www.etiltd.co.uk
Electronic Temperature Instruments Ltd
Small, compact & practical design
Four models 0.1°C, 0.1°F, 1°C or 1°F
Fast response time
Clear easy to read display
Supplied with penetration probe
Integral hinged battery cover
Low battery & open circuit indication
Robust & durable
The Thermamite digital thermometers utilise tried and tested electronic circuitry, designed for reliability and ease of use,
ready to take fast, accurate measurements anytime, anywhere. Styled to fit into the palm of the hand, the thermometers
incorporate a clear digital display with a precise read-out of temperature over the range of -49.9 to +199.9°C or -30 to
+300°C with a 0.1°C or 1°C resolution (°F models are also available). Both low battery and open circuit indication are also
displayed when applicable.
Each thermometer is supplied complete with a permanently attached rigid, stainless steel penetration probe and 500mm
connecting lead. The instrument is powered by a standard 9 volt PP3 battery with a minimum life expectancy of 500 hours
continuous use. The electronics are housed in a two-part high impact ABS moulded case which incorporates an integral
battery compartment complete with a retained battery cover, designed to cope with routine day-to-day usage. An optional
wall bracket and a protective PVC boot is available. The Thermamite thermometers are also available in a variety of colourcoded cases, blue, white, yellow, green, red, brown and black.
Order code
model
262-051
Thermamite 1 °C
Thermamite 1 °C - hand held digital
262-551
Thermamite 1 °F
Thermamite 1 °F - hand held digital
description
261-055
Thermamite 5 °C
Thermamite 5 °C - hand held digital
261-555
Thermamite 5 °F
Thermamite 5 °F - hand held digital
Thermamite 1
Thermamite 5
-49.9 to 199.9°C (-49.9 to +199.9°F)
-30 to +300°C (-25 to +575°F)
0.1°C or 0.1°F
1°C or 1°F
±1°C ±0.5%
±1% ±1 Digit
PT100
K Thermocouple
0 to +50°C
0 to +50°C
n/a
Transistor
n/a
±0.05°C/°C (0.1°F/°F)
9 Volt MN1604/PP3
Approximately 500 hours
12.7mm LCD
121 x 68 x 25mm (h x w x d)
ABS plastic
∅3.3 x 108mm (pointed penetration probe)
304 Stainless steel
140 grams
warranty & guarantee
The above instruments carry a two-year warranty and guarantee against defects in components or workmanship. During
this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge.
This warranty does not apply to probes, where a six-month period is offered. In line with our policy of continuous
development, we reserve the right to amend our product specification without prior notice.
These instruments comply with the EMC Directives
EN 5008-1 : 1992, EN 50082-1 :1992
Electronic Temperature Instruments Ltd
Dominion Way Worthing West Sussex BN14 8NW
Tel: +44 (0)1903 202151 Fax: +44(0)1903 202445 Email: [email protected]
www.etiltd.co.uk
Specification
temperature range
resolution
accuracy
sensor type
ambient temp. range
CJC type
CYC stability
battery
battery life
display
case dimensions
case materials
probe dimensions
probe material
weight
Thermamite 1 & 5 - hand held digital
Specialists in the manufacture of temperature measuring equipment
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement