Amino Remote Control Programming Guide

Amino Remote Control Programming Guide
Nebula Potenza ST.fm Page 1 Monday, October 15, 2007 4:55 PM
Potenza ST
Universal Remote Control
Users Guide
PREPROGRAMMED FOR YOUR SET-TOP BOX
Table of Contents
INTRODUCTION.................................................................................................................................................................3
FEATURES AND FUNCTIONS..........................................................................................................................................4
Key Charts .......................................................................................................................................................................5
Device Table ...................................................................................................................................................................7
INSTALLING BATTERIES.................................................................................................................................................8
PROGRAMMING DEVICE CONTROL..............................................................................................................................8
SETTING UP A COMBO UNIT .........................................................................................................................................9
SEARCHING FOR YOUR CODE........................................................................................................................................9
CHECKING THE CODES..................................................................................................................................................10
USING LEARNING...........................................................................................................................................................10
Learning Precautions......................................................................................................................................................10
Programming a Learned Key..........................................................................................................................................10
Deleting a Single Learning Key.....................................................................................................................................11
Deleting All Learned Keys in a Specific Mode..............................................................................................................11
PROGRAMMING CHANNEL CONTROL LOCK............................................................................................................11
Unlocking Channel Control............................................................................................................................................11
Locking Channel Control to STB...................................................................................................................................11
CHANGING VOLUME LOCK .........................................................................................................................................12
Unlocking Volume Control for a Single Device (Individual Volume Unlock)..............................................................12
Unlocking All Volume Control (Global Volume Unlock)..............................................................................................12
Locking Volume Control To One Mode (Global Volume Lock)....................................................................................12
PROGRAMMING ID LOCK .............................................................................................................................................12
PROGRAMMING MACRO KEYS ...................................................................................................................................13
Programming a Macro Key............................................................................................................................................13
Clearing a Macro Key....................................................................................................................................................13
USING THE MASTER POWER KEY ..............................................................................................................................13
Programming the Master Power Key..............................................................................................................................13
Using the Master Power Key..........................................................................................................................................14
Clearing the Master Power Key......................................................................................................................................14
RE-ASSIGNING DEVICE KEYS .....................................................................................................................................14
CLEARING CUSTOM PROGRAMMING........................................................................................................................14
TROUBLESHOOTING......................................................................................................................................................15
FCC NOTICE......................................................................................................................................................................15
ADDITIONAL INFORMATION........................................................................................................................................16
MANUFACTURER’S CODES ..........................................................................................................................................17
Setup Codes for Audio Amplifiers.................................................................................................................................17
Setup Codes for Audio Receivers...................................................................................................................................17
Setup Codes for Audio Accessories................................................................................................................................18
Setup Codes for Cable Boxes/Converters.......................................................................................................................18
Setup Codes for Cable/DVR/PVR Combos....................................................................................................................18
Setup Codes for DVD Players........................................................................................................................................19
Setup Codes for DVD Recorders....................................................................................................................................20
Setup Codes for DVD Combos .....................................................................................................................................21
Satellite Receivers and DVR/PVR Systems...................................................................................................................21
Setup Codes for DVR/PVR Systems..............................................................................................................................21
Setup Codes for TVs......................................................................................................................................................21
Setup Codes for TVs (DLP)...........................................................................................................................................25
Setup Codes for TVs (HDTV)........................................................................................................................................25
Setup Codes for TVs (LCD)...........................................................................................................................................25
Setup Codes for TV/DVD Combos................................................................................................................................26
Setup Codes for TV/VCR Combos.................................................................................................................................27
Setup Codes for TV/VCR/DVD Combos.......................................................................................................................27
Setup Codes for VCRs...................................................................................................................................................27
2
INTRODUCTION
The Potenza ST Universal Remote Control by Universal Electronics is our latest generation universal remote control. Its
sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into
one easy-to-use product. Moreover, its packed with advanced features such as:
•
•
•
•
•
•
•
•
•
•
Preprogrammed control to operate the set-top box supplied by your service provider
Dedicated keys to control popular functions on your DVR/PVR (Digital/Personal Video Recorder)
Programmable Master Power key for master on/off control of your home entertainment equipment with a single
keystroke
Programmable Macro Keys to allow you to activate certain keys in a specific order
Channel Lock to lock channel selection only to the cable converter
Volume Lock to lock volume controls to one mode or individual modes
Device Key Re-Assignment to remotely control a second (duplicate) device
Code Search to help program control of older or discontinued components
Color-coded keys to quickly locate popular functions
Code library for popular video and audio devices
Before using the product, you will need to install the enclosed batteries and also perform some programming to operate
the specific home entertainment devices you wish to control.
Please follow the instructions detailed in this manual to set up the unit and then start enjoying your new remote control.
3
TV, AUD, DVD, VCR, STB
Use one remote to control
mul/ple devices.
Control the Remote
Setup
Use for programming
sequences of devices
controlled by the remote.
REW, PLAY, FFWD, STOP,
PAUSE
In STB mode, these control the
DVR/PVR func/ons. In other
modes, these can control a
VCR, DVD Player or PVR.
Menu
Displays applica/ons including
the configura/on menu.
Guide
Opens the Interac/ve Program
Guide.
Day +/Jump ahead or back one day in
the Interac/ve Program Guide.
Red, Green, Yellow, Blue
Access addi/onal features on
your set-top box.
Vol +/Raise or lower the volume.
Mute
Turn the sound off or on.
FAV
View your favorite channels.
Input
In TV control mode, would
change the input of the device
you are controlling.
* If Available
Power
Turn on/off a selected device.
Live
Return to watching live TV.
List
Display a list of recorded
shows on your PVR/DVR
set-top box.
Info
Display the current channel
and program informa/on.
Press again for more detail.
Arrow Keys/OK
Navigate and select onscreen
choices.
Exit
Exit the current screen.
Page +/Page up or down in menu
screens & Interac/ve Program
Guide.
Channel +/Changes to the next higher or
lower channel.
On Demand
Access video on demand
services.
Last
Recall the last channel you
were watching.
Number Keys (0-9)
Directly select a channel.
Key
Function
INPUT in STB mode is used to
view other video sources ( A or B ).
In other modes, use INPUT to
switch between the source inputs on
the device you are controlling.
All other keys not mentioned in this
manually, currently, have no
assigned function
Device Table
NOTE: Please refer to the table below when performing the instructions in “Programming Device
Control” on page 8 or “Setting Up a Combo Unit” on page 9. After programming, the Potenza ST
Universal Remote Control will be able to control the following types of devices:
Device Key
Controls these types of
devices
Television.
Audio Amplifier, Tuner, or
Receiver
DVD Player, or extr a VCR,
TV/VCR Combo or PVR
Can be programmed as an
additional TV/VCR/DVD or
VCR
Set top box
7
INSTALLING BATTERIES
1. On the back of the remote control, push the tab and lift off the battery cover.
2. Locate the two (2) enclosed AA batteries. Match the + and - marks with those in the battery case, then insert
them.
3. Align the covers keys with the cases holes and press the cover ba ck into place. The tab should click when the
cover is locked.
4. Test the remote control by pressing any mode key (e.g. , TV ). If the batteries are inserted correctly, the LED (red
light) will blink once.
NOTE: When batteries need replacement, the remote control will cease to operate. Replace the batteries
and the unit will be restored to its full functionality, complete with your favorite settings.
PROGRAMMING DEVICE CONTROL
The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your television
service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices
other than the default brands, perform the following steps; otherwise skip this section.
NOTES: For control of a Combo device (for example, a TV/VCR combo), skip this section and per-form
the instructions on “Setting Up a Combo Unit” on page 9. Also refer to “Device Table” on page 7 to find
out which devices can be programmed onto each device key. If you have another brand of set-top box you
would like to control, you’ll need to unlock the STB ID Lock before changing the set-top box code (see
“Programming ID Lock” on page 12).
1. Turn on a device and, if applicable, insert video media, (e.g., cassette or disc).
NOTE: Please read steps 2 through 5 completely before proceeding. Highlight or write down the codes
and device you wish to program before moving on to step 2.
2. On the remote control, press a device key once (i.e., VCR, DVD, AUD, TV, or STB ); it will blink once.
3. Press and hold
SETUP until the selected mode key blinks twice, then release SETUP .
4. Use the “Manufacturer’s Codes” starting on page 17) to locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
8
NOTE: If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 4 and try
entering the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat
steps 2 through 4, trying each code for your brand until you find one that works. If it still does not respond, try
searching for the code (see “Searching for Your Code” on page 9).
NOTE:
If the device does not have a POWER key (e.g., DVD and VCR) , press the (Play) key.
6. Repeat steps 1 through 5 for each device you want the remote control to operate. For future reference, write down
each working device code in the boxes below.
TV Code
AUD Code
DVD Code
AUD Code
STB Code
Device Type:
Code
SETTING UP A COMBO UNIT
If you own a combo unit such as a TV/VCR Combo or a TV/DVD Combo, you need to follow special steps to set it up.
Perform the following instructions to control combo device:
1. For a TV/VCR Combo, turn on your TV/VCR Combo and insert a video cassette. (For a TV/DVD Com bo, inser t
a DVD).
2. On the remote control, press
VCR once; it will blink once. Then press and hold SETUP until the VCR
key blinks twice.
3. Use the “Manufacturer’s Codes” starting on page 17 to locate the brand name and enter the first four-digit code
for your combo device (for example, TV/VCR). If you perform this procedure correctly, the VCR key w ill blink
twice.
NOTE: If the VCR key did not blink twice after entering the codes last digit, repeat steps 2 through 3
and try entering the same code again. If you’ve located a setup code that works for your combo device (for
example, a TV/VCR Combo) and a separate TV code is also listed, you’ll need to program this code into
the remote control to access volume control ( see “Programming Device Control” starting on page 8).
4. Aim the remote control at your combo device (for example, TV/VCR Combo) and press POWER once. The
device should turn off. If it does not respond, repeat steps 2 through 3, trying each code listed for your brand until
you find one that works. If it still does not respond, try searching for the code (“Searching for Your Code” starting
on page 9).
5. For future reference, write down each working device code in the boxes below:
TV Code
TV/VCR Code
TV/DVD Code
Device Type:
Code
SEARCHING FOR YOUR CODE
If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the
codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a
code for your TV:
1. Turn on your TV.
2. On the remote control, press
TV once; it will blink once. Then press and hold SETUP until the TV key
blinks twice.
3. Type 9 9 1 . The TV key will blink twice.
4. Aim the remote control at the TV and press POWER once.
5. Press and release the
CH+ key continuously, then stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device,
starting with the most popular code first.
6. Press
POWER . The TV should turn on, then press SETUP once to lock in the code. The LED will blink
9
twice to indicate that the code is saved.
NOTE: If the TV does not turn on during step 6, then slowly press and release CH- to go back through
the codes, then press SETUP when the TV turns on.
7. To search for the codes of your other devices, repeat steps 1 through 6, but substitute the appropriate key (e.g.,
TV, AUD, DVD, AUX, or STB ) for the device you are searching for.
CHECKING THE CODES
If you have set up your remote control by searching for your device code (previous section), you may need to find out
which four-digit code is operating your equipment. For example, to find out which code is operating your TV:
1. On the remote control, press TV once; it will blink once. Then press and hold SETUP until the TV key blinks
twice.
2. Enter
9 9 0 . The TV key will blink twice.
3. To view the code for the first digit, press 1 once. Count the number of times the TV key blinks (e.g., 3 blinks =
3) and write down the number in the left most TV Code box above.
NOTE:
If a code digit is 0, the selected mode key will not blink.
4. Repeat step 3 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4
for the fourth digit. Finish writing down the code in the TV Code boxes above
5. To check for other device codes, repeat steps 1 through 4, but substitute the appropriate key (e.g., TV, AUD,
DVD, AUX, or STB ) for the device you are checking. Write down the codes in the appropriate boxes above.
USING LEARNING
The Potenza ST Universal Remote Control includes a Learning feature (not available on all models) so you can add
functions that are unique to your home entertainment devices (e.g.,VCR Tracking Up or Down).
However, there are some considerations.
Learning Precautions
• Your original remote controls must be in working order for learning to work properly.
• Learned keys are mode-specific, so each one can store a unique function for each mode.• Do not use the following
keys for learning:
Device Keys, SETUP, Record (•), Tune-In Keys .
• Learning capacity is approximately 16 to 25 keys, depending on the code being learned.
• Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other
unusual formats.
• For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent
lights.
• Please have your original remote controls NOTE: handy before programming learning.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold
SETUP until the last-selected mode key blinks twice, then press 9 7 5 .
NOTE: If the LED displays one long flash instead, either your batteries are low, or the Potenza ST
Universal Remote Control has a memory fault.
2. Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ) to assign a mode for learning.
3. Press the desired key on the Potenza ST once to store the feature to be learned.
4. Place the Potenza ST Remote Control head-to-head (about 2" apart) from your original remote control . Also
locate the key (on your original remote control) that you want the Potenza ST Universal Remote Control to learn.
5. On the original remote, press and hold the key to be learned. The Potenza ST Remote Control’s LED will blink
10
rapidly, then turn off. Continue holding the key on the original remote until the LED blinks twice.
NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again
until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit
programming and review the “Learning Precautions” on the previous page. If needed, also see
“Troubleshooting” on page 15. After review, start programming again at step 1.
6. Repeat steps 2 through 5 for another mode and/or key or press and hold SETUP until the active mode key LED
blinks twice to exit programming.
Deleting a Single Learning Key
This process returns the key to its original programming for the mode you select. You can also delete learned
programming by teaching a different function to the key (see “Programming a Learned Key” on page 10)
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
2. Press a mode key once (i.e., TV, AUD, DVD, AUX, or STB ). The LED on the selected mode key will blink
once.
3. Press the key containing the learned function to be deleted twice. The active MODE key will blink twice.
4. Repeat steps 2 through 3 for another key or press and hold SETUP to exit programming.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 15 seconds pass between key presses, the remote exits programming.
1. Press and hold SETUP until the last-selected mode key blinks twice, then press 9 7 6 .
2. Press a mode key twice (i.e., TV, AUD, DVD, AUX, or STB ) to clear all the learned keys for that mode. The
mode key LED blinks twice.
3. Repeat step 2 for another mode or press and hold SETUP to exit programming.
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities are locked to the set-top box. The affected keys* are 1
through 0 , CH+ , CH- , and LAST . This will guarantee that you do not inadvertently change a channel on your TV or
VCR. However, you can deactivate this feature to allow full access to these keys in the TV and VCR modes.
*NOTE:
This feature does not affect the AUD mode.
Unlocking Channel Control
1. On the remote control, press STB once; it will blink once. Press and hold SETUP until the STB key blinks
twice.
2. Enter 9 7 3 . The STB key will blink twice.
3. Press CH- once. The STB key will blink four times.
Now the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.
Locking Channel Control to STB
1. On the remote control, press
STB once; it will blink once. Press and hold SETUP until the STB key
blinks twice.
2. Enter 9 7 3 .The STB key will blink twice.
3. Press CH+ once. The STB key will blink twice.
Now, regardless of what mode you select (except AUD ), the channel keys will only change channels on your set-top
box.
11
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through the device identified as having your primary speaker(s),
regardless of which mode you are using. On the Potenza ST Remote Control, Global Volume Lock is set to TV , so you
can control TV volume while in the TV, DVD, AUX or STB mode. You can perform Individual Volume Unlock on a
selected device to set its volume control for independent operation.
NOTE:
The audio mode’s ( AUD ) volume controls are active regardless of Volume Lock settings.
However, if you lock the volume controls to the AUD mode, you will have control of the audio device’s
volume in all other modes (i.e., TV, DVD , AUX, and STB ). This can be an advantage if, for example,
you always listen to home entertainment devices through your receiver’s speakers.
Unlocking Volume Control for a Single Device (Individual Volume Unlock)
1. Assuming Global Volume Lock is active, select a mode on the remote control that you want to unlock (e.g.,
STB) and press it once. Next, press and hold SETUP until the device key blinks twice.
2. Enter 9 9 3 . The last-selected device key will blink twice.
3. Press
VOL- once. The last-selected device key will blink four times.
4. Repeat steps 1 through 3 for each device you want volume to be unlocked.
Now, after you select a device that has volume unlocked (e.g., STB ), pressing VOL+ , VOL- ,or MUTE , will control
only that device’s volume.
Unlocking All Volume Control (Global Volume Unlock)
NOTE:
Performing these instructions will set independent volume control for all programmed devices.
1. On the remote control, press and hold
SETUP until the last-selected device key blinks twice.
2. Enter
9 9 3 . The last-selected device key will blink twice.
3. Press
VOL+ once. The last-selected device key will blink four times.
Locking Volume Control To One Mode (Global Volume Lock)
NOTE: The audio mode’s volume controls are active regardless of Volume Lock setting s. However, if
you lock the volume controls to the AUD mode, you will control the audio device’s volume in all other
modes (i.e., TV, DVD, AUX or STB ). This can be an advantage if, for example, you always listen to
home entertainment devices through your receiver’s speakers.
1. On the remote control, press and hold
SETUP until the last-selected device key blinks twice.
2. Enter
9 9 3 . The last-selected device key will blink twice.
3. Select a mode (e.g.,
TV or AUD ) which you want to use to control the volume. The selected device key will
blink twice.
Now, when you press VOL+ , VOL- ,or MUTE , the volume of the selected device (e.g., TV ) is controlled regardless
of mode.
PROGRAMMING ID LOCK
The Potenza ST Universal Remote Control is locked at the factory to operate your service provider’s set-top box.
However, if you have another brand or model of set-top box or satellite service that you would like to control, then you’ll
need to perform the following steps to unlock the ID Lock, enter a new manufacturer’s code, and lock the ID Lock again.
1. Turn on the set-top box.
2. On the remote control, press
STB once; it will blink once. Then press and hold SETUP until the STB key
blinks twice.
3. Enter
9 8 2 . The STB key will blink four times, indicating ID Lock is unlocked.
4. Perform the instructions under “Programming Device Control” on page 8 to program device control for the
desired cable converter or satellite receiver.
12
When you are done, perform steps 5 and 6 on this page to again lock the ID Lock.
5. On the remote control, press
STB once; it will blink once. Then press and hold SETUP until the STB key
blinks twice.
6. Enter
9 8 2 . The STB key will blink twice, indicating ID Lock is again locked.
PROGRAMMING MACRO KEYS
The Potenza ST Universal Remote Control includes two macro keys (located directly below the MUTE and LAST
keys). Macro keys allow you to set up key macros to activate certain keys in a specific order. For example, you can set up
a key macro to change the channels on your TV, raise or lower the volume, and start recording on your VCR, all with the
touch of one key. If you want to change the macros stored in a previously-programmed macro key, you’ll need to clear the
key first (see “Clearing a Macro Key” on page 13).
Programming a Macro Key
1.
2.
3.
4.
On the remote control, press and hold
SETUP until it blinks twice.
Enter
9 9 5 . The SETUP key blinks twice.
Select a macro key (for example,
F1 ) and press it once.
Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its
volume, press the TV mode key once, followed by pressing the VOL+ key once.
NOTE: You can program up to 15 key presses into one macro.
5. Press and hold
SETUP until it blinks twice.
6. To add another macro, repeat steps 1 through 5, substituting the new key sequence to be added in step 4.
NOTE:
Programming more than five macros on the same macro key overwrites previous settings.
Clearing a Macro Key
1. On the remote control, press and hold
SETUP until it blinks twice.
2. Enter
9 9 5 . The SETUP key blinks twice.
3. Press the macro key you want to clear once.
4. Press and hold
SETUP until the active mode key blinks twice.
This macro key is now clear and ready for reprogramming (see “Programming a Macro Key” on page 13). If desired,
repeat these to clear another Tune-In key.
USING THE MASTER POWER KEY
The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to five of your home
entertainment devices on or off with a single key press.
NOTE: MASTER POWER (POWER)
only works in the STB mode. If it is not programmed, only
the set-top box will turn on or off. In any other mode, pressing MASTER POWER (POWER) once will
turn the selected device on or off.
Programming the Master Power Key
1.
2.
3.
4.
On the remote control, press and hold
SETUP until the last-selected device key blinks twice.
Enter
9 9 5 . The last-selected device key blinks twice.
Press
POWER once.
For the first device you want in the power on sequence, press a device key (e.g., STB ) once. Then press
POWER once. For the second device in the power sequence, press its key once (e.g, TV ). Then press
POWER .
5. Repeat step 4 up to four more times to add the second, third, fourth, and fifth device, as desired.
6. To save the settings and exit the program:
a. Press STB once.
13
b. Press and hold
SETUP until the STB key blinks twice.
Using the Master Power Key
1. After programming, point the remote control at the devices. Press STB once.
2. Press
POWER once to sequentially turn the programmed home entertainment devices on or off.
You will see the devices turn on or off according to the programmed sequence.
Clearing the Master Power Key
1.
2.
3.
4.
On the remote control, press and hold
SETUP until the last-selected device key blinks twice.
Enter
9 9 5 . The last-selected device key blinks twice.
Press and release
POWER .
Press and hold
SETUP until the STB key blinks twice.
RE-ASSIGNING DEVICE KEYS
The Potenza ST Universal Remote Control can be set up to control a second device of an already-assigned type. For
example, to have the unit control a TV, a set-top box, and two audio devices (for example, two audio receivers), reassign the unused AUX key to operate the second audio device as follows:
NOTE: AUX is preset at the factory to control an RCA VCR. Performing the steps below will over-write
those settings.
1. On the remote control, press
VCR once; it will blink once. Then press and hold SETUP until the VCR
key blinks twice.
2. Enter
9 9 2 . The VCR key will blink twice.
3. Press
AUD once, then press VCR once. The VCR key will blink twice.
The VCR key is now ready to be programmed for your second audio device. See “Programming Device Control” on
page 8. To re-assign other device keys, repeat these and substitute the key sequence using the following chart:
NOTE:
Only one device can be assigned to an unused device key at a time.
To Re-Assign
Perform Key Sequence
AUX as 2nd
AUX -> SETUP -> 9 -> 9 -> 2 -> AUD -> AUX
AUD key
AUX as 2nd
AUX -> SETUP -> 9 -> 9 -> 2 -> TV -> AUX
TV key
AUX as 2nd
AUX -> SETUP -> 9 -> 9 -> 2 -> DVD -> AUX
DVD key
AUX as 2nd
AUX -> SETUP -> 9 -> 9 -> 2 -> STB -> AUX
DVD key
AUX back to
AUX -> SETUP -> 9 -> 9 -> 2 -> AUX -> AUX
AUX key
To re-assign another unused device key, substitute it for the AUX key above and then perform the sequence. For
example, to re-assign an unused AUD key as a second DVD key, perform
AUD -> SETUP -> 9 -> 9 -> 2 -> DVD -> AUD
When a re-assignment is done, the selected device key (e.g., AUD ) will blink twice to confirm your choice. At that time,
you will need to program device control (see “Programming Device Control” on page 8).
CLEARING CUSTOM PROGRAMMING
The Potenza ST Remote Control contains a Custom Programming Reset program. You can use it to remove all custom
programming, except your setup codes and reassigned device keys.
IMPORTANT: Executing this program will erase all custom settings for Volume Lock, Learned Keys,
Tune-In Keys, and Channel Lock. However, your device programming remains.
14
1. On the remote control, press and hold
SETUP until the last-selected device key blinks twice.
2. Enter
9 8 0 . The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all
custom programming is cleared.
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA batteries (see “Installing Batteries” on page 8).
PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are
within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing
properly.
SOLUTION: Try all listed codes for the device brand being set up. Make sure all devices can be operated with an
infrared remote control.
PROBLEM: TV/VCR Combo does not respond properly.
SOLUTION: Use the VCR codes for your brand. Some combo units may require both a TV code and a VCR code for
full operation (see page 9).
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions under “Changing Volume Lock” on page 12.
PROBLEM: PLAY and STOP keys do not work on a Motorola DCT-2000 cable converter.
SOLUTION: Re-program the STB key for cable code 0476 (see “Programming Device Control” on page 8).
PROBLEM: Tried Search Method and still could not find a working code.
SOLUTION: Try the Search Method again after clearing out the device key as follows:
a. Press and hold SETUP until device key blinks twice.
b. Enter 9 9 2 .
c. Press and release the device key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or Sharp TV/VCR Combo.
SOLUTION: For power on, these products require programming TV codes on the remote control. For Sony, use TV
code 0000 and VCR code 0032. For Sharp, use TV code 0093 and VCR code 0048.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In
order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
15
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the
user’s authority to operate this equipment.
ADDITIONAL INFORMATION
This product does not have any user-serviceable parts. Opening the case, except for the battery cover, may cause
permanent damage to your Potenza ST Universal Remote Control.
For help via the Internet, visit us at: www.urcsupport.com
©Copyright 2006 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed,
stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical,
magnetic, optical, manual, or otherwise, without prior written permission of Universal Electronics Inc.
M6695
09/07
16
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers
Adcom
Bose
Durabrand
Elan
GE
Harman/Kardon
JVC
Left Coast
Lenoxx
Luxman
Marantz
McIntosh
Nakamichi
NEC
Optimus
Parasound
Philips
Pioneer
Polk Audio
RCA
Realistic
Sansui
Shure
Sony
Soundesign
Victor
Wards
Yamaha
0577, 1100
0674
1561
0647
0078
0892
0331
0892
1561
0165
0892, 0321
0251
0321
0264
0395, 0823
0246
0892
0823
0892
0823
0395
0321
0264
0689, 0815, 1126
0078, 0211
0331
0078, 0211
0354, 0133
Curtis Mathes
Daewoo
Delphi
Denon
Fisher
Gateway
Go Video
Harman/Kardon
Hitachi
Integra
JBL
JVC
Kenwood
KLH
Koss
Lasonic
LG
Linn
Liquid Video
Magnavox
Marantz
Mitsubishi
Norcent
Nova
Onkyo
Optimus
Setup Codes for Audio Receivers
Oritron
Panasonic
ADC
Aiwa
Philips
Akai
Alco
Amphion Media Works
AMW
Anam
Apex Digital
Arcam
Audiotronic
Audiovox
B&K
BK
Bose
Cambridge Soundworks
Capetronic
Carver
Classic
Coby
0531
1405, 0189, 0121, 0405,
1243, 1388, 1641
1512
1390
1563, 1615
1563, 1615
1609, 1074
1257, 1430, 1774
1120
1189
1390, 1627
0701, 0820, 0840
0702
1229, 1629, 1841, 1933
1370
0531
1189, 0189
1352
1389
Pioneer
Polaroid
Polk Audio
Proscan
RCA
Rio
Samsung
Sansui
Sanyo
Sharp
Sharper Image
Sherwood
Sirius
Sonic Blue
0080
1250
1414
1360, 0004, 1142
1801
1517
1532
0110, 0189, 0891, 1304,
1306
1801
0135, 1298, 1320
0110, 1306
1374, 1495, 1811, 1871
1313, 1570, 1569, 0186
1390, 1412, 1428
1366, 1497
1798
1293
0189
1497
1189, 1269, 0189, 0391,
0531, 1514
1189, 1269, 0189, 1289
1393
1389
1389
0135, 0842, 1298, 1320,
1531
1023, 0080, 0186, 0531,
0670, 1074
1366, 1497
1308, 1518, 0309, 0367,
1288, 1316, 1548, 1633,
1763, 1764
1189, 1269, 0189, 0391,
1120, 1266
1023, 0014, 0080, 0150,
0244, 0531, 0630, 1384
1508
0189, 1289, 1414
1254
1023, 1609, 1254, 0080,
0531, 1074, 1390, 1511
1869
1295, 1500
0189
1251, 1469, 1801
0186, 1286
1556
1077, 1517, 1653
1627, 1811, 1987
1532, 1869
17
Sony
Soundesign
Stereophonics
Sunfire
Teac
Technics
Thorens
Toshiba
Venturer
Wards
XM
Yamaha
Zenith
1058, 1441, 1258, 1759,
1622, 0474, 1349, 1406,
1442, 1558, 1658, 1758,
1858
0670
1023
1313
1074, 1390, 1528
1308, 1518, 0309
1189
1788
1390
0189, 0014, 0080
1406, 1414
0176, 0186, 1176, 1276,
1331, 1375
0857, 1293
Setup Codes for Audio Accessories
Accurian
Altec Lansing
Apple
Cambridge Soundworks
Creative
D-Link
DLO
Integra
iPort
Marantz
Motorola
NaviPod
Netgear
Omnifi
Onkyo
Roku
Sonance
SSI
Yamaha
1106
0607, 1056, 1485
1115, 1644
1530
0872
1522
1155
1789
1917
1491
1464
1644
1785
1605
1789
1828
1917
1522
1809, 1810
GoldStar
Hamlin
i3 Micro
Jerrold
Memorex
Motorola
Multitech
Myrio
Pace
Panasonic
Panther
Paragon
Philips
Pioneer
Pulsar
Quasar
RadioShack
RCA
Regal
Runco
Samsung
Sasktel
Scientific Atlanta
Sejin
Sony
Starcom
Supercable
Supermax
Thomson
Tocom
Torx
Toshiba
Tristar
V2
Viewmaster
Vision
Vortex View
Zenith
0144
0009, 0273
1602
0476, 0810, 0276, 0003,
0012, 0014
0000
1376, 0476, 0810, 0276,
1187, 1254, 1106,1540
0883
1602, 1822
1376, 1877, 0237, 0008
1376, 1877, 0000, 0107
0637
0000
1305, 0317
1877, 0877, 0144, 0533
0000
0000
0883
1256
0279, 0273
0000
1376, 1877, 0144
1737
1877, 0877, 0477, 0008,
0017
1602
1006
0003
0276
0883
1256
0012
0003
0000
0883
0883
0883
0883
0883
0000, 0525, 0899
Setup Codes for Cable Boxes/Converters
ABC
Americast
Amino
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Digeo
Digi
Director
Dumont
General Instrument
0003, 0008, 0014, 0017
0899
1602, 1822
0014
0899
0883
0883
0883
1187
0637
0476
0637
0476, 0810, 0276, 0003
Setup Codes for Cable/DVR/PVR Combos
Americast
Amino
Digeo
General Instrument
Jerrold
Motorola
Myrio
Pace
Panasonic
Pioneer
0899
1822
1187
0476, 0810
0476, 0810
1376, 0810, 1187, 1106,
1540, 0476
1822
1376,1877, 0237
1376, 1877
1877, 0877
18
RCA
Sasktel
Samsung
Scientific Atlanta
Sony
Supercable
Thomson
Zenith
1256
1737
1376, 1877
1877, 0877
1006
0276
1256
0899
Setup Codes for DVD Players
Accurian
Adcom
Advent
Aiwa
Akai
Alco
Allegro
Amphion Media Works
AMW
Apex Digital
Arrgo
Aspire Digital
Audiologic
Audiovox
Axion
B&K
BBK
Bel Canto Design
Blaupunkt
Blue Parade
Broksonic
Buffalo
Cary Audio Design
CAVS
Centrios
Cinea
Cinego
CineVision
Citizen
Coby
Craig
Curtis Mathes
CyberHome
D-Link
Daewoo
Denon
Desay
1072, 1416
1094
1016
0641
0695, 0770, 0899, 1089
0790
0869
0872, 1245
0872, 1245
0672, 0717, 0755, 0794,
0796, 0797, 0830, 1004,
1020, 1056, 1061, 1100
1023
1168, 1407
0736
0790, 1041, 1071, 1072,
1121, 1122
1071, 1072
0655, 0662
1224
1571
0717
0571
0695, 0868, 1419
1882
1477
1057
1577
0831
1399
0876, 0833, 0869
1277
0778, 0852, 1086, 1107,
1165, 1177, 1351
0831
1087
0816, 0874, 1023, 1024,
1117, 1129, 1502, 1537
1881
0784, 0705, 0833, 0869,
1169, 1172, 1234, 1242,
1441, 1443
0490, 0634
1407, 1455
Diamond Vision
Disney
Dual
Durabrand
DVD2000
Emerson
Enterprise
ESA
Fisher
Funai
Gateway
GE
Go Video
Go Vision
GoldStar
GPX
Greenhill
Harman/Kardon
Hitachi
Hiteker
iLo
Initial
Innovative Technology
Insignia
Integra
Jaton
JBL
Jensen
JSI
JVC
jWin
Kawasaki
Kenwood
KLH
Konka
Koss
Kreisen
Landel
Lasonic
Lenoxx
LG
LiteOn
Loewe
Magnavox
Malata
Marantz
McIntosh
Memorex
1316, 1609, 1610
0675, 1270
1068, 1085
1127
0521
0591, 0675, 0821, 1268
0591
0821, 1268, 1443
0670, 1919
0675, 1268, 1334
1073, 1077, 1158
0522, 0815, 0717
0744, 0715, 0741, 0783,
0833, 0869, 1044, 1075,
1099, 1144, 1158, 1304,
1443, 1730
1071, 1072
0741
0699, 0769
0717
0582, 0702
0573, 0664, 1247, 1919
0672
1348, 1472
0717, 1472
1542
1268
0627
1078
0702
1016
1423
0558, 0623, 0867, 1164,
1275, 1602, 1863
1049, 1051
0790
0490, 0534, 0682, 0737
0717, 0790, 1020, 1149,
1261
0711, 0719, 0720, 0721
0651, 0896, 1423
1421
0826
0798, 1173
1127
0591, 0741, 0801, 0869,
1526
1058, 1158, 1416, 1440
0511
0503, 0539, 0646, 0675,
0821, 1268, 1506
0782, 1159
0539
1273
0695, 0831, 1270
19
Microsoft
Mintek
Mitsubishi
Momitsu
NAD
Nakamichi
NEC
Nesa
NeuNeo
Next Base
NexxTech
Norcent
Onkyo
Oppo
OptoMedia Electronics
Oritron
Panasonic
Philips
Pioneer
Polaroid
Polk Audio
Portland
Presidian
Prima
Primare
Princeton
Proscan
ProVision
Qwestar
RCA
Rio
RJTech
Rotel
Rowa
Sampo
Samsung
Sansui
Sanyo
Sensory Science
Sharp
Sharper Image
Sherwood
Shinsonic
Sigma Designs
Sonic Blue
0522, 1708
0839, 0717, 1472
1521, 0521
1082
0741
1222
0785
0717, 1603
1454
0826
1402
1003, 0872, 1107, 1265,
1457
0503, 0627, 0792
1224, 1525
0896
0651
0490, 0632, 0703, 1362,
1462, 1490, 1762
0503, 0539, 0646, 0675,
0854, 1260, 1267, 1354
0525, 0571, 0631, 0632
1020, 1061, 1086, 1245,
1316, 1478, 1480, 1482
0539
0770
0675, 1072
1016
1467
0674
0522
0778
0651
0522, 0571, 0717, 0790,
0822, 1022, 1132, 1193
0869
1360
0623, 1178
0823
0698, 0752, 1501
0490, 0573, 0820, 0899,
1044, 1075
0695
0670, 0695, 0873, 1919
1158
0630, 0675, 0752, 1256
1117
0633, 0770, 1043, 1077,
1889
0533, 0839
0674
0869, 1099
Sony
Sound Mobile
Sova
Sungale
Superscan
SVA
Sylvania
Symphonic
TAG McLaren
Teac
Technics
Technosonic
Techwood
Terapin
Theta Digital
Toshiba
Tredex
Urban Concepts
US Logic
Valor
Venturer
Vialta
Vizio
Vocopro
Xbox
Xwave
Yamaha
Zenith
Zoece
0533, 1533, 0864, 1033,
1431, 1432, 1433, 1548,
1892
1298
1122
1074, 1532
0821
0860, 1105
0675, 0821, 1268
0675, 0821
0894
0790, 0809
0490, 0703
0730
0692
1031
0571
0503, 0695, 1045, 1154,
1854
0799, 0800, 0803, 0804
0503
0839
1298
0790
1509
1064, 1226
1027, 1360
0522, 1708
1001
0490, 0539, 0545
0503, 0591, 0741, 0869
1265
Setup Codes for DVD Recorders
Accurian
Apex Digital
Aspire Digital
Coby
CyberHome
Funai
Gateway
Go Video
iLo
JVC
Kreisen
LG
LiteOn
Magnavox
Panasonic
Philips
Pioneer
Polaroid
RCA
Samsung
1416
1056
1168
1086
1129, 1502
0675, 1334
1073, 1158
0741, 1158, 1304, 1730
1348
1164, 1275
1421
0741
1158, 1416, 1440
0646, 0675, 1506
0490
0646
0631
1086
0522
0490
20
Sensory Science
Sharp
Sony
Sylvania
Zenith
1158
0675
1033, 1431, 1432, 1433
0675
0741
Setup Codes for DVD Combos
Akai
Audiovox
iLo
Initial
LG
Mintek
RCA
0695
1071, 1121, 1122
1472
1472
1526
1472
1193
Satellite Receivers and DVR/PVR Systems
Setup Codes for Satellite Receivers
0772
AlphaStar
Amino
1615
Chaparral
0216
Coolsat
1806
Crossdigital
1109
DirecTV
1377, 0392, 0566, 0639,
1639, 1142, 0247, 0749,
1749, 0724, 0819, 1856,
1076, 1108, 0099, 1109,
1392, 1414, 1442, 1443,
1444, 1609, 1640
Dish Network System
1505, 1005, 0775, 1170,
1775
Dishpro
1505, 1005, 0775, 1775
Echostar
1505, 1005, 0775, 1170,
1775
Expressvu
0775, 1775
GE
0566
General Instrument
0869
GOI
0775, 1775
Goodmans
1246
Hisense
1535
Hitachi
0819, 1250
HTS
0775, 1775
Hughes Network Systems
1142, 0749, 1749, 1442,
1443, 1444
Humax
1790
iLo
1535
JVC
0775, 1170, 1775
LG
1226, 1414
Magnavox
0724, 0722
Memorex
0724
Mitsubishi
0749
Motorola
0869
NEC
1270
Next Level
0869
Panasonic
Pansat
Paysat
Philips
Proscan
Proton
RadioShack
RCA
Samsung
Sanyo
SKY
Sony
Star Choice
Tivo
Toshiba
UltimateTV
Ultrasat
Uniden
US Digital
USDTV
Voom
Zenith
0247, 0701
1807
0724
1142, 0749, 1749, 0724,
1076, 0722, 0099, 1442
0392, 0566
1535
0869
0566, 0855, 0143, 1392
1377, 1276, 1108, 1109,
1442, 1609
1219
0856
0639, 1639, 1640
0869
1142, 1442, 1443, 1444
0749, 1749, 0790, 1285
1392, 1640
1806
0724, 0722
1535
1535
0869
1856, 0856
Setup Codes for DVR/PVR Systems
Amino
DirecTV
Dish Network System
Dishpro
Echostar
Expressvu
Hughes Network Systems
JVC
Motorola
Philips
Proscan
RCA
Samsung
Sony
Star Choice
1615
1377, 0392, 0639, 1142,
1076, 0099, 1392, 1442,
1443, 1444, 1640
1505, 0775
1505, 0775
1505, 0775, 1170
0775
1142, 1442, 1443, 1444,
0739
1170
0869
1142, 1442, 0739
0392
1392
1442, 0739
0639, 1640
0869
Setup Codes for TVs
A-Mark
Abex
Accurian
Action
Admira
Advent
0003
0032
1803
0873l
0093, 0463
0761, 0783, 0815, 0817,
0842, 1933
21
Adventura
Aiko
Aiwa
Akai
Alaron
Albatron
Ambassador
America Action
Ampro
Anam
Anam National
AOC
Apex Digital
Archer
Astar
Audiovox
Aventura
Axion
Belcor
Bell & Howell
BenQ
Bradford
Brockwood
Broksonic
Byd:sign
Cadia
Candle
Carnivale
Carver
CCE
Celebrity
Celera
Champion
Changhong
Cinego
Citizen
Clairtone
Clarion
Commercial Solutions
Concerto
Contec
Craig
Crosley
Crown
0046
0092
0701
0812, 0702, 0030, 0098,
0672, 1207, 1903, 1935
0179, 0183, 0216
0700, 0843
0177
0180
0751
0180, 0004, 0009, 0068
0055, 0161
0030, 0003, 0019, 0052,
0137, 0185, 1365
0748, 0879, 0765, 0767,
0890, 1217, 1943
0003
1548
0451, 0180, 0092, 0003,
0623, 0710, 0802, 0846,
0875, 1284, 1937, 1951,
1952
0171
1937
0019
0154, 0016
1032, 1315
0180
0019
0236, 0463, 0003, 1935,
1938
1309, 1311
1283
0030, 0046, 0056, 0186
0030
0054, 0170
0217, 0329
0000
0765
1362
0765
1986
0060, 0030, 0092, 0039,
0046, 0056, 0186, 0280
0185
0180
1447, 0047
0056
0180, 0157, 0158, 0185
0180, 0161
0054
0180, 0039
Curtis Mathes
CXC
CyberHome
Cytron
Daewoo
Daytron
Dell
Denon
Denstar
Diamond Vision
Dumont
Durabrand
Dwin
Dynatech
Electroband
Electrograph
Electrohome
Emerson
Emprex
Envision
Epson
ESA
Fisher
FlexVision
Fujitsu
Funai
Futuretech
Gateway
GE
Gibralter
Go Video
GoldStar
Goodmans
Gradiente
Grunpy
0047, 0054, 0154, 0451,
0093, 0060, 0702, 0030,
0145, 0166, 1347, 1147,
0747, 0466, 0056, 0039,
0016
0180
0794
1326
0451, 0092, 1661, 0019,
0039, 0066, 0067, 0091,
0623, 0661, 0672
0019
1080, 1178, 1264, 1403
0145, 0511
0628
1996, 1997
0017, 0019
0463, 0180, 0178, 0171,
1034, 0003
0720, 0774
0049
0000, 0185
1623, 1755
0381, 0389, 0409
0154, 0236, 0463, 0180,
0178, 0171, 1963, 1944,
0623, 0282, 0280, 0270,
0185, 0183, 0182, 0181,
0179, 0177, 0158, 0039,
0038, 0019
1422, 1546
0030, 0813, 1365
0833, 0840, 1290
0812, 0171, 1944, 1963
0154, 0159
0710
0179, 0186, 0683, 0809,
0853
0180, 0171, 0179, 1271,
1963
0180
1001, 1002, 1003, 1004,
1755, 1756
1447, 0047, 0051, 0451,
0178, 1347, 0747, 0282,
0279, 0251, 0174, 0138,
0135, 0055, 0029, 0027,
0021
0017, 0030, 0019
0886
0178, 0030, 0001, 0002,
0019, 0032, 0106, 0409
0360
0392
0180, 0179
22
Haier
Hallmark
Hannspree
Hantarex
Harley Davidson
Harman/Kardon
Harvard
Havermy
Helios
Hello Kitty
Hewlett Packard
Hisense
Hitachi
HP
Hyundai
iLo
Infinity
Initial
Insignia
Inteq
Janeil
JBL
JCB
Jensen
JVC
Kamp
Kawasho
Kaypani
KEC
Kenwood
KLH
Kloss
KMC
Konka
Kost
KTV
LG
Loewe
Logik
Luxman
LXI
1034, 0768
0178
1348, 1351, 1352
1338
0043, 0179
0054, 0078
0180, 0068
0093
0865
0451
1088, 1089, 1101, 1494,
1502
0748
1145, 0145, 0016, 0032,
0038, 0056, 0095, 0097,
0151, 0173, 0227, 0279,
0409, 0413, 0797, 1960
1088, 1089, 1101, 1494,
1502
0849, 1219, 1294
1286, 1603, 1990
0054
1603, 1990
0171, 1204, 1326, 1517,
1963, 2002
0017
0046
0054
0000
0761, 0050, 0815, 0817,
1299, 1933
0053, 0036, 0069, 0160,
0169, 0182, 0731, 1253
0216
0158, 0216, 0308
0052
0180
0030, 0019
0765, 0767, 1962
0024, 0046, 0078
0106
0628, 0632, 0638, 0703,
0707
1262, 1483
0180, 0030, 0039, 0183,
0185, 0217, 0280
1265, 0178, 0442, 0700,
0829, 0856, 1178, 1325,
1423, 1758, 1993
0136
0016
0056
0047, 0054, 0154, 0156,
0178, 0148, 0747
Magnavox
Majestic
Marantz
Matsushita
Maxent
Megapower
Megatron
MEI
Memorex
MGA
Midland
Mintek
Minutz
Mitsubishi
Monivision
Motorola
Moxell
MTC
Multitech
NAD
NEC
Neovia
NetTV
Nikko
Noblex
Norcent
Norwood Micro
Noshi
NTC
Olevia
Olympus
Onwa
Optimus
Optoma
Optonica
Orion
Panasonic
1454, 0054, 0030, 0706,
1963, 1944, 1525, 1254,
1198, 0802, 0386, 0230,
0187, 0186, 0179, 0096,
0036, 0028, 0024, 0020
0015, 0016
0054, 0030, 0444, 0704,
0854, 0855, 1154, 1398
0250, 0650
0762, 1211, 1755
0700
0178, 0145, 0003
0185
0154, 0463, 0150, 0178,
0016, 0106, 0179
0150, 0178, 0030, 0019,
0155
0047, 0017, 0051, 0032,
0039, 0135, 0747
1603, 1990
0021
0093, 1250, 0150, 0178,
0014, 0019, 0098, 0155,
0331, 0358, 0836, 0868,
1550
0700, 0843
0093, 0055, 0835
0835
0060, 0030, 0019, 0049,
0056, 0091, 0185, 0216
0180, 0049, 0217
0156, 0178, 0866
0030, 0019, 0036, 0056,
0170, 0434, 0497, 0882,
1398, 1704
1338
0762, 1755
0178, 0030, 0092, 0317
0430
0748, 0824, 1089, 1365,
1589, 1590, 1591
1286, 1296, 1303
0018
0092
1144, 1240, 1331, 1610
1342
0180
0154, 0250, 0166, 0650
0887
0093, 0165
0236, 0463, 1463, 0179
0250, 0051, 0055, 0162,
0226, 0338, 0375, 0650,
1291, 1410, 1941, 1946,
1947
23
Penney
Petters
Philco
Philips
Pilot
Pioneer
Polaroid
Portland
Prima
Princeton
Prism
Proscan
Proton
Protron
Proview
Pulsar
Quasar
RadioShack
RCA
Realistic
Rhapsody
Runco
Sampo
Samsung
Samsux
Sansui
0047, 0156, 0051, 0060,
0178, 0030, 1347, 0747,
0309, 0149, 0138, 0135,
0110, 0039, 0032, 0027,
0021, 0019, 0018, 0003,
0002
1523
0054, 0030, 0019, 0020,
0028, 0096, 0302
1454, 0054, 0690, 1154,
1483
0030, 0019, 0039
0166, 0038, 0172, 0679,
0866, 1260, 1398
0765, 0865, 1262, 1276,
1314, 1316, 1326, 1327,
1328, 1341, 1498, 1523,
1991, 1992
0092, 0019, 0039
0761, 0783, 0815, 0817,
1933
0700, 0717
0051
1447, 0047, 0747, 1347
0178, 0003, 0031, 0052,
0466
1320, 1323
0835, 1401, 1498
0017, 0019
0250, 0051, 0055, 0165,
0219, 0650
0047, 0154, 0180, 0178,
0030, 0019, 0032, 0039,
0056, 0165, 0409, 0747
1447, 0047, 2002, 1958,
1953, 1948, 1547, 1347,
1247, 1147, 1047, 0747,
0679, 0278, 0174, 0135,
0090, 0038, 0029, 0019,
0018
0154, 0180, 0178, 0030,
0019, 0032, 0039, 0056,
0165
0183, 0185, 0216
0017, 0030, 0251, 0497,
0603, 1398
0030, 0032, 0039, 0052,
0100, 0110, 0762, 1755
0060, 0812, 0702, 0178,
0030, 1903, 1575, 1395,
1312, 1060, 0814, 0766,
0427, 0408, 0329, 0056,
0032, 0019
0039
0463, 1409, 1935
Sanyo
Sceptre
Scimitsu
Scotch
Scott
Sears
Sharp
Sheng Chia
Sherwood
Shogun
Signature
Signet
SIM2 Multimedia
Simpson
Sony
Soundesign
Sova
Soyo
Spectricon
Squareview
SSS
Starlite
Studio Experience
Superscan
Supre-Macy
Supreme
SVA
Sylvania
Symphonic
Syntax
Tandy
Tatung
Technics
Technol Ace
Technovox
Techview
Techwood
0154, 0088, 0107, 0146,
0159, 0232, 0484, 0799,
0893, 1142
0878, 1217, 1360, 1599
0019
0178
0236, 0180, 0178, 0019,
0179, 0309
0047, 0054, 0154, 0156,
0178, 0171, 0015, 0056,
0146, 0148, 0149, 0159,
0168, 0179, 0281, 0747
0093, 0039, 0153, 0157,
0165, 0220, 0281, 0386,
0398, 0491, 0688, 0689,
0818, 0851, 1602
0093
1399
0019
0016
1262
1297
0186, 0187
1100, 0000, 0011, 0080,
0111, 0273, 0353, 0810,
0834, 1317
0180, 0178, 0179, 0186
1320, 1952
1520
0003, 0137
0171
0180, 0019
0180
0843
0093, 0864
0046
0000
0748, 0587, 0768, 0865,
0870, 0871, 0872
0054, 0030, 0171, 0020,
0028, 0065, 0096, 0381,
1271, 1944, 1963
0180, 0171, 1944
1144, 1240, 1331
0093
0003, 0049, 0055, 0396,
1101, 1285, 1286, 1287,
1288, 1361, 1756
0250, 0051
0179
0007
0847
0051, 0003, 0056
24
Teknika
Telefunken
Tera
Thomson
TMK
TNCi
Toshiba
Tosonic
Totevision
Trical
TVS
Ultra
Universal
Universum
US Logic
Vector Research
Victor
Video Concepts
Vidikron
Vidtech
Viewsonic
Viking
Viore
Visart
Vizio
Wards
Waycon
Westinghouse
White Westinghouse
Wyse
Yamaha
Zenith
Zonda
0054, 0180, 0150, 0060,
0092, 0016, 0019, 0039,
0056, 0175, 0179, 0186,
0312, 0322
0702, 0056, 0074
0031
0209, 0210
0178, 0056, 0177
0017
0154, 1256, 0156, 1265,
0060, 1945, 1935, 1704,
1656, 1635, 1356, 1343,
1325, 1306, 1156, 0845,
0832, 0650, 0149, 0036
0185
0039
0157
0463
0391, 1323
0027
1337
1286, 1303
0030
0053
0098
0054, 0242, 1398
0178, 0019, 0036
0797, 0857, 0864, 0885,
1330, 1342, 1578, 1627,
1755
0046, 0312
1207
1336
0864, 0885, 1499, 1756,
1758
0054, 0178, 0030, 1156,
0866, 0202, 0179, 0174,
0165, 0111, 0096, 0080,
0056, 0029, 0028, 0027,
0021, 0020, 0019, 0016
0156
0885, 0889, 0890, 1282,
1577
0463, 0623
1365
0030, 0019, 0769, 0797,
0833, 0839
0017, 0463, 1265, 0178,
0092, 0016
0003
Setup Codes for TVs (DLP)
Hewlett Packard
HP
1494
1494
LG
Magnavox
Mitsubishi
Optoma
Panasonic
RCA
Samsung
SVA
Toshiba
Vizio
1265
1525
1250
0887
1291
1447
0812, 1060, 1312
0872
1265, 1306
1499
Setup Codes for TVs (HDTV)
Advent
Hitachi
Marantz
Mitsubishi
Panasonic
Pioneer
Princeton
RCA
Samsung
Sharp
Toshiba
0842
1960
0854
0150
0250, 0650, 1291
0679
0717
1447
0812, 0702
0688, 0689
1256
Setup Codes for TVs (LCD)
Accurian
Action
Akai
AOC
Apex Digital
Astar
Audiovox
BenQ
Byd:sign
Cadia
CyberHome
Dell
Emprex
Envision
FlexVision
Funai
Go Video
Hannspree
Hewlett Packard
HP
Hyundai
iLo
Initial
Insignia
Jensen
Kost
1803
0873
1935
1365
0890, 1217
1548
0180, 0710, 0802, 0846,
0875, 1284, 1937, 1951,
1952
1315
1309, 1311
1283
0794
1080, 1178, 1264
1422, 1546
0813, 1365
0710
0171
0886
1348, 1351
1088
1088
0849, 1219, 1294
1286, 1603, 1990
1603, 1990
1204, 1517, 2002
1299
1262
25
LG
Magnavox
Marantz
Maxent
Mintek
Mitsubishi
NetTV
Norcent
Norwood Micro
Olevia
Panasonic
Petters
Philips
Polaroid
Protron
Proview
RCA
Sampo
Samsung
Sansui
Sanyo
Sceptre
Sharp
Sherwood
Signet
Sony
Sova
Soyo
Superscan
SVA
Sylvania
Symphonic
Syntax
Tatung
Techview
Toshiba
Ultra
US Logic
Vidikron
Viewsonic
Visart
Vizio
Westinghouse
Wyse
Zenith
0856, 1178, 1993
1454, 0802, 1198
0855
0762, 1211
1603, 1990
1250
0762
1365, 1589, 1591
1286, 1296
1144, 1240, 1331, 1610
0650, 1941
1523
1454, 1483
1262, 1276, 1316, 1341,
1498, 1523
1320, 1323
1401
0047, 1958
0762
0812, 0766, 0814, 1395,
1575
1409
1142
0878, 1217, 1360, 1599
0093, 0818, 1602
1399
1262
0810
1320
1520
0864
0587, 0870, 0871
0171, 1271
0171
1144, 1240, 1331
1286
0847
0845, 1343, 1635, 1656
1323
1286
1398
0857, 0864, 0885, 1330,
1578, 1627
1336
0864, 0885, 1756
0885, 0889, 0890, 1282,
1577
1365
1265
Setup Codes for TV/DVD Combos
Controlled by the TV
Accurian
Advent
1803
1933
Akai
Apex Digital
Audiovox
Axion
Broksonic
Cinego
Diamond Vision
Emerson
ESA
Funai
Hitachi
iLo
Initial
Insignia
Jensen
KLH
LG
Magnavox
Mintek
Panasonic
Polaroid
Prima
RCA
Samsung
Sansui
Sova
Sylvania
Toshiba
1935
1943
1937, 1951, 1952
1937
1935
1986
1997
1963
1963
1963
1960
1990
1990
1963, 2002
1933
1962
1993
1963
1990
1941
1991
1933
1948, 1958, 2002
1903
1935
1952
1963
1635, 1935
Controlled by the DVD
Advent
Akai
Apex Digital
Audiovox
Axion
Broksonic
Cinego
Diamond Vision
Emerson
ESA
Funai
Go Vision
Hitachi
iLo
Initial
Insignia
Jensen
KLH
Konka
LG
Magnavox
Mintek
Panasonic
Philips
Polaroid
1016
0695
0830
1071, 1121, 1122
1071
0695
1399
1610
0675, 1268
1268
1268
1071
1247
1472
1472
1268
1016
1261
0719, 0720
1526
1268
1472
1490
0854, 1260
1480
26
Prima
RCA
Samsung
Sansui
Sova
Sylvania
Toshiba
1016
1022, 1193
0899
0695
1122
0675, 1268
0695
Setup Codes for TV/VCR Combos
Controlled by the TV
America Action
Audiovox
Emerson
Controlled by the VCR
America Action
Audiovox
Broksonic
Citizen
Colt
Curtis Mathes
Daewoo
Emerson
Funai
GE
GoldStar
Harley Davidson
Hitachi
LG
Lloyd's
Magnasonic
Magnavox
Magnin
Memorex
MGA
Mitsubishi
Optimus
Orion
Panasonic
Penney
Quasar
RadioShack
RCA
Samsung
Sansui
Sanyo
Sears
Sony
Sylvania
Symphonic
Thomas
0180
0180
0236
0278
0278
0002, 0479, 1479
1278
0072
1035
0637, 1278
0002, 0294, 0479, 0593,
1278, 1479
0000
0240, 0807, 1035, 1060
1237
0000
0000
1037
0000
0593, 1278
0000, 0593, 1781
0240
0162, 0454, 1037, 1162,
1237, 1262
0240
0807
0162, 0454, 0593, 1162,
1262
0002, 0479, 1479
0162, 1035, 1162, 1262
0240, 1035, 1237
0162, 1035, 1162
0000, 1037
0240, 0807, 1035, 1060
1014
0000, 0479, 1479
0240
0000, 1237
0000, 1232
1781
0000, 0593
0000
Toshiba
White Westinghouse
Zenith
0845, 1145
0637
0000, 0479, 0637, 1479
Setup Codes for TV/VCR/DVD Combos
Controlled by the TV
Akai
Broksonic
Diamond Vision
Emerson
ESA
Magnavox
Panasonic
Polaroid
RCA
Sylvania
Symphonic
Toshiba
1903
1938
1996
1944
1944
1944
1946, 1947
1992
1953
1944
1944
1945
Controlled by the DVD
Akai
Broksonic
Diamond Vision
Emerson
ESA
Funai
Magnavox
Panasonic
Polaroid
RCA
Sharp
Superscan
Sylvania
Symphonic
Toshiba
0899
0868
1609
0821
0821
1334
0821
1362, 1462
1482
1132
0630
0821
0821
0821
1045
Controlled by the VCR
Sharp
0807
Setup Codes for VCRs
ABS
Admiral
Adventura
Aiko
Aiwa
Akai
Alienware
America Action
American High
Asha
Audiovox
1972
0048, 0209
0000
0278
0037, 0000, 0124, 0307,
0468
0041, 0049, 0053, 0061,
0106, 0175
1972
0278
0035
0240
0037, 0278
27
Beaumark
Bell & Howell
Broksonic
Calix
Canon
Capehart
Carver
CCE
Citizen
Colt
Craig
Curtis Mathes
Cybernex
CyberPower
Daewoo
Daytron
Dell
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
Emerson
Fisher
Fuji
Funai
Garrard
Gateway
GE
Go Video
GoldStar
Gradiente
Grundig
Harley Davidson
Harman/Kardon
Harwood
Headquarter
Hewlett Packard
HI-Q
0240
0104
0184, 0121, 0209, 0002,
0211, 0295, 0361, 0479,
1479, 1815
0037
0035, 0102
0020
0081
0072, 0278
0037, 0278, 1278
0072
0037, 0047, 0240, 0072,
0271
0060, 0035, 0162, 0041,
0760, 1035
0240, 0051
1972
0045, 0278, 0020, 0561,
0637, 1278
0020
1972
0042
0739
0039, 0038
0000
0037
0037
0032
0037, 0184, 0000, 0121,
0043, 0209, 0002, 0278,
1479, 1278, 0637, 1593,
0593, 0561, 0510, 0479,
0361, 0295, 0294, 0212,
0211, 0208, 0088, 0068,
0061, 0036
0047, 0104, 0054, 0066
0035, 0033
0000, 0593, 1593
0000
1972
0060, 0035, 0240, 0065,
0202, 0760, 0761, 0807,
1035, 1060
0232, 0279, 0432, 0526,
0643
0037, 0038, 0018, 1237
0000, 0408
0195
0000
0081, 0038, 0075
0072, 0068
0046
1972
0047
Hitachi
Howard Computers
HP
Hughes Network Systems
Humax
Hush
iBUYPOWER
Jensen
JVC
KEC
Keen
Kenwood
KLH
Kodak
LG
Linksys
Lloyd's
Logik
LXI
Magnasonic
Magnavox
Magnin
Marantz
Marta
Matsushita
Media Center PC
MEI
Memorex
MGA
MGN Technology
Microsoft
Mind
Minolta
Mitsubishi
Motorola
MTC
Multitech
NAD
NEC
Nikko
Nikon
Niveus Media
Noblex
Northgate
Olympus
0000, 0042, 0041, 0065,
0082, 0089, 0105, 0166
1972
1972
0042, 0739
0739
1972
1972
0041
0067, 0041, 0008, 0206,
0207, 0384, 1707
0037, 0278
0693
0067, 0041, 0038, 0384
0072
0035, 0037
1037
1972
0000, 0208
0072
0037
0593, 1278
0035, 0039, 0081, 0000,
0149, 0110, 0563, 0593,
1593, 1781
0240
0035, 0081
0037
0035, 0162, 1162
1972
0035
0035, 0162, 0037, 0048,
0039, 0047, 0240, 0000,
0104, 0209, 0046, 0307,
0454, 0479, 1037, 1162,
1237, 1262
0240, 0043, 0061
0240
1972
1972
0042, 0105
0067, 0043, 0061, 0075,
0173, 0443, 0807
0035, 0048
0240, 0000
0000, 0072
0058
0104, 0067, 0041, 0038,
0040, 0050, 0082
0037
0034
1972
0240
1972
0035, 0226
28
Onkyo
Optimus
Optonica
Orion
Panasonic
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Polk Audio
Portland
Presidian
Profitronic
Proscan
Protec
Pulsar
Quarter
Quartz
Quasar
RadioShack
Radix
Randex
RCA
Realistic
ReplayTV
Ricavision
Ricoh
Runco
Salora
Samsung
Samtron
Sanky
Sansui
0222
1062, 0162, 0037, 0048,
0104, 0058, 0432, 0454,
0593, 1048, 1162, 1262
0062
0184, 0209, 0002, 0295,
0479, 1479
1062, 0035, 0162, 0077,
0102, 0225, 0226, 0227,
0378, 0454, 0616, 1035,
1162, 1262
0035, 0037, 0240, 0042,
0038, 0040, 0054, 1035,
1237
0042, 0065, 0105
0035
0035, 0081, 0062, 0110,
0618, 0739, 1081, 1181
0037
0067, 0058
0081
0020
1593
0240
0060, 0202, 0760, 0761,
1060
0072
0039, 0051
0046
0046
0035, 0162, 0077, 0454,
1035, 1162
0000, 1037
0037
0037
0060, 0240, 0042, 0149,
0058, 0065, 0077, 0105,
0106, 0202, 0760, 0761,
0807, 0880, 1035, 1060
0035, 0037, 0048, 0047,
0000, 0104, 0046, 0062,
0066
0614, 0616
1972
0034
0039
0075
0240, 0045, 0051, 0053,
0739, 1014
0643
0048, 0039
0000, 0067, 0209, 0041,
0082, 0271, 0479, 1479
Sanyo
Scott
Sears
Sharp
Shintom
Shogun
Singer
Sonic Blue
Sony
Stack 9
STS
Sylvania
Symphonic
Systemax
Tagar Systems
Tatung
Teac
Technics
Teknika
Thomas
Tivo
TMK
Toshiba
Totevision
Touch
Unitech
Vector
Vector Research
Video Concepts
Videomagic
Videosonic
Viewsonic
Villain
Voodoo
Wards
White Westinghouse
XRYamaha
Zenith
ZT Group
M6695
0047, 0240, 0104, 0046,
0159
0184, 0045, 0121, 0043,
0210, 0211, 0212
0035, 0037, 0047, 0000,
0042, 0104, 0046, 0054,
0066, 0105, 1237
0048, 0062, 0807, 0848
0072
0240, 0051
0072
0614, 0616
0035, 0032, 0033, 0000,
0011, 0034, 0636, 1032,
1232, 1972
1972
0042
0035, 0081, 0000, 0043,
0110, 0593, 1593, 1781
0000, 0593, 1593
1972
1972
0041
0000, 0041
0035, 0162
0035, 0037, 0000, 0052
0000
0618, 0636, 0739, 1996
0240, 0036, 0208
0045, 0043, 0066, 0210,
0212, 0366, 0845, 1008,
1145, 1972, 1996
0037, 0240
1972
0240
0045
0038, 0040
0045, 0040, 0061
0037
0240
1972
0000
1972
0060, 0035, 0048, 0047,
0081, 0240, 0000, 0042,
0072, 0149, 0062, 0212,
0760
0209, 0072, 0637
1000 0035, 0000, 0072
0038
0039, 0033, 0000, 0209,
0034, 0479, 0637, 1139,
1479
1972
Revision 1.0
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement