Superior Z200 User's manual
Contents Sony Ericsson Z200 Getting started .............................................. 3 Using WAP................................................... 48 SIM card, battery, making a call WAP browser, bookmarks Getting to know your phone ........................ 6 More features .............................................. 51 Key functions, quick keys, entering letters Alarm clock, stopwatch, calculator, calendar, games Personalizing your phone.......................... 15 Security........................................................ 54 Choosing ring signal, theme and other settings SIM card lock, phone lock Calling.......................................................... 22 Troubleshooting.......................................... 56 Using the phonebook, call options Why doesn’t the phone work the way I want? Setting up WAP ........................................... 37 Additional information................................ 59 WAP browser Safe and efficient use, warranty, declaration of conformity Messaging ................................................... 42 Text messaging Icons............................................................. 67 What do the icons mean? Index............................................................. 70 1 This is the Internet version of the user's guide. © Print only for private use. Sony Ericsson GSM 900/1800/1900 Forth edition (March 2004) This user guide is published by Sony Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this user guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this user guide. All rights reserved. © Sony Ericsson Mobile Communications AB, 2003 Publication number: AE/LZT 108 6475 R4A. Please note: Some of the services in this user guide are not supported by all networks. This also applies to the GSM International Emergency Number 112. Please read the Guidelines for safe and efficient use and the Limited warranty chapters before you use your mobile phone. T9™ Text Input is a trademark or a registered trademark of Tegic Communications. T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057, United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide. Other product and company names may be the trademarks of their respective owners. Any rights not expressly granted herein are reserved. Please contact your network operator or service provider if you are in doubt as to whether you can use a particular service or not. 2 This is the Internet version of the user's guide. © Print only for private use. Getting started SIM card, battery, making a call About this user’s guide For ease of reference, the “Getting to know your phone” chapter gives a quick overview of the main functions of the phone, shortcuts and general information. More information and downloads are available at www.SonyEricsson.com or wap.SonyEricsson.com. Available services Some services and functions described in this user’s guide are network- or subscription-dependent. Because of this, all menus may not be available in your phone. This symbol indicates that a service or function is network- or subscriptiondependent. Please consult your network operator for more information about your subscription. The SIM card When you register as a subscriber with a network operator, you get a SIM (Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your phonebook information, among other things. Tip: Verify that your information is saved to the SIM card before you remove it from another phone. For example, phonebook entries may be saved in the phone memory. Assembly Before you can use your phone you need to: • Insert the SIM card. • Attach and charge the battery. Getting started This is the Internet version of the user's guide. © Print only for private use. 3 SIM card and battery information Always turn off the phone and detach the charger before you insert or remove a SIM card. ≈ 30 min. ≈ 4 h. To insert the SIM card and charge the battery 1. Insert the SIM card. Make sure the SIM card is placed under the silvery holders. 2. Place the battery on the back of the phone with the connectors facing each other, and push until you hear a click. 3. Place the back cover into the slots on the phone and push until you hear a click. 4. Connect the charger to the phone at the flash symbol with the symbol on the charger plug facing upwards. 5. It may take up to 30 minutes before the battery charging icon appears in the display. 6. Wait approximately 4 hours or until the icon indicates that the battery is fully charged. If you do not see the battery icon after this time, press any key to activate the display. 7. Remove the charger by tilting the plug upwards. Turning on the phone and making calls Your PIN (Personal Identity Number) is provided by your network operator but not all operators require a PIN to activate services. If your PIN starts with the same digits as an emergency number, for example 112, the digits are not hidden with an * when you enter them. 4 Getting started This is the Internet version of the user's guide. © Print only for private use. This is so that you can see and call an emergency number without entering a PIN. See “Emergency calls” on page 23 for more information. If you make a mistake while entering your PIN, delete the number by pressing . Note: If you enter the wrong PIN three times in a row, the SIM card is blocked and the message PIN blocked appears. To unblock it, you need to enter your PUK (Personal Unblocking Key). Your PUK is provided by your network operator. To turn on thephone 1. Open the phone. Press and hold . 2. Enter your PIN, if you have one for your SIM card. To make and receive calls • Enter the area code and phone number, and press YES to make the call. • Press NO or close the phone to end the call. • When the phone rings, press YES or open the phone to answer the call. See “Phone functions” on page 20. Navigating the menus The main menus are shown as icons on the desktop. To go to the desktop, press the center of the navigation key. (See “Key functions – phone open” on page 7.) Press left, right, up, or down to move through menus. Press the navigation key to select highlighted items. Getting started This is the Internet version of the user's guide. © Print only for private use. 5 Getting to know your phone Key functions, quick keys, entering letters Key functions – phone closed Volume keys Increase or decrease the speaker volume during a call. Enter the status menu in standby. Press twice to reject an incoming call. Press once to turn off the ring signal when receiving a call. Battery status A red light indicates charging or low battery. External Shows, for example, display the time, battery status, network strength, profile, signal off, incoming call, missed call, new text message. Infrared Exchange data via the IR port. 6 Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. Key functions – phone open 1 1 2 3 4 2 5 9 3 4 5 10 6 7 8 9 6 7 8 11 12 10 11 12 Speaker. Main display. Make and answer calls. Select a menu, submenu or an option. Navigation key. Press to enter the desktop menus. Press up, down, left, right to move through menus, lists and texts. Press the navigation key as an alternative to . Press for options or help. Press and hold for WAP. Enter digits, 0-9, and letters. Enter *. Shift between lower or upper case. Microphone. Press to end or reject a call, go back one level in the menus, or leave an option unchanged. Press and hold to go back to standby mode from menus. Delete numbers, letters or an item from a list. Enter # or a space. Press and hold to turn the phone on or off. Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. 7 Quick keys Useful key combinations (using shortcuts) are described below. When in standby: press the position number and press any of the number keys – and YES press a volume key once. To... When in standby: reach a phone number at a specific position speed dial make an emergency call enter the international emergency number and press YES press the navigation key or press enter the Status menu to see today’s date, the profile in use and the model name of the phone change the language to Automatic press 8888 press 0000 enter the menus enter the first submenu in My Shortcuts enter Find and Call or enter Call List call your voicemail enter the + sign turn off the ring signal when receiving a call press YES press and hold press and hold press , or a volume key once change the language to English press reject a call quickly press a volume key twice when receiving a call or press NO set the phone to silent, options press and hold or press , YES To... In standby when phone is closed: change information in external display press a volume key once reach a phonebook entry press and hold any of the beginning with a specific keys – letter 8 To... Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. To... During a call: To... put a call on hold retrieve a call press YES press YES again When entering letters using multitap text input: enter a space press To... When in the menus: To... move through menus or lists enter a quick options menu or help, if available delete an item go back to standby use the navigation key or press a volume key press When entering letters using T9™ Text Input: view alternative words accept a word and add a space enter a period view alternative punctuation marks press press press when in lists press and hold NO To... When entering letters: shift between upper- and lower-case letters enter numbers press select multitap or T9 Text input methods select input languages and other character or numeric input methods press and hold , then the letter press and hold any of the number keys delete letters and numbers press press and hold or press press , then repeatedly or Using shortcuts A quicker way to move through the menus is to use shortcuts. Enter the menus by pressing and then simply press the navigation key to enter the menu. To get back to standby, press and hold NO. You can quickly and easily reach the settings you use most by placing them in the menu My Shortcuts. See “My shortcuts” on page 20. Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. 9 Delete, edit and rename If you add items, for example, a phonebook entry, a calendar item or a WAP bookmark, it can be deleted, edited or renamed. Note: This menu only appears if your SIM card supports this service. Some operators may not use the name “Online services”. Your phone may not support all of the services offered. To delete an item • Select an item and press . • Select an item, press , select Delete or Delete All. To enter your new menu system Scroll to Connect, YES, Online Services, YES. To edit items Select an item, press , select Edit. Online services Online services are customized services offered by network operators, independently of mobile phones and mobile phone manufacturers. A SIM card which supports online services works in the same way as a normal SIM card. When you have inserted your SIM card and turned on your phone, your network operator can download data to your SIM card. When you restart your phone after the first data download, a new submenu appears under the Connect menu. 10 Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. Menu overview Calls WAP Services My Shortcuts Fun & Games Messages Missed Calls Call List Manage Calls Time & Cost Next Call Options Sony Ericsson Bookmarks Push Inbox Enter Address Resume Select Profile Advanced Options Write New Ring Volume Select Profile My Numbers Edit Shortcuts Games My Pictures My Sounds Themes Composer Operator link* Write New Inbox Call Voicemail Unsent Templates Sent Items Options Area Info. SMS Memory *Please note that some menus are operator-, network- and subscriptiondependent. Organizer Connect Phonebook Settings Ongoing Call* Calendar Alarms Timer Stopwatch Calculator Online Services* Infrared Port GSM Networks Data Comm. Find and Call Add Number Find and Edit Picture Personal Rings Groups Email Addresses Options Memory Status Special Numbers Sounds & Alerts Profiles Display Language Time and Date Locks Handsfree Flip functions Master Reset Turn Off Tones** Hold Call** Switch Calls** Release Active Call** Retrieve Call** Join Calls** Transfer Call** Extract Part** Release All Calls** Release Party** Parties in Conf.** Calls** **Only available during a call or conference call. Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. 11 Entering letters and characters You can enter letters, for example, when you add names to the phonebook, write text messages or enter WAP addresses. Apart from the way you normally enter letters in your phone, using multitap input, you can use T9™ Text Input for entering text messages if the input language you select supports this. T9 Text Input is a predictive input method and is a quicker way to write texts. Input languages Before you start entering letters, you need to select the input languages that you want to use when writing. To select input languages 1. Scroll to Settings, YES, Language, YES, Input, YES. 2. Scroll to the language or alphabet that you want to use for entering letters and press for each language you want. 3. Press YES to exit the menu. When writing, you can switch to one of your selected input languages by pressing and then selecting Language. See “The list of options” on page 14. 12 Multitap text input When saving names in the phonebook or when writing WAP addresses, you enter letters using multitap text input. You press each key as many times as needed to show the letter you want. The following example shows how to write a name in the phonebook. To enter letters using multitap text input 1. Scroll to Phonebook, YES, Add Number, YES, Add New, YES. 2. Add the number, YES. 3. Press the appropriate key, – , or , repeatedly until the character you want appears in the display, e.g., to enter an A, press once, to enter a B, quickly press twice, to shift between upper- and lower-case letters, press , then enter the letter. See the Latin alphabet, abc, table below: Press… to see/enter… .,-?!'@:;/()1 ABCÅÄÆàÇ2Γ Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. Press… – to see/enter… DEFèÉ3∆Φ GHIì4 JKL5Λ MNOÑÖØò6 PQRSß7ΠΣ TUVÜù8 WXYZ9 +0ΘΞΨΩ Space # * ↵ ¶ to delete letters and numbers to shift between upper- and lowercase letters press and hold to enter numbers T9™ Text Input You can use T9™ Text Input when writing text messages. The T9™ Text Input method uses a builtin dictionary to recognize the most commonly used words for each sequence of key presses. This way, you press each key only once, even if the letter you want is not the first letter on the key. Note: A language must be selected in order to use the T9™ Text Input method. If you change input method in Settings/Language/T9 Input, this is valid for all input of texts, not only for the text you are currently writing. The following shows how to start writing a text message. Tip: Press to enter a period. To enter other punctuation marks, press and then or repeatedly. Press to accept and add a space. Press and hold to select an input method for the text you are currently writing. To enter letters using T9™ Text Input 1. Scroll to Messages, YES, Text, YES, Write New, YES. 2. For example, if you want to write “Jane”, press , , , . A list of alternative words or candidates are shown. If the candidates do not include a word you want, you can add a new word to the list whilst selecting. 3. Scroll to select Jane. 4. When the word is highlighted, press YES to accept without a space, or press to accept and add a space. Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. 13 To add a word to candidates 1. Scroll to a candidate similar to the word you want to add, press , select Edit Word, YES. 2. Press repeatedly to delete one letter at a time. Write the new word using multitap text input, YES. The word is added to the dictionary. The next time you enter the word you just added to the dictionary, it appears as one of the alternative words. 3. Continue writing your message. See also “Text messages (SMS)” on page 43. The list of options Press when writing to enter a list of options. The list may contain some or all of the following options: • Add Symbol – Symbols and punctuation marks such as ? and , are shown. Move between the symbols by using the navigation key. • Insert Item – Add a picture, sound effect, melody or animation to a message. • Edit Word – For T9™ Text Input only. Edit the suggested word by using multitap text input. • Text Format – Edit size, style, alignment or start a new paragraph. 14 • Language – Select an input language. • Input Method – A list of input methods available for the current input language is shown. • Candidates – For T9™ Text Input only. Turn on or off the alternative words list. • National Char. – Turn off language-specific characters to save space. This option only appears for some input languages. • Help. To turn T9™ Text Input on or off Scroll to Settings, YES, Language, YES, T9 Input, YES or press and hold when writing. Getting to know your phone This is the Internet version of the user's guide. © Print only for private use. Personalizing your phone Choosing ring signal, theme and other settings Themes You can change the appearance of the display, for example, the colors and wallpaper, by using themes. Your phone comes with a number of preset themes. To select a theme Scroll to Fun & Games, YES, Themes, YES. To adjust the display contrast Scroll to Settings, YES, Display, YES, Contrast, YES. Pictures Your phone comes with a number of pictures. All pictures are saved in Fun & Games/My Pictures. You can: • Set a picture as a wallpaper when in standby mode. • Assign a picture to an entry in the phonebook. When that person calls, the picture appears in the display (provided your subscription supports the Caller-ID service). See “To add a picture to a phonebook entry” on page 26. • Enclose a black and white picture in a text message. • Send a picture via IR. • Download a picture via WAP. Handling pictures You can also add, delete or rename pictures in My Pictures. The number of pictures that can be saved depends on the size of the pictures. File types supported are GIF, JPEG and WBMP. Tip: When viewing your pictures in Fun & Games/ My Pictures, you can set a wallpaper by pressing . To view your pictures Scroll to Fun & Games, YES, My Pictures, YES. The pictures are shown in thumbnail view. To get a full view, press YES. Animations can only be viewed when inserting an item in a text message. See “To insert an item in a text message” on page 43. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. 15 To select a picture as wallpaper 1. Scroll to Settings, YES, Display, YES, Wallpaper, YES, Select Picture, YES. 2. Select a picture, YES. To receive a picture via Infrared 1. From standby, press , scroll to Activate IR, YES. 2. When you receive the picture, press YES to save it in My Pictures. To turn the wallpaper on or off Scroll to Settings, YES, Display, YES, Wallpaper, YES, Activate, YES. To receive a picture via a message When you receive a picture via a message, a new message appears in your Inbox. Highlight the picture in the message by using the navigation key to select it, press and select Save to save it in My Pictures. Exchanging pictures You can send and receive pictures via IR and in text messages. For more information on sending pictures in messages, see “Messaging” on page 42. Note: You are not allowed to exchange copyrightprotected material. 1. 2. 3. 4. 16 To send a picture Scroll to Fun & Games, YES, My Pictures, YES. Select a picture, YES. Press . Select Send, YES. Select a transfer method, YES. Ring signals and melodies Your phone comes with a number of standard and polyphonic melodies which can be used as ring signals. See “Icons” on page 67 for more information. You can create and edit melodies, and send them to a friend, in a text message. You can also exchange melodies via IR or download new via WAP. Note: You are not allowed to exchange copyrightprotected material. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. Managing ring signals and melodies Exposure to a loud ring volume may damage hearing. Answer the call or lower the volume before placing the phone to your ear. To select a ring signal Scroll to Settings, YES, Sounds & Alerts, YES, Ring Sounds, YES. To set the ring signal volume 1. Scroll to Settings, YES, Sounds & Alerts, YES, Ring Volume, YES. 2. Press or to decrease or increase the volume. 3. Press YES to save the setting. • • • • to raise the note one octave. once to raise the note one semitone. twice to lower the note one semitone. to remove notes. To compose a ring signal 1. Scroll to Fun & Games, YES, Composer, YES. 2. Compose your ring signal using the options described above. 3. To listen to your ring signal, press YES. 4. Press YES again to save and name it, or press NO to continue composing. Exchanging ring signals and melodies You can send and receive a sound, ring signal or melody via IR, text messages, or download it via WAP. To send a ring signal or melody in a text message, see “To insert an item in a text message” on page 43. To turn the ring signal on or off Press or press and hold from standby and select Turn On Silent or Turn Off Silent. All signals except the alarm signal are turned off. Note: You cannot exchange a polyphonic melody via text messages. To compose your own ring signal You can compose up to ten personal ring signals. Options available when composing a ring signal are: • Press a key to enter a note. Press and hold the key to make it a long note. Press Press Press Press 1. 2. 3. 4. To send a melody Scroll to Fun & Games, YES, My Sounds, YES. Select a melody and press . Select Send, YES. Select a transfer method. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. 17 To receive a sound or melody via Infrared 1. From standby, press , scroll to Activate IR, YES. 2. When you receive the sound or melody, press YES to save it in My Sounds. Increasing Ring You can choose a ring signal that rises in steps from the lowest volume to the highest, or you can choose a ring signal with constant volume. To turn increasing ring On or Off Scroll to Settings, YES, Sounds & Alerts, YES, Increasing Ring, YES. Sounds & Alerts You can choose to be notified of an incoming call by the buzzing of the vibrating alert. You can set the phone’s vibrating alert to On, On If Silent or Off. From Settings/Sounds & Alerts, you can also select: • Message Alert when messages are received. • Key Sound when using the keypad. • Minute Minder to beep after every minute during calls. 18 To set the vibrating alert 1. Scroll to Settings, YES, Sounds & Alerts, YES, Vibrating Alert, YES. 2. Select the setting you want, YES. Menu language Most SIM cards automatically set the menu language to the language of the country where you bought your SIM card. If this is not the case, the preset language is English. Note: You can always choose Automatic by pressing 8888 in standby. You can always choose English by pressing 0000 in standby. To change the menu language 1. Scroll to Settings, YES, Language, YES, Menus, YES. 2. Select a language, YES. Display light The display light can be set to Automatic, Off or On. In automatic mode, the display light is turned off a few seconds after you press the last key. Note: If set to On, the display light consumes extra battery power and reduces standby time. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. To set the display light Scroll to Settings, YES, Display, YES, Light, YES. To set the display contrast Scroll to Settings, YES, Display, YES, Contrast, YES. Time settings The time is displayed in the external display when the phone is closed. You can also see the time in the main display in standby. The time can be displayed in a 12-hour or a 24-hour clock. Note: If you select the 12-hour clock, you can alternate between am and pm by pressing when setting the time. To set the time Scroll to Settings, YES, Time and Date, YES, Set Time, YES. To set the time format Scroll to Settings, YES, Time and Date, YES, Time Format, YES. Date When the phone is in standby, you can always see today’s date in the main display or you can press one of the volume keys to see the date in the status menu. To return to standby, wait a few seconds. To set the date Scroll to Settings, YES, Time and Date, YES, Set Date, YES. To set the date format Scroll to Settings, YES, Time and Date, YES, Date Format, YES. Advanced time settings Under Advanced in the Settings/ Time and Date menu, you can set time zone and daylight saving time. Modyfying these settings changes the time accordingly if your network operator supports this service. When your phone changes network and the time sent out from the network operator deviates from the time in your phone, you are asked whether you want to update the time if you have turned on Auto Time Zone. If you press YES, the time is updated automatically. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. 19 Note: Contact your network operator for more information. Answering mode When using a portable handsfree kit, you can choose to answer a call by opening the phone, pressing any key (except the NO key), or setting the phone to answer the call automatically. To select answering mode Scroll to Settings, YES, Handsfree, YES, Answering Mode, YES. Phone functions You can answer a call by opening the phone. To set the phone functions 1. Scroll to Settings, YES, Flip functions, YES. 2. Select Answer call or Off. My phone numbers You can check your own phone number(s). To check your phone number Scroll to Phonebook, YES, Special Numbers, YES, My Numbers, YES. If your number is not saved on your SIM card, you can enter it yourself. 20 My shortcuts You can place your favorite functions that you want to reach quickly and easily in the My Shortcuts menu. To reach a shortcut from standby Press to enter the first shortcut in My Shortcuts. To add a function to my shortcuts 1. Scroll to My Shortcuts, YES, Edit Shortcuts, YES. 2. Select a function from the list by pressing . 3. Enter the position number you want for this function in your menu and press YES. 4. Press YES to save and exit the list. Profiles Your phone has a number of preset profiles which are set to suit a certain environment. You can rename, change, or add accessories to the profiles. For example, when you go to a meeting you can simply choose the Meeting profile and a number of settings are changed, such as the ring signal is turned off. You can reset all profile settings to the default or the way they were set when you bought your phone: for example Normal. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. Master reset You can reset all the settings in the phone to the way they were when you bought your phone by selecting Reset Settings. If you also want to delete all phonebook entries, messages and other personal data, select Reset All instead. Accessories may change the selected profile in your phone automatically. For example, when using a portable handsfree the profile switches from Normal to Port H-free. The profile should automatically change back when the accessory is disconnected. To select a profile Scroll to Settings, YES, Profiles, YES, Select Profile, YES. To change a profile setting 1. Scroll to Settings, YES, Profiles, YES, Edit Profile, YES. 2. Select a setting, YES. 3. Change the profile settings and press YES to confirm. To rename a profile Scroll to Settings, YES, Profiles, YES, Edit Profile, YES, Profile name:, YES. To reset all profiles Scroll to Settings, YES, Profiles, YES, Reset Profiles, YES. Note: If you select Reset All, content such as melodies and pictures that you have downloaded, received or edited is also deleted. 1. 2. 3. 4. To reset the phone Scroll to Settings, YES, Master Reset, YES. Select Reset Settings or Reset All, YES. Press YES to continue. Enter the phone lock code (0000 or the new code if you have changed it) and press YES. The infrared (IR) port The infrared port can be used to transfer and exchange information with another device equipped with an infrared port. See “Getting to know your phone” on page 6 to locate the infrared port. When used with certain functions, such as sending a picture, IR is automatically activated for a shot while. Personalizing your phone This is the Internet version of the user's guide. © Print only for private use. 21 Note: Infrared ports must be facing each other at a distance of 20 to 30 cm (7.9 to 11.8 Inches) when used. Calling The infrared port can be activated in the following ways: • Press from standby, scroll to Activate IR, YES. • Scroll to Connect, YES, Infrared Port, YES, select an option, YES. • When selecting a transfer method, for example, for sending a picture. Making calls Before you can make or receive any calls, you must turn on the phone and be within range of a network. See “SIM card and battery information” on page 4. To turn infrared off Scroll to Connect, YES, Infrared Port, YES, Off, YES. Using the phonebook, call options Tip: You can call numbers from the call list and the phonebook. See “Call list” on page 25 and “Phonebook” on page 25. To make a call 1. Enter the area code and the phone number, and press YES to make the call. 2. Press NO or close the phone to end the call. See “Phone functions” on page 20. During calls You can increase or decrease the speaker volume during a call. The microphone must be turned on to change the speaker volume during a call. 22 Calling This is the Internet version of the user's guide. © Print only for private use. To change the speaker volume Press the volume keys to change the speaker volume. To turn off the microphone during a call 1. Press and hold until the display shows Muted. 2. Press again to resume the conversation. Automatic redialing Automatic redialing is available for all calls except data calls. Note: Do not hold the phone to your ear while waiting. When the call is connected, the phone gives a loud signal. The phone re-dials the number up to ten times or until: • the call is connected • you receive a call • you press a key. To re-dial a number If the connection of the call failed and the display shows Retry?, press YES. International calls It is useful to enter the + sign and country code for all numbers in the phonebook as they can then be easily used whether home or abroad. To make international calls 1. Press and hold until a + sign appears in the display. The + replaces the international prefix number of the country from which you are calling. 2. Enter the country code, area code (without the leading zero) and phone number, YES. Emergency calls Your phone supports international emergency numbers such as 112, 911, and 08. This means that these numbers can normally be used to make an emergency call in any country, with or without a SIM card inserted, if a GSM network is within range. Note: Some network operators may require that a SIM card be inserted, or in some cases, that a correct PIN be entered, in order to make an emergency call. Calling This is the Internet version of the user's guide. © Print only for private use. 23 In some countries, other emergency numbers may also be promoted. Your operator may therefore have saved additional local emergency numbers on the SIM card. To make an emergency call Enter, for example, 112 (the international emergency number), YES. To view your local emergency numbers Scroll to Phonebook, YES, Special Numbers, YES, Emergency Nos., YES. Receiving calls If your subscription includes the Caller ID service and the caller’s number is identified, the number appears in the external display when the phone is closed. If you have saved the number in your phonebook, the name and number appear. If the number is a restricted number, Withheld appears. Answer or reject calls If you receive a call when the phone is closed, the phone rings and a phone icon appears in the external display. If the phone is open, Answer? appears in the main display. 24 To answer a call • Open the phone and press YES. • Open the phone (if the phone function Answer call is activated. See “Phone functions” on page 20.). • If the phone is already open, press YES. To reject a call • Close the phone. • Press NO. • Quickly press a volume key twice. Missed calls If you have missed a call, Missed calls:1 appears in the external display and in the main display, indicating the number of missed calls. The most recent missed call is first on the call list, and the oldest call is last. Scroll to select and show the time if the call occurred on the same day. Otherwise, only the date appears for older missed calls. To check your missed calls 1. When Missed calls: 1 is displayed, open the phone and press YES to display the missed calls. 2. To call a number from the list, scroll to the number, YES. Calling This is the Internet version of the user's guide. © Print only for private use. Call list The numbers of the last calls that you have made or received are saved in the call list. If your subscription includes the Calling Line Identification service and the caller’s number is identified, you will also find the numbers of answered and missed calls in the call list. To call a number from the call list 1. To enter the call list, press YES from standby. 2. Scroll to the number you want to call, YES. To clear the call list Scroll to Calls, YES, Options, YES, Clear Call List, YES. To turn the call list on or off Scroll to Calls, YES, Options, YES, Call Listing, YES. Phonebook Your phone has a phonebook in which you can save numbers and accompanying names (an entry). This means that you can retrieve a number from the phonebook instead of entering the number again. Saving a number When you want to save a phone number, you use the Add Number function in the phonebook menu. If you have already made and received calls, you can find these numbers in the Add numbers list. Every phone number you save also gets a position number. If you want to, you can choose to sort your phonebook entries according to their position number instead of the name. If you intend to use your phone both at home and abroad, it is a good idea to save all phone numbers as international phone numbers, i.e. with the + sign, followed by the country code, the area code and the phone number. Press and hold to enter the + sign. To save a number together with a name 1. Scroll to Phonebook, YES, Add Number, YES. 2. Select Add New or any of the numbers from the list by pressing YES. 3. Enter the phone number that you want to save and press YES. Calling This is the Internet version of the user's guide. © Print only for private use. 25 4. Enter a name that you want to associate with the phone number and press YES. See “Entering letters and characters” on page 12. 5. Press YES again to save the entry in the suggested position. Pictures and personal rings You can add a picture to a phonebook entry. If your subscription includes the CallerID (CID) service, you can assign a personal ring signal to a caller. 1. 2. 3. 4. To add a picture to a phonebook entry Scroll to Phonebook, YES, Picture, YES. Select Add New, press YES. Press YES to go to the phonebook, YES. This takes you to Picture. Select a picture and press YES. 1. 2. 3. 4. To add a ring signal to a phonebook entry Scroll to Phonebook, YES, Personal Rings, YES. Select Add New, press YES. Press to go to the phonebook, YES. This takes you to Personal Rings. Select a ring signal and press YES. 26 Calling a number saved in the phonebook You use the Find and Call function to call a number that you have saved in the phonebook. To call a number saved in the phonebook 1. Scroll to Phonebook, YES, Find and call, YES. 2. Enter the name or the first few letters of the name (sort order by name) associated with the number that you want to call and press YES. 3. If the name displayed is not the one you want, press or until you find the correct name and number. 4. Press YES to make the call. Speed dialing You can call the phone numbers that you have saved in positions 1–9 by entering the position number in standby, and then pressing YES. Example: Press and then YES. Shortcuts to phonebook entries When in standby, you can find an entry of the keys – to find an entry beginning with the first letter on that key, or the closest following. Calling This is the Internet version of the user's guide. © Print only for private use. Example: Press and hold to get to the first entry beginning with the letter “G” (or the closest following). Then scroll up or down, using or When you find the entry you want, press YES to make the call. . Ask to save If Ask to Save is on, you are asked if you want to save any called or answered number that is not already saved in your phonebook. Note: Your subscription must include the Caller ID service if you want to save answered numbers. To turn the Ask to Save function on or off 1. Scroll to Phonebook, YES, Options, YES, Ask to Save, YES. 2. Select On or Off and press YES. Keeping the phonebook up to date You can change and delete names and numbers from the phonebook. To edit an entry 1. Scroll to Phonebook, YES, Find and Edit, YES. 2. Enter the name (or the first few letters) for the entry that you wish to edit and press YES. 3. Press YES to select the entry. 4. Select Edit and press YES. 5. When you have finished editing, press YES to save your changes. To delete an entry from the phonebook 1. Scroll to Phonebook, YES, Find and Edit, YES. 2. Enter the name (or the first few letters) for the entry that you wish to delete and press YES. When the entry you want to delete is highlighted, press YES. 3. Press YES to confirm. Sort order You may change the sort order of your phonebook entries, so that they are sorted according to their position number instead of the name. This means that you search for the position number when you use the Find and Call or the Find and Edit functions. Calling This is the Internet version of the user's guide. © Print only for private use. 27 To choose a sort order 1. Scroll to Phonebook, YES, Options, YES, Sort Order, YES. 2. Select a sort order and press YES. Phonebook memories Your phonebook entries are saved in the memory on your SIM card. The number of entries you can save depends on your SIM card. By saving your entries on the SIM card, you still have access to them if you use the card with another phone. You can also save your entries in the phone memory. The phone memory holds a number of positions in which your entries are saved when all SIM positions are occupied. If you save your entries in the phone memory, you still have access to them if you use another SIM card with your phone. Choosing where to save an entry When you save an entry and are asked to enter the position number, you can do the following: • To save the number in the first empty position suggested, press YES. 28 • To save the number in another position, press to delete the position number, enter a new position number and press YES. • To save the number in the phone memory, you first need to know how many positions you have got on your SIM card. You can check this in the Memory Status menu, see page 28. If, for example, you have 200 positions on your SIM card, you can enter position number 201 to save a number in the first position of the phone memory. Replacing entries If you try to save a phone number in a position which already contains a phone number, the message Overwrite? appears together with the name saved in that position. You now have two options: • Press YES to replace the number with the new one. • Press NO if you do not want to replace the old number. Enter a new position and press YES. Checking the status of the memory You can check how many memory positions you have in your memories and how many of them you have used. Calling This is the Internet version of the user's guide. © Print only for private use. To check the status of the memories Scroll to Phonebook, YES, Memory Status, YES. If you have saved entries in the phone memory, you can delete them. To delete all entries from the phone memory 1. Scroll to Phonebook, YES, Options, YES, Delete all?, YES. 2. Press YES again. If you delete all entries from the phone memory, the entries on your SIM card are not deleted. Copy phonebook entries You can copy the phonebook entries between your phone’s memory and the SIM card. The number of entries that can be saved depends on the type of SIM card. To copy entries to the SIM card Scroll to Phonebook, YES, Options, YES, Copy to SIM. To copy entries to the phone Scroll to Phonebook, YES, Options, YES, Copy from SIM. Groups You can create a group of phonebook entries. You can then send a text message to all members of that group at the same time. See “Text messages (SMS)” on page 43. To create a new group 1. Scroll to Phonebook, YES, Groups, YES, Add group?, YES. 2. Enter a name for the group and press YES. 3. Scroll to Add New and press YES. 4. Select an entry in your phonebook and press YES. 5. To add the next member, repeat steps 3 and 4. 6. Press NO to leave the menu. To add a member to an existing group Select the group you want and then select Edit, YES, Add New, YES. Voice mail If your subscription includes an answering service, callers can leave a voice mail message when you cannot answer a call. Calling This is the Internet version of the user's guide. © Print only for private use. 29 Receiving a voice mail message Depending on your network operator, you are informed that someone has left a message by a text message or by a voice mail indication. Calling your voice mail service You can easily call your voice mail service by pressing and holding , if you have saved your voice mail number in the phone. You get the number from your service provider. 30 Call cost For cost information you need to verify with your network operator or service provider whether you can subscribe to such a service where call cost (or the number of call units) is displayed. Cost information If you have a subscription with a cost information service, you can check the cost of your last call and the total cost of your calls. To enter a voice mail number Scroll to Messages, YES, Options, YES, Voicemail No., YES. Note: If you subscribe to cost information, you must enter your PIN2 to clear the cost or time counter. Call time During a call, the duration of the call is shown in the display. You can check the duration of your last call, outgoing calls and the total time. To check the call cost and reset cost meter • Scroll to Calls, YES, Time & Cost, YES, Call Costs and select an option, YES. • Select Clear Total Cost to reset the call cost meter. To check the call time and reset timer • Scroll to Calls, YES, Time & Cost, YES, Call Timers and select an option, YES. • Select Reset Timers to reset the call time meter. Setting the call cost You can use the rate function to specify the price per call unit. If you do not specify a price per call unit, the number of call units is displayed. Calling This is the Internet version of the user's guide. © Print only for private use. To enter the price per call unit 1. Scroll to Calls, YES, Time & Cost, YES, Call Costs, YES, Set Rate, YES. 2. Enter your PIN2, YES. 3. Select Change Rate, YES. 4. Enter the code for the currency you want (for example USD for US Dollars), YES. 5. Enter the price per call unit, YES. To enter a decimal point, press . Credit limit for calls You can enter a total amount of money that can be used for making calls. When the amount reaches zero, no more calls can be made. Please note that the credit limit is only an estimated value. To set a credit limit 1. Scroll to Calls, YES, Time & Cost, YES, Call Costs, YES, Set Credit, YES. 2. Enter your PIN2, YES. 3. Select Change, YES. 4. Enter an amount, YES. See “Security” on page 54 for more information about PIN2. Forwarding calls If you cannot answer incoming voice or data calls, you can forward them to another number, for example your answering service. Note: When the Restrict Calls function is on, some Forward Calls options cannot be activated. For voice calls, you can choose between the following forward alternatives: • Always Forward – forward all voice calls. • When Busy – forward calls if you are already on the phone. • Not Reachable – forward calls if your phone is turned off or if you are unreachable. • No Reply – forward calls that you do not answer within a specified time limit (operator-dependent). To turn on a call forward 1. Scroll to Calls, YES, Manage Calls, YES, Forward Calls, YES. 2. Select a call category and then a forward alternative, YES. Calling This is the Internet version of the user's guide. © Print only for private use. 31 3. Select Activate, YES. 4. Enter the phone number to which you want your calls to be forwarded and press YES, or retrieve it from the phonebook. To turn off a call forward Select a forward alternative and select Cancel. To check status 1. Scroll to Calls, YES, Manage Calls, YES, Forward Calls, YES. 2. Select a call type, YES. 3. Scroll to the forward you want to check, YES. Select Get Status, YES. To check the status of all call forwards Select Check All in the Forward Calls menu. More than one call You can handle more than one call simultaneously. For example, you can put an ongoing call on hold, while you make or answer a second call, and then switch between the two calls. You cannot answer a third call without ending one of the first two calls. 32 Note: During a call the Ongoing Call menu replaces the Calls menu. Call waiting service If the call waiting service is activated, you hear a beep in the earpiece if you receive a second call during an ongoing call. To activate or deactivate the call waiting service Scroll to Calls, YES, Manage Calls, YES, Call Waiting, YES. To make a second call 1. Press YES to put the ongoing call on hold. You can only put one call on hold. 2. Enter the number you want to call and press YES, or retrieve a number from the phonebook. You can also reach different options by pressing . To receive a second call • To answer the second call and put the ongoing call on hold, press YES. • To reject the second call and continue the ongoing call, select Busy. • To answer the second call and to end the ongoing call, select Release & Answ. Calling This is the Internet version of the user's guide. © Print only for private use. Handling two calls When you have one ongoing call and one call on hold, you can do the following: • Press YES to switch between the two calls. • Press and select Join Calls to join the two calls into a conference call. • Press and select Transfer Call to connect the two calls. You are disconnected from both calls. • Press NO to end the ongoing call, then press YES to retrieve the held call. • Press NO twice to end both calls. Conference calls You can have a joint conversation (conference call) with up to five people. You can also put a conference on hold and make another call. Note: There may be additional charges for calls involving multiple parties. Contact your service provider for more information. Creating a conference call To create a conference call, you must first have one ongoing call and one call on hold. To join the two calls into a conference call Scroll to Ongoing Call, YES, Join Calls, YES. To add a new participant 1. Press YES to put the conference call on hold. 2. Call the next person you wish to include in the conference call. 3. Press , select Join Calls, YES. Repeat steps 1 to 3 to include more participants. To release a participant 1. Press , select Release Party, YES. 2. Select the participant, YES. To end the conference call Press NO. Having a private conversation You can have a private conversation with one of the participants and put the other participants on hold. To start a private conversation 1. Press , then select Extract Part to select the participant that you want to talk with. 2. Select Join Calls to resume the conference call. Calling This is the Internet version of the user's guide. © Print only for private use. 33 Restricted dialing You can use the restrict calls service to restrict outgoing and incoming calls. This may be useful, for example, when you are abroad. To use this service, you need a password which you get from your service provider. Note: If you forward incoming calls, you cannot activate some Restrict Calls options. The following calls can be restricted: • All Outgoing – All outgoing calls. • Outgoing Intl. – All outgoing international calls. • Outg. Intl. Roam – All outgoing international calls except to your home country. • All Incoming – All incoming calls. • Inc. when Roam – All incoming calls when you are abroad (when roaming). To turn a call restriction on or off 1. Scroll to Calls, YES, Manage Calls, YES, Restrict Calls, YES. 2. Select an option, YES. 3. Select Activate or Cancel, YES. 4. Enter your PIN, YES. 34 Fixed dialing The fixed dialing function allows calls to be made only to certain numbers saved on the SIM card. Note: Calls to international emergency numbers can still be made even when the fixed dialing function is on. Fixed dialing requires a SIM card that allows fixed numbers to be saved. The fixed numbers are protected by your PIN2. You can save partial numbers or numbers with question marks. • Partial numbers: Saving 0123456 allows calls to be made to all numbers starting with 0123456. • Numbers with question marks: Saving 01234567?0, allows calls to be made to numbers from 0123456700 to 0123456790. To enter a question mark, press and hold . To turn fixed dialing on or off 1. Scroll to Phonebook, YES, Options, YES, Fixed Dialing, YES. 2. Enter your PIN2, YES. 3. Select On or Off, YES. Calling This is the Internet version of the user's guide. © Print only for private use. To save a fixed number 1. Scroll to Phonebook, YES, Special Numbers, YES, Fixed Numbers, YES. 2. Select Add New and enter the number. Closed user groups The Closed User Group function is a way of lowering call costs. On some networks it is cheaper to make calls within a call group. You can save ten groups. To add a group 1. Scroll to Calls, YES, Manage Calls, YES, Closed Groups, YES, Edit List, YES. 2. Scroll to Add New, YES. 3. Enter the name of the user group, YES. 4. Enter the index number, YES. You get the index number from your operator. To activate a group 1. Scroll to Calls, YES, Manage Calls, YES, Closed Groups, YES, Edit List, YES. 2. Select a group, YES. 3. Select Activate, YES. Calls can only be made within the selected group. To call outside a Closed User Group Select Open Calls and then select On. Accept calls With the accept calls service, you can choose to receive calls only from certain numbers. Other calls are automatically rejected by a busy tone. The phone numbers of calls you have rejected are saved in the Call List. To add numbers to the accepted callers list 1. Scroll to Calls, YES, Manage Calls, YES, Accept Calls, YES, Accepted List, YES. 2. Scroll to Add New, YES. 3. Select an option, YES. 4. Select an entry, YES. To select an accept option Scroll to Calls, YES, Manage Calls, YES, Accept Calls, YES, Accept Options, YES. Networks When you turn on the phone it automatically selects your home network if this is within range. If it is not within range, you may use another network. This is called roaming. Calling This is the Internet version of the user's guide. © Print only for private use. 35 Additional calling functions Tone signals You can use telephone banking services or control an answering machine by sending tone signals (also known as DTMF tones or touch tones) during a call. To show or hide your phone number 1. Enter the phone number you want to call. 2. Press or scroll to Calls, YES, Next Call, YES. 3. Select Hide My Number or Show MyNumber and press YES to make the call. To send and clear tones • Press the number keys 0-9, and . • To clear the display after a call, press NO. Notepad You can use the phone to make note of a number during a call. When you press the number keys, the person you are talking to hears tone signals. To turn these tone signals off during the call, press , select Turn Off Tones, YES. When you end the call, the number remains in the display. You can then call the number by pressing YES. Showing or hiding your number If your subscription supports the Caller ID Restriction service, you can hide your phone number when making a call. 36 Calling This is the Internet version of the user's guide. © Print only for private use. Setting up WAP WAP browser Requirements In order to use the Internet or browse via WAP services, the following are required: • A phone subscription that supports data transmission. • Settings entered in your phone. Settings may already be entered when you buy your phone or you can receive settings in a text message from your network operator or service provider. You can also find settings at www.SonyEricsson.com. • You may also have to register as a WAP user with your service provider or network operator. Receiving settings in a text message Your GSM network operator or Internet service provider may be able to send the required data account and WAP settings direct to your phone in a text message (SMS). Request settings from Sony Ericsson Use a PC to go to www.SonyEricsson.com. Select your region and then use the Configurators to request that a text message be sent to your phone with the settings you need. To install settings When the message arrives, New settings received. Install? appears: • Press YES to install the new settings. If settings already exist in your phone you can either keep or replace them. See “Advanced setting information” on page 38. • Press NO to cancel installation. After installation, see “Using WAP” on page 48. Set up with the wizard If your phone is not set up for WAP, you can ask your network operator or service provider to provide you with WAP settings information. Then you can simply use the wizard in your phone to help guide you through the relevant settings. Setting up WAP This is the Internet version of the user's guide. © Print only for private use. 37 To use the wizard for setting up WAP 1. Scroll to WAP Services, YES, homepage (for example Sony Ericsson), YES. The wizard now starts if no WAP settings exist. 2. Enter and save settings when asked, press YES to confirm. Advanced setting information Some advanced settings that are described in the following texts may not be mandatory, please consult your network operator or service provider for more information. A data account includes connection settings for access to a server at your service provider, for example via WAP or via email. A WAP profile includes user settings that allow WAP browsing. To use the WAP browser, via a WAP service provider, you need settings for a specific data account for WAP, and a WAP profile. To send a text message (SMS) to an email address via your network operator, you need to set an email gateway phone number. Data account settings You can have several data accounts saved in your phone with different settings for different purposes. The main setting for a data account is the Account Type (connection method). Tip: If there are no data account or WAP profile settings in your phone, you can enter data account settings when you enter WAP profile settings. You can choose from GPRS Data or GSM Data account types. If you want to change access type, you have to create a new data account and select the access type you want to use. Note: Please contact your network operator for charging details. GPRS GPRS (General Packet Radio Service) allows fast and efficient access where you can always be online. Note: You need a subscription that supports GPRS. 38 Setting up WAP This is the Internet version of the user's guide. © Print only for private use. GPRS settings that are available: • APN (Access point name address) – the address of the external data network you want to connect to, either an IP address or a text string. • User ID – your user id to log on to the external data network. • Password – your password to log on to the external data network. • Pwd. Request (Password request) – if this setting is on, you are asked for a password each time you log on to the external data network. • Allow Calls (Preferred service) – if you want to be able to accept incoming calls during a GPRS session, select Automatic. If not, select GPRS Only. • IP Address – the IP address that the phone uses when communicating with the network. If you do not enter an address, the network provides you with a temporary IP address. • DNS Address – if the network does not provide the IP address to the DNS server automatically, you may enter it here. • Advan. Settings (Advanced settings) – these are optional. Consult your network operator. GSM GSM settings include some settings that are similar to GPRS settings and some that are GSM-specific as follows: • Phone Number – the phone number of your Internet service provider. • Data Rate – select the speed you want for the connection. • Dial Type – select analog or ISDN connection. To create a data account manually 1. Scroll to Connect, YES, Data Comm., YES, Data Accounts, YES, Add account?, YES. 2. Select an account type for access. 3. Enter a name for the data account. 4. Enter the settings that you have received from your network operator or service provider. Confirm each setting by pressing YES. 5. Scroll to Save?, YES. To edit a data account 1. Scroll to Connect, YES, Data Comm., YES, Data Accounts, YES. 2. Select a data account, YES. 3. Select Edit. Setting up WAP This is the Internet version of the user's guide. © Print only for private use. 39 4. Select the setting you want to edit, YES. Edit the setting, YES. 5. Repeat step 4 for other settings you want to edit. Preferred service You can set GPRS or GSM as the preferred service. Note: To see the status of GPRS coverage and connection in standby look at the triangle above the signal strength indicator. If the triangle is filled GPRS is available. Otherwise it is not. To select preferred mode Scroll to Connect, YES, Data Comm., YES, Pref. Service, YES, and select GPRS and GSM or GSM Only. WAP profile settings The WAP settings are stored in a WAP profile. In most cases you only need to use one profile to access the Internet. You set up and use additional WAP profiles, for example, when accessing secure Internet sites such as a banking site or a corporate intranet. You then simply switch between profiles when you need to change the network connection. 40 To enter WAP profile settings manually 1. Make sure you have a data account set up between your phone and the Internet server, as described in “Data account settings” on page 38. 2. Scroll to WAP Services, YES, Options, YES, WAP Profiles, YES. 3. Select Add profile? to add a new profile or select an existing profile that you want to edit, YES. To enter information in a new profile When selecting Add profile? enter a name for the profile, YES, Connect using:, YES, select the data account to be used, YES and enter the IP address:, YES. A list appears. Scroll to Save?, YES. To edit an existing profile When selecting an existing profile, you can do the following: • Rename – Change the name of the profile. • Connect Using – Select data account. • IP Address – WAP gateway server address. • Advanced – More profile settings, see below. • Delete – Remove the profile. Setting up WAP This is the Internet version of the user's guide. © Print only for private use. To use advanced profile settings If you select Advanced you can do the following: • Chg. Homepage – Enter the address of the WAP site you want as the homepage. • Second Account – Select an alternative data account if the first in Connect Using fails. • User ID – Enter your user id for the WAP gateway. • Password – Enter your password for the WAP gateway. • Security – See WAP security settings. • Show Pictures – View pictures while browsing. WAP security settings Your phone has support for WAP secure browsing. Security for a connection between a WAP gateway and a WAP service provider is the responsibility of the WAP service provider. Turning on security When you turn on security, the connection between your phone and the WAP gateway is secure. To turn on a secure connection 1. Scroll to WAP Services, YES, Options, YES, WAP Profiles, YES. 2. Select the profile to be used, YES. 3. Select Advanced, YES, Security, YES. 4. Select On, YES. Trusted certificates To establish a secure connection when using certain WAP services, for example banking or WAP shopping, you need certificates in your phone. The different types of certificates are as follows: • Server certificates are used to identify a WAP gateway to the phone and to show that it is certified by a trusted authority. The server certificate is checked against trusted certificates that are stored in the phone. If the phone cannot verify the identity of a server, you are given the options to terminate or continue the connection. • Trusted certificates are used to verify the WAP gateway that you are trying to connect to. Your phone may already contain trusted certificates when you buy it.You can also download trusted certificates from Sony Ericsson or other WAP pages. Setting up WAP This is the Internet version of the user's guide. © Print only for private use. 41 To check the certificates in your phone • Scroll to WAP Services, YES, Options, YES, Common, YES, Security, YES, Trusted Certif., YES. Messaging Text messaging Service numbers The number to your service center is provided by your operator. If the number to your service center is not saved on your SIM card, you must specify the number yourself. Otherwise you cannot reply to received messages or send your own messages. Your phone also features enhanced messaging services (EMS) that allow you to add pictures, animations, sounds and melodies to text messages. To check the number to your service center 1. Scroll to Messages, YES, Options, YES, Service Centers, YES. If no number is found, select Add New and press YES. 2. Enter the number, including the international + sign and country code, and press YES. 42 Messaging This is the Internet version of the user's guide. © Print only for private use. Sending a text message to a group You can send text messages to groups that you have specified and saved in your phonebook, see “Groups” on page 29. You will be charged for each group member. Text messages (SMS) You can use the Short Message Service (SMS) to send and receive text messages consisting of up to 160 characters. Note: Some language-specific characters use more space. Turn off National Char. to save space. See “The list of options” on page 14. To send a text message 1. Scroll to Messages, YES, Write New, YES. 2. Enter your message and press YES. See “Entering letters and characters” on page 12. 3. Enter the recipient’s phone number or retrieve it from the phonebook by pressing . 4. Press YES to send the message. 1. 2. 3. 4. 5. To insert an item in a text message Scroll to Messages, YES, Write New, YES. While writing your message press to enter the option menu. Select Add Symbol or Insert Item, YES. Select Picture, Sound, Melody or Animation, YES. Select an object or symbol, YES. Then press YES again to confirm. 1. 2. 3. 4. To send a text message to a group Scroll to Messages, YES, Write New, YES. Enter your message and press YES. Press , select Groups and press YES. Select a group and press YES. Text formatting You can change the style, size and alignment of the text in a text message. 1. 2. 3. 4. To format the text in a text message Scroll to Messages, YES, Write New, YES. Write the text message. Press . Select Text Format, YES. Then select Text Size, Text Style or Alignment, YES. Select a format and press YES. Messaging This is the Internet version of the user's guide. © Print only for private use. 43 Long messages A text message can contain up to 160 characters. You can send a longer message by linking two or more messages. Please note that you are charged for the number of linked messages. To turn long messages on Scroll to Messages, YES, Options, YES, Long Messages, YES, On, YES. Message options You can set a default value for the message options below, or you can turn on the Set on Send option which means that you choose the settings each time you send a message. • SMS Type – The phone supports different types of messages. Your service provider may offer the facility of converting a text message into a format (email, for example) that suits the equipment that is going to receive the message. • Validity Period – If your message cannot be delivered, for example, if the recipient has turned off the phone, your service center can save the message to send it later. 44 • Request Reply – Include a reply request if you want the recipient of your message to reply. • Status Request – Verify whether a message has been delivered. To set a default message option 1. Scroll to Messages, YES, Options, YES. 2. Select SMS Type, Validity Period, Request Reply, or Status Request, YES. 3. Select an option from the list, YES. To turn set on send on or off Repeat steps 1 and 2 above, then select Set on Send, YES. Templates If you have one or more messages that you send often, you can save these as templates. You can save 20 templates consisting of up to 60 characters each. Your phone may come with a set of templates that your operator or service provider has prepared for you. These templates appear in the list of templates, indicated by an icon. Messaging This is the Internet version of the user's guide. © Print only for private use. To create a template 1. Scroll to Messages, YES, Templates, YES, Add New, YES. 2. Enter the message and press YES to save the template. To use a template Select a template from the Templates list in the Messages menu, and proceed as described in “To send a text message” on page 43. Message counter You can check the number of text messages that you have sent. To check the number of sent messages Scroll to Calls, YES, Time & Cost, YES, SMS Counter, YES, Show Counter. To reset the message counter Scroll to Calls, YES, Time & Cost, YES, SMS Counter, YES, Reset Counter. Receiving a message When you receive a message, the phone beeps and the message New Messages appears in the display. If the sender of the message wants you to reply, the message Reply requested. Reply? appears in the display. Press YES again to reply. If you do not want to reply, press NO. To read the message now 1. Press YES. 2. Use the navigation key to scroll through the message. When you have read the message, press YES. A new menu with different options appears. These options are described on the following pages. To read the message later Press NO to save the message in your Inbox in the Messages menu. To reply to a message 1. When you have read the message, press YES. 2. Select Reply in the option list and press YES. Messaging This is the Internet version of the user's guide. © Print only for private use. 45 3. Select the message you want to send as a reply and press YES. You can choose between: Write New, Include This Msg. or Templates. 4. Write your message and press YES. To forward a message 1. When you have read the message, press YES. 2. Select Forward and press YES. Continue in the same way as when sending a new text message. To call a phone number found in a message When the number is highlighted, press YES. To call the sender of the message 1. When you have read the message, press YES. 2. Select Call and press YES. To read the next message 1. When you have read the message, press YES. 2. Select Read Next and press YES. To delete a message 1. When you have read the message, press YES. 2. Select Delete and press YES. 46 Saving incoming messages Incoming messages are saved in the phone memory. When both the phone memory and the SIM memory are full, a flashing envelope in the display indicates that you have to empty the inbox to be able to receive new messages. If the phone memory becomes full of unread messages, new messages are automatically saved on the SIM card. Messages that are saved on the SIM card remain there until you delete them. To save a message on the SIM card 1. When you have read the message, press YES. 2. Select Save on SIM and press YES. Area information The ordinary Short Message Service is a personal service that carries your private messages. Area Information is another type of text message that is sent to all subscribers in a certain network area. This information could, for example, be a local traffic report or the phone number of a local taxi company. Messaging This is the Internet version of the user's guide. © Print only for private use. Area information usage Please refer to the information provided by your operator for more information about the area information codes. To turn area information on or off 1. Scroll to Messages, YES, Area Info., YES, Reception. 2. Select On or Off and press YES. To enter an area information code 1. Scroll to Messages, YES, Area Info., YES, Message List, YES, Add New, YES. 2. Enter the new code and press YES. Cell information The “Cell information channel” is used by some network operators for sending messages to their subscribers within a certain network area. You read messages on the Cell information channel in the same way as when reading area messages. To turn the Cell information channel on Scroll to Messages, YES, Area Info., YES, Cell Information, YES and then select On. Receiving an area message When you receive an Area Information message, the message automatically appears in the display. You read the message in the same way as you read an ordinary text message. You cannot save area messages. When you have read the message and press YES or NO, it is deleted. Messaging This is the Internet version of the user's guide. © Print only for private use. 47 Using WAP WAP browser, bookmarks Your phone has a WAP (Wireless Application Protocol) browser which is designed to bring a modified Internet to your mobile phone. A wide range of services are available, for example, news, entertainment, timetables, reservations, banking, e-commerce, positioning and email. Before you start First make sure that you have: • A phone subscription that supports data transmission. • Correct settings in your phone for WAP. See “Setting up WAP” on page 37. • Registered as a WAP user with your network operator or service provider. Using the WAP browser Settings may already be entered when you buy the phone. Otherwise you can receive the settings from your network operator or your service provider in a text message. 48 To start browsing First select the WAP profile you want to use. Scroll to WAP Services, YES, Select Profile, YES. Then select one of the following: • Open your homepage, for example, Sony Ericsson. • Go to one of your bookmarks. Select Bookmarks, YES. • Enter the address of a WAP site. Select Enter Address, YES, New address? to enter a new WAP address or select one of the 10 most recently entered addresses. When you enter a WAP address, the normal http:// prefix is not needed. To exit WAP and disconnect • Press and hold NO or • Press , select Exit. Options when browsing When you have started browsing, you can reach different browsing options by pressing . The options menu is dynamic. Its content may vary depending on which WAP site you are visiting. The options menu contains the following: Using WAP This is the Internet version of the user's guide. © Print only for private use. • Go to the homepage set for the current WAP profile. If you select an email address when browsing a WAP site, you can reply with a text message. • Bookmarks – Add the site you are currently browsing to your list of bookmarks, or see the list of bookmarks for the current profile. • Push Inbox – Displays received push messages. • Enter Address – Enter the WAP address of a site you want to visit. • Save Picture – Save a picture from the site. • Send via SMS – Send a text message with a link to the current WAP page to another phone. • Reload – Refresh the contents of the WAP page. • Exit – Disconnect and go to standby. • Status – Display current status information, for example, profile, access type, connection time, data rate, security, address. • Set as homepg – Set the current site as the homepage of the WAP profile you are using. • Edit – Edit the name and/or the WAP address of the bookmark. • Delete – Delete the bookmark. Using bookmarks You use bookmarks in your mobile phone just as you do with a PC Internet browser. You can have up to a maximum of 25 bookmarks. To work with bookmarks 1. Scroll to WAP Services, YES, Bookmarks, YES. 2. Select the bookmark you want to work with, . Select Go to Bookmark, Edit, Delete, Send via SMS, or Set as homepg and press YES. Downloading You can download, for example, pictures and ring signals, from WAP sites directly to your phone. Note: Make sure the file sizes do not exceed the free memory in your phone, see “Memory status” on page 55 for more information. To download from wap.SonyEricsson.com 1. Scroll to WAP Services, YES, Bookmarks, YES, Sony Ericsson, YES. 2. Select what you want to download and follow the instructions that appear, YES. Using WAP This is the Internet version of the user's guide. © Print only for private use. 49 WAP push messages You can receive push messages via WAP Services. This means that a service provider sends WAP content (information) to your phone without you having to do anything. You can, for example, get updated news or new WAP settings from your service provider. There are two kinds of push messages: • Text messages that inform you about WAP services by sending a link. To go to the WAP service, click the link and select Load. • Updated information from a WAP service is sent to appear in the WAP browser. Receiving a push message You can set your phone to either accept or reject push messages. This is valid for all your WAP profiles. To set push message acceptance Scroll to WAP Services, YES, Options, YES, Common, YES, Push Access, YES and select one of the following settings: • On – You allow push messages to be automatically loaded. 50 • Prompt – You allow push messages, but only when you confirm. • Off – You do not allow push messages. To respond to a push message Scroll to WAP Services, YES, Push Inbox, YES, scroll to any push message, YES and select one of the following: • Load – The browser starts and loads the WAP site so that you can see the push content. • Delete – Deletes the push message. • Postpone – Save the message to be loaded later. Stored information The following information can be saved in your phone: • Cache – improves memory efficiency. • Passwords – improves server access efficiency. • Cookies – improves site access efficiency. It is advisable to clear any sensitive information about previously visited WAP services. This is to avoid a security risk if your phone is misplaced, lost or stolen. Using WAP This is the Internet version of the user's guide. © Print only for private use. Note: See “WAP security settings” on page 41 for more information regarding security and certificates. To allow WAP information in your phone 1. Scroll to WAP Services, YES, Options, YES, Common, YES. 2. Select the information to allow, YES. To clear cache, password list, cookies or push inbox 1. Scroll to WAP Services, YES, Advanced, YES. 2. Select the information to be cleared. 3. Press YES to confirm. More features Alarm clock, stopwatch, calculator, calendar, games Alarm clock The alarm can be set to ring at a specific time within 24 hours, or recurrently at a specific time on several days. You can have both these alarms set at the same time. Even if you have set your phone to silent, the alarm signals ring. The alarm clock also rings if the phone is turned off. To set an alarm 1. Scroll to Organizer, YES, Alarms, YES, Alarm or Recurrent Alarm, YES. 2. Enter the time, YES and day, if recurrent, by scrolling and pressing , YES. To change the alarm time 1. Scroll to Organizer, YES, Alarms, YES, Alarm, YES, Set New Time, YES. 2. Press any key to turn the alarm signal off when it rings. If you do not want the alarm to be repeated, press YES. More features This is the Internet version of the user's guide. © Print only for private use. 51 To cancel the alarm Scroll to Organizer, YES, Alarms, YES, Alarm or Recurrent Alarm, YES, Cancel, YES. To select an alarm signal Scroll to Settings, YES, Sounds & Alerts, YES, Alarm Signal, YES. Stopwatch The stopwatch is turned off when you answer an incoming call or when you exit the stopwatch menu. To use the stopwatch Scroll to Organizer, YES, Stopwatch, YES, then press: to reset (when stopped). to save up to nine lap times. YES to start, stop or restart. NO to stop. or to check saved lap times. Calculator The phone has a built-in calculator which can add, subtract, divide and multiply. 52 Note: The accuracy of the calculator function is limited. To use the calculator 1. Scroll to Organizer, YES, Calculator, YES. 2. Enter digits with the keypad, then press: or to get ÷, x, -, +, a decimal point or %. to delete the figure. YES to calculate a result, equals to (=). to save to memory. to retrieve from memory. Timer The phone has a 24-hour timer. To set the timer Scroll to Organizer, YES, Timer, YES. When the signal rings, press any key to turn it off. Calendar In the calendar you can add tasks for things that you have to remember. The tasks can be edited or deleted. More features This is the Internet version of the user's guide. © Print only for private use. 1. 2. 3. 4. 5. 6. To delete all tasks Scroll to Organizer, YES, Calendar, YES, Delete All, YES. To add a task Scroll to Organizer, YES, Calendar, YES. Select Add task?, YES. Enter a description, YES. Enter the start/end dates and times, YES. Scroll to Continue?, YES. Set a reminder, if required, or select None and press YES to save. To edit a task 1. When the task is displayed, press YES. 2. Select Edit, YES. 3. Edit the task, YES, edit the date, YES, edit the reminder, YES. To set the reminder Select any of the predefined values or select Other Reminder, and enter the alarm date, YES and the alarm time. Press YES to save the task. Games Your phone has several entertaining games. Game controls are specified with help for each game. To view a task 1. Scroll to Organizer, YES, Calendar, YES. 2. Select View Today, View All Tasks, View Week, or View Month. Press YES. To delete a task Scroll to the task that you want to delete, press 1. 2. 3. 4. To start a game Scroll to Fun & Games, YES, Games, YES. Select a game, YES. Select New Game or Resume Game, YES. Start the game. . More features This is the Internet version of the user's guide. © Print only for private use. 53 Security SIM card lock, phone lock SIM card lock The SIM card lock protects your subscription, but not your phone itself, from unauthorized use. If you change SIM cards, the phone still works with the new SIM card. PIN and PUK code Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you have to enter a “PIN” (Personal Identity Number) every time you turn on your phone. As you enter your PIN, the digits are hidden with an *. However digits are shown if your PIN starts with the same digits as an emergency number, for example 112. This is so that you can see and call an emergency number without entering a PIN. See “Emergency calls” on page 23 for more information. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message PIN blocked. To unblock it you need to enter your “PUK” (Personal Unblocking Key). Your PIN and PUK are supplied by your operator. 54 1. 2. 3. 4. To unblock your SIM card PIN blocked. appears. Enter your PUK and press YES. Enter a new four- to eight-digit PIN and press YES. Reenter the new PIN to confirm and press YES. To edit your PIN Scroll to Settings, YES, Locks, YES, SIM Lock, YES, Change PIN, YES. If the message Codes do not match. appears, you entered the new PIN incorrectly. If the message Wrong PIN. appears, followed by Old PIN:, you entered your old PIN incorrectly. PIN2 Certain services are protected by a second PIN. To edit your PIN2 Scroll to Settings, YES, Locks, YES, SIM Lock, YES, Change PIN2, YES. To turn the SIM card lock on or off 1. Scroll to Settings, YES, Locks, YES, SIM Lock, YES, Protection, YES. 2. Select On or Off, and press YES. 3. Enter your PIN and press YES. Security This is the Internet version of the user's guide. © Print only for private use. Phone lock The phone lock protects the phone against unauthorized use if it is stolen and the SIM card is exchanged. It is not on when you buy the phone. You can change the phone lock code (0000) to any four- to eight-digit personal code. The phone lock can be set to on, automatic or off. Note: The phone lock code must be entered to use Master Reset. See “Master reset” on page 21 for more information. Phone lock on If the phone lock is on, the message Phone locked. appears each time you turn on the phone. You have to enter your code followed by YES to use your phone. Automatic If the phone lock is set to automatic, you do not need to enter your phone lock code until a different SIM card is inserted in the phone. To set the phone lock 1. Scroll to Settings, YES, Locks, YES, Phonelock, YES, Protection, YES. 2. Select an alternative and press YES. 3. Enter the phone lock code and press YES. Editing the phone lock code It is important that you remember your new code. If you should forget it, you will need to bring your phone in to your local Sony Ericsson retailer. To edit your phone lock code Scroll to Settings, YES, Locks, YES, Phonelock, YES, Change Code, YES. Memory status Check for example, how many positions are left in your phonebook or how much memory is used. To check the memory of the phonebook Scroll to Phonebook, YES, SMS Memory, YES. Security This is the Internet version of the user's guide. © Print only for private use. 55 To check the memory for themes, pictures, sounds, games Scroll to Fun & Games, YES, select one of the menus, YES, , select Memory Status, YES. To check memory for text messages Scroll to Messages, YES, SMS Memory, YES. Memory full Free memory by deleting unused files or information. To delete saved files or information Some factory default files and information cannot be deleted. • Select a file or information, press , YES. • Select a submenu option or advanced option to delete. 56 Troubleshooting Why doesn’t the phone work the way I want? This chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but most of the problems you can easily correct yourself. The phone cannot be switched on Hand-held phone Recharge or replace the battery. See “SIM card and battery information” on page 4. No indication of charging When you start charging a battery that is empty or a battery that has not been used for a long time, it may take up to 30 minutes before the battery icon appears in the display. Troubleshooting This is the Internet version of the user's guide. © Print only for private use. Menu language If the display shows a language that you do not understand, you can always set the following from standby: • Press 0000 for English menus. • Press 8888 for automatic, local menus. Grey menu options Grey text indicates a function that is temporarily unavailable, for example, due to your subscription or due to a certain setting which has not been turned on. Since you cannot send pictures and sounds that are copyright-protected, the Send menu is sometimes unavailable. Error messages Insert SIM. There is no SIM card in the phone, it may need cleaning or you may have inserted it incorrectly. See “SIM card and battery information” on page 4. Insert correct SIM card. The phone is set to work only with certain SIM cards. Insert the correct SIM card. Inactive SIM The SIM card is not activated. Contact your network operator for more information. Emergen. Calls Only You are within range of a network, but you are not allowed to use it. However, in an emergency, some operators allow you to call, for example, the international emergency number 112. See “Emergency calls” on page 23. No network. There is no network within range or the received signal is too weak. You have to move to get a signal that is strong enough. Wrong PIN./Wrong PIN2. You have entered your PIN or PIN2 incorrectly. Enter the correct PIN or PIN2, and press YES. See “SIM card lock” on page 54. Troubleshooting This is the Internet version of the user's guide. © Print only for private use. 57 Codes do not match. When you want to change a security code (for example your PIN) you have to confirm the new code by entering it again. The two codes that you have entered do not match. See “SIM card lock” on page 54. Number not permitted. The Fixed Dialing function is on and the number you have dialed is not on your fixed numbers list. See “Fixed dialing” on page 34. PIN blocked./PIN2 blocked. You have entered your PIN or PIN2 incorrectly three times in a row. To unblock, see “SIM card lock” on page 54. PUK blocked. Contact operator. You entered your personal unblocking key code (PUK) incorrectly 10 times in a row. Contact your network operator or service provider. Phone locked. The phone is locked. To unlock the phone, see “Phone lock” on page 55. Phone lock code: Your phone comes with the phone lock code, 0000. You can change it to any four- to eight-digit code. See “Phone lock” on page 55. 58 Troubleshooting This is the Internet version of the user's guide. © Print only for private use. Additional information Safe and efficient use, warranty, declaration of conformity Exchangeable front covers You can replace the front cover. To change the front cover 1. Gently pull the front cover away, starting from the top of the phone. 2. Slide the front cover and lift it off the phone. 3. Insert the notches of the new front cover into the corresponding slots on the phone. Slide and push the front cover up until it locks into place. Sony Ericsson Consumer web site At www.SonyEricsson.com there is a support section where help and tips are only a few clicks away. Here you find the latest software updates, tips on how to use your product more efficiently, function guides for some of the products and additional help when you require it. Additional information This is the Internet version of the user's guide. © Print only for private use. 59 Guidelines for Safe and Efficient Use Please read this information before using your mobile phone. • Do not attempt to disassemble your product. Only Sony Ericsson authorised personnel should perform service. RECOMMENDATIONS ANTENNA • Always treat your product with care and keep it in a clean and dust-free place • Do not expose your product to liquid or moisture or humidity. • Do not expose your product to extreme high or low temperatures. • Do not expose your product to open flames or lit tobacco products. • Do not drop, throw or try to bend your product. • Do not paint your product. • Do not use your product near medical equipment without requesting permission. • Do not use your product when in, or around aircraft, or areas posted “turn off two-way radio”. • Do not use your product in an area where a potentially explosive atmosphere exists. • Do not place your product or install wireless equipment in the area above your car’s air bag. 60 Only use an antenna that has been specifically designed by Sony Ericsson for your mobile phone. Use of unauthorised or modified antennas could damage your mobile phone and may violate regulations, causing loss of performance and SAR levels above the recommended limits (see below). EFFICIENT USE Hold your mobile phone as you would any other phone. Do not cover the top of the phone when in use, as this affects call quality and may cause the phone to operate at a higher power level than needed, thus shortening talk and standby times. RADIO FREQUENCY (RF) EXPOSURE AND SAR Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields). Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP Additional information This is the Internet version of the user's guide. © Print only for private use. (International Commission on Non-Ionizing Radiation Protection) and IEEE (The Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a mobile phone. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the mobile phone while operating can be well below this value. This is because the mobile phone is designed to use the minimum power required to reach the network. Variations in SAR below the radio frequency exposure guidelines do not mean that there are variations in safety. While there may be differences in SAR levels among mobile phones, all Sony Ericsson mobile phone models are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (that is, at the ear and worn on the body) as required by the FCC for each model. For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body without any metal parts in the vicinity of the phone or when used with the original Sony Ericsson body worn accessory intended for this phone. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. A separate leaflet with SAR information for this mobile phone model is included with the material that comes with this mobile phone. This information can also be found, together with more information on radio frequency exposure and SAR, on: www.SonyEricsson.com. DRIVING Please check if local laws and regulations restrict the use of mobile phones while driving or require drivers to use handsfree solutions. We recommend that you use only Ericsson or Sony Ericsson handsfree solutions intended for use with your product. Please note that because of possible interference to electronic equipment, some vehicle manufacturers forbid the use of mobile phones in their vehicles unless a handsfree kit with an external antenna supports the installation. Additional information This is the Internet version of the user's guide. © Print only for private use. 61 Always give full attention to driving and pull off the road and park before making or answering a call if driving conditions so require. PERSONAL MEDICAL DEVICES Mobile phones may affect the operation of cardiac pacemakers and other implanted equipment. Please avoid placing the mobile phone over the pacemaker, e.g. in your breast pocket. When using the mobile phone, place it at the ear opposite the pacemaker. If a minimum distance of 15 cm (6 inches) is kept between the mobile phone and the pacemaker, the risk of interference is limited. If you have any reason to suspect that interference is taking place, immediately turn off your mobile phone. Contact your cardiologist for more information. For other medical devices, please consult the manufacturer of the device. CHILDREN DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES. THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE THE MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY CONTAIN SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD. 62 DISPOSING OF THE PRODUCT Your mobile phone should not be placed in municipal waste. Please check local regulations for disposal of electronic products. POWER SUPPLY Connect the AC power adapter only to designated power sources as marked on the product. Make sure the cord is positioned so that it will not be subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it. The AC power adapter must not be used outdoors or in damp areas. Never alter the cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. EMERGENCY CALLS Mobile phones operate using radio signals, which cannot guarantee connection under all conditions. Therefore you should never rely solely upon any mobile phone for essential communications (e.g. medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services and/or mobile phone features are in use. Check with your local service provider. Additional information This is the Internet version of the user's guide. © Print only for private use. BATTERY USE AND CARE We recommend that you fully charge the battery before you use your mobile phone for the first time. The battery should only be charged in temperatures between +5°C (+41°F) and +45°C (+113°F). A new battery or one that has not been used for a long time could have reduced capacity the first few times it is used. The talk and standby times depend on the actual transmission conditions when using the mobile phone. If the mobile phone is used near a base station, less power is required and talk and standby times are prolonged. • Warning! May explode if disposed of in fire. • Use only Sony Ericsson branded original batteries and chargers intended for use with your mobile phone. Other chargers may not charge sufficiently or may produce excessive heat. Using other batteries and chargers could be dangerous. • Do not expose the battery to liquid. • Do not let the metal contacts on the battery touch another metal object. This could short-circuit and damage the battery. • Do not disassemble or modify the battery. • Do not expose the battery to extreme temperatures, never above +60°C (+140°F). For maximum battery capacity, use the battery in room temperature. • Turn off your mobile phone before removing the battery. • Keep out of children’s reach. • Use the battery for the intended purpose only. • Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic if swallowed. DISPOSING OF THE BATTERY Please check local regulations for disposal of batteries or call your local Sony Ericsson Customer Care Center for information. The battery should never be placed in municipal waste. Use a battery disposal facility if available. Limited Warranty Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony Ericsson), provides this Limited Warranty for your mobile phone and original accessory delivered with your mobile phone (hereinafter referred to as “Product”). Should your Product need warranty service, please return it to the dealer from whom it was purchased, or contact your local Sony Ericsson Customer Care Centre (national rates may apply) or visit www.SonyEricsson.com to get further information. Additional information This is the Internet version of the user's guide. © Print only for private use. 63 Our warranty Subject to the conditions of this Limited Warranty, Sony Ericsson warrants this Product to be free from defects in design, material and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. What we will do If, during the warranty period, this Product fails to operate under normal use and service, due to defects in design, materials or workmanship, Sony Ericsson authorised distributors or service partners, in the country/region* where you purchased the Product, will, at their option, either repair or replace the Product in accordance with the terms and conditions stipulated herein. Sony Ericsson and its service partners reserve the right to charge a handling fee if a returned Product is found not to be under warranty according to the conditions below. Please note that your personal settings/downloads might be lost when the Product is repaired or replaced. Conditions 1. The warranty is valid only if the original proof of purchase issued to the original purchaser by an, for this Product, Sony Ericsson authorised dealer, specifying the date of purchase and serial number**, is presented with the Product to be repaired or replaced. 64 Sony Ericsson reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer. 2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of Sony Ericsson. 3. This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with the Sony Ericsson instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, software or hardware modification or adjustment, acts of God or damage resulting from liquid. A rechargeable battery can be charged and discharged hundreds of times. However, it will eventually wear out – this is not a defect. When the talk-time or standby time is noticeably shorter, it is time to replace your battery. Sony Ericsson recommends that you use only batteries and chargers approved by Sony Ericsson. Additional information This is the Internet version of the user's guide. © Print only for private use. 4. Since the cellular system on which the Product is to operate is provided by a carrier independent from Sony Ericsson, Sony Ericsson will not be responsible for the operation, availability, coverage, services or range of that system. 5. This warranty does not cover Product failures caused by installations, modifications, or repair or opening of the Product performed by a non-Sony Ericsson authorised person. 6. The warranty does not cover Product failures which have been caused by use of accessories or other peripheral devices which are not Ericsson or Sony Ericsson branded original accessories intended for use with the Product. 7. Tampering with any of the seals on the Product will void the warranty. 8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable legislation in force, nor the consumer's rights against the dealer arising from their sales/ purchase contract. * European union (EU) If you have purchased your Product in an EU country you can have your Product serviced, under the conditions set out above, within the warranty period in any EU country where an identical Product is sold by an authorised Sony Ericsson distributor. To find out if your Product is sold in the EU country you are in, please call the local Sony Ericsson Customer Care Centre. Please observe that certain services may not be possible elsewhere than in the country of original purchase, for example due to the fact that your Product may have an interior or exterior which is different from equivalent models sold in other EU countries. It may not be possible to repair SIM-locked Products. ** In some countries/regions additional information is requested. If so, this is clearly shown on the valid proof of purchase. Additional information This is the Internet version of the user's guide. © Print only for private use. 65 FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Declaration of Conformity We, Sony Ericsson Mobile Communications AB of Nya Vattentornet S-221 88 Lund, Sweden. declare under our sole responsibility that our product Sony Ericsson type AAB-1021021-BV and in combination with our accessories, to which this declaration relates is in conformity with the appropriate standards 3GPP TS 51.010-1, EN 301489-7, EN 60950, following the provisions of, Radio Equipment and Telecommunication Terminal Equipment directive 99/5/EC with requirements covering EMC directive 89/336/EEC, and Low Voltage directive 73/23/EEC. Lund, June 2003 0682 Hiroshi Yoshioka, Head of Product Business Unit GSM/UMTS We fulfill the requirements of the R&TTE Directive (99/5/EC). 66 Additional information This is the Internet version of the user's guide. © Print only for private use. Icons Icon What do the icons mean? The table below shows icons which may appear in standby or in the menus. Icon Description Main menus Your personal phonebook. Description Receive items via infrared, networks, data communications settings and accessories. Create your own menu for the functions you use most often. Standby Tells you the strength of the GSM network signal. GPRS is within range, but can not be used. Handling of text (SMS) and voice messages. Handling of outgoing/incoming calls, call time and cost information. Handling of pictures, sounds and themes. Play games. Personal settings including profiles, display, language, time and locks. Gives you access to WAP services on the Internet. Events, alarm clock and other extras. GPRS is within range and can be used. Tells you the status of the battery. You cannot receive any incoming calls. You have missed an incoming call. All incoming calls are forwarded to a defined number. No calls or only certain calls from numbers in a list are received. Icons This is the Internet version of the user's guide. © Print only for private use. 67 Icon Description Description All signals are off. Ciphering is currently not being provided by the network. The alarm clock has been set and is on. The network is preferred and can be used. The timer has been set and is on. The network is forbidden and cannot be used. A profile other than Normal has been chosen. Your home network is within range and can be used. The card lock is on or a secure WAP connection is established. An ongoing call. You have received a text message. Phonebook You have received a voice message. You can enter the phonebook by pressing You have received a WAP push message. A picture is connected to a phonebook entry. The infrared port is on. Infrared communication is in progress. A GPRS session is in progress. 68 Icon Messages A text message is saved on the SIM card. A voice message has not been checked. Icons This is the Internet version of the user's guide. © Print only for private use. . Icon Description Icon Description A message has not been read. Fun & Games A message has been read. A standard melody saved in My Sounds. A damaged message. A polyphonic melody saved in My Sounds. The message has not been sent. The message has been sent. Pre-defined message template (not editable). User-defined message template. Calls A missed call in the call list. An answered call in the call list. A dialed number in the call list. Icons This is the Internet version of the user's guide. © Print only for private use. 69 Index A Alarm clock 51 Animations 15 Answering mode 20 Area information 46 Ask to save 27 B Battery 4 C Calculator 52 Calendar 52 Call costs 30 credit limit 31 minute minder 18 Call time 30 Calls accept 35 answer 5, 24 automatic re-dialling 23 call list 25 emergency 23 70 fixed dialing 34 forward 31 international 23 make 5, 22 missed 24 put on hold 32 receive 5, 24 reject 24 restrict 34 Cell information 47 Charging (battery) 4 Conference calls 33 Contrast (display) 19 D Declaration of conformity 66 Display contrast 19 icons 67 light 18 Downloading 49 E Emergency calls 23 Error messages 57 F Fixed dialing 34 Flip functions 20 Forwarding calls 31 G Games 53 memory status 55 GPRS 38 Groups closed user groups 35 conference calls 33 Groups. See Phonebook 29 GSM 39 GSM frequencies 2 H Handsfree 20 I Icons (display) 67 Infrared port 21 International calls 23 emergency number 23 Index This is the Internet version of the user's guide. © Print only for private use. K Key functions flip closed 6 flip open 7 Key sound 18 My numbers 20 My shortcuts 20 L Language (display) 18 Locks phone 55 SIM card 54 O Online services 10 Own number 20 M Master reset 21 Melodies, see Ring signals 16 Memory full 56 status 55 Menu language 18 Menu navigate 5 Menu overview 11 Messages. See Text messages Minute minder 18 Missed calls 24 Multitap text input 12 N Networks 5, 35 P Personal ring signal 26 Phone lock 55 Phonebook 25 ask to save 27 call from 26 card memory 28 check the memory 28 delete a phone number 27 edit a name 27 edit a phone number 27 groups 29 memory 28 memory status 55 phone memory 28 replacing entries 28 save a number 25 shortcuts 26 sort order 27 Pictures 15 animations 15 exchange 16 memory status 55 send 16 wallpaper 16 PIN change 54 enter 5 PIN2 54 Profiles 20 PUK 54 Q Quick keys 8 R Reading a message 45 Redialling 23 Reset 21 Ring signals 16 Index This is the Internet version of the user's guide. © Print only for private use. 71 S Save a number 25 Security phone lock 55 SIM card 54 WAP 41 Send a message 43 Service centre 42 Shortcuts 8, 9, 20 Silent ring signal 17 SIM card 4, 10 copy phonebook entries 29 lock 54 unblock 54 SMS. See Text messages Sony Ericsson web site 59 Sounds memory status 55 Speed dial 26 Stopwatch 52 72 T T9 Text input 13 Text messages call phone number 46 delete 46 forward 46 insert item 43 memory status 55 options 44 read 45 reply 45 save 46 send 43 Themes 15 memory status 55 Time settings 19 Turning the phone on/off 5 W WAP bookmarks 48 downloading 49 options 48 security 41 setting up 37 using WAP 48 Warranty 63 V Vibrating alert 18 Voice mail 29 Volume change speaker volume 22 Index This is the Internet version of the user's guide. © Print only for private use.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project