Dust measuring instrument STM 225 - AFRISO-EURO

Dust measuring instrument STM 225 - AFRISO-EURO
Dust measuring instrument
STM 225
The compact solution for particulate matter measurement.
MULTILYZER STe
MULTILYZER NG
Certified
suitability for
stages 1 + 2,
including
150 mg/m³
Compact. Complete. Free from wear.
The practical solution for measurements of
particulate matter on solid-fuel systems
The increasing number of solid fuel systems such as systems
fired with pellets or wood chips along with environmental considerations has brought about new and more stringent emission
protection regulations. AFRISO provides chimney sweeps, heating system engineers, service technicians and other professionals
with the right equipment to meet the new challenges involved in
measuring the emissions of solid fuel systems.
The new AFRISO dust measuring instrument STM 225 was specially designed for mobile use on heating systems; it is approved
for stages 1 and 2 as per German regulations, including limit value monitoring 150 mg/m3 for old systems. The compact, robust
measuring system determines the dust concentration by means
of a state-of-the-art optical scattered light method. This measuring principle provides for fast and accurate measuring results and
also allows for real-time diagnostics – independent of external influences such as shocks and impacts. A great feature considering
rough field service conditions.
Description
Robust, compact measuring system for mobile use, consisting of
measuring instrument and sampling probe for the flue gas channel of the heating system. The AFRISO dust measuring instrument
determines the particle/dust concentration using a state-of-theart optical measuring principle without consumables. The particle/dust concentration is then displayed as a mean value (duration: 15 minutes). Continuous measurements are also possible.
The sampling probe can also be used for tightness tests of the
entire gas path.
i
The European Renewables Directive 2009/28/EC requires EU
member states to produce an increasing proportion of their
energy consumption from renewable sources. As a result, the
proportion of solid fuel systems such as systems fired with
pellets or wood chips is on the rise – and so is the necessity to
check the emissions of such systems for compliance with the
respective emission protection regulations.
Technical specifications
Measuring range
0/300 mg/m³ dust
Degree of protection
IP 40
O2: 0/21 % by volume
COH2: 0/4,000 ppm
CO: 0/20,000 ppm
Display
Colour touch display,
5.7" (14.5 cm)
Measuring resolution
0.1 mg/m³
Supply voltage
AC 230 V, 50 Hz
Operating temperature
range
Ambient:
5/40 °C
Storage: -20/+50 °C
Interfaces
USB, Bluetooth
Housing (W x H x D)
190 x 275 x 330 mm
Approvals
Certified suitability for stages
1 + 2, including 150 mg/m³
Weight
Approx. 7.5 kg
Transport bag
Light-weight heavy-duty
with carrying strap and handle
Measured values
(via Multilyzer NG/STe)
Highlights
There are many reasons to opt for the best …
Technology:
Future-proof:
Optical measuring principle
Free software updates
Measuring results:
Traceability:
Absolutely reliable measuring
results, not influenced by
interference (e.g. shocks)
Permanent indication of the
current measured values
Time savings:
Short setup time due to
fast heat-up and calibration
phase
Operation:
Intuitive via menu-guided
measuring sequences
MULTILYZER NG
Visualisation via 5.7"
colour touch display
...or "just" because of the many options for measuring
particulate matter emissions of solid fuel systems.
Connectivity:
Excellent connectivity of flue gas
analyser MULTILYZER NG/STe via
Bluetooth/Bluetooth Smart®
Back
Connection socket
sampling probe
Gas input, connection
sampling probe
Condensate collector with
water trap
Particle filter for pump
Gas outlet
Condensate outlet
Holder for sampling probe
USB interface for manufacturer
servicing (e.g. software updates)
MULTILYZER STe
Easy to read:
Best price/performance ratio
Dust measuring instrument-packages 2014
Package 1
Dust measuring instrument
STM 225
without MULTILYZER NG
Scope of delivery:
ust measuring instrument
D
STM 225
Calibration report
Zero point filter
Mains plug
Transport bag
Infiltec fine filter (5 pieces)
Teflon membrane (5 pieces)
ampling system with heatS
ed line, connection line and
condensate filter cartridge
KFP
sting
You can use your exi
h
wit
NG
R
ZE
MULTILY
-cells
O2 / CO4,00 0 / CO20,0 00
and Bluetooth
leaning kit consisting of 5
C
cleaning swabs, 5 cleaning
cloths and 1 cleaning brush
Package 2
Package 3
Dust measuring instrument
Dust measuring instrument
STM 225
STM 225
with MULTILYZER NG
with MULTILYZER STe
Scope of delivery STM like package 1
Scope of delivery STM like package 1
MULTILYZER NG including:
ith O2, COH2, CO20,000,
W
T gas, T air, draft, differential pressure and Bluetooth
interface BTS-M
MULTILYZER STe including:
ith O2, COH2, CO20,000,
W
T gas, T air, draft, differential pressure and Bluetooth
Smart interface
Calibration report
Protective sleeve for
device with magnets
Infiltec fine filter (5 pieces)
Ambient air probe
Power supply unit
Dust measuring
instrument STM 225
co sensor with extendE
ed service life and short
calibration phase
Monthly leasing rate
(term 36 months)
Infiltec fine filter (5 pieces)
Ambient air probe
Package 2
Package 3
•
•
•
•
•
MULTILYZER STe
Price
Power supply unit
Package 1
MULTILYZER NG
Part no.
Calibration report
Protective sleeve for
device with magnets
70200
802014
902014
5,595.00
6,745.00
7,560.00
172.89
208.42
239.00
All prices in €, excluding applicable VAT. Subject to our Terms and Conditions.
Fax to +49 7135 102-209
My binding order:
Dust measuring instrument packages 2014
Part no.
Price
Package 1: Dust measuring instrument STM 225 without MULTILYZER NG
70200
5,595.00
Package 2: Dust measuring instrument STM 225 with MULTILYZER NG
802014
6,745.00
Package 3: Dust measuring instrument STM 225 with MULTILYZER STe
902014
7,560.00
Options/accessories
Part no.
Price
Sampling probe, straight, 280 mm
119.
70211
168.00
70210
11.85
511018
19.80
Infiltec fine filter (price per piece € 4.75, PU 5 pieces) as pump filter
511003
23.70
Base handle AWS-B for interchangeable probes
with compensation line and draft connection, without KFP
500295
112.00
Condensate filter cartridge KFP
500190
72.00
Interchangeable probe AWS-S 300 mm
570074
64.00
570073
82.00
570083
73.00
570080
78.00
570079
131.00
500141
125.00
500147
104.00
Teflon membrane (10 pieces)
511004
15.60
Thermal printer EUROprinter BLE, Bluetooth Smart and infrared interface
523525
329.00
Thermal printer EUROprinter, infrared interface
522394
228.00
Suitable for
STM 225
70202
Sampling probe, straight, 400 mm
Cleaning kit, consisting of 10 cleaning swabs, 10 cleaning cloths, 2 cleaning brushes
Suitable for
MULTILYZER NG / STe
Hand-operated ball pump with connection hose
Interchangeable probe AWS-S 180 mm
Annular gap probe AWS-R
Multi-hole probe AWS/M
Flexible probe AWS-F 400 mm
Combustion air probe TFB-VL100 M, with magnetic holder
Combustion air probe TFB-VL-1 200 mm
Total
M
aintenance contract for
MULTILYZER NG / STe
Annual service for reliable operation of your measuring instrument: Full function test, device calibration, inspection and,
if necessary, replacement of the O2 and CO measuring cell.
The basic maintenance contract can be extended to cover
additional measuring cells.
Please send me a leasing offer.
Company
Department
Included:
T
est bench check / adjustment of gas tem perature, air temperature, draft, differential
Name
pressure
Software updates
Basic cleaning of housing
City
E-mail
Cleaning of sensor block and pump
Check of all seals and hose connections
Street
Check of PCB
C
leaning and check of controls, connectors
and probe elements
Post Code
Service and inspection certificate
Telephone
Date
Fax
Signature
00
Number
Number
Accessories
Thermal printer
EUROprinter
Infrared interface
Part no. 522394
Sampling probe, straight
280 mm, for STM 225
Part no. 70202
228.00
119.00
Thermal printer
EUROprinter BLE
With Bluetooth Smart interface
and infrared interface
Part no. 523525
Cleaning kit
Consisting of 10 cleaning
cleaning swabs, 10 cleaning
cloths, 2 cleaning brushes
329.00
Part no. 70210
Combustion air probe TFB-VL 100 MG
With magnetic holder and rubber cone
Part no. 500141.1
11.85
125.00
Accessories MULTILYZER NG/STe:
Interchangeable probes, suitable for base handle
Interchangeable probe AWS-S
Suitable for base handle,
300 mm, Ø 8 mm
64.00
Part no. 570074
Annular gap probe AWS-R
Part no. 570083
112.00
Base handle AWS-B
for interchangeable probes
With compensation line and draft
connection, without condensate
filter cartridge KFP
Multi-hole probe AWS-M
Length-adjustable 60 - 170 mm, Ø 8 mm
73.00
75.00
Part no. 570080
Part no. 500295
Condensate filter cartridge KFP
Part no. 500190
72.00
Interchangeable probe AWS-S
180 mm, Ø8 mm
82.00
Part no. 570073
All prices in €, excluding applicable VAT. Subject to our Terms and Conditions.
Easy operation with
menu-guided measurements:
www.einfach-stark.net/stm225
Ident-Nr. 991517 06777 03/14
Your dealer
Technology for Environmental Protection
Measuring. Controlling. Monitoring.
AFRISO-EURO-INDEX GmbH ∙ Lindenstr. 20 ∙ 74363 Güglingen ∙ Germany ∙ Phone +49 7135 102-0 ∙ Fax +49 7135 102-147 ∙ [email protected] ∙ www.afriso.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement