INGS
Printed in U.S.A.
Cord
Length
(total ft.)
Crated
Weight
(lbs.)
(total m)
(kg)
9
260
2.74
118
▲ Plug type varies by country.
051
Model:
T Series:
T-23
Reach-In Solid Door Refrigerator
STANDARD FEATURES
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, superior food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser; maintains 33°F to 38°F (.5°C to
3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motor and larger fan
blades give True reach-in’s a superior low
velocity, high volume airflow design. This
unique design insures faster temperature
recovery and shorter run times in the
busiest of food service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows
for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front,
grill and shroud. Anodized quality
aluminum exterior ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker
switch mounted above door.
• Insulation - entire cabinet structure and
solid door are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Cabinet mounted on a welded, heavy
duty galvanized frame rail. Rail dipped in
rust inhibiting enamel paint for corrosion
protection inside and out.
• Frame rail fitted with 4" (102 mm)
diameter stem castors - locks provided on
front set.
MODEL FEATURES
• Exterior mounted temperature monitor.
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
DOOR
• 300 series stainless steel exterior with
white aluminum door liner to match
cabinet interior. Door extends full width
of cabinet shell. Door lock standard.
• Positive seal self-closing door. Lifetime
guaranteed door hinges and torsion type
closure system.
• Lifetime guaranteed recessed door
handle. Each door fitted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.
• Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ Door hinged on left (factory installed).
❒ Additional shelves.
❒ Half door bun tray rack. Holds up to
eleven 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
❒ Full door bun tray racks. Holds up to
twenty-two 18"L x 26"D (458 mm x 661
mm) sheet pans (sold separately).
❒ Remote cabinets and condensing units,
consult factory technical service dept. for
BTU information.
SHELVING
• Three (3) adjustable, heavy duty PVC
coated wire shelves 227/8"L x 231/4"D
(582mm x 591mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
PLAN VIEW
27"
(686 mm)
291/2"
(750 mm)
785/16"
(1990 mm)
551/32"
(1398 mm)
835/16"
(2117 mm)
2517/32"
(649 mm)
13/8"
(35 mm)
ELEVATION
PLAN VIEW
5"
(127 mm)
WARRANTY
METRIC DIMENSIONS ROUNDED UP TO THE
One year warranty on all parts
NEAREST WHOLE MILLIMETER
& labor and an additional 4 year
SPECIFICATIONS SUBJECT TO CHANGE
warranty on compressor.
WITHOUT NOTICE
(U.S.A. only)
KCL
Model
Elevation
Right
Plan
3D
T-23
TFEY03E
TFEY03S
TFEY03P
TFEY033
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Refrigerator - Two-Door Reach-In
Mark #
052
AMPS
9.0
MANUFACTURER True
MODEL #
T-49
FEATURES
- Digital thermometer.
- Energy Star Rated.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +86"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
01/01/11
TOWNEPLACE SUITES
MARK# 052
TRUE FOOD SERVICE
EQUIPMENT, INC.
052
AIA #
Project Name:
Location:
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
Item #:
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# (636)272-9471
Model #:
SIS #
Qty:
T Series:
Model:
T-49
Reach-In Solid Door Refrigerator
T-49
True’s solid door reach-in’s are
designed with enduring quality
that protects your long term
investment.
Designed using the highest
quality materials and components
to provide the user with colder
product temperatures, lower
utility costs, superior food safety
and the best value in today’s food
service marketplace.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C) for the best in
food preservation.
300 series stainless steel solid
doors and front. The finest
stainless available; higher tensile
strength for fewer dents and
scratches.
Adjustable, heavy duty PVC coated
shelves.
Positive seal self-closing doors.
Lifetime guaranteed door hinges
and torsion type closure system.
Bottom mounted units feature:
”No stoop” lower shelf.
Storage on top of cabinet.
Compressor performs in coolest,
most grease free area of kitchen.
Easily accessible condenser coil for
cleaning.
ROUGH-IN DATA
Model
T-49
Doors
2
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Capacity
(Cu. Ft.)
(liters)
49
Cabinet Dimensions
(inches)
(mm)
Shelves
6
1388
L
541/8
D
291/2
H*
783/8
HP
1/2
Voltage
115/60/1
Amps
9.1
NEMA
Config.
5-15P
1375
750
1991
1/2
230-240/50/1
5.4
▲
* Height does not include 5" (127 mm) for castors or 6" (153 mm) for optional legs.
TRUE REFRIGERATION
APPROVALS:
TM
MADE IN
U.S.A.
R
SINCE 1945
12/05
Printed in U.S.A.
Cord
Length
(total ft.)
Crated
Weight
(lbs.)
(total m)
(kg)
9
420
2.74
191
▲ Plug type varies by country.
AVAILABLE AT:
052
T Series:
Model:
Reach-In Solid Door
Refrigerator
T-49
STANDARD FEATURES
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures, lower
utility costs, superior food safety and
the best value in today’s food service
marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free) 134A
refrigerant.
• Extra large evaporator coil balanced with
higher horsepower compressor and large
condenser maintains 33°F to 38°F (.5°C to
3.3°C) for the best in food preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True reach-in’s a superior low
velocity, high volume airflow design. This
unique design insures faster temperature
recovery and shorter run times in the
busiest of food service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows for
storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel front
grill and shroud. Anodized quality
aluminum exterior ends, back and top.
• Interior - attractive, NSF approved, white
aluminum liner. 300 series stainless floor
with coved corners.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded, heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fitted with 4" (102 mm)
diameter stem castors - locks provided on
front set.
DOORS
• 300 series stainless steel exterior with
white aluminum door liner to match
cabinet interior. Doors extend full width
of cabinet shell. Door locks standard.
• Lifetime guaranteed recessed door
handles. Each door fitted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet metal
interlock to insure permanent attachment.
• Positive seal self-closing doors. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gaskets) of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Six (6) adjustable, heavy duty PVC coated
wire shelves 249/16"L x 223/8"D (624 mm
x 569 mm). Four (4) chrome plated shelf
clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
• Each shelf supports up to 250 lbs. (114 kg).
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker switch
mounted above doors.
MODEL FEATURES
• Exterior mounted temperature monitor.
• Evaporator is epoxy coated to eliminate
the potential of corrosion.
• NSF-7 compliant for open food product.
ELECTRICAL
• Unit completely pre-wired at factory and
ready for final connection to a 115/60/1
phase - 15 amp dedicated outlet. Cord
and plug set included.
115/60/1
NEMA-5-15R
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230-240V / 50 Hz.
❒ 6" (153 mm) standard legs.
❒ 6" (153 mm) seismic/flanged legs.
❒ Alternate door hinging (factory installed).
❒ Additional shelves.
❒ Half door bun tray racks. Each holds up
to eleven 18"L x 26"D (458 mm x 661 mm)
sheet pans (sold separately).
❒ Full door bun tray racks. Each holds up
to twenty-two 18"L x 26"D (458 mm x
661 mm) sheet pans (sold separately).
❒ Remote cabinets (condensing units
supplied by others; system comes standard
with 404A expansion valve and requires
R404A refrigerant). Consult factory
technical service department for BTU
information.
PLAN VIEW
54 1/8"
(1375 mm)
78 5/16"
(1990 mm)
29 1/2"
7615/16"
(750 mm)
(1955 mm)
83 5/16"
55 1/32"
(2117 mm)
(1398 mm)
25 17/32"
(649 mm)
5"
ELEVATION
(127 mm)
WARRANTY
One year warranty on all parts
and labor and an additional 4
year warranty on compressor.
(U.S.A. only)
13/8"
(35 mm)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
RIGHT VIEW
KCL
Model
Elevation
Right
Plan
3D
T-49
TFEY02E
TFEY02S
TFEY02P
TFEY023
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Freezer - Single Door Reach-In
Mark #
053
AMPS
7.9
MANUFACTURER True
MODEL #
T-23F
FEATURES
- Verify door swing.
- Digital thermometer.
- Energy Star rated.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +86"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
01/01/11
TOWNEPLACE SUITES
MARK# 053
053
053
Refrigerator - Compact
Mark #
059
AMPS
4.6
MANUFACTURER True
MODEL #
TUC-27
FEATURES
- Verify door swing.
- Provide with cord and cap.
- Energy Star rated.
AREA
Back of House
LOCATION
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +12"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 059
059
AIA #
Project Name:
Location:
TRUE FOOD SERVICE EQUIPMENT, INC.
Item #:
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366
(636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Qty:
SIS #
Model #:
Standard Depth Undercounter Units
Standard Depth
Undercounter Units
❒ TUC-27, ❒ TUC-36,
❒ TUC-48, ❒ TUC-60,
❒ TUC-72
True’s undercounter refrigeration slides under
work counters for space efficiency or provides
a functional work surface for easy food
preparation.
TUC-48
SPECIFICATIONS / FEATURES
CABINET CONSTRUCTION:
• Stainless steel front, top and ends. Aluminum finished back.
• White, vinyl coated aluminum interior cabinet liner with 300 series
stainless steel floor with coved corners. Construction of liner in
accordance with NSF standards.
• 5” diameter stem castors (optional 6” adjustable stainless steel legs
available).
DOORS:
• Stainless steel exterior with white aluminum interior to match cabinet
liner. Doors extend full width of cabinet shell. Door gaskets of one
piece construction, and removable for ease in cleaning.
• Doors include 12” long horizontal recessed handle with sheetmetal
interlock. Handles foamed-in-place to insure permanent attachment.
INSULATION:
• Entire cabinet structure and doors insulated using foamed-in-place
CFC free polyurethane foam.
REFRIGERATION SYSTEM:
• Refrigeration system factory balanced using CFC free R134A
(refrigerator), R404A (freezer) refrigerant.
• Factory pre-engineered capillary tube system with oversized condenser
and evaporator to reduce product pull down time and to consistently
maintain 33°F to 38°F (refrigerator), -10°F (freezer) interior cabinet
temperature. (non-adjustable capillary tube system superior to
problematic expansion valve)
• Evaporator - epoxy coated at the time of manufacture to eliminate
the potential of corrosion.
ELECTRICAL CHARACTERISTICS:
• Unit completely pre-wired at factory, and ready for final connection
to a 115/60/1 phase - 15 amp dedicated outlet. A cord and plug set
to be included.
• A sole use circuit is required.
SHELVING:
• Adjustable vinyl coated wire shelves (2 per door). Shelves capable
of supporting up to 250 lbs. (not included in drawered models)
115/60/1
NEMA-5-15R
• Full height shelf support pilasters, with double oblong holes on 1/2"
centers. Pilasters made of the same material as cabinet interior.
Four (4) chrome plated, stainless steel shelf clips to be included for
each shelf.
Also available:
• Glass door models
• Drawered models
(hold one 12” x 20” x 6”, full size pan per drawer; not included)
• Freezer models
Remote cabinets available 14% off list
(condensing units supplied by others).
Consult factory technical service dept. for BTU information.
Specifications subject to change without notice.
YEAR
Exceptions:
ERG
E
R
S
R
®
AV
S
COMPRESSOR
2/03
N
5
Y
Printed in
U.S.A.
INGS
APPROVALS:
059
TUC-Series: Standard Depth Undercounter Units
®
455/8"
55"
24 /8"
7
27 /8"
5
30 /8"
1
36 /8"
L - 71 cm
D - 77 cm
H - 91 cm
Door
Swing - 64 cm
301/8"
15 /2"
3
1
L - 93 cm
D - 77 cm
H - 92 cm
Door
Swing - 40 cm
36"
36"
61/4"
61/4"
TUC-36
TUC-27
51 /8"
5
483/8"
211/2"
575/8"
603/8"
301/8"
L - 123 cm
D - 76 cm
H - 92 cm
Door
Swing - 55 cm
271/2"
301/8"
L - 154 cm
D - 77 cm
H - 92 cm
Door
Swing - 70 cm
36"
36"
61/4"
61/4"
TUC-48
TUC-60
521/8"
72 /8"
3
301/8"
22"
L - 184 cm
D - 77 cm
H - 92 cm
Door
Swing - 56 cm
36"
61/4"
TUC-72
Rough-In Data
Model
TUC-27
TUC-36
TUC-48
TUC-60
TUC-72
(1, 2, 3, 4)
(1, 2, 3)
(1, 2, 3)
Dimensions
Capacity # of
(inches)
Doors (Cu. Ft) Shelves
L
D
H
1
6.5
2
27 5/8 30 1/8 36
2
8.5
4
36 3/8 30 1/8 36
2
12.0
4
48 3/8 30 1/8 36
2
15.5
4
60 3/8 30 1/8 36
3
19.0
6
72 3/8 30 1/8 36
HP
1/5
1/3
1/3
1/3
1/2
Volts
115
115
115
115
115
PH
1
1
1
1
1
Amps
4.6
8.3
8.6
7.8
10.5
Cord
NEMA Length
Config. (feet)
5-15
7
5-15
7
5-15
7
5-15
7
5-15
7
Crated
Weight
161
210
243
287
350
Specifications subject to change without notice.
(1) Available in drawered model (3) Available in glass door model
(2) Available in freezer model
(4) Available in glass door freezer
Standard Features ____________________________________________________________________________________________
KCL
Front
TFQY01E
TFP025E
TFQY02E
TFQY03E
TFQZ45E
Right
TFQY01S
TFPY25S
TFQY02S
TFQY03S
TFQZ45S
Plan
TFQY01P
TFPY25P
TFQY02P
TFQY03P
TFQZ45P
3D
TFQY013
TFPY253
TFQY023
TFQY033
TFQZ453
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty.
Optional Accessories ______________
❒
❒
❒
❒
❒
Cutting board
Stacking collar available for TUC-27,-27F.
6” stainless steel or optional seismic legs.
2 1/2” diameter castors available
Low profile models with 2” castor package.
31 1/2” work surface height (available for
TUC-27,-36,-48,-60 refrigerators). ADA
compliant.
❒ Heavy, 16 gauge tops available.
❒ Basic overshelf available for TUC-27,-48,-60.
❒ Service shelf available for TUC-48,-60,-72.
Clearance Required For Coolers (USA)
Sides
Inches/mm
0/0
Rear
Inches/mm
1 / 26
N
5
YEAR
COMPRESSOR
R
ERG
S
R
®
AV
S
TRUE FOOD SERVICE EQUIPMENT
Top
Inches/mm
0/0
Y
Model
TUC-27
TUC-36
TUC-48
TUC-60
TUC-72
• Recessed handles on solid door models;
glass door models feature triple pane
glass and 12” aluminum handles.
• Adjustable vinyl coated wire shelves.
• Epoxy coated evaporator.
• Foamed-in-place high density
polyurethane insulation (CFC free).
• 5” diameter castors standard equipment.
• Door/drawer variations available at full
drawer list pricing.
• Self-contained system.
• Slide out compressor can be serviced easily
and accessed by a single repairman.
E
• Oversized and balanced, environmentally
friendly refrigeration system - holds 33°F
to 38°F (134A, refrigerator), -10°F (R404A,
freezer).
• Stainless steel front, top and sides.
• Interior - NSF approved, white vinyl
coated aluminum sides and top, coved
corners and 300 series stainless steel
floor.
• Aluminum finished back.
• Door swings within cabinet dimensions.
• Work surface 36” high.
• Front breathing.
INGS
St. Charles Industrial Center • P.O. Box 970 • O'Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
Printed in U.S.A.
Table - Prep with Backsplash
Mark #
063
MANUFACTURER Advance/Tabco
MODEL #
TKSS-30___
FEATURES
- Verify length by plan.
- Sound deaden top per General Specifications.
- Provide with "Z"-clip backsplash and seal to wall with clear silicone sealant.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 063
063
STAINLESS STEEL
WORK TABLES
PREMIUM Series - 5” Backsplash - Open Base Style
New
Square Edge
Design
Item #:
Model #:
Project #:
Stainless Steel Legs - Open Base
24”
FEATURES:
Top is furnished with 1 5/8” sanitary rolled rim edge front,
with a 1 5/8” square bend on sides, and a 5” splash with a 1”
return on the rear side.
24” wide tables supplied with TWO hat channels stud welded to
reinforce and maintain a level working surface. 30” and 36”
wide tables supplied with THREE hat channels.
Pre-engineered welded angle adapters insure ease of future
drawer installation.
Front to Back Stretchers bolted to legs and requires assembly.
Left to Right Stretcher is welded to legs.
TKLG-240
TKLG-242
TKLG-243
TKLG-244
TKLG-245
TKLG-246
TKLG-247
TKLG-248
TKLG-249
TKLG-2410
TKLG-2411
TKLG-2412
MATERIAL:
TKSS-SERIES: Stainless Steel Legs - Open Base
TOP: 14 gauge stainless steel type “304” series.
STRETCHERS: 1 5/8” dia. tubular stainless steel.
LEGS: 1 5/8” diameter tubular stainless steel.
Stainless steel gussets.
1” adjustable metal bullet feet.
Qty.
TKSS-363
TKSS-364
TKSS-365
TKSS-366
TKSS-367
TKSS-368
TKSS-369
TKSS-3610
TKSS-3611
TKSS-3612
36”
Qty.
Wide
TKLG-300
TKLG-302
TKLG-303
TKLG-304
TKLG-305
TKLG-306
TKLG-307
TKLG-308
TKLG-309
TKLG-3010
TKLG-3011
TKLG-3012
OPTIONAL
ACCESSORIES
Wide
Qty.
TKLG-363
TKLG-364
TKLG-365
TKLG-366
TKLG-367
TKLG-368
TKLG-369
TKLG-3610
TKLG-3611
TKLG-3612
Model #
Qty
Drawer
Lock
Sink
Casters
Shelving
Duplex Recept.
16 Ga. S/S 304 Legs
TKLG-SERIES: Galvanized Legs - Open Base
TOP: 14 gauge stainless steel type “304” series.
STRETCHERS: 1 5/8” dia. tubular galvanized steel.
LEGS: 1 5/8” diameter tubular galvanized steel.
Galvanized steel gussets.
1” adjustable metal bullet feet.
Fax: (631) 242-6900
30”
Qty.
Wide
All TIG welded. Exposed weld areas polished to match
adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Stud welded hat section reinforces and maintains a
level working surface.
Gussets welded to support hat sections.
NEW YORK
Wide
Galvanized Legs - Open Base
24”
CONSTRUCTION:
(800) 645-3166
36”
Qty.
Wide
TKSS-300
TKSS-302
TKSS-303
TKSS-304
TKSS-305
TKSS-306
TKSS-307
TKSS-308
TKSS-309
TKSS-3010
TKSS-3011
TKSS-3012
TKSS-240
TKSS-242
TKSS-243
TKSS-244
TKSS-245
TKSS-246
TKSS-247
TKSS-248
TKSS-249
TKSS-2410
TKSS-2411
TKSS-2412
1-5/8” LEG STRETCHERS
Ensure Stability
30”
Qty.
Wide
GEORGIA
(800) 832-1218
Fax: (770) 775-5625
TEXAS
(800) 527-0353
Fax: (972) 932-4795
NEVADA
(800) 446-8684
Fax: (775) 972-1578
200 Heartland Boulevard, Edgewood, NY 11717-8380
e-mail: [email protected] www.advancetabco.com
L-11
DETAILS and SPECIFICATIONS
ALL DIMENSIONS ARE TYPICAL TOL ± .500”
063
All Units Shipped Unassembled (KD) for Reduced Shipping Costs.
TKSS & TKLG Series
Open Base Style
5” Backsplash
Units 8ft. and larger are furnished with six (6) legs
TKSS-Series: Stainless Steel Legs & Stretchers
L
30”
24”
36”
48”
60”
72”
84”
96”
108”
120”
132”
144”
24”
Wide
TKSS-240
TKSS-242
TKSS-243
TKSS-244
TKSS-245
TKSS-246
TKSS-247
TKSS-248
TKSS-249
TKSS-2410
TKSS-2411
TKSS-2412
Wt.
49 lbs.
43 lbs.
55 lbs.
67 lbs.
77 lbs.
89 lbs.
107 lbs.
119 lbs.
135 lbs.
234 lbs.
258 lbs.
273 lbs.
30”
Wt.
TKSS-300
TKSS-302
TKSS-303
TKSS-304
TKSS-305
TKSS-306
TKSS-307
TKSS-308
TKSS-309
TKSS-3010
TKSS-3011
TKSS-3012
55 lbs.
48 lbs.
62 lbs.
75 lbs.
89 lbs.
97 lbs.
118 lbs.
131 lbs.
150 lbs.
249 lbs.
276 lbs.
291 lbs.
Wide
36”
Wt.
TKSS-363
TKSS-364
TKSS-365
TKSS-366
TKSS-367
TKSS-368
TKSS-369
TKSS-3610
TKSS-3611
TKSS-3612
80 lbs.
85 lbs.
99 lbs.
112 lbs.
131 lbs.
145 lbs.
165 lbs.
268 lbs.
298 lbs.
313 lbs.
Wide
TKLG-Series: Galvanized Steel Legs & Stretchers
L
30”
24”
36”
48”
60”
72”
84”
96”
108”
120”
132”
144”
L-12
24”
Wide
TKLG-240
TKLG-242
TKLG-243
TKLG-244
TKLG-245
TKLG-246
TKLG-247
TKLG-248
TKLG-249
TKLG-2410
TKLG-2411
TKLG-2412
Wt.
49 lbs.
43 lbs.
55 lbs.
67 lbs.
77 lbs.
89 lbs.
107 lbs.
119 lbs.
135 lbs.
234 lbs.
258 lbs.
273 lbs.
200 Heartland Boulevard, Edgewood, NY 11717-8380
30”
Wide
TKLG-300
TKLG-302
TKLG-303
TKLG-304
TKLG-305
TKLG-306
TKLG-307
TKLG-308
TKLG-309
TKLG-3010
TKLG-3011
TKLG-3012
Wt.
55 lbs.
48 lbs.
62 lbs.
75 lbs.
89 lbs.
97 lbs.
118 lbs.
131 lbs.
150 lbs.
249 lbs.
276 lbs.
291 lbs.
36”
Wide
TKLG-363
TKLG-364
TKLG-365
TKLG-366
TKLG-367
TKLG-368
TKLG-369
TKLG-3610
TKLG-3611
TKLG-3612
Wt.
80 lbs.
85 lbs.
99 lbs.
112 lbs.
131 lbs.
145 lbs.
165 lbs.
268 lbs.
298 lbs.
313 lbs.
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JANUARY 1999
Oatmeal Cooker
Mark #
094
MANUFACTURER APW Wyott
MODEL #
RCW-7SP
FEATURES
- Through program with Quaker Oats.
- Includes ladle.
AREA
Public
LOCATION
Stainless steel
FINISH
ELECTRICAL
CONNECTION
KW
DR
1.2
VOLTS
120
PHASE
1
AMPS
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
6/6/16
TOWNEPLACE SUITES
MARK# 094
094
Classic Countertop Round
Cooker/Warmers
Model:
PRODUCT:
QUANTITY:
RCW-7
RCW-11
ITEM#:
Designed Smart.
• Both models have heating elements that evenly
distribute heat throughout the unit.
• Thermostatically controlled heat can reach
intense temperatures that produce consistant steam
heat (212º).
• Units are designed with high wattage systems that
generate faster start-ups to the required temperatures.
• RCW-7 has 1000 Watts.
• RCW-11 has 1200 Watts.
• Provided with insulation to protect interior parts and
countertops from heat build-up.
• Cooker/Warmers are ideal for thawing frozen soups
and holding the thawed soup at NSF-safe serving
temperatures.
7 Quart
RCW-7 COUNTERTOP ROUND COOKER/WARMER
Built Solid.
Built to Last
• Round Cooker/Warmers are constructed with heavyduty stainless steel for long life.
• Interior liner made of tough stainless steel.
Reliability backed by the Industry’s Best Warranty
• This APW Wyott Warming Equipment is
backed by a 1-year Parts and Labor
warranty, including our “Enhanced
Warranty” service that replaces new
units with certain product issues
through the convenience of direct factory shipments.
• Certified by the following agencies:
C
US
Option:
• Special Packages Includes Inset and Ladle
11 Quart
RCW-11 COUNTERTOP ROUND COOKER/WARMER
APW Wyott Design Features
•
•
•
•
7 qt. (RCW-7) or 11 qt. (RCW-11) capacity.
Stainless steel housing with stainless steel liner.
Thermostatic control.
Raised liner edge (marine lip) prevents outside
condensation.
• Electric low watt density element provides fast, even heat.
• Wet or dry operation.
• Uses standard insets and covers (not included).
s
Rev. 1/1/2003
094
Classic Countertop Round
Cooker/Warmers
Model:
PRODUCT:
QUANTITY:
RCW-7
RCW-11
ITEM#:
PRODUCT SPECIFICATIONS
Construction:
RCW-7
10 1/2" (26.7)
Stainless steel housing and liner, and fiberglass
insulation.
Dimensions:
12 1/2" (31.8)
RCW-11
RCW-7: Diameter 101⁄2” (26.7 cm)
Height 10” (25.4 cm)
RCW-11: Diameter 121⁄2” (31.8 cm)
Height 10” (25.4 cm)
Electrical Information:
10"
(25.4 cm)
Each unit is equipped with a 60”, three wire grounded
power cord which terminates with a standard three
pronged male plug. The 120V unit uses a NEMA 5-15P
plug.
Electrical Specificaions:
RCW-7: 120V, 1000W, 8.3 Amps
RCW-11: 120V, 1200W, 10.0 Amps
Capacity:
RCW-7: 7 qts. (6.6 L)
Holds a standard 7 quart inset.
RCW-11: 11 qts. (10.4 L)
Holds a standard 11 quart inset.
Ship Weight:
(Centimeters in Parenthesis)
RCW-7:
RCW-11:
Standard
10 lbs. (4.54 kg)
12 lbs. (5.45kg)
Special Pkg.*
11 lbs. (5 kg)
13 lbs. (5.9 kg)
*Special package contains inset, hinged cover and ladle.
F.O.B./ Dallas, TX
APW WYOTT “Enhanced Warranty” Program
For equipment covered by APW Wyott’s “Enhanced Warranty”
program–if within one year from the date of purchase, this unit
fails to function, you are entitled to your choice of 1,2 or 3.
1. APW Wyott will replace the unit.
2. You may take this unit to the APW Wyott Authorized Service
Distributor.
3. You can request the Authorized Service Distributor to
service the equipment on site.
24-HOUR SERVICE HOTLINE: 1-800-733-2203
Please see–page 17 of the 2002 APW Wyott Price list
for program details.
Rev. 1/1/2003 #1503
Dry Cereal Display
Mark #
098
MANUFACTURER Rosseto
MODEL #
EZServ-03
FEATURES
- Manufacturer's standard unit.
AREA
Public
LOCATION
Buffet
FINISH
Clear plastic
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
04/01/10
04/01/09
TOWNEPLACE SUITES
MARK# 098
098
EZ-SERV 03
Dry food dispenser
Plexiglas container
Funnel system + top cover (ABS material)
Metal stand
Prestige wooden base
Made from high quality plastic material 5 containers
Capacity: 1.3 Gallon Each.
Dimensions: 27.5" H x 11" W x 16.5" L
Model Number: EZS1029
UPC: 856050001029
ROSSETO™
TEL: 847 763 1215
FAX: 847 763 1218
[email protected]
www.rosseto.com
SKOKIE, IL 60077 USA
Induction Warmers
Mark #
099
MANUFACTURER Spring
MODEL #
SM-651C-T
FEATURES
- Countertop models.
- Provide (1) 2372-6/36 buffet server per warmer.
- Inserts by Operator, NIKEC.
AREA
Public
LOCATION
Buffet
FINISH
Stainless Steel
ELECTRICAL
CONNECTION
KW
DR
650W
VOLTS
120
PHASE
1
AMPS
ROUGH-IN HEIGHT +24"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 099
099
3URMHFWBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
,WHPBBBBBBBBBBBBBBBBBBB4XDQWLW\BBBBBBBBB
0RGHOBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
&RXQWHUWRS3RUWDEOH+ROG2QO\,QGXFWLRQ
:DUPHU:LWK7LWDQLXP&RORUHG6WDLQOHVV%DVH
2UGHU*XLGH
¥
60&79ROW86
0RGHO60&7
0RGHO1XPEHU
9ROWDJH
3HDN3RZHU
60&7
86
:DWWV
3OXJ7\SH
1(0$
6KRUW)RUP6SHFLILFDWLRQ
6SHFLILHGXQLWWREHD6SULQJ86$0$;
,QGXFWLRQŒ60&7&RXQWHUWRS3RUWDEOH
+ROG2QO\,QGXFWLRQ:DUPHUZLWKORZSURILOH
GHVLJQWLWDQLXPFRORUHGVWDLQOHVVVWHHOFDVHPP
WKLFNWHPSHUHGJODVVFRRNWRSDQGLQWHJUDWHG
RYHUVL]HGSDQVXSSRUW8QLWIHDWXUHVRXUH[FOXVLYH
6SULQJ86$6PDUW6FDQŠWHFKQRORJ\ZLWK
RYHUXQGHUYROWDJHSURWHFWLRQSDQVL]HDQGSDQ
W\SHUHFRJQLWLRQODUJHWRXFKVFUHHQSRZHUWHPS
GLVSOD\SOXVDOOWKHIROORZLQJIHDWXUHV
&RQVWUXFWLRQ3HUIRUPDQFH)HDWXUHV
x 7HPSHUHGVOHHNEODFNVPRNHGJODVVIDFHSODWH
x $WWUDFWLYHGXUDEOHHDV\WRFOHDQWLWDQLXP
FRORUHGVWDLQOHVVVWHHOERG\GHVLJQ
x 5HLQIRUFHGWHPSHUHGJODVVYHVVHOVXUIDFH
x )HDWXUHVQRQVNLGQRQVFUDWFKIRRWLQJ
x 6LOLFRQUXEEHUSURWHFWLYHWRSVHDO
x (QHUJ\6DYLQJZDWWVRISRZHUSHUIHFWIRU
SURGXFWKROGLQJ
x )RXU7RXFK&RQWURO7HPSHUDWXUH6HWWLQJV
x /RZ3URILOH'HVLJQ2QO\´7DOO
x ([FOXVLYH6PDUW6FDQŠ3URFHVV&RQWUROOHU
DGMXVWVIRUYROWDJHSDQVL]HDQGSDQW\SH
6LPSOH6ROLG6WDWH&RQWUROV:LWK
x 3RZHU212))7RXFK3DG
x 3RZHU213DQ3UHVHQW,QGLFDWRU/LJKWV
x )RXU6HW+ROG7RXFK3DG7HPSHUDWXUH&RQWUROV
x
x
x
x
x
/RZ
/RZ0HG
0HG+LJK
+LJK
ƒ)
ƒ)
ƒ)
ƒ)
ƒ&
ƒ&
ƒ&
ƒ&
/LJKW8S7HPSHUDWXUH,QGLFDWRU
6PDUW6FDQŠ2YHU8QGHU9ROWDJH3URWHFWLRQ
3DQ2YHUKHDW3URWHFWLRQ
7HPSHUHG%ODFN*ODVV&RQWURO3DQHO2YHUOD\
'XUDEOH6WLFN5HVLVWDQW:KLWIRUG3O\4XDQWDQLXP&RDWLQJ
6WDQGDUG:DUUDQW\
x 2QH<HDU3DUWV/DERU
$JHQF\/LVWLQJV
x )&&
x (7/
x (7/6DQLWDWLRQWR16)
x &(7/
$YDLODEOH$FFHVVRULHV$OWHUQDWH&RQILJXUDWLRQV
x 6WRUDJH7UDQVSRUW%R[>6SULQJ86$&[email protected]
x ,QGXFWLRQ5HDG\&RRNZDUH>6SULQJ86$&[email protected]
x ,QGXFWLRQ5HDG\6HUYLQJ9HVVHOV>6SULQJ86$&[email protected]
x $)8QGHU&RXQWHU$LU)LOWHU6\VWHP>6HH6SHF6,[email protected]
x %XLOW,Q+LJK3RZHU,QGXFWLRQ5DQJHV>6HH6SHF6,[email protected]
x &XVWRP7DEOHWRS,QGXFWLRQ)HDWXULQJ6PDUW6WRQHŒ
x &RXQWHUWRS+ROG2QO\,QGXFWLRQ+RW3ODWH>6SHF6,[email protected]
x 0RELOH&XVWRP&RQILJXUDWLRQV>&[email protected]
$PEDVVDGRU'ULYH6XLWH‡1DSHUYLOOH,/‡3KRQH‡)D[
ZZZVSULQJXVDFRP
$SULO
3URMHFWBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
099
,WHPBBBBBBBBBBBBBBBBBBB4XDQWLW\BBBBBBBBB
0RGHOBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
60&79ROW86
&RXQWHUWRS3RUWDEOH+ROG2QO\,QGXFWLRQ:DUPHU:LWK7LWDQLXP&RORUHG
6WDLQOHVV%DVH
+HLJKW ´
/HQJWK ´
:LGWK ´
>(&@(OHFWULF5HTXLUHPHQWV
0RGHO
9ROWDJH
3KDVH
+HUW]
:DWWV
$PSV
3OXJ
60&7
1(0$3¶&RUG
.H\'LPHQVLRQV6KLSSLQJ,QIRUPDWLRQ
0RGHO
60&7
60&7
8QLW
:LGWK
8QLW
/HQJWK
8QLW
+HLJKW
6KLSSLQJ:HLJKW
´
´
´
OEV
6LQJOH8QLW6KLSSLQJ&DUWRQ
:LGWK
/HQJWK
+HLJKW
´
´
´
7ZR8QLW&DVH3DFN:HLJKW OEVNJ/HQJWK ´PP:LGWK ´PP+HLJKW ´PP
1RWHV&RQGLWLRQV
(QVXUHWKDW\RXKDYHGHGLFDWHGSRZHUZKHUHYHU\RXDUHSODQQLQJWRXVH\RXULQGXFWLRQZDUPHU(DFKZDUPHUGUDZV
$PSV8SWRWKUHHXQLWVFDQRSHUDWHIURPRQHVLQJOH$PSGHGLFDWHGFLUFXLW860RGHOV
)RURSWLPXPSHUIRUPDQFHDOORZ´PPUHDUDQGVLGHFOHDUDQFHIRUJRRGDLUFLUFXODWLRQ<RXULQGXFWLRQ
ZDUPHUPXVWKDYHSURSHUYHQWLODWLRQDWDOOWLPHV'RQRWSODFH\RXULQGXFWLRQXQLWQH[WWRDQ\DSSOLDQFHWKDWWKRZV
KHDWVXFKDVDVWRYHRYHQRUIU\HU$FWXDOUDQJHWHPSHUDWXUHPD\YDU\GXHWRDQXPEHURIYDULDEOHVVXFKDV
DPELHQWWHPSHUDWXUHLQWKHLPPHGLDWHVXUURXQGLQJDUHDFRQWHQWDQGYROXPHRIIRRGEHLQJKHDWHGRUFRRNHGDQG
ZKHWKHURUQRW\RXDUHXVLQJDOLGRQWKHVHUYLQJYHVVHO5HIHUWR\RXU2SHUDWLRQV0DQXDOIRUVWHSVRQKRZWR
SURSHUO\FOHDQDQGPDLQWDLQ\RXULQGXFWLRQZDUPHU
7KLVLQGXFWLRQZDUPHUUHTXLUHVWKHXVHRIIHUURXVPHWDOLQGXFWLRQUHDG\FRRNZDUH
$PEDVVDGRU'ULYH6XLWH‡1DSHUYLOOH,/‡3KRQH‡)D[
ZZZVSULQJXVDFRP
$SULO
11
099
Vi
s
i
o
n
W
NE
Hydraulic Axle
Glass Cover
The Clear Choice in Buffet Servers
Vision Sauteuse, Buffet Server
Without insert, 18/10 stainless steel,. Hydraulic Axle and Glass Cover, with gold- or chrome-plated accents.
CHROME
HEIGHT
7”
15.25”Diameter 1 1⁄4, 2 1⁄2, or 4 qt.
GOLD
7”
15.25”Diameter 1 1⁄4, 2 1⁄2, or 4 qt.
MODEL
ACCENTS
2472-6/36
2472-697/36
DIMENSIONS
CAPACITY
Use insert series 9552, 9554 or 372
CONVERTIBLE BUFFET SYSTEMS
Sauteuse, Buffet Server
Without insert, resistance axle cover, 18/10 stainless steel with gold- or chrome-plated accents.
CHROME
HEIGHT
7”
15.25”Diameter 1 ⁄4, 2 1⁄2, or 4 qt.
GOLD
7”
15.25”Diameter 1 1⁄4, 2 1⁄2, or 4 qt.
MODEL
ACCENTS
2372-6/36
2372-697/36A
DIMENSIONS
CAPACITY
1
Use insert series 9552, 9554 or 372
Conversion stands available. See page 15
www.springusa.com
1-800-535-8974
Hot/Cold Pan
Mark #
100
MANUFACTURER Vida Casa
MODEL #
S1-C30-5S
FEATURES
- Domed cover PETG with door, model 6035739.
- Base tray, model 6017975.
- Cold hard cell, model 6017976.
- Half-size melamine food pan, model 6035636.
- Half-size melamine food pan, model 6035634.
- Brushed stainless steel wrap, model 6034753.
- Available through Wasserstrom Co.
AREA
Public
LOCATION
Buffet
FINISH
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/2/16
TOWNEPLACE SUITES
MARK# 100
Vidacasa - S1 C30-5S
Page 1 of 2
For Hospitality
Buffet Catering
Table Service
For Logistics
Afternoon Tea
BACK
Chiller Solution
Warmer Solution
Food Transport
Share
S1 C30-5S
12" PORCELAIN PLATE
INSULATED PU BASE
CHOOSE PLATE SIZE
L30 W30 H5 cm
REQUEST A QUOTE
PRODUCT DETAILS
S1
SERIES
This C30-5S Buffetware Set works with iThermo F10800 or C1 Cold Cells, which is designed to serve
sushi, fruits and spring rolls at any table without
using ice. Interchangeable with the H1 Pro hot cell,
the C30-5S can instantly become a warmer for
spaghetti & pasta, dumplings and soup. To achieve
optimal temperature results, C30-5S should always
be used with the square lids.
http://www.vidacasa.com/s1/s1-c30-5s.html
Length: 30cm | 12"
Width: 30cm | 12"
Plate Height: 5cm | 2"
Full Height: 12cm | 4.7"
Capacity: 2.4 litres (81.2 oz)
• 6-hour cooling and 3-hour heating
• Cordless hot and cold operations
(F10-800, C1 and H1 Pro)
• Highly insulating material
• The precision engineered flatbottom to get optimized
temperature results
• Modular expandable for any tables
• More flexibility food display
5/14/2015
100
Vidacasa - S1 C30-5S
Page 2 of 2
TEMPERATURE OPTIONS
100
COMPATIBLE REPLACEMENTS
COMPATIBLE ACCESSORIES
Sign up Newsletter
Please enter your email address
Submit
Where to Buy
Products
About
Contact
© 2015 VIDACASA Ltd. All Rights Reserved.
http://www.vidacasa.com/s1/s1-c30-5s.html
5/14/2015
Coffee Airpot Brewer - Royal Cup
Mark #
105
MANUFACTURER Bunn
MODEL #
IBC Tall Single
FEATURES
- Item by Vendor, NIKEC.
- For 125 rooms or fewer.
- Provision to include airpots as needed.
- If operation has more than 125 rooms, verify electrical requirements with Vendor.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
JB
KW
VOLTS
120
PHASE
1
AMPS
14.0
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
1/2", +48"
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
10/01/10
TOWNEPLACE SUITES
MARK# 105
105
Item#
Infusion Series ®
Coffee Brewer - Tall
Project
Date
Features
Infusion Coffee Brewer
• Brews 5.1 to 11.9 gallons (19.3 to 45 litres) of perfect coffee per hour.
• Large 3-gallon (11.36 litre) tank provides back-to-back brewing capacity at 208-240V
applications.
• Dual voltage adaptable. Can operate at 120V/15amp or 208-240V/20amp.
• Three brew buttons allow for 3 separate brewing profiles. Two programmable batch
switches allow full and half batch brewing.
• Includes overlay kits for customization of brewer interface.
• Easy Pulse interface allows automatic programming of pulse routine.
• BrewWISE® intelligence with pre-infusion and pulse brew for maximum flavor
extraction. DBC grinder communicates with brewer through Smart Funnel®.
• Energy-saver mode reduces tank temperature during idle periods.
• Digital display in English/Spanish for easier programming and control. Advertising
messages and machine status also displayed. Display capable of showing English or
Metric measurements.
• Compatible with BUNNlink®.
Model ICB-Tall with 1.5 Gal
ThermoFresh® Server
(TF server sold separately)
Dimensions: 34.4”H x 10.1”W x 20.6”D
(87.4cm H x 25.7cm W x 52.4cm D)
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQHP-10
Product No. : 39000.0004
1.5 gallon ThermoFresh Server
Product No.: 39550.0000
1.5 gallon Digital ThermoFresh Server
Product No.: 39550.0050
Easy Clear® EQHP-10L
Product No. : 39000.0001
1 gallon ThermoFresh Server
Product No.: 39500.0000
1 gallon Digital ThermoFresh Server
Product No.: 39500.0050
Single/Dual Filter Pack
Product No. : 20138.0000
Packed per case: 500
Dimensions:
51⁄4" Base x 41⁄4" Sidewall
13.3 cm Base x 10.8 cm Sidewall
Model
ICB-Tall
Agency Listing
UL
LISTED
Patents Apply
4/09
A3.5b
105
Dimensions & Specifications
Model
Product #
Volts Amps Tank Heater Total Capacity
Watts
Watts
ICB-Tall 36600.0005
120
14
1680
1700
5.1 gal
208
13.8
2900
2900
8.9 gal
240
16.8
3860
4050 11.9 gal
Cubic
Measure
10.1 ft3
Shipping
Cord
Weight Attached
51 lbs Yes*
*Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Electrical: 120 volt model requires 2-wires plus ground service rated 120V, single phase, 60Hz.
An internal terminal block is configured for connection to a 3-wire plus ground.
Plumbing: 20-90 psi (138-621 kPa). Supplied with 3⁄8" male flare fitting. Requires minimum of .8 gpm water flow.
19.90
Bunn-O-Matic® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
4/09 © Bunn-O-Matic Corporation
Microwave Oven
Mark #
111
MANUFACTURER Amana
MODEL #
RCS10TS
FEATURES
- Manufacturer's standard unit.
- If unit set on island table, provide electrical receptacle as floor stub.
AREA
Back of House
LOCATION
FINISH
ELECTRICAL
CONNECTION
SR
KW
VOLTS
120
PHASE
1
AMPS
13.2
ROUGH-IN HEIGHT +60"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 111
111
Project #:
Item #:
Amana Commercial Microwave Model RCS10TS
AIA File #:
Medium Volume
Power Output
z 1000 watts of power.
z Five power levels for consistent, delicious results for frozen,
refrigerated and fresh foods - from the freezer to table
in minutes.
Easy to Use
z Up to 100 programmable menu items simplifies cooking
and ensures consistent results.
z Four stage cooking option for easy one-touch cooking.
Model RCS10TS shown
z Multiple quantity pad calculates the proper cooking
times for multiple portions.
Medium Volume
This category of microwave is ideal for...
Applications:
- Pizza restaurants
- Casual dining
- Clubs
- Deli
z User friendly touch controls are easy to use.
z Time entry option for added flexibility.
z Digital display with countdown timer for simple operation
and “at-a-glance” monitoring.
z Braille touch pads are ADA compliant.
Defrost:
- Defrosts most frozen food products
z See-through door and lighted interior for monitoring without
opening the door.
All ACP, Inc. commercial ovens are backed
by our Culinary Center. Call us with any
question regarding food preparation,
menu development and cooking times.
866-426-2621.
z 1.2 cubic ft. (34 liter) capacity accommodates a 14” (356 mm)
z Stackable to save valuable counter space.
Easy to Maintain
z Stainless steel exterior and interior for easy cleaning and
a professional look.
z Non-removable air filter protects oven components.
z Constructed to withstand the foodservice environment.
z Backed by the ACP, Inc. 24/7 ComServ Support Center,
866-426-2621.
z ETL Listed.
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A.
®/ ™ © 2012 Amana. All rights reserved. Brand used under license.
|
800-233-2366
|
319-368-8120
|
Fax: 319-368-8198
|
www.acpsolutions.com
Specification #:
platter, prepackaged foods and single servings.
Amana Commercial Microwave Model RCS10TS | Medium Volume
22”
(559)
32-3/4”
(832)
1”
(25)
111
4”
(102)
13-7/8”
(352)
1-1/2”
(38)
21”
(533)
17-1/4”
(438)
19”
(483)
Drawings available from KCL CADlog - [email protected]
AIA File #:
Specification #:
Installation clearance: 2” all sides
Specifications
Model
Configuration
Control System
Programmable Control
Settings Programmable
Max. Cooking Time
Power Levels
Defrost
Time Entry Option
Microwave Distribution
Magnetron(s)
Display
Stackable
Stage Cooking
Interior Light
Door Handle
Signal
Air Filter
RCS10TS
UPC Code 728028020724
Countertop
Touch
10
100
60:00
5
Yes
Yes
Rotating antenna, top
1
VFD
Yes
Yes, 4
Yes
Grab & Go
End of cycle, adjustable
Non-removable with cleaning reminder
Multiple Portion Setting
Yes, X2
Exterior Dimensions
H 13 7⁄8” (352)
Cavity Dimensions
Door Depth
Usable Cavity Space
Exterior Finish
Interior Finish
Power Consumption
Power Output**
Power Source
W 14 ⁄2” (368) D 15” (381)
H 8 ⁄2” (216)
32 3/4” (832), 90o+ door open
1.2 cubic ft. (34 liter)
Stainless steel
Stainless steel
1550 W, 13 A
1000 W** Microwave
120V, 60 Hz, 15 A single phase
Plug Configuration / Cord
NEMA 5-15
Frequency
Product Weight
Ship weight (approx.)
Shipping Carton Size
UPS Shippable
2450 MHz
41 lbs. (18.6 kg.)
48 lbs. (21.8 kg.)
H 17 1⁄4” (431) W 25 1⁄2” (660) D 20 1⁄2” (508)
Yes
W 22” (559)
1
Specifications
Commercial microwave 10 touch pad control panel shall be
programmable with the ability to program up to 100 menu
items with two multiple portions. Touch pad shall include
Braille for ADA compliance. Cooking timer shall be 60 minute,
countdown style with a time entry option and an adjustable
end of cycle audible signal. There shall be 5 power levels, including defrost and 4 cooking stages. Microwave output shall
be 1000 watts distributed by one magnetron with a rotating
top antenna to provide superior even heating throughout the
cavity. Durable door shall have a tempered glass window and
a grab and go handle with a 90o+ opening for easy access. An
interior light shall facilitate monitoring without opening the
door. The large 1.2 cubic ft. (34 liter) cavity shall accommodate
a 14” (356 mm) platter. Interior ceramic shelf shall be sealed
and recessed on oven bottom to reduce plate-to-shelf edge
impact. Oven shall have a stainless steel interior and exterior
and be stackable to save counter and shelf space. Front air
filter shall be permanently affixed to the front of the oven
and have a clean filter reminder. Microwave oven shall comply with standards set by the U.S Department of Health and
Human Services, UL923 for safety and NSF4 for sanitation.
D*19” (483)
1
5 ft. (1.5m)
Warranty
Warranty Certificate for this product can be found on the ACP,
Inc. website at:
www.acpsolutions.com/warranty
Service
All products are backed by the ACP, Inc. 24/7 ComServ
Support Center.
Measurements in ( ) are millimeters
* Includes handle
** IEC 60705 Tested
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A.
Form # ACRR0968
|
800-233-2366
ACP commitment to quality may mean a change in specification without notice.
|
319-368-8120
Product of the U.S.A.
|
Fax: 319-368-8198
© 2012 ACP Inc.™
|
www.acpsolutions.com
Printed in the U.S.A.
Microwave Shelf
Mark #
112
MANUFACTURER Advance/Tabco
MODEL #
MS-24-24
FEATURES
- Mount at +4'-6" AFF.
- Advise G.C. to provide wall blocking to support 50 lbs./LF.
AREA
Back of House
LOCATION
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 112
112
STAINLESS STEEL
MICROWAVE
SHELVES
A Convenient Place for your
MICROWAVE!
Item #:
Qty #:
Model #:
WALL
MOUNTED
MS Series
Project #:
Wall Mounted
Width
Model #
Weight
18”
MS-18-24
15 lbs.
24”
MS-24-24
20 lbs.
FEATURES:
Mounted on tubular supports and fastened to the top with expanding
tubular connectors.
CONSTRUCTION:
FOR TABLE MOUNTED MICROWAVE SHELVES:
Use PT Shelves found on SECTION O-3 and add
TA-102 for Microwave 24” x 24” extension.
Specify Right or Left.
Model #
OPTIONAL
Table mounted
microwave shlef
All TIG welded.
Exposed surfaces polished to a satin finish.
MATERIAL:
18 gauge stainless steel.
Qty
Galvanized steel reinforced hat section.
TA-102
DETAILS and SPECIFICATIONS
TOL ± .500”
ALL DIMENSIONS ARE TYPICAL
WALL MOUNTED
www.advancetabco.com
NEW YORK
GEORGIA
TEXAS
NEVADA
(800) 645-3166
(800) 832-1218
(800) 527-0353
(800) 446-8684
Fax: (631) 242-6900
Fax: (770) 775-5625
Fax: (972) 932-4795
Fax: (775) 972-1578
For Assistance with
Smart Modifications & Accessories Call:
SMART ENGINEERING RESPONSE TEAM
1-800-498-6634 Fax: 631-586-2933 [email protected]
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, AUGUST 2003
O-18
Waffle Irons
Mark #
114
MANUFACTURER Heartland Foods
MODEL #
Generic
FEATURES
- Call 913/831-4446.
- Open height 22".
- Verify with franchisee if they are on General Foods Marriott Program.
- Item by Operator (Marriott owned properties), NIKEC.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
Back of House
ELECTRICAL
CONNECTION
SR
KW
VOLTS
120
PHASE
1
AMPS
12.5 ea.
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 114
114
Turn mild-mannered guests
into waffle fanatics.
Guests love freshly baked waffles!
Hot, delicious waffles are ready in just two minutes. A premium
breakfast option compared to cold cereals and muffins, waffles generate
higher guest satisfaction scores — and more repeat customers.
You’ll love the savings!
Save 37¢ per guest per day when you add self-serve waffles to your breakfast bar.
The pioneer in self-serve waffles.
114
Self-serve Waffle Program
F O R H O T E L S , R E S TAU R A N T S , I N S T I T U T I O N S
Self-serve Waffle Program
Upgraded chrome-plated accessories retain
appearance through a lifetime of demanding service.
Self-serve display holds 15 pre-measured batter
cups for easy use by customers. See-through
sneeze guard.
Self-serve Display:
Width: 12 1/2"
Depth: 15 3/4"
Height: 8 1/2"
Little Bulldog Waffle Baker
Two-minute continuous bake time (even during peak
breakfast periods). Space-saving design (smallest
footprint in the industry). Computer-controlled temperature
and bake time. Teflon® coated baking grids.
Dimensions
Width: 10"
Depth: 14 1/2"
Height: 8"
Open: 20"
Weight: 18 lb.
Power requirements:
120 Volts AC
1500 watts – 12.5 amps
Mixing and Baking Accessories
Award-winning Waffle Mixes
Add-water mixes available in 2 lb. and 5 lb. sizes
to reduce discards. Add-water mixes have 20%
greater yield (certified independent research
study). Lowest portion cost in the industry.
Mix Flavors and Pack Sizes
Description
Pack
Yield
SKU
Malted Vanilla*
Complete
6/5 lb.
15/2 lb.
195
195
1001
1006
Malted Vanilla
Add butter
6/5 lb.
12/2.5 lb.
216
216
1004
1009
Malted Vanilla
Add eggs & butter
8/3.75 lb.
280
1008
6/5 lb.
195
See below
Banana (SKU #5002), Apple Cinnamon (SKU #5003),
Blueberry (SKU #5004), Brownie (SKU #5005)
Sweet Cream
Buttermilk Pancake
6/5lb.
195
Batter takes just minutes to prepare –
and only two items to clean up.
Add water to fill line
indicated on mixing pitcher,
add one pre-measured
package of waffle
mix, blend with
wire whisk,
and fill 12
portion cups.
Simple!
Outstanding Customer Service
Heartland’s network of independent distributors
has a stake in providing the absolute best
customer service in the industry.
Give us a call. We’ll set you up tomorrow!
2001
*Ingredients: Wheat flour, cornmeal, vegetable oil, sugar, whole
egg, leavening, soy flour, malt, nonfat milk, salt, artificial flavor.
913-831-4446
www.heartlandfoodproducts.com
Teflon and DuPont are trademarks of E. I. duPont de Nemours and Company.
Microwave Shelf
Mark #
112
MANUFACTURER Advance/Tabco
MODEL #
MS-24-24
FEATURES
- Mount at +4'-6" AFF.
- Advise G.C. to provide wall blocking to support 50 lbs./LF.
AREA
Back of House
LOCATION
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 112
Microwave Oven
Mark #
144
AMPS
15.0
MANUFACTURER Amana
MODEL #
RCS10TS
FEATURES
- Brushed stainless steel finish.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 144
Microwave Oven
Mark #
639
AMPS
13.2
MANUFACTURER Amana
MODEL #
RCS10TS
FEATURES
- Pre-programmed and labeled buttons for Marriott.
- Locate where shown on plan.
- Coordinate surrounding millwork for proper air circulation.
AREA
Public
LOCATION
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +38"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 639
Toaster
Mark #
117
MANUFACTURER Star/Holman
MODEL #
QCS1-350
FEATURES
- For 120V 1.6 KW.
- With cord and cap.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
SR
1.6
VOLTS
120
1
AMPS
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PHASE
Mount receptacles in millwork for servery units
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 117
117
Holman Cooking Equipment
QCS Conveyor Toaster
QCS1 SERIES
COMPACT CONVEYOR TOASTER
QCS Features/Benefits:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Patented forced convection system keeps the toaster cool to the touch
and extends the life of critical components. The forced convection system
increases productivity by re-circulating pre-heated air into toasting chamber.
Quartz infrared heaters provide faster, more consistent heating than
traditional heating elements.
Compact - requires only 14-¼" of counter space and our patented forced
convection system allows the unit to be placed against a wall. Other
toasters have louvers requiring additional counter space.
Highest production of any compact toaster QCS1-350 toasts up to 350 slices per hour
QCS1-500B toast up to 500 bagel halves per hour
Eas y to use control panel takes the guesswork out of speed control
settings.
Variable speed control for perfect color and texture of bread, bagels, English
muffins and more!
Energy efficient operation with power saver switch that reduces electricity
consumption by 75%. And our quartz heaters return to full power in seconds
vs. minutes for metal-sheathed elements.
Extended conveyor belt for easy loading and large warming area for higher
production.
Safe load up area with full width front burn guard and cool to the touch
exterior.
"Smart" crumb tray keeps the bread crumbs from falling under the toaster.
Heated holding area to keep toast at the perfect temperature.
Hi-limit switch prevents toaster from overheating protecting critical
component parts.
24 hours 7 days a week technical support by Holman technicians.
120V - plugs in anywhere.
QCS1-350
Applications:
Holman's QCS compact conveyor toaster has been designed and engineered
for the budget minded small volume operation. The QCS toaster is compact
and versatile requiring minimal counter space and delivers perfect toast, bagels,
buns, English muffins, frozen waffles and more for about the price of a pop up
toaster.
Quality Construction:
Holman designs every toaster to stand up to the most rigorous foodservice
demands. Stainless steel construction for long lasting durability. Heavy-duty
motor, drive chain and conveyor speed control for superior reliability. Conveyor
belt tension system for smooth and quiet operation. High performance Quartz
Infrared Heaters for superior toasting performance and reliability. Units are easy
to disassemble with one-piece cover for cleaning and service. Toasters are
furnished with 1" adjustable legs and 4’ cord and a standard NEMA 5-15 plug
for plug in installation in a grounded 120V outlet.
QCS1-500B
Warranty:
Holman's conveyor toasters are covered by a one-year parts and labor
warranty.
Holman Cooking Equipment - 90 Industrial Park Road - P.O. Box 880 - Saco, ME 04072
Phone: (800) 225-3958 - FAX: (207) 282-6283 - www.star-mfg.com
Holman is a subsidiary of
Star Manufacturing In’t, Inc.
H215/0112
117
Holman Cooking Equipment
QCS Conveyor Toasters
QCS1- 350 & QCS1-500B
COMPACT CONVEYOR TOASTER
QCS-1
Performance Data
Model No.
QCS1-350
Production Capacities
350 slices per hour
Product Opening
1-1/2”
QCS1-500B
500 bagel halves per hour
1-1/2”
Specifications
Model No.
Width
Inches
(cm)
Dimensions
Depth
Inches
(cm)
Height
Inches
(cm)
Shipping
Weight
lbs.
(kg)
QCS1-350
14-1/4”
18-7/8”
13-1/4”
(36.2)
(47.9)
(33.6)
(96.8)
(45.1)
(41.9)
(55.9)
QCS1-500B
14-1/4”
18-7/8”
13-1/4”
44
17-3/4”
16-1/2”
22”
(36.2)
(47.9)
(33.6)
(96.8)
(45.1)
(41.9)
(55.9)
44
Width
Inches
(cm)
Shipping Carton
Depth
Inches
(cm)
17-3/4”
16-1/2”
Height
Inches
(cm)
22”
Electrical Data
Model No.
Volts
HZ 1 Phase
Amps
Watts
QCS1-350
120
220
120
220
60
50
60
50
13.8
7.8
12.2
6.9
1600
1600
1400
1400
QCS1-500B
Heating Elements
Above Belt
Below Belt
2
2
2
2
2
2
0
0
NEMA
5-15P
(5-20P Canada)
Not Supplied with cord and plug
5-15P
Not Supplied with cord and plug
Typical Specifications
Compact conveyor toasters are constructed of corrosion resistant stainless steel. Supplied with heavy-duty motor, drive chain
and fast heat up quartz infrared heaters. A conveyor belt tension system is supplied for a smooth, quiet operation. Units are
supplied with variable speed control, power saver and high limit switch. Extended conveyor belt, crumb tray, heated holding
area and full width burn guard are standard. Unit has a one-piece cover for easy access with 1" adjustable legs and a 4' cord.
Units are listed with UL, CUL and are UL certified to NSF4. Printed in the U.S.A.
Holman Cooking Equipment - 90 Industrial Park Road - P.O. Box 880 - Saco, ME 04072
Phone: (800) 225-3958 - FAX: (207) 282-6283 - www.holmancooking.com
Juice Chillers
Mark #
118
AMPS
4.5
MANUFACTURER Bunn
MODEL #
JDF-2S
FEATURES
- Item by Vendor; NIKEC.
- Field convert drip tray for indirect waste to floor drain.
- Procure through Avendra/Citrus World, 1-800-835-0506.
AREA
Public
LOCATION
Buffet
Back of House
FINISH
ELECTRICAL
CONNECTION
DR
KW
120
VOLTS
1
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PHASE
15 amp cct.
PLUMBING
HW
CW
1/2", +12"
WASTE
IW, 1", to FFD
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
05/01/13
TOWNEPLACE SUITES
MARK# 118
118
ITEM#
Silver Series ® 2-Flavor
Cold Beverage System
PROJECT
DATE
Features
JDF-2S
Cold Beverage System
Cold beverage dispenser with High Intensity® mixing delivers superior
drinks consistently glass after glass
s !COSTEFFECTIVESOLUTIONTOPROVIDINGYOURCUSTOMERSWITHSUPERIOR
PERFORMANCEINJUICEANDOTHERCONCENTRATEDBEVERAGEDISPENSING
s /NEDISPENSERDELIVERSBOTHFROZENANDAMBIENTPRODUCTSINCREASINGPROlTS
BYLOWERINGCOSTS
s $RINKCONSISTENCYASSUREDWITHTHE"5..(IGH)NTENSITY®MIXINGTECHNOLOGY
s 0UMPSANDMIXESTOCONCENTRATEDBEVERAGESINCLUDINGHIGH
VISCOSITYANDJUICESACCURATELYANDCONSISTENTLY
s 1UICKDISPENSEWITHTOOUNCESTOMLPERSECOND
mOWRATE
s vCUPCLEARANCEACCOMMODATESMOSTJUICECONTAINERS
s LBKGICEBANKPROVIDESSUPERIORCOLDDRINKCAPACITY
s !DVANCEDCONCENTRATEPUMPDESIGNEDFOREASYSETUPACCURACY
ANDDURABILITY
s -ODULARDISPENSEDECKMAKESSERVICEFASTANDSIMPLE
s "OTHPUSHBUTTONANDSINGLESIZEPORTIONCONTROLINTHESAMEMACHINE
s !VAILABLEWITH)CED#OFFEEOR*UICEDISPLAY
s 0REVENTIVEMAINTENANCEKIT
»
(available with juice or iced coffee display)
$IMENSIONSv(Xv7Xv$
CM(XCM7XCM$
For current specification sheets and other information, go to www.bunn.com.
Related Products
Easy Clear® EQHP-10
0RODUCT.O
Easy Clear® EQHP-10CRTG
0RODUCT.O
Extended Drip Tray (JDF-2S)
0RODUCT.O
increases cup clearance to 10.25”
(grill not included, use existing
grill or order 26801.0000 below)
Ambient Conversion Kit
0RODUCT.O
(one kit required per dispense
station - photo shows
4-dispense station unit with
one container and three
ambient conversion kits)
Refillable Juice Container
#APACITY'ALLON
0RODUCT.O
Replacement Grill fits Standard and
Extended Drip Trays (JDF-2S)
0RODUCT.O
Model
Agency Listing
*$&3
5/12
D6.1
118
Dimensions & Specifications
Model
Product #
Volts
Amps
Capacity
Cubic
Measure
Shipping
Weight
Cord
Attached
*$&3
OZDRINKSMIN
FT
LBS
9ES†
*$&3
OZDRINKSMIN
FT
LBS
9ES†
OZDRINKSMIN
FT
LBS
9ES†
(iced coffee display)
*$&3
(dual dispense - allows simultaneous dispense from both dispense heads, juice display)
Models include air filter.
Refillable Juice Container Product No.: 39302.0000 Capacity: 1 Gallon (sold separately)
* 75˚F (24˚C) incoming water for 180 drinks without exceeding 41˚F (5˚C) finished drink temperature.
†
Power cord (NEMA 5-15P) 15 Amp-120V machine only.
%LECTRICAL
-ODELREQUIRESWIREGROUNDEDSERVICERATED6SINGLEPHASE(Z
0LUMBING
PSIK0A-ACHINESUPPLIEDWITH⁄CMMALElTTING
2EFRIGERATION2AREFRIGERANTOZKGLBKGICEBANKSYSTEM
"UNN/-ATIC®#ORPORATION3TEVENSON$RIVE3PRINGlELD)LLINOISsss&AXsWWWBUNNCOM
"5..®PRACTICESCONTINUOUSPRODUCTRESEARCHANDIMPROVEMENT7ERESERVETHERIGHTTOCHANGESPECIlCATIONSANDPRODUCTDESIGNWITHOUTNOTICE3UCH
REVISIONSDONOTENTITLETHEBUYERTOCORRESPONDINGCHANGESIMPROVEMENTSADDITIONSORREPLACEMENTSFORPREVIOUSLYPURCHASEDEQUIPMENT
5/12 © Bunn-O-Matic Corporation
!LLDIMENSIONSSHOWNININCHES
Garbage Cans
Mark #
119
MANUFACTURER By Others
MODEL #
Generic
FEATURES
- Item by Operator, NIKEC.
- Recommended unit for buffet - Rubbermaid 3541 Slim Jim waste container or
equivalent.
- Recommended unit for kitchen - Rubbermaid 2632 Brute container or equivalent.
AREA
Public
Back of House
LOCATION
Buffet
Kitchen
FINISH
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
04/01/09
TOWNEPLACE SUITES
MARK# 119
119
®
Slim Jim Container
Combine efficiency and ease of handling with the
23 gallon Rubbermaid Slim Jim® Container, now
available with optional handles. Positioned high on
the container, the large handles are easy to grasp
and help give improved leverage and control for
lifting and emptying. For smaller volume requirements
or where full container lifting weight is a concern,
choose the 15.9 gallon Slim Jim® Container.
Interchangeable, color-coded Recycling Tops fit
both container sizes and help encourage effective
waste separation. An innovative linking trolley
system can be used to transport multiple Slim Jim®
containers in one trip or individually as a dolly.
Color-coded tops encourage effective separation of
recyclable waste: blue top with slot for paper, green
and brown tops with holes for bottles and cans, gray
and yellow tops for general refuse.
2688-88
Make your operation productive and efficient with
the Slim Jim® Containers,Tops and Trolley System –
the strongest link in your waste separation program!
2692-88
2703-88
Large handles positioned
high on the Slim Jim ®
container give leverage
and control.
Containers come in two
capacities for versatility
to fit your needs.
FPO
Durable, lightweight plastic
construction provides long
life without the weight,
sharp edges and rusting
common with some metal
containers.
3554
3554
Linking trolleys detach
easily by pushing front
toeplate.
3554
Slim Jim® Container
Item No.
Description
Dimensions
Capacity
Polyliner Bags
Color
Pack
3540
Slim Jim® Container
Slim Jim® Container with Handles
3554
Slim Jim® Container with Handles
23 U.S. gal.
(87.1 L)
15 7/8 U.S. gal.
(60 L)
23 U.S. gal.
(87.1 L)
5009-88, 5074,
5084
5009-88, 5074,
5084
5009-88, 5074,
5084
2673
Slim Jim® Untouchable® Top
fits 3540, 3541, 3554 Containers
Slim Jim® Handle Top fits
3540, 3541, 3554 Containers
Slim Jim® Bottle & Can
Recycling Top fits 3540,
3541, 3554 Containers
Slim Jim® Paper Recycling
Top fits 3540, 3541, 3554 Containers
Slim Jim® Trolley accommodates
3540, 3541, 3554 Containers
Light Gray, Dark Blue,
Brown, Beige
Light Gray, Dark Blue,
Beige
Light Gray, Dark Blue,
Brown, Beige
Dark Blue, Brown,
Light Gray
Light Gray, Yellow
4
3541
20" l x 11" w x 30" h
(50.8 cm x 27.9 cm x 76.2 cm)
23 1/8" l x 11" w x 24 7/8" h
(58.7 cm x 27.9 cm x 63.2 cm)
20" l x 11" w x 30" h
(50.8 cm x 27.9 cm x 76.2 cm)
20 3/8" l x 11 3/8" w x 4 3/4" h
(51.8 cm x 28.9 cm x 12.1 cm)
20 3/8" l x 11 5/16" w x 2 3/4" h
(51.8 cm x 28.7 cm x 7 cm)
20 3/8" l x 11 5/16" w x 2 3/4" h
(51.8 cm x 28.7 cm x 7 cm)
2688-88
2692-88
2703-88
3551
Products manufactured under a quality management
system registered to ISO 9002.
www.rubbermaid.com/rcp
©2000 Rubbermaid Commercial Products LLC
Winchester, VA 22601
Printed in U.S.A. 2/00-50M Litho SM-548
4
4
4
4
Brown, Green
4
20 3/8" l x 11 5/16" w x 2 3/4" h
(51.8 cm x 28.7 cm x 7 cm)
23 7/16" l x 15" w x 10 13/16" h
(59.5 cm x 38.1 cm x 27.5 cm)
Dark Blue
4
Gray
2
119
Durable, heavy-duty containers for a variety of uses.
All-plastic, professional-grade construction will not rust, chip or peel; resists dents.
Strong, snap-on lids are available for secure, stable stacking.
Reinforced rims add strength and durability.
Built-in handles allow easy, non-slip lifting and anti-jam nesting.
Double-ribbed base increases stability and dragging capacity.
Gray, White and Yellow are USDA Meat & Poultry Equipment Group Listed and assist in complying
with HACCP guidelines.
Certified to NSF Standard #2 (gray, white and yellow) and Standard #21(all colors)
Custom imprinting available; contact Rubbermaid Customer Service at (800) 347-9800 for details.
2637-88 is California State Fire Marshal (CSFM) approved for fire safety when used with 2632.
2632 BRUTE® Container without Lid
SPECIFICATIONS
U.S.
Metric
Diameter:
22 in
55.9 cm
Height:
27 1/4 in
69.2 cm
Volume Capacity [Nom]:
32 gal
121.1 L
Carton Cube:
18.67 ft3
0.53 m3
Ship Weight/Carton:
49.45 lb
22.43 kg
Volume Capacity [Max]:
Volume Capacity [Min]:
Carton Height:
Carton Length:
Carton Width:
Mass Capacity [Nom]:
Mass Capacity [Max]:
Pack Quantity:
6
Cartons Per Pallet:
4
119
AVAILABLE COLORS
Order #
Color
Product UPC/
UCC Code
FG263200 YEL
YEL
086876014150 /
10086876014157
FG263200 WHT
WHT
086876014136 /
10086876014133
FG263200 RED
RED
086876014112 /
10086876014119
FG263200 GRAY
GRAY
086876014679 /
10086876014676
FG263200DGRN
DGRN
086876179026 /
10086876179023
FG263200 BLUE
BLUE
086876047493 /
10086876047490
Yellow
YEL
White
WHT
Red
RED
Gray
GRAY
Dark Green
DGRN
Blue
BLUE
HOME OFFICE
Rubbermaid Commercial Products LLC
3124 Valley Avenue
Winchester, VA 22601
U.S.A.
Phone: 540.667.8700
Fax: 540.542.8770
Hand Lavatory
Mark #
126
MANUFACTURER Advance/Tabco
MODEL #
7-PS-80
FEATURES
- Wall-hung handsink with integral soap and towel dispenser.
- Left and right side SS splash guards.
- Deck-mount faucet with wrist-blade faucet handles.
- 2-1/2" positive drain with basket.
- K-170 eyewash unit.
NOTE: Eyewash unit to be added to hand sink in all renovation projects.
AREA
Back of House
LOCATION
Kitchen
FINISH
Stainless steel
ELECTRICAL
CONNECTION
VOLTS
ROUGH-IN HEIGHT
HP
KW
AMPS
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
1/2", +24"
CW
1/2", +24"
WASTE
DW, 2" to 3" tight waste,
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
05/01/13 04/01/09
TOWNEPLACE SUITES
MARK# 126
126
STAINLESS STEEL
HAND SINKS
TRADITIONAL
Item #:
Model #:
Keyhole Bracket for
easier installation
and greater stability.
Project #:
Model #
Qty
7-PS-50
7-PS-60
7-PS-70
7-PS-80
7-PS-85
7-PS-50
FEATURES:
One piece Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum dimension
of 2” and are rectangular in design for increased capacity.
CONSTRUCTION:
7-PS-60
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin
finish.
Die formed Countertop Edge with a 3/8” No-Drip offset.
One sheet of stainless steel is used. There are no welded seams
other than corners.
MECHANICAL:
7-PS-85
Faucet supply is 1/2” IPS male thread hot and cold.
K-59 splash mounted 4” O.C. gooseneck faucet chrome plated
furnished with aerator.
K-6 stainless steel basket drain 1-1/2” IPS.
K-26 lever operated drain and built-in overflow with plastic
overflow tube and spring clamps.
7-PS-14 P-Trap is 1 1/2” chrome plated.
7-PS-12 Soap Dispenser.
Towel dispenser with hinged towel box. Unit uses standard
C-fold towels.
7-PS-70
Sink bowl is 10” x 14” x 5”.
MATERIAL:
Heavy gauge type 304 series stainless steel.
Wall mounting bracket is Galvanized and of offset design.
All fittings are brass / nickel plated unless otherwise indicated.
7-PS-80
NEW YORK
GEORGIA
TEXAS
NEVADA
(800) 645-3166
(800) 832-1218
(800) 527-0353
(800) 446-8684
Fax: (631) 242-6900
Fax: (770) 775-5625
Fax: (972) 932-4795
Fax: (775) 972-1578
200 Heartland Boulevard, Edgewood, NY 11717-8380
e-mail: [email protected] www.advancetabco.com
A-1
126
DETAILS and SPECIFICATIONS
7-PS-50
7-PS-60
7-PS-70
7-PS-80
Towel Dispenser
Soap Dispenser
Faucet
25 1"
2
4"
8"
2"
C 1
L "
2
5"
C
L
85"
8
CL
85"
8
7-PS-85
TOP VIEW
Faucet
20 21 "
4"
3 21 "
C
L 8"
2"
5"
Basket Drain
Skirt
85
8"
C
L
SUGGESTED PLUMBING
TOP VIEW
WITH TOWEL DISPENSER
85
8"
P-Trap
C
L
17 41 "
SKIRT
INSTALLATION
14"
15 41 "
10"
TOL ± .500”
ALL DIMENSIONS ARE TYPICAL
A-2
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JANUARY 2003
126
DECK MOUNTED
FAUCETS
Lavatory Faucet
Drinking Bubbler
K-22
K-50
K-48
K-47
12” Swing Spout
3 1/2” Gooseneck
8” Swing Spout
Single
Handle
Faucet
8 1/2” Gooseneck
Water
Filler
Large
Spout
Gooseneck with
Wrist Handles
K-56
K-54
K-55
Extra
Heavy
Duty
Gooseneck
HEAVY DUTY
Pre-Rinse
Faucet (T&S)
K-58
LEAD FREE
COMPIANT
K-62
K-114
Replacement Spray
Head & Handle
Heavy Duty
5-1/2”
Gooseneck
Heavy Duty
9” Swing
Spout
K-132
K-133
K-53
K-52
Swing Spout
with Spray
Wrist
Handles
Only
K-320-LU
6” Extended Spout
K-124
AC/DC powered
Hands-Free
Gooseneck
AC & Battery
Operated!
Metered Faucet
K-180
K-190
K-115
Eye Wash Attachment
K-170
Hands-Free Wand
6” Extended Spout
with Wrist Handles
K-208
K-400
Repair Kit For K-22, K-50,
K-52 & K-59
For Lead Free Compliant Faucets, add -CA
after model number (Example: K-50-CA)
K-03
Repair Kit can only be used on
faucets purchased after 12/03
Customer Service Available To Assist You
1-800-645-3166
8:30 am - 8:00 pm E.S.T.
Email Orders To: [email protected] For Smart Fabrication™ Quotes, Email To: [email protected] or Fax To: 631-586-2933
www.advancetabco.com
NEW YORK
Fax: (631) 242-6900
GEORGIA
Fax: (770) 775-5625
TEXAS
Fax: (972) 932-4795
NEVADA
Fax: (775) 972-1578
G-1
TOL ± .125”
DIMENSIONS and SPECIFICATIONS
ALL DIMENSIONS ARE TYPICAL
Swing Spout Faucet
4” O.C.
Gooseneck Faucet
4” O.C.
Swing Spout Faucet
8” O.C.
Standard Faucet conforms to NSF 61 Standard 9. An optional
faucet upgrade is required for compliance to AB 1953 Standards.
K-170 - Eye Wash Detail
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
ALL FAUCET AERATORS
CONFORM TO
ASTM.A112.18.1M
2.0 GPM/7.56 LPM
THREAD: 55/64 - 27 FEMALE
K-22 THREAD: 15/16 - 27 MALE
MODEL #
Description
K-03
K-22
K-47
K-48
K-50
K-52
K-53
K-54
K-55
K-56
K-58
K-62
K-115
K-124
K-132
K-133
K-170
K-180
Repair Kit For K-50, K-52 and K-59
Lavatory Faucet
Drinking Bubbler
Single Handle Faucet
8” Swing Spout Faucet
3 1/2” Gooseneck Faucet
12” Swing Spout Faucet
Water Filler Faucet
8 1/2” Gooseneck Faucet
Gooseneck Faucet with Wrist Handles
Swing Spout Faucet with Spray (Requires 4 holes)
Extra Heavy Duty Gooseneck Faucet
Heavy Duty Pre-Rinse (T&S) Faucet
6” Extended Spout Faucet
Heavy Duty 5-1/2” Gooseneck Faucet
Heavy Duty 9” Swing Spout Faucet
Eye Wash Attachment (See Above Detail)
Hands Free AC/DC Operated Faucet
K-190
K-208
K-400
Metered Faucet
6” Extended Spout Faucet With Wrist Handles
Hands Free Wand
A
B
C
LENGTH
HEIGHT
DECK TO SPOUT
N/A
3 1/2”
4 1/16”
8 1/2”
8”
3 1/2”
12”
2 1/2”
8 1/2”
3 1/2”
8”
3 1/2”
15”
6”
5 1/2”
9”
N/A
4 3/8”
N/A
3”
5 3/4”
15 3/4”
4 3/4”
8”
5 1/2”
9 1/2”
14 1/4”
8”
3 1/2”
11 7/8”
40”
6”
10 11/16”
8 13/16”
N/A
10 1/4”
N/A
2”
3”
10”
2”
5”
3 1/2”
8”
8 1/2”
5”
2 3/16”
9 1/4”
9”
3 1/4”
5 5/8”
6 1/4”
N/A
6 3/4”
N/A
4” O.C.
Single Hole
Single Hole
4” O.C.
4” O.C.
4” O.C.
Single Hole
4” O.C.
4” O.C.
8” O.C.
4” O.C.
Single Hole
4” O.C.
8” O.C.
8” O.C.
N/A
Single Hole
2 3/4”
6”
N/A
5 1/2”
6”
N/A
2”
3 1/4”
N/A
Single Hole
4” O.C.
N/A
On Center
Dimensions
6' Cord. INPUT: 100-240VAC 47-6Hz. < 1 Amp Draw. UL LISTED
N/A = Not Applicable To Faucet
G-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, NOVEMBER 2012
Bread Display
Mark #
140
MANUFACTURER Generic
MODEL #
Generic
FEATURES
- Item by Operator; NIKEC.
AREA
Public
LOCATION
Buffet
FINISH
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 140
Counter Refrigerator
Mark #
143
AMPS
1.5
MANUFACTURER Liebherr
MODEL #
BCDv-1003-MAR
FEATURES
- Countertop merchandiser.
- Verify hinge with plan.
- LED side lighting.
- Adjustable thermostat.
- Silver exterior finish, white interior.
- (3) shelves.
- Factory-installed security lock.
AREA
Public
LOCATION
Buffet
FINISH
Stainless Steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT Vfy.
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 143
143
BCDv-1003-MAR
BCDv-1002-MAR
Technical Specifications
Gross Capacity
Dimensions Inches
32.9"x19.5"x 20.7"
Depth Interior Compartment
14.17"
Height Interior Compartment
16.92"
Net Height Interior Compartment
22.24"
Energy Consumption in 24H (KWH)
1.3
Cooling System
Dynamic
Temperature Range F
35 to 59F
Housing Material
Steel
Color
Silver
Glass Door
Glazed
Interior Tub
Plastic White
Temp Control
Manual
Total Shelves
3
Adjustable Shelves
3
Load Capacity Shelves
Door Handle
88 Lbs
Recessed
Door Lock
Yes
Self Closing Door
Yes
Door Hinges
Interchangeable
Gross Weight
39 Lbs
Net Weight
81 Lbs
Refrigerant
134 A
Voltage - Hertz
Zakatas Design 10-19-20011
3.2 Cubic Feet
115V - 60Hz
Microwave Oven
Mark #
144
AMPS
15.0
MANUFACTURER Amana
MODEL #
RCS10TS
FEATURES
- Brushed stainless steel finish.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15 04/01/09
TOWNEPLACE SUITES
MARK# 144
144
Project #:
Item #:
Amana Commercial Microwave Model RCS10TS
AIA File #:
Medium Volume
Power Output
l 1000 watts of power.
l Five power levels for consistent, delicious results for frozen,
refrigerated and fresh foods - from the freezer to table
in minutes.
Easy to Use
l Up to 100 programmable menu items simplifies cooking
and ensures consistent results.
Model RCS10TS shown
l Four stage cooking option for easy one-touch cooking.
l Multiple quantity pad calculates the proper cooking
times for multiple portions.
Medium Volume
This category of microwave is ideal for...
Applications:
- Pizza restaurants
- Casual dining
-Clubs
-Deli
l User friendly touch controls are easy to use.
l Time entry option for added flexibility.
l Digital display with countdown timer for simple operation
and “at-a-glance” monitoring.
l Braille touch pads are ADA compliant.
Defrost:
- Defrosts most frozen food products
l See-through door and lighted interior for monitoring without
opening the door.
l 1.2 cubic ft. (34 liter) capacity accommodates a 14” (356 mm)
platter, prepackaged foods and single servings.
l Stackable to save valuable counter space.
Easy to Maintain
l Stainless steel exterior and interior for easy cleaning and
a professional look.
l Non-removable air filter protects oven components.
l Constructed to withstand the foodservice environment.
l Backed by the ACP, Inc. 24/7 ComServ Support Center,
866-426-2621.
l ETL Listed.
Part No. 20154711
Updated 8/8/14
Original Instructions
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A.
®/ ™ © 2012 Amana. All rights reserved. Brand used under license.
© 2014 ACP, Inc.
Cedar Rapids, Iowa 52404
|
800-233-2366
|
319-368-8120
|
Fax: 319-368-8198
|
www.acpsolutions.com
Specification #:
All ACP, Inc. commercial ovens are backed
by our Culinary Center. Call us with any
question regarding food preparation,
menu development and cooking times.
866-426-2621.
Amana Commercial Microwave Model RCS10TS | Medium Volume
22”
(559)
32-3/4”
(832)
1”
(25)
4”
(102)
13-7/8”
(352)
1-1/2”
(38)
21”
(533)
17-1/4”
(438)
19”
(483)
Drawings available from KCL CADlog - [email protected]
AIA File #:
Specification #:
Installation clearance: 2” all sides
Specifications
Model
Configuration
Control System
Programmable Control
Settings Programmable
Braille
Max. Cooking Time
Power Levels
Defrost
Time Entry Option
Microwave Distribution
Magnetron(s)
Display
Stackable
Stage Cooking
Interior Light
Door Handle
Signal
Air Filter
RCS10TS
Countertop
Touch
10
100
UPC Code 728028020724
60:00
5
Yes
Yes
Rotating antenna, top
1
VFD
Yes
Yes, 4
Yes
Grab & Go
End of cycle, adjustable
Non-removable with cleaning reminder
Multiple Portion Setting
Yes, X2
Exterior Dimensions
H 13 7⁄8” (352)
Cavity Dimensions
Door Depth
Usable Cavity Space
Exterior Finish
Interior Finish
Power Consumption
Power Output**
Power Source
W 14 ⁄2” (368) D 15” (381)
H 8 ⁄2” (216)
32 3/4” (832), 90o+ door open
1.2 cubic ft. (34 liter)
Stainless steel
Stainless steel
1550 W, 13 A
1000 W** Microwave
120V, 60 Hz, 15 A single phase
W 22” (559)
1
Specifications
Commercial microwave 10 touch pad control panel shall be
programmable with the ability to program up to 100 menu
items with two multiple portions. Touch pad shall include
Braille for ADA compliance. Cooking timer shall be 60 minute,
countdown style with a time entry option and an adjustable
end of cycle audible signal. There shall be 5 power levels, including defrost and 4 cooking stages. Microwave output shall
be 1000 watts distributed by one magnetron with a rotating
top antenna to provide superior even heating throughout the
cavity. Durable door shall have a tempered glass window and
a grab and go handle with a 90o+ opening for easy access. An
interior light shall facilitate monitoring without opening the
door. The large 1.2 cubic ft. (34 liter) cavity shall accommodate
a 14” (356 mm) platter. Interior ceramic shelf shall be sealed
and recessed on oven bottom to reduce plate-to-shelf edge
impact. Oven shall have a stainless steel interior and exterior
and be stackable to save counter and shelf space. Front air
filter shall be permanently affixed to the front of the oven
and have a clean filter reminder. Microwave oven shall comply with standards set by the U.S Department of Health and
Human Services, UL923 for safety and NSF4 for sanitation.
D*19” (483)
1
Plug Configuration / Cord
NEMA 5-15
Frequency
Product Weight
Ship weight (approx.)
Shipping Carton Size
UPS Shippable
2450 MHz
41 lbs. (19 kg.)
47 lbs. (21 kg.)
H 17” (431)
W 26” (660)
Yes
5 ft. (1.5m)
Warranty
Warranty Certifican be found on
at:
cate for this product
the ACP, Inc. website
www.acpsolutions.com/warranty
Service
All products are backed by the ACP, Inc. 24/7 ComServ
Support Center.
D 20” (508)
Measurements in ( ) are millimeters
* Includes handle
** IEC 60705 Tested
Part No. 20154711
Updated 1/21/15
Original Instructions
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A.
© 2014 ACP, Inc.
Cedar Rapids, Iowa 52404
|
800-233-2366
|
319-368-8120
|
Fax: 319-368-8198
|
www.acpsolutions.com
144
Pop-Up Toaster
Mark #
148
AMPS
15.0
MANUFACTURER Waring Commercial
MODEL #
WCT800RC
FEATURES
- Manufacturer's standard unit.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +48"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
01/01/11
TOWNEPLACE SUITES
MARK# 148
148
Toasters: WCT800
Uniformly toasts regular bread, Texas bread, frozen waffles and many
other foods
Four 1-1/8" regular toast slots
Easily replaceable industrial heating plates
120 volt - 300 slices per hour
Electronic Browning Controls and Carriage Control Lift Levers
Dishwasher-safe Crumb Tray
Limited One Year Warranty
ETL, NSF
Catalog#
WCT800
Description
Heavy Duty Commercial Toasters
314 Ella T. Grasso Ave.
Torrington, CT 06790
1-800-4WARING
(1-800-492-7464)
Std.
Pkg.
Cu.
Ft.
Shp. Wt.
1
1.6
22 lbs
Buffet - Counter
Mark #
151
MANUFACTURER By Others
MODEL #
Architectural Woodwork
FEATURES
- Coordinate Shop Drawings and finishes with KEC.
AREA
Public
LOCATION
Buffet
FINISH
Millwork
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
9/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 151
Buffet - Waste Chute
Mark #
155
MANUFACTURER Component Hardware Group
MODEL #
J92-1000
FEATURES
- Install in buffet counter as shown on plan.
AREA
Public
LOCATION
Buffet
FINISH
Stainless steel
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
04/01/09
TOWNEPLACE SUITES
MARK# 155
155
Ice Dispenser
Mark #
551
AMPS
1.0/20.0
MANUFACTURER Manitowoc
MODEL #
SY-0504A/SPA-310
FEATURES
- Air cooled ice maker.
- Approximately 500 lbs. of ice production / 24 hrs.
- Mount on SPA-310 cube dispenser.
- Standard pushbutton operation.
- Energy Star rated.
AREA
Public
LOCATION
Vending
FINISH
Stainless steel
ELECTRICAL
CONNECTION
DR/DR
KW
VOLTS
120/120
1/1
ROUGH-IN HEIGHT +12"/+60"
HP
ROUGH-IN COMMENTS
PHASE
Dispenser/Ice Maker
PLUMBING
HW
CW
1/2",+12"
WASTE
(2) IW, 1" to FFD
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
10/01/10
04/01/09
TOWNEPLACE SUITES
MARK# 551
551
S-Series 500
Ice Cube Machine
SY-0504A Ice Machine
on B-570 Bin
ANITATION
We've made it
simple to clean
AVINGS
The perfect balance of
power and efficiency
OUND
Designed to run
whisper-quiet
ERVICEABILITY
Easy access means
less downtime
• Up to 560 lbs. (254 kgs.)
daily ice production
• CEE Tier 3 energy and water
efficiency rating
• Only 30" (76.20 cm) wide
• Removable water distribution
tube with no tools
• Food zone designed with
soft, round, cove corners
• Patented cleaning and
sanitizing technology
• Select components made
with AlphaSan® antimicrobial
• Hinged front door for easy access
• Warranty
5-year parts and 5-year labor
coverage on ice machine evaporator
5-year parts and 3-year labor
coverage on ice machine compressor
3-year parts-and-labor coverage
on all other ice machine, dispenser,
and storage bin components
America's #1 Selling Ice Machine
Ice Cube & Flake Machines • Ice Storage Bins • Ice Dispensers
551
Manitowoc S-Series 500
kgs.
lbs.
kgs.
dice
530
240
420
420
5.5
Tier 3
SD-0503W
dice
550
249
470
470
4.3
Tier 3
SY-0504A
half-dice
560
254
440
200
5.4
Tier 3
SY-0505W
half-dice
550
249
485
220
4.3
Tier 3
REMOTE AIR-COOLED WITH JC-0495 CONDENSER
SD-0592N
dice
510
231
425
204
5.8
SY-0594N
half-dice
480
218
450
193
6.1
Tier 3
Tier 3
#
#
#
#
Water usage/100 lbs./45.4 kgs. of Ice
Potable Water: 18 gallons, 68 liters • Water-cooled Condenser: 138 gallons, 522 liters
Order ice storage bin separately. “A” or “W” following model number indicates “Air” or “Water” condensing unit. Ice storage
bin and JC-0495A remote condenser must be ordered separately. Consult remote condenser specification sheet for details.
*Consortium for Energy Efficiency (CEE) is a North American nonprofit organization that promotes
energy-efficient products, technologies and services; also the principal entity for the development of
ice maker efficiency standards.
Certified in Accordance with ARI Automatic Commercial Ice-Cube Machines
(Batch-Type) Certification Program, which is based on ARI Standard 810
Ice Machine Electric
115/60/1 standard. (208-230/60/1 and 230/50/1 also available.)
Min. circuit ampacity: Air-cooled: 20 amps
Water-cooled: 13.5 amps
Remote:
20 amps
Max. fuse size: Air-cooled, Water-cooled: 20 amps
Remote: 25 amps
HACR-type circuit breakers can be used in place of fuses.
air temp
water temp
air temp
50˚
10˚
560
254
510
231
460
209
70˚
21˚
510
231
470
213
440
200
90˚
32˚
465
211
425
193
390
177
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
50˚
10˚
530
240
485
220
440
200
70˚
21˚
485
220
445
202
420
191
90˚
32˚
445
202
405
184
370
168
70˚
21˚
80˚
27˚
90˚
32˚
550
249
540
245
530
240
500
227
485
220
485
220
440
200
435
197
425
193
70˚
21˚
80˚
27˚
90˚
32˚
550
249
540
245
530
240
500
227
485
220
470
213
440
200
430
195
425
193
70˚
21˚
80˚
27˚
90˚
32˚
510
231
490
222
475
215
465
211
450
204
450
204
425
193
410
186
400
181
70˚
21˚
80˚
27˚
90˚
32˚
480
218
465
211
455
206
445
202
435
197
425
193
415
188
400
181
390
177
†Production for Dice and Half Dice cubes. Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice.
S-500
B-400
59.50"
151.13 cm
30.00"
76.20 cm
34.00"
86.30 cm
290 lbs.
131.54 kgs.
Space-Saving Designs
Height
Width
Bin
Storage
FRONT
Height includes adjustable bin legs 6.00" to 8.00", (15.24 to 20.32 cm) set at 6.00" (15.24 cm). For comparison purposes
multiply ARI capacity by 1.3 (30%) to arrive at approximate “Application Rating Capacity.” *K-00214 bin adapter required.
FILTER
Air-cooled
S-500 on B-570
Storage Bin
AuCS®SI Accessory
Automatic Cleaning
System purchased
factory installed in
the machine or as an
option for field retrofit.
21.50"
(54.61 cm)
A Electrical Entrance (2) Options
B 3/8" (0.95 cm) F.P.T. Water Condenser Inlet
(water-cooled units)
C 1/2" (1.27 cm) F.P.T. Water Condenser Outlet
(water-cooled units)
A
D 1/2" (1.27 cm) Auxillary Base Drain Socket
B
E 3/8" (0.95 cm) F.P.T. Ice Making Water Inlet
F 1/2" (1.27 cm) F.P.T. Ice Making Water Drain
G 3/4" (1.91 cm) Bin Drain
C
D
2 Cube Sizes Available
F
Half Dice
E
3
⁄8" x 11⁄8" x 7⁄8"
(.95 x 2.86 x 2.22 cm)
44.00"
(111.76 cm)
Dice
7
⁄8" x 7⁄8" x 7⁄8"
(2.22 x 2.22 x 2.22 cm)
G
We are committed to protecting the
environment and its resources. For
up-to-date product data always view
an electronic version on our web site.
ISO 9001: 2000
Quality System Certified
Installation Note Minimum installation clearance:
Top/sides: 8" (20.32 cm), back: 5" (12.70 cm).
MANITOWOC ICE
2110 South 26th Street, P.O. Box 1720
Manitowoc, WI 54221-1720, USA
Ph: 920-682-0161 • Fax: 920-683-7589
Visit us online at www.manitowocice.com
©2009 Manitowoc 2/09 Continuing product improvement may necessitate change of specifications without notice.
• Ambient Temperature Range:
Air and water-cooled:
35˚ to 110˚F (1.6˚ to 43.3˚C)
Remote: -20˚ to 120˚F (-29˚ to 49˚C)
• Water Temperature Range:
35˚ to 90˚F (1.6˚ to 32.2˚C)
• Water Pressure Ice Maker
Water In:
Min. 20 psi (137.9 kPA)
Max. 80 psi (551.1 kPA)
• Condenser Inlet Water In:
(Water cooled only)
Min. 20 psi (137.9 kPA)
Max. 150 psi (1,034.2 kPA)
Air Flow Top View
S-500
B-570
71.50"
181.61 cm
30.00"
76.20 cm
34.00"
86.30 cm
430 lbs.
195.04 kgs.
2830E
BTU Per Hour:
6,100 (average) 6,900 (peak)
Compressor:
Nominal rating: 3/4 HP
Cupra-Nickel Condenser:
(Water-cooled models)
Adds protection from
corrosive water elements.
Operating Limits:
water temp
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
Depth
Specifications
lbs. kgs.
24-HOUR PRODUCTION†
HALF-DICE CUBE
DICE CUBE
ENERGY
STAR*
AIR-COOLED
lbs.
SD-0502A
CEE*
Rating
WATER-COOLED
Model
Power
kWh/100 lbs.
@ 90°/70°F
REMOTE
Ice Production 24 Hours
70°Air/50°F Water 90°Air/70°F Water
Ice
Shape
551
SPA-310 • SFA-291
Ice Dispensers
SPA Model
SFA Model
• Designed for ice
bucket filling in
hotels, motels,
and resorts
• Ice only
dispense, with
coin-op and
room card
dispensing
control options
• Designed for
"large" container
ice filling. Accepts
up to 10.5" (26.67
cm) high container
• Built-in water valve
S-Series 450 Ice Machine
SPA-310 Ice Dispenser
• 180 lbs. (82 kgs.) ice storage capacity.
Accepts 22" (55.88 cm) or 30" (76.2 cm)
wide Manitowoc ice machine
• Only 30" (76.2 cm) wide, 32" (81.28 cm)
deep, and 82" high (208.28 cm)
• Patented rocking chute dispense
mechanism reduces in-flight ice and
ice spillage with quick on/off activation
• Efficient built-in agitator assures 100%
dispensing. Oversized drain pan collects
larger quantity of ice overflow
S-Series 450 Ice Machine
SFA-291 Ice & Water Dispenser
• Warranty
5-year parts and 5-year labor
coverage on ice machine evaporator
5-year parts and 3-year labor
coverage on ice machine compressor
3-year parts-and-labor coverage
on all other ice machine and
dispenser components
ISO 9001:2000
Quality System Certified
America's #1 Selling Ice Machine
Ice Cube & Flake Machines • Ice Storage Bins • Ice Dispensers
551
Manitowoc SPA-310 • SFA-291 Ice Dispensers
SERIES 300 (115V)
lbs. kgs.
24-HOUR PRODUCTION †
AIR-COOLED UNIT
W AT E R - C O O L E D U N I T
water temp
air temp
70˚
21˚
295
134
275
125
255
116
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
50˚
10˚
325
147
305
138
285
129
90˚
32˚
270
122
250
113
235
107
24.50" (62.23 cm)
water temp
50˚
10˚
310
143
305
138
295
134
70˚
21˚
285
129
280
137
270
122
90˚
32˚
260
118
255
116
250
113
†Production for Dice and Half Dice cubes. Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice.
SERIES 450 (115V)
21.50"
(54.60 cm)
S-450
or S-600
Ice Machines
A
B
lbs. kgs.
24-HOUR PRODUCTION †
AIR-COOLED UNIT
W AT E R - C O O L E D U N I T
air temp
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
water temp
air temp
70˚
21˚
420
191
400
181
380
173
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
50˚
10˚
450
204
430
195
410
186
90˚
32˚
390
177
370
168
350
159
C
water temp
50˚
10˚
470
213
460
209
450
204
70˚
21˚
440
200
430
195
420
191
90˚
32˚
400
181
390
177
380
172
EF
E
D
54.50"
(138.43 cm)
SPA-310
or SFA-291
Ice Dispenser
H
†Production for Dice and Half Dice cubes. Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice.
SERIES 600 (208-230V)
AIR-COOLED
UNIT
air
temp
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
water
temp
50˚
10˚
650
295
640
290
590
268
70˚
21˚
600
272
580
263
540
245
F
lbs. kgs.
24-HOUR PRODUCTION †
W AT E R - C O O L E D
REMOTE
UNIT
AIR-COOLED UNIT
air
temp
90˚
32˚
560
254
550
249
510
231
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
water
temp
50˚
10˚
650
295
640
290
630
286
70˚
21˚
630
286
620
281
610
277
air
temp
90˚
˚F
32˚
˚C
590 -20˚ to 70˚
268 -29˚ to 21˚
580
90˚
263
32˚
580
100˚
263
38˚
6.00"
(15.24 cm)
G
water
temp
50˚
10˚
630
286
620
281
580
263
70˚
21˚
580
263
570
259
530
240
90˚
32˚
550
249
530
240
500
227
30.00"
(76.20 cm)
32.00" (81.30 cm)
A Electrical Entrance (2) Options
B 3/8" (0.95 cm) F.P.T. Water Condenser
Inlet (water-cooled units)
C 1/2" (1.27 cm) F.P.T. Water Condenser
Outlet (water-cooled units)
†Production for Dice and Half Dice cubes. Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice.
D 3/8" (0.95 cm) F.P.T. Ice Making Water Inlet
E 1/2" (1.27 cm) F.P.T. Ice Making Water Drain
F Dispenser Electrical Entrance
G 1/2" (1.27 cm) F.P.T. Melting Tray Pan Drain
H Water Inlet: SFA-291 only
Certified In Accordance With ARI Ice Storage Bins Certification Program,
which is based on ARI Standard 820
Note: Dispenser will accept single 22" or 30" wide ice machine.
Ice machine ordered separately. Choose Dice or Half Dice cube size.
Refer to ice machine specification sheet for electrical and complete ARI
standard ratings.
Dispenser Electric: 115/60/1. (208-230/60/1 and 230/50/1
also available.)
Maximum Circuit Fuse Size: 15.0 amps. HACR-type circuit breakers
can be used in place of fuses.
Dispenser Electrical Connection: 6' power cord, rated 125 VAC, 16-3
conductors with standard 3-prong, straight-blade, ground-type plug (NEMA
configuration 5-15P).
Motor: 1.6 amps maximum. Permanently lubricated.
Service Access: Dispenser door removes easily to access components.
Model Options: SPA-310 push for ice rocking chute, SCA-330 coin-op
and SRA-340 room card control available. To field-convert SPA-310
to SRA-340, call factory for information. SFA-291 has a water valve option.
Installation Note - Dispensers have no minimum clearance, when installing an ice
machine/dispenser combination follow the clearance requirements for the ice machine
being installed.
AuCS®SI Accessory
Options for SPA-310
Automatic Cleaning
System purchased
factory installed in
the machine or as an
option for field retrofit.
2 Cube Sizes Available
Room Card
SRA-340
Half Dice
3
1
7
⁄8" x 1 ⁄8" x ⁄8"
(.95 x 2.86 x 2.22 cm)
Coin-Op
SCA-330
25-cent
coin standard.
Dice
7
⁄8" x 7⁄8" x 7⁄8"
(2.22 x 2.22 x 2.22 cm)
We are committed to protecting the
environment and its resources. For
up-to-date product data always view
an electronic version on our web site.
MANITOWOC ICE
2110 South 26th Street, P.O. Box 1720
Manitowoc, WI 54221-1720, USA
Ph: 920-682-0161 • Fax: 920-683-7589
Visit us online at www.manitowocice.com
©2008 Manitowoc 9/08 Continuing product improvement may necessitate change of specifications without notice.
˚F
˚C
70˚
21˚
80˚
27˚
90˚
32˚
4359
air temp
Vending / Soda Machine
Mark #
552
AMPS
15 CCT
MANUFACTURER By Others
MODEL #
Generic
FEATURES
- Item by Vendor.
- Contracted locally by Owner.
AREA
Public
LOCATION
Vending
FINISH
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
ROUGH-IN HEIGHT +24"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
3/31/06
04/01/09
TOWNEPLACE SUITES
MARK# 552
IN A PINCH
Dry Millwork Case
Mark #
611
MANUFACTURER By Others
MODEL #
Architectural Millwork
FEATURES
- Item by G.C.; NIKEC.
AREA
Public
LOCATION
In a Pinch
FINISH
Millwork
ELECTRICAL
CONNECTION
KW
VOLTS
AMPS
PHASE
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/28/07
04/01/09
TOWNEPLACE SUITES
MARK# 611
Refrigerator - Glass Door
Mark #
628
MANUFACTURER True
MODEL #
GDM-19T-LD-MAR
FEATURES
- For all operations with beer and wine service only, new and renovation.
- Verify door swing.
- Black exterior finish.
- Shiny aluminum door trim and handle.
- Stainless steel sign insert.
- Stainless steel front grille.
- 6" legs.
- Coordinate surrounding millwork for proper air circulation. See Sheet 820 for
dimensional requirements.
AREA
Public
LOCATION
In a Pinch
FINISH
Black exterior
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
AMPS
8.1
ROUGH-IN HEIGHT +24"
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 628
628
TRUE FOOD SERVICE
EQUIPMENT, INC.
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400
Fax (636)272-2408 • Toll Free (800)325-6152 • Intl Fax# (001)636-272-7546
Parts Dept. (800)424-TRUE • Parts Dept. Fax# (636)272-9471 • www.truemfg.com
Model:
GDM-19T-LD-MAR-1
GDM-19T-LD
AIA #
Project Name:
Location:
Item #:
SIS #
Qty:
Model #:
Glass Door Merchandiser:
Swing Door Refrigerator with LED Lighting
THIS MODEL ALSO
AVAILABLE IN R290
HYDROCARBON
REFRIGERANT
GDM-19T-LD-MAR-1
GDM-19T-LD
The world’s #1 manufacturer of
glass door merchandisers.
Oversized, factory balanced,
refrigeration system holds 33°F to
38°F (.5°C to 3.3°C).
Exterior - non-peel or chip black
laminated vinyl; durable and
permanent.
Interior - attractive, NSF approved,
white aluminum interior liner with
stainless steel floor.
Self closing door. Positive seal,
torsion type closure system.
"Low-E”, double pane thermal
insulated glass door assembly
with extruded aluminum frame.
The latest in energy efficient
technology.
LED interior lighting provides
more even lighting throughout the
cabinet. Safety shielded.
Entire cabinet structure is foamedin-place using Ecomate. A high
density, polyurethane insulation
that has zero ozone depletion
potential (ODP) and zero global
warming potential (GWP).
Bottom mounted units feature
"No stoop" lower shelf to maximize
product visibility.
Storage on top of cabinet.
Easily accessible condenser coil for
Scan code
for video
ROUGH-IN DATA
Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
Cabinet Dimensions
(inches)
(mm)
Model
GDM-19T-LD
cleaning.
Doors
Shelves
1
4
L
D†
27
247/8
686
632
H
HP
785/8
1/3
1998
1/3
Voltage
115/60/1
230-240/50/1
Cord
Length
NEMA (total ft.)
Amps Config. (total m)
8.1
2.8
5-15P
▲
9
2.74
Crated
Weight
(lbs.)
(kg)
275
125
▲Plug type varies by country.
APPROVALS:
TRUE REFRIGERATION®
MADE IN
U.S.A.
SINCE 1945
2/15
Printed in U.S.A.
AVAILABLE AT:
628
Model:
Glass Door Merchandiser:
GDM-19T-LD-MAR-1
GDM-19T-LD
Swing Door Refrigerator with LED Lighting
STANDARD FEATURES
DESIGN
• True’s commitment to using the highest
quality materials and oversized refrigeration
systems provides the user with colder product
temperatures, and lower utility costs in an
attractive merchandiser that brilliantly displays
packaged food and beverages.
REFRIGERATION SYSTEM
• Factory engineered, self-contained, capillary
tube system using environmentally friendly
(CFC free) 134A refrigerant.
• Extra large evaporator coil balanced with higher
horsepower compressor and large condenser;
maintains cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating evaporator
fan motor(s) and larger fan blades give True
merchandisers a more efficient low velocity,
high volume airflow design. This unique design
ensures faster temperature pull down of warm
product, colder holding temperatures and faster
recovery in high use situations.
• Bottom mounted condensing unit positioned
for easy maintenance. “No stoop” lower shelf
maximizes visibility by raising merchandised
product to higher level.
CABINET CONSTRUCTION
• Exterior - non-peel or chip black laminated vinyl;
durable and permanent.
• Interior - attractive, NSF approved, white
aluminum liner with stainless steel floor.
• Insulation - entire cabinet structure is foamedin-place using Ecomate. A high density,
polyurethane insulation that has zero ozone
depletion potential (ODP) and zero global
warming potential (GWP).
• Welded, heavy duty steel frame rail, black
powder coated for corrosion protection.
• Frame rail fitted with leg levelers.
• Illuminated exterior sign panel. Variety of sign
options available.
DOOR
• “Low-E”, double pane thermal insulated glass
door assembly with extruded aluminum frame.
The latest in energy efficient technology.
• Door fitted with 12" (305 mm) long integrated
handle.
• Self closing door. Positive seal, torsion type
closure system.
• Magnetic door gasket of one piece construction,
removable without tools for ease of cleaning.
SHELVING
• Four (4) adjustable, heavy duty PVC coated wire
shelves 22 9/16”L x 18 1/4”D (574 mm x 464 mm).
Four (4) chrome plated shelf clips included per
shelf.
• Shelf support pilasters made of same material
as cabinet interior; shelves are adjustable on 1/2”
(13 mm) increments.
LIGHTING
• LED interior lighting provides more even
lighting throughout the cabinet. Safety
shielded.
MODEL FEATURES
• Evaporator is epoxy coated to eliminate the
potential of corrosion.
• See our website www.truemfg.com for latest
color and sign offerings.
• Convenient clean-out drain built in cabinet floor.
• Listed under NSF-7 for the storage and/or
display of packaged or bottled product.
ELECTRICAL
• Unit completely pre-wired at factory and ready
for final connection to a 115/60/1 phase, 15 amp
dedicated outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❑❑ 230 - 240V / 50 Hz.
❑❑ White exterior.
❑❑ Stainless steel exterior.
❑❑ Black aluminum interior liner with black
shelving.
❑❑ Stainless steel interior liner.
❑❑ 6" (153 mm) standard legs.
❑❑ 6" (153 mm) seismic/flanged legs.
❑❑ 2 1/2” (64 mm) diameter castors.
❑❑ 4" (102 mm) diameter castors.
❑❑ Red wine thermostat.
❑❑ White wine thermostat.
❑❑ Chocolate thermostat.
❑❑ Barrel lock (factory installed).
❑❑ Additional shelves.
❑❑ TrueFlex gravity feed organizers.
❑❑ Pricing strips.
❑❑ Available in R290 hydrocarbon refrigerant
PLAN VIEW
27"
(686 mm)
7615/16"
(1955 mm)
2413/16"
785/8"
(631 mm)
(1998 mm)
493/4"
(1264 mm)
2415/16"
(634 mm)
13/8"
(35 mm)
ELEVATION
5/16"
WARRANTY*
Three year warranty on all parts METRIC DIMENSIONS ROUNDED UP TO THE
and labor and an additional 2 year
NEAREST WHOLE MILLIMETER
warranty on compressor.
(U.S.A. only)
SPECIFICATIONS SUBJECT TO CHANGE
*RESIDENTIAL APPLICATIONS: TRUE assumes no liability for parts or
labor coverage for component failure or other damages resulting
from installation in non-commercial or residential applications.
PLAN VIEW
(8 mm)
WITHOUT NOTICE
KCL
Model
Elevation
Right
GDM-19T-LD
TFAY119E
TFAY119S TFAY19P
TRUE FOOD SERVICE EQUIPMENT
Plan
3D
Back
TFAY1193
2001 East Terra Lane • O’Fallon, Missouri 63366-4434 • (636)240-2400 • Fax (636)272-2408 • Toll Free (800)325-6152 • Intl. Fax# (001)636-272-7546 • www.truemfg.com
Refrigerator - Glass Door
Mark #
629
MANUFACTURER True
MODEL #
GDM-7-LD-MAR-1
FEATURES
- For all operations without beer and wine service, new and renovation.
- Verify door swing.
- Black exterior finish.
- Shiny aluminum door trim and handle.
- Stainless steel sign insert.
- Custom light shield #905444.
- 2-1/2" legs.
- Coordinate surrounding millwork for proper air circulation. See Sheet 820 for
dimensional requirements.
AREA
Public
LOCATION
In a Pinch
FINISH
Black exterior
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
AMPS
4.5
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 629
629
GDM-7-LD-MAR-1
GDM-7-LD-MAR-1
629
GDM-7-LD-MAR-1
Freezer - Glass Door
Mark #
636
MANUFACTURER True
MODEL #
GDM-7F-LD-MAR-1
FEATURES
- For all operations, both new and renovation, with or without beer and wine
service.
- Verify door swing.
- Black exterior finish.
- Shiny aluminum face frame and handle.
- Stainless steel sign insert.
- Custom lamp shield - Part #905444.
- 2-1/2" legs.
- Coordinate surrounding millwork for proper air circulation. See Sheet 820 for
dimensional requirements.
AREA
Public
LOCATION
In a Pinch
FINISH
Black exterior
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
AMPS
11.1
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 636
636
GDM-7F-LD-MAR-1
GDM-7F-LD-MAR-1
636
GDM-7F-LD-MAR-1
Refrigerator - Glass Door
Mark #
637
MANUFACTURER True
MODEL #
GDM-7-LD-MAR-1
FEATURES
- For all operations, both new and renovation, with beer and wine service.
- Provide with cam lock on bottom of door.
- Verify door swing.
- Black exterior finish.
- Shiny aluminum face frame and handle.
- Stainless steel sign insert.
- Custom lamp shield - Part #905444.
- Two (2) wine shelves.
- 2-1/2" legs.
- Coordinate surrounding millwork for proper air circulation. See Sheet 820 for
dimensional requirements.
AREA
Public
LOCATION
In a Pinch
FINISH
Black exterior
ELECTRICAL
CONNECTION
DR
KW
VOLTS
120
PHASE
1
AMPS
4.5
ROUGH-IN HEIGHT
HP
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
06/08/15
TOWNEPLACE SUITES
MARK# 637
637
GDM-7-LD-MAR-1
GDM-7-LD-MAR-1
637
GDM-7-LD-MAR-1
LAUNDRY
Guest Washer
Mark #
411
AMPS
20.0
MANUFACTURER Speed Queen
MODEL #
SWNBC2SP112TW01
FEATURES
- 14 lb. load capacity.
- Sensor water level.
- Dial-a-fabric control.
- Coin-control kit. (VFY.)
- Energy Star rated.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
1/2", +36"
CW
1/2", +36"
WASTE
ROUGH-IN COMMENTS Standard utility set
IW, 1" hose, +36", to 2"
d i
GAS
GAS SIZE
MBH
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 411
Multi-Housing
411
Micro Display
Commercial Top Load Washer
Rear Control
BUILT FOR RELIABLE PERFORMANCE
e Dependable Eversmooth transmission
e Touch pad selector
e U.S. DOE compliance for energy and
water efficiencies
e Extract speed of 710 RPMs spins clothes out drier
e 210° agitation stroke delivers superior washability
e Commercial-grade stainless steel or porcelain enamel washtub
e Automatic balancing suspension system
MICRO DISPLAY CONTROL
e Easy-to-read digital display
e Cycle programming flexibility
e Shows cycle time remaining
e Card and coin transactions
411
MICRO DISPLAY COMMERCIAL TOP LOAD WASHER SPECIFICATIONS
SWNBC2PP112TW01 SWNBC2SP112TW01 SWNBC2PP112TW02 SWNBY2PP112TW01 SWNBY2SP112TW01
SWNBX2SP112TW01
SWNBX2PP112TW02
Prep Coin “X”
Prep Coin “X”
MODELS and ACTIVATION
{NOTE: Coin Box
Sold Separately}
Coin “C”
Appearance
Color
Control Panel Selection
Meter Case
Water and Energy Info
Modified Energy Factor “MEF”
ft³/kWh/cycle (Liters/kWh/cycle)
Water Factor “WF”
gal/ft³ (Liters/Liter/cycle)
Water Consumption - gal (Liter)
White
Rear
Standard
Capacity
1.69
(47.89)
7.9
(1.06)
24.6
(93.0)
Coin “C”
White
Rear
Standard
Capacity
Coin “C”
White
Rear
High
Capacity
1.69 (47.89) 1.69 (47.89)
7.9
(1.06)
24.6
(93.0)
7.9
(1.06)
24.6
(93.0)
Prep Card “Y”
Prep Card “Y”
White
Rear
White
Rear
--
--
1.69
(47.89)
7.9
(1.06)
24.6
(93.0)
1.69
(47.89)
7.9
(1.06)
24.6
(93.0)
White
Rear
Standard
Capacity
White
Rear
High
Capacity
1.69
(47.89)
7.9
(1.06)
24.6
(93.0)
1.69
(47.89)
7.9
(1.06)
24.6
(93.0)
Technical Info
Basket Volume - cu ft (liters): 3.26 (92.3) Porcelain
Stainless
Porcelain
Porcelain
Stainless
Stainless
Net Weight - lb (kg)
190 (86)
190 (86)
190 (86)
190 (86)
190 (86)
190 (86)
Shipping Weight - lb (kg)
210 (95)
210 (95)
210 (95)
210 (95)
210 (95)
210 (95)
Electrical Requirements - 120/60/1 15 amp Yes
Yes
Yes
Yes
Yes
Yes
Overall Dimensions WxDxH - in (mm): 25 5/8 (651) x 28 (711) x 43 (1092) | High Capacity: 25 5/8 (651) x 28 (711) x 43 7/8 (1114)
Cabinet Height - in (mm)
36 (914)
36 (914)
36 (914)
36 (914)
36 (914)
36 (914)
Temperature - Hot, Warm, Cold
Yes
Yes
Yes
Yes
Yes
Yes
Cycles - Normal/Hot, Normal/Warm, Perm Press/Warm, Delicate/Cold
Motor 1/2 HP
1/2 HP
1/2 HP
1/2 HP
1/2 HP
1/2 HP
Water Pressure PSI (Bar) - 20-120 (1.4-8.3)
Yes
Yes
Yes
Yes
Yes
Yes
Spin Speed - RPM (high 710, low 474)
2 Speed
2 Speed
2 Speed
2 Speed
2 Speed
2 Speed
Performance/Features
Manual Audits
Yes
Yes
Yes
Yes
Yes
Yes
UL
UL
UL
UL
UL
Agency Approval
c us
c us
c us
c us
c us
cULus
Porcelain
190 (86)
210 (95)
Yes
36 (914)
Yes
1/2 HP
Yes
2 Speed
Yes
cULus
For the most accurate information, the installation
guide should be used for all design and
construction purposes. Due to continuous product
improvements, design and specifications subject
to change without notice. The quality management
system of Alliance Laundry Systems’ Ripon facility
has been registered to ISO9001:2008.
© 2014 Alliance Laundry Systems LLC AM14-0358
Speed Queen | 800-345-5649 | www.speedqueen.com/route
Guest Dryer - Electric
Mark #
412
AMPS
30 CCT
MANUFACTURER Speed Queen
MODEL #
SDET07WF
FEATURES
- Free standing unit.
- Cool-down cycle.
- Large capacity filter.
- Coin-control kit. (VFY.)
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120/208
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
HEIGHT
MBH
GAS SIZE
COMMENTS
VENTILATION
CONNECTION TYPE
12/01/15
Dryer
DUCT SIZE
4"
COMMENTS
Vent to outside air
CFM 400
STAT. PRESS.
VENT HEIGHT
TOWNEPLACE SUITES
+8"
MARK# 412
412
qwert
MULTI-HOUSING
Micro-DISPLAYcontrol
Coin-Operated Washers & Dryers
SWTT20/SWTT21
SDET07/SDGT09
SSET07/SSGT09
SSET17/SSGT19
Topload Washer
Single Load Dryer
Stack Dryer - Solid Door
Stack Dryer - See-Thru Door
OUR STRENGTH COMES FROM WITHIN
412
Let Speed Queen Lead the Way...
HEAVY-DUTY COMME
As America’s largest commercial laundry equipment
Micro-DISPLAYcontrol
“ENERGY STAR®” Qualified
Today, multi-housing owners and
• The MDC topload
washer models are
factory-equipped with
“Water Saver” cycle
setting that is ultra energy efficient. Total
water consumption is only 23.7 gal. This
will reduce water consumption versus
conventional commercial toploaders by
29% and by 49% versus homestyle
in-unit apartment topload washers.
managers are constantly confronted
with improving property amenity
manufacturer, Speed Queen
services for attracting and retaining
residents. They are challenged to
conserve energy and improve revenue
stands for innovation. As
cash flow.
Speed Queen’s Micro-DISPLAYcontrol
a leader in multi-housing
(MDC) washers and dryers bring
solutions to these issues. The attractive electronic controls will brighten
laundry technology, our
up any laundry room facility. They are
designed with special features to
electronically-controlled
reduce water and energy consumption.
Laundry room activity can be verified
with MDC manual audit mode for
washers, dryers and stacked
• The MDC is ENERGY STAR qualified as it
meets Department of Energy modified
energy factor (MEF) for commercial
clothes washers.
• The wash cycle is designed exclusively
for multi-housing laundry rooms with
extended wash/rinse and spin times
for superior washing performance.
checking coin and cycle counts.
dryers will provide you with
• Multi-Housing cycle 26.75 min. plus fill
quality, efficiency, conve-
• Water fall fill for enhanced wash/rinse
• Cold water rinses on factory default setting
• 2-speed wash/spin
nience, and flexibility. Since
• "True" delicate cycles
Residents will find the laundry process
1908 we have been com-
a breeze with the stream-lined, easyto-use Micro-DISPLAYcontrol.
• Attractive high-tech electronic display.
mitted to our tradition of
quality products, backed by
superior customer service.
• Coin countdown.
• Time remaining countdown.
• Touch pad control.
• Audible sound annunciator signal.
• Bright, easy-to-read status lights.
Your Authorized Speed Queen Route
Operator can design an MDC laundry
room solution to meet the needs of
any multi-housing property.
Topload Washer
SWTT20/SWTT21
412
Multi-Housing Line
Micro-DISPLAYcontrol Coin-Operated Laundry Equipment
ERCIAL WASHER
HEAVY-DUTY COMMERCIAL DRYER/STACK DRYER
Superior Wash/Rinse Action
Superior Convenience
Stack Dryer Features
• Curved four vane
polypropylene agitator
with 210° wash stroke,
longest in the industry,
produces superb
washing results.
• A wide door opening of 2.06 sq. ft. is the
industry largest, offering residents easy
loading and unloading.
• See-through door model options.
• Door is reversible for installation flexibility,
and up-front lint filter is easy to clean
and secured.
High Speed Spin-Extract
• With a higher spin speed of 710 RPM,
clothes come out drier. In fact, the
higher spin speed of these new models
will lower moisture retention by 3.4%
over previous models. This means faster
drying, increased cycle turns, and
satisfied users.
Automatic Balance System
• Residents will appreciate the Automatic
Balance System (ABS) for smooth and
quiet operation, even on wood floors.
The ABS provides
the industry’s
best out-ofbalance handling,
completing wash
cycles without
interruption.
• A space saver! Two dryers in the space
of one, both operating independently.
• 100% serviceable from the front.
• Strongbox center section security
module to reduce vandalism.
TM
Drying and Energy Dynamics
• Durable galvanized steel cylinder with
extra large 18 lb capacity. The gentle
tumble action minimizes wrinkles.
• Quiet, high efficiency exhaust blowers
with superior airflow of 220 cu. ft. per
minute for fast drying and lower
operating costs.
• Efficient dryer heating with 25,000
Btu (gas models) and 5,350 Watts
(electric models).
Quality Washer Components
• Durable stainless steel and porcelain
enamel washtub.
• Scratch resistant hard-baked porcelain
enamel tops and lids.
• Long lasting galvanized steel cabinet.
• Strong box security on meter case.
TM
• Dependable, Eversmooth transmission.
TM
• Heavy-duty, 1/2 HP, 2-speed motor.
• Start capacitor lowers amperage draw.
• Corrosion-resistant polypropylene pump.
• Pump clips for service convenience.
• Rear self-leveling legs.
• Unit is 100% front serviceable.
Dryer
SDET07/SDGT09
Stack Dryer
SSET07/SSET17
SSGT09/SSGT19
412
Specifications
Stack Dryer
Dryer
Washer
SWTT20, SWTT21
Electric:
Gas:
SDET07
SDGT09
Electric:
Gas:
SSET07, SSET17,
SSGT09, SSGT19
Width - in (mm)
25 5/8” (651)
Width - in (mm)
26 7/8” (683)
Width - in (mm)
26 7/8” (683)
Depth - in (mm)
28” (711)
Depth - in (mm)
28” (711)
Depth - in (mm)
28” (711)
Height - in (mm)
36” (914)
Height - in (mm)
36” (914)
Height - in (mm)
76 5/8” (1946)
Work Surface
Height - in (mm)
Cycle/Temperature
43” (1092)
Work Surface
Height - in (mm)
43” (1092)
Door Type
Solid, Window
Normal/Hot
Normal/Warm
Permanent Press/Warm
Delicate/Cold
26.75 minutes
7.0 (201)
Cylinder Volume cu. ft. (liters)
7.0 (201)
Cylinder Volume cu. ft. (liters)
Motor HP
1/3 HP, 5.5 amps
Motor HP
1/3 HP, 5.5 amps
Motor - RPM
60 Hz: 1725
Motor - RPM
60 Hz: 1725
Btu Per Hour
25,000 (6,300 kcal)
Basket Volume cu. ft. (liters)
2.69 (76)
Btu Per Hour
25,000 (6,300 kcal)
Heating Element
5350 Watts, 240 Volt.
Also 4750 Watts, 208 Volt.
Water Pressure psi (bar)
Pressure fill – 20 to 120
(1.4/8.3)
Spin Speed - RPM
High 710
Low 474
Activation
Coin-Operated
Motor HP
(Capacitor Start and
Thermal Protected)
Top and Lid Finish
2-speed, 1/2 HP reversing
for 1725 or 1140 RPM
Cycle Time
Heating Element
Porcelain
Colors
White
Electrical
120/60/1-15 amp
Specifications and
Circuit Requirements
Weight - lb (kg)
190 (86)
Shipping Weight lb (kg)
210 (95)
Agency Approval
UL
At Speed Queen, we’re confident that our heavy duty commercial
washers and dryers are built better to last longer, that we’re
offering the following limited warranty to prove it: Through
three years* — Any part of the washer, dryer or stack dryer.
Through five years* — The washer transmission assembly.
Lifetime* — The stainless steel tub.
* Parts only. Labor not included. See Speed Queen Warranty Bond
for specifics.
Due to continuous product improvements, design and specifications
subject to change without notice. The quality management systems
at all Alliance Laundry Systems manufacturing facilities are
registered as ISO 9001:2000 compliant.
5350 Watts, 240 Volt.
Also 4750 Watts, 208 Volt.
Type of Gas
Factory-equipped natural/
(Gas models only)
mixed gas. Convertible
to LP gas.**
Utility Connections - Gas: 3/8” NPT (9.5)
in (mm)
Type of Gas
(Gas models only)
Factory-equipped natural/
mixed gas. Convertible
to LP gas.**
Utility Connections - Gas: 3/8” NPT (9.5)
in (mm)
Air Outlet Diameter - 4” (102)
in (mm)
Air Outlet Diameter - 4” (102)
in (mm)
Exhaust Airflow* cfm (liters/sec.)
Exhaust Airflow* cfm (liters/sec.)
220 (105)
220 (105)
Maximum Exhaust
0.6” WC
Static Back Pressure
Maximum Exhaust
0.6” WC
Static Back Pressure
Activation
Electrical
Specifications and
Circuit Requirements
Coin-Operated
Electric: 120/240/60/1-30 amp
120/208/60/1-30 amp
Gas: 120/60/1-15 amp
Colors
White
Weight - lb (kg)
Electric: 135 (61)
Gas: 140 (64)
Shipping Weight lb (kg)
Electric: 145 (66)
Gas: 150 (68)
Agency Approval
Electric: UL
Gas: CSA Star
Activation
Coin-Operated
Electrical
Specifications and
Circuit Requirements
Colors
Electric: 120/240/60/1-30 amp
120/208/60/1-30 amp
Gas: 120/60/1-15 amp
White
Weight - lb (kg)
Electric: 265 (120)
Gas: 275 (125)
Shipping Weight lb (kg)
Electric: 280 (127)
Gas: 290 (132)
Agency Approval
Electric: UL
Gas: CSA Star
* Measured at point of exit from dryer. The quality management systems at all Alliance Laundry Systems facilities have been awarded
ISO 9001 certification. Also available in 50 Hz. Features and certifications may vary by model.
** IMPORTANT: Any product revisions or conversions must be made by the Manufacturer’s Authorized Dealers, Distributors,
or local service personnel.
© Copyright 2005 Alliance Laundry Systems LLC
MDC Topload DOE “J1” Testing
Water Temp.
Hot
Cold
Total Water
Consumption
DOE
Cycle %
Hot
9.1
14.6
23.7 Gallons
14%
Warm
3.5
20.2
23.7 Gallons
49%
Cold
0.0
23.7
23.7 Gallons
Average hot water cycle.
37%
2.99 gal.
* Water usages may vary from your particular application.
All rinses automatically use cold water.
“ENERGY STAR” Qualified - MEF 1.50
www.speedqueen.com
AM05-218
®
Folding Table
Mark #
413
MANUFACTURER Generic
MODEL #
Generic
FEATURES
- Item by G.C.; NIKEC.
- Free standing unit.
- Size and shape as shown on plans.
AREA
Public
LOCATION
Guest Laundry
FINISH
ELECTRICAL
CONNECTION
VOLTS
ROUGH-IN HEIGHT
HP
KW
AMPS
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
MBH
GAS SIZE
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
12/01/15
Dryer
DUCT SIZE
4"
COMMENTS
Vent to outside air
CFM 400
STAT. PRESS.
VENT HEIGHT
TOWNEPLACE SUITES
+8"
MARK# 413
Guest Dryer - Gas
Mark #
414
AMPS
15.0
MANUFACTURER Speed Queen
MODEL #
SDGT09
FEATURES
- Gas fired unit.
- Free standing unit.
- Cool-down cycle.
- Large capacity filter.
- Coin-control kit. (VFY.)
- Optional to Item 412, electric guest dryer.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
1/2"
MBH
25
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
12/01/15
Dryer
DUCT SIZE
4"
COMMENTS
Vent to outside air
CFM 400
STAT. PRESS.
VENT HEIGHT
TOWNEPLACE SUITES
+8"
MARK# 414
414
qwert
MULTI-HOUSING
®
Micro-DISPLAYcontrol
Coin-Operated Washers & Dryers
Horizon Line
SWFT61
SWFT63
SFET07
SFGT09
STET17
STGT19
Front Control Washer (Pump Drain)
Front Control Washer (Gravity Drain)
Electric Dryer
Gas Dryer
Electric Stack Washer/Dryer
Gas Stack Washer/Dryer
OUR STRENGTH COMES FROM WITHIN
414
Let Speed Queen Lead the Way...
As America’s largest commercial laundry equipment
manufacturer, Speed Queen
stands for innovation. As
a leader in multi-housing
laundry technology, our
electronically-controlled
washers, dryers and stacked
Micro-DISPLAYcontrol
Today, property owners and managers
are continuously confronted with the
challenge to improve property amenity
services for attracting and retaining
residents while improving revenue flow.
They are challenged to conserve energy and
provide ADA compliant laundry equipment.
Speed Queen’s Micro-DISPLAYcontrol
(MDC) frontload washers and dryers
bring solutions to these issues. The
attractive electronic control panels will
brighten up any laundry room facility.
The Horizon washers are ENERGY STAR®
qualified. They reduce water consumption
and save energy over conventional
commercial topload washers. The front
control design meets all ADA standards.
Laundry activity can be verified through
a manual audit for checking coin and
cycle start counts.
washer/dryers will provide
HORIZON FRON
Ultra-High Efficient
Wash System
• The MDC offers the four energy efficient
wash cycles that integrate into a 6 speed
wash system (2 wash, 1 distribution and
3 spin/extract) for cleaner clothes with
less energy costs.
• Ultra low water consumption uses only
18.5 gal. on a normal commercial 12 lb
load. This uses 14 to 16 gal. less than a
commercial topload washer based on
DOE appendix “J1” test.
• Cost of heating the water is less
because MDC Horizon washers average
hot water usage is only 1.95 gal. per cycle.
• ENERGY STAR® qualified. Exceeds the
mininum MEF (modified energy factor)
to qualify for an ENERGY STAR rating.
• Sewer costs are dramatically reduced
due to decrease in water usage.
you with quality, efficiency,
convenience, and flexibility.
Residents will find the laundry process a
Since 1908, we have
been committed to our
breeze with the stream-lined, easy-to-use
Micro-DISPLAYcontrol.
• Attractive high tech electronic display.
• Coin countdown.
tradition of quality
• Time remaining countdown.
• Touch pad control.
products, backed by
• Audible sound annunciator signal.
• Bright, easy-to-read status lights.
superior customer service.
Your Authorized Speed Queen Route
Operator can design an MDC laundry
room solution to meet the needs of any
multi-housing property.
Frontload Washer
SWFT61/SWFT63
Multi-Housing
414
Micro-DISPLAYcontrol Coin-Operated Horizon Line Laundry Equipment
NTLOAD WASHER
Horizon Quality Features
• Front mount supply dispenser automatically adds detergent, bleach and softener.
• The Horizon washer
is designed with
front controls for
compliance to all
ADA standards
for reach.
• See-through door
convenience with
180° degree door
swing for easy
loading. The hinge
is robust 10” steel
piano style to
maintain door
alignment.
• The stainless steelwashtub has 4,915
perforated holes with
3 full length baffles
to maximize mechanical wash action for
cleaner clothes.
• High-speed extract of 1,000 RPM final
spins exerting 305 G-Force to maximize
moisture removal from clothes.
• All drive components-pulley, trunion, tub
shaft and bearings are manufactured with
rugged steel construction.
FRONTLOAD DRYER
Superior Convenience
STACK WASHER/DRYER
Saves Space And Energy
• A wide door opening of 2.06 sq. ft. is the
industry’s largest, offering residents easy
loading and unloading.
• This innovative stacked concept takes
up half the floor space that a conventional washer and dryer do when
situated side by side.
• Door is reversible for installation flexibility,
and up-front lint filter is easy to clean
and secured.
• The front placement of controls, lint filter
and loading door complies 100% with
ADA standards.
• The freestanding softmount design can
be installed on any floor at any level.
• Both the washer and dryer have the
same hook ups and connections as
a standard washer and dryer, so no
additional plumbing or electrical
change is needed.
• Having a window in both the washer
and dryer enables customers to view
their entire laundering process.
Drying and Energy Dynamics
• Durable galvanized steel cylinder with
extra large 18 lb capacity. Gentle tumble
action to minimizes wrinkles.
• Quiet, efficient exhaust blowers with
superior airflow of 220 cu. ft. per minute
for fast drying and lower operating costs.
• Efficient dryer heating with 25,000
Btu (gas models) and 5,350 Watts
(electric models).
• Heavy-duty 3/4 HP drive motor with
reversing wash action.
• Free standing
design features 4 large
automotive
size shocks
so the
washer can
be installed
on any floor
type or level.
Dryer
SFET07/SFGT09
Stacked Washer/Dryer
STET17/STGT19
414
Specifications
Horizon Line
Dryer
Washer
Front Control: SWFT61
SWFT63
Stack Washer/Dryer
Electric: STET17
Gas:
STGT19
Electric: SFET07
Gas:
SFGT09
Width - in (mm)
26 7/8” (683)
Width - in (mm)
26 7/8” (683)
Width - in (mm)
26 7/8” (683)
Depth - in (mm)
28” (711)
Depth - in (mm)
28” (711)
Depth - in (mm)
28” (711)
Height - in (mm)
43” (1092)
Height - in (mm)
43” (1092)
Height - in (mm)
76 5/8” (1946)
Cycle/Temperature
Normal/Hot
Normal/Warm
Permanent Press/Warm
Delicate/Cold
Cylinder Volume cu. ft. (liters)
7.0 (198)
Colors
White, Bisque
Motor HP
1/3 HP, 5.5 amps
Net Weight - lb (kg)
Cycle Time
27.0 minutes
Heating Element*
5350 Watts, 240 Volt
Basket Volume cu. ft. (liters)
Water Pressure psi (bar)
2.84 (80)
Btu Per Hour**
25,000 (6,300 kcal)
Shipping Weight lb (kg)
Electric:
Gas:
Electric:
Gas:
Agency Approvals
UL, CSA
Pressure fill – 20 to 120
(1.4/8.3)
Type of Gas
(Gas models only)
Factory-equipped natural/
mixed gas. Convertible
to LP gas.◆
Spin Speeds - RPM
500, 650, 1000
Activation
Coin-Operated / MDC
Motor HP
(Thermal Protected)
Variable Speed Induction,
3/4 HP
Top Finish
Porcelain
Colors
White, Bisque
Electrical
120/60/1-15 amp
Specifications and
Circuit Requirements
Net Weight - lb (kg) 250 (113)
Shipping Weight lb (kg)
270 (123)
Agency Approval
UL
360 (163)
365 (166)
390 (177)
395 (179)
Refer to the separate washer and dryer charts for all other
specifications of stacked unit.
Utility Connections - 3/8” NPT (9.5)
in (mm)
Air Outlet Diameter - 4” (102)
in (mm)
Exhaust Airflow*** cfm (liters/sec.)
220 (105 liters/sec.)
Maximum Exhaust
Static Back Pressure
0.6” WC
Activation
Coin-Operated/MDC
Top Finish
Porcelain
Colors
Electrical
Specifications and
Circuit Requirements
White, Bisque
Electric: 120/240/60/1-30 amp
Gas: 120/60/1-15 amp
Net Weight - lb (kg)
Electric:
Gas:
Electric:
Gas:
UL, CSA
Shipping Weight lb (kg)
Agency Approvals
At Speed Queen, we’re confident that our heavy duty
commercial washers and dryers are built better to last
longer, that we’re offering the following limited warranty
to prove it: Through three years* — Any part of the
washer or dryer. Through five years* — The bearings and
bearing seal assembly of the washer. Through lifetime* —
The stainless steel wash tub for the life of the washer.
* Parts only. Labor not included. See Speed Queen Warranty Bond
for specifics.
Due to the continuous product improvements, design and
specifications subject to change without notice. The quality
management systems at all Alliance Laundry Systems manufacturing facilities are registered as ISO 9001:2000 compliant.
150 (68)
155 (70)
160 (73)
165 (75)
©Copyright 2006 Alliance Laundry Systems LLC
* Electric Model
** Gas Model
*** Measured at point of exit from dryer.
Front Control Design
◆ IMPORTANT: Any product revisions or conversions must be
made by the Manufacturer’s Authorized Dealers, Distributors,
or local service personnel.
100% compliant to ADA (Americans with Disabilities
Act) national standard US Access Board Guidelines of
July 23, 2004 for unobstructed reach range guidelines.
MDC Frontload DOE “J1” Testing
Water Temp
Hot
Cold
Hot
5.9
12.6
Total Water
DOE
Consumption Cycle %
18.5 Gal
14%
Warm
2.3
16.2
18.5 Gal
49%
Cold
0.0
18.5
18.5 Gal
37%
Average Hot Water Per Cycle
1.95 Gal
* Water usages may vary from your particular application.
All rinses automatically use cold water.
®
www.speedqueen.com
AM06-201
Guest Washer (ADA)
Mark #
415
AMPS
20.0
MANUFACTURER Speed Queen
MODEL #
SFNBCASP113TW01
FEATURES
- Front load, ADA approved washer.
- 14 lb. load capacity.
- Sensor water level.
- Dial-a-fabric control.
- Coin-control kit. (VFY.)
- Optional to Item 411, guest washer.
- Energy Star rated.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
1/2", +36"
CW
1/2", +36"
WASTE
ROUGH-IN COMMENTS Standard utility set
IW, 1" hose, +36", to 2"
d i
GAS
GAS SIZE
HEIGHT
MBH
COMMENTS
VENTILATION
CONNECTION TYPE
CFM
STAT. PRESS.
VENT HEIGHT
DUCT SIZE
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 415
Multi-Housing
415
Micro Display
Commercial Front Load Washer
Front Control
BUILT FOR RELIABLE PERFORMANCE
e High speed extract of 1200 RPM spins
clothes out drier
e U.S. DOE compliance for energy and
water efficiencies
e Ultra high efficient with high speed extract and
low water consumption
e Commercial-grade stainless steel washtub
e Extra-wide 15.5˝ door opening and 180º door swing
e Multi-compartment supply dispenser
ENERGY STAR® Certified
MICRO DISPLAY CONTROL
e Easy-to-read digital display
e Cycle programming flexibility
e Card and coin transactions
e Shows cycle time remaining
415
MICRO DISPLAY COMMERCIAL FRONT LOAD WASHER SPECIFICATIONS
SFNBCASG113TW01 SFNBCASP113TW01
SFNBYASG113TW01
SFNBYASP113TW01
SFNBXASG113TW01
SFNBXASP113TW01
Prep Card“Y”
Prep Card“Y”
Prep Coin“X”
Prep Coin“X”
MODELS and ACTIVATION
{NOTE: Coin Box
Sold Separately}
Coin“C”
White
Front
High Capacity
2.98 (84.48)
2.98 (84.48)
2.98 (84.48)
3.8 (0.52)
11.7 (44.3)
3.8 (0.52)
11.7 (44.3)
3.8 (0.52)
11.7 (44.3)
3.42 (96.8)
270 (122)
290 (132)
3.42 (96.8)
270 (122)
290 (132)
3.42 (96.8)
270 (122)
290 (132)
Yes
Yes
0.9 HP 671 W
Yes
Yes
0.9 HP 671 W
Yes
Yes
0.9 HP 671 W
Pump
Yes
Gravity
Yes
Pump
Yes
Yes
Yes
Yes
Yes
Yes
Yes
cULus
cULus
cULus
13.1 in.
(333 mm)
27.73 in. (704 mm)
2.04 in.
(52 mm)
36.94 in. (938 mm)
24 in. (610 mm)
1.5 in. (38 mm)
White
Front
High Capacity
44.375 in. (1126 mm)
32 in. (813 mm)
For the most accurate information,
the installation guide should be
used for all design and construction
purposes. Due to continuous
product improvements, design
and specifications subject to
change without notice. The quality
management system of Alliance
Laundry Systems’ Ripon facility has
been registered to ISO9001:2008.
White
Front
--
14.6 in.
(371 mm)
Coin“C”
Appearance
Color
White
White
White
Control Panel Selection
Front
Front
Front
Meter Case
High Capacity High Capacity -Water and Energy Info
Modified Energy Factor “MEF”
2.98 (84.48) 2.98 (84.48) 2.98 (84.48)
ft³/kWh/cycle (Liters/kWh/cycle) Water Factor “WF” - gal/ft³ (Liters/Liter/cycle) 3.8 (0.52)
3.8 (0.52)
3.8 (0.52)
Water Consumption - gal (Liter) 11.7 (44.3)
11.7 (44.3)
11.7 (44.3)
Technical Info
Stainless Steel Basket Volume - cu. ft. (liters) 3.42 (96.8)
3.42 (96.8)
3.42 (96.8)
Weight - lb (kg)
270 (122)
270 (122)
270 (122)
Shipping Weight - lb (kg)
290 (132)
290 (132)
290 (132)
Electrical Requirements - 120/60/1-15 amp Overall Dimensions WxDxH - in (mm): 26 7/8 (683) x 27 3/4 (704) x 44 3/8 (1126)
Cycle - Normal, Perm Press, Delicates
Yes
Yes
Yes
Temperature - Hot, Warm, Cold
Yes
Yes
Yes
Motor 0.9 HP 671 W 0.9 HP 671 W 0.9 HP 671 W
Water Pressure PSI (Bar) - 20-120 (1.4-8.3)
Drain
Gravity
Pump
Gravity
Spin Speeds - 500, 800, 1200 RPM Yes
Yes
Yes
Performance/Features
Freestanding Front Load Washer
Yes
Yes
Yes
Safe Door Lock Release at
Yes
Yes
Yes
Cycle Completion
Agency Approval
cULus
cULus
cULus
26.875 in. (683 mm)
FLW2333N_SVG
Models Equipped With Drain Hose - Gravity Drain without drain hose
© 2014 Alliance Laundry Systems LLC AM14-0326
Speed Queen | 800-345-5649 | www.speedqueen.com/route
Guest Dryer - Electric (ADA)
Mark #
416
AMPS
30.0
MANUFACTURER Speed Queen
MODEL #
SDEBCASG171TW01
FEATURES
- Front loading, ADA approved unit.
- Free standing unit.
- Cool-down cycle.
- Large capacity filter.
- Coin-control kit. (VFY.)
- Optional to Item 412, electric guest dryer.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120/240
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
HEIGHT
MBH
GAS SIZE
COMMENTS
VENTILATION
CONNECTION TYPE
12/01/15
Dryer
DUCT SIZE
4"
COMMENTS
Vent to outside air
CFM 400
STAT. PRESS.
VENT HEIGHT
TOWNEPLACE SUITES
+8"
MARK# 416
416
416
Guest Dryer - Gas (ADA)
Mark #
417
AMPS
15.0
MANUFACTURER Speed Queen
MODEL #
SDGBCAGS111TW01
FEATURES
- Front loading, ADA approved unit.
- Free standing unit.
- Cool-down cycle.
- Large capacity filter.
- Coin-control kit. (VFY.)
- Optional to Item 414, gas guest dryer.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
SR
VOLTS
120
ROUGH-IN COMMENTS
1
ROUGH-IN HEIGHT +42"
HP
KW
PHASE
GFI
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
1/2"
MBH
25
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
12/01/15
Dryer
DUCT SIZE
4"
COMMENTS
Vent to outside air
CFM 400
STAT. PRESS.
VENT HEIGHT
TOWNEPLACE SUITES
+8"
MARK# 417
417
417
Stacked Guest Dryer - Electric
Mark #
418
MANUFACTURER Speed Queen
MODEL #
SSEBCAGS171TW01
FEATURES
- (2) dryers banded together to form one unit.
- Verify cord and plug requirements with manufacturer and local jurisdiction.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
(2) SR
VOLTS
120/240
1
AMPS
30.0
ROUGH-IN HEIGHT +36", +72"
HP
KW
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
MBH
GAS SIZE
HEIGHT
COMMENTS
VENTILATION
CONNECTION TYPE
DUCT SIZE
(2) Dryer
CFM 220 ea.
4" diameter
STAT. PRESS.
VENT HEIGHT
+6", +45"
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 418
Multi-Housing
418
Micro Display
Commercial Stack Dryer
Front Control
BUILT FOR RELIABLE PERFORMANCE
e Industry’s largest door opening 2.06 sq. ft. (1914 cm²)
e Quiet, efficient blower system
e Door is reversible for installation flexibility
e End-of-cycle signal
e ADA compliant (bottom dryer only)
e High efficiency exhaust blower with superior airflow
220 cfm (105 liters/sec)
e 100% serviceable from the front
e Space-saving narrow cabinet 26-7/8" (683 mm)
e Upfront lint filter easy to clean and secured
e Durable galvanized steel cylinder
MICRO DISPLAY
CONTROL
e Easy-to-read digital display
e Touch pad selection combines temperature and cycle
e Manually program and audit
e Card and coin transactions
418
MICRO DISPLAY COMMERCIAL STACK DRYER SPECIFICATIONS
SSEBCAGS151TW01 SSEBYAGS151TW01
SSEBCAGS171TW01 SSEBYAGS171TW01 SSEBXAGS171TW01
SSGBCAGS111TW01 SSGBYAGS111TW01 SSGBXAGS111TW01
MODELS
and
ACTIVATION
{NOTE:
Coin Box Sold
Separately}
Coin “C”
Appearance
Color
White
Control Panel Selection
Front
Meter Case
High Capacity
Solid Door (no window)
Yes
Technical Info
Cylinder Volume cu. ft. (liters)
7.0 (198) (ea)
Cycle Temperature - High, Low, Medium, Delicates
Motor (Capacitor Start and Thermal Protected) - 1/3 HP
Elec
265 (120)
Weight - lb (kg)
Gas
275 (125)
Elec
280 (127)
Shipping
Weight - lb (kg)
Gas
290 (132)
Elec
120/240/60/1-30 amp*
Electrical
Requirements (ea)
Gas
120/60/1-15 amp
Prep Card “Y”
Prep Coin “X”
White
Front
-Yes
White
Front
High Capacity
Yes
7.0 (198) (ea)
7.0 (198) (ea)
265 (120)
275 (125)
280 (127)
290 (132)
120/240/60/1-30 amp*
120/60/1-15 amp
265 (120)
275 (125)
280 (127)
290 (132)
120/240/60/1-30 amp*
120/60/1-15 amp
* Electric dryers come equipped
for 120/240/60/1 operation. They
can be field converted to operate on
120/208/60/1 with optional 61928
conversion kit.
** Gas dryers can be field converted
for operation on LP gas with optional
458P3 conversion kit.
For the most accurate information, the
installation guide should be used for all
design and construction purposes. Due
to continuous product improvements,
design and specifications subject to
change without notice. The quality
management system of Alliance
Laundry Systems’ Ripon facility has been
registered to ISO9001:2008.
Overall Dimensions - WxDxH in (mm): 26 7/8 (683) x 29 (737) x 78 3/16 (1986)
4.5 in.
11.4 cm
23.5 in.
59.7 cm
Yes
Yes
cULus
cCSAus
*36.94 in. (93.8 cm)
8 in.
20.3 cm
4 (102) 220 (105)
-5350W, 240V
25,000 Btu
15.5 in. (39.4 cm)
8.875 in.
22.5 cm
*78.17 in. (198.6 cm)
*46.7 in. (118.6 cm)
Type Of Gas (Gas Models Only) ** Factory-Equipped Natural/Mixed Gas
4 (102) Air Outlet Diameter - in (mm)
4 (102) Exhaust Airflow cfm (liters/sec) 220 (105)
220 (105)
4750W, 208V
-Elec
5350W, 240V
5350W, 240V
Heating Element (ea) Gas
25,000 Btu
25,000 Btu
Performance/Features
Cycle Status Indicators
Yes
Yes
Touch Pad Control with Sound Annunciator Yes
Yes
Elec
cULus
cULus
Agency Approval
Gas
cCSAus
cCSAus
4 in.
10.2 cm
28 in.
(71.1 cm)
* With leveling legs turned into base.
NOTE: Exhaust openings are 10.2 cm (4 inch) metal ducting.
26.875 in.
68.3 cm
*15.44 in.
39.2 cm
DRY2536N
© 2013 Alliance Laundry Systems LLC AM14-0328
Speed Queen | 800-345-5649 | www.speedqueen.com/route
Stacked Guest Dryer - Gas
Mark #
419
MANUFACTURER Speed Queen
MODEL #
SSGBCASGS111TW01
FEATURES
- (2) dryers banded together to form one unit.
- Verify cord and plug requirements with manufacturer and local jurisdiction.
AREA
Public
LOCATION
Guest Laundry
FINISH
White
ELECTRICAL
CONNECTION
(2) SR
VOLTS
120
1
AMPS
15.0
ROUGH-IN HEIGHT +36", +72"
HP
KW
PHASE
ROUGH-IN COMMENTS
PLUMBING
HW
CW
WASTE
ROUGH-IN COMMENTS
GAS
GAS SIZE
(2) 1/2"
MBH
25 ea.
HEIGHT
POC
COMMENTS
VENTILATION
CONNECTION TYPE
DUCT SIZE
(2) Dryer
CFM 220 ea.
4" diameter
STAT. PRESS.
VENT HEIGHT
+6", +45"
COMMENTS
12/01/15
TOWNEPLACE SUITES
MARK# 419
Multi-Housing
419
Micro Display
Commercial Stack Dryer
Front Control
BUILT FOR RELIABLE PERFORMANCE
e Industry’s largest door opening 2.06 sq. ft. (1914 cm²)
e Quiet, efficient blower system
e Door is reversible for installation flexibility
e End-of-cycle signal
e ADA compliant (bottom dryer only)
e High efficiency exhaust blower with superior airflow
220 cfm (105 liters/sec)
e 100% serviceable from the front
e Space-saving narrow cabinet 26-7/8" (683 mm)
e Upfront lint filter easy to clean and secured
e Durable galvanized steel cylinder
MICRO DISPLAY
CONTROL
e Easy-to-read digital display
e Touch pad selection combines temperature and cycle
e Manually program and audit
e Card and coin transactions
419
MICRO DISPLAY COMMERCIAL STACK DRYER SPECIFICATIONS
SSEBCAGS151TW01 SSEBYAGS151TW01
SSEBCAGS171TW01 SSEBYAGS171TW01 SSEBXAGS171TW01
SSGBCAGS111TW01 SSGBYAGS111TW01 SSGBXAGS111TW01
MODELS
and
ACTIVATION
{NOTE:
Coin Box Sold
Separately}
Coin “C”
Appearance
Color
White
Control Panel Selection
Front
Meter Case
High Capacity
Solid Door (no window)
Yes
Technical Info
Cylinder Volume cu. ft. (liters)
7.0 (198) (ea)
Cycle Temperature - High, Low, Medium, Delicates
Motor (Capacitor Start and Thermal Protected) - 1/3 HP
Elec
265 (120)
Weight - lb (kg)
Gas
275 (125)
Elec
280 (127)
Shipping
Weight - lb (kg)
Gas
290 (132)
Elec
120/240/60/1-30 amp*
Electrical
Requirements (ea)
Gas
120/60/1-15 amp
Prep Card “Y”
Prep Coin “X”
White
Front
-Yes
White
Front
High Capacity
Yes
7.0 (198) (ea)
7.0 (198) (ea)
265 (120)
275 (125)
280 (127)
290 (132)
120/240/60/1-30 amp*
120/60/1-15 amp
265 (120)
275 (125)
280 (127)
290 (132)
120/240/60/1-30 amp*
120/60/1-15 amp
* Electric dryers come equipped
for 120/240/60/1 operation. They
can be field converted to operate on
120/208/60/1 with optional 61928
conversion kit.
** Gas dryers can be field converted
for operation on LP gas with optional
458P3 conversion kit.
For the most accurate information, the
installation guide should be used for all
design and construction purposes. Due
to continuous product improvements,
design and specifications subject to
change without notice. The quality
management system of Alliance
Laundry Systems’ Ripon facility has been
registered to ISO9001:2008.
Overall Dimensions - WxDxH in (mm): 26 7/8 (683) x 29 (737) x 78 3/16 (1986)
4.5 in.
11.4 cm
23.5 in.
59.7 cm
Yes
Yes
cULus
cCSAus
*36.94 in. (93.8 cm)
8 in.
20.3 cm
4 (102) 220 (105)
-5350W, 240V
25,000 Btu
15.5 in. (39.4 cm)
8.875 in.
22.5 cm
*78.17 in. (198.6 cm)
*46.7 in. (118.6 cm)
Type Of Gas (Gas Models Only) ** Factory-Equipped Natural/Mixed Gas
4 (102) Air Outlet Diameter - in (mm)
4 (102) Exhaust Airflow cfm (liters/sec) 220 (105)
220 (105)
4750W, 208V
-Elec
5350W, 240V
5350W, 240V
Heating Element (ea) Gas
25,000 Btu
25,000 Btu
Performance/Features
Cycle Status Indicators
Yes
Yes
Touch Pad Control with Sound Annunciator Yes
Yes
Elec
cULus
cULus
Agency Approval
Gas
cCSAus
cCSAus
4 in.
10.2 cm
28 in.
(71.1 cm)
* With leveling legs turned into base.
NOTE: Exhaust openings are 10.2 cm (4 inch) metal ducting.
26.875 in.
68.3 cm
*15.44 in.
39.2 cm
DRY2536N
© 2013 Alliance Laundry Systems LLC AM14-0328
Speed Queen | 800-345-5649 | www.speedqueen.com/route
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement