Whirlpool | 5KSM150PSEMS | Instruction for Use | multifunctionele keukenrobots met kantelbare kop tilt

TM
MULTIFUNCTIONELE KEUKENROBOTS MET KANTELBARE KOP
GIDS VOOR HET BESTE RESULTAAT
TILT-HEAD STAND MIXERS
BATTEURS SUR SOCLE À TÊTE INCLINABLE
GUIDE DU CONNAISSEUR
KÜCHENMASCHINEN MIT KIPPBAREM MOTORKOPF
ANLEITUNG FÜR PROFI-ERGEBNISSE
ROBOT DA CUCINA CON CORPO MOTORE MOBILE
GUIDA PER OTTENERE RISULTATI PROFESSIONALI
BATIDORAS DE PIE CON CABEZA INCLINABLE
GUÍA PARA CONSEGUIR RESULTADOS PROFESIONALES
KÖKSMASKIN MED UPPFÄLLBART DRIVHUVUD
GUIDE FÖR BÄSTA RESULTAT
TILT-HEAD STAND KJØKKENMASKINER
VEILEDNING FOR PROFESJONELLE RESULTATER
NOSTOPÄISET PÖYTÄMALLISET YLEISKONEET
OPAS PARHAISIIN TULOKSIIN
BRUGSANVISNING TIL KØKKENMASKINE
SÅDAN FÅR DU DE BEDSTE RESULTATER
BATEDEIRAS COM POSICIONADOR DE CABEÇA MOVEL
GUIA PARA RESULTADOS PROFISSIONAIS
HRÆRIVÉL
LEIÐBEININGAR RÉTTA NOTKUN
ΜΙΞΕΡ ΜΕ ΒΑΣΗ ΚΑΙ ΚΙΝOΥΜΕΝΗ ΚΕΦΑΛΗ
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ΓΙΑ ΤΕΛΕΙΑ ΑΠΟΤΕΛΕΣΜΑΤΑ
1
2
4
6
8
10
CAUT
I O N: U
n p lu
g be
ting
inser
fore
parts
oving
of rem
O
id
n A ig a n
h eM ic h
K itc h ,
Jo
S t.
se
A
US
p
Model 5K45SS
9709851A
Model 5KSM150PS/5KSM156PS
English
GUIDE TO EXPERT RESULTS
Table of Contents
Stand Mixer Safety ..........................................................................................................1
Important Safeguards .....................................................................................................1
Electrical Requirements ...................................................................................................2
5K45SS Tilt-Head Stand Mixer Features ...........................................................................3
5KSM150PS/5KSM156PS Tilt-Head Stand Mixer Features ................................................4
Assembling Your Tilt-Head Stand Mixer...........................................................................5
English
Assembling Your Pouring Shield ......................................................................................6
Using Your KitchenAidTM Accessories ...............................................................................6
Beater to Bowl Clearance ................................................................................................7
Care and Cleaning ..........................................................................................................8
Planetary Mixing Action ..................................................................................................8
Stand Mixer Use .............................................................................................................8
Speed Control Guide - 10 Speed Mixers ..........................................................................9
Mixing Tips ...................................................................................................................10
Mixing and Kneading Yeast Dough ...............................................................................11
Egg Whites ...................................................................................................................12
Whipped Cream............................................................................................................12
Attachments and Accessories - General Instructions......................................................13
When You Need Service ................................................................................................14
Household KitchenAidTM Tilt-Head Stand Mixer Warranty ..............................................15
Service Centers..............................................................................................................15
Customer Service ..........................................................................................................16
Stand Mixer Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously
injured if you don’t immediately
follow instructions.
You can be killed or seriously injured
if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be
followed including the following:
1. Read all instructions.
2. To protect against risk of electrical
shock, do not put stand mixer in
water or other liquid.
3. Close supervision is necessary when
any appliance is used by or near
children.
4. Unplug stand mixer from outlet when
not in use, before putting on or
taking off parts and before cleaning.
5. Avoid contacting moving parts.
Keep hands, hair, clothing, as well
as spatulas and other utensils away
from beater during operation to
reduce the risk of injury to persons
and/or damage to the stand mixer.
6. Do not operate stand mixer with
a damaged cord or plug or after
the stand mixer malfunctions, or
7.
8.
9.
10.
11.
is dropped or damaged in any
manner. Return appliance to the
nearest Authorized Service Center
for examination, repair or electrical or
mechanical adjustment.
The use of attachments not
recommended or sold by KitchenAid
may cause fire, electrical shock or injury.
Do not use the stand mixer outdoors.
Do not let the cord hang over edge
of table or counter.
Remove flat beater, wire whip or dough
hook from stand mixer before washing.
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
1
English
This symbol alerts you to potential hazards that can kill or hurt you
and others.
product, indicates that this appliance
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the recycling
of electrical and electronic equipment.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment
(WEEE).
By ensuring this product is disposed of
correctly, you will help avoid potential
negative consequences for the environment
and human health, which could
otherwise be caused by inappropriate
waste handling of this product.
Disposal must be carried out in
accordance with local environmental
regulations for waste disposal.
English
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purchased
the product.
The symbol
on the product, or
on the documents accompanying the
Electrical Requirements
Your stand mixer operates on a regular
220-240 volt AC, 50/60 hertz house
current. The wattage rating for your
stand mixer is printed on the trim band.
This wattage is determined by using the
attachment which draws the greatest
power. Other recommended attachments
may draw significantly less power.
WARNING
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
2
5K45SS Tilt-Head Stand Mixer Features
Attachment Hub
Motor Head
Speed
Control
Lever
1
2
4
6
8
10
IO N
CAUT
: U np
lu g b
efore
ting
inser
parts
oving
of rem
Motor Head
Locking Lever
(not shown)
O
A id
n ig
h eM ic h
h,
K itc
ep
Jo
S t.
A
US
an
Beater Shaft
s
Beater Height
Adjustment
Screw
Flat Beater
4.25 L
(4.5 qt)
Stainless
Steel Bowl
without
handle
Bowl Clamping Plate
Wire Whip
Dough Hook
3
English
Attachment Knob
5KSM150PS/5KSM156PS Tilt-Head
Stand Mixer Features
Attachment Hub
Motor Head
Attachment Knob
English
Motor Head
Locking Lever
(not shown)
Speed
Control
Lever
Beater Shaft
Flat Beater
Beater Height
Adjustment
Screw
Pouring
Shield
4.83 L
(5 qt)
Stainless
Steel Bowl
with
Ergonomic
Handle
Wire Whip
Bowl Clamping Plate
Dough Hook
4
To Remove Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and raise motor head.
4. Press beater upward as far as possible
and turn left.
5. Pull beater from beater shaft.
To Attach Bowl
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and tilt motor head back.
4. Place bowl on bowl clamping plate.
5. Turn bowl gently in clockwise direction.
To Remove Bowl
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and tilt motor head back.
4. Turn bowl counterclockwise.
To Lock Motor Head
1. Make sure motor head is completely
down.
2. Place locking lever in LOCK position.
3. Before mixing, test lock by attempting
to raise head.
To Unlock Motor Head
1. Place lever in UNLOCK position.
NOTE: Motor head should always be kept
in LOCK position when using mixer.
Pin
O
1
2
4
6
8 10
To Operate Speed Control
Plug mixer in proper electrical outlet.
Speed control lever should always be
set on lowest speed for starting, then
gradually moved to desired higher speed
to avoid splashing ingredients out of bowl.
See “Speed Control Guide - 10 Speed
Mixers“ section.
To Attach Flat Beater,
Wire Whip, or Dough Hook
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Hold the locking lever in the UNLOCK
position and raise motor head.
4. Slip beater onto beater shaft and press
upward as far as possible.
5. Turn beater to right, hooking beater
over pin on shaft.
5
English
Assembling Your Tilt-Head Stand Mixer
Assembling Your Pouring Shield*
To Remove Pouring Shield
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect power.
3. Lift the front of the pour shield clear of
the bowl rim and pull forward.
4. Remove attachment and bowl.
To Use Pouring Shield
English
Pouring Chute
1. For best results, rotate the shield so the
motor head covers the U-shaped gap
in the shield. The pouring chute will be
just to the right of the attachment hub
as you face the mixer.
2. Pour the ingredients into the bowl
through the pouring chute.
To Attach Pouring Shield
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect power.
3. Attach flat beater, dough hook, or wire
whip and bowl. See “Assembling Your
Tilt-Head stand mixer“ section.
4. From the front of the mixer, slide the
pouring shield over the bowl until the
shield is centered. The bottom rim of the
shield should fit within the bowl.
*If Pouring Shield is included.
Using Your KitchenAidTM Accessories
Flat Beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie pastry
biscuits
quick breads
meat loaf
mashed potatoes
Wire Whip for mixtures that need air incorporated:
eggs
egg whites
heavy cream
boiled frostings
sponge cakes
angel food cakes
mayonnaise
some candies
Dough Hook for mixing and kneading yeast doughs:
breads
rolls
pizza dough
coffee cakes
buns
6
Beater to Bowl Clearance
Your stand mixer is adjusted at the factory so the flat beater just clears the bottom of
the bowl. If, for any reason, the flat beater hits the bottom of the bowl or is too far
away from the bowl, you can correct clearance easily.
English
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Lift motor head.
4. Turn screw (A) slightly counter
clockwise (left) to raise flat beater or
clockwise (right) to lower flat beater.
5. Make adjustment with flat beater, so it
just clears surface of bowl. If you over
adjust the screw, the bowl lock lever
may not lock into place.
NOTE: When properly adjusted, the flat
beater will not strike on the bottom or
side of the bowl. If the flat beater or the
wire whip is so close that it strikes the
bottom of the bowl, coating may wear off
the beater or wires on whip may wear.
A
7
Care and Cleaning
hot sudsy water and rinse completely before
drying. Do not store beaters on shaft.
NOTE: The wire whip is not dishwashersafe!
English
NOTE: Always be sure to unplug stand
mixer before cleaning. Wipe stand mixer
with a soft, damp cloth. Do not use
household/commercial cleaners. Do not
immerse in water. Wipe off beater shaft
frequently, removing any residue that may
accumulate.
Bowl, white flat beater and white dough
hook may be washed in an automatic
dishwasher. Or, clean them thoroughly in
Planetary Mixing Action
coverage of the bowl made by the path of
the beater.
Your KitchenAidTM stand mixer will mix
faster and more thoroughly than most
other electric mixers. Therefore, the mixing
time in most recipes must be adjusted to
avoid overbeating.
During operation, the
flat beater moves
around the stationary
bowl, at the same
time turning in the
opposite direction on
its own axis. The diagram
shows the complete
Stand Mixer Use
The stand mixer may warm up during use.
Under heavy loads with extended mixing
time, you may not be able to comfortably
touch the top of the unit. This is normal.
NOTE: Do not scrape bowl while stand
mixer is operating.
The bowl and beater are designed to
provide thorough mixing without frequent
scraping. Scraping the bowl once or twice
during mixing is usually sufficient. Turn
unit off before scraping.
8
Speed Control Guide – 10 Speed Mixers
All speeds have the Soft Start feature which automatically starts the stand mixer at a
lower speed to help avoid ingredient splash-out and “flour puff” at start-up then quickly
increases to the selected speed for optimal performance.
Stir
Speed
STIR
For slow stirring, combining, mashing,
starting all mixing procedures. Use to
add flour and dry ingredients to batter, and
add liquids to dry ingredients. Do not use STIR
Speed to mix or knead yeast doughs.
2
SLOW MIXING
For slow mixing, mashing, faster stirring. Use
to mix and knead yeast doughs, heavy batters
and candies, start mashing potatoes or other
vegetables, cut shortening into flour, mix
thin or splashy batters. Use with Can Opener
attachment.
4
MIXING,
BEATING
For mixing semi-heavy batters, such as cookies.
Use to combine sugar and shortening and
to add sugar to egg whites for meringues.
Medium speed for cake mixes. Use with: Food
Grinder, Rotor Slicer/Shredder, Pasta Roller, and
Fruit/Vegetable Strainer.
6
BEATING,
CREAMING
For medium fast beating (creaming) or whipping.
Use to finish mixing cake, doughnut, and other
batters. High speed for cake mixes. Use with
Citrus Juicer attachment.
8
FAST BEATING,
WHIPPING
For whipping cream, egg whites, and
boiled frostings.
10
FAST WHIPPING
For whipping small amounts of cream, egg
whites or for final whipping of mashed
potatoes. Use with Pasta Maker and Grain Mill
attachments.
NOTE: Will not maintain fast speeds under
heavy loads, such as when using Pasta Maker
or Grain Mill attachments.
NOTE: The Speed Control Lever can be set between the speeds listed in the above chart
to obtain speeds 3, 5, 7, and 9 if a finer adjustment is required. Do not exceed Speed 2
when preparing yeast doughs as this may cause damage to the mixer.
9
English
Number of Speed
Mixing Tips
Cake Mixes
Converting Your Recipe
for the Stand Mixer
When preparing packaged cake mixes, use
Speed 4 for medium speed and Speed 6
for high speed. For best results, mix for
the time stated on the package directions.
English
The mixing instructions found in this
book can be used to convert your favorite
recipes for use with your KitchenAidTM
stand mixer.
To help determine a mixing procedure,
your own observations and experience will
be needed. Watch the batter or dough
and mix only until it has the desired
appearance described in your recipe such
as “smooth and creamy.” Refer to the
“Speed Control Guide - 10 Speed Mixers“
section to help determine proper mixing
speeds.
Adding Nuts, Raisins, or
Candied Fruits
Solid materials should be folded in the last
few seconds of mixing on STIR Speed. The
batter should be thick enough to keep the
fruit or nuts from sinking to the bottom of
the pan during baking. Sticky fruits should
be dusted with flour for better distribution
in the batter.
Adding Ingredients
Liquid Mixtures
The standard procedure to follow when
mixing most batters, especially cake and
cookie batters, is to add:
1
/3 dry ingredients
1
/2 liquid ingredients
1
/3 dry ingredients
1
/2 liquid ingredients
1
/3 dry ingredients
Use STIR Speed until ingredients have
been blended. Then gradually increase to
desired speed.
Always add ingredients as close to
side of bowl as possible, not directly into
moving beater. The Pouring Shield can be
used to simplify adding ingredients.
NOTE: If ingredients in very bottom of
bowl are not thoroughly mixed, the beater
is not far enough into the bowl. See the
“Beater to Bowl Clearance“ section.
Mixtures containing large amounts of
liquid ingredients should be mixed at
lower speeds to avoid splashing. Increase
speed only after mixture has thickened.
Kneading Yeast Doughs
ALWAYS use the dough hook to mix and
knead yeast doughs. Use Speed 2 to mix
or knead yeast doughs. Use of any other
speed creates high potential for unit failure.
Do not use recipes calling for more
than 0.87 kg (7 cups) all-purpose flour or
0.81 kg (6 cups) whole wheat flour when
making dough with a 4.25 L (4.5 qt) tilthead mixer.
Do not use recipes calling for more
than 1.00 kg (8 cups) all-purpose flour or
0.81 kg (6 cups) whole wheat flour when
making dough with a 4.8 L (5 qt)
tilt-head mixer.
10
“Rapid Mix” describes a bread baking
method that calls for dry yeast to be
mixed with other dry ingredients before
liquid is added. In contrast, the traditional
method is to dissolve yeast in warm water.
1. Place all dry ingredients including yeast
into bowl, except last 125 to 250 g
(1 to 2 cups) flour.
2. Attach bowl and dough hook. Lock
mixer head. Turn to Speed 2 and mix
about 15 seconds, or until ingredients
are combined.
5. When dough clings to hook, knead on
Speed 2 for 2 minutes, or until dough
is smooth and elastic.
6. Unlock and tilt back head and remove
dough from hook. Follow directions in
recipe for rising, shaping, and baking.
When using the traditional method to
prepare a favorite recipe, dissolve yeast
in warm water in warmed bowl. Add
remaining liquids and dry ingredients,
except last 125 to 250 g (1 to 2 cups)
flour. Turn to Speed 2 and mix about
1 minute, or until ingredients are
thoroughly mixed. Proceed with steps 4
through 6.
Both methods work equally well for
bread preparation. However, the “Rapid
Mix” method may be a bit faster and
easier for new bread bakers. It is slightly
more temperature tolerant because the
yeast is mixed with dry ingredients rather
than with warm liquid.
3. Continuing on Speed 2, gradually add
liquid ingredients to flour mixture and
mix 1 to 2 minutes longer.
NOTE: If liquid ingredients are added too
quickly, they will form a pool around the
dough hook and slow down mixing process.
4. Continuing on Speed 2, gently add
remaining flour, 60 g (1/2 cup) at a time.
Mix until dough clings to hook and
cleans sides of bowl, about 2 minutes.
11
English
Mixing and Kneading Yeast Dough
Egg Whites
Place room temperature egg whites in
clean, dry bowl. Attach bowl and wire
whip. To avoid splashing, gradually turn
to designated speed and whip to desired
stage. See chart below.
Begins to Hold Shape
AMOUNT
Tips of peaks fall over when wire whip is
removed.
Air bubbles are fine and compact; product
is white.
Soft Peak
SPEED
English
1 egg white ............. GRADUALLY to 10
2-4 egg whites ............. GRADUALLY to 8
6 or more
egg whites ............. GRADUALLY to 8
Almost Stiff
Sharp peaks form when wire whip is
removed, but whites are actually soft.
Whipping Stages
Stiff but not Dry
With your KitchenAidTM stand mixer, egg
whites whip quickly. Avoid overwhipping.
This list tells you what to expect.
Sharp, stiff peaks form when wire whip is
removed. Whites are uniform in color and
glisten.
Frothy
Stiff and Dry
Large, uneven air bubbles.
Sharp, stiff peaks form when wire whip is
removed. Whites are speckled and dull in
appearance.
Whipped Cream
Pour cold whipping cream into chilled bowl.
Attach bowl and wire whip. To avoid
splashing, gradually turn to designated
speed and whip to desired stage. See
chart below.
AMOUNT
Begins to Thicken
Cream is thick and custard-like.
Holds its Shape
Cream forms soft peaks when wire whip
is removed. Can be folded into other
ingredients when making desserts and
sauces.
SPEED
59 mL (1/4 cup) ............. GRADUALLY to 10
118 mL (1/2 cup) ........... GRADUALLY to 10
236 mL (1 cup) .............. GRADUALLY to 8
472 mL (1 pint ) ............ GRADUALLY to 8
Stiff
Cream stands in stiff, sharp peaks when
wire whip is removed. Use for topping
on cakes or desserts, or filling for cream
puffs.
Whipping Stages
Watch cream closely during whipping.
Because your KitchenAidTM stand mixer
whips so quickly, there are just a few
seconds between whipping stages. Look
for these characteristics:
12
Attachments and Accessories
General Information
See the stand mixer Attachments Use and Care Guide for speed settings and operating
times.
Attachment
Attachment
Knob
Power Shaft‡
Attachment
Housing
Attachment
Hub Socket
Notch
Not part of mixer.
Pin
‡
Attachment Shaft
Housing
General Instructions
To Attach
To Remove
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Loosen attachment knob by turning it
counterclockwise.
4. Remove attachment hub cover.
5. Insert attachment shaft housing into
attachment hub, making certain that
attachment power shaft fits into
square attachment hub socket. It may
be necessary to rotate attachment
back and forth. When attachment
is in proper position, the pin on the
attachment will fit into the notch on
the hub rim.
6. Tighten attachment knob by turning
clockwise until attachment is
completely secured to stand mixer.
7. Plug into proper electrical outlet.
1. Turn speed control to “O.”
2. Unplug stand mixer or disconnect
power.
3. Loosen attachment knob by turning it
counterclockwise. Rotate attachment
slightly back and forth while pulling
out.
4. Replace attachment hub cover.
Tighten attachment knob by turning it
clockwise.
13
English
KitchenAidTM Attachments are designed to assure long life. The attachment power shaft
and hub socket are of a square design, to eliminate any possibility of slipping during
the transmission of power to the attachment. The hub and shaft housing are tapered to
assure a snug fit, even after prolonged use and wear. KitchenAidTM Attachments require
no extra power unit to operate them; the power unit is built-in.
When You Need Service
If your stand mixer should malfunction
or fail to operate, please check the
following:
WARNING
English
- Is the stand mixer plugged in?
- Is the fuse in the circuit to the stand
mixer in working order? If you have a
circuit breaker box, be sure the circuit is
closed.
- Turn off the stand mixer for
10-15 seconds, then turn it back on. If
the mixer still does not start, allow it to
cool for 30 minutes before turning it
back on.
- If the problem is not due to one of the
above items, see the “Service Centers“
section.
Electrical Shock Hazard
Plug into a grounded outlet.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Please read the following before
calling your service center.
1. The stand mixer may warm up during
use. Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the unit. This is normal.
2. The stand mixer may emit a pungent
odor, especially when new. This is
common with electric motors.
3. If the flat beater hits the bowl, stop the
stand mixer. See the “Beater to Bowl
Clearance” section.
14
Length of
Warranty:
KitchenAid
Will Pay For:
KitchenAid
Will Not Pay For:
Europe, Australia and
New Zealand:
For the Artisan™ stand
mixers 5KSM150/156PS:
Five years Full Warranty
from date of purchase.
Replacement parts and
repair labor costs to
correct defects in materials
or workmanship. Service
must be provided by an
Authorized KitchenAid
Service Center
A. Repairs when stand
mixer is used for
operations other than
normal household food
preparation.
For the KitchenAid Classic
mixer 5K45SS: Two years
Full Warranty from date of
purchase.
B. Damage resulting from
accident, alterations,
misuse, abuse, or
installation/ operation
not in accordance with
local electrical codes.
Other:
One Year Full Warranty
from date of purchase.
KITCHENAID DOES NOT ASSUME ANY RESPONSIBILITY FOR
INDIRECT DAMAGES.
Service Centers
All service should be handled locally by an
Authorized KitchenAid Service Center.
Contact the dealer from whom the unit
was purchased to obtain the name of the
nearest Authorized KitchenAid Service Center.
In Ireland:
M.X. ELECTRIC
Service Department
25 Alymer Crescent
Kilcock, CO.KILDARE
Call: 87 2581574
In the U.K.:
Call: 0845 6011 287
Fax: 1 628 4368
In Australia:
Call: 1800 990 990
In New Zealand:
Call: 0800 881 200
15
English
Household KitchenAidTM
Tilt-Head Stand Mixer Warranty
Customer Service
In U.K. & Ireland: Tollfree number 0800 988 1266
(Calls from mobile phones are charged at your
standard network rate)
For Southern Ireland: Tollfree number +44 (0) 20 8616 5148
English
Address: KitchenAid Europa, Inc.
PO BOX 19
B-2018 ANTWERP 11
BELGIUM
www.KitchenAid.co.uk
www.KitchenAid.eu
TM
TM
® Registered Trademark of KitchenAid, U.S.A.
™Trademark of KitchenAid, U.S.A.
The shape of the stand mixer is a trademark of KitchenAid, U.S.A.
© 2010. All rights reserved.
Specifications subject to change without notice.
10/10
9709851A
16
Download PDF

advertising