HD/SD Video Capture Card
Advanced Graphics Display Technology
The VisionSD4+1S has five complete capture channels
The VisionSD4+1S is an ideal solution for applications that
supporting a single channel for up to 1920x1080 DVI or
require the capture of an RGB/DVI source simultaneously
2048x1536 Analog resolution, plus four SD composite or
with up to four SD video sources. Typical applications
S-video capture channels. Also supporting a SD maximum
capture resolution of 720 x576 x 16bit.
Viewing Analog or DVI sources from a PCs, MACs,
Industrial/ medical equipment, cameras and other video
Streaming video applications
Video/ Data wall controllers
The VisionSD4+1S captures the Analog/DVI data and triple
buffers it into onboard storage. This data is then copied
using DMA to the host system for display, storage or
When a Datapath graphics card is used, the VisionSD4+1S
transfers the data directly to the graphics card thereby
increasing performance. The VisionSD4+1S sends the
relevant portions of each captured image to each display
DirectShow drivers for WDM Streaming driver supports the
following applications, to encode, record and stream video
over networks or the internet:
channel and instructs each channel to use its graphics
Microsoft Media Encoder®
engine to render the data. This fully utilises the hardware
and dramatically increases performance.
Adobe Flash Encoder
Any other DirectShow encoding software
When the RGB/DVI data is displayed on a non Datapath
graphics card, the VisionSD4+1S sends the data to system
memory or direct to the graphics card, dependent on the
software used for display.
Engineering the world’s best visual solutions
Four channel SD Video + one channel RGB/DVI/HD
For streaming applications, the VisionSD4+1s can
capture card
be used with Windows Media Encoder to compress
Four Lane PCIe interface with a maximum data
rate of 650MB/sec
Maximum analog RGB capture resolution of 2048 x
1536 x 24bit
Maximum DVI capture resolution of 1920 x 1200 x
and stream captured video. To replay the video, use
Windows® Media Player.
Any application compatible with Windows® DirectShow technology can use the VisionSD4+1s due to
its built-in WDM support.
HD modes using the supplied DVI/ Component
Adapter or DVI/HDMI Adapter (HDCP not sup-
Four SD capture channels for PAL, NTSC, SECAM
(composite or S-Video inputs)
On card processor for real time mode and sync
format of the input sources and displaying the data.
Simply connect your external DVI, Analog or video
source into the card, run the VisionSD4+1S application to automatically detect the video source format
capture channels + 32 DVI-I capture channels. (32
and display the captured video in a window on your
Direct DMA driver software and streaming driver
High quality down scaling
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8
video formats
software application for configuring the timing and
Support for multiple cards allowing up to 128 SD
The VisionSD4+1S is supplied with a powerful
High performance DMA to system memory or
direct to graphics memory with scatter gather
Support for separate H/V sync, Composite sync or
A five channel PCI express card card
single pack
Sync on Green
Includes WDM streaming drivers and the Datapath
single pack, PLUS 1 x SD4-Cable, 1
Vision application software
x DVI/VGA adapter, 1 x DVI/HDMI
Fully integrated with the Datapath Wall Control
adapter and 1 x VI/ component
software for video wall applications.
Support for Windows® XP/Vista/Server 2003/
Server 2008/Windows® 7/Windows 10
A five channel PCI express card
Datapath SDK included for software developers
All products are shipped with the latest software
available, unless stated otherwise.
Special requirements may be organised by contacting
our Sales team.
Board Format
PCI-e x4 plug-in card, 110mm x 204mm.
PCI-e bus master with scatter gather DMA providing maximum data rate of
One DVI-I type connector and one D connector for SD inputs
Maximum Sample Rate
170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video: 16bits per pixel/YUV format
SD Maximum Capture Resolution
Video Capture Memory
64 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536,
custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200,
and custom modes.
HD Modes
1080p, 1080i, 720p, 576p, 576i, 480p and 480i using the supplied DVI/ Component
Adapter or DVI/HDMI Adapter (HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Output Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2.
Update Rate
User defined, captured frame rate will match the source providing max data rate
(650MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green/YPbPr (3 wire).
DVI Single Link.
PAL, NTSC, SECAM in composite or S-Video format for SD inputs
Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008
and Windows® 7.
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 1.2A.
Max power – 15 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions,
therefore the specification may change from time to time. | [email protected] | +44 (0) 1332 294441
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF