Data Sheet | ABB TK503 Programming Cable Datasheet

Add to My manuals
1 Pages

advertisement

ABB TK503 Programming Cable Datasheet | Manualzz

TK503 Programming Cable Page 1 of 1

TK503 Programming Cable

- PC-side: USB connector type A

- AC500-side: SUB-D, 9-pin, male

- Length 3 m

Contents

Intended Purpose

Electrical Connection

Technical Data

Ordering Data

Intended Purpose

The TK503 Programming Cable connects the USB interface of a PC with the serial interface of an AC500 CPU. It is used for programming purposes.

The Programming Cable TK503 can be used with all AC500-CPUs.

NOTE

With AC500-CPUs, only the ABB programming cables TK50x can be used. Other cables may cause communication faults and must not be used.

NOTE

Electrical Connection

1. Install the device driver for the TK503 Programming Cable. The driver and a detailed installation description can be found on PS501 CD in directory l CD_AC500\Driver\TK503 (PS501 V1.3.x) l CD_AC500\Driver\TK503_TK504 (PS501 V2.0.0 and above)

NOTE

Once you have installed the device driver of the cable in your Windows system, make sure that you use always the same USB port of your computer. Otherwise, Windows will ask you to install the driver a second time if you connect the cable to a different USB port of your computer.

2. Plug the 9-pin Sub-D plug to the connector at the AC500-CPU and tighten it there.

3. Plug the USB connector to an USB interface at your PC.

Technical Data

The System Data of AC500 and S500 are valid here. Only additional details are therefore documented below.

Connector at the PC (USB interface)

Connector at the AC500 CPU

Length

Cable type

Weight

USB connector type A

SUB-D, 9-pin, male

3 m

On Request

On Request

Ordering Data

Ordering No.

1TNE 968 901 R1100

Scope of delivery

TK503, Programming cable USB -> SUB-D (RS485), length 3 m

© Copyright 2005-2013 ABB. All rights reserved. Documentation Revision V2.3.2 Date of issue: 2014-02-14 mk:@MSITStore:C:\Program%20Files%20(x86)\3S%20Software\CoDeSys%20V2.3...

26-11-2014

advertisement

Key Features

  • USB connector type A
  • SUB-D, 9-pin, male connector
  • Length 3 m
  • Works with all AC500-CPUs
  • USB driver is required
  • Driver is available on PS501 CD

Related manuals

Frequently Answers and Questions

What is the purpose of the TK503 Programming Cable?
The TK503 Programming Cable connects the USB interface of a PC with the serial interface of an AC500 CPU. It is used for programming purposes.
What is the connection type on the PC side of the cable?
The TK503 Programming Cable has a USB connector type A on the PC side.
What is the connection type on the AC500 CPU side of the cable?
The TK503 Programming Cable has a SUB-D, 9-pin, male connector on the AC500 CPU side.
What is the length of the TK503 Programming Cable?
The TK503 Programming Cable is 3 meters long.
Will other cables work with an AC500 CPU?
No, only ABB programming cables TK50x can be used with AC500-CPUs. Other cables may cause communication faults and must not be used.
Download PDF

advertisement