Datapath VisionRGB-X
Datapath
VisionRGB-X
Dual Channel RGB/DVI
Capture Card
Advanced Graphics Display Technology
•
Half size 64 bit PCI-X Card.
•
Dual Channel real-time Analog or DVI capture with high
speed 500MB/s DMA transfer.
•
Capture resolutions up to 1920x1080 Analog or
1600x1200 DVI.
•
Support for non-interlace video sources.
•
On board processor providing auto-sync and capture
mode detection.
•
32MB per channel DDR capture memory.
•
Software compatible with the VisionRGB-PRO product
range.
•
Includes WDM streaming drivers and the Datapath
VisionRGB application software.
•
Fully integrated with the Datapath Wall Control
software for video wall applications.
•
VisionRGB-X is also optimised for operation with the
Datapath range of graphics cards.
•
Support for multiple cards allowing up to 64 capture
channels. (32 cards)
•
Support for Windows XP/ Server 2003.
•
Datapath SDK included for software developers.
The VisionRGB-X is an ideal solution for applications that require the capture of Analog or DVI sources in real
time. Typical applications include:
•
Viewing Analog or DVI sources from PCs, MACs, Industrial/medical equipment, cameras and other
video equipment.
•
Recording Analog or DVI video sources.
•
Streaming video applications.
•
Video/Data Wall Controllers.
Datapath
VisionRGB-X
Dual Channel RGB/DVI
Capture Card
RGB Streaming
For streaming applications, the VisionRGB-X can be used with Windows Media Encoder to compress and
stream captured video. To replay the video, use Windows® Media Player.
Any application compatible with Windows DirectShow technology can use the VisionRGB-X due to its
built-in WDM support.
VisionRGB Software:
The VisionRGB-X is supplied with a powerful software application for configuring the timing and format of
the input sources and displaying the data. Simply connect your external DVI or Analog source into the
card, run the VisionRGB-X application to automatically detect the video source format and display the
captured video in a window on your desktop. You can also use the software application to record and
capture the Analog data at high frame rates and play it back using the Datapath VisionRecorder and
VisionPlayer applications.
Hardware Overview:
The VisionRGB-X has two complete capture channels, each supporting up to 1600 x 1200 DVI or
1920x1080 Analog resolution.
The VisionRGB-X captures the Analog/DVI data and triple buffers it into onboard storage. This data is
then copied using DMA to the host system for display, storage or streaming.
Whenever the RGB/DVI data is displayed on a non Datapath graphics card, the VisionRGB-X sends the
data to system memory, after which, the operating system copies the data to the display. When a
Datapath graphics card is used, the VisionRGB-X transfers the data directly to the graphics card thereby
increasing performance.
The VisionRGB-X sends portions of the captured data to each video channel and instructs each channel to
use its graphics engine to update the data. This utilises the hardware and dramatically increases
performance.
Typical up date rates when used with the Datapath Vantage4 graphics card are:
1 channel at 1280 x 1024
-
60Hz.
1 channel at 1024 x 768
-
75Hz.
Models
VisionRGB-X - A dual channel PCI-X capture card.
Datapath
VisionRGB-X
Dual Channel RGB/DVI
Capture Card
Specifications:
•
Board Format:
64 bit, up to 133MHz PCI-X, half size plug-in card 105mm x 170mm.
PCI Bus Master with scatter/gather DMA providing up to 1GB/sec peak,
500MB/sec sustained
•
Connectors:
Two DVI-I Type connectors
•
Maximum Sample Rate:
170 Mpixels per second RGB or 165MHz DVI.
•
Video Sampling:
RGB: 24 bits per pixel/8-8-8 format.
•
Video Capture Memory:
32MB per channel (updated in real time). Triple buffered.
•
Analog RGB Mode
Support:
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080,
Custom modes.
•
DVI Single Link Mode
Support:
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, Custom
modes.
•
Input Mode Detection:
Automatic detection of input modes in hardware, enabling the tracking of
mode changes in the source signal.
•
Pixel Output Formats:
RGB: 5-5-5, 5-6-5 or 8-8-8 pixels.
YUV 4:2:2: UYVY, YUY2, YVYU.
MONO: 8bit
•
Update Rate:
User defined, typically up to 60 frames per second, limited by available
PCI bandwidth.
Multi-buffered to eliminate tearing artifacts
•
Video Format Options:
Analog RGB plus HSync and VSync (5 wire). )
Analog RGB with Composite Sync (4 wire). )Analog RGB with Sync on Green (3 wire).
)
Progressive
DVI Single Link.
•
Operating System
Support
Windows® XP, Windows® Vista and Windows® Server 2003.
•
Power Requirements:
Max current at +3.3V - 1A
Max current at +5V - 1A
Max power - 8 Watts
•
Operating Temperature:
0 to 35 deg C.
•
Storage Temperature:
-20 to 70 deg C.
•
Relative Humidity
5% to 90% non-condensing.
Datapath
VisionRGB-X
Dual Channel RGB/DVI
Capture Card
For details on how to purchase the VisionRGB-X products contact our sales department
sales@datapath.co.uk
Datapath Limited
Alfeton Road, Derby, DE21 4AD, England
Tel: +44 (0) 1332 294441
Fax: +44 (0) 1332 290667
Email: sales@datapath.co.uk
Web: www.datapath.co.uk
Datapath France
7 Rue des Pinsons, 78990 Elancourt,
France
Tel: (+33) 130138934
Fax: (+33) 130138935
Email: datapathfrance@sqynet.com
Datapath Germany
Friedrich-Ebert Straße 21
D-64846 Groß-Zimmern,Germany
Tel: (+49) 06071 96300
Fax: (+49) 06071 963020
Web: http://www.datapath.de/
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising