Compression Drivers / Ferrite CDX1-1746

Compression Drivers / Ferrite CDX1-1746
Compression Drivers / Ferrite
General Specifications
CDX1-1746
Power rating
40Wrms
1
Nominal impedance
8Ω
Frequency range
Sensitivity
1200-20,000Hz
110dB
2
Recommended min. crossover (12dB/oct)
Voice coil diameter
Voice coil material
2200Hz
44mm/1.75in
Edgewound copper clad aluminium
Magnet type
Ferrite
Diaphragm material
PETP film
Surround material
PETP film
Mounting Information
Features
Overall width
120mm/4.7in
Overall depth
56mm/2.2in
1" exit, ferrite magnet compression driver with 1.75" edgewound copper
Fitting
Screw (35mm, 1.38in dia)
clad aluminium voice coil
Throat exit
25.4mm/1in
40Wrms power handling (AES standard) and 110dB sensitivity
Unit weight
2.3kg/5.1lb
Sound Castle™ clamping ensures even pressure on diaphragm assembly for
reduced distortion
Packed Dimensions & Weight
One piece PETP diaphragm and surround
Single pack size W x D x H
Finite Element Analysis (FEA) used to optimise both magnet assembly and
140mm x 170mm x 70mm
/5.5in x 6.7in x 2.8in
acoustic design
Single pack weight
Multi pack (6) size W x D x H
3kg/6.6lb
430mm x 370mm x 90mm
/16.9in x 14.6in x 3.5in
8 Ω Frequency Response
Multi pack (6) weight
14kg/31lb
1. Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES
standard. Power calculated on minimum impedance.
2. Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environment.
Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement