POWER CRAFT PBH-1500 Rotary Hammer User Guide & Warranty

The POWER CRAFT PBH-1500 Rotary Hammer is a powerful tool designed for drilling holes in masonry materials like brick and concrete. It can also be used for demolition tasks in combination with the SDS cold chisels provided. The PBH-1500 comes with a 3-year warranty and offers various features for safe and efficient operation.

PDF Download
Document
POWER CRAFT PBH-1500 Rotary Hammer User Guide & Warranty | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 1500W Power Rating
  • SDS Plus Chuck
  • Variable Speed Control
  • Depth Gauge
  • Auxiliary Handle (360° rotatable)
  • Dust Catcher
  • 3-year Warranty
  • Safety Button (lock-off)
  • Impact Rate: 0-3900/min

Frequently asked questions

The PBH-1500 is designed for drilling holes in masonry materials such as brick, concrete, and similar materials. It can also be used as a demolition hammer with the SDS cold chisels provided.

No, the PBH-1500 is not suitable for construction site usage.

To exchange or remove drill bits, first unplug the device. Slide the locking sleeve to the rear, insert the bit into the chuck, and turn it until it clicks into place. Release the sleeve. To remove the bit, slide and hold the locking sleeve to the rear.

The maximum bit diameter for concrete is Ø 32 mm, for steel is Ø 13 mm, and for wood is Ø 40mm.

The impact rate of the PBH-1500 is 0-3900/min.

You can adjust the speed using the turning wheel in the main handle. Higher numbers indicate faster speeds. However, avoid running the machine at a low speed for extended periods, as this can cause overheating.
Preparing document for printing…
0%