Untitled

Untitled
A L PO L I C / f r m i c a
®
I N T E R I O R A N D E X T E R I O R S U R FA C I N G
INTERIOR AND EXTERIOR SIGNAGE
S U R FA C E T R E AT M E N T
FIRE PERFORMANCE
ALPOLIC /fr architectural Mica color panels are stocked
Fire resistant ALPOLIC /fr architectural Mica finish panels
with a FEVE LUMIFLON™ finish, a fluorocarbon paint
with a mineral filled core have been tested by independent
system that features excellent durability and weathering for
testing laboratories using nationally recognized tests.
®
architectural needs. A PVDF, Kynar finish is available as a
custom request. Available stock architectural Mica colors
include Mica Platinum, Mica Champagne and
Mica Anodic Clear.
®
This material meets all requirements of the International
Building Code for non-combustible construction:
IBC Listed
Please visit www.alpolic-northamerica.com or call technical
support for complete report listings and additional
information.
WARRANTY
Standard panel warranty:
10 Year
Finish warranty:
30 Year*
Call ALPOLIC Customer Ser vice for exclusions and warranty
®
details.*30 year warranty only applies to standard
S TA N D A R D PA N E L S I Z E
Standard stock widths are 50” (1270mm) and 62” (1575mm)
and lengths of 146” (3708mm) and 196” (4978mm). Panels are
architectural colors.
PRODUCT NOTES
stocked in 4mm thickness. Standard crate is 30 pieces. Custom
- Panels should be stored flat in a dr y, indoor environment.
lengths and thickness available. Please contact ALPOLIC Customer
- Fabricate panels at temperatures above 55°F.
Service for current available stock and additional information.
FINISH TOLERANCE
Color:
DE 2.5 max from standard
Gloss:
Nominal +/-10 units
- Protective film should be removed from panels soon after
installation.
- Please refer to ALPOLIC /fr Painted ACM Fabrication
®
Manual for routing and fabrication recommendations.
- Crating fees apply to orders for less than standard piece
crate.
- For best color consistency, ALPOLIC recommends ordering
®
PRODUCT TOLERANCE
Width:
± 0.08” (2mm)
Length:
± 0.16” (4mm)
Thickness:
4mm: ± 0.008” (0.2mm)
6mm: ± 0.012” (0.3mm)
Bow:
maximum 0.5% of length
and/or width
Squareness:
maximum 0.2” (5mm)
Peel Strength:
>22 in lb/in (ASTM D1781)
all required Mica paint finish panels at one time and
maintaining consistent panel orientation during installation.
- Different lots of Mica finish should not be mixed on building
elevation.
FOR TECHNICAL INFORMATION, PLEASE
CALL 1.800.422.7270
U . S .
H e a d q u a r t e r s
ALPOLIC material is trimmed and squared with cut
®
edges to offer the best panel edge conditions in
the industr y.
401 Volvo Parkway, Chesapeake, VA 23320
Telephone: 800- 422 -7270, Facsimile: 757- 436 -1896
www.alpolic-northamerica.com
e-mail: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement