Technics SA-EX140 User's Manual


Add to my manuals
20 Pages

advertisement

Technics SA-EX140 User's Manual | Manualzz
C
AV Control Stereo Receiver
Operating Instructions
Model No. SA-EX 140
E
i = Re =
Fo ot A fin
a -
a
= i
Pra E ry pi] Te: i E
EF a LR a Ш, цей я i S
Ea H TL r
яке 1 ="
Before connecting, operating or adjusting this product, please read
thase instructions complataly,
Pisase keep Ihis manual for future reference.
Po PC RQT5221-P
Dear Customer — THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Thank you for purchasing this product. CAUTION:
For optimum performance and safety, please read these This equipment has been tested and found to comply with the
instructions carefully, limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
b | f against harmful interference in a residential installation. This
la e O contents equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
Before use he
AERO se 7 cations. However, there is no guarantee that interference will not
ES a occur in a particular installation. If this equipment does cause
Concerning the remote control... romina nn nO harmful interference to radio or television reception, which can
Front panel CONtrols..........................eceererrenererrennererner rene nereene e. be determined by tuming the equipment off and on, the user is
5
Equipment connections erasers nesses O encouraged to try to correct the interference by one of the fol-
Antenna connections... renee lowing measures:
e Reorient or relocate the receiving antenna.
Basic operations .........................—.... reee TD 9 e Increase the separation between the equipment and receiver.
To adjust the tone quality ...............-——......——————-.- 0 ....————_ Y e Connect the equipment into an outlet on a circuit different
To adjust the sound DalANCE …….…...……rsssrrersarerernenenssraar ses ananas 9 from that to which the receiver is connected.
To mute the sound level .........cocoevieverirrerr 3 e Consult the dealer or an experienced radio/TV technician for
Listening to radio broadcasts ..........................e.eeee e... 10 help.
Sequential FUMING oss DO
Direct tuning ... crranse rentrer enenrenresesa anse ve rare era care ce nee rnrrerrennne 10 Any unauthorized changes or modifications to this equipment
Preset TUNING ………….….………rreccccccccerrsrserarareecercncasrsaveavracecnsarsccnee 1 would void the user's authority to operate this device.
Making a recording. pansrnersrenesraserrancassanerarenerenn carence ne nnne ra mnn ea nes 13 . , , :
Recording on à tape OK À 3 This device complies with Part 15 of the FCC Rules. Operation
Recording on a VCR.....................eeeee ns 13 is subject to the following two conditions: (1) This device may
To listen through headphones 13 not cause harmtul interference, and (2) this device must accept
Using the remote control — e any interference received, including interference that may cause
To operate the receiver. e... corrrrrssareassrerrren rss D À undesired operation.
To operate CD changers (or cD D PROS) 18
To operate a cassette deck .. sacusrrre naar rene nanes ras sare rennes ras ssrercees 10 WARNING:
To watch TV broadcasts... vrais ae 16
To watch video tapes...............-- reee 17 TO REDUCE THE RISK OF FIRE, ELECTRIC
To operate laser disc player .................een—— eee. UY SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPLIANCE TO RAIN, SPLASH-
Troubleshooting QUICE 18 ING, DRIPPING OR MOISTURE.
Listening CaUtiON ae 19 |
Maintenance …….…..……...….…….……………rscsseassarsassrerrrrensassanas screen 19 Î
Product service .. N ..... 19 CO ELECTRIC SHOCK MATCH WIDE
Technical specifications ... cenaresss nca Back Cover
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
User memo: CAUTI 0 N
DATE OF PURCHASE
DEALER NAME RISK Aia a
DEALER ADDRESS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
The model number and serial number of this product can be SERVICE PERSONNEL.
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for
future reference.
MODEL NUMBER ...SA:EX140 ere
SERIAL NUMBER .............e..e.enerrecericenariceco na ccceaa recae ner recae acer
The lightning flash with arrowhead symbol, within
.an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
| The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
2
ROTS221
Precautions
Before using this unit please read these operating instructions care-
fully. Take special care to follow the warnings indicated on the unit
itself as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
1. Power Source — The unit should be connected to power sup-
ply only of the type described in the operating instructions or as
marked on the unit.
2. Polarization — If the unit is equipped with a polarized AC power
plug (a plug having one blade wider than the other), that plug
will fit into the AC outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
3. Power Cord Protection — AC power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the plug
or cord if your hand is wet, and always grasp the plug body
when connecting or disconnecting it.
4. Nonuse Periods — When the unit is not used, turn the power
off. When left unused for a long period of time, the unit should
be unplugged from the household AC outlet.
Installation
| Environ ment |
1. Outdoor Antenna Grounding — If an outside antenna is con-
nected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and
built-up static charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1990, provides information with
respect to proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode. See figure below.
—— ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
[NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC—NATIONAL ELECTRICAL CODE
2. Water and Moisture — Do not use this unit near water-for
example, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
3. Heat — The unit should be situated away from heat sources
such as radiators and the like.
It also should not be placed in temperatures less than 5°C
(41°F) or greater than 35°C (95°F).
| Placement |
1. Ventilation — The unit should be situated so that its location or
position does not interfere with its proper ventilation. Allow 10
cm {4") clearance from the rear of the unit.
2. Foreign Material — Care should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject
this unit to excessive smoke, dust, mechanical vibration, or
shock.
3. Magnetism — The unit should be situated away from equipment
or devices that generate strong magnetic fields.
4. Stacking — Do not place heavy objects, other than system
components, on top of the unit.
5. Surface — Place the unit on a fiat, level surface.
6. Carts and Stands — The unit should be used only with a cart or
stand that is recommended by the manufacturer. The unit and
cart combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the unit and cart combi-
nation to overturn.
7. Wall or Ceiling Mounting — The unit should not be mounted to
a wall or ceiling, unless specified in this operating instructions.
Maintenance
Clean the cabinet, panel and controls with a soft cloth lightly moist-
ened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcoho! or benzine.
«а
. Damage Requiring Service — The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged; or
(b} Objects have fallen or liquid has been spilled into the unit; or
.(c) The unit has been exposed to rain; or
{d} The unit does not appear to operate normally or exhibits a
marked change in performance; or
{e} The unit has been dropped, or the enclosure damaged.
Servicing — The user should not attempt to service the unit
beyond that described in the operating instructions. All-other ser-
vicing should be referred to an authorized service personnel.
For the address of an authorized servicenter:
In the U.S.A. 1-800-211-7262 or web site
(ht{p:/www.panasonic.com)
In Canada 905-624-5505 or web site (www.panasonic.ca)
v
CAUTION
Do not place a tape deck or CD player on top of this unit.
Heat radiated from the top of this unit may cause damage to the
tape or CD software.
= NO
2
5
©
L
©
са
3
ROT5221
Before use Ш
ROTS221
R6, AA, UM-3
I= Remote control signal sensor
y ——— |
Transmission +
window ==
Avoid any obstacles
About 7 meters (23 feet) in front
of the signal sensor. (The actual
range will depend on the angle
at which the remote control is
used.)
Accessories I
Please check and identify the supplied
accessories.
@) [ AC power supply cord (RJAO065-A) ...............................1 PC.
( C]) AM loop antenna set (PSA0010) |
® AM loop antenna .. Citta o0narenzananeecarnerrnacarecccemaccms 1 PC.
e AM loop antenna holder prsvecinacinaccan neeeo ron arencanorecaremnes 1 PO,
® SCIBW .......... e. eeeeneecimme nie enneenccce acen manner 1 PO,
(© С] РМ indoor antenna (RSA0006) 1 pe.
d Г] Batteries... 2 PCS
[] Remote control transmitter (EUR644346)....................... 1 PC.
Use numbers indicated in parentheses when asking for replacement
parts.
(Only for U.S.A.)
To order accessories contact 1-800-332-5368 or web site
(htip:/www.panasonic.com).
The included AC power supply cord is for use with this unit only. Do
not use it with other equipment.
Concerning the remote control
Battery installation El
| Use of batteries |
e Align the poles (+ and —) properly when inserting the batteries,
e Do not mix old and new batteries or different types of batteries.
e Do not recharge ordinary dry cell batteries.
® Do not heat or disassemble the batteries. Do not allow them to
contact flame or water.
e Remove the batteries if the unit is not to be used for a long time.
* Do not keep together with metallic objects such as necklaces.
® Do not use rechargeable type batteries.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
if electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.
Correct method of use
| Operation notes |
® Do not place obstacles between the remote control signal sensor
and remote control unit.
® Do not expose the remote control signal sensor to direct sunlight
or to the bright light of fluorescent light.
e Take care to keep the remote control signal sensor and end of
the remote contro! unit free trom dust.
e |f this unit is installed in a rack with glass doors, the glass doors’
thickness or color might make it necessary to use the remote
control a shorter distance from the unit.
To prevent damage
e Never place heavy items on top of the unit.
® Do not disassembte or reconstruct the unit.
® Do not spill water or other liquids into the unit.
НА / LI
Front panel controls
[ Main unit E |
D Power “ DA" switch (POWER, On)
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
@ Tuning buttons (v TUNING A)
(3) Band select button (BAND)
(4) FM mode select button (FM MODE)
(6) Memory button (MEMORY)
© Preset channel buttons (v PRESET A)
(7 Remote control signal sensor (SENSOR)
® Display
(9) Muting button (MUTING)
(9 Volume contro! (VOLUME)
(D Headphones jack (PHONES)
(2 Speakers select button (SPEAKERS A/B/OFF)
(3 Input select buttons
(4 Tape monitor button (TAPE MONITOR)
(9 Tone controls (BASS, TREBLE)
(9 Balance control (BALANCE)
Before use E
| Remote control E]
(D Power button (POWER)
@ Input and Mode select buttons
(TV, VCR, TUNER, CD)
@ PP; PP button ( >> / >D1)
@ 44; << button ( -4/ <<)
® Channel. up/down buttons (v CH A)
(6) Muting button (MUTING)
(7) Volume buttons (- VOLUME +)
Mode select button (VDP) |
(9 Tape monitor button (TAPE MONITOR)
09 № button (MM)
MD < button ( 4)
(2 № button (>)
(3 Ant-TV/Ver button (ANT-TV/VCR)
(2 Disc/Deck 1/2 button (DISC/DECK 1/2)
(5 Direct tuning/disc enter button
(DIRECT TUNING/DISC ENTER)
(® Numbered buttons
5
RQT5221
Before use
RQT5221
Equipment connections
Stereo connection cable (not included)
White (L)
Red (R) po
(Ii >
[>
Do not place books, etc., on top of this unit or block the heat
radiation vents in any way.
To connect equipment, refer to the appropriate operating instructions.
Conserving power
The unit consumes 2 W even when it is turned off with [POWER].
To save power when the unit is not to be used for a long time, unplug it from the
household AC outlet.
AC power supply cord
Remember to reset the radio stations and any other memory items before using the (included)
unit again.
Connect this cord only
after all other cables and
cords are connected.
>
Only for turntable
with ground terminal
NN
Household AC outlet
{AC 120 V/60 Hz)
“SWITCHED”
AC OUTLET
QUTPUT
rl о)
Turntable (not included)
Video
Power to the outlet is con-
trolled by the power switch of
this unit. Audio equipment
rated up to 80 W can be con-
nected here.
connection
cables (not included)
QUTPUT
20000 oO <=
==]
o ay =a
Tt —
CD changer (or CD player)
(not included)
Speaker connections
Tape deck (not included)
+
VIDEO
. IN
REC (IN)! [PLAY (OUT) AUDIO AUDIO | VIDEO
S50 5 RE /
5 mL ° че
т т — © о еб
VCR {not included)
To prevent damage to circuitry, never short-circuit positive (+) and
negative (—) speaker wires.
(9) Front “A” speakers
Speaker impedance: 8 &
Speaker cables
(not included)
EA
Right speaker
(not included)
SG ©
Left speaker
(not included)
(b) Front “B” speakers
For connection to a second pair of speakers.
Speaker imp
о ©
a
Right speaker
(not included)
edance: 8 Q
Speaker cables
(not included)
5d =
Cy
®
о
Left speaker
(not included)
FM indoor antenna
{included)
= += = |= = = =
a Adhesive tape
Lema ==-
GND
im O
ANT
© A el ° AM loop antenna
(included)
e
AM ANT E
AM LOOP ANT
LÀ
| |
AO
hc
>
Screw (included)
Antenna connections
FM indoor antenna (included) A
This antenna is normally sufficient for reception of FM broadcasts.
Attach to a wall (using tape) facing in the direction of best reception.
For best reception sound quality
An FM outdoor antenna is recommended.
E AM loop antenna (included) E
This antenna is normally sufficient for reception of AM broadcasts.
install the AM loop antenna holder (included) at the rear panel of
this unit and then attach the AM loop antenna to the AM loop anten-
na holder (facing in the direction of best reception).
Pay attention to the following points when mounting the anten-
na.
e Do not mount it close to power cords, speaker wires or metal sur-
faces (Doing so will result in noise).
* Do not mount it close to a tape deck. When the tape deck is
being used, chirping or beeping sounds may result.
| When mounting the antenna to a column, a wall or rack ra
Mount the antenna so that the hinge is vertical.
0
un
3
©
2
©
Q
7
НОТ5221
Before use a
AQTA221
FM outdoor antenna
(not included)
75 © coaxial cable
(not included)
>
>
(1) Remove a piece of the outer
vinyl insulator.
J
20 mm (25/32") |
(2) Twist the shield braid to
X re wire, ;
expose the core wire Core wire
nes
Shield braid 10 mm (3/8")
E @ Connect the shield braid and the
[Sr core wire as shown at the left.
Ms . A
LA
Vinyl-covered wire
(not included)
| AM loop antenna |
(included)
N
AM ANT a
Té 2)
AM LOOP ANT
>
Antenna connections
FM outdoor antenna (not included)
The outdoor antenna should be used when using this unit in moun-
tainous areas or in spaces enclosed by reinforced concrete where
the FM indoor antenna (included) does not provide satisfactory
reception.
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
An outdoor antenna should be installed by a qualified technician
only.
AM outdoor antenna (not included)
An outdoor antenna should be used when using this unit in moun-
tainous areas or in spaces enclosed by reinforced concrete where
the AM loop antenna (included) does not provide satisfactory recep-
tion.
Stretch 5-12 m (16-40 ft.) of vinyl-covered wire horizontally across
a window frame or other convenient location, keeping it as high as
possible from the ground.
When the unit is not in use, disconnect the outdoor antenna to pre-
vent possible damage that may be caused by lightning. Never use
an outdoor antenna during an electrical storm.
Be sure to connect the AM loop antenna even when an outdoor
antenna is used.
Ly ER
II |
J
La
e
POWER
ФЛ
каз + наравне вянет кн кн тан анна ея вт ттт тран + на а фаны
PART a wv FAA AA FAA REA ENP ER PAN AER ARR A AAA AA ERA RFE RAAF AREA EN EAR ARAN
AFA тан нтв краев ван вен вт ттт те а кача иван анте вата TA
Basic operations
Before operation, set VOLUME to the “MIN” position.
1 Press [POWER].
Press [SPEAKERS] to select the speaker system
to be used.
Changes as follows each time the button is pressed.
SPEAKERS EY — SPEAKERS E — (OFF)
{ - .
Speakers A and B cannot be used at the same time.
Caution
Before selecting your speaker system, make sure imped-
‘ance is correct in the speakers you want to use.
(See page 6.)
Operations Be
Press to select the desired source, and start the
desired source.
(Refer to the appropriate operating instructions for details.)
VCR: To watch video tapes (VCR)
| TAPE MONITOR |: To listen to cassette tapes (The tape
monitor indicator will appear.)
(See below.)
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
Turn VOLUME to adjust the volume level.
After listening is finished
Be sure to reduce the volume level, and switch the power to the
standby condition by pressing [POWER].
| | When the tape monitor indicator is lit or Hashing PY |
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape, be sure to press
VOLUME
MIN MAX
[TAPE MONITOR)
A _—
[rape MONITOR)
в, НОНО НН ой
MUTING
<=
nar rT Ton
1 RAE LMULT 14
=
| TAPE MONITOR | and check the indicator goes out.
To adjust the tone quality EE
Turn [BASS] to adjust the low frequency sound.
Turn [TREBLE] to adjust the high frequency sound.
ra
To adjust the sound balance
Turn [BALANCE] to adjust the left/right sound balance.
To mute the sound level
Press [MUTING]. |
The message “MUTING ON NOW” runs repeatedly from right to left
across the display as long as the muting function is on.
Press once again to return to the previous volume level,
When the receiver is turned off, the muting operation will be auto-
matically cancelled.
RQT5221
Operations a
НАОТ5221
TUNER
тот оч кб ddA NE FART ERI FA FAS FT EFF FAA FEF AA FFA FAS AERA
чаи AAA FRE hd
QUARTI LOCK) STEREO
io
Inn
ta
TN
Бесс
ФО
OOOO
DI IO
JIJI
DOOD
OO
Ооо
TUNER
Listening to radio broadcasts
Sequential tuning LA
You can use the tuning buttons to tune-in radio broadcasts.
Press [TUNER].
Press [BAND] to select “FM” or “AM”.
Press [TUNING {(v) or (A}] to tune to the desired
broadcast.
FM: 0.2 MHz
AM: 10 kHz
"QUARTZ LOCK” lights up when tuned.
“STEREO” lights up when an FM stereo broadcast is
received.
Tuning intervals
To make an automatic search for broadcast stations
If [TUNING (v) or {A)] is held down for an instant until the fre-
quency begins to scroll, the broadcast stations can be tuned
in automatically when a broadcast station is found.
Tuning may stop automatically if any jamming is encoun-
tered.
If noise is excessive in the FM stereo mode
Press [FM MODE].
(The “STEREO” indicator will go out, and the “MONO” indicator will
light up.) :
The broadcast will be monaural, but noise will be reduced.
If the button is pressed once more, the stereo mode will be
resumed.
Direct tuning El
(Only available from the remote control.)
Specify the frequency using the numbered buttons on the remote
control transmitter to directly tune to the desired broadcast station.
First select between FM and AM with the [BAND] button on the
receiver.
Press [TUNER].
This will set the remote control to operate the tuner.
Press [DIRECT TUNING/DISC ENTER].
Press the appropriate numbered buttons to enter
y
f
A
f
TN
FERN
(approx. 10 seconds)
the frequency, while cursor display is flashing.
FM: 0.1 MHz
AM: 10 kHz
If the desired FM frequency is 107.9 MHz, press
[1] — [0] [7] [8]
If the frequency has been input correctly, the displayed fre-
quency will blink once.
t. If no button is pressed while the cursor display is flashing,
the display will return to the frequency which is currently
being received. To re-specify the frequency, repeat the
procedure from step 2.
2. If the frequency has not been input correctly, “ERROR”
will be displayed. In this case, re-enter the frequency.
Tuning intervals
MEMORY
| GUARTZ LOCK) STEREO
nai
Foot
ERR AEF ARF FFA RF FA RF FFF RN SIRNF IRN AEN A FAT ARERR FREE ER
slo
(A)
Listening to radio broadcasts
Preset tuning
Presetting radio stations into the memory channels of this unit
makes selecting stations simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new station is preset into a channel, the station previously
entered in that channel will be erased.
| Automatic memory presetting |
Automatic memory presetting allows this unit to search for stations
and then preset them into memory.
With this method, the channels that can be preset into the memory
are set as follows for different bands (FM or AM).
When FM stations are preset,
For FM stations .. ... A
When FM and AM stations a are e preset,
For FM stations ............... .ree==ererirrnericescerirerereerennccirerear e eeerrrreees 1-20
For AM Stations ...........—— REKERRRRKRRARERRKKRRARURE EKD ELEO KG 21-30
Set to the frequency from which you want to start
automatic memory presetting. (See page 10.)
Press [MEMORY] until the frequency begins to
change.
(Automatic memory presetting will start.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls. |
To stop, press [MEMORY] once again.
| When a broadcast station is preset #3
The memory indicator and the preset channel number will be dis-
played for approximately 1 second.
When presetting is completed
The last station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the broad-
cast waves are too strong or too weak. In such cases, carry out pre-
setting manually. (See page 12) .
=
+
Operations ня
НОТ 5221
Operations Е
ROT5221
QUARTZ LGCK STEREO
ona
в!
(17 1
il
Y PRESET A
С |
№
чат ви сатана ета ви Вт вай + ва ка в пая ва LUEUR EAU EEE
MEMORY
my
—
—.
DUARTE LOCK STEREO
ña
Hora
J
J
“=
"а
a
—
=
—
Y PRESET 7
= {J
CO Oo
/
J =
000 a LL
E
| |
Y т A
— LJ]
“=.
=.
“=
—
Preset channel
Listening to radio broadcasts
| | Manual memory presetting A | |
The-desired broadcast stations can be preset into the desired chan-
nels by the user.
Tune to the desired station.
(See page 10.)
If interference or static is keeping you from enjoying an FM -
broadcast, press [FM MODE] and change te monaural. You
can preset the memory in monaural just as in stereo.
Press [MEMORY].
To cance! the memory function, press [MEMORY] again.
Press [PRESET (v) or (A)] to select the desired
channel. |
Holding the buttons down lets you scroll through channels
faster.
Press [MEMORY].
The channel will blink on the display.
To continue presetting
_ Repeat steps 1 through 4.
| To listen to preset broadcast stations E] |
Press [PRESET (v) or (AY to select the desired channel.
Holding the buttons down lets you scroll through channels faster.
To confirm the channel number of the station
Press [TUNER].
(The channel number will be displayed for approximately 1 second.)
The channel number is not displayed if you change the reception
frequency or FM mode setting.
For your reference
Even if the power cord is disconnected from the household AC out-
let, the memory will retain its contents for approximately one month.
If preset channels are accidentally erased
Make the presettings once again.
The power cord should remain connected for one hour or more for
the memory back-up to be effective.
Making a recording
“Recording eu a tapé deck |
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.).
See the tape deck's operating instructions for details.
1 Select the source to be recorded.
Press any button except | TAPE MONITOR | to select the
source you want to record from.
Begin recording.
Follow your tape deck’s operating instructions.
Begin the source to be recorded. .
To check the sound recorded while a recording is being
[TAPE MONITOR] made El
—_
A ,[TAPE MONITOR)
Operations |
"a a оо '
With a tape deck with 3 head system, it is possible to check th
sound recorded on the tape.
Press | TAPE-MONITOR | on this unit and set the monitor but-
ton on the tape deck to “TAPE”.
Press | TAPE MONITOR. | once again to turn it off.
Before recording, prepare the VCR for recording (recording level
adjustment, input selector setting, etc.).
See the VCR's operating instructions for details.
| Recording from an audio source |
Select the audio source to be recorded.
Press either CD, TUNER or PHONO to select the source you
want to record from.
Recording from the tape deck is not possible.
D VOLE Begin recording on the VCR.
| Follow your VCR's operating instructions.
000 |o ——— f | |
SC o Ch Begin the audio source to be recorded.
{ | | | |
D mo OÖ ©
To listen through headphones B
(M) Use VOLUME to reduce the volume level.
(2) Connect the headphones.
Plug type: 6.3 mm (1/4 in.) stereo
© Use VOLUME to adjust the volume level.
y PHONES
VOLUME
Headphones
(not included) If you do not want sound from the speakers, press [SPEAKERS]
and check the speaker indicator goes out.
Avoid listening for prolonged periods of time to prevent hearing
damage,
MIN MAX
RQTS5221
Using the remote control
This remote control can be used to operate the receiver you purchased and some other Panasonic and Technics compact cassette decks, CD
changers (and CD players), TVs, VCRs, and VDP provided they are equipped with a remote control sensor.
Facing toward the receiver Basic operations
4 > Once the power has been set to ON, it
Lo arm the power las + las can be turned ON and OFF simply by
Ш pressing [POWER].
a ZN To select an input source
с :
=
o POWER | TY VCR VOP O
: NAL nen cn ui
O TUNER CD MONITOR | MM OOO
COC OCOD
Led >>> 4 > * PHONO can not be selected with this remote control.
(DE
e Selecting [TAPE MONITOR] turns ON the tape monitor function. Pressing it again or
aN another input select button turns the function OFF.
1 2 2 0 OSCENTER The message “MUTING ON NOW” runs repeatedly
CD CD CD Co) To mute the sound MUTING from right to left across the display as long as the
4 5 6 10 | level o muting function is on.
ED CD ED ED Press once more to return to the original volume.
7 B
EDDIE To adjust the volume —_ VOLUME +
level C )C J
MUTING | ‘Note |
CI VOLUME т After turning the power of the TV, VCR or laser disc player ON or OFF, always press
С DE ) [TUNER] before pressing [POWER] when turning the power of the receiver ON and OFF,
~~ | To listen to radio broadcasts
To switch the remote
control transmitter to TUNER Be sure to press this button before operating
| CD the receiver.
tuner operation mode
To select the desired
channel sequentially
(Preset tuning) OO
23 (Example: Channel 1)
POD,
To select the desired OOO - Е | wr |
channel directly OOOO ( xample: Lhanne 10)
(Preset tuning) Em Ow
. within 10 seconds
First select between FM and AM with the BAND button on
, , the receiver.
To select radio stations
(Example: 107.9 MHz)
by frequency AA
(Direct tuning) EE - =, = = C2102 0
OOOO
within 10 seconds
ROT5221
To operate CD changers (or CD players)
Turn the CD changer {or CD player) ON before trying to operate it by remote control.
Facing toward the CD changer
(or CD player)
17
TN
OOOH
MONITOR a
ua >>| < | >
CIC
ED,
Y CH A
- DIRECT TUNING
ODO
OOO
OOOD
MUTING
ED
— VOLUME +
( > CC )
sv 4
To switch the remote
control to CD changer
(or CD player) opera-
tion mode
e Ве sure to press this button before operating the
(>) CD changer or CD player.
To start play
>
«>
For 5 CD changer
GE DECK 1 2 а
D => = + О Select disc number.
For MEGA CD changer :: _
3.888 Lc
= =
[CD changer only] © DODO —
To start play from the Select disc number.
desired disc
{when selecting discs, the [210] button does
- not respond touch.)
For your reference
DRECT be - If you press this button instead of the [>]
button shown in the above procedure, the
CD changer will stop and display the disc
number. To start the disc, press [>].
oa à (Example: Track 1)
To start play from the © G — ès o
desired track DI (Example: Track 10)-
ооо BaD
44/44 bbbb]
To skip a track CO O
(Backward) (Forward)
To stop play
# “MEGA CD changer” means any Technics CD changer that
takes more than 50 discs.
RQT5221
Using the remote control
“To operate a cassette deck
Turn the cassette deck ON before trying to operate it by remote control.
Facing toward the cassette deck
Operations ВЕ
EOS
ANT-Tuivcn CEBIDECE
DRESS TUNING!
ENTER
IO
IO
OOOO
To switch the remote
control transmitter to Jia Be sure to press this button before operating
cassette deck opera- the cassette deck.
tion mode
Only when using a double Lo
The remote control indicator of the cassette
cassette deck arc, “deck will ch h time the button |
To select the tape deck e deck will change each time the utton is
(DECK 1/DECK 2) pressed
. 4 >
To start playback a (OO
(Reverse) (Forward)
To fast-forward or
rewind the tape
While the tape is stopped
44/44 DD!
DO
With TPS-equipped cassette decks, while the tape is play-
ing, you can move to the beginning or rend of a track by
pressing these buttons.
To stop playback
С
To watch TV broadcasts
The below procedures are examples for when a TV and VCR are connected as shown in this manual.
POWER УСА VDP
= en CIC
eG
OBO
Y CH A ANT-IVVCR in
CO CO CIC
OO OES
OOO
OOOO
MUTING
— VOLUME +
To watch TV broadcasts with justa TV
Facing toward the TV
TV POWER
O » O
. Switch ON the
power for TV.
Facing toward the TV
Set the TV/VIDEO 1 2, 3
mode on the TV v CH A > © >
to “TV”. DO "999
OO OO
Select the desired channel.
To watch TV broadcasts with a VCR tuner
Facing toward the TV
Facing toward the VCR
Facing toward
Set the
POWER ver POWER TV/VIDEO the receiver
OBO BOS > modem * SS
the TV to
power for TV. power for VCR. +
Facing toward the VCR
ww CH A © © ©
OO" 2.0
OO
Select the desired channel.
, Tv POWER
To switch OFF the power for TV O» O
To switch OFF the power for VCR D - D
How to use the antenna input selection button
ANT-TYACA
“TV” to “VCR” and vice versa.
Each time the button is pressed, the antenna input at the VCR changes from
ROT5221
Some TVs and VCRs cannot be operated with this remote control.
To watch video tapes
The below procedures are examples for when a TV and VCR are connected as shown in this manual.
UN
Facing toward the TV
TV POWER VCR POWER
OOo" Oo
Switch ON the Switch ON the
power for TV. power for VCR.
Facing toward the VCR
Facing toward
Set the the receiver
=) TV/VIDEO = .
mode on vCA
the TY to a
“VIDEO”.
TOMEN Ty vcn 1 ve Facing toward the VCR
CA » Playback
TUNER _CD Tor | m CD will begin.
<u<q P>>>l 4 > In the stop mode
COOCOHOICH = To fast-forward or rewind the video tape von [44/44 Di
Y GAZA MVA O» O
VCH
To stop playback
o © HES p play eo
OOOO | y POWER
; ; ; ; To switch OFF the power for TV O + (С
OOO
VCR POWER
itch
To switch OFF the power for VCR Co» (OO
To operate laser disc player
The below procedures are examples for when a laser disc player is connected to the “VCR"(IN) terminals of the receiver.
Facing toward the TV Facing toward the
laser disc player Set th
et the
TV POWER VDP POWER TV/VIDEO VCR
(UN OPT O?” 0” O > don ” (с
Switch ON the Switch ON the DE"
PER 0 „жа E power for TV. power for laser -
disc player. 4
TUNER со
с с © |
SC a cS С Facing toward the laser disc player
YDP
OE) rito. 5 GS
SS Inthe play mode
To search for the desired position УОР [44744 PDD
D D D - | Ow (OOO
7 8 9 0
OOOO wpm
To stop pla
Pray O» O
MUTING , TV POWER
ED To switch OFF the power for TV O» O
— VOLUME +
( ) ) To switch OFF the power for laser disc УБР POWER
player OO =» OO
+
Operations
YA
AOTS221
Troubleshooting guide
Before requesting service for this unit, check the chart below for a — For detailed instructions, contact an authorized servicenter in
possible cause of the problem you are experiencing. Some simple the U.S.A. and Panasonic Canada Inc. Customer Care Centre in
checks or a minor adjustment on your part may eliminate the prob- Canada.
lem and restore proper operation. in the U.S.A. 1-800-211-7262 or web site
If you are in doubt about some of the check points, or if the reme- (http:/www.panasonic.com)
dies indicated in the chart do not solve the problem, refer to the . In Canada 905-624-5505 or web site (www.panasonic.ca)
directory of Authorized Service Centers {enclosed with this unit) to
locate a convenient service center, or consult your dealer for
instructions.
Reference pages indicated in black circles. (For example: O)
|. Problem | Probable cause(s)
Suggested remedy
While listening to FM broadcasts
heard when listening to the | used for modulation of FM stereo broadcasts is
broadcast in stereo, but not | different than that used for monaural broadcasts.
heard when listening
monaurally.
An unusual hissing noise is | A slight noise may be heard because the method
Noise is excessive in both Poor location and/or direction of the antenna.
stereo and monaural broad-
casts. Transmitting station is too far away.
Try reducing the treble sound by using the treble
control. (©)
Try changing the location, height and/or direction
of the antenna. (@ ©)
If an indoor antenna is being used, change to an
outdoor antenna. (©)
Try using an antenna with more elements.
The FM stereo indicator or
Poor location and/or dire tion of the antenna.
the quartz lock indicator © a a ©
Reference BN :
flickers, without completely N ;
illuminating. Transmitting station is too tar away.
Excessive distortion in the Nearby building or mountain.
sound of stereo broadcasts.
Try changing the location, height and/or direction
of the antenna. {@ ©)
If an indoor antenna is being used, change to an
outdoor antenna. (O)
Try using an antenna with more elements,
| While listening to AM broadcasts
heard. sion set.
An unusual “beat” sound is ‘| Unit is being used at the same time as the televi-
Turn off the television set, or use this unit farther
away from it.
Interference from adjacent broadcast signal.
Try reducing the treble sound by using the treble
control. (O)
A low-pitched “hum” sound | The AM loop antenna connection wires are 100
is heard when the broad- close to the power cord.
Place the antenna connection wires and the
power cord farther apart.
motors, rectification equipment, etc.).
cast is tuned. The power supply frequency from the power cord | * Install a special outdoor antenna. (6)
is modulated-and heard from the speakers.
A strange hissing noise is Caused by the “discharge phenomenon” and the e Try placing this unit farther away from such equip-
produced continuously or “oscillation phenomenon” of electric appliances ment,
intermittently. {such as fluorescent lights, TV, small series-type
Common problems
| Power will not switch ON. The power cord plug is not completely inserted.
Confirm that the power cord plug is connected
completely.
No sound is heard. The speaker indicator is turned off.
Turn on the speaker indicator. (9)
The tape monitor function is ON.
Press the tape monitor button. (0)
The muting function is ON.
Press the muting button. (©)
Connections are incomplete or incorrect to the
speaker systems, etc. '
* a e".
Check to be sure that all connection wires are
correctly connected. (O)
The incorrect input selector has been pressed.
Check to be sure that the correct selector is
pressed. (©)
Sound stops during a per- The protection circuitry has functioned because
formance, or no sound is the positive and negative speaker connection
heard when the power is wires are “shorted,” speaker systems with an
switched ON. impedance less than the indicated rated imped- *
{The word “OVERLOAD” ance of this unit are used or under severe use,
appears on the display.) such as loud volume, excessive power and in an
| excessively hot environment.
Switch off the power, and after determining and
correcting the cause, switch on the power once
again.
Use a speaker system of the proper impedance
rating. (9)
RQT5221
- Listening caution
Selecting fine audio equipment such as the unit you've just pur-
chased is only the start of your musical enjoyment. Now it's time to
consider how you can maximize the fun and excitement your equip-
ment ofters. This manufacturer and the Electronic industries
Association's Consumer Electronics Group want you to get the most
out of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or dis-
tortion-and, most importantly, without affecting your sensitive hear-
ing.
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
e Start your volume control at a low setting.
e Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
e Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
— Maintenance
To clean this unit, wipe with a soft, dry cloth, ;
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
® Never use alcohol, paint thinner or benzine to clean this unit.
e Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Product service
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
| Product information
For product service, product information or assistance in product
operation, refer to the servicenter directory.
Reference E
НОТ5221
Technical specifications (HF78)
EH AMPLIFIER SECTION
Rated minimum sine wave
RMS power output
40 Hz-20 kHz both channels driven
0.8% total harmonic distortion |
100 W per channel (8 Q)
1 kHz continuous power output
both channels driven
0.8% total harmonic distortion
Total harmonic distortion
rated power at 40 Hz-20 kHz
half power at 1 kHz
103 W per channel (8 Q)
0.8% (8 Q)
0.07% (8 Q)
Low frequency damping factor 30 (8 Q)
Load impedance
À or B 80
Dynamic headroom 2 dB (8 Q)
SMPTE intermodulation distortion 0.3%
Frequency response
PHONO RIAA standard curve 10.8 dB
CD, TAPE, VCR
Input sensitivity
PHONO 0.4 mV (3 mV, IHF'66)
10 Hz-70 kHz, +3 dB
CD, TAPE, VCR 27 mV (200 mV, 1HF'66)
S/N (IHF A)
PHONO 70 dB (78 dB, IHF'66)
CD, TAPE, VCR
Input impedance
75 dB (83 dB, !НР'66)
PHONO 47 Ко
CD, TAPE, VCR 22 ко
Tone controls
BASS 50 Hz, +10 to —10 dB
TREBLE 20 kHz, +10 to —10 de
B FM TUNER SECTION
Frequency range 87.9-107.9 MHz
Sensitivity 11.2 dBf (2 nV, IHF'58)
50 dB quieting sensitivity
MONO 18.3 dBf (4.5 uY, IHF'58)
STEREO 38.3 dBf (45 pV, IHF'58)
Total harmonic distortion
MONO 0.2%
STEREO 0.3%
S/N
MONO 75 dB
STEREO : | 70 dB
Frequency response 20 Hz-15 kHz, +1 dB, —2 dB
Alternate channel selectivity 65 de
Capture ratio 1 de
Image rejection at 98 MHz | 44 dB
IF rejection at 98 MHz 80 dB
Spurious response rejection at 98 MHz 75 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
10 kHz 30 dB
Carrier leak
19 kHz я —35 dB
38 kHz —50 dB °
Antenna terminal 75 Q (unbalanced)
ΠAM TUNER SECTION
Frequency range 530-1710-kHz
Sensitivity 20 pV, 330 pvVim
Selectivity 55 dB
Image rejection at 1000 kHz 40 dB
IF rejection at 1000 kHz 60 dB
E GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 155 W
Dimensions (WxHxD) 430x136x312 mm
(16-15/16"x5-11/32"x12-9/32")
Weight 6.4 kg (14.1 Ib.)
Power Consumption in standby mode: 2 W |
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer,
Panasonic Consumer Electronics
ED
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way Secaucus,
New Jersey 07094
http:/www.panasonic.com
© 1999 Matsushita Electric Industrial Co, Ltd.
Printed in Malaysia
Panasonic Sales Company,
Division of Matsushita Electric of
Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
Law 2T3
www.panasonic.ca
RQT5221-P
H1199MC0 (D)

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals