AISM01F Quick Start Guide (English)

AISM01F Quick Start Guide (English)
Bluetooth Audio Receiver with Built-in Microphone
Quick Start Guide
Package Contents
Product Highlights
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
Multi Function
Button
Microphone
3.5mm Audio Cable
Registration Card
Connect to stereos, speaker docks and
car stereos with an AUX IN (3.5 mm)
ON / OFF and pairing
LEDs
USB Charging Cable
Product Application
3.5mm
Audio Port
Music:
Press button to play and pause
songs (Use your device to
change the volume and track)
Phone Calls:
Press button to answer, reject
hang up calls, redial last number
and cancel dialing
Smartphone*
Stream audio up
to 33 feet
Computer*
Micro USB
Charging Port
qsg Q10444
Power OFF
Operation
Operation
LED Indicators
Control Functions
Power ON
Tablet*
Copyright © 2017 Aluratek, Inc. All Rights Reserved.
Operation
Function
Charging Port Cap
model AISM01F
aluratek.com
Operation
When OFF, press and hold the multi-function button
for 3 seconds until the blue LED flashes
When ON, press and hold the multi-function button
for 5 seconds until the red LED flashes
Pairing
When OFF, press and hold the multi-function button
for 6 seconds until blue and red LED flashes
Answer Call, Hang up Call,
Cancel Dialing
Short press multi-function button
Reject Call
Press multi-function button for 1 second
Redial Last #
Short press multi-function button twice
Play / Pause Song
Short press multi-function button
Operation
Using AISM01F With Power Connected
Here are the steps to follow if you want to use AISM01F with power connected. AISM01F
will stay in standby mode as long the power is connected so your Bluetooth device can
reconnect automatically after you are within range.
1. Make sure AISM01F is turned OFF.
2. Connect the larger USB end of the cable provided to your PC / power adapter / TV’s
USB port and the smaller end to the charging port of AISM01F.
3. Follow the pairing instruction to pair your device.
Pairing
LED Indicator
Status
Solid Red LED
Charging
LED OFF
Power OFF / Fully charged if connected to a power source
Flashing Red and Blue
Pairing Mode
Flashing Red
Low battery
Flashing Blue
(Twice every 5 seconds)
Connected to a device
Flashing Blue
(Once every 5 Seconds)
Powered on but not connected with a device
Please make sure the device supports A2DP profile. The pairing procedure will vary
depending on the actual device. Please refer to the user guide of your device for detail
instruction. The general pairing procedures are as follows:
1. Make sure AISM01F is turned OFF
2. Active AISM01F pairing mode by press and hold the multi-function button for 6-7 seconds.
3. Activate your device’s Bluetooth function and set your device to search for Bluetooth
device. Select AISM01F when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED with flash twice every 5 seconds.
3.5 mm
cable
OR
Connect
to wired
headphones
and earbuds
*Bluetooth enabled
Operation
Charging The Battery
The battery is not fully charged and it is highly recommended that you charge AISM01F
before you begin using it.
Note: Using AISM01F “out of the box” will not harm the device.
You will experience reduced battery life as the unit will not be fully charged. Connect the
larger USB end of the cable provided to your PC or USB power adapter (not included)
and the smaller Micro USB to the charging port of AISM01F. Please charge the battery
for a minimum of (2) hours. When charging is complete, the blue LED will turn on.
Note: Please make sure the audio output of your device is set to Bluetooth for audio streaming.
Radio and TV Interference Statement
Warranty
Technical Support
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
E-mail: [email protected]
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement