Phantom 140 LED Beam

Phantom 140 LED Beam
Phantom 140 LED Beam
ORDERCODE 40194
Highlite International B.V.
Vestastraat 2
6468 EX Kerkrade
The Netherlands
Phone: +31 45-5667700
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Phantom 140 LED Beam brings excitement to any venue. Whether you want simple plug-&play action or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [email protected]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec
Showtec Phantom 140 LED Beam ™ Product Guide
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Return Procedure ..........................................................................................................................................................6
Claims ..............................................................................................................................................................................6
Description of the device .................................................................................................................................................7
Overview ........................................................................................................................................................................7
Backside .........................................................................................................................................................................8
Installation ...........................................................................................................................................................................8
Set Up and Operation .......................................................................................................................................................8
Control Modes ...............................................................................................................................................................9
One Phantom (Built-in Programs) ..........................................................................................................................9
One Phantom (Sound-control) ..............................................................................................................................9
Multiple Phantoms (Master/Slave control) ..........................................................................................................9
Multiple Phantoms (DMX Control) .......................................................................................................................10
Fixture Linking ...............................................................................................................................................................11
Data Cabling ...............................................................................................................................................................11
Control Panel ...............................................................................................................................................................12
Control Mode ..............................................................................................................................................................12
DMX Addressing ..........................................................................................................................................................12
Menu Overview ...........................................................................................................................................................13
Main Menu Options ...............................................................................................................................................14
DMX Addressing .....................................................................................................................................................14
Built-in Programs Mode .........................................................................................................................................15
DMX Advanced/Basic Mode ...............................................................................................................................15
Advanced Mode ...................................................................................................................................................16
Pan movement Mode ...........................................................................................................................................16
Tilt movement Mode..............................................................................................................................................16
Display Mode ..........................................................................................................................................................16
Pan Mode ................................................................................................................................................................16
Tilt Mode ...................................................................................................................................................................16
Audio Sensitivity ......................................................................................................................................................17
Reset .........................................................................................................................................................................17
FactorySet ................................................................................................................................................................17
System Information.................................................................................................................................................17
Password Change ..................................................................................................................................................17
DMX Channels .............................................................................................................................................................18
14 Channels .............................................................................................................................................................18
8 Channels ...............................................................................................................................................................21
Channel settings .........................................................................................................................................................23
Maintenance ....................................................................................................................................................................23
Replacing a Fuse ........................................................................................................................................................24
Static Gobo-wheel, Colorwheel ..............................................................................................................................24
Troubleshooting ...............................................................................................................................................................24
No Light, No Movement - All Products....................................................................................................................24
No Response to DMX..................................................................................................................................................24
Product Specification .....................................................................................................................................................26
1
Warning
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
• Showtec Phantom 140 LED Beam with IEC powercable 0,9m
• 1 bracket for truss mounting
• Safety eye
• User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving your lifespan expectancy is of a higher priority, place care in providing
for lower operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
2
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device.


































Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.
Always hold the fixture at the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only
handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due
to cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Movinghead must be installed out of the reach of children. Never leave the
unit running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Phantom. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !
3
Operating Determinations
• This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
• The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.
• The maximum ambient temperature ta = 45°C must never be exceeded.
• The relative humidity must not exceed 50 % with an ambient temperature of 35° C.
• If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
• Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:





If the projector is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Phantom can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
4
Mounting a clamp to the underside of the Phantom moving head
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
5
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [email protected] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
1) Your name
2) Your address
3) Your phone number
4) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any shortcomings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.
6
Description of the device
Features
The Showtec Phantom 140 LED Beam is a moving-head with high output and great effects.
• Input Voltage: 100-240 VAC, 50/60Hz
• Power consumption: 230W max. at full output
• LED Drive Current: 28A
• DMX-control via standard DMX-controller
• User-selectable Pan ranges, 540° / 360° / 180°, User-selectable Tilt ranges, 270° / 180° / 90°
• Reverse Pan / Tilt movement
• Special: Pan / Tilt / Color wheel / Gobo wheel movement blackout
• Pan 0º -- 540º, Tilt 0º -- 270º
• Pan/Tilt resolution: 16 bit
• Control: Full color display for DMX-512, Master/Slave, Sound-controlled
• 16 Built-in programs selectable by DMX
• Light Source: 1 x 140W LED
• Colourwheel with 14 dichroic-colours and white
• Color functions: Rainbow-flow effect, split colors
• Rotating Gobowheel with 15 static metal gobos, 3 sizes open with Gobo Shake Function (No
replaceable gobos)
• Rotation: Bi-directional
• Gobo functions: Gobo-flow effect, Gobo shake
• Single clamp bracket, which makes it easy to handle and position in truss systems
• Filters: Frost & Color correction
• Electronic Focus
• Prism: Rotating 8-facet
• Output: 41000 Lux @ 5m.
• Beam Angle: 4°
• Dimmer: 0-100%
• Strobe: 0-20Hz
• Housing: Black Metal & Flame-retardant plastic
• Fixture Connection: XLR Data in/out (XLR 3-pin), IEC Power IN/OUT
• Fuse F5A / 250V
• Dimensions: 330 x 245 x 460 mm(WxDxH)
• Weight: 17,28 kg
• User selectable Basic (8CH) or Advanced (14CH) operating modes
Overview
1
Fig. 1
2
1) Lens
2) Menu Buttons + LCD Display
7
Backside
Fig. 2
3 4 5
67
3) Fuse F5A 250V
4) IEC power connector OUT
5) IEC power connector IN
6) DMX signal connector (IN) 3-pin
7) DMX signal connector (OUT) 3-pin
Installation
Remove all packing materials from the Phantom 140 LED Beam. Check that all foam and plastic padding
is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply. The device can be music-controlled by its built-in
microphone.
8
Control Modes
There are 4 modes:
• Stand-alone (built-in programs)
• Sound-controlled
• Master/Slave
• DMX512 (14 Channels ADVANCED or 8 channel BASIC)
One Phantom (Built-in Programs)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. When the Phantom is not connected by a DMX-cable, it functions as a stand-alone device. Please
see page 15 for more information about the built-in programs.
One Phantom (Sound-control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. When the Phantom is not connected by a DMX-cable, it functions as a stand-alone device. Turn on
the music. If the device is set to sound-control, then the Phantom will react to the beat of the music.
Please see page 15 for more information about the sound-control options.
Multiple Phantoms (Master/Slave control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. Use a 3-p XLR cable to connect the Phantom.
The pins:
1.
2.
3.
Earth
Signal Signal +
4. Link the units as shown in (Fig. 3), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on page 15 (Built-in Programs, or Music
control). This means on the master device you can set your desired operation Mode and all slave
devices will react the same as the master device.
Multiple Phantoms (Master/Slave control)
Fig. 3
9
Multiple Phantoms (DMX Control)
1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Always use a safety cable (ordercode 70140 / 70141).
3. Use a 3-p XLR cable to connect the Phantoms and other devices.
4. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
5. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Phantoms DMX Set Up
Note : Link all cables before connecting electric power
Fig. 4
10
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Phantoms on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
• DAP Audio cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p. Ordercode FL01150 (1,5m.), FL013
(3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
• DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m.).
The Phantom 140 LED Beam can be operated with a controller in control mode or without the controller
in stand-alone mode.
11
Control Panel
Fig. 5
A. LCD Display
B. MODE button
C. Up Button
D. Down Button
E. ENTER Button
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Phantom will respond to the controller.
Please note when you use the controller, the unit has 14 channels.
When using multiple Phantoms, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Phantoms should be 1(001); the DMX address of the second
Phantom
should be 1+14=15 (015); the DMX address of the third Phantom should be 15+14=29 (029), etc.
Please, be sure that you don’t have any overlapping channels in order to control each Phantom
correctly.
If two or more Phantoms are addressed similarly, they will work similarly.
For address settings, please refer to the instructions under ”Addressing’.
Controlling:
After having addressed all Phantom fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Phantom will automatically detect whether DMX 512 data is received or
not. If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
If not, the problem may be:
• The XLR cable from the controller is not connected with the input of the Phantom.
• The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
12
Menu Overview
13
Main Menu Options
DMX address
DMX Mode / Built-in Programs / Sound-controlled / Master-Slave Mode
Audio Sensitivity / Pan + Tilt/Reverse Pan + Tilt / Display/Reverse Display/ Pan + Tilt Angle
System Info
DMX Addressing
With this menu you can set the DMX address.
1) Press Mode, until the display shows
.
2) Press Enter to confirm. You can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
.
3) Once you have set the desired DMX address, press the enter button to store your DMX address.
14
Built-in Programs Mode
You can select 4 different Programs when using the Phantom.
1) Press MODE until the display shows
settings.
, then press ENTER to open the menu and change your
2) Use the UP / DOWN buttons to select one of 4 programs.
DMX Advanced/Basic Mode
1) When the display shows :
, press ENTER to open the menu and change your settings.
2) When the display shows :
, the device has 14 Channels.
3) When you press Up/Down, the display will show
. The device now has 8 channels.
Auto Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows :
, press ENTER to open the menu and change your settings.
3) You can choose one of 16 built-in programs by pressing the Up/Down buttons.
Sound-controlled Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows :
, press ENTER.
3) The device is now sound-controlled and will react to the music.
Slave Mode
1) Use the Up/Down buttons to scroll through the Running Mode.
2) When the display shows :
, press ENTER.
3) The device is now a slave device. It will now react the same as its master.
15
Advanced Mode
You can select 8 different Advanced settings when using the Phantom 140 Beam.
1) Press MODE until the display shows
settings.
, then press ENTER to open the menu and change your
2) Use the UP / DOWN buttons to select all 8 settings.
Pan movement Mode
1) When the display shows :
and has been set to OFF, the device is in normal Pan Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Pan function is reversed.
Tilt movement Mode
1) When the display shows :
and has been set to OFF, the device is in normal Tilt Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Tilt function is reversed.
Display Mode
1) When the display shows :
and has been set to OFF, the device is in normal Display
Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Display function is reversed.
Pan Mode
1) When the display shows :
, then press ENTER to open the menu and change your
settings. You are able to set 3 different Pan Angles.
Pan is 540º.
Pan is 360º.
Pan is 180º.
Tilt Mode
1) When the display shows :
, then press ENTER to open the menu and change your
settings. You are able to set 3 different Tilt Angles.
Tilt is 270º.
Tilt is 180º.
Tilt is 090º.
16
Audio Sensitivity
1) When the display shows :
, the device is in Audio Sensitivity Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down, you can set the audio sensitivity from 000 to 100. T
Reset
1) When the display shows :
2) Press ENTER to Reset the device.
, the device is in Reset Mode.
FactorySet
1) When the display shows :
, the device is in Factory Default Mode.
2) Press ENTER to return to its Factory Default Settings.
System Information
You can see the current Running Mode, the DMX Address and the current Software version.
1) Press MODE until the display shows
settings.
, then press ENTER to open the menu and view your
Password Change
This is a Service Function.
1) Press and hold MODE for 3 seconds.
2) The display will show 0000.
3) Press the Up button to change the value. Press the Down button to go to the next digit.
4) Enter password: 2323.
5) A new menu will open and the display shows:
6) You can scroll through the menu with the Up/Down buttons.
7) Press ENTER to open a specific menu and change a certain value.
8) When you press Up/Down, you can set the value of PAN, TILT, GOBO, COLOR, PRISM, FOCUS and
FROST from 000 to 255. You can change the LED value from 000 to 070.
9) Press the ENTER button to store your setting. This option will auto-exit after 10 seconds.
17
DMX Channels
14 Channels
Channel 1 – Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 540° and stopped at any position you wish.
Channel 2 – Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 270° and stopped at any position you wish.
Channel 3 – Pan fine 16 bit
Channel 4 – Tilt fine 16 bit
Channel 5 – PAN/TILT Speed
0-255
From Max Speed (0) to Min. Speed (255)
Channel 6 – Colourwheel
Linear color change following the movement of the slider. Between 128 - 255, the color-wheel rotates
continuously the so-called “Rainbow” effect.
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
56-63
64-67
68-71
72-75
76-79
80-83
84-87
88-91
92-95
96-99
100-103
104-107
108-111
112-115
116-119
120-127
128-191
192-255
Open / White
Yellow
Light Pink
Green
Red
Bright Blue
Light Blue
Dark Yellow
Old Yellow
Light Blue/Violet
Hard Pink
Light Green
Moon Yellow
Steel Blue
UV
Split Color, White + Yellow
Split Color, Yellow + Light Pink
Split Color, Light Pink + Green
Split Color, Green + Red
Split Color, Red + Bright Blue
Split Color, Bright Blue + Light Blue
Split Color, Light Blue + Dark Yellow
Split Color, Dark Yellow + Old Yellow
Split Color, Old Yellow + Light Blue/Violet
Split Color, Light Blue/Violet + Hard Pink
Split Color, Hard Pink + Light Green
Split Color, Light Green + Moon Yellow
Split Color, Moon Yellow + Steel Blue
Split Color, Steel Blue + UV
UV + White
Clockwise rotation (CW) rainbow effect from slow to fast
Counter-clockwise rotation (CCW) rainbow effect from slow to fast
18
Channel 7 – Shutter / Strobe (Dimmer must be open
0-3
4-7
8-76
77-145
146-215
216-255
)
Close
Shutter open
Strobe effect, from slow to fast (0-10 flashes/sec.)
Pulse strobe effect from slow to fast
Random strobe effect, from slow to fast (0-10 flashes/sec.)
Shutter open
Channel 8 – Dimmer intensity
0-255
From black to brightest
Channel 9 – Static Gobo-wheel + Gobo Shake
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
56-59
60-63
64-67
68-71
72-77
78-83
84-89
90-95
96-101
102-107
108-113
114-119
120-125
126-131
132-137
138-143
144-149
150-155
156-161
162-167
168-173
174-179
180-217
218-255
Open / White
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9
Gobo 10
Gobo 11
Gobo 12
Gobo 13
Gobo 14
Gobo 15
Gobo 16
Gobo 17
Gobo Shake 17 from slow to fast
Gobo Shake 16 from slow to fast
Gobo Shake 15 from slow to fast
Gobo Shake 14 from slow to fast
Gobo Shake 13 from slow to fast
Gobo Shake 12 from slow to fast
Gobo Shake 11 from slow to fast
Gobo Shake 10 from slow to fast
Gobo Shake 9 from slow to fast
Gobo Shake 8 from slow to fast
Gobo Shake 7 from slow to fast
Gobo Shake 6 from slow to fast
Gobo Shake 5 from slow to fast
Gobo Shake 4 from slow to fast
Gobo Shake 3 from slow to fast
Gobo Shake 2 from slow to fast
Gobo Shake 1 from slow to fast
Open / White
Clockwise rotation (CW) rainbow effect from slow to fast
Counter-clockwise rotation (CCW) rainbow effect from slow to fast
Channel 10 – Channel Functions
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-87
88-95
No Function
Blackout during Pan/Tilt movement
Blackout during Colorwheel movement
Blackout during Gobowheel movement
Blackout during Pan/Tilt/Colorwheel movement
Blackout during Pan/Tilt/Gobowheel movement
Blackout during Pan/Tilt/Gobowheel /Colorwheel movement
No Function
No Function
19
96-103
104-111
112-119
120-127
128-135
136-143
144-151
152-159
160-167
168-255
Reset Pan after 5 seconds
Reset Tilt after 5 seconds
Reset Color wheel after 5 seconds
Reset Gobo wheel after 5 seconds
No Function
Reset Prism after 5 seconds
Reset Focus after 5 seconds
Reset all Channels after 5 seconds
No Function
No Function
Channel 11 – Built-in Programs + Sound-controlled Program
0-7
8-23
24-39
40-55
56-71
72-87
88-103
104-119
120-135
136-151
152-167
168-183
184-199
200-215
216-231
232-247
248-255
No Function
Built-in Program 1
Built-in Program 2
Built-in Program 3
Built-in Program 4
Built-in Program 5
Built-in Program 6
Built-in Program 7
Built-in Program 8
Sound control 1
Sound control 2
Sound control 3
Sound control 4
Sound control 5
Sound control 6
Sound control 7
Sound control 8
Channel 12 – Prism
0-7
8-12
13-130
131-247
248-255
Open
8-facet Prism Effect, no rotation
Clockwise rotation (CW) prism effect from slow to fast
Counter-clockwise rotation (CCW) prism effect from slow to fast
8-facet Prism Effect, no rotation
Channel 13 – Focus
0-255
0-255 Continuous adjustment from far to near
Channel 14 – Frost Effect
0-255
Frost effect
20
8 Channels
Channel 1 – Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 540° and stopped at any position you wish.
Channel 2 – Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 270° and stopped at any position you wish.
Channel 3 – Colourwheel
Linear color change following the movement of the slider. Between 128 - 255, the color-wheel rotates
continuously the so-called “Rainbow” effect.
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
56-63
64-67
68-71
72-75
76-79
80-83
84-87
88-91
92-95
96-99
100-103
104-107
108-111
112-115
116-119
120-127
128-191
192-255
Open / White
Yellow
Light Pink
Green
Red
Bright Blue
Light Blue
Dark Yellow
Old Yellow
Light Blue/Violet
Hard Pink
Light Green
Moon Yellow
Steel Blue
UV
Split Color, White + Yellow
Split Color, Yellow + Light Pink
Split Color, Light Pink + Green
Split Color, Green + Red
Split Color, Red + Bright Blue
Split Color, Bright Blue + Light Blue
Split Color, Light Blue + Dark Yellow
Split Color, Dark Yellow + Old Yellow
Split Color, Old Yellow + Light Blue/Violet
Split Color, Light Blue/Violet + Hard Pink
Split Color, Hard Pink + Light Green
Split Color, Light Green + Moon Yellow
Split Color, Moon Yellow + Steel Blue
Split Color, Steel Blue + UV
UV + White
Clockwise rotation (CW) rainbow effect from slow to fast
Counter-clockwise rotation (CCW) rainbow effect from slow to fast
Channel 4 – Shutter / Strobe
0-3
4-7
8-76
77-145
146-215
216-255
Close
Shutter open
Strobe effect, from slow to fast (0-10 flashes/sec.)
Pulse strobe effect from slow to fast
Random strobe effect, from slow to fast (0-10 flashes/sec.)
Shutter open
21
Channel 5 – Static Gobo-wheel + Gobo Shake
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
56-59
60-63
64-67
68-71
72-77
78-83
84-89
90-95
96-101
102-107
108-113
114-119
120-125
126-131
132-137
138-143
144-149
150-155
156-161
162-167
168-173
174-179
180-217
218-255
Open / White
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Gobo 8
Gobo 9
Gobo 10
Gobo 11
Gobo 12
Gobo 13
Gobo 14
Gobo 15
Gobo 16
Gobo 17
Gobo Shake 17 from slow to fast
Gobo Shake 16 from slow to fast
Gobo Shake 15 from slow to fast
Gobo Shake 14 from slow to fast
Gobo Shake 13 from slow to fast
Gobo Shake 12 from slow to fast
Gobo Shake 11 from slow to fast
Gobo Shake 10 from slow to fast
Gobo Shake 9 from slow to fast
Gobo Shake 8 from slow to fast
Gobo Shake 7 from slow to fast
Gobo Shake 6 from slow to fast
Gobo Shake 5 from slow to fast
Gobo Shake 4 from slow to fast
Gobo Shake 3 from slow to fast
Gobo Shake 2 from slow to fast
Gobo Shake 1 from slow to fast
Open / White
Clockwise rotation (CW) rainbow effect from slow to fast
Counter-clockwise rotation (CCW) rainbow effect from slow to fast
Channel 6 – Prism
0-7
8-12
13-130
131-247
248-255
Open
8-facet Prism Effect, no rotation
Clockwise rotation (CW) prism effect from slow to fast
Counter-clockwise rotation (CCW) prism effect from slow to fast
8-facet Prism Effect, no rotation
Channel 7 – Focus
0-255
0-255 Continuous adjustment from far to near
Channel 8 – Frost Effect
0-255
Frost effect
22
Channel settings
Fig. 6
Maintenance
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
4. The electric power supply cables must not show any damages or material fatigue.
The Showtec Phantom 140 LED Beam requires almost no maintenance. However, you should keep the
unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power
supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass
cleaner and a soft cloth. Do not use alcohol or solvents. The front lens will require weekly cleaning, as
smoke-fluid tends to build up residues, reducing the light-output very quickly.
The cooling-fans, colour-wheel, the gobowheel, the gobos and the internal lenses should be cleaned
monthly with a soft brush.
Please clean internal components once a year with a light brush and vacuum cleaner.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
23
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the
fuse burns out, the product will not function whatsoever. If this happens, follow the directions below to do
so.
1. Unplug the unit from electric power source.
2. Insert a screwdriver into the slot in the fuse cover. Gently pry up the fuse cover. The fuse will come out.
3. Remove the used fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
Static Gobo-wheel
18
1
Colorwheel
2
17
3
16
4
15
5
14
6
13
7
12
8
11
10
9
Fig. 7
Fig. 8
Troubleshooting
No Light, No Movement - All Products
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.
1. Power supply. Check that the unit is plugged into an appropriate power supply.
2. The LEDs. Return the Phantom 140 LED Beam to your Showtec dealer.
3. The fuse. Replace the fuse. See page 25 for replacing the fuse.
No Response to DMX
Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card
malfunction.
1. Check the DMX setting. Make sure that DMX addresses are correct.
2. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.
Try your DMX control again.
3. Determine whether the controller or light effect is at fault. Does the controller operate properly with
other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light
effect to a qualified technician.
24
Problem
One or more
fixtures are
completely dead.
Fixtures reset
correctly, but all
respond
erratically or not
at all to the
controller.
Probable cause(s)
No power to the fixture
Remedy
• Check that power is switched on
and cables are plugged in.
Primary fuse blown.
• Replace fuse.
The controller is not connected.
3-pin XLR Out of the controller
does not match XLR Out of the first
fixture on the link (i.e. signal is
reversed).
• Connect controller.
• Install a phase reversing cable
between the controller and the first
fixture on the link.
• Check data quality. If much lower
than 100 percent, the problem may
be a bad data link connection, poor
quality or broken cables, missing
termination plug, or a defective
fixture disturbing the link.
Poor data quality
Bad data link connection
Fixtures reset
correctly, but
some respond
erratically or not
at all to the
controller.
Data link not terminated with 120
Ohm termination plug.
Incorrect addressing of the fixtures.
One of the fixtures is defective and
disturbs data transmission on the
link.
3-pin XLR Out on the fixtures does
not match (pins 2 and 3 reversed).
Shutter closes
suddenly
No light or lamp
cuts out
intermittently
The color wheel, gobowheel or a
gobo has lost its index position and
the fixture is resetting the effect.
Fixture is too hot.
LEDs damaged
The power supply settings do not
match local AC voltage and
frequency.
25
• Inspect connections and cables.
Correct poor connections. Repair or
replace damaged cables.
• Insert termination plug in output jack
of the last fixture on the link.
• Check address setting.
• Bypass one fixture at a time until
normal operation is regained: unplug
both connectors and connect them
directly together.
• Have the defective fixture serviced
by a qualified technician.
• Install a phase-reversing cable
between the fixtures or swap pin 2
and 3 in the fixture, that behaves
erratically.
• Contact a technician for servicing
the problem persists.
• Allow fixture to cool.
• Clean fan.
• Make sure air vents at control panel
and front lens are not blocked.
• Turn up the air conditioning .
• Disconnect fixture and return to your
dealer.
• Disconnect fixture. Check settings
and correct if necessary.
Product Specification
Model: Showtec Phantom 140 LED Beam
Input Voltage: 100-240 VAC, 50/60Hz
Power consumption: 230W max. at full output
Fuse F5A / 250V
Dimensions: 330 x 245 x 460 mm(WxDxH)
Weight: 17,28 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
Pan/Tilt resolution: 8-16 bit
DMX Channels: 14 or 8
Signal input 3-pin XLR male
Signal output 3 -pin XLR female
Electro-mechanical effects
DMX-control via standard DMX-controller
User-selectable Pan ranges, 540° / 360° / 180°
User-selectable Tilt ranges, 270° / 180° / 90°
Reverse Pan / Tilt movement
Special: Pan / Tilt movement blackout
Pan 0º -- 540º
Tilt 0º -- 270º
Pan/Tilt resolution: 16 bit
Control: DMX-512, Master/Slave, Sound-controlled
16 Built-in programs selectable by DMX
Light Source: 1 x 140W LED
Colourwheel with 14 dichroic-colours and white
Color functions: Rainbow-flow effect, split colors
Rotation: Bi-directional
Gobo functions: Gobo-flow effect, Gobo shake
Filters: Frost & Color correction
Rotating Gobowheel with 15 static metal gobos, 3 sizes open with Gobo Shake Function (No replaceable
gobos)
Single clamp bracket, which makes it easy to handle and position in truss systems.
Electronic Focus
Prism: Rotating 8-facet
Output: 41000 Lux @ 5m.
Beam Angle: 4°
LED Drive Current: 28A
Dimmer: 0-100%
Strobe: 0-20Hz
Housing: Black Metal & Flame-retardant plastic
User selectable Basic (8CH) or Advanced (14CH) operating modes
Gobos
Colourwheel: heat-resistant and intensify glass; dichroic glas coating
Max. ambient temperature ta: 40°C; Max. housing temperature tB: 80°C
Cooling: 2 axial fans – 1 fan in the projector and 1 in the base
Motor: high quality stepping-motor controlled by microprocessors
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
Design and product specifications are subject to change without prior notice.
Website: www.Showtec.info
Email: [email protected]
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement