diagram #7030 - Perfect Switch, LLC
Nippon Denso Toyota Oval Plug
'93-'97 Land Cruiser
DIAGRAM #7030
Regulator F540
Plug 46-2809
Plug W145-35
Seal 41-82303
Terminal Block 46-82201
Brush Assembly 39-8202
Rear Cover 46-82451
TO BACK OF
ALTERNATOR
In a standard configuration,
the plug will be inserted
in round receptacle on the back
of the alternator.
The 10-pin BYPASS plug will get
tucked out of the way of moving
parts.
L
IG
FROM ORIGINAL
ALTERNATOR HARNESS
In a BYPASS configuration,
remove 10-pin harness plug and
join with 10-pin BYPASS plug.
Remove #4 red & yellow
cables and join together on bolt
provided in BYPASS Kit.
blue
IN-LINE FUSE
Alternator Warning Light (L)
Ignition (IG - Keyed 12v)
Sense (S --not used)
IN-LINE FUSE
Green
ORIGINAL ALTERNATOR
OUTPUT CABLE NOT USED
S
yellow
yellow
NOTE: Not all wires from the 10-pin
harness will be used.
BLUE PIN 1 (ONE)
10-Pin Bypass
grey
10-Pin Harness
black
alternator
output post
yellow
pin 9 (nine)
violet
grey
white - pin 10 (ten)
HARNESS
MODE SELECT
ground
MOBILE WELDING & POWER, INC.
www. mobi-arc.com
PATENT PENDING
MADE IN U.S.A.
BATTERY +
white
ALTERNATOR
BAT GND
I A S F
ground
+ _
BATTERY
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement