English
KARAOKE AMPLIFIER
DAH-100
OWNER'S MANUAL
Thank you very much for purchasing BMB products.
Prior to use, be sure to read this owner's manual from cover to cover
so that you can make the most of this unit. The manual will come in
handy whenever you come across any question or trouble while using
the unit.
CONTENTS
USING THE UNIT SAFELY............................................2
USING BLUETOOTH DEVICES ..................................14
IMPORTANT NOTES.....................................................5
TROUBLESHOOTING .................................................16
SPECIAL FEATURES ....................................................6
AFTER-SALE SERVICING ..........................................17
NAMES OF FRONT PANEL CONTROLS .....................7
MANNERS FOR CUSTOMERS...................................17
NAMES OF REAR PANEL CONTROLS........................9
COPYRIGHT................................................................17
SYSTEM CONNECTIONS...........................................10
ABOUT THE PRODUCT..............................................17
CONNECTIONS .......................................................... 11
SPECIFICATIONS .......................................................18
BASIC OPERATION ....................................................13
1
USING THE UNIT SAFELY
The lighting flash with arrowhead symbol is
intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
-------ALWAYS OBSERVE THE FOLLOWING------• ABOUT THE SAFETY SYMBOLS
WARNING
Do not disassemble or modify by yourself.
The lightning flash with arrowhead symbol,
within equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Do not open (or modify in any way) the unit or
its power cable.
Do not repair or replace parts by yourself.
Do not attempt to repair the unit, or replace
parts within it (except when this manual
provides specific instructions directing you to do
so). Refer all servicing to your retailer.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Do not use or store in the following types of locations.
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a
heating duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms, on wet
floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness; or are
• In a place near cooking utensils where the
unit may be subjected to soot, smoke, fume or
heat.
INSTRUCTIONS FOR THE PREVENTION OF FIRE,
ELECTRIC SHOCK OR INJURY TO PERSONS
About
WARNING and
CAUTION Notices
WARNING
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
CAUTION
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Do not place in an unstable location
Make sure you always place the unit where it is
level and sure to remain stable. Never place it
on stands that could wobble, or on inclined
surfaces.
About the Symbols
The
symbol alerts the user to important
instructions or warnings. The specific meaning of
the symbol is determined by the design
contained within the triangle. In the case of the
symbol at left, it is used for general cautions,
warnings or alerts to danger.
Use only the supplied power cable
Use only the supplied power cable. Do not use it
with any other device.
Do not bend the power cable or place heavy objects on
it.
The
symbol alerts the user to items that must
never be carried out (are forbidden). The specific
thing that must not be done is indicated by the
design contained within the circle. In the case of
the symbol at left, it means that the unit must
never be disassembled.
Do not excessively twist or bend the power
cable, nor place heavy objects on it. Doing so
can damage the power cable, resulting in
severing the cable and short circuits. Damaged
cables may cause fire and electric shock.
The
symbol alerts the user to things that must
be carried out. The specific thing that must be
done is indicated by the design contained within
the circle. In the case of the symbol at left, it
means that the power cable plug must be
unplugged from the outlet.
Avoid extended use at high volume.
The unit in combination with speakers may be
capable of producing sound levels that could
cause permanent hearing loss. Do not operate
for a long period of time at a high volume level,
or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the
ears, you should immediately stop using the unit
and consult an audiologist.
2
USING THE UNIT SAFELY
WARNING
WARNING
Do not allow foreign objects or liquids to enter the unit;
never place containers with liquid on the unit.
Read these instructions.
Do not place containers containing liquid on the
unit. Never allow foreign objects (e.g.,
flammable objects, coins, wires) or liquids (e.g.,
water or juice) to enter the unit. Doing so may
cause short circuits, faulty operation or other
malfunctions.
Keep these instructions.
Heed all warnings.
Turn off the unit if an abnormality or malfunction occurs.
Immediately turn the unit off, remove the power
cable from the power outlet and request
servicing by your retailer:
• The power cable or the plug has been
damaged; or
• If smoke or unusual odor occurs; or
• Objects have fallen into or liquid has been
spilled onto the unit; or
• The unit has been exposed to rain (or
otherwise has become wet); or
• The unit does not appear to operate normally
or exhibits a marked change in performance.
Follow all instructions.
Do not use the unit near water.
Clean only with dry cloth.
When children are nearby the unit, have adults
supervise them.
Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
When using the unit where children are, be
careful not to misoperate the unit.
Adults should always be around to provide
supervision and guidance.
Do not install near any heat sources such as
radiators, heat registers, stoves or other
apparatus (including this unit) that generates
heat.
Do not drop or subject to strong impact.
Protect the unit from strong impact.
(Do not drop it!)
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades and
a third grounding prong.The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your power outlet,
consult an electrician for replacement of the
obsolete power outlet.
WARNING
Do not share an power outlet with an unreasonable
number of other devices.
Do not force the power cables to share a power
outlet with an unreasonable number of other
devices.
Be especially careful when using extension
cords. The power rating (watts/amperes) for the
extension cord must not exceed total power of
all the used devices connected to the extension
cord's outlet.
Excessive loads can cause the insulation on the
extension cords to heat up and eventually melt
through.
Protect the power cable from being stepped on
or pinched particularly at plugs, convenience
receptacles and the point where they exit from
the unit.
Use attachments/accessories specified by the
manufacturer only.
Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer or sold with
the unit. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
Check the voltage of your local power oulet
The power cable should not be connected to a
direct current (DC).
Unplug the unit during lightning storms or when
unused for long periods of time.
Connect the unit to a power outlet that supports
a protective earthing connection.
Connect the unit to the speaker terminals using
cables (commercially available) or you may
consult an instructed person.
Use the unit at an altitude under 2,000
meters.
3
USING THE UNIT SAFELY
Do not expose the unit to dripping or splashing
water.
Do not place the containers filled with liquids
(vases, etc.) on the unit.
Refer all servicing to qualified service
personnel.
Servicing is required when the unit has been
damaged in any way, such as when the power
cable or plug is damaged, liquid has been
spilled or objects have fallen into the unit, the
unit has been exposed to rain or moisture, does
not operate normally or has been dropped.
Install the circuit breaker and keep it operable
while using the unit though you can shut out the
power to the unit with the power plug or the
couplers of the unit.
To reduce the risk of fire or electric shock, do
not expose the unit to rain or moisture.
These servicing instructions are for use by
qualified service personnel only. To reduce the
risk of electric shock, do not perform any
servicing other than that contained in the
operating instructions unless you are qualified
to do so.
CAUTION
Place in a well ventilated location.
Install the unit in a place with a good air
circulation.
Otherwise, it will not ventilate properly.
Handle the cables safely.
Prevent cables from being entangled.
Keep the cables where they are out of children's
reach.
Avoid stepping on the unit or placing heavy objects on
it.
Do not step on top of or place heavy objects on
the unit.
Do not connect or disconnect the power cable with wet
hands.
Do not plug/unplug the cables with wet hands.
Disconnect everything before moving the unit
Before moving the unit, disconnect the power
cable and all other cables connected to the
external devices.
Unplug the power cable from the power outlet before
cleaning.
Before cleaning the unit, turn it off and unplug
the power cable from the power outlet.
Unplug the power cable from the power
outlet before repairing.
Before repairing the unit, turn it off and unplug
the power cable from the power outlet.
Keep small items out of children's reach.
To prevent accidental ingestion, always keep
them out of small children's reach.
When not using the unit for a long time
When you leave your home for a long period of
time, turn off the power and remove the power
cable from the power outlet. This will prevent
unexpected accidents and fire.
4
IMPORTANT NOTES
■ Power Supply
• Collected dust in the power outlet may cause fire.
Clean the power outlet periodically.
• Do not connect the unit to the same power outlet that
is being used by an electrical device that is controlled
by an inverter or a motor (such as a refrigerator,
washing machine, microwave oven or air conditioner).
Depending on the way in which the electrical device is
used, power supply noise may cause the unit to
malfunction or may produce audible noise. If it is not
practical to use a separate power outlet, install a
power supply noise filter between the unit and the
power outlet.
• To prevent malfunction and equipment failure, always
make sure to turn off the power of all your equipment
before you make any connections.
■ Additional Precautions
• Use a reasonable amount of care when using the
unit's buttons, sliders or other controls, and when
using it's jacks and connectors. Rough handling can
lead to malfunctions.
• Do not strike or apply strong pressure to the display.
• When disconnecting all cables, grasp the connector
itself and never pull on the cable. This way you will
avoid causing shorts or damage to the cable's internal
elements.
• When you need to transport the unit, pack it in the box
(including padding) that it came in if possible.
Otherwise, you will need to use equivalent packaging
materials.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound
level to be extremely low or impossible to hear. For
information on cable specifications, contact the
manufacturer of the cable.
■ Placement
• Using the unit near other equipment containing large
power transformers may induce humming. To alleviate
the problem, change the orientation of the unit or
move it farther away from the source of interference.
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
• Noise may be produced if wireless communications
devices, such as cell phones, are operated in the
vicinity of the unit. Such noise could occur when
receiving or initiating a call or while conversing.
Should you experience such problems, you should
relocate such wireless devices so they are at a
greater distance from this unit or switch them off.
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, leave it inside an enclosed
vehicle or otherwise subject it to temperature
extremes. Excessive heat can deform or discolour the
unit.
• When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit.
Damage or malfunction may result if you attempt to
use the unit in this condition. Therefore, before using
the unit, you must allow it to stand for several hours
until the condensation has completely evaporated.
• Depending on the material and temperature of the
surface on which you place the unit, its rubber feet
may discolour or mar the surface. You can place a
piece of felt or cloth under the rubber feet to prevent
this from happening. If you do so, please make sure
that the unit will not slip or move accidentally.
• Do not put anything that contains water on the unit.
Also, avoid the use of insecticides, perfumes, alcohol,
nail polish, spray cans, etc., near the unit. Swiftly wipe
away any liquid that spills on the unit using a dry, soft
cloth.
■ On Bluetooth
• Before using the unit, make sure that no indoor
wireless station with a mobile body identifying system
is being used.
• If the radio frequency from the unit interferes the
indoor wireless station with a mobile body identifying
system, stop using this unit to perform procedures to
avoid further radio frequency interference.
• Keep the unit more than 22 cm away from people with
a medical device (heart pace maker implant,
defibrillator implant, etc.).
• Do not use the unit near medical devices or in medical
facilities. Radio waves or microwaves from Bluetooth
devices may affect medical electronics.
• Turn off Bluetooth devices (including the unit) in the
following places where;
-An Emergency door (controlled automatically) or fire
alarm is equipped.
-Inflamable gas is present (gas station, airplane, train,
etc.).
• Use Bluetooth devices within 10 m (line- of sight) from
the unit. The following conditions may shorten the
Bluetooth communication range.
-Other wireless LAN devices are being used near the
unit.
-A device generating electromagnetic radiation
(microwaves, etc.) is being used near the unit.
-There is an obstacle (person, wall, etc.) near the unit
or Bluetooth device.
• Since the same frequency is used by Bluetooth
devices and wireless LAN (IEEE802.11b/g),
microwaves may interfere the Bluetooth
communication resulting in invalid connection, speed
deterioration, noise, etc.
• All the wireless connections are not guaranteed with
this unit.
■ Maintenance
• For everyday cleaning, wipe the unit with a soft, dry
cloth or one that has been slightly dampened with
water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent.
Afterwards, be sure to wipe the unit thoroughly with a
soft, dry cloth.
• Do not use benzine, thinners, alcohol or solvents of
any kind, to avoid the possibility of discolouration and/
or deformation.
5
IMPORTANT NOTES
■ Copyrights / Licenses / Trademarks
any infringements of third-party copyrights arising
through your use of this product.
• Company names and product names appearing in this
document are registered trademarks of their
respective owners.
• The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by BMB international Corp. is under
license. Other trademarks and trade names are those
of their respective owners.
• It is forbidden by law to make an audio recording,
video recording, copy or revision of a third party's
copyrighted work (musical work, video work,
broadcast, live performance or other work), whether in
whole or in part, and distribute, sell, lease, perform or
broadcast it without the permission of the copyright
owner.
• Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard to
SPECIAL FEATURES
• High performance digital Karaoke amplifier with a
new switching power supply technology.
• Bluetooth function allows you to play music in
mobile phones.
• Seamless AC input voltage from 100 V to 240 V
makes this product compatible worldwide.
• Lightweight achieved by equipping new switching
power supply technology.
6
NAMES OF FRONT PANEL CONTROLS
FRONT PANEL
1
2
3
4
5
6
7
8
9
0
ab
c
d
e
1 MIC MASTER
Adjusts the entire volume of the microphones for
MIC 1 and MIC 2.
f
g
h
7 MASTER
Adjusts the entire volume level.
8 Master tone controls (LO/MID/HI)
Adjusts all tones (music and microphones) by
boosting low, middle or high frequency,
respectively.
2 Mic tone controls (LO/MID/HI)
Adjusts the tone of the microphone by boosting
low, middle or high frequency, respectively.
3 ECHO
Adjusts the entire echo and effect level of MIC 1
and MIC 2.
9 Power LED
Indicates the power status of the unit.
Lights in red: On
Off: The unit is powered off
4 Echo tone controls (LO/MID/HI)
Adjusts the echo effect by boosting low, middle
or high frequency, respectively.
0 POWER
Press the top to turn on the unit. Press the
bottom to turn off.
5 MUSIC
Adjusts the volume of the music source
connected to the audio input terminals.
6 Music tone controls (LO/MID/HI)
Adjusts the tone of music by boosting low,
middle or high frequency, respectively.
Turn on.
Turn off.
7
NAMES OF FRONT PANEL CONTROLS
a Mic volume control (MIC 1/MIC 2)
Adjusts the volume of MIC INPUT for MIC 1 and
MIC 2.
b GAIN-12dB
Press when connecting/disconnecting to MIC
INPUT to avoid squeaky noise.
c MIC INPUT (MIC 1/MIC 2)
Microphone input jacks.
d DELAY/REPEAT
DELAY: Adjusts the echo repetition intervals.
REPEAT: Adjusts the echo sustaining duration.
e ST
/MO
ST: Pans the echo with the speaker L/R. (Stereo
echo)
MO: Press once to make echo sound monoral
with L/R. (Monoral echo)
f SELECTOR
Selects the input source from INPUT A, INPUT
B (on the rear panel) or a Bluetooth device.
(P.15)
g Bluetooth LED (blue)
Indicates Bluetooth status. (P.14)
Lights: Pairing completed/connected
Flashes: Standby for paring/connecting
h BALANCE
Adjusts the balance between the output levels of
the left and right speakers.
8
NAMES OF REAR PANEL CONTROLS
REAR PANEL
1
SERIAL
No.
CAUTION
KARAOKE AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL NO.: DAH-100
AC: 100 - 240 V 50/60Hz 60W
Designed by BMB Internaonal Corp. Japan Assembled in China
INPUT B
INPUT A
L
L
PREOUT
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOSITURE
SUBOUT
L
R
L
SPEAKER
IMPEADANCE
4~8 OHMS
R
2
R
R
34 5 6 7
8
1 Bluetooth antenna
Raise when using Bluetooth. Adjust the angle as
necessary. (P.14)
6 PRE-OUT
Output terminals to connect to power amplifier or
mixer, etc. (P.10)
2 INPUT LEVEL (for INPUT B)
Adjusts the INPUT B by balancing the level of
inputs.
7 SUB-OUT
Connect the active subwoofer to output with low
frequency. (Low frequency is under 200 Hz.
P.10)
3 INPUT B (L/R)
Connect the audio output jacks of the music
source (Karaoke machine, etc.) here.
8 SPEAKER OUTPUT
Connect the speakers with it's normal
impedance of 4 Ω to 8 Ω. (P.12)
4 INPUT A (L/R)
Connect the audio output jacks of the music
source (Karaoke machine, etc.) here.
5 INPUT LEVEL (for INPUT A)
Adjusts INPUT A by balancing the level of
inputs.
9
SYSTEM CONNECTIONS
FRONT PANEL
MIC
REAR PANEL
DVD player Karaoke player
SERIAL
No.
CAUTION
KARAOKE AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL NO.: DAH-100
AC: 100 - 240 V 50/60Hz 60W
Designed by BMB Internaonal Corp. Japan Assembled in China
INPUT B
INPUT A
L
L
PREOUT
SUBOUT
L
R
L
SPEAKER
IMPEADANCE
4~8 OHMS
R
R
R
Power
amplifier
Active
subwoofer
Right
speaker
(P.12)
10
Left
speaker
(P.12)
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOSITURE
CONNECTIONS
■ How to connect the RCA pin plugs
When connecting the RCA pin plug cables, match
the colours. Connect the red cable to the red
terminal and the white cable to the white terminal.
Left
White
White
Red
Red
Right
■ How to connect speakers
1 Strip the speaker cable.
Strip about 15 mm of the outer
covering from the ends of the
cables by using pliers before
making connections.
2
Press and hold the red (and black) lever of
SPEAKER OUTPUT to open the terminal,
then insert the stripped end of the cable
while holding down the lever.
Red lever
Terminal
Stripped end
of the cable
3
Match +
wire with +
connector.
Match wire with connector.
SPEAKER
OUTPUT
Release the red (and black) lever to close the
terminal to fix the cable.
To connect CSH-200/CSH-W200 (not supplied),
see P.12.
Black lever
Notes:
• Make sure that the frayed wire (straggly
conductors) do not stick out of the terminals. If
the frayed wires come into contact with other
conductors, it may lead to failure of the unit.
• Use speakers with a nominal impedance of 4 Ω
to 8 Ω.
• If speakers with an impedance lower than 4 Ω
are connected, the protective circuit may go into
operation, hindering normal stereo playback.
11
CONNECTIONS
SPEAKER OUTPUT
■ Connecting to CSH-200 (not supplied)
SERIAL
No.
CAUTION
KARAOKE AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL NO.: DAH-100
AC: 100 - 240 V 50/60Hz 60W
Designed by BMB Internaonal Corp. Japan Assembled in China
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOSITURE
SPEAKER
IMPEADANCE
4~8 OHMS
CSH-200
CSH-200
DAH-100 (this unit)
■ Connecting to CSH-200 and CSH-W200 (not supplied)
CSH-200
CSH-200
SERIAL
No.
CAUTION
KARAOKE AMPLIFIER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MODEL NO.: DAH-100
AC: 100 - 240 V 50/60Hz 60W
Designed by BMB Internaonal Corp. Japan Assembled in China
WARNING
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOSITURE
SPEAKER
IMPEADANCE
4~8 OHMS
CSH-W200
DAH-100 (this unit)
Notes:
• Turn off the unit before connecting speaker
cables.
• Connect the same terminals as shown below.
- A red terminal (+) of the unit and red terminal
(+) of the speaker
- A black terminal (-) of the unit and black
terminal (-) of the speaker
• If you connect the terminals in a wrong way, the
sound will become strange and the bass sound
becomes very small, causing a malfunction to the
speaker and unit.
12
CSH-W200
BASIC OPERATION
4
1
5
3
2
■ How to play the unit
1
Turn on the music source (Karaoke machine,
etc.).
2
Turn on the unit. (1)
3
Connect the microphone plug to MIC INPUT
while pressing and holding GAIN-12dB. (2)
4
Set the music source to play mode.
■ Notes when using microphones
• Keep the microphone approx. 5 to 10 cm away
from your mouth.
• To make the voice sound clear, maintain a proper
space between the microphone head and holding
position on the grip.
• Do not cover the lower wind screen of the
microphone as this may muffle the bass sound
and hinder proper vocal reproduction. It may also
cause howling.
(1) Keep a distance
(approx. 5 to 10 cm).
(2) Keep enough
distance between
your hand and
microphone head.
PLAY
5
Turn up MUSIC and MASTER to the required
level. (3)
6
To balance the volume of microphones and
music, turn MIC MASTER and the mic
volume controls. (4)
7
Turn ECHO to adjust echo as necessary. (5)
Now that the required settings are finished, you
can operate the music source.
13
USING BLUETOOTH DEVICES
3
You can enjoy playing music by connecting this unit
with a Bluetooth device (mobile phones, tablets,
etc.).
■ How to install the unit
1
Bluetooth ON
Install as follows:
4
Within
10 m
2
Search Bluetooth devices by operating the
Bluetooth device.
Select "BMB DAH-100" from the search
results.
BMB DAH-100
AAAA
BBBB
Raise the Bluetooth antenna. (P.9)
The Bluetooth indicator of this unit lights and
pairing is complete.
Lights: Pairing completed/connected
Flashes: Standby for pairing/connecting
INPUT B
INPUT A
PREOUT
L
L
L
R
R
R
SUBOUT
R
SPEAKER
IMPEADANCE
4~8 OHMS
Notes:
• Do not install this unit and Bluetooth device on
metal plates (steel, etc.).
• Do not cover the unit with cloth.
• Install the Bluetooth device within a 10 m line-ofsight-distance from this unit. (Make sure there
are no obstacles.)
Notes:
• If you turn off the unit while pairing (or
connecting), the unit automatically connects to
the Bluetooth device after the unit is turned on.
• Even if you turn off the unit while pairing, the unit
remembers the Bluetooth device that the unit
connected with last time.
• Make sure the pairing is completed in the
Bluetooth device.
• If the pairing fails, start over from step 2.
• For further details, see the owner's manual of the
Bluetooth device.
■ How to pair this unit with the Bluetooth
device
You can connect one device with this unit.
1
Turn on the Bluetooth device.
Power
on
2
Press POWER to turn on this unit.
The Bluetooth indicator flashes. (Standby for
pairing or connecting with a Bluetooth device.)
14
USING BLUETOOTH DEVICES
■ How to play music
1
Complete pairing with the Bluetooth device.
(P.14)
2
Set SELECTOR to Bluetooth.
3
Start playing by operating the Bluetooth
device.
4
Rotate MUSIC and MASTER to adjust the
volume.
■ How to disconnect Bluetooth connection
Set Bluetooth to off on the Bluetooth device.
15
TROUBLESHOOTING
Trouble
Possible cause
Remedy
No power is supplied to the
unit.
• The power plug is disconnected from
the power outlet.
• Firmly connect the power plug to the
power outlet.
No sound even though the
unit is turned on.
• MUSIC volume control or mic volume
controls may be set to minimum.
• Adjust for the proper volume level.
• The speaker cables are disconnected.
• Connect the speaker cables properly.
• The speaker cables are damaged.
• Replace the cables.
• The speaker cables are short circuited.
• Replace the cables.
• Music source is disconnected from the
unit.
• Connect the external device to the unit
properly.
• The microphone switch is turned off.
• Turn it on.
• The microphone cable is damaged.
• Repair or replace with another one.
• The microphone jack is disconnected.
• Connect it properly.
No audio is played even
though a signal is input from
the music source.
• Different input source is selected.
• Turn the input source selecting knob
to the correct source.
Cannot pair with or connect
to the Bluetooth device via
Bluetooth.
• Other device is already paired with or
connected to this unit already.
• Turn off Bluetooth of the Bluetooth
device.
• The distance between the Bluetooth
device and this unit is too long.
• Install this unit within 10 m from the
Bluetooth device. (P.14)
• The Bluetooth device does not
support A2DP.
• Pair with the device which supports
A2DP.
• There are other devices (microwave,
wireless LAN devices, etc.) that
generates 2.4 GH frequency band of
radio waves nearby.
• Keep this unit away from these
devices.
• SELECTOR is not set to Bluetooth.
• Set the SELECTOR to Bluetooth. (P.8,
15)
• Bluetooth is disconnected from the
Bluetooth device.
• Connect (or pair with) the Bluetooth
device to the unit via Bluetooth. (P.14)
• There are other devices (microwave,
wireless LAN devices, etc.) that generates 2.4 GH band of radio waves
nearby.
• Keep this unit away from these
devices.
• Bluetooth of the Bluetooth device is
disabled.
• Check if the Bluetooth setting of the
Bluetooth device is correct.
• This unit is not set to the connecting
device in the Bluetooth device.
• Select "BMB DAH-100" from the
search results of the Bluetooth device.
(P.14)
• The volume of the Bluetooth device is
too low.
• Turn up the volume of the Bluetooth
device.
No sound from the
microphone even though
music is played.
No sound or sound is
breaking up when using
Bluetooth.
16
AFTER-SALE SERVICING
(1)If this unit is found to be defective, your local
dealer will repair or replace the defective parts
for a charge at your request.
(2)Before you request the repair to your local
dealer, see the "TROUBLESHOOTING" section
and check it again.
For dealers:
If you are requested the after-sale service from
your customer, check the following contents first.
• Confirm the details of the accident.
• Check all cables and connections.
• Clean the lens or disc of the connected
equipment.
• Cautions of operation and instructions for using
the system to your customer.
MANNERS FOR CUSTOMERS
• Karaoke, though enjoyable, could be noisy at
times unless a proper time or place are chosen.
Please be sufficiently thoughtful of your
neighbours.
• Karaoke volume could be high if you are
concentrating on your in singing. Even a small
sound can be distracting especially during a quiet
night. Therefore, please give special attention to
audio levels especially at night. To make sure no
sound leaks to your neighbours, it is advisable to
close your windows and observe proper manners
to maintain a pleasant living environment.
COPYRIGHT
• Broadcasting, music sources such as recorded
music tapes, DVDs, video tapes, CDs and so on
are strictly protected under copyright law.
• You need to have permission from the copyright
holder to use, distribute, rent these music
sources for commercial use or sell dubbed media
to other people except when enjoying these
sources by yourself.
ABOUT THE PRODUCT
• This unit is produced by harmless materials in
conformity with relevant product safety laws.
17
SPECIFICATIONS
■ General
Model name
Audio output power
Total harmonic distortion (1 kHz, -3 dB, 8 Ω)
Speaker impedance
DAH-100
100 W+100 W (4 Ω to 8 Ω)
1%
MIC 1/MIC 2: 6 mV/600 kΩ
INPUT A/INPUT B: 300 mV/22 kΩ
SUB-OUT: 7.0 V/1 kΩ
PRE-OUT: 5.0 V/1 kΩ
MIC 1/MIC 2: 50 Hz to 20 kHz ±3 dB
MUSIC: 20 Hz to 20 kHz ±3 dB
MASTER/MUSIC
LO: ± 8 dB(100 Hz)
MID: ± 3 dB(2 kHz)
HI: ± 8 dB(10 kHz)
MIC/ECHO
LO: ±13 dB(100 Hz)
MID: ±6 dB(1 kHz)
HI: ±13 dB(10 kHz)
4 Ω to 8 Ω
Version
RF output power
Maximum communication range
Supported profile
Supported codec
Ver.4.0
Class 2
10 m without obstructions
A2DP
SBC, AAC
Audio input (sensitivity/impedance)
Audio output (level/impedance)
Frequency response
Tone control response
■ Bluetooth
■ Power Supply/Others
Power supply
Power consumption
AC 100 V to 240 V 50/60 Hz
60 W
420(W)×169(H)×341(D) mm
304 mm
341 mm
159 mm
169 mm
Dimensions (W×H×D)
290 mm
420 mm
Weight
Accessories
4.9 kg
Owner's manual (1), Registration Card (1)
18
19
BMB International Corp.
www.bmb.com
English
For the Instruction in other languages, please go to the official website www.bmb.com to download.
Chinese
Indonesian
tentang buku panduan dalam bahasa-bahasa lain,silakan download di situs resmi www.bmb.com.
Vietnamese
xin đến website www.bmb.com để tải về Bản hướng dẫn bằng ngôn ngữ khác.
201611
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement