Retain For Future - Dyaco Canada Inc.

Retain For Future - Dyaco Canada Inc.
Owner’s Manual
Model No.
161168325
- Assembly
- Operation
- Adjustments
- Parts
- Warranty
CAUTION:
Read and
understand this
manual before
operating unit
Retain For Future Reference
Retain For Future
TABLE OF CONTENTS
Product Registration
3
Important Safety Instructions
4
Important Electrical Instructions
5
Important Operation Instructions
5
Assembly Instructions
6
Features
11
Console Operation
12
Programmable Features
15
Heart Rate Information
18
General Maintenance
22
Exploded View Diagram
23
Parts list
24
Manufacturer’s Limited Warranty
28
ATTENTION
This fitness bike is intended for residential use only and is warranted for this
application. Any other application voids this warranty in its entirety.
Customer Service 1-888-707-1880
Email: [email protected]
2
Dyaco Canada Inc. 2013
Thank you for your purchase of this quality stationary bike trainer from Dyaco Canada
Inc. Your new bike was manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available. Through
your dealer, Dyaco Canada Inc. will do all we can to make your ownership experience as
pleasant as possible for many years to come. The local dealership where you purchased
this bike is your administrator for all Dyaco Canada Inc. warranty and service needs.
Their responsibility is to provide you with the technical knowledge and service personnel
to make your experience more informed and any difficulties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone
number, and the date of purchase below to make any future, needed contact easy. We
appreciate your support and we will always remember that you are the reason that we
are in business. Please complete and mail your registration card today and enjoy your
new bike.
Yours in Health,
Name of Dealer ______________________________________
Dealer Phone #___________________________
Purchase Date _______________________________________
Product Registration
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number_______________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to
Dyaco Canada Inc.
Customer Service 1-888-707-1880
Email: [email protected]
3
Dyaco Canada Inc. 2013
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your fitness bike from the electrical outlet
prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the fitness bike on
a flat level surface with access to a 230-volt, 10-amp grounded outlet with only the fitness bike plugged
into the circuit.
DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE
OUTLET ON THE END:
WARNING - To reduce the risk of burns, fire electric shock, or injury to persons:
1. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and
before putting on or taking off parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or
injury to persons.
3. Close super vision is necessary when this appliance is used by, on, or near children, invalids, or disabled
persons.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not
recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the appliance to a ser vice center for examination
and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and
the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being use or where oxygen is being administered.
12. Connect this appliance to a properly grounded outlet only.
13. The appliance is intended for household use.
14. User weight should not exceed 350 lbs (159 kg).
Fitness Equipment Safety Instructions
To disconnect turn all controls to the off position, then remove the plug from the outlet.
Do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and
equipment may result.
Before beginning this or any exervise program, consult a physician. This is especially important for
persons over the age of 35 or persons with pre-existing health conditions.
Do not attempt to use your equipment for any purpose other than for the purpose it is intended.
Keep hands away from all moving parts.
The pulse sensors are not medical devices. Their purpose is to provide you with an approximate
measurement in relation to your target hear t rate. Use of a chest transmitter strap (sold separately) is a
much more accurate method of hear t rate analysis .Various factors, including the user’s movement, may
affect the accuracy of hear t rate readings. The pulse sensors are intended only as exercise aids in
determining hear t rate trends in general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
equipment. Quality athletic shoes are recommended to avoid leg fatigue.
Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself
(and possibly others) to injury, and reduce the longevity of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Customer Service 1-888-707-1880
Email: [email protected]
4
Dyaco Canada Inc. 2013
Important Electrical Instructions
WARNING!
NEVER remove any cover without first disconnecting AC power. If voltage varies by ten
percent (10%) or more, the performance of your fitness bike may be affected. Such
conditions are not covered under your warranty. If you suspect the voltage is low, contact
your local power company or a licensed electrician for proper testing.
NEVER expose this fitness bike to rain or moisture. This product is NOT designed
for use outdoors, near a pool or spa, or in any other high humidity environment. The
operating temperature specification is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing (no water drops forming on surfaces).
Important Operation Instructions
NEVER operate this fitness bike without reading and completely understanding the
results of any operational change you request from the computer.
Understand that changes in resistance do not occur immediately. Set your desired
resistance level on the computer console and release the adjustment key. The
computer will obey the command gradually.
NEVER use your fitness bike during an electrical storm. Surges may occur in your
household power supply that could damage fitness bike components. Unplug the
fitness bike during an electrical storm as a precaution.
Use caution while participating in other activities while pedaling on your fitness bike;
such as watching television, reading, etc. These distractions may cause you to lose
balance which may result in serious injury.
Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure.
Customer Service 1-888-707-1880
Email: [email protected]
5
Dyaco Canada Inc. 2013
Assembly Instructions
Pre-Assembly
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under
the bottom edge of the carton and pull it away from the cardboard underneath, separating the
staples that join the two together. Lift the box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged
parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into four steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion. The numbers in the instructions
that are in parenthesis (#) are the item number from the assembly drawing for reference.
Assembly Tools
#114. Phillips Head Screwdriver
#115. L Allen Wrench
#112. 12/14mm Wrench
#132. 14/15mm Wrench
Customer Service 1-888-707-1880
Email: [email protected]
6
Dyaco Canada Inc. 2013
STEP 1: Rear Stabilizer & Seat Back
1.
2.
3.
Attach the Rear Stabilizer (7) to the Main Frame (1) with the two Carriage Bolts (65), two Flat
Washers (84) and two Cap Nuts (191).Tighten completely with the Wrench (112).
Attach the Seat Back (5) to the Seat Carriage (4) of the main frame. Slide a Hex Head Bolt (67) and a
Hex Head Bolt (142) through each side, then attach a Flat Washer (77) and a Nyloc Nut (89) to each
bolt. Tighten the bolts just enough so there is no side to side play, but freedom of movement front to
back. Use the Wrenches provided (112 & 132).
Insert an end cap (32) into each opening of the Front Stabilizer Tube. You may need to tap them in
with a rubber mallet if they are tight.
HARDWARE
#77. 3/8”x 19 x 1.5T
Flat Washer
(4 pcs)
#84. 3/8”x 25 x 2T
Flat Washer
(2 pcs)
#89. 3/8” x 7T
Nyloc Nut
(4 pcs)
#142. 3/8” x 4-1/4”
Hex Head Bolt
(2 pcs)
#67. 3/8”x 4”
Hex Head Bolt
(2 pcs)
Customer Service 1-888-707-1880
Email: [email protected]
7
#65. 3/8”x 53mm
Carriage Bolt
(2 pcs)
#191. 3/8”
Cap Nut
(2 pcs)
Dyaco Canada Inc. 2013
STEP 2: Console Mast
1.
2.
3.
4.
5.
Slide the Computer Cable (44) through the bottom of the Console Mast Cover (31) and then the
bottom of the Console Mast (2). Make sure the Console Mast Cover is correctly oriented (see
illustration).
Install the Console Mast (2) into the receiving tube (make sure not to pinch cable (44); damage to the
electronics could occur) of the Main Frame (1). Insert two Hex Head Bolts (68) and two Flat Washers
(76) on each side. Insert two Hex Head Bolts and two Curved Washers (83) on the front. Tighten all
six bolts firmly with the Wrench (112).
Remove the white styrofoam pad (factor y installed to prevent bolts from being accidentally dropped
into the Console Mast Tube).
Insert the Computer Cable (44) and Hand Pulse Cable (45) into their respective connectors in the
back of the Console Assembly (19). Attach the console onto the mounting plate with four Phillips
Head Screws (99). Tighten with the Phillips Head Screw Driver (114).
Attach the Handle Bar Assembly (3) onto the Console Mast (2) bracket with the two Hex Head Bolts
(68), two Split Washers (82), and two Flat Washers (76). Completely tighten with the Wrench (112).
HARDWARE
#82. 5/16” x 1.5T
Split Washer
(2 pcs)
#83. 5/16” x 19 x 1.5T
Curved Washer
(2 pcs)
Customer Service 1-888-707-1880
Email: [email protected]
#68. 5/16” x 5/8”
Hex Head Bolt
(8 pcs)
8
#76. 5/16” x 18 x 1.5T
Flat Washer
(6 pcs)
#99. M5 x 12mm
Phillips Head Screw
(4 pcs)
Dyaco Canada Inc. 2013
STEP 3: Seat & Handle Bar
1.
2.
3.
Install the Seat (61) on the Seat Carriage (4) with four Phillips Head Screws (98).Tighten with the
Phillips Head Screw Driver (114).
Attach the Seat Handle Bar (6) to the Seat Carriage (4) with the four Hex Head Bolts (71), four Flat
Washers (77), and four Nyloc Nuts (89).Tighten with the Wrenches provided (112 & 132).
Plug the Hand Pulse Sensor Cables (27) into the left side of the rear plastic cover.
HARDWARE
#98. M6 x 15mm
Phillips Head Screw
(4 pcs)
Customer Service 1-888-707-1880
Email: [email protected]
#89. 3/8” x 7T
Nyloc Nut
(4 pcs)
#77. 3/8” x 19 x 1.5T
Flat Washer
(4 pcs)
9
#71. 3/8” x 1-3/4”
Hex Head Bolt
(4 pcs)
Dyaco Canada Inc. 2013
STEP 4: Plastic Parts
1.
2.
3.
4.
Remove the Button Head Socket Screws holding the clamps of the left Release Lever (40) by using
the Allen Wrench (115). Install the Release Lever (40) onto the Handle Bar Seat (6) just behind the
Hand pulse sensors on the left side (when facing the front of the bike). Install it at an angle that allows
easy access for use, then reinsert and tighten the socket screws removed earlier. Don’t over tighten
these screws.
Secure the Steel Cable (59) to the Seat Handle Bar (6) with the Velcro Tape. Wrap the tape around
the handlebars in places that will be under the beverage holders so they are out of sight.
Attach the Pedals (L, R)(116,117) to the Crank Arms (51L, 51R).Tighten with the Wrench (132).
Remember that the left pedal has a reverse thread and will be threaded onto the Crank arm in a
counterclockwise motion. There is an “L” stamped in the end of the threaded post of the left pedal and
an “R” in the right. Make sure to tighten the pedals as firmly as you can. It may be necessary to
re-tighten the pedals if you feel a thumping while pedaling the bike. A thumping or clicking noise is
usually caused by loose pedals.
Attach the Drink Bottle Holders (L39 & R38) to the sides of the Seat Handle Bar (6) with four Sheet
Metal Screws (105).Tighten with the Phillips Head Screw Driver (114).
HARDWARE
#105. 4 x 16mm
Sheet Metal Screw
(4 pcs)
Customer Service 1-888-707-1880
Email: [email protected]
10
Dyaco Canada Inc. 2013
Product Features
Transportation
The fitness bike is equipped with two transport wheels that are engaged when the rear of
the XBR Series Fitness bike is lifted.
Seat Adjustability
There is a cable activated hand lever on left side of the seat for convenient adjustments of
the seat location. This can be used from the seated position so you don’t have get out of
your seat and guess where the seat should be located.
Console
The console will display RPM, Calories burned, Time(elapsed or countdown), Distance
travelled, Pulse, Resistance Level, Program Name, Speed Watts, and number of Laps
completed. There is also a resistance level profile graph that lets you see how hard you
have worked and how challenging the upcoming segments will be.
Customer Service 1-888-707-1880
Email: [email protected]
11
Dyaco Canada Inc. 2013
Operation Of Your Console
GETTING FAMILIAR WITH THE CONTROL PANEL
Large LCD with
scrolling feedback
and scrolling
message center
Swivel Fan to
keep you cool
Innovative
programs offer a
variety of work-outs
Convenient cargo
compartment for
keys, phone, or
MP3 player
Easy-Touch
Control Buttons
Power
When the Power is connected to the fitness bike, if there is no input to the console for 20
minutes the console will go to stand-by mode. In stand-by mode the console display will
turn off. To turn the console on press any key.
When initially powered on the console will perform an internal self-test. During this time
all the lights will turn on. When the lights go off, the Message Center will show the
software version (i.e.: VER 1.0). The distance window shows the distance total and the
time window shows the total hours of use. The dot matrix display will be scrolling
through the different profiles of the programs and the message window will be scrolling
the start up message. You may now begin to use the console.
Customer Service 1-888-707-1880
Email: [email protected]
12
Dyaco Canada Inc. 2013
Quick Start
This is the quickest way to start a workout. After the console
powers up you just press the Start key to begin, this will initiate
the Quick Start mode. In Quick Start the Time will count up from
zero and the workload may be adjusted manually by pressing
the Level Up/Down buttons. The dot matrix display will have
only the bottom row lit at first. As you increase the work load
more rows will light indicating a harder workout. The fitness
bike will get harder to pedal as the rows increase.
There are 20 levels of resistance available for plenty of variety. The first 5 levels are very
easy workloads and the changes between levels are set to a good progression for
de-conditioned users. Levels 6-10 are more challenging, but the increases in resistance
from one level to the next remain small. Levels 11-15 start getting tough as the levels
jump more dramatically. Levels 16-20 are extremely hard and are good for short interval
peaks and elite athletic training.
Basic Information
The Message Center will initially be displaying the Program
name. When in scan mode during a program, speed will be
displayed for four seconds, then move on and display Watts
(indication of workload). If 100 watts is displayed, you are doing
enough work to keep a 100-watt light bulb lit. The data changes
to Laps completed, Segment time, Max level. Pressing the
Enter button again will bring you back to the beginning.
The Stop button actually has several functions. Pressing the
Stop key once during a program will pause the program for 5
minutes. If you need to get a drink, answer the phone or any of
the many things that could interrupt your workout, this is a great
feature. To resume your workout during Pause, just press the
Start key. If the Stop button is pressed twice during a workout,
the program will end and the console will display your Workout
Summary (Total time, Avg. Speed, Avg. Watts, Avg. HR, total Laps). If the Stop key is
held down for 3 seconds or a third time during the program, the console will perform a
complete Reset. During data entry for a program the Stop key performs a previous
screen or segment function. This allows you to go back to change programming data.
Customer Service 1-888-707-1880
Email: [email protected]
13
Dyaco Canada Inc. 2013
Program Keys
The Program Keys are used to preview each program. When you first turn the console
on you may press each program key to preview what the program profile looks like. If
you decide that you want to try a program, press the corresponding program key and
then press the Enter key to select the program and enter into the data-setting mode.
The fitness bike has a built in heart rate monitoring system. Simply grasping the hand
pulse sensors on the stationary handle bars or wearing the heart rate transmitter (see
Using Heart Rate Transmitter section) will start the Heart Icon blinking (this may take a
few seconds).The Pulse Display Window will display your heart rate, or Pulse in beats
per minute.
The console includes a built-in fan to help keep you cool. To turn the fan on, press the
button on the left side of the console.
Programming The Console
Each of the programs can be customized with your personal information and changed to
suit your needs. Some of the information asked for is necessary to ensure the readouts
are correct. You will be asked for your Age and Weight. Entering your Age is necessary
during the Heart Rate programs to ensure the correct settings are in the program for
your Age. Otherwise the work settings could be too high or low for you. Entering your
Weight aides in calculating a more correct Calorie reading. Although we cannot provide
an exact calorie count, we do want to be as close as possible.
CALORIE NOTE: Calorie readings on every piece of exercise equipment, whether it is
in a gym or at home, are not accurate and tend to vary widely. They are meant only as a
guide to monitor your progress from workout to workout. The only way to measure your
calorie burn accurately is in a clinical setting connected to a host of machines. This is
because every person is different and burns calories at a different rate. Some good
news is that you will continue to burn calories at an accelerated rate for at least an hour
after you have finished exercising!
Entering A Program And Changing Settings
When you enter a program, by pressing a program key, then Enter key, you have the
option of entering your own personal settings. If you want to workout without entering
new settings, then just press the Start key. This will bypass the programming of data
and take you directly to the start of your workout. If you want to change the personal
settings then just follow the instructions in the Message Center. If you start a program
without changing the settings, the default or saved settings will be used.
NOTE: Age and Weight default settings will change when you enter a new number. So
the last Age and Weight entered will be saved as the new default settings. If you enter
your Age and Weight the first time you use the fitness bike, you will not have to enter it
every time you work out unless either your Age or Weight changes or someone else
enters a different Age and Weight.
Customer Service 1-888-707-1880
Email: [email protected]
14
Dyaco Canada Inc. 2013
Programmable Features
Manual
The Manual program works as the name implies, manually. This means that you control
the workload and not the computer. To start the Manual program, follow the instructions
below or just press the Manual button, then the Enter button and follow the directions in
the Message Center.
1.
2.
3.
4.
5.
6.
7.
8.
Press the Manual key, then press the Enter key.
The Message Center will ask you to enter your Age. You
may enter your age, using the Up/Down keys, then press
the Enter key to accept the new value and proceed on to the
next screen.
You are now asked to enter your Weight. You may adjust the
Weight value using the Up/Down keys, then press Enter to
continue.
Next is Time. You may adjust the Time and press Enter to
continue.
Now you are finished editing the settings and can begin your
workout by pressing the Start key. You can also go back and
modify your settings by pressing the Enter key.
Once the program starts you will be at level one. This is the
easiest level and it is a good idea to stay at level one for a
while to warm up. If you want to increase the work load at
any time press the Up key; the Down key will decrease the
work-load.
During the Manual program you will be able to scroll through
the data in the Message Center by pressing the Enter key.
When the program ends you may press Start to begin the
same program again or Stop to exit the program or you can
save the program you just completed as a custom user
program by pressing a User key and following the
instructions in the Message Center.
Customer Service 1-888-707-1880
Email: [email protected]
15
Dyaco Canada Inc. 2013
Preset Programs
The fitness bike has five different programs that have been designed for a variety of
workouts. These five programs have factory preset work level profiles for achieving
different goals.
Hill
This program follows a triangle or pyramid type of gradual
progression from approximately 10% of maximum effort (the
level that you chose before starting this program) up to a
maximum effort which lasts for 10% of the total workout time,
then a gradual regression of resistance back to approximately
10% of maximum effort.
Fat Burn
RESISTANCE
RESISTANCE
This program follows a quick progression up to the maximum
resistance level (default or user input level) that is sustained
for 2/3 of the workout. This program will challenge your ability
to sustain your energy output for an extended period of time.
Cardio
This program presents a quick progression up to near
maximum resistance level (default or user input level). It has
slight fluctuations up and down to allow your heart rate to
elevate, and then recover repeatedly, before beginning a
quick cool down. This will build up your heart muscle and
increase blood flow and lung capacity.
Interval
This program takes you through high levels of intensity
followed by recovery periods of low intensity. This program
utilizes and develops your “Fast Twitch” muscle fibers which
are used when performing tasks that are intense and short in
duration. These deplete your oxygen level and spike your
heart rate, followed by periods of recovery and heart rate drop
to replenish oxygen. Your cardiovascular system gets
programmed to use oxygen more efficiently.
Customer Service 1-888-707-1880
Email: [email protected]
16
RESISTANCE
RESISTANCE
Dyaco Canada Inc. 2013
Programming Preset Programs
1. Select the desired program button then press the Enter key.
2. The Message Center will ask you to enter your Age. You may
adjust the age setting, using the Level Up/Down keys, then
press the Enter key to accept the new number and proceed on
to the next screen.
3. You are now asked to enter your Weight. You may adjust the
Weight value using the Level Up/Down keys, then press Enter
to continue.
4. Next is Time. You may adjust the time and press Enter to
continue.
5. Now you are asked to adjust the Max Resistance Level. This is
the peak exertion level you will experience during the program.
Adjust the level and then press Enter.
6. Now you are finished editing the settings and can begin your
workout by pressing the Start key. You can also go back and
modify your settings by pressing the Enter key.
7. If you want to increase or decrease the resistance at any time
during the program, press the Level Up/Down keys on the
console or above the heart rate sensor grips of the stationary
handlebars. This will change the resistance settings of the
entire profile, although the profile picture on the screen will not
change. The reason for this is so that you can see the entire
profile at all times. If the profile picture is changed, it also would
be distorted and not a true representation of the actual profile.
When you make a change to the resistance, the Message
Center will show the current column and program maximum
levels of work.
8. During the program you will be able to scroll through the data in
the message window by pressing the Enter key.
9. When the program ends the Message Center will show a
summary of your workout. The summary will be displayed for a short time, then the
console will return to the start-up display.
Customer Service 1-888-707-1880
Email: [email protected]
17
Dyaco Canada Inc. 2013
Heart Rate Information
The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of
exercising comfortably. A great deal of this success has been promoted by the use of heart
rate monitors. With the proper use of a heart rate monitor, many people find that their usual
choice of exercise intensity was either too high or too low and exercise is much more
enjoyable by maintaining their heart rate in the desired benefit range.
To determine the benefit range in which you wish to train, you must first determine your
Maximum Heart Rate. This can be accomplished by using the following formula: 220 minus
your age. This will give you the Maximum Heart Rate (MHR) estimate for someone of your
age. To determine the effective heart rate range for specific goals you simply calculate a
percentage of your MHR. Your Heart rate training zone is 50% to 90% of your maximum
heart rate. 60% of your MHR is the zone that burns fat while 80% is for strengthening the
cardio vascular system. This 60% to 80% is the zone to stay in for maximum benefit.
For someone who is 40 years old their target heart rate zone is calculated:
220 – 40 = 180 (maximum heart rate)
180 x .6 = 108 beats per minute
(60% of maximum)
180 X .8 = 144 beats per minute
(80% of maximum)
So for a 40 year old the training zone would
be 108 to 144 beats per minute.
If you enter your age during programming the
console will perform this calculation
automatically. Entering your age is used for
the Heart Rate programs. After calculating
your MHR you can decide upon which goal
you would like to pursue.
The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training
for the heart and lungs) and weight control. The black columns on the chart above
represent the MHR for a person whose age is listed at the bottom of each column. The
training heart rate, for either cardiovascular fitness or weight loss, is represented by two
different lines that cut diagonally through the chart. A definition of the lines’ goal is in the
bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is weight
loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on a schedule
approved by your physician. Consult your physician before participating in any exercise
program.
With all our Heart Rate programs fitness bikes you may use the heart rate monitor feature
without using the Heart Rate program. This function can be used during manual mode or
during any of the nine different programs. The Heart Rate program automatically controls
resistance at the pedals.
Customer Service 1-888-707-1880
Email: [email protected]
18
Dyaco Canada Inc. 2013
Rate Of Perceived Exertion
Heart rate is important but listening to your body also has a lot of advantages. There are
more variables involved in how hard you should workout than just heart rate. Your stress
level, physical health, emotional health, temperature, humidity, the time of day, the last
time you ate and what you ate, all contribute to the intensity at which you should workout.
If you listen to your body, it will tell you all of these things.
The rate of perceived exertion (RPE), also know as the Borg scale, was developed
by Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20
depending upon how you feel or the perception of your effort.
The scale is as follows:
Rating Perception of Effort
6 Minimal
7 Very,very light
8 Very,very light +
9 Very light
10 Very light +
11 Fairly light
12 Comfortable
13 Somewhat hard
14 Somewhat hard +
15 Hard
16 Hard +
17 Very hard
18 Very hard +
19 Very,very hard
20 Maximal
You can get an approximate heart rate level for each rating by simply adding a zero to
each rating. For example a rating of 12 will result in an approximate heart rate of 120
beats per minute. Your RPE will vary depending up the factors discussed earlier. That is
the major benefit of this type of training. If your body is strong and rested, you will feel
strong and your pace will feel easier. When your body is in this condition, you are able to
train harder and the RPE will support this. If you are feeling tired and sluggish, it is
because your body needs a break. In this condition, your pace will feel harder. Again,
this will show up in your RPE and you will train at the proper level for that day.
Customer Service 1-888-707-1880
Email: [email protected]
19
Dyaco Canada Inc. 2013
Using Heart Rate Transmitter (Sold Separately)
Wearing The Chest Strap
1.
2.
3.
4.
5.
6.
Attach the transmitter to the elastic strap using the locking parts.
Adjust the strap as tightly as possible as long as the strap is not too
tight to remain comfortable.
Position the transmitter with the logo centered in the middle of your
torso facing away from your chest (some people must position the
transmitter slightly left of center). Attach the final end of the elastic
strap by inserting the round end and, using the locking parts,
secure the transmitter and strap around your chest.
Position the transmitter directly below the pectoral muscles.
Sweat is the best conductor to measure very minute heart beat
electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on the reverse
side of the belt and both sides of the transmitter). It’s also recommended that you wear the
transmitter strap a few minutes before your work out. Some users, because of body chemistry, have
a more difficult time in achieving a strong, steady signal at the beginning. After “warming up”, this
problem lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect performance.
Your workout must be within range - distance between transmitter/receiver – to achieve a strong
steady signal. The length of range may vary somewhat but generally stay close enough to the
console to maintain good, strong, reliable readings. Wearing the transmitter directly on bare skin
assures you of proper operation. If you wish, you may wear the transmitter over a shirt. To do so, wet
the areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it
automatically deactivates when it does not receive any activity. Although the transmitter is water resistant,
moisture can have the effect of creating false signals, so you should take precautions to completely dry the
transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement
battery is Panasonic CR2032.
Erratic Operation
Caution! Do not use this fitness bike for Heart Rate Programs unless a steady, solid Actual
Heart Rate value is being displayed. High, wild, random numbers being displayed indicate a
problem.
Areas to look for interference which may cause erratic heart rate:
1.
2.
3.
4.
5.
6.
7.
Microwave ovens, TV’s, small appliances, etc.
Fluorescent lights.
Some household security systems.
Perimeter fence for a pet.
Some people have problems with the transmitter picking up a signal from their skin. If you have
problems try wearing the transmitter upside down. Normally the transmitter will be oriented so the
logo is right side up.
The antenna that picks up your heart rate is very sensitive. If there is an outside noise source,
turning the whole machine 90 degrees may de-tune the interference.
Another Individual wearing a transmitter within 3’ of your machine’s console.
If you continue to experience problems contact your dealer.
Customer Service 1-888-707-1880
Email: [email protected]
20
Dyaco Canada Inc. 2013
Heart Rate Program Operation
Note: You must wear a heart rate transmitter strap (sold separately) for this program.
The Heart Rate program default setting is 60% of your projected maximum heart rate. The
60-80% range is more conducive for fat loss goals and 81-100% ranges are generally
used for cardiovascular conditioning goals and high intensity interval training.
To start the program follow the instructions below or just press the HR key, then press the
Enter button and follow the directions in the Message Center.
After selecting your heart rate target, the program will attempt to keep you at or within 3-5
heart beats per minute of this value. Follow the prompts in the Message Center to maintain
your selected heart rate value.
1. Press the HR key then press the Enter key.
2. The Message Center will ask you to enter your Age. You may enter your age, using the
Level Up/Down keys, then press the Enter key to accept the new value and proceed
on to the next screen.
3. You are now asked to enter your Weight. You may adjust the weight value using the
Level Up/Down keys, then press Enter to continue.
4. Next is Time. You may adjust the time and press Enter to continue.
5. Now you are asked to adjust the Heart Rate Target. This is the heart rate level you will
strive to maintain during the program. Adjust the level using the Level Up/Down keys,
then press Enter. Note: The heart rate that appears is based on the % you accepted in
Step 2. If you change this number it will either increase or decrease the % from Step 2.
6. Now you are finished editing the settings and can begin your workout by pressing the
Start key. You can also go back and modify your settings by pressing the Enter key.
7. If you want to increase or decrease the workload at any time during the program press
the Level Up/Down key. This will allow you to change your target heart rate at any time
during the program.
8. During the HR program you will be able to scroll through the data in the Message
Center by pressing the Enter key.
9. When the program ends you may press Start to begin the same program again or Stop
to exit the program.
Customer Service 1-888-707-1880
Email: [email protected]
21
Dyaco Canada Inc. 2013
General Maintenance
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two reasons:
I. The hardware was not sufficiently tightened during assembly. All bolts that were installed during
assembly need to be tightened as much as possible. It may be necessary to use a larger wrench
than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this point enough;
90% of calls to the service department for noise issues can be traced to loose hardware.
II. The crank arm nut needs to be retightened
III. If squeaks or other noises persist, check that the unit is properly leveled. There are 2 leveling pads
on the bottom of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust the
levelers.
Engineering Mode Menu
The console has built in maintenance/diagnostic software. The software will allow you to
change the console settings from English to Metric and turn off the beeping of the
speaker when a key is pressed for example. To enter the Engineering Mode Menu, press
and hold down the Start, Stop and Enter keys. Keep holding the keys down for about 5
seconds and the Message Center will display Engineering Mode Menu. Press the Enter
button to access the menu below:
a.
b.
c.
d.
Key Test (Will allow you to test all the keys to make sure they are functioning)
LCD Test (Tests all the display functions)
Functions (Press Enter to access settings and Up arrow to scroll)
i. Sleep Mode (Turn on to have the console power down automatically after 20
minutes of inactivity)
ii. Pause Mode (Turn on allow 5 minutes of pause, turn off to have the console
pause indefinitely)
iii. ODO Reset (Resets the odometer)
iv. Unit Type (Press enter to select ENGLISH or METRIC)
v. Beep (Turns off the speaker so no beeping sound is heard)
vi. Motor Test (Press Enter to run the resistance motor up and down in a
continuous loop. Display shows level setting and position sensor reading.
Press Stop to end test.)
vii. Safety
viii. Elliptical/Bike
ix. Incline On/Off (For e‧Glide this is always off)
Security (Allows the keypad to be locked to prevent unauthorized use)
Customer Service 1-888-707-1880
Email: [email protected]
22
Dyaco Canada Inc. 2013
Exploded View Diagram
Customer Service 1-888-707-1880
Email: [email protected]
23
Dyaco Canada Inc. 2013
Parts List
KEY #
1
2
3
4
5
6
7
8
9L
9R
10
11
12
13
14
15
16
17
18
19
19~1
19~2
19~3
19~4
19~5
19~6
19~7
19~8
19~9
19~10
19~11
19~12
19~13
19~14
19~15
19~16
19~21
20
23
24
25
26
27
28
29
30
PART #
832501
832502
832503
832504
832505
832506
832507
832508
832509L
832509R
832510
832511
832512
832513
832514
832515
832516
832517
832518
832519
832519-1
832519-2
832519-3
832519-4
832519-5
832519-6
832519-7
832519-8
832519-9
832519-10
832519-11
832519-12
832519-13
832519-14
832519-15
832519-16
832519-21
832520
832523
832524
832525
832526
832527
832528
832529
832530
Customer Service 1-888-707-1880
Email: [email protected]
Part description
Main Frame
Console Mast
Mast Handle bar Assembly
Seat Carriage
Seat Back Bracket
Seat Handle Bar
Rear Stabilizer
Crank Axle
Seat Wheel Adjustment Plate (L)
Seat Wheel Adjustment Plate (R)
Idler Wheel Assembly
Seat Stop Axle
Seat Position Latch
Backing Plate
Aluminum Track
Rack
Spacer for Stopper Axle
Rubber Foot
Transportation Wheel
Console Assembly
Console Top Cover
Console Bottom Cover
Battery Cover
Deflector Fan Grill
Wind Duct (L)
Wind Duct (R)
Water-resist Rubber
Fan Grill Anchor
LCD Transparent Piece
Console Speaker Cover (L)
Console Speaker Cover (R)
Fan Assembly
Console Display Board
Key Board
Interface Board
270m/m_W/Receiver, HR
Fan Grill Anchor
Drive Pulley
Ø32(1.8T)_Button Head Plug
Ø25.4 × 2.0T_Button Head Plug
Ø38_Seat Track Wheel
300m/m_Hand Pulse Sensor Assembly W/Cable
750.950m/m_Handpulse W/Cable Assembly(L,R)
Crank Arm End Cap
Front Shroud (L)
Front Shroud (R)
24
Dyaco Canada Inc. 2013
Qty
1
1
1
1
1
1
1
1
2
2
1
2
1
3
1
1
4
4
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
1
2
2
8
1
2
2
1
1
KEY #
31
32
33
34
35
36
38
39
40
42
43
44
45
46
48
49
50
51L
51R
52
53
54
55
56
59
61
62
63
64
65
66
67
68
71
72
73
75
76
77
78
79
81
82
83
84
85
86
87
PART #
832531
832532
832533
832534
832535
832536
832538
832539
832540
832542
832543
832544
832545
832546
832548
832549
832550
832551L
832551R
832552
832553
832554
832555
832556
832559
832561
832562
832563
832564
832565
832566
832567
832568
832571
832572
832573
832575
832576
832577
832578
832579
832581
832582
832583
832584
832585
832586
832587
Customer Service 1-888-707-1880
Email: [email protected]
Part description
Console Mast Cover
Handgrip End Cap
Bottom Cover
Round Disk
Rear Shroud (L)
Rear Shroud (R)
Drink Bottle Holder (R)
Drink Bottle Holder (L)
Release Lever
300m/m_Hand Pulse Sensor Assembly W/Cable
Gear Motor
750m/m_Computer Cable
2100m/m_Hand Pulse Sensor Assembly W/Cable
300m/m_Sensor W/Cable
750m/m_DC Power Cord
Front Shroud Plate (R)
Front Shroud Plate (L)
Crank Arm (L)
Crank Arm (R)
6004_Bearing
6203_Bearing
Drive Belt
Flywheel
Magnet
81 × 68m/m_Steel Cable
Seat
Steel Cable
Mesh Seat Back
Handgrip Foam
3/8" × 53m/m_Carriage Bolt
1/4" × 3/4"_Hex Head Bolt
3/8" × 4"_Hex Head Bolt
5/16" × 5/8"_Hex Head Bolt
3/8" × 1-3/4"_Hex Head Bolt
1/4" × 13 × 1T_Flat Washer
1/4" × 19 × 1.5T_Flat Washer
Ø17 × 23.5 × 1T_Flat Washer
5/16" × 18mm × 1.5T_Flat Washer
3/8" × 19 × 1.5T_Flat Washer
3/16" × 15mm × 1.5T_Flat Washer
Ø8 × Ø18 × 3T_Knurled Lock Washer
3/8" × 3/4"_Button Head Socket Bolt
5/16" × 1.5T_Split Washer
5/16" × 19 × 1.5T_Curved Washer
3/8" × 25mm × 2T_Flat Washer
Ø17_C Ring
Ø20_C Ring
M8 × 130m/m_J Bolt
25
Dyaco Canada Inc. 2013
Qty
1
4
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
2
2
4
2
8
4
1
4
1
7
13
1
4
1
8
2
2
1
2
1
KEY #
88
89
90
91
93
94
95
97
98
99
101
103
104
105
106
108
109
110
111
112
114
115
116
117
119
120
121
122
123
125
126
129
131
132
140
141
142
143
148
155
160
161
162
163
164
165
166
PART #
832588
832589
832590
832591
832593
832594
832595
832597
832598
832599
8325101
8325103
8325104
8325105
8325106
8325108
8325109
8325110
8325111
8325112
8325114
8325115
8325116
8325117
8325119
8325120
8325121
8325122
8325123
8325125
8325126
8325129
8325131
8325132
8325140
8325141
8325142
8325143
8325148
8325155
8325160
8325161
8325162
8325163
8325164
8325165
8325166
Customer Service 1-888-707-1880
Email: [email protected]
Part description
M8 × 7T_Nyloc Nut
3/8" × 7T_Nyloc Nut
1/4" × 8T_Nyloc Nut
5/16" × 6T_Nyloc Nut
M6 × 38m/m_Socket Head Cap Bolt
5/16" × 3/4"_Hex Head Bolt
M5 × 12m/m_Flat Head Socket Screw
Ø3 × 20m/m_Tapping Screw
M6 × 15m/m_Phillips Head Screw
M5 × 12m/m_Phillips Head Screw
5 × 16m/m_Tapping Screw
Ø3.5 × 16m/m_Sheet Metal Screw
Spring
Ø4 × 16m/m_Sheet Metal Screw
5/16" × 1-3/4"_Button Head Socket Bolt
M10 × 1.25m/m_Nut
3/8" × 7T_Nut
3/8" × 2"_Flat Head Socket Bolt
M5 × 10.Ø14 × 2T_Thumb Head Socket Screw
12/14m/m_Wrench
Phillips Head Screw Driver
Combination M5 Allen Wrench & Phillips Head Screw Driver
Pedal (L)
Pedal (R)
3/8"-UNF26 × 3T_Nut
3/8"-UNF26 × 4T_Nut
3/8"-UNF26_Nut
Drink Bottle (Optional)
Chest Strap (Optional)
Seat Carriage Cover
HGP Wire Grommet
M6_Nyloc Nut
Power Adaptor
14/15m/m_Wrench
Sensor Rack
Handle Bar Cover
3/8" × 4-1/4"_Hex Head Bolt
Seat Track Fixing Plate
Block
Velcro Tape
5/16" × 16 × 1.5T_Flat Washer
M6 × 10L_Flat Phillips Head Screw
Ø7 × Ø15 × 1.5T_Flat Washer
Sleeve
M6 × 19L_Nut
M6 × 10L_Button Head Socket Bolt
PU Wheel
26
Dyaco Canada Inc. 2013
Qty
5
9
4
2
1
6
10
4
8
13
8
14
1
4
2
2
8
4
8
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
2
6
4
4
4
4
4
4
KEY #
177
184
185
191
PART #
8325177
8325184
8325185
8325191
Customer Service 1-888-707-1880
Email: [email protected]
Part description
Qty
1
1
1
2
Rubber Foot Pad
13 × 23 × 3T_Nylon Washer
3/8" × 4T_Nut
3/8"_Cap Nut
27
Dyaco Canada Inc. 2013
Manufacturer’s Limited Warranty
Dyaco Canada Inc. warrants all it’s bike parts for a period of time listed below, from the date
of retail sale, as determined by a sales receipt or in the absence of a sales receipt. Dyaco
Canada Inc.’s responsibilities include providing new or remanufactured parts, at Dyaco
Canada Inc.’s option, and technical support to our independent dealers and servicing
organizations. In the absence of a dealer or service organization, these warranties will be
administered by Dyaco Canada Inc. directly to a consumer. The warranty period applies to
the following components:
Limited Warranty
Labor
1 Year
Parts
5 years
Frame/Brake
Lifetime
This warranty is not transferable and is extended only to the original owner.
The warranty shall not apply to exercise units which are (1) used for commercial or other
income producing purposes, or (2) subject to misuse, neglect, accident or unauthorized
repair and alterations.
This warranty provided herein is lieu of all other express warranties, any implied warranties,
including any implied warranties of merchantability of fitness for particular purpose, are
limited in duration to the first 12 months from date of purchase. All other obligations or
liabilities, including liability for consequential damages are hereby excluded.
REPAIR PARTS AND SERVICE
All of the parts for the Spirit elliptical shown in figure can be ordered from Dyaco Canada Inc.
6050 DON MURIE STREET, NIAGARA FALLS, ONTARIO L2G 0B3. When ordering parts,
the parts will be sent and billed at the current prices. Prices may be subject to change
without notice. Check or money order must accompany all orders. Standard hardware items
are available at your local hardware store.
To ensure prompt and correct handling of any errors, or to answer any questions, please
call our Toll Free number: 1-888-707-1880, or local number 1-905-353-8955 or fax
1-905-353-8968, email [email protected] or visit our website at www.dyaco.ca.
Office hours are from 8:30 AM to 5:00 PM Monday to Friday Eastern Standard Time.
Always include the following information when ordering parts
Model number
Name of each part
Part number of each part
Customer Service 1-888-707-1880
Email: [email protected]
28
Dyaco Canada Inc. 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement