Tatung TRK-141 User's Manual

TRIVIEW

RACK MOUNT KIT TRK-142

Installation Instruction

Warning: 1. At least two persons are necessary to mount the monitor on the rack.

2. Do not use over force on the screws.

TRK-142 used for mounting 14" or 15" CRT color monitors on the 19" standard rack, compatible model including: TCM-1401, TCM-1402S and TCM-1501.

Instructions:

1. Go to step 2 if did not purchase handle TRH-141. Secure handle TRH-141 to TRK-141 bracket with

the screws (M4x12mm) provided, see Fig. 1.

2. Take off 4 screws from left and right side of the monitor, (these screws not used again).

3. Install TRK-142 bracket to left and right side of the monitor using the screws provided (M5,

length12mm, flat head, phillips) in the package, 2 each side, see FIG. 2.

4. Mount the whole set onto the rack frame by using 6 pieces screws: M5, length 10mm, pan or truss

head, phillips drive. (these screws are provided by rack manufacturer)

Notes:

1. Standard 19" open rack model: TOR-1901) and cabinet rack (model: TCR-1901) are available in

stock.

2. The gap between monitors or other equipments can be covered by blank panel or vent panel, 1U,

2U, 3U available. (Contact salesperson for detail)

6.0"

19" Standard Open Rack

Model TOR-1901

12.25"

TRH-141

TRK-141

FIG. 1

FIG. 2

TATUNG COMPANY OF AMERICA, INC

2850 EL PRESIDIO ST, LONG BEACH, CA 90810

TEL: 310.637.2105 FAX: 310.631.4758

TRK-141 FIG. 3