Annex no. - Accreditation Unit

Annex no. - Accreditation Unit
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Chemical Products
Paints and Varnish
SASO-818-1994 - Alkyd based undercoating paints for general purposes
SASO-820-2010 - Aluminum Paints for general purposes
SASO-2705-2007 - Paints and varnishes solvent based acrylic enamel paints
SASO-2832-2011 - Paints and varnish – Polyurethane primer surfacer
SASO-2703-2007 - Paints and varnish - Nitrocellulose paints - colored base
SASO-471-2002 - Paints and varnishes - Alkyd flat paints
SASO-2833-2011 - Paints and varnishes - Solvent based polyurethane paints
SASO-2060-2002 - Paints and varnishes - Emulsion Primers
SASO-944-1998 - Paints and Varnishes - Glass beads for road marking Paints
SASO-819-1994 - Road Marking Paints
SASO-2626-2006 - Paint and Varnishes - water based texture paints
SASO-2627-2006 - Paints and Varnishes - Roof Coating (water based)
SASO-2834-2011 - Paints and Varnishes – Solvent based polyurethane clear
SASO-2831-2011 –Paints and varnishes – Polyurethane clear sanding sealers
Batch certification
according to SA71
SASO-2704-2007 - Paints and Varnish - Nitrocellulose paints - Nitrocellulose
finishing colored paint
SASO-2702-2007 - Paints and Varnish - Nitrocellulose paints - Transparent cellar
SASO-470-2016 - Paints and Varnishes - Emulsion paints
SASO-472-2002 - Paints and varnishes - Gloss and semi-gloss alkyd enamel paints
SASO-817-1994 - Primary paints
SASO-GSO-EN-12004:2011 Adhesives for tiles. Requirements, evaluation of
conformity, classification and designation
Adhesives
Batch certification
according to SA71
SASO-2070-2010 - Adhesives for general purposes
Tooth Brushes
SASO-1790-2000 - Tooth Brushes
Page (1) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Cosmetics (All
Kinds with
Exclusion of
Medical Products
of Therapeutically
Effects)
Soap (All Types
Including Medical
but Excluding that
have Therapeutic
Purposes)
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-GSO-1943-2009 Cosmetic products - the cosmetic products (safety)
Regulations
SASO-2614-2010 - Cosmetics -Toiletries - Industrial hand cleaners (Petroleum
solvent type)
SASO-1744-2000 - Cosmetic products - Chemical depilatories
SASO-1750-2000 - Talcum powder
SASO-585-2001 - Regulations for perfumery products based on ethanol.
SASO-2807- 2010 - cosmetics - Hair Fixative
SASO-ISO-22715-2008 - Cosmetics -- Packaging and labeling
SASO-ISO-22716-2008 - Cosmetics -- Good Manufacturing Practices (GMP) -Guidelines on Good Manufacturing Practices
SASO-1389-1998 – Vaseline petroleum jelly
SASO-1846-2011- cosmetic products – alkohl
SASO-2186-2009 - Cosmetic Products - Nail polish (Nail Enamel) - Specification
SASO-777-2009 - Cosmetic Products - Oxidation Hair Dyes, Liquid, Gel and
Cream - Specification
SASO-725-2010 - Cosmetic Products - Hair shampoo
SASO-2823-2011 - Cosmetic Products - Henna
SASO-1794-2000 -Cosmetic Products - Deodorants
SASO-1871-2009 - Cosmetics-Lip sticks
SASO-1514-1999 - Hair cream
SASO-1512-2010 - Skin creams
SASO-1788-2000 - Cosmetic Products - Hair oils
SASO-GSO-2240-2012 - Cosmetic Products - Synthetic detergents - Liquid soap
for hands
SASO-GSO-2063-2010 - Cosmetic Products - Hair Conditioner (Balsam)
SASO-1387-1998 - Shaving cream
Batch certification
according to SA72
SASO-1187-1998 - Soap flakes
SASO-GSO-1895-2009 - Toilet soap for children
SASO-1196-1998 - Shaving soap
SASO-2767-2009 - Glycerin Soap Transparent and Non-transparent
SASO-1873-2009 - Hand wash liquid soap
SASO-GSO-1786-2014 - Toilet soaps
SASO-GSO-1942-2010 - Transparent soap
Page (2) of (56)
Batch certification
according to SA72
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Toothpaste
SASO-802-1998 - Cosmetic products-toothpaste
Batch certification
according to SA72
Air Freshener
SASO-1326-1998 - Aerosol air freshener
Batch certification
according to SA71
Lubricants,
Industrial Oils and
Related Products
Chemicals for
Industrial and
Domestic Disinfection
Purposes
SASO-1842-2001 - Overhead lines - Characteristics of greases for aluminium,
aluminium alloy and steel bare conductors.
SASO-1728-2010 - Automatic Transmission Fluid
SASO-405-1995 - Brake fluids for road vehicles.
SASO-1782-2000 - C L Lubricating oils used in circulating lubrication systems
SASO-1732-2000 - C L P Lubricating oils used in circular and splash lubrication
systems
SASO-1527-1999 - Classification and Specifications of automotive greases
SASO-1380-1998 - Classification of Industrial Lubricants for Hydraulic System (H
L)
SASO-1182-1998 - Classification of Industrial Gear Lubricants (Family C).
SASO-1530-2003 - Gear lubricating oils
SASO-1524-1999 - H L P Hydraulic Oils
SASO-1525-1999 - H V L P Hydraulic Oils
SASO-1950-2001 - Heat treating oils (Quenching oils).
SASO-1775-2000 - Lubricants for Refrigerant Compressors
SASO-1729-2000 - Lubricating oils for air compressors and vacuum pumps
SASO-1869-2001 - Lubricating oils for two - stroke engines
SASO-1781-2010 - Mineral lubricating oils used in steam or gas turbines
SASO-2059-2002 - Water - Soluble Cutting Oil
SASO-GSO-1785-2013- Lubricating oils for internal combustion engines API
Classifications
IQS 1242:1988 - Quaternary Ammonium Compound disinfectants
SASO-1184-1998 - Phenolic disinfectant fluids
SASO-2618-2009 – Detergent, germicidal, general purpose, liquid
IQS 1502:1990 - Disinfectant detergent concentrate for general use
IQS 1653:1991 - Black and white disinfectant fluids
SASO-1385-1998 - Black and white liquid disinfectants
Page (3) of (56)
Batch certification
according to SA71
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Detergents
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
IQS 1276:1988 - Household Detergent Powders
IQS 1277:2002 - Porcelain Sanitary Cleaning Compound - Solid Type
IQS 1278:1988 - Household Scouring Powder
IQS 1553:1990 - Cleaning Compound, Rug and Upholstery
IQS 1554:1990 - Cleaning Compound Linoleum-Topped Furniture
IQS 1789:1993 - Pipeline Cleaning Compound-Alkili
IQS 2140:2000 - Calcium Hypochlorite and Chlorinated Lime
IQS 1723:2002 - Porcelain Cleaning Solution
TR Chem. 55 - Liquid Pipe Cleaner
KR-CH-0018:2012 - Liquid Glass Cleaner, Ammonia Free
TR Chem N°(60) - Non-Abrasive General Cleaner
IQS 1279:1988 - Household bleaching powder
SASO-2332-2005 - Stain Remover for Tableware
SASO-2616-2006 - Laundry powdered soaps
SASO-GSO-2439:2015 Detergent – Scouring powder
SASO-2067-2002 - Powdered Hand Cleaner
SASO-GSO-2013:2010-Washing Brighteners
IQS 1552: 1990- Glass-Cleaner-Liquid
IQS 1565: 1990 - Domestic Detergent Paste
IQS 1724: 1992 - Detergent, General Purpose (Spray on, Wipe off)
IQS 1868: 1994 - Heavy Duty Cleaning Compound, General Purpose
IQS 2296: 2012 - Oven Cleaner and Grease Remover
IQS 2304: 2012 - Fabric Softener
IQS 1266: 1996 - Sodium Hypochlorite Solution
IQS 1070: 1985 - Liquid Detergent for General Household Uses
KR-CH-0016: 2012 - General Cleaner for Surfaces – Liquid (e.g. floors, walls,
washing basins and bathtubs)
SASO-GSO-2077-2011 Coloured textiles detergent
SASO-1057-2009 - Alkali drain cleaner
SASO-828-1994 - Carpet cleaner liquid
SASO-GSO-2238-2012 - Liquid detergents for dishwashing
SASO-1195-1998 - Liquid glass cleaner
SASO-1054-2009 - Sodium hypochlorite solution
SASO-2065-2009 - Synthetic detergents for kitchen
SASO-510-2006 - Synthetic Detergents - Synthetic powered detergents for
household use
SASO-GSO-1897-2015- Clothes liquid softeners
SASO-2803-2010 - Synthetic liquid detergents for clothing and fabrics
Page (4) of (56)
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Products of the
Chemical Industry
SASO-2620:2006-Washing blue
Batch certification
according to SA71
Diapers and Sanitary
Material
SASO 1516:2007 - Single use disposable baby diapers
SASO 2865:2015 - Adult diapers for single use
SASO 997:2010 - Sanitary Pads for ladies
Batch certification
according to SA71
Facial Tissues (All
Kinds Including
Kitchen Towels, Wet
and Odorized Tissues
and Toilet Tissues)
SASO-484:1994 - Facial tissue - Paper
SASO-1375:1998 - Paper towels
SASO-1879:2001 - Requirements for rolls of hygienic paper
SASO-1191:1998 - Toilet paper
SASO-2871:2015 - Facial tissue – Paper, two-ply or more
SASO-2017:2010 - Wet wipes
Batch certification
according to SA71
Paper and Board
SASO-1962:2001 - Carbonless copy paper
SASO-GSO-1940:2010 - Copy paper for dry toner imaging processes
SASO-2083:2010- Technical requirements of files
SASO-GSO-1856:2008 - Marking of recycled paper and board
SASO-2826:2011 - Moulded packaging board
SASO-2827:2011 - Millboard, greyboard and strawboard
Batch certification
according to SA71
Packaging Materials
and Accessories
SASO-GSO-1830:2010 - Agricultural products sacks - Woven polypropylene sacks
SASO-936:1994 - Polyethylene bags for general purposes
SASO-1373:1998 - Milk paper board containers
SASO-424:1994 - Packages of explosives for civil purposes
SASO-722:1994 - Polyethylene films used for packaging non-food stuffs
SASO-825:1994 - Wrapping paper and paper bags
SASO-GSO-1854:2008 - Packaging - Cylindrical flexible laminated tubes Dimensions and tolerances
SASO-2829:2011 - Ribbed board containers - Requirements
SASO-GSO-1855:2008 - Packaging - Flexible cylindrical plastic tubes Dimensions and tolerances
SASO-1742:2000 - Polyethylene bags for food packaging application
SASO-1952:2009 - Sacks for the transport of food aid - Sacks made of woven jute
/ polyolefin fabric
SASO-1945:2001 - Refuse sacks made from polyethylene
Batch certification
according to SA71
Page (5) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Textiles
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
KR/TX/0126 Essential safety and healthy requirements of textiles and Appare
IQS 1146:1988 Cotton socks and stockings
IQS 1147:1988 Nylon socks
IQS 1148:1988 Woolen and woolen man made blended socks and Stockings
IQS 1877:1994 Acrylic socks
IQS 2138:2000 Blended yarn socks
IQS 1359:1989 Ladies pantyhose (tights)
IQS 1501:1999 Long and three – quarters stockings for women (under the knee)
KR/TX/0025:2012 Socks - Girls Pantyhose
TR TX N◦14: Girls pantyhose (tights)
SASO-1173:1998 Identification labels for textile products
SASO-1175:1998 - Black Okal
SASO-GSO-280:2005 Car upholstery –Fabric for car seats
SASO-153:1995 - Cotton sewing threads.
SASO-1329:1999 - Fabrics for civilian tents
SASO-402:2009 - National flag fabrics of the kingdom of Saudi Arabia
SASO-2389:2005 - Plastics coated fabrics for upholstery - specification for light
PVC-coated, woven, knitted, non-woven fabrics
SASO-1941:2001 - Plastics-coated fabrics for upholstery-part 1: PVC-coated
knitted fabrics
SASO-1942:2001 - Plastics-coated fabrics for upholstery-part 2: PVC coated
woven fabrics
SASO-ISO-7617-3-2008 Plastics-coated fabrics for upholstery -- Part 3:
Specification for polyurethane-coated woven fabrics
SASO-384:1996 - Polyester cotton fabrics (65/35)
SASO-2390:2005 - Polyester sewing threads
SASO-1617:1999 - Prayer rugs
SASO-645:1994 - Requirements for fire retardant tent fabrics.
SASO-784:1994 - Woven silk fabric
SASO-1934:2001 - Woven polyester fabric for thobes
SASO-1167:1998 - Woven carpets
SASO-1009:1998 - Woven blended fabrics - 55% polyester - 45% wool - plais
SASO-1171:1998 - Woven and knitted upholstery fabrics for domestic use
SASO-2137:2003 - Women's abaya and tarha fabrics
SASO-687:1994 - Tufted cut pile textile floor covering for domestic use
SASO-ISO-3758:2014 Textiles -- Care labeling code using symbols
Page (6) of (56)
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Textiles
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-1958:2009 – Textiles - Window cleaning cloths
SASO-GSO-1169:1998 - Cotton knitted fabrics for underwear
SASO-2256:2009 - Rubber- or plastics- coated fabrics for water resistant clothingpart1: PVC -coated fabrics
SASO-2257:2009 - Rubber or Plastic-Coated Fabrics for Water Resistant Clothing
Part 2: Polyurethane and Silicon Elastomer Coated Fabrics
SASO-2258:2009 - Rubber or Plastic-Coated Fabrics for Water Resistant ClothingPart 3: Natural Rubber and Synthetic Rubber Coated Fabrics
SASO-ASTM-D4360:2014 Standard Specification for Methyl n-Amyl Ketone
SASO-ASTM-D3994:2014 Standard Performance Specification for Woven
Swimwear Fabrics
SASO-ASTM-D3995: 2014 Standard Performance Specification for Men’s and
Women’s Knitted Career Apparel Fabrics: Dress and Vocational
SASO-ASTM-D3996: 2014 Standard Performance Specification for Knit
Swimwear Fabrics
SASO-ASTM-D4028:2014 Standard Specification for Solar Screening Woven
from Vinyl-Coated Fiber Glass Yarn
SASO-ASTM-D4035:2014 Standard Performance Specification for Knitted
Necktie and Scarf Fabrics
SASO-ASTM-D4111:2014 Standard Performance Specification for Woven
Napery and Tablecloth Fabrics: Household and Institutional
SASO-ASTM-D4769: 2014 Standard Specification for Woven and Warp Knitted
Comforter Fabrics
SASO-ASTM-D5432 :2014 Standard Performance Specification for Blanket
Products for Institutional and Household Use
SASO-ASTM-D5433 :2014 Standard Performance Specification for Towel
Products for Institutional and Household Use
SASO-ASTM-D7017: 2014 Standard Performance Specification for Rainwear and
All-Purpose, Water-Repellent Coat Fabrics
SASO-ASTM-D7268 :2014 Standard Performance Specification for Seamless Knit
Garments Including Intimates and Swimwear
SASO-GSO-1828 :2008 Technical Requirements for Woven Fabrics
SASO-2778:2009 substances harmful to human health and the environment used in
textille industry
SASO-ASTM-D3374:2014 Standard Specification for Vinyl-Coated Glass Yarns
SASO-ASTM-D3597:2014 Standard Performance Specification for Woven
Upholstery Fabrics—Plain, Tufted, or Flocked
Page (7) of (56)
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Standard / Normative document
Product
Certification
Scheme
SASO-ASTM-D3691:2014 Standard Performance Specification for Woven, Lace,
and Knit Household Curtain and Drapery Fabrics
SASO-ASTM-D4030: 2009 Standard Specification for Glass Fiber Cord and
Sewing Thread
SASO-ASTM-D4232: 2014 Standard Performance Specification for Men’s and
Women’s Dress and Vocational Career Apparel Fabrics
SASO-ASTM-D4720: 2014 Standard Performance Specification for Soft Window
Covering Fabrics for Household Use
SASO-ASTM-D4771:2014 Standard Performance Specification for Knitted
Upholstery Fabrics for Indoor
SASO-ASTM-D4847 :2008 Standard Performance Specification for Woven
Awning and Canopy Fabrics
SASO-ASTM-D5378 :2014 Standard Performance Specification for Woven and
Knitted Shower Curtains for Institutional and Household Use
SASO-ASTM-D6554:2014 Standard Specification for 100% Cotton Denim Fabrics
SASO-ASTM-D7021:2014 Standard Performance Specification for Bathrobe,
Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
SASO-ASTM-D3780 :2014 Standard Performance Specification for Men’s and
Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser
Fabrics
SASO-ASTM-D4118 :2016 Standard Performance Specification for Women's
Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics
SASO-ASTM-D4155 :2014 Standard Performance Specification for Women’s and
Girls’ Woven Sportswear, Shorts, Slacks, and Suiting Fabrics
SASO-ASTM-D4154 :2014 Standard Performance Specification for Men’s and
Boys’ Knitted and Woven Beachwear and Sports Shirt Fabrics
SASO-ASTM-D4116 :2014 Standard Performance Specification for Women’s and
Girls’ Knitted and Woven Corset-Girdle-Combination Fabrics
SASO-ASTM-D4465 :2016 Standard Performance Specification for Zippers for
Dungarees, Jeans and Work Trousers
SASO-ASTM-D4235 :2008 Standard Performance Specification for Women's and
Girls' Knitted Blouse and Dress Fabrics
SASO-ASTM-D7020 :2014 Standard Performance Specification for Woven
Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
SASO-ASTM-D4156 :2014 Standard Performance Specification for Women’s and
Girls’ Knitted Sportswear Fabrics
SASO-ASTM-D7019 :2014 Standard Performance Specification for Brassiere,
Slip, Lingerie and Underwear Fabrics
Batch certification
according to SA71
and IQ71
PRODUCT GROUP
Textiles
Page (8) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-ASTM-D4119 :2014 Standard Performance Specification for Men’s and
Boys’ Knitted Dress Shirt Fabrics
SASO-ASTM-D3562 :2014 Standard Performance Specification for Woven
Drycleanable Coat Fabrics
SASO-ASTM-D4112 :2008 Standard Performance Specification for Woven
Umbrella Fabrics
SASO-ASTM-D4115 :2014 Standard Performance Specification for Women’s and
Girls’ Knitted and Woven Dress Glove Fabrics
SASO-ASTM-D4153:2014 Standard Performance Specification for Men’s,
Women’s, and Children’s Woven Handkerchief Fabrics
SASO-ASTM-D4113:2014 Standard Performance Specification for Woven
Slipcover Fabrics
SASO-ASTM-D5431:2014 Standard Performance Specification for Woven and
Knitted Sheeting Products for Institutional and Household Use
SASO-GSO-2440:2015 General Requirements For Manufactured Leather
SASO-GSO-2442:2015 Leather - Tanned Leather with Chrome (Wet Blue) Used in
Different Leather Industry
Textiles
Under Wear
Bed Sheets and
Blankets
KR/TX/0126: 2012 Essential safety and healthy requirements of textiles and
Appare
IQS 1354:2014 Inter lock cotton vests
IQS 1360:1988 Plain - cotton vests
IQS 1361:1988 Plain (cotton - polyester) blended vests
IQS 1365: 1988 Rib Knitted cotton Vest
IQS 2278:2009 Knitted Long sleeve vests
IQS 1355:1988 Cotton short drawers for men
IQS 1356:1988 Cotton briefs for men
IQS 1370:1988 Brassier size
IQS 1523:1989 Women slips
KR/TX/0024: 2012 Textile Goods Underwear (Woven and Knitted)
SASO-1627:1999 - Bed sheets and pillow slips (50/50 cotton/polyester) for general
use
SASO-1000:2004 - Acrylic blankets
SASO-559:1989 - Woven woolen blankets
SASO-2835:2011 quilts with natural or synthetic fibers fillings
IQS 1227: 1988 Towels
SASO-1625:1999 - Cotton terry towels
IQS 1063:1985 - Bed Spreads Pillow Cases
IQS 1062:1991 Cotton and Cotton – Polyester Sheeting
Page (9) of (56)
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Bed Sheets and
Blankets
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
IQS 1051:1990 Woven wool and blended Blankets
IQS 1052:1990 Textiles Tufted Blankets Made From Acrylic Yarns
KR/TX/0126: 2012 Essential safety and healthy requirements of textiles and
Appare
SASO-403:2009 - Dimensions, geometrical details and usage of flags and banners
of the Kingdom of Saudi Arabia
SASO-1629:1999 - Fabrics for men's work wear
SASO-394:2003 - Head cloth for men - White ghautra
SASO-1007:1998 - Ihrem dress
SASO-GSO-1829:2008 Technical requirements for woven fabrics garments
SASO-2636:2006 - Men's socks - Cotton and nylon socks
SASO-2275:2004 - Head cloth for men - Woollen shemagh and woollen blended
shemagh
SASO-GSO-277: 2004 Head cover for men-cotton shemagh and blended cotton
shemagh(cotton/polyester)
SASO-GSO-277: 2015 Head cloth for men-cotton shemagh and polyester shemagh
or blended cotton and synthetic fibres shemagh
Garments
Footwear
SASO-885:1994 - Safety foot wear
SASO-ISO-20345:2014 Personal protective equipment -- Safety footwear
SASO-ISO-20347:2014 Personal protective equipment -- Occupational footwear
SASO-ISO-TR-20572:2009 Footwear -- Performance requirements for
components for footwear – Accessories
SASO-ISO-20346:2007 Personal protective equipment -- Protective footwear
SASO-ISO-2251:2007 Lined antistatic rubber footwear -- Specification
SASO-ISO-17249:2007 Safety footwear with resistance to chain saw cutting
SASO-ISO-4643:2007 Moulded plastics footwear -- Lined or unlined poly(vinyl
chloride) boots for general industrial use – Specification
Protective Clothing
SASO-ISO-11611:2016 Protective clothing for use in welding and allied processes
SASO-ISO-11612:2016 Protective clothing -- Clothing to protect against heat and
flame -- Minimum performance requirements
SASO-ISO-13688:2006 Protective clothing -- General requirements
SASO-ISO-13998:2006 Protective clothing -- Aprons, trousers and vests protecting
against cuts and stabs by hand knives
SASO-ISO-14877:2006 Protective clothing for abrasive blasting operations using
granular abrasives
Page (10) of (56)
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
Batch certification
according to SA71
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Textile Floor
Coverings and
Others
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-ISO-11860:2007 Textile floor coverings -- Jute carpet backing fabric –
Specification
SASO-ISO-11861 :2007 Textile floor coverings -- Coir mats -- Types and
specification
SASO-1631:1999 out - Door tufted cut- pile textile floor covering "Artificial
grass".
SASO-ISO-1181:2007 Fibre ropes -- Manila and sisal -- 3-, 4- and 8-strand ropes
SASO-ISO-5912:2007 Camping tents
SASO-ISO-1107: 2007 Fishing nets -- Netting -- Basic terms and definitions
SASO-1939:2001 Spring interior mattresses for domestic bedding for adult use.
SASO-217:1998 Absorbent cotton ribbon gauze
Batch certification
according to SA71
Food and Agricultural Products
Fertilizer
Pesticides
KR/CH/0129: 2012 – Fertilizers
EC Directive 2003:2003 – Fertilizers – All Types
KR/CH/0135: 2012 / JS:2010:2012 – Fertilizers and soil Conditioners – Humic
substances as soil conditioners – Requirements and test methods
JS 1482:2012 - Fertilizers and Soil Conditioners – Peat
IQS 1551:1990 - Triple Super Phosphate Fertilizer
IQS 1253:1988 - Organic Fertilizers , Potting Soil
IQS 1252:1988 - Organic Fertilizers
FAO Specification: 2009 - Organic Manures
SASO 497:2010 - GSO 2058/2010 - Urea fertilizer
SASO 1055:2011 - GSO 803/2011 - Compound fertilizers
SASO 1726:2000 - GSO 1178/2002- Ammonium nitrate fertilizer
SASO 1798:2000 - GSO 1227/2002 - Peat moss for agricultural purposes
SASO 1963:2001 - Granular potassium sulphate fertilizer
SASO 646:1994 - GSO 339/1994 - Single superphosphate fertilizer
SASO ISO 7409:2007 - Fertilizers -- marking -- presentation and declarations
SASO ISO 7851:2007 - Fertilizers and soil conditioners -- classification
SASO 853:1994 - GSO 486/1994 - Fertilizers ammonium sulphate.
SASO 922:1994 - GSO 555/1994 - Organic fertilizers
SASO 937:1998 - GSO 693/1997 - Granular monoammonium phosphate fertilizer
SASO 938:1998 - GSO 694/1997 - Granular diammonium phosphate fertilizer.
SASO 991:1998 - GSO 745/1997 - Triple superphosphate fertilizer (tsp)
KR/CH/0128:2012 - Manual of FAO and WHO specifications for pesticides and
guidelines on good labeling practices of pesticides – Agricultural Pesticides
IQS 1213:1988 - Insecticides Sulfur And Sulfur Formulations
IQS 1221:1988 - Insecticides - Azinphos - Ethyl And Its Formulation
IQS 1259:1988 - Herbicides Paraquat
IQS 1452:1989 - Pesticide – DNOC
IQS 1642:1991 - Ae1rosols For Insecticides (General Requirements)
Page (11) of (56)
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Pesticides
IQS 1251:1988 - Fungicides-Captan
SASO-392-2004 - Regulations For pesticides
Energy Drinks (All
Types)
IQS 2307 - Non-alcoholic drinks - energy drink
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
and IQ71
Construction Products
Rubber and Plastic
Products
Wood and Timber
IEC 61386-1:2008 - Conduit systems for cable management - Part 1: General
requirements
IEC 61386-23:2002 - Conduit systems for cable management -- Part 23: Particular
requirements - Flexible conduit systems
IEC 61386-24:2004 - Conduit systems for cable management -- Part 24: Particular
requirements - Conduit systems buried underground
IQS 1618-1:1991 - Specification for conduits for electrical installations / general
requirements
IQS 1618-2:1991 - Specification for conduits for electrical
installations /
particular specification for plain conduits of insulating materials
IQS 1668:1990 - Flexible corrugated conduits made of plastic for electrical
Installations
SASO-1862:2001 - Polycarbonate extruded sheets
SASO-2171:2003 - Plastics-amino plastic moulding materials
SASO-2624:2006 (GSO 1890:2009) - Plastic warning devices for underground
cables and pipelines with visual characteristics
SASO-1928:2001 - General purpose injection moulded flat plastic pallets
SASO-GSO-1938:2010 - Rubber gloves for general purpose and household and
beautician
SASO-166:1991 (GSO 141:1991) - Rubber hoses for household appliance using
liquefied petroleum gases
SASO-2267:2004 - Plastic hoses and hose assemblies thermoplastic textile reinforced, hydraulic type – Specification.
SASO-862:1994 (GSO 495/1994) - Polybutylene (pb) plastic tubing for water
SASO-1720:2000 (GSO 1172/2002) - Polyvinyl chloride resin for industrial
purposes
SASO-2622:2009 (GSO 1938/2009) - Rubber general purpose, household or
beautician
SASO-2051:2002 - Unplasticized polyvinyl chloride (u-PVC) extruded sheet
SASO-815-1994 (GSO 448/1994) – Wooden doors
SASO-1255-1998 (GSO 942/1997) – Wooden windows
SASO-1256-1998 (GSO 943/1997) – Specification for Timber
SASO-1413-1998 (GSO 1423/2002) – Wood chipboard for general use
SASO-1756-2000 – Wooden doors
SASO-1757-2000 (GSO 1442/2002) – Medium density fiberboard (MDF)
Page (12) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to
SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Wood and Timber
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-1758-2000 (GSO 1443/2002) – Blackboard and laminboard
SASO-ISO-1098-2006 – Veneer plywood for general use -- General requirements
SASO-ISO-2219-2014 – Thermal insulation products for buildings -- Factory-made
products of expanded cork (ICB) – Specification
SASO-ISO-3813-2008 – Resilient floor coverings -- Cork floor tiles – Specification
SASO-ISO-3869-2008 – Composition cork -- Expansion joint fillers –
Specifications, packaging and marking
SASO-ISO-4711-2008 – Agglomerated cork discs – Specifications
SASO-ISO-4714-2008– Composition cork – Specifications, sampling, packaging
and marking
SASO-ISO-8335-2007 – Cement-bonded particleboards – Boards of Portland or
equivalent cement reinforced with fibrous wood particles
SASO-ISO-8724-2014– Cork decorative panels – Specifications
SASO-ISO-8970-2014– Timber structures – Testing of joints made with
mechanical fasteners – Requirements for wood density
SASO-ISO-10033-2-2012 – Laminated Veneer Lumber (LVL) -- Bonding quality - Part 2: Requirements
SASO-ISO-12466-2-2014 – Plywood – Bonding quality – Part 2: Requirements
SASO-ISO-12465-2012 – Plywood – Specifications
SASO-ISO-16893-2-2012 – Wood-based panels – Particleboard -- Part 2:
Requirements
SASO-ISO-16894-2012 – Wood-based panels – Oriented strand board (OSB) -Definitions, classification and specifications
SASO-ISO-16895-2-2012 – Wood-based panels – Dry-process fibreboard -- Part 2:
Requirements
SASO-ISO-18776-2015 Laminated veneer lumber (LVL) – Specifications
SASO-ISO-20152-1-2012 – Timber structures -- Bond performance of adhesives -Part 1: Basic requirements
SASO-ISO-20152-2-2012 – Timber structures – Bond performance of adhesives -Part 2: Additional requirements
SASO-ISO-22157-1-2007 – Bamboo -- Determination of physical and mechanical
properties -- Part 1: Requirements
SASO-ISO-27769-2-2012 – Wood-based panels – Wet-process fibreboard -- Part 2:
Requirements
SASO-NFPA-703-2010 – Standard for Fire-Retardant Treated Wood and FireRetardant Coatings for Building Materials
ISO 1096: 2014 – Plywood – Classification
ISO 2219: 2010 Thermal insulation products for buildings -- Factory-made
products of expanded cork (ICB) – Specification
ISO 2426-1:2000 – Plywood – Classification by surface appearance – Part 1:
General
ISO 2426-2:2000 – Plywood – Classification by surface appearance – Part 2:
Hardwood
Page (13) of (56)
Batch
Certification
according to
SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Wood and Timber
Glass and Ceramic
Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ISO 2426-3:2000 – Plywood – Classification by surface appearance – Part 3:
Softwood
ISO 3813:2004 – Resilient floor coverings -- Cork floor tiles – Specification
ISO 3869:2001 – Composition cork – Expansion joint fillers – Specifications,
packaging and marking
ISO 4714:2000 – Composition cork -- Specifications, sampling, packaging and
marking
ISO 5328:1978 – Solid wood paving blocks -- Softwood paving blocks -- Quality
requirements
ISO 8724:2009 – Cork decorative panels – Specification
ISO 9149:2010 – Cork wall coverings in rolls – Specifications
ISO 10033-2:2011 – Laminated Veneer Lumber (LVL) -- Bonding quality -- Part 2:
Requirement
ISO 12122-1:2014 – Timber structures -- Determination of characteristic values -Part 1: Basic requirements
ISO 12465:2007 – Plywood – Specifications
ISO 12466-2: 2007 – Plywood – Bonding quality – Part 2: Requirements
ISO 13608: 2014 – Plywood – Decorative veneered plywood
ISO 16893-2016 – Wood-based panels – Particleboard
ISO 16895:2016– Wood-based panels -- Dry-process fibreboard
ISO 18776: 2008+Amd 1:2013 – Laminated veneer lumber (LVL) – Specification
ISO 27769-2: 2009 – Wood-based panels – Wet process fireboard – Part 2:
Requirements
ISO 3813:2004 – Resilient floor coverings – Cork floor tiles – Specification
SASO-1025:1998 (GSO 1012/1998) - Ceramic sanitary appliances - General
requirements
SASO-ISO-13006:2016 - Ceramic tiles-Definitions, classification, characteristics
and marking
SASO-1257:2007 (GSO 944/2007) - Sanitary appliances - Flushing water tanks
SASO-1258:1998 (GSO 945/1997) - Ceramic sanitary appliances - Eastern water
closets and traps
SASO-1259:1998 (GSO 946/1997) - Ceramic sanitary appliances: Eastern water
closets and traps
SASO-1473:2016 - Ceramic Sanitary Appliances - Western Water Closets
SASO-1915:2001 - Glass in building-basic soda lime silicate glass products Definitions and general physical and mechanical properties
SASO-1916:2001 - Glass in building-basic soda lime silicate glass products: float
glass
SASO-1917:2001 - Glass in building-basic soda lime silicate glass products:
patterned glass
SASO-1918:2001 - Glass in building-basic soda lime silicate glass products: wired
patterned glass
SASO-GSO-EN-14528:2011 – Ceramic sanitary appliances – Bidets
Page (14) of (56)
Batch
Certification
according to
SA71
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Glass and Ceramic
Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-GSO-EN-14688:2011 - Ceramic Sanitary Appliances - Wash Basins
SASO-ISO-3052:2007 - Glass in building -- Glass blocks -- Specification and test
methods
SASO-ISO-9051:2005 - Glass in building -- Fire-resistant glazed assemblies
containing transparent or translucent glass, for use in building
SASO-ISO-12543-2:2014 - Glass in building -- Laminated glass and laminated
safety glass -- Part 2: Laminated safety glass
SASO-ISO-12543-3:2014 - Glass in building -- Laminated glass and laminated
safety glass -- Part 3: Laminated glass
SASO-ISO-13007-1:2014 - Ceramic tiles -- Grouts and adhesives -- Part 1: Terms,
definitions and specifications for adhesives
SASO-ISO-13007-3:2014 - Ceramic tiles -- Grouts and adhesives -- Part 3: Terms,
definitions and specifications for grouts
SASO-ISO-16293-1:2011- Glass in building -- Basic soda lime silicate glass
products -- Part 1: Definitions and general physical and mechanical properties
SASO-ISO-20492-3:2011 - Glass in buildings -- Insulating glass -- Part 3: Gas
concentration and gas leakage
SASO-ISO-21690:2007 - Glass in building -- Glass blocks -- Specification and test
methods
SASO-ISO-25537:2011 - Glass in building -- Silvered, flat-glass mirror
SASO-ASTM-C126:2015 - Standard Specification for Ceramic Glazed Structural
Clay Facing Tile, Facing Brick, and Solid Masonry Units
SASO-ASTM-C530:2014- Standard Specification for Structural Clay Nonload
bearing Screen Tile
SASO-ASTM-C1086:2010- Standard Specification for Glass Fiber Mechanically
Bonded Felt Thermal Insulation
SASO-ASTM-C1177:2014- Standard Specification for Glass Mat Gypsum
Substrate for Use as Sheathing
SASO-ASTM-C1422:2012 - Standard Specification for Chemically Strengthened
Flat Glass
SASO-ASTM-D579:2014 – Standard Specification for Greige Woven Glass
Fabrics
SASO-ASTM-D3841-2012 - Standard Specification for Glass-Fiber-Reinforced
Polyester Plastic Panels
SASO-GSO-ASTM-D4029:2015- Standard Specification for Finished Woven
Glass Fabrics
SASO-ASTM-D6298:2014- Standard Specification for Fiberglass Reinforced
Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory
Applied Metal Surface
SASO-GSO-ASTM-E2190:2015 - Standard Specification for Insulating Glass Unit
Performance and Evaluation
SASO-ASTM-E2358:2010 - Standard Specification for the Performance of Glass in
Permanent Glass Railing Systems, Guards, and Balustrades
Page (15) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Glass and Ceramic
Products
Construction/
Building Materials
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-EN-1036-1:2012 - Glass in building - Mirrors from silver-coated float glass
for internal use - Part 1: Definitions, requirements and test methods
SASO-EN-1051-2:2012 - Glass in building - Glass blocks and glass pavers - Part 2:
Evaluation of conformity/Product standard
SASO-EN-1096-2:2012 - Glass in building - Coated glass - Part 2: Requirements
and test methods for class A, B and S coatings
SASO-EN-1096-3:2012 - Glass in building - Coated glass - Part 3: Requirements
and test methods for class C and D coatings
SASO-EN-14178-1:2012 - Glass in building - Basic alkaline earth silicate glass
products - Part 1: Float glass
ISO 9051:2001 - Glass in building -- Fire-resistant glazed assemblies containing
transparent or translucent glass, for use in building
ISO 11485-2:2011 - Glass in building -- Curved glass -- Part 2: Quality
requirements
ISO 11485-3:2014 - Glass in building -- Curved glass -- Part 3: Requirements for
curved tempered and curved laminated safety glass
ISO 12543-2:2011 - Glass in building -- Laminated glass and laminated safety glass
-- Part 2: Laminated safety glass
ISO 12543-3:2011 - Glass in building -- Laminated glass and laminated safety glass
-- Part 3: Laminated glass
ISO 13006:2012 - Ceramic tiles -- Definitions, classification, characteristics and
marking
ISO 13007-1:2014 - Ceramic tiles -- Grouts and adhesives -- Part 1: Terms,
definitions and specifications for adhesives
ISO 13007-3:2010 - Ceramic tiles -- Grouts and adhesives -- Part 3: Terms,
definitions and specifications for grouts
ISO 16293-1:2008 - Glass in building -- Basic soda lime silicate glass products -Part 1: Definitions and general physical and mechanical properties
ISO 21690:2006 - Glass in building -- Glass blocks -- Specification and test
methods
ISO 25537:2008 - Glass in building -- Silvered, flat-glass mirror
SASO-1335-1998 (GSO 977/1997) - Regulations of thermal insulation in building
SASO-GSO-BS-4841-1: 2014 - Rigid polyisocyanurate (PIR) and polyurethane
(PUR) products for building end-use applications - Part 1 : Specification for
laminated insulation boards with auto-adhesively or separately bonded facings
SASO-GSO-BS-4841-2: 2014 - Rigid polyisocyanurate (PIR) and polyurethane
(PUR) products for building end-use applications - Part 2 : Specification for
laminated boards with auto-adhesively bonded facings for use as thermal insulation
for internal wall linings and ceilings
SASO-GSO-BS-4841-3: 2014 - Rigid polyisocyanurate (PIR) and polyurethane
(PUR) products for building end-use applications - Part 3 : Specification for
laminated boards (roofboards) with auto-adhesively or separately bonded facings
for use as roofboard thermal insulation under built
Page (16) of (56)
Batch certification
according to SA71
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Construction /
Building Materials
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-GSO-BS-4841-4:2014 - Rigid polyurethane (PUR) and polyisocyanurate
(PIR) products for building end-use applications - Part 4 : Specification for
laminated insulation boards (roofboards) with auto-adhesively or separately
bonded facings for use as roofboard thermal insulation
SASO-GSO-BS-4841-5: 2014 - Rigid polyisocyanurate (PIR) and polyurethane
(PUR) products for building end-use applications- part 5: Specification for
laminated boards (roofboards) with auto-adhesively or separately bonded facings
for use as thermal insulation boards
SASO-GSO-BS-4841-6:2014 - Rigid polyisocyanurate (PIR) and polyurethane
(PUR) products for building end-use applications - Part 6 : Specification for
laminated boards with auto-adhesively or separately bonded facings for use as
thermal insulation for floors
SASO-1477-1999 (GSO 1431/1999) - Sanitary appliances - Pressurized flushing
devices
SASO-1480-1999 (GSO 1434/2002) - Sanitary appliances - Flushing apparatus
SASO-GSO 981/2015- High calcium quicklime and hydrated lime
SASO-ASTM-C578:2014 - Standard Specification for Rigid, Cellular Polystyrene
Thermal Insulation
SASO-1810-2001 (GSO 1445/2002) - Natural granite
SASO-1812-2001 (GSO 1447/2001) - Pitched roofs clay tiles and fittings
SASO-1913-2001 - Sanitary appliances - Tapware - Shower and spray hoses
SASO-1931-2001 - Asphalt used in damp-proofing and waterproofing
SASO-1949-2001 - Emulsified asphalt
SASO-2052-2002 - Rigid polyvinyl chloride(pvc) extruded hollow profiles for
windows and doors
SASO-2056-2002 - Cationic emulsified asphalt
SASO-2057-2002 - Asphalt primer used in roofing ,damp-proofing and
waterproofing
SASO-2076-2002 - Asphalt Roof Coating - Asbestos-free
SASO-2217-2004 - Gypsum blocks
SASO-2264-2004 - Asphalts used in roofing
SASO-2265-2004 - Cutback asphalt
SASO-2381-2005 - Emulsified asphalt used as a protective coating for roofing
SASO-2632-2006 - Aluminum-pigmented Asphalt Roof Coatings, Non-fibered,
and Fibered without Asbestos
SASO-2655-2008 - Sanitary appliances - General requirements for plumbing
fixture fittings
SASO-GSO-2012-2010 - Baths for domestic purposes made of acrylic material
SASO-ISO-7345-2010 - Thermal insulation -- Physical quantities and definitions
SASO-EN-13659-2010 - Shutters. Performance requirements including safety
SASO-ASTM-C503-2016 – Standard Specification for Marble Dimension Stone
SASO-ASTM-D449:2014 – Standard Specification for Asphalt Used in
Page (17) of (56)
Batch certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Construction /
Building Materials
Cables and Cords
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Dampproofing and Waterproofing
SASO-ASTM-D1227-2014 – Standard Specification for Emulsified Asphalt Used
as a Protective Coating for Roofing
SASO-ASTM-D2824-2014 – Standard Specification for Aluminum-Pigmented
Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
SASO-ASTM-D3747-2008 – Standard Specification for Emulsified Asphalt
Adhesive for Adhering Roof Insulation
SASO-ASTM-D3805-2014– Standard Guide for Application of AluminumPigmented Asphalt Roof Coatings
SASO-ASTM-D4479-2014 – Standard Specification for Asphalt Roof Coatings
Asbestos-Free
ASTM C1396/C1396M:2014a – Standard specification for gypsum boards
ISO 6935-1:2007 – Steel for the reinforcement of concrete -- Part 1: Plain bars
ISO 6935-2:2015 – Steel for the reinforcement of concrete -- Part 2: Ribbed bars
ISO 6935-3:1992+Cor1:2000: Steel for the reinforcement of concrete -- Part 3:
Welded fabric
ISO 10544:1992 Cold-reduced steel wire for the reinforcement of concrete and the
manufacture of welded fabric
ISO 14657:2005 Zinc-coated steel for the reinforcement of concrete
IQS 2091: 1999 Carbon steel bars for the reinforcement of concrete
KR/EN/0106: Carbon steel bars for the reinforcement of concrete (plain and
deformed)
SASO-ASTM-A615:2015 Standard Specification for Deformed and Plain CarbonSteel Bars for Concrete Reinforcement
SASO-1901-2001 - Metal conduits and fittings for electrical installations
SASO-786-1994 - Commercial Annealed Aluminum Electrical Conductor Wire
SASO-1985-2001 - Electrical installations of buildings - Part 5: Selection and
erection of electrical equipment - Chapter 52: Wiring systems
SASO-1346-1998 - Low - Frequency Cables And Wires With PVC Insulation And
PVC Sheath - Part 2 : Telephone Wire For Inside Application
SASO-1839-2001 - Low frequency cables and wires with PVC insulation and PVC
sheath Part 3: Equipment wires with solid or stranded
SASO-1594-1999 - Low frequency cables with polyolefin insulation and moisture
barrier polyolefin sheath - Part1:General design details
SASO-55-1984 - PVC - insulated cables with circular copper conductors
SASO-2435-2005 - Power cables with extruded insulation and their accessories for
rated voltages above 150 KV (um=170 KV) up to 500 KV (um=550 KV)-test
methods and requirements
SASO-IEC-61196-8-2-2012 - Coaxial communication cables - Part 8-2: Detail
specification for 50-047 type semi-flexible cables with solid
Page (18) of (56)
Batch certification
according to SA71
and IQ71
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Cables and Cords
polytetrafluoroethylene (PTFE) insulation
SASO-2036-2002 - Rubber insulated cables - rated voltages up to and
including450/750 V
Low-Voltage
Switchgear and
Control Gear
Assemblies
SASO-1349-1998 - Circuit-breakers for overcurrent protection for household and
similar installations.
SASO-2003-2002 - A.C. metal-enclosed switchgear and control gear for rated
voltages above 1 KV and up to and including 52 KV
Batch certification
according to SA71
SASO-IEC-60335-2-2- 2014 - Household and Similar Electrical appliances –
Safety - Part 2-2: Particular Requirements for Vacuum Cleaners and Water Suction
Cleaning Appliances
SASO-GSO-IEC 60335-2-3-2015 - Household and similar electrical appliances Safety - Part 2-3: Particular requirements for electric irons
SASO-IEC-60335-2-4-2010- Household and similar electrical appliances - Safety Part 2-4: Particular requirements for spin extractors
SASO-IEC-60335-2-5-2014 - Household and similar electrical appliances - Safety Part 2-5: Particular requirements for dishwashers
SASO-IEC-60335-2-6-2009 - Household and similar electrical appliances - Safety Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and
similar appliances
SASO-GSO-IEC-60335-2-7-2016 - Household and similar electrical appliances Safety - Part 2-7: Particular requirements for washing machines
SASO-2692-2013 - Energy Labelling Requirement of Clothes Washing Machines
for Household Use
SASO-141-1979 - Household Electric clothes washing machine.
SASO-IEC-60335-2-8-2014 – Safety of Household and Similar Electrical
Appliances - Part 2: Particular Requirements Section 8: Shavers Hair Clippers and
Similar Appliances.
SASO-1604-2009 - Safety of Household and Similar Electrical Appliances - Part 2:
Particular Requirements Section 8: Shavers Hair Clippers and Similar Appliances
SASO-GSO-IEC-60335-2-11-2012 - Household and similar electrical appliances Safety Part 2-11: Particular requirement for tumble dryers.
SASO-1977-2001- Safety of household and similar electrical appliances - Part 2:
Particular requirements-Section 11: Tumble dryers.
SASO-GSO-IEC 60335-2-12:2012-Household and similar electrical appliances –
Safety-Part 2-12: Particular requirements for warming plates and similar appliances
SASO-IEC 60335-2-13:2010-Household and similar electrical appliances-Safety
Part 2-13:Particular requirements for deep fat fryers, frying pans and similar
appliances
Batch certification
according to SA71
Household and
Similar Electrical
Appliances
Page (19) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Household and
Similar Electrical
Appliances
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-IEC-60335-2-15-2014- Household and Similar Electrical appliances - Safety
- Part 2-15: Particular Requirements for Appliances for Heating Liquids
SASO-GSO-IEC-60335-2-16-2012 - Household and similar electrical appliances Safety - Part 2-16: Particular requirements for food waste disposers
SASO-2026-2002 - Safety of household and similar electrical appliances - Part 2:
Particular requirements - Section16: Food waste disposers.
SASO-IEC-60335-2-17-2009 - Household and similar electrical appliances - Safety
- Part 2-17: Particular requirements for blankets, pads and similar flexible heating
appliances
SASO-1698-2000 - Safety of household and similar electrical appliances – Part 2:
Particular requirements -Section 21: Storage water heaters.
SASO-GSO-IEC 60335-2-23-2012 Household and similar electrical appliances Safety -- Part 2-23: Particular requirements for appliances for skin or hair care
SASO-IEC 60335-2-24-2014 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream
appliances and ice makers
SASO-2664-2013 - Energy Performance, Capacity and Labelling of Household
Refrigerators, Refrigerator-Freezers and Freezers
SASO-IEC 60335-2-25-2012 Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination
microwave ovens
SASO-GSO-IEC 60335-2-26-2012 - Household and similar electrical appliances Safety - Part 2-26: Particular requirements for clocks
SASO-IEC-60335-2-27-2014 - Household and similar electrical appliances - Safety
- Part 2-27 : Particular requirements for appliances for skin exposure to ultraviolet
and infrared radiation
SASO-IEC 60335-2-28-2012 Household and similar electrical appliances - Safety
-- Part 2-28: Particular requirements for sewing machines
SASO-GSO-IEC 60335-2-29-2012 - Household and similar electrical appliances Safety Part 2-29 : Particular requirements for battery chargers
SASO-GSO-IEC-60335-2-30-2012- Household and similar electrical appliancesSafety-Part 2-30: Particular requirements for room heaters
SASO-60335-2-31-2012 - Household and similar electrical appliances - Safety Part 2-31: Particular requirements for range hoods
SASO-GSO-IEC 60335-2-32-2012 Household and similar electrical appliances Safety -- Part 2-32: Particular requirements for massage appliances
SASO-IEC-60335-2-34-2014 - Household and similar electrical appliances - Safety
- Part 2-34: Particular requirements for motor-compressors
Page (20) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Standard / Normative document
Product
Certification
Scheme
SASO-IEC-60335-2-35-2014- Household and Similar Electrical appliancesSafety- Part 2-35: Particular Requirements for Instantaneous Water Heaters
SASO-IEC-60335-2-36-2014 - Household and similar electrical appliances - Safety
- Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens,
hobs and hob elements
SASO-GSO-IEC-60335-2-37-2012 - Household and similar electrical appliances Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
SASO-IEC-60335-2-38-2007- Household and similar electrical appliances - Safety
- Part 2-38 : Particular requirements for commercial electric griddles and griddle
grills
SASO-IEC-60335-2-39-2014- Household and similar electrical appliances - Safety
- Part 2-39 : Particular requirements for commercial electric multi-purpose cooking
pans
SASO-2007-2002- Safety of household and similar electrical appliances
SASO-IEC-60335-2-40-2006- Household and similar electrical appliances - Safety
- Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and
dehumidifiers
SASO-2663-2014 - Energy Labeling and Minimum Energy Performance
Requirements for Air-Conditioners
SASO-GSO-IEC-60335-2-41-2012 - Household and similar electrical appliances Safety - Part 2-41: Particular requirements for pumps
SASO-1972-2001 - Vertical turbine water pumps - general requirements For
Column pipe Assembly
SASO-1305-1997 - Water centrifugal pumps - general requirements
SASO-GSO-IEC-60335-2-42-2012 - Household and similar electrical appliances Safety - Part 2-42: Particular requirements for commercial electric forced
convection ovens, steam cookers and steam-convection ovens
SASO-IEC-60335-2-43- 2014- Household and similar electrical appliances - Safety
- Part 2-43 : Particular requirements for clothes dryers and towel rails
SASO-IEC-60335-2-44-2014- Household and similar electrical appliances - Safety
- Part 2-44: Particular requirements for ironers
SASO-IEC-60335-2-47- 2007- Household and similar electrical appliances - Safety
- Part 2-47 : Particular requirements for commercial electric boiling pans
SASO-IEC-60335-2-48- 2007 - Household and similar electrical appliances Safety - Part 2-48 : Particular requirements for commercial electric grillers and
toasters
SASO-IEC-60335-2-49-2007 - Household and similar electrical appliances - Safety
- Part 2-49 : Particular requirements for commercial electric hot cupboards
Batch certification
according to SA71
PRODUCT GROUP
Household and
Similar Electrical
Appliances
Page (21) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Household and
Similar Electrical
Appliances
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-IEC-60335-2-50-2007 - Household and similar electrical appliances - Safety
- Part 2-50 : Particular requirements for commercial electric bains-marie
SASO-IEC-60335-2-51-2007 - Household and similar electrical appliances - Safety
- Part 2-51 : Particular requirements for stationary circulation pumps for heating
and service water
SASO-IEC-60335-2-52-2007 - Household and similar electrical appliances - Safety
- Part 2- 52: Particular requirements for Oral hygiene appliances
SASO-IEC-60335-2-55-2007 - Household and similar electrical appliances - Safety
- Part 2- 55: Particular requirements for Electrical appliances for use with
aquariums and garden ponds
SASO-IEC-60335-2-58-2007 - Household and similar electrical appliances - Safety
- Part 2-58 : Particular requirements for commercial electric dishwashing machines
SASO-IEC 60335-2-59-2012-Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
SASO-IEC-60335-2-60-2010- Household and similar electrical appliances - Safety
- Part 2- 60: Particular requirements for Whirlpool baths
SASO-IEC-60335-2-61-2014- Household and similar electrical appliances - Safety
-- Part 2-61: Particular requirements for thermal-storage room heaters
SASO-IEC-60335-2-62-2007- Household and similar electrical appliances - Safety
- Part 2-62: Particular requirements for commercial electric rinsing sinks
SASO-IEC-60335-2-64-2014- Household and similar electrical appliances - Safety
- Part 2-64 : Particular requirements for commercial electric kitchen machines
SASO-GSO-IEC-60335-2-65-2012- Household and similar electrical appliances Safety -- Part 2-65: Particular requirements for air-cleaning appliances
SASO-IEC-60335-2-66-2007- Household and similar electrical appliances - Safety
-- Part 2-66: Particular requirements for water-bed heaters
SASO-IEC-60335-2-67-2009 - Household and similar electrical appliances - Safety
- Part 2-67: Particular requirements for floor treatment machines, for commercial
use
SASO-IEC-60335-2-68-2009 - Household and similar electrical appliances –
Safety - Part 2-68:Particular requirements for spray extraction appliances
SASO-IEC-60335-2-69-2014 - Household and similar electrical appliances - Safety
- Part 2-69: Particular requirements for wet and dry vacuum cleaners, including
power brush, for industrial and commercial use
SASO-IEC-60335-2-70-2007- Household and similar electrical appliances - Safety
- Part 2- 70: Particular requirements for milking machines
SASO-GSO-IEC-60335-2-71-2015- Household and similar electrical appliances Safety -- Part 2-71: Particular requirements for electrical heating appliances for
Page (22) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Household and
Similar Electrical
Appliances
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
breeding and rearing animals
SASO-IEC-60335-2-72-2009 - Household and similar electrical appliances - Safety
- Part 2-72 : Particular requirements for automatic machines for floor treatment for
commercial and industrial use
SASO-IEC-60335-2-73-2014- Household and similar electrical appliances - Safety
- Part 2- 73: Particular requirements for Fixed immersion heaters
SASO-IEC-60335-2-74-2007- Household and similar electrical appliances - safety
- Part 2- 74: Particular requirements for Portable immersion heaters
SASO-IEC-60335-2-77-2009- Household and similar electrical appliances - Safety
- Part 2-77 : Particular requirements for pedestrian controlled mains-operated
lawnmowers
SASO-IEC-60335-2-78-2007- Household and similar electrical appliances - Safety
- Part 2-78 : Particular requirements for outdoor barbecues
SASO-IEC-60335-2-79-2014- Household and similar electrical appliances - Safety
- Part 2- 79: Particular requirements for high pressure cleaners and steam cleaners
SASO-IEC-60335-2-80-2010- Household and similar electrical appliances - Safety
- Part 2-80: Particular requirements for fans
SASO-112-1979 - Domestic electric fans
SASO-IEC-60335-2-81-2009- Household and similar electrical appliances - Safety
- Part 2-81 : Particular requirements for foot warmers and heating mats
SASO-IEC-60335-2-82-2007- Household and similar electrical appliances - Safety
- Part 2-82 : Particular requirements for amusement machines and personal service
machines
SASO-IEC-60335-2-83-2007- Household and similar electrical appliances - Safety
- Part 2-83 : Particular requirements for heated gullies for roof drainage
SASO-IEC-60335-2-84-2014- Household and similar electrical appliances - Safety
- Part 2-84 : Particular requirements for toilets
SASO-IEC-60335-2-85-2007- Household and similar electrical appliances - safety
- Part 2- 85: Particular requirements for Fabric steamers
SASO-IEC-60335-2-86-2010- Household and similar electric appliances - Safety Part 2-86: Particular requirements for electric fishing machines
SASO-GSO-IEC 60335-2-88-2012- Safety of household and similar electrical
appliances – Part 2-88: Particular requirements for humidifiers intended for use
with heating, ventilation, or air-conditioning systems.
SASO-IEC-60335-2-89-2009 - Household and similar electrical appliances - Safety
- Part 2-89 : Particular requirements for commercial refrigerating appliances with
an incorporated or remote refrigerant condensing unit or compressor
SASO-1303-1997 - Commercial refrigerated cabinets for the sale and /or display of
Page (23) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Household and
Similar Electrical
Appliances
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
food products-part1: General requirements.
SASO-1707-2000 - Commercial refrigerated cabinets for the sales and /or display
of food products - technical specification -Part 2-: Particular requirements.
SASO-IEC 60335-2-90-2012-Safety of household and similar electrical
appliances-part 2:Particular requirements -section 90:commercial microwave ovens
SASO-IEC-60335-2-91-2014- Household and similar electrical appliances - Safety
- Part 2-91 : Particular requirements for walk-behind and hand-held lawn trimmers
and lawn edge trimmers
SASO-IEC-60335-2-92-2009- Household and similar electrical appliances - Safety
- Part 2-92 : Particular requirements for pedestrian-controlled mains-operated lawn
scarifies and aerators
SASO-IEC-60335-2-94-2014 - Household and similar electrical appliances - Safety
- Part 2-94 : Particular requirements for scissor type grass shears
SASO-IEC-60335-2-96-2010- Household and similar electric appliance-safety-Part
2-96: Particular requirements for flexible sheet heating elements for room heating
SASO-IEC-60335-2-97-2014- Household and similar electrical appliances - safety
- Part 2- 97: Particular requirements for Drivers for rolling shutters, awnings, blinds
and similar
SASO-GSO-IEC 60335-2-98-2012- Household and similar electrical appliances Safety - Part 2-98: Particular requirements for humidifiers
SASO-IEC-60335-2-99-2009- Household and similar electrical appliances - Safety
- Part 2-99 : Particular requirements for commercial electric hoods
SASO-GSO-60335-2-100-2012 - electrical appliances - safety - Part 2- 100:
Particular requirements for Garden blowers and vacuums
SASO-IEC-60335-2-101-2010- Household and similar electrical appliances Safety - Part 2-101: Particular requirements for vaporizers
SASO-GSO-IEC 60335-2-102-2012 - Household and similar electrical appliances Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning
appliances having electrical connections
SASO-IEC-60335-2-103-2007- Household and similar electrical appliances Safety - Part 2-103 : Particular requirements for drives for gates, doors and
windows
SASO-IEC-60335-2-104-2007- Household and similar electrical appliances Safety - Part 2-104 : Particular requirements for appliances to recover and/or
recycle refrigerant from air conditioning and refrigeration equipment
SASO-IEC-60335-2-105-2014 - Household and similar electrical appliances Safety - Part 2-105: Particular requirements for multifunctional shower cabinets
SASO-IEC-60335-2-106-2009- Household and similar electrical appliances -
Page (24) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Household and
Similar Electrical
Appliances
Safety - Part 2-106: Particular requirements for heated carpets and for heating units
for room heating installed under removable floor coverings
SASO-IEC-60335-2-108-2008 - Household and similar electrical appliances Safety - Part 2-108: Particular requirements for electrolysers
SASO-2763-2008 – Safety and performance requirement for window airconditioners and their method of test
SASO-1236-2009 - Electric Cooking Ranges.
SASO-415-2007 - Drinking water coolers
Switches for
Household and
Similar Fixed
Electrical
Installations
SASO-GSO-IEC 60669-1-2014 - Switches for household and similar fixedelectrical installations Part 1: General requirements
SASO-IEC-60669-2-1-2010- Switches for household and similar fixed-electrical
installations Part 2-1: Particular requirements Electronic switches
SASO-IEC-60669-2-2-2010- Switches for household and similar fixed-electrical
installations Part 2-2: Particular requirements Electromagnetic remote-control
switches (RCS)
SASO-IEC-60669-2-3-2010- Switches for household and similar fixed-electrical
installations Part 2-3: Particular requirements Time-delay switches (TDS)
SASO-IEC-60669-2-4-2010- Switches for household and similar fixed-electrical
installations Part 2-4: Particular requirements for Isolating switches
SASO-51-1977 - Switches for domestic purposes
Batch certification
according to SA71
Rotating Machines
SASO-IEC 60034-1-2014- Rotating electrical machines-Part 1: Rating and
performance
SASO-609-1994 - Air-cooled electric motors
Batch certification
according to SA71
Lamps/Lighting
Equipment and
Accessories
SASO-1673-2000 - Electrical supply track systems for luminaires -Part 2: Mixed
supply systems - Section 1: Classes I and III
SASO-IEC-60598-1-2010- Luminaires - Part 1: General requirements and tests
SASO-1675-2000 - Luminaires - Part 2: Particular requirements -Section 2 :
Recessed luminaires
SASO-1681-2000- Luminaires-Part 2:Particular requirements Section8:Hand lamps
SASO-1683-2006 – Luminaires – Part 2 - Particular requirements - Section 10 Portable child-appealing luminaires
SASO-1684-2000 - Luminaires - Part 2 Particular requirements Section 17:
Luminaires for stage lighting, television, film and photographic studios (outdoor
and indoor).
SASO-1686-2000 - Luminaires - Part 2: Particular requirements Section 19: Airhandling luminaries
SASO-1687-2006 – luminaires – Part 2 - Particular requirements - Section 20 -
Page (25) of (56)
Batch certification
according to SA71
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Lamps/Lighting
Equipment and
Accessories
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Lighting chains
SASO-1688-2000 - Luminaires - Part 2: Particular requirements Section 22:
Luminaires for emergency lighting.
SASO-2722-2007-Luminaires- Part 2-24: Luminaires with limited surface
temperature
SASO-34-1998 - Tungsten filament lamps for domestic and similar general lighting
purposes
SASO-IEC-60432-1-2010- Incandescent lamps - Safety specifications - Part 1:
Tungsten filament lamps for domestic and similar general lighting purposes
SASO-1488-1999 - D.C. Supplied electronic ballasts for tubular fluorescent lamps
general and safety requirements.
SASO-1372-1998 - D.C supplied electronic ballast for tubular fluorescent lamps:
Performance requirements.
SASO-2015-2002 - D.C or A.C supplied electronic step-down convertors for
filament lamps-performance requirement
SASO-234-1981 - Bayonet lamp holder for general use
SASO-IEC 60238-2011 - Edison screw lamp holders
SASO-IEC-60921-2011-Ballasts for tubular fluorescent lamps-Performance
requirements
SASO-1489-1999 - A.C. supplied electronic ballasts for tubular fluorescent lamps General and safety requirements
SASO-1671-2000 - A.C.-supplied electronic ballasts for tubular fluorescent lamps Performance requirements.
SASO-508-2001 - Ballasts for tabular fluorescent lamps.
SASO-692-1994 - Ballasts for high pressure mercury vapour lamps.
SASO-1982-2001 - Metal halide lamps
SASO-IEC-62035-2010– Discharge lamps (excluding fluorescent lamps)
SASO-IEC-61050-2007- Transformers for tubular discharge lamps having a noload output voltage exceeding 1000 V (generally called neon-transformers) General and safety
SASO-IEC-60155-2011 – Glow-starters for fluorescent lamps
SASO-IEC-60662-2011 - High-pressure sodium vapour lamps
SASO-1131-1998 - High pressure mercury vapour lamps.
SASO-2814-2010 - Lighting of indoor work places
SASO-1672-2005 - Electrical supply system for luminaires
SASO-139-1979 - Tubular fluorescent lamp for general lighting service.
Page (26) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Lamps/Lighting
Equipment and
Accessories
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-147-1979 - Starters for fluorescent lamps.
SASO-1984-2001 - Capacitors for use in tubular fluorescent and other discharge
lamp circuits
SASO-1491-1999 - Ballasts for discharge lamps (excluding tubular fluorescent
lamps) general and safety requirements.
SASO-1493-1999 - Auxiliaries for lamps - Starting devices (other than glow
starters) - General and safety requirements.
SASO-GSO-IEC-61347-2-2-2015- Lamp control gear - Part 2-2: Particular
requirements for d.c. or a.c. supplied
SASO-61347-2-3-2011 - Lamp control gear Part 2-3: Particular requirements for
a.c. supplied electronic ballasts for fluorescent lamps
SASO-GSO-61347-2-4-2009 - Lamp control gear - Part 2-4: Particular
requirements for d.c. supplied electronic ballasts for general lighting
SASO-IEC-61347-2-5-2007 - Lamp control gear - Part 2-5: Particular requirements
for d.c. supplied electronic ballasts for public transport lighting
SASO-IEC-61347-2-6-2007 - Lamp control gear Part 2-6: Particular requirements
for d.c. supplied electronic ballasts for aircraft lighting
SASO-IEC-61347-2-7-2010 - Lamp control gear - Part 2-7: Particular
requirements for d.c. supplied electronic ballasts
SASO-GSO-IEC-61347-2-8-2015- Lamp control gear - Part 2-8: Particular
requirements for ballasts for fluorescent lamps
SASO-GSO-IEC 61347-2-9-2015 - Lamp control gear - Part 2-9: Particular
requirements for ballasts for discharge lamps (excluding fluorescent lamps)
SASO-IEC-61347-2-10-2010– Lamp control gear - Part 2-10: Particular
requirements for electronic invertors and convertors for high-frequency operation
of cold start tubular discharge lamps (neon tubes)
SASO-IEC-61347-2-11-2010 - Lamp control gear - Part 2-11: Particular
requirements for miscellaneous electronic circuits used with luminaires
SASO-GSO-IEC-61347-2-12-2015- Lamp control gear - Part 2-12: Particular
requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps
(excluding fluorescent lamps)
SASO-GSO-IEC-61347-2-13-2015- Lamp control gear Part 2-13: Particular
requirements for d.c. or a.c. supplied electronic control gear for LED modules
SASO-IEC-62031-2008 - LED modules for general lighting - Safety specifications
SASO-IEC-61195-2010- Double-capped fluorescent lamps - Safety specifications
Page (27) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Audio, Video and
Similar Electronic
Apparatus
SASO-IEC-60065-2014- Audio, video and similar electronic apparatus- Safety
requirements
SASO-1969-2001 - equipment for speech audiometry
SASO-1278-1998 - Ordinary television receivers
SASO-1323-1997 - Sound broadcast radio receiver - Part 2: General requirements
SASO-1322-1997 - Low power radio frequency devices
Batch certification
according to SA71
Switches for
Appliances and
Automatic Controls
for Electrical
Household
Appliances
SASO-51-1977 - Switches for domestic purposes.
Batch certification
according to SA71
Installation
Accessories,
Connection Devices
and Protective
Devices
SASO-2684-2007 - general requirements for enclosures for accessories for house
hold and similar fixed electrical installations
SASO-2203-2015-Plugs & socket-outlets for Household & similar General use 220V
SASO-2204-2003-Plugs & socket-outlets for Household & similar General use 125V
SASO-2685-2007 - low-voltage fuses – Part 2 : Supplementary requirements for
fuses for use by authorized persons (fuses mainly for industrial application)
SASO-2815-2010 – Safety requirements for cord extension sets
SASO-704-1993 - Pressure type thermostats for use in house hold electrical
appliances
SASO-2018-2002 - Electrical relays-part5 insulation tests for electrical relays
Batch certification
according to SA71
IT, Office and
Telecommunications
Equipment
SASO-GSO-IEC 60950-1-2012 - Information technology equipment - Safety - Part
1: General requirements
Batch certification
according to SA71
Photovoltaic
Equipment
SASO-IEC 61730-1-2008- Photovoltaic (PV) module safety qualification - Part 2:
Requirements for testing
SASO-IEC 61215-2006- Crystalline silicon terrestrial photovoltaic (PV) module Design qualification and type approval
Batch certification
according to SA71
SASO-IEC-62058-11-2010– Electricity metering equipment (AC) – Acceptance
Inspection - Part 11: General acceptance inspection methods
SASO 426-1998 - Class 0.5, 1, 2 Induction type watt-hour meter I
SASO-1224-1998 - Safety requirements for indicating and recording electrical
measuring instruments and their recording accessories
SASO-537-1994 - Electronic commercial balances.
SASO-1825-2001 - Radar equipment for the measurement of the speed of vehicles
Batch certification
according to SA71
Measurement,
Control and
Laboratory
Equipment
Page (28) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Transformers,
Reactors and
Power Supplies
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-422-1994 - Power transformers.
SASO-IEC 61558-1-2010 - Safety of power transformers, power supply units and
similar apparatus - Part 1: General requirements and tests
SASO-IEC 61558-2-1-2014 - Safety of power transformers, power supply units and
similar apparatus - Part 2-1: Particular requirements for separating transformers for
general use
SASO-IEC 61558-2-2-2009- Safety of power transformers, power supplies,
reactors and similar products - Part 2-2: Particular requirements and tests for
control transformers and power supplies incorporating control transformers
SASO-IEC 61558-2-3-2006 - Safety of power transformers, power supply units and
similar apparatus - Part 2-3: Particular requirements for ignition transformers for
gas and oil burners
SASO-IEC 61558-2-4-2006 - Safety of power transformers, power supply units and
similar apparatus - Part 2-4: Particular requirements for isolating transformers for
general use
SASO-IEC 61558-2-5-2006 -Safety of power transformers, power supply units and
similar apparatus - Part 2-5: Particular requirements for shaver transformers and
shaver supply units
SASO-IEC 61558-2-6-2006 - Safety of power transformers, power supply units and
similar - Part 2-6: Particular requirements for safety isolating transformers for
general use
SASO-IEC 61558-2-7-2006 - Safety of power transformers, power supply units and
similar - Part 2-7: Particular requirements for transformers for toys
SASO-IEC 61558-2-8-2006 - Safety of power transformers, power supply units and
similar apparatus - Part 2-8: Particular requirements for bell and chime transformers
SASO-IEC 61558-2-13-2006 - Safety of power transformers, power supply units
and similar apparatus - Part 2-13: Particular requirements for auto-transformers for
general use
SASO-GSO-IEC 61558-2-15-2015 - Safety of power transformers, power supply
units and similar - Part 2-15: Particular requirements for isolating transformers for
the supply of medical locations
SASO-IEC 61558-2-17-2006 - Safety of power transformers, power supply units
and similar - Part 2-17: Particular requirements for transformers for switch mode
power supplies
SASO-IEC 61558-2-20-2006 - Safety of power transformers, power supply units
and similar devices - Part 2-20: Particular requirements for small reactors
SASO-IEC 62040-1-2009- Uninterruptible power systems (UPS) - Part 1: General
and safety requirements for UPS
Page (29) of (56)
Batch certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Standard / Normative document
Product
Certification
Scheme
SASO-IEC-61869-1-2009- Instrument transformers - Part 1: General requirements
SASO-2301-2005 - Instrument transformers-part 1 : Current transformers
SASO-2560-2006 - Instrument transformers - Part 2 : Inductive voltage
transformers
SASO-2748-2007 - Instrument transformers - Part 5:Capacitor voltage transformers
SASO-2562-2006 - Instrument transformers - Part 6: Requirements for protective
current transformers for transient performance
Batch certification
according to SA71
SASO-IEC-60745-2-2-2010- Hand-held motor-operated electric tools - Safety Part 2-2: Particular requirements for screwdrivers and impact wrenches
SASO-IEC-60745-2-4-2010- Hand-held motor-operated electric tools - Safety Part 2-4: Particular requirements for sanders and polishers other than disk type
SASO-IEC-60745-2-7-2010- Safety of hand-held motor-operated electric tools
Part 2-7: Particular requirements for spray-guns and non-flammable liquids
SASO-IEC-60745-2-8-2010 - Hand-held motor-operated electric tools - Safety –
Part 2-8: Particular requirements for shears and nibblers
SASO-IEC-60745-2-9-2010 - Hand-held motor-operated electric tools - Safety –
Part 2-9: Particular requirements for tappers
SASO-IEC-60745-2-16-2010 - Hand-held motor-operated electric tools-safety-Part
2-16: Particular requirements for tackers
Batch certification
according to SA71
EN 12983-1: 2000+A1:2004 Cookware. Domestic cookware for use on top of a
stove, cooker or hob. General requirements
Regulation (EC) No 1935/2004 Materials and articles intended to come into contact
with
Food
KR/EN/0112:2012 Metal containers for food materials
TR ENG N◦98 - Metal containers for food materials
EN 10333:2005 Steel for packaging. Flat steel products intended for use in contact
with foodstuffs, products or beverages for human and animal consumption. Tin
coated steel (tinplate)
SASO-2043:2002 the two piece steel round cans used for canning food-stuffs
SASO-75:2001 Three piece rounded steel cans used for canning food stuffs
GSO 2231:2012 General Requirements for the materials intended to come into
contact with food
Batch
Certification
according to SA71
and IQ71
EN 14350-1:2004 Child use and care articles. Drinking equipment. General and
mechanical requirements and tests
Batch
Certification
according to SA71
PRODUCT GROUP
Transformers,
Reactors and
Power Supplies
Electric Tools
Mechanical Products
Metal Containers
for Food
Plastic Containers
for Food Material
Page (30) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Plastic Containers
for Food Material
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
EN 14350-2:2004 Child use and care articles. Drinking equipment. Chemical
requirements and test methods
Regulation (EC) No 1935/2004 materials and articles intended to come into contact
with food
Regulation EC 10/2011 on plastic materials and articles intended to come into
contact with food
EN 12546-1:2000 Materials and articles in contact with foodstuffs. Insulated
containers for domestic use. Specification for vacuum ware, insulated flasks and
jugs
EN 12546-2:2000 Materials and articles in contact with foodstuffs. Insulated
containers for domestic use. Specification for insulated bags and boxes
Directive 2001/95/EC on general product safety
Directive 2009/48/EC on the safety of toys
Batch
Certification
according to SA71
SASO-2086:2002 Food packages
SASO-ASTM-D4316:2010 Standard Specification for Elastomeric Water Bottles
SASO-ISO-13106:2015 Plastics - Blow-moulded polypropylene containers for
packaging of liquid foodstuffs
SASO-1742:2000 Polyethylene bags for food packaging application
Metal Products
ASTM B221:2014: Standard Specification for Aluminum and Aluminum-Alloy
Extruded Bars, Rods, Wire, Profiles, and Tubes
ISO 4997:2015: Cold-reduced carbon steel sheet of structural quality
ISO 630-1:2011: Structural steels -- Part 1: General technical delivery conditions
for hot-rolled products
ISO 630-2:2011: Technical delivery conditions for structural steels for general
purposes
ISO 630-3:2011: Technical delivery conditions for fine-grain structural steels
ISO 630-4:2011: Technical delivery conditions for high-yield-strength quenched
and tempered
ISO 630-5:2011: Technical delivery conditions for structural steels with improved
atmospheric corrosion resistance
ISO 630-6:2011: Technical delivery conditions for seismic-proof improved
structural steels for building
ASTM A6 / A6M-2016: Standard Specification for General Requirements for
Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM A36/A36M-2014: Standard Specification for Carbon Structural Steel
BS EN 485-1:2016: Aluminium and aluminium alloys. Sheet, strip and plate.
Page (31) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Technical conditions for inspection and delivery
BS EN 485-2:2016: Aluminium and aluminium alloys. Sheet, strip and plate.
Mechanical properties
BS EN 485-3:2003: Aluminium and aluminium alloys. Sheet, strip and plate.
Tolerances on dimensions and form for hot-rolled products
BS EN 485-4:1994: Aluminium and aluminium alloys. Sheet, strip and plate.
Tolerances on shape and dimensions for cold-rolled products
BS EN 14509:2013: Self-supporting double skin metal faced insulating panels.
Factory made products. Specifications
ISO 16120-1:2011: Non-alloy steel wire rod for conversion to wire -- Part 1:
General requirements
ISO 16120-2:2011: Non-alloy steel wire rod for conversion to wire -- Part 2:
Specific requirements for general-purpose wire rod
ISO 16120-3:2011: Non-alloy steel wire rod for conversion to wire -- Part 3:
Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod
ISO 16120-4:2011: Non-alloy steel wire rod for conversion to wire -- Part 4:
Specific requirements for wire rod for special applications
Metal Products
ISO 4344:2004 - Steel wire ropes for lifts - Minimum requirements
ISO 4345:1988 - Steel wire ropes - Fibre main cores – Specification
ASTM B209-2014 - Standard Specification for Aluminum and Aluminum-Alloy
Sheet and Plate(Metric)
ASTM A 53/A53M:2012 - Standard Specification for Pipe, Steel, Black and HotDipped, Zinc-Coated, Welded and Seamless
ASTM A106/A 106M:2015 - Standard Specification for Seamless Carbon Steel
Pipe for High-Temperature Service
ASTM A283 / A283M :2013 Standard Specification for Low and Intermediate
Tensile Strength Carbon Steel Plates
ASTM A 333/A333M :2016 - Standard Specification for Seamless and Welded
Steel Pipe for Low-Temperature Service and Other Applications with Required
Notch Toughness
ASTM A 335/A 335M:2015 Standard Specification for Seamless Ferritic AlloySteel Pipe for High-Temperature Service
ISO 10799 -1-2011 - Cold-formed welded structural hollow sections of non-alloy
and fine grain steels -- Part 1: Technical delivery conditionsISO 10799-2-2011- Cold-formed welded structural hollow sections of non-alloy
Page (32) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
and fine grain steels - Part 2: Dimensions and sectional properties
Metal Products
ISO 13887 -2011 - Cold-reduced steel sheet of higher yield strength with improved
formability
ISO 13822 -2010 - Bases for design of structures - Assessment of existing
structures
ISO 13976 - 2016- Hot-rolled steel sheet in coils of structural quality and heavy
thickness
ISO 20723 – 2004 - Structural steels -- Surface condition of hot-rolled sections -Delivery requirements
ISO 22762-3 – 2010 Elastomeric seismic-protection isolators -- Part 3:
Applications for buildings – Specifications
ISO 3575 -2016 - Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon
steel sheet of commercial and drawing qualities
ISO 10799-2:2011 - Cold-formed welded structural hollow sections of non-alloy
and fine grain steels - Part 2: Dimensions and sectional properties
ISO 4950-1 -1995 + Amd 1:2003- High yield strength flat steel products -- Part 1:
General requirements
ISO 4950-2 -1995 + Amd 1:2003 - High yield strength flat steel products -- Part 2:
Products supplied in the normalized or controlled rolled condition
ISO 4950-3 – 1995 + Amd 1:2003- High yield strength flat steel products -- Part 3:
Products supplied in the heat-treated (quenched + tempered) condition
ISO 4951-1 -2001 - High yield strength steel bars and sections -- Part 1: General
delivery requirements
ISO 4951-2 – 2001 - High yield strength steel bars and sections -- Part 2: Delivery
conditions for normalized, normalized rolled and as-rolled steels
ISO 4951-3 -2001 - High yield strength steel bars and sections -- Part 3: Delivery
conditions for thermomechanically-rolled steels
ISO 4995 – 2014 - Hot-rolled steel sheet of structural quality
ISO 4996 -2014 - Hot-rolled steel sheet of high yield stress structural quality
ISO 4998 – 2014 - Continuous hot-dip zinc-coated carbon steel sheet of structural
quality
ISO 5952 -2011 - Continuously hot-rolled steel sheet of structural quality with
improved atmospheric corrosion resistance
ISO 6316 -2012 - Hot-rolled steel strip of structural quality
ISO 6930-1 – 2001 - High yield strength steel plates and wide flats for cold forming
-- Part 1: Delivery conditions for thermomechanically-rolled steels
Page (33) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metal Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ISO 6930-2 -2004 - High yield strength steel plates and wide flats for cold forming
-- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
ISO 7452 -2013 - Hot-rolled structural steel plates -- Tolerances on dimensions and
shape
ISO 7778 – 2014 - Steel plate with specified through-thickness characteristics
ISO 7788 -1985 - Steel -- Surface finish of hot-rolled plates and wide flats -Delivery requirements
ISO 9034 – 1987- Hot-rolled structural steel wide flats -- Tolerances on dimensions
and shape
ISO 9364 – 2011 - Continuous hot-dip aluminium/zinc-coated steel sheet of
commercial, drawing and structural qualities
ISO 9443 - 1991- Heat-treatable and alloy steels -- Surface quality classes for hotrolled round bars and wire rods -- Technical delivery conditions
ISO 9477 – 2015 High strength cast steels for general engineering and structural
purposes
ISO 17660-1 – 2006 Welding - Welding of reinforcing steel - Part 1: Load-bearing
welded joints
EN 10240 -1998 + Amd 1:2015 Internal and/or external protective coatings for
steel tubes. Specification for hot dip galvanized coatings applied in automatic
plants
EN 1123-1 -1999 Pipes and fittings of longitudinally welded hot-dip galvanized
steel pipes with spigot and socket for waste water systems. Requirements, testing,
quality control
EN 1123-2 – 2006+A1:2007 Pipes and fittings of longitudinally welded hot-dip
galvanized steel tube with spigot and socket for waste water systems. Dimensions
EN 1123-3 -2004 Pipes and fittings of longitudinally welded hot-dip galvanized
steel pipes with spigot and socket for waste water systems. Dimensions and special
requirements for vacuum drainage systems and for drainage systems in shipbuilding
Batch
Certification
according to SA71
and IQ71
KR/EN/0089: 2012 Galvanized steel plate0073
ASTM A653 /A653M-2015 e1 Standard Specification for Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
IQS 2096 – 2000 Carbon steel tubes suitable for sanitary applications -general
requirements
IQS 2128: 2000 Non alloy steel fittings
ASTM A105/A105M-2014 Standard Specification for Carbon Steel Forgings for
Piping Applications
Page (34) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metal Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ASTM A234 /A234M-2015 Standard Specification for Piping Fittings of Wrought
Carbon Steel and Alloy Steel for Moderate and High Temperature Service
KR/EN/0105:2012 Ductile iron pipes fittings, accessories, joints for water or gas
applications
ISO 2531: 2009+Cor1:2010 Ductile iron pipes, fittings, accessories & their joints
for water applications
KR/EN/0109: 2012 Mellable cast iron fittings threaded to ISO 7-1
ISO 49: 1994+Cor1:1997 Malleable cast iron fitting
IQS 572:1992 Structural steel such as Steel plate ,sheet and strip
Bars ,wire rod Hot rolled sections including hollow sections for general structural
purposes
Cold formed welded hollow sections for general structural purposes
IQS 1488: 1989 Dimensions for wrought aluminium and aluminium alloys, bars
extruded round tubes and sections
IQS 1489: 1989 Aluminium alloys –bars, extruded round tubes and sections for
general engineering purposes
TR ENG N◦ 108 - Aluminium profiles used for furniture
IQS 2272:2008 Cold-reduced carbon steel sheet of commercial & drawing qualities
IQS 2273: 2008 Cold-reduced carbon steel sheet of construction type
SASO 79:1998 (GSO 1418:2002) - Aluminium and aluminium alloys products for
building purposes - Part 1 – Rods, bars, tubes and profiles
SASO-ISO-2408:2014 (GSO 191/1995) - Steel wire ropes for general purposes Minimum requirements
SASO-413:2010 (GSO 1755:2010) - Covers and gratings of manhole and gully
and their frames
SASO-659:1994 (GSO 351:1994) - Heat- treated aluminium-alloy busbar material
of the aluminium-magnesium-silicon
SASO-726:1994 (GSO 397:1994) - Steel pipes - Plain end alloy and non-alloy Wall thickness and dimensions.
SASO-821:1994 (GSO 454:1994) - Cast iron manhole and handhole covers and
frames for telephone purposes.
SASO-822:1994 (GSO 455:1994) - Metal fibre
SASO-859:1994 (GSO 492:1994) - Threaded steel pipes.
SASO-860:1994 (GSO 493:1994) - Spheroidal Graphite cast iron
SASO-888:1994 (GSO 521:1994) - Submerged-arc spiral welded black steel pipes
with plain ends for general purposes
SASO-1011:2002 (GSO 1422:2002) - Black and hot-dipped galvanized steel pipes
Page (35) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metal Products
Mechanical
Systems and
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
suitable for screwing
SASO-1759:2000 (GSO 1444:2000) - Wrought aluminium and aluminium alloys
for building purposes Part 2: Sheets, strips and plates
SASO-2752:2008 – Aluminium composite panel for inside and outside cladding
SASO-GSO-2408:2010 Steel wire ropes for general purposes – Minimum
requirements
SASO-ISO 5002:2014 - Hot- rolled and cold-reduced electrolytic zinc-coated
carbon steel sheet of commercial and drawing qualities
SASO-ISO-9034:2005 (SASO 2512:2005) - Hot-rolled structural steel wide flats Tolerance on dimensions and shape
ISO 657-1:1989 -Hot-rolled steel sections – Part 1: Equal-leg angles – Dimensions
ISO 657-2:1989 - Hot-rolled steel sections-Part 2: Unequal-leg angles– Dimensions
ISO 16120-1:2011 non-alloy steel wire rod for conversion to wire – Part 1: General
requirements
ISO 16120-3:2011 non-alloy steel wire rod for conversion to wire – Part 3: Specific
requirements for rimmed and rimmed substitute, low-carbon steel wire rod
ISO 9329-1:1989 - Seamless steel tubes for pressure purposes – Technical delivery
conditions – Part 1: Unalloyed steels with specified room temperature properties
ISO 4344:2004 - Steel wire ropes for lifts - Minimum requirements
ISO 4345:1988 - Steel wire ropes - Fibre main cores – Specification
ISO 4951-1:2001 - High yield strength steel bars and sections – Part 1: General
delivery requirements
ISO 4998:2014 - Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon
steel sheet of structural quality
ISO 5002-2013 - Hot- rolled and cold-reduced electrolytic zinc-coated carbon steel
sheet of commercial and drawing qualities
ISO 6361-1:2011 Wrought aluminium and aluminium alloys – Sheets, strips and
plates – Part 1: Technical conditions for inspection and delivery
ISO 6361-2:2014 Wrought aluminium and aluminium alloys – Sheets, strips and
plates – Part 2: Mechanical properties
ISO 6361-5:2011 Wrought aluminium and aluminium alloys – Sheets, strips and
plates – Part 5: Chemical composition
ISO 7900:2006 – Steel wire and wire products for fences – Zinc-and zinc-alloy
coated steel barbed wire
ISO 8992:2005 Fasteners - General requirements for bolts, screws and threads
ISO 898-1:2013 - Mechanical properties of fasteners made of carbon steel and alloy
steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse
thread and fine pitch thread
Page (36) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Standard / Normative document
Product
Certification
Scheme
ISO 898-2:2012 - Mechanical properties of fasteners made of carbon steel and alloy
steel-Part 2:Nuts with specified property classes-Coarse thread and fine pitch thread
ISO 898-5:2012 - Mechanical properties of fasteners made of carbon steel and alloy
steel -- Part 5: Set screws and similar threaded fasteners with specified hardness
classes -- Coarse thread and fine pitch thread
SASO 14:1998 (GSO 675:1997) - Unplasticized polyvinyl chloride (UPVC) pipes
for potable water.
SASO-63-1977 - Fire extinguishers - Part 1- steel portable carbon dioxide fire
extinguishers
SASO 77:1977 - Grey cast iron pressure pipes
SASO-81-1998 - Fire extinguishers - Part 2: Portable bromochlorodifluoromethane fire extinguishers
SASO-121-1995 (GSO 586:1995) - Low - pressure regulators for valves of
liquefied petroleum gas cylinders
SASO-124-1999 (GSO 636/1996) - Fire extinguishers - Part 3: portable foam
extinguishers (gas pressure)
SASO-125-1999 (GSO 637/1996) - Fire extinguishers - Part 4: Portable dry
powder extinguishers.
SASO 177:1994 (GSO 187:1994) - Bourdon tube pressure and vacuum gauges
SASO-215-1981 - Seamless steel cylinders for compressed gases
SASO-236:1995 (GSO 583:1995) - Clay pipes for draining sewage and water
SASO-419-1985 (GSO 1582/2002) - Fire extinguisher - Part 5: Mobile carbon
dioxide fire extinguishers.
SASO-420-1985 (GSO 1583/2002)– Fire extinguishers part 6- mobile dry -powder
extinguishers
SASO-647-1994 (GSO 340/2003) - Fire extinguishing dry chemical powder Multipurpose phosphate.
SASO-775-1994 (GSO 426:1994) - Fiberglass reinforced polyester meter boxes.
SASO-826-1994 (GSO 459/1994) - Horizontal potable water tanks made from
polyester resins (Glass fibre reinforced)
SASO 827:1994 (GSO 460:1994) - Cast iron sanitary pipes and fittings for waste
water and ventilation
SASO-882-1994 (GSO 515/1994) - Cast iron drainage pipes and fittings - Spigot
series (Hubless) under ground
SASO 925:1994 (GSO 558:2004) - Transportable acetylene containers.
SASO-990-1998 - Dissolved acetylene cylinders – Basic Requirements.
SASO 1013:1998 (GSO 765:1997) - Welded plain - End steel tubes and pipes for
general uses
Batch
Certification
according to SA71
and IQ71
PRODUCT GROUP
Mechanical
Systems and
Components
Page (37) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Mechanical
Systems and
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO 1014:1998 (GSO 766:1997) - Socket and spigot ductile cast iron pipes for
pressure pipelines
SASO 1015:1998 (GSO 767:1997) - Ductile cast iron pressure pipelines - Flanges
SASO 1018:1998 (GSO 770:1998) - Flanged ductile cast iron pipes for pressure
pipelines
SASO 1020-1995 - Ductile cast iron pipes fittings and accessories for pressure
pipelines -general requirements
SASO 1021:1998 (GSO 772:1997) - Ductile cast iron fittings and accessories for
pressure pipelines
SASO 1023:1998 (GSO 774:1997) - Ductile cast iron pipes for pressure pipelines centrifugal cement mortar lining - General requirements
SASO 1070:1995 (GSO 588:1995) - Household water storage tanks made from
galvanized mild steel sheets
SASO-1129-1995 - Small medical gas cylinders -pin -index - yoke- type valve
connections
SASO-1209:1998 (GSO 898:1997) - Unplasticized Polyvinyl chloride (uPVC)
Pipes for soil, waste and vent inside the buildings.
SASO-1317-1997 (GSO 1480:2002) - Small medical gas cylinders - Pin-index
yoke type valve connections
SASO-1395:1998 (GSO 1123:2002) - unplasticized Polyvinyl Chloride (uPVC)
Pipes for buried, Drains and Sewers
SASO-1397:1998 (GSO 1125:2002) - Unplasticized polyvinyl chloride (uPVC)
pipe fittings for buried drains and sewers
SASO-1399:1998 (GSO 1127:2002) - Unplasticized polyvinyl chloride (uPVC)
pipe fittings for soil, waste and vent inside buildings.
SASO 1415:1998 (GSO 1425:1998)-Zinc coating on hot -dipped galvanized steel
pipes
SASO-1496-1999 (GSO 1611/2002) - Safety in the use of liquefied petroleum
gases (LPG) – Part 3: Gas alarm and shut-off system
SASO1536:1999 (GSO 979:1998) - Steel nails for use in wood and wood - base
material
SASO 1577:1999 (GSO 1438:2003) - Fiberglass reinforced resin sewer pipes.
SASO 1578:1999 (GSO 1439:2002) - Fiberglass reinforced resin buried pressure
pipes
SASO-1733:2000 (GSO 1184:2002) - Unplasticized polyvinyl chloride (uPVC)
pipe fitting - sealing ring type and plain socket for pressured water lines - injection
moulded fittings.
SASO-1753-2000 - Fire extinguishing dry chemical powder - General
specifications
Page (38) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Standard / Normative document
Product
Certification
Scheme
SASO-1783:2000 (GSO 1212:2002) - Water well casing and screen threaded pipes
from unplasticized polyvinyl chloride
SASO 1785:2000 (GSO 1214:2002) - Thermoplastic pipe fitting burst pressure test
SASO-1796-2000 (GSO 1225/2002) - Liquid foam concentrates for fire
extinguishing.
SASO-1974-2001 - Cast iron gate valves for buried water pipelines
SASO-2198:2003 - Rubber hoses for water suction and discharge
SASO-2219-2004 - Concrete cylinder pressure pipes bar-wrapped and fittings
SASO-2384-2005 - High pressure polyethylene pipe for the transportation of
gaseous fuels
SASO 2428:2005 - Rotary piston gas meters and turbine gas meters
SASO-ASTM-F1281:2014 Standard Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene (PEX.AL.PEX) Pressure Pipe
SASO-ASTM-F1667:2015 - Specification for Driven Fasteners: Nails, Spikes, and
Staples
SASO-ISO-11119-3-2007- Gas cylinders of composite construction-Specification
and test methods Part 3: Fully wrapped fibre reinforced composite gas cylinders
with non-load-sharing metallic or non-metallic liners
SASO-ISO 4205:2008 - Countersinks, 90 degrees, with parallel shanks and solid
pilots
SASO-ISO-6594:2014 (GSO 510/1994) – Cast iron drainage pipes and fittings –
Spigot series
ISO 1452-1:2009 Plastic piping systems for water supply and for buried and aboveground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride)
(PVC-U) – Part 1: General
ISO 1452-2:2009 Plastic piping systems for water supply and for buried and aboveground drainage and sewerage under pressure – Unplasticized poly(vinyl chloride)
(PVC-U) – Part 2: Pipes
ISO 3807:2013 Gas cylinders -- Acetylene cylinders -- Basic requirements and type
testing
ISO 3862:2009 Rubber hoses and hose assemblies -- Rubber-covered spiral-wirereinforced hydraulic types for oil-based or water-based fluids -- Specification
ISO 3949:2009 Plastics hoses and hose assemblies -- Textile-reinforced types for
hydraulic applications – Specification
ISO 4014:2011 Hexagon head bolts – Product grades A & B specifications
ISO 4016:2011 Hexagon head bolts – Product grade C
ISO 4033:2012 Hexagon high nuts (style 2) -– Product grade A & B
ISO 4034:2012 + Cor1:2013 Hexagon regular nuts (style 1) -- Product grade C
Batch
Certification
according to SA71
and IQ71
PRODUCT GROUP
Mechanical
Systems and
Components
Page (39) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Mechanical
Systems and
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ISO 4205:1991 - Countersinks, 90 degrees, with parallel shanks and solid pilots
ISO 4706:2008 – Gas cylinders -- Refillable welded steel gas cylinders – Test
pressure 60 bar and below
ISO 4709:2000 Composition cork -- Gasket material -- Classification system,
requirements, sampling, packaging and marking
ISO 5199:2002 - Technical specifications for centrifugal pumps -- Class II
ISO 6594:2006 - Cast iron drainage pipes and fittings – Spigot series
ISO 7165:2009 - Fire fighting - Portable fire extinguishers - Performance and
construction
ISO 7183:2007 - Compressed-air dryers -- Specifications and testing
ISO 7671: 2003 – Plastic piping systems for soil and waste discharge (low and
high temperature) inside buildings – Polypropylene (PP)
ISO 8773:2006 - Plastic piping systems for non-pressure underground drainage and
sewerage -- Polypropylene (PP)
ISO 8779:2010 +Amd1:2014 – Plastic piping systems - Polyethylene (PE) pipes
for irrigation – Specifications
ISO 9364:2011 – Continuous hot-dip 55% aluminium/zinc alloy-coated steel sheet
of commercial, drawing and structural qualities
ISO 9905:1994+Cor1:2005+ Amd1:2011 - Technical specifications for centrifugal
pumps -- Class I
ISO 9908:1993 +Amd1:2011 - Technical specifications for centrifugal pumps -Class III
ISO 11118:2015 Gas cylinders -- Non-refillable metallic gas cylinders –
Specification and test methods
ISO-11119-3-2013 Gas cylinders – Refillable composite gas cylinders and tubes –
Design, construction and testing -- Part 3: Fully wrapped fibre reinforced composite
gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic
liners
ISO 11199-1:1999 – Walking aids manipulated by both arms – Requirements and
test methods, Part 1: Walking frames
ISO 11199-3:2005 – Walking aids manipulated by both arms – Requirements and
test methods, Part 3: Walking tables
ISO 11601:2008 – Fire fighting -- Wheeled fire extinguishers - Performance and
construction
ISO 14531-1:2002 – Plastic pipes and fittings – Crosslinked polyethylene (PE-X)
pipe systems for the conveyance of gaseous fuels – metric series – Specifications,
Part 1: Pipes
ISO 21138-1:2007 - Plastics piping systems for non-pressure underground drainage
Page (40) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Mechanical
Systems and
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
and sewerage — Structured-wall piping systems of unplasticized poly(vinyl
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: Material
specifications and performance criteria for pipes , fittings and system
ISO 21138-2:2007 - Plastics piping systems for non-pressure underground
drainage and sewerage — Structured-wall piping systems of unplasticized
poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2:
Pipes and fittings with smooth external surface, Type A
ISO 21138-3:2007 - Plastics piping systems for non-pressure underground
drainage and sewerage — Structured-wall piping systems of unplasticized
poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3:
Pipes and fittings with non-smooth external surface, Type B
ISO 23297:2008 Thermoplastics hoses and hose assemblies -- Wire or synthetic
yarn reinforced single-pressure types for hydraulic applications – Specification
IQS 1358:1989 – Adjustable pressure regulator for lpg cylinders valve.
Directive 94/9/EC on the approximation of the laws of the Member States
concerning equipment and protective systems intended for use in potentially
explosive atmospheres
BS EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for
gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
BS EN 88-2:2007 Pressure regulators and associated safety devices for gas
appliances. Pressure regulators for inlet pressures above 500 mbar up to and
including 5 bar
ISO 23551-1:2012 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 1: Automatic and semi-automatic
valves
ISO 23551-2:2006 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 2: Pressure regulators
ISO 23551-3:2005 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 3: Gas/air ratio controls, pneumatic
type
ISO 23551-4:2005 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 4: Valve-proving systems for
automatic shut-off valves
ISO 23551-4:2005+Amd 1:2010 Application guidance for the valve-proving
system
ISO 23551-5:2014 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 5: Manual gas valves
ISO 23551-6:2014 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 6: Thermoelectric flame supervision
controls
ISO 23551-8:2016 Safety and control devices for gas burners and gas-burning
Page (41) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Mechanical
Systems and
Components
Kitchen Ware
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
appliances -- Particular requirements -- Part 8: Multifunctional controls
ISO 23551-9:2015 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 9: Mechanical gas thermostats
ISO 23551-10:2016 Safety and control devices for gas burners and gas-burning
appliances -- Particular requirements -- Part 10: Vent valves
Regulation (EC) No 1935/2004 materials and articles intended to come into contact
with food
Regulation EC 10/2011 on plastic materials and articles intended to come into
contact with food
IQS 1315:1988 Paper Cups
IQS 1487:1989 Paper Plates
IQS 1169:1988 Plastics-Single Use Plastic Cups, Plates and Containers
IQS 1632:1990 Plastic Straws for Liquid Drinking
IQS 1331:1990 Drinking Paper Tubes
IQS 241:1987 Plastics- melamine Plastics Tableware
IQS 1114:1987 Thermoplastic kitchenware
TR Eng N◦(12) - Aluminium table cutlery (spoons and forks)
IQS 1774:1998 Aluminium tiffin carrier utensils
TR CHEM. NO.(79) - forks, spoons, knifes (for single use only ) for food purposes
IQS 1672: Wrapping Tissue Paper
IQS 2167: Waxed Paper For General Packing
SASO-671:2010 Melamine plastics tableware.
SASO-829 : 1994 single-use rigid and semi-rigid plastics cups and containers for
packing beverages milk products, and for allied purposes.
SASO-2845: 2012 Standard specifications for low density polyethylene film
intended for use in food packing applications
SASO-GSO-839:1997 Food packages - part1 : general requirements
SASO-GSO-1863:2013 Food packages - part 2 plastic packages - general
requirements
KR/EN/0174 - Aluminium cooking utensils-general requirements
IQS 283:2002 Aluminium cooking utensils-general requirements
IQS 2237:2004 Stainless steel - serving utensils
IQS 2242:2006 Aluminium household utensils
IQS 285:2006 Kettles
Page (42) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
BS EN 13750:2002 Domestic water kettles for use on top of stove, cooker or hob.
Requirements and test methods
IQS 2238:2005 Cook Ware
EN 12983-1:2002 Cookware. Domestic cookware for use on top of a stove, cooker
or hob. General requirements
SASO-369:1998 Cold formed aluminium household utensils.
IQS 1777:1993 cooking vessels of steel
IQS 2276:2008 Stainless steel and silver-plated table cutlery-requirements
Kitchen Ware
BS EN 12778:2002 Cookware. Pressure cookers for domestic use
SASO-GSO-12778:2008 Cookware .Pressure cookers for Domestic-use
SASO-173:1994 Domestic pressure cooker
IQS 1139:1988 Aluminium Foil Catering Containers
SASO-2173:2003 Food packages made of aluminium foil
IQS 1731:1992 Aluminum foil used for wrapping food products
Batch
Certification
according to SA71
and IQ71
TR ENG N◦57 - Aluminium foil and flexible laminated for wrapping food products
and pharmaceutical products
IQS 1494:1989 Porcelain Tableware
ISO 6486-2:1999 Ceramic ware, glass-ceramic ware and glass dinnerware in
contact with food -- Release of lead and cadmium -- Part 2: Permissible limits
Stationery
Directive 2001/95/EC on general product safety
Directive 2009/48/EC on the safety of toys
ISO 8124-3:2010 +Amd1:2014 Safety of toys -- Part 3: Migration of certain
elements
BS EN 71-3:2013+A1:2014 Safety of toys. Migration of certain elements
IQS 1891: 1994 Rubber Ereaser
IQS1920:1994 Plastic Ereaser
IQS 1313:1988 Writing Pencils
IQS 1560:1990 Wooden Colouring Pencils
TR Chem N◦ 28 - pencil sharpener
IQS 1503:1990 Modeling Clay
IQS 875:1992 Ball Point Pens
IQS 1218: 1988 School Measuring Rulers
IQS 1700 - INK , for ball point pens
IQS 808 - Blue-Black –Writing Ink
IQS 1558 - Duplicating Ink
Page (43) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
IQS 835 - Carbon Paper
IQS 2120:1999 Duplicating Ink: Duplicating Ink for Single Drum Rotary Machine
Stationery
Baby Care
Products
SASO-GSO-1941:2010 Marking pens
SASO-1455:2010 Black lead pencils .
SASO-ISO-12757-1:2002 Ball point pens and refills -- Part 1: General use
SASO-1746:2000 Liquid ink pens having porous points
SASO-1748:2000 School Chalks
SASO-ISO-14145-1:2003 Roller ball pens and refills -- Part 1: General use
SASO-2268:2004 crayons for art and craft materials
SASO-1824:2001 Meter rules and rulers for school use
SASO-1962:2001 Carbonless copy paper
IQS 1420:1987 Plastics-Polycarbonated baby feeding bottles
KR-CH-0130:2012 Feeding Bottles
TR Chem N◦2 - Insulated domestic water jug
TR Chem N◦32 - Plastic Box For Preserving Food Stuffs At Low Temperature
KR/CH/0124: 2012 Babies elastomeric feeding bottles teats
KR/CH/0154: 2012 Baby soother
BS EN 1400:2013+A1:2014 Child use and care articles. Soothers for babies and
young children. Safety requirements and test methods
BS EN 14350-2:2004 Child use and care articles. Drinking equipment. Chemical
requirements and test methods
BS EN 12546-1:2000 Materials and articles in contact with foodstuffs. Insulated
containers for domestic use. Specification for vacuum ware, insulated flasks and
jugs
BS 7368:1990 Specification for babies' elastomeric feeding bottle teats
BS EN 14350-1:2004 Child use and care articles. Drinking equipment. General and
mechanical requirements and tests
BS EN 1273:2005 Child use and care articles. Baby walking frames. Safety
requirements and test methods
BS EN 1929-1:1998 Basket trolleys. Requirements and tests for basket trolleys
with or without a child carrying facility
BS 7368:1990 Specification for babies' elastomeric feeding bottle teats
Regulation (EC) No 1935/2004 materials and articles intended to come into contact
with food
Regulation EC 10/2011 on plastic materials and articles intended to come into
contact with food
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
ASTM F963- 2011 Standard Consumer Safety Specification For Toy Safety
Page (44) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Baby Care
Products
Furniture and
Miscellaneous
Items
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ASTM F406- 2015 Standard Consumer Safety Specification For Non-Full-Size
Baby Cribs/Play Yards , Play Yards
ASTM F2906- 2013 Standard Consumer Safety Specification For Bedside Sleepers
ASTM F 2088- 2015 Standard Consumer Safety Specification for Infant Swings
ASTM F 2167- 2016 Standard Consumer Safety Specification for Infant Bouncer
Seats
SASO-1877:2010 Babies' elastomeric feeding bottle teats
SASO -1875:2001 Feeding Bottles.
SASO-1954:2010 Babies' dummies (pacifiers).
SASO-GSO-2015: 2010 Soothers for babies and young children - Part 1: General
safety requirements
SASO-1307:1997 Chairs and tables for Educational Institutions- part1: General
Requirements
SASO-ISO-7175-1: 2008 Children's cots and folding cots for domestic use -- Part
1: Safety requirements
SASO-2454:2005 Domestic and contract furniture-part five: Inclusion of glass in
the construction of table
SASO-GSO-12227-1 : 2010 Playpens for domestic use. Safety requirements
SASO-GSO-EN-15372 :2010 Furniture - Strength, durability and safety Requirements for non-domestic tables
SASO-GSO-EN-1725 :2010 Domestic furniture - Beds and mattresses - Safety
requirements and test methods
SASO-1586 :2007 school furniture - part 4: ceramic writing boards and bulletin
boards
SASO-1309: 1997 Office Furniture Part 1 : Chairs
SASO-1341 :1998 Office Furniture - Part : 3 : Desks and Tables.
SASO-1343 :1998 Office Furniture - Part 5 : Filing Cabinets.
SASO-1498 :1999 Office Furniture - Part 7 : Storage Unit.
SASO-1500 :1999 Domestic and contract Furniture Part 1: General Requirements
for Settees.
SASO-1587 :1999 Domestic and contract furniture - part 3 : general requirements
for tables
SASO-1939 :2001 Spring interior mattresses for domestic bedding for adult use.
SASO-ISO-9221-1 :2005 Furniture -- Children's high chairs -- Part 1: Safety
requirements
SASO-823 :1994 Steel office furniture
SASO-GSO-EN-13761: 2009 Office furniture - Visitors chairs
SASO-1837: 2001 Office furniture -Part 9:ergonomics principles in the design and
selection of office furniture
SASO-1838 :2001 Office furniture -part 10:Specifcation for design and dimensions
of office workstations, desks, tables and chairs
SASO-1835 :2001 School furniture-part 5:specification for strength and stability of
Page (45) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Furniture and
miscellaneous items
Metrological
Materials
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
storage furniture for educational institutions
SASO-1836 2001 School furniture - Part 6:specification for security of fixed secure
storage furniture for educational institutions
SASO-2001: 2002 Laboratories - part 1: recommendations on laboratory and
laboratory furniture
SASO-2157: 2003 Laboratories - part3 : recommended work surfaces
SASO-1442 :1998 Polyethylene mobile garbage bins .
SASO-624 :1990 Plastic bottles used for bottling chemical materials and products .
SASO-ISO-8317 :2008 Child-resistant packaging -- Requirements and testing
procedures
SASO-936 :1994 Polyethylene bags for general purposes.
SASO-ISO-25518: 2010 Single-use rubber gloves for general applications –
Specification
SASO-2622 :2009 rubber general purpose, household or beautician
SASO-1945 : 2001 Refuse sacks made from polyethylene.
SASO-2393: 2005 Plastics buckets
SASO-ASTM-C1613: 2010 Standard Specification for Precast Concrete Grease
Interceptor Tanks
ISO 525:2013 Bonded abrasive products – General requirements
IQS 359:2003 Razor blades
KR/EN/0123: 2012 Shaving systems-multiblade-cartridges
TR Eng N◦20 - Shaving systems multi-blades cartridges specification
IQS 58:1988 Safety matches
ISO 9994:2005+Amd 1:2008 Clarification of structural requirements
ISO 22702:2003+ Amd 1:2008 Clarification of requirements and addition of safety
symbols
SASO-ASTM-F400: 2010 Standard Consumer Safety Specification for Lighters
SASO-ISO-22702: 2009 Utility lighters -- General consumer-safety requirements
SASO-GSO-1787:2007 Safety Match
BS EN 12470-1:2000+A1:2009 Clinical thermometers. Metallic liquid-in-glass
thermometers with maximum device
BS EN 12470-2:2000+A1:2009 Clinical thermometers. Phase change type (dot
matrix) thermometers
EN ISO 5171:2010 Gas welding equipment. Pressure gauges used in welding,
cutting and allied processes
BS EN 837-1:1998 Pressure gauges. Bourdon tube pressure gauges. Dimensions,
Page (46) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metrological
Materials
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
metrology, requirements and testing
EN 837-3:1998 Pressure gauges. Diaphragm and capsule pressure gauges.
Dimensions, metrology, requirements and testing
BS EN 12645:2014Tyre pressure measuring instruments. Devices for inspection of
pressure and/or inflation / deflation of tyres for motor vehicles. Metrology,
requirements and testing
EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied
Petroleum Gas (LPG) pressure vessels
EN 12094-10 :2003 Fixed firefighting systems. Components for gas extinguishing
systems. Requirements and test methods for pressure gauges and pressure switches
SASO-1331:1998 Tyre pressure gauges for motor vehicles
SASO-GSO-12645:2010 Pressure gauges-Apparatus for inspection of pressure and/
or inflation of tyres for motor vehicles-metrology, requirements and testing
SASO-EN-837-3:2015 Pressure gauges - Part 3 : Diaphragm and capsule pressure
gauges - Dimension , metrology. requirements and testing
SASO-177:1994 Bourdon tube pressure and vacuum gauges
SASO-1926:2001 Indicating and recording pressure gauges ,vacuum gauges and
pressure-vacuum gauges with elastic sensing elements (ordinary instruments).
SASO-1968:2001 Pressure balances
SASO-1360 :1998 Barometers
SASO-GSO-137-1:2008 Gas Meters. Part 1: Requirements
SASO-GSO-3930:2008 Instruments for measuring vehicle exhaust emissions
SASO-1997:2002 Diafragm gasmeter
Batch
Certification
according to SA71
and IQ71
SASO-OIML-D26:2010 Glass delivery measures - Automatic pipettes
SASO-OIML-R15:2010 Instruments for measuring the hectolitre mass of cereals
SASO-OIML-R41:2010 Standard burettes for verification officers
SASO-1137:1996 Length measures for general use.
SASO-1364:1998 External micrometers.
SASO-ISO-1757:2006 Personal photographic dosemeters
SASO-736:1993 Commercial Length Measured.
SASO-OIML-R135:2008 spectrophotometers for medical laboratories
SASO-OIML-D31:2008 General requirements for software controlled measuring
instruments
SASO-OIML-R66:2006 Length measuring instruments
SASO-OIML-D25:2006 Vortex meters used in measuring systems for fluids
Page (47) of (56)
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metrological
Materials
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-OIML-D24:2006 Total radiation pyrometers
SASO-OIML-R59:2006 Moisture meters for cereal grains and oilseeds
SASO-OIML-R123:2006 Portable and transportable X-ray fluorescence
spectrometers for field measurement of hazardous elemental pollutants
SASO-OIML-R116:2006 Inductively coupled plasma atomic emission
spectrometers for measurement of metal pollutants in water
SASO-OIML-R100:2006 Atomic absorption spectrometers for measuring metal
pollutants in water
SASO-OIML-R136-1:2006 Instruments for measuring the areas of leathers
SASO-OIML-R128:2008 Ergometers for foot crank work
SASO-ISO-10343:2009 Ophthalmic instruments – Ophthalmometers
SASO-GSO-R54:2009 PH scale for aqueous solutions
SASO-2743:2007 standard graduated glass flasks for verification officers
SASO-2235:2004 Non-invasive mechanical sphygmomanometers
SASO-2349:2005 The Scale of Relative Humidity of air Certified Against
Saturated salt Solutions
SASO-2348:2005 measuring systems for the mass of liquids in tanks
SASO-55:2006 Speedometers, mechanical odometers and chronotachographs for
motor vehicles. Metrological regulations
SASO-2568:2006 High-precision line measurement of length
SASO-2282:2004 refractometers for the measurement of the sugar contest of fruit
juices
SASO-2281:2004 Multi-Dimensional Measuring Instruments
SASO-1967:2001 Standard one metre bar for verification officers.
SASO-ISO-3650:2014 Geometrical Product Specifications (GPS) -- Length
standards -- Gauge blocks
SASO-1986:2001 Measuring instrumentation for human response to vibration
SASO-1969:2001 equipment for speech audiometry
Directive 2009/23/EC on non-automatic weighing instruments
KR/EN/0176:2013,GS 94:1988 Jeweler’s Balances
KR/EN/0177: 2013, GS 5:1984 Self and Simi-self Indicating Balances
KR/EN/0178:2013, GS 120:1989 Platform Balances
KR/EN/0179:2013, SASO 65:1977 Non-Automatic Equilibrium Balances
SASO-128 :1989 Platform balances
SASO-210:1981 Knives and Steps for Balances
Page (48) of (56)
Batch
Certification
according to SA71
and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Metrological
Materials
Household Burning
Fuel Appliances
Fluid Systems and
Components for
General Use
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-253:1984 Self and Semi-self Indicating commercial balances of medium
precision
SASO-523:1998 Jewellers balance
SASO-537:1994 Electronic Commercial Balances
SASO-67:1977 Non automatic weighing instruments
SASO-GSO-R76-1:2009 Non-automatic weighing instruments. Part 1:
Metrological and technical requirements – Tests
SASO-OIML-R134-1:2006 Automatic instruments for weighing road vehicles in
motion. Total vehicle weighing
SASO-OIML-R106-1:2006 Automatic rail-weighbridges. Part 1 : Metrological and
technical requirements – Tests
SASO-535:1994 Weighbridges for road vehicles (trucks)
IQS 2283:2008 Paraffin unflued space heating and cooking appliances for
domestic use
IQS 59-1 : 1978 Kerosene - fired water heaters for household use
IQS 375:1989 Domestic LPG cooking appliances
IQS 59-2:1988 Gas-fired water heaters for household use
IQS 1080:1986 Radiant gas fired domestic heaters
BS EN 26 :2015 Gas-fired instantaneous water heaters for the production of
domestic hot water
BS EN 30-1-1:2008+A3:2013 Domestic cooking appliances burning gas. Safety.
General
SASO-GSO-203-2-10:2010 Gas heated catering equipment- Specific requirements
- Chargrills
SASO-EN-30-1-1:2012 Domestic cooking appliances burning gas -Part 1-1: Safety
- General
SASO-EN-30-1-2 :2012 Domestic cooking appliances burning gas - Part 1-2:
Safety - Appliances having forced-convection ovens and/or grills
SASO-EN-30-1-3:2012 Domestic cooking appliances burning gas Part 1-3: Safety Appliances having a glass ceramic hotplate
SASO-EN-30-1-4:2012 Domestic cooking appliances burning gas Part 1-4: Safety Appliances having one or more burners with an automatic burner control system
SASO-GSO-203-1:2010 Gas heated catering equipment-Part 1:General safety rules
SASO-GSO-203-2-2:2010 Gas heated catering equipment-Specific requirements Ovens
SASO-168:2015 domestic cookers for use with liquefied petroleum gases (LPG)
ISO 3807:2013 Gas cylinders – Acetylene cylinders – Basic requirements and type
testing
ISO 5199:2002 Technical specifications for centrifugal pumps - Class II
ISO 9905:1994+Cor1:2005+Amd1:2011 Technical specifications for centrifugal
Page (49) of (56)
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
and IQ71
Batch
Certification
according to SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Fluid Systems and
Components for
General Use
pumps - Class I
ISO 3862:2009 Rubber hoses and hose assemblies – Rubber-covered spiral-wirereinforced hydraulic types for oil-based or water-based fluids – Specification
ISO 3949:2009 Plastics hoses and hose assemblies – Textile-reinforced types for
hydraulic applications – Specification
ISO 4709:2000 Composition cork -- Gasket material -- Classification system,
requirements, sampling, packaging and marking
ISO 23297:2008 Thermoplastics hoses and hose assemblies – Wire or synthetic
yarn reinforced single-pressure types for hydraulic applications – Specification
ISO 9908:1993 Technical specifications for centrifugal pumps – Class III
ISO 9908:1993+Amd 1:2011 Technical specifications for centrifugal pumps -Class III
ISO 7183:2007 Compressed-air dryers – Specifications and testing
ISO 3807:2013 - Acetylene cylinders -- Basic requirements and type testing
ISO 7671: 2003 - Plastics piping systems for soil and waste discharge (low and
high temperature) inside buildings -- Polypropylene (PP)
ISO 8773:2006 - Plastics piping systems for non-pressure underground drainage
and sewerage -- Polypropylene (PP)
ISO 8779: 2010+Amd1:2014 - Polyethylene (PE) pipes for irrigation –
Specifications
SASO-1228:1998 (GSO 917/1997) Metal aerosol dispensers
Tools (NonElectric)
ISO 11148-1:2011 Hand-held non-electric power tools – Safety requirements – Part
1: Assembly power tools for non-threaded mechanical fasteners
ISO 11148-2:2011 Hand-held non-electric power tools – Safety requirements –
Part 2: Cutting-off and crimping power tools
ISO 11148-3:2012 Hand-held non-electric power tools – Safety requirements –
Part 3: Drills and tappers
ISO 11148-4:2012 Hand-held non-electric power tools – Safety requirements –
Part 4: Non-rotary percussive power tools
ISO 11148-5:2011 Hand-held non-electric power tools – Safety requirements –
Part 5: Rotary percussive drills
ISO 11148-6:2012 Hand-held non-electric power tools – Safety requirements –
Part 6: Assembly power tools for threaded fasteners
ISO 11148-7:2012 Hand-held non-electric power tools – Safety requirements –
Part 7: Grinders
ISO 11148-8:2011 Hand-held non-electric power tools – Safety requirements –
Part 8: Sanders and polishers
Page (50) of (56)
Batch
Certification
according to SA71
Batch
Certification
according to
SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
Tools (NonElectric)
ISO 11148-9:2011 Hand-held non-electric power tools – Safety requirements –
Part 9: Die grinders
ISO 11148-10:2011 Hand-held non-electric power tools – Safety requirements –
Part 10: Compression power tools
ISO 11148-11:2011 Hand-held non-electric power tools – Safety requirements –
Part 11: Nibblers and shears
ISO 11148-12:2012 Hand-held non-electric power tools – Safety requirements –
Part 12: Circular, oscillating and reciprocating saws
SASO-ISO 6787:2005 - assembly tools for screws and nuts - adjustable wrenches
ISO 5743:2004 - Pliers and nippers - General technical requirements
ISO 9657:2004 - Pliers and nippers for electronics - General technical requirements
ISO 1711-1:2015 - Assembly tools for screws and nuts - Technical specifications Part 1: Hand operated wrenches and sockets
Equipment and
Machineries
IEC 60204-1:2005+Amd1:2008 CSV - Safety of machinery - Electrical equipment
of machines - Part 1: General requirements
SASO-115-1:2011 Safety of escalators and moving walks - Part 1: Construction
SASO-201:1994 Steel wire ropes for electric lifts
SASO-228:1981 Wire cloth test sieves.
SASO-229:1981 Perforated plate test sieves.
SASO-466:2003 Electric lifts for passengers or goods part 1: General
requirements.
SASO-467-2003 Electric lifts for passengers or goods Part 2: Safety requirements.
SASO-564:1994 Agricultural tractors - power take-off drive shafts for machines
and implements.
SASO-611:1994 Electric lifts for passengers or goods - Part10: Single - speed
polyphase induction motors for driving lifts .
SASO-746:1993 Agricultural equipment - roll over protection structures for
agricultural tractors
SASO-749:1993 (GSO 1587:2002) Earth moving machinery - General
requirements
SASO-754:1993 Safe use of cranes - Part 1: General requirements.
SASO-971:1998 General requirements for agricultural tractors and self - propelled
machines.
SASO-977:1998 Safe use of cranes - Part 2: Mobile cranes.
SASO-1217:1998 Coupling capacitors and capacitor dividers.
SASO-1243:1998 General requirement for line shaft vertical turbine pumps.
SASO-1240:1998 Submersible vertical turbine pumps - General Requirements
Page (51) of (56)
Batch
Certification
according to
SA71
Batch
Certification
according to
SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Equipment and
Machineries
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
SASO-1311:2001 Agricultural equipment general safety requirements
SASO-1338:1998 Steam boiler s- Part 8: Safety requirements.
SASO-1391:1998 Polyethylene sheeting for Agricultural Purposes.
SASO-1442:1998 Polyethylene mobile garbage bins
SASO-1486:1999 Earthing electrodes
SASO-ISO-5390:2000 (GSO 1552:2002) - Compressors - classification.
SASO-1736:2000 Polyethylene Sheeting For Greenhouse Applications
SASO-2446:2005 Fork lift trucks hook-on type fork arms and fork arm carriages mounting dimensions
SASO-2447:2005 Forklift trucks - fork lift arms - technical characteristics and
testing
SASO-2459:2005 Agricultural Wheeled Tractors - Three_ Point Linkage - Part 1:
Categories 1, 2 , 3 and 4
SASO-2584:2006 Boilers - Part 5: Requirements for miniature boilers
SASO-2586:2006 Boilers - Part 3: requirements for fire tube boilers
SASO-2676:2007 Boilers - Part 4: Requirements for water tube boilers
SASO-2677:2007 Boilers – Part 6 : General requirements for design and
manufacture for hot water boilers
SASO-ISO:721:2008 Rock drilling equipment – Integral stems
SASO-ISO-722:2008 Rock drilling equipment - Hollow drill steels in bar form –
Hexagonal and round
SASO-ISO-723:2008 Rock drilling equipment - Forged collared shanks and
corresponding chuck bushing for hollow hexagonal drill steels
SASO-ISO-5680:2008 Equipment for working soil -- Tines and shovels for
cultivators -- Main fixing dimensions
SASO-ISO-8759-1:1998- Agricultural wheeled tractors – Front-mounted
equipment – Part 1: Power take-off and three-point linkage
SASO-ISO-12140:2005 Agricultural Machinery - Agricultural Trailers And Trailed
Equipment - Drawbar jacks
ISO 500-1:2014 Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3
and 4 -- Part 1: General specifications, safety requirements, dimensions for master
shield and clearance zone
ISO 500-2:2004 Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3
and 4 -- Part 2: Narrow-track tractors, dimensions for master shield and clearance
zone
ISO 500-3:2014 Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3
and 4 – Part 3: Main PTO dimensions and spline dimensions, location of PTO
ISO 730:2009+Amd1:2014 Agricultural wheeled tractors – Rear-mounted three-
Page (52) of (56)
Batch
Certification
according to
SA71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Equipment and
Machineries
Toys
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
point linkage – Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
ISO 3310-1: 2016 Test sieves – Technical requirements and testing – Part 1: Test
sieves of metal wire cloth
ISO 3310-2:2013 Test sieves – Technical requirements and testing – Part 2: Test
sieves of perforated metal plate
ISO 3310-3:1990 Test sieves – Technical requirements and testing – Part 3: Test
sieves of electroformed sheets
ISO 5390:1977 Compressors – classification
ISO 5692-1:2004 Agricultural vehicles – Mechanical connections on towed
vehicles - Dimensions for itch rings 50/30 mm cross section
ISO 5692-2:2002+Cor1:2004 – Agricultural vehicles – Mechanical connections on
towed vehicles – Coupling ring 40 with socket
ISO 8759-1:1998 - Agricultural wheeled tractors – Front-mounted equipment – Part
1: Power take-off and three-point linkage
ISO 8759-2:1998 - Agricultural wheeled tractors – Front-mounted equipment – Part
2: Stationary equipment connection
ISO 12140:2013 Agricultural Machinery - Agricultural Trailers And Trailed
Equipment - Drawbar jacks
ISO 19932-1:2013 Equipment for crop protection – Knapsack sprayers – Part 1:
Safety and environmental requirements
IQS 1787-1:1993 Safety of Toys: Part 1- Allowed Concentrations for Migration of
Dangerous Elements.
IQS 1787-2:1993 Safety of Toys: Part 2 Requirements and Test Methods
Flammability
IQS 1787-3:1993 Safety of Toys-Part 3- Requirements for Mechanical and Physical
Properties
ISO 8124-1:2014 Safety of toys -- Part 1: Safety aspects related to mechanical and
physical properties
ISO 8124-2 :2014 Safety of Toys-Flammability
ISO 8124-3:2010+Amd1:2014 Safety of Toys-Part 3- Migration of Certain
elements
ISO 8124-4:2014 Safety of Toys- Part 4 Swings, Slides, and similar activity toys
for indoor and outdoor family domestic use
Directive 2009/48/EC on the safety of toys
BS EN 71-1:2014 Safety of toys. Mechanical and physical properties
BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
BS EN 71-3:2013+A1:2014 Safety of toys. Migration of certain elements
BS EN 71-4:2013 Safety of toys. Experimental sets for chemistry and related
activities
Page (53) of (56)
Batch
Certification
according to
SA71
Batch
Certification
according to
SA71 and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
BS EN 71-5:2015 Safety of toys. Chemical toys (sets) other than experimental sets
BS EN 71-7:2014 Safety of toys. Finger paints. Requirements and test methods
BS EN 71-8:2011 Safety of toys. Activity toys for domestic use
BS EN 71-9:2005+A1:2007 Safety of toys. Organic chemical compounds.
Requirements
BS EN 71-12:2013 Safety of toys. N-Nitrosamines and N-nitrosatable substances
BS EN 71-14:2014 Safety of toys. Trampolines for domestic use
BS EN 1176-1:2008 Playground equipment and surfacing. General safety
requirements and test methods
BS EN 1176-2:2008 Playground equipment and surfacing. Additional specific
safety requirements and test methods for swings
BS EN 1176-3:2008 Playground equipment and surfacing. Additional specific
safety requirements and test methods for slides
BS EN 1176-4:2008 Playground equipment and surfacing. Additional specific
safety requirements and test methods for cableways
BS EN 1176-5:2008 Playground equipment and surfacing. Additional specific
safety requirements and test methods for carousels
BS EN 1176-6:2008 Playground equipment and surfacing. Additional specific
safety requirements and test methods for rocking equipment
Toys
Batch
Certification
according to
SA71 and IQ71
IEC 62115:2003+AMD1:2004+AMD2:2010 CSV Electric toys - Safety
ASTMF1487 – 2011 Standard Consumer Safety Performance Specification for
Playground Equipment for Public Use1
ASTM F1148- 2012 Standard Consumer Safety Performance Specification for
Home Playground Equipment
Vehicles and
Components
SASO-1063 :1995 Toys - General Safety requirements.
SASO-IEC-62115 :2007 Electric toys – Safety
SASO-IEC-60065 :2014 Audio, video and similar electronic apparatus - Safety
requirements
SASO-765 :1994 Playground equipment for children parks - Part 1 : General
safety
SASO-ISO-8098: 2008 Cycles -- Safety requirements for bicycles for young
children
SASO-1322 :1997 Low power radio frequency devices
UN ECE Reg 13 Rev 8 Braking on vehicles of categories M, N and O
UN ECE Reg 13H Rev 2 Braking of passenger cars
UN ECE Reg 54 Rev 3 Pneumatic tyres for commercial vehicles
UN ECE Reg 78 Rev 1 Braking of category L vehicles
UN ECE Reg 79 Rev 2 Steering equipment
UN ECE Reg 90 Rev 3 Replacement brake lining assemblies and drum-brake
Page (54) of (56)
Batch
Certification
according to
SA71 and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Vehicles and
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
linings for power-driven vehicles and their trailers
UN ECE Reg 108 Retreaded pneumatic tyres for motor vehicles
UN ECE Reg 109 Rev 1 Retreaded pneumatic tyres for commercial vehicles
SASO-932-1994 - Air Filters for internal Conduction Engines
SASO-1439-1998 - Full-flow lubricating oil filters for internal combustion engines
Dimensions
SASO-469-1993 - Motor vehicles - Dimensions and weights
SASO-769-1994 - Motor vehicles - door locks and door hinges
SASO-1490-2004 - Motor vehicle headlamps-safety requirement
SASO-82-2007 - Motor Vehicles - Engine Radiator
SASO-2260-2004 - Motor vehicles laminated safety glass
SASO-1438-2008 - Motor vehicles - General requirements
SASO-297-2003 - Motor vehicles - General safety requirements
SASO-1315-1997- Motor Vehicles - Head restraints and method of testing
SASO-526:1988 - Motor vehicles - Safety belts
SASO-1280-1998 - Motor vehicles - Safety requirements for pilgrim buses
SASO-1815-2001 - Motor vehicles - Speed limiters-Part 2: Technical requirements
SASO-1444-1998 - Motor vehicles - Speed limits -Part 1:General requirementsEquipment inspection , Certification and type approval
SASO-771-1994 - Motor Vehicles - Rear view mirrors
SASO-1276-1998 - Motor vehicles - General requirements for ambulances
SASO-442-1988 - Road vehicles - Sound signaling devices - Technical
specifications
SASO-572-1994 - Road vehicles retro - Reflective number plates and its methods
of test
SASO-2249-2004 - Motor Vehicle Identification Number(Vin) Requirements
SASO-2278-2011 - Motor vehicles - Spare parts-general requirements
SASO-2251-2004 - Motor Vehicles- VIN-Location and attachment
SASO-2250-2004 - Motor Vehicles- World manufacturer identifier code
SASO-2209-2003 - Motor vehicles child restraint system
SASO-2751-2007 - Road and rail tankers
KR/EN/0133:2012, KR/EN/0141:2012 Vehicles (Cars, Busses, Lorries,
Transportation trucks and extensions)
IQS 1383:1988 Laminated glass, Zone toughened glass, Toughened glass
IQS 81-1:2007 Lead-acid starter batteries /general requirements and test methods
IQS 81-2:2007 lead- acid starter batteries dimensions of batteries and marking of
terminals
Page (55) of (56)
Batch
Certification
according to
SA71 and IQ71
qf071-74, rev b
THE HASHEMITE KINGDOM OF
JORDAN
Accreditation Unit
Annex (2)
Issued on 15-02-2017
To The Accreditation Certificate No. JAS Cert - 001 Dated 15-02-2017
for SGS Societe Generale de Surveillance S.A – Jordan Branch
Scope of Accreditation
In the Field of Chemical Products, Food and Agricultural Products,
Construction Products, Electrical Products and Mechanical Products
Tyres and Rims
Motorcycles and
Bicycles and Their
Components
Product
Certification
Scheme
Standard / Normative document
PRODUCT GROUP
ISO 4000-2:2013 - Passenger car tyres and rims - Part 2: Rims
SASO-445-1986 - Passenger car tyres - Part 1: Nomenclature, designation,
marking, dimensions, load capacities and inflation pressure
SASO-447-1986 - Passenger car tyre - part 2: General requirement
SASO-1136-1996 - Multi-purpose vehicles, trucks, buses and trailers tyres-part3
general requirements
SASO-1134-1996 - Multi-purpose vehicles, trucks, buses and trailers tyres part1:
Nomenclature, designation, marking, dimensions, load capacities and inflation
pressures
SASO-2252-2004 - Motor Vehicles Tyres - Treadwear , Traction and Temperature
Resistance Grading
IQS 1328-2:2006 Passenger car tyres
IQS 1293:1988 Automobile rubber tubes
TR Chem 73 - Truck and bus tubes and tyres
TR Chem 78 - Motorcycle tyres
TR Chem 71 - Inner tubes for motorcycle tyres
IQS 1298:1988 Rubber tyres for bicycles
IQS 1299:1988 Rubber inner tubes for bicycles
Batch
Certification
according to
SA71 and IQ71
Batch
Certification
according to
IQ71
List of employees in the CAB who are technically responsible for issuing the certificate in the
scope of accreditation:
Chemical, Food and Agricultural Products: Eng. Shadi Jadallah / Supervisor
Construction Products: Mr. Khalil Alkuhun / Supervisor
Electrical and Mechanical Products: Eng. Mahdi Qandeel / Supervisor
Page (56) of (56)
qf071-74, rev b
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising