Nova Tb® dimmers, switches and fan controls

Nova Tb® dimmers, switches and fan controls
Nova Tb dimmers, switches and fan controls
®
2.75 in (70 mm)
Product family features
Full family of controls plus matching fan controls,
switches and wiring devices
•
Exclusive dimmer/switch size opening
•
Slide adjusts light to suit any activity
•
Classic slider, thin profile design
•
Voltage compensation maintains stable light
levels, despite line voltage variations
•
4.56 in (116 mm)
Architectural
wallplate opening
Mechanical air-gap to disconnect load power
•
100% factory tested
•
Coordinating wallplate included with
Architectural matte finish controls, metal
wallplates only available separately
•
Custom engraving and custom coloring
available for wallplates, see pg. 155
•
Control types
.30 in
(7.6 mm)
profile
Shown actual size: Nova Tb
dimmer in Black (BL) with 1-gang
Architectural wallplate in Clear
Anodized Aluminum (CLA).
Single-pole (one location)
3-way or 4-way (two or more locations)
Two-location dimming only (OmnislideTM)
Direct load type compatibility
Incandescent/halogen lighting
Magnetic low-voltage lighting
Electronic low-voltage lighting
Fluorescent lighting
LED lighting
Ceiling fans
Motorized window treatments (AC)
Load types requiring load interface
Neon/cold cathode lighting
Lighting load interfaces may be applicable
for some additional load type, voltage and
capacity combinations.
For additional information, see pg. 174.
www.lutron.com | 1.800.523.9466 |
26
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Available finishes
Use BOLD color code in model number (Example: NT-600-SI)
Architectural matte finishes*
WH
White
LA
Light Almond
AL
Almond
BE
Beige
GR
Gray
SI
Sienna
BR
Brown
BL
Black
IV
Ivory
TP
Taupe
QZ
Antique Bronze
Architectural metal finish wallplates**
BN
Bright Nickel
BC
CLA
SC
Bright Chrome Clear Anodized Satin Chrome
Aluminum
SN
Satin Nickel
AU
Gold Plated
BB
Bright Brass
QB
BLA
Antique Brass Black Anodized
Aluminum
BRA
SB
Brass Anodized Satin Brass
Aluminum
*Coordinating wallplate included with Architectural matte controls.
**Metal finish wallplates only available separately and include black plastic trim/adapter, visible from side.
Match with separate Black (BL) controls. For wallplate information, see pg. 152.
www.lutron.com | 1.800.523.9466 |
27
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Dimmers
Switches and fan controls
Slide-to-off dimmers/single-pole
Linear-slide switches
•
Slide up to brighten; down to dim
•
Standard size dimmer shown
•
Higher capacity loads require
large controls, see below
Preset dimmers/3-way
Slide-to-off fan controls
•
Button turns on/off to slider level
•
Slide up to brighten; down to dim
•
Slide up to on; down to off
•
Slide up to increase speed/on;
down to decrease speed/off
•
Quiet 3-speed available for use
with one paddle fan, or fully
variable available for use with
multiple paddle or exhaust fans
Higher capacity loads require
large controls, see below
•
•
•
Quiet 3-speed model designed
to prevent motor hum
Higher capacity loads require
large controls, see below
Omnislide two-location slide-to-off dimmers
•
Slide up to brighten; down to dim
•
Provides true dimming from
both locations
Large Control
Higher capacity dimmers require
larger heat sink behind wallplate
•
Large controls available as preset
dimmer, slide-to-off dimmer or
fan control
•
www.lutron.com | 1.800.523.9466 |
Large control measures 4.56 in x 4.56 in
•
Requires large wallplate
•
Most can fit in a 1-gang
electrical backbox
•
28
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Connections overview
Load connections*
Incandescent/
Halogen
Magnetic
Low-Voltage
Electronic
Low-Voltage
MLV
Transformer
(by others)
Incandescent/
Halogen
Dimmer
MLV
Dimmer
ELV
Transformer
(by others)
ELV
Dimmer
Fluorescent
Lighting
Lutron ®
Dimming
Ballasts
Fluorescent
Dimmer
Switched
Ceiling
Lighting/Fans Fan
LED
AC Motorized
Window
Treatment
Lutron Hi-lume ®
LED Driver
Fluorescent
Dimmer
(3-wire only)
Switch
Fan
Control
Double Pole/
Double Throw
Switch
Control types (for 2 or more locations)
Dim from two locations (Incandescent/halogen only)
Dim from one location, switch from the others
Light
Source
Light
Source
3-way
Dimmer
Light
Source
3-way
Dimmer
Omnislide
Two Location
Dimmer
Omnislide
Companion
Dimmer
3-way
Switch
4-way
Switch
(1 or more)
3-way
Switch
For more information on ballasts, visit www.lutron.com/ballasts.
For more information on LED drivers, visit www.lutron.com/LED.
*For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
29
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Dimmer model numbers
Incandescent/halogen dimmers
(small and large controls)
Magnetic low-voltage dimmers
(small and large controls)
Slide-to-off dimmers
Slide-to-off dimmers
Single-pole (small)
120 V 600 W
Single-pole (small)
120 V 1000 W
Single-pole (large)
120 V 1500 W
Single-pole (large)
120 V 1920 W
NT-600-AA
2
NT-1000-AA 2
NT-1500-AA 2
NT-2000-AA 2
NT-2000 dimmers must be ganged with no fins
broken. See ganging and derating on pg. 170 for
further information.
NT-2000 requires a 2-gang electrical backbox.
Omnislide two-location slide-to-off dimmers
Base unit (small)
NTB-600-AA 2
120 V 600 W
Base unit (small)
NTB-1000-AA 2
120 V 1000 W
Auxiliary unit (use with base unit)
NTA-2-AA 2
For two-location incandescent/halogen dimming,
use one base unit (NTB-600- or NTB-1000-) with
one auxiliary unit (NTA-2-).
Preset dimmers
3-way/single-pole (small)
120 V 600 W
3-way/single-pole (small)
120 V 1000 W
3-way/single-pole (large)
120 V 1500 W
Single-pole (small)
120 V 600 VA (450 W)
Single-pole (small)
120 V 1000 VA (800 W)
Single-pole (small)*
277 V 600 VA (450 W)
Single-pole (small)*
277 V 1000 VA (800 W)
Single-pole (large)
1500 VA (1200 W)
NTLV-600-AA 2
NTLV-1000-AA 2
NTLV-600-277-AA 2
NTLV-1000-277-AA 2
NTLV-1500-AA 2
Preset dimmers
3-way/single-pole (small)
120 V 600 VA (450 W)
3-way/single-pole (small)
120 V 1000 VA (800 W)
3-way/single-pole (large)
120 V 1500 VA (1200 W)
NTLV-603P-AA 2
NTLV-1003P-AA 2
NTLV-1503P-AA 2
The stated VA (Volt-Ampere) rating includes
the magnetic transformer heat losses and the
lamp load. The stated W (Watt) rating is the
maximum lamp wattage based on assumed
20% transformer loss.
NT-603P-AA 2
NT-1003P-AA 2
NT-1503P-AA 2
AA 2:Architectural matte color codes, see pg. 27
(1-gang wallplate included)
www.lutron.com | 1.800.523.9466 |
All models must be derated in standard
ganging unless otherwise noted, see pg. 170.
*Requires neutral wire connection.
30
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Dimmer model numbers
Electronic low-voltage dimmers*
(small controls)
Slide-to-off dimmer
Slide-to-off dimmers
Single-pole
120 V 300 W
Single-pole
120 V 600 W
NTELV-300-AA
Single-pole
30 mA max control current
2
NTELV-600-AA 2
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For information on using Lutron dimmers to
control: Advance Mark VII dimming ballasts, visit
www.lutron.com/advance; Universal dimming
ballasts, visit www.lutron.com/universal.
3-wire fluorescent dimmers*
(small control)
Slide-to-off dimmers
Single-pole
120 V 16 A
Single-pole
277 V 8 A
NTF-10-AA 2
NTF-103P-AA 2
NTF-103P-277-AA 2
For use with Hi-lume®, Hi-lume® Compact SE,
Hi-lume® 3D, Eco-10®, EcoSystem® ballasts.
Also compatible with Hi-lume® LED driver.
No derating required if ganged.
Adjustable low-end trim.
No derating required if ganged.
NTF-10-277-AA 2
Preset dimmers
3-way
120 V 8A
3-way
277 V 6A
NTFTV-AA 2
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Only certain LED drivers are dimmable using
an ELV dimmer, for more information visit
www.lutron.com/LED.
0-10 V dimmer (current sink control)
(small controls)
AA 2:Architectural matte color codes, see pg. 27
(1-gang wallplate included)
www.lutron.com | 1.800.523.9466 |
Tu-Wire® fluorescent dimmers
(small controls)
Slide-to-off dimmers
Single-pole
120 V 5 A
Single-pole*
277 V 5 A
NTFTU-5A-AA 2
NTFTU-5A-277-AA 2
Also compatible with Advance Mark X
ballasts, for further information visit
www.lutron.com/advance.
For information on use with Universal and
OSRAM ballasts, contact Technical Support
at 1.800.523.9466.
For more information on Lutron ballasts, visit
www.lutron.com/ballasts.
All models must be derated if ganged unless
otherwise noted, see pg. 170.
*Requires neutral wire connection.
31
Architectural
wallplate opening
Nova Tb dimmers, switches and fan controls
®
Dimmer model numbers
Fan control and switch model numbers
Hi-lume® LED drivers:
3-wire fluorescent dimmers*
(small controls)
Fan controls
(small and large controls)
Slide-to-off fan control—quiet 3-speed
Slide-to-off dimmers
Single-pole
120 V 16 A
Single-pole
277 V 8 A
NTF-10-AA
Single-pole fan control (small)
120 V 1.5 A
2
For use with only one ceiling fan.
No derating required if ganged.
NTF-10-277-AA 2
Slide-to-off fan controls—fully variable
Preset dimmers
3-way/single-pole
120 V 8 A
3-way/single-pole
277 V 6 A
NTFSQ-AA 2
NTF-103P-AA
Single-pole fan control (small)
120 V 6 A
Single-pole fan control (large)
120 V 12 A
2
NTF-103P-277-AA 2
Exclusively compatible with Hi-lume LED driver.
For more information on Hi-lume LED drivers,
visit www.lutron.com/HilumeLED.
To control lights from multiple-locations, use
3-way dimmer with NT-3PS- and NT-4PS- or
other mechanical switches.
NTFS-6E-AA 2
NTFS-12E-AA 2
Switches
(small controls)
General purpose switches—all load types
Single-pole
120/277 V 20 A
NT-1PS-AA 2
3-way
120/277 V 20 A
NT-3PS-AA 2
Adjustable low-end trim.
4-way
120/277 V 20 A
NT-4PS-AA 2
-10 V LED drivers:
0
0-10 V dimmers (current sink control)
(small controls)
Momentary contact
120/277 V 30 A;
2 HP @ 120/240 VAC
NT-DPDT-CO-MO-AA 2
Slide-to-off dimmer
Maintained contact
120/277 V 15 A;
1/2 HP @ 120 VAC;
2 HP @ 240 VAC
NT-DPDT-CO-MA-AA 2
No derating required if ganged.
Single-pole
30 mA max control current
NTFTV-AA 2
Control provides dimming signal only. For
dimming with on/off switching, use with Lutron
PowerPack: PP-120H, PP-277H or PP-347H.
Consult ballast manufacturer for specific ballast
current draw to determine maximum number of
ballasts per control.
For 3-way and 4-way switching, use NT-3PS-,
NT-4PS- or other mechanical switches.
No derating required if ganged.
For compatible 0-10 V LED drivers by others, visit
www.lutron.com/LED.
No derating required if ganged.
AA 2:Architectural matte color codes, see pg. 27
(1-gang wallplate included)
www.lutron.com | 1.800.523.9466 |
All models must be derated in standard
ganging unless otherwise noted, see pg. 170.
*Requires neutral wire connection.
32
Nova Tb dimmers, switches and fan controls
®
Accessories
Wallplates
4.56 in (116 mm)
Shown actual size: 2-gang
Architectural wallplate in
White (WH).
For more information
about Architectural wallplates,
see pg. 152.
4.56 in (116 mm)
Architectural
wallplate opening
.30 in
(7.6 mm)
profile
Coordinated electrical devices
For more information
about coordinated
Architectural electrical
devices, see pg. 156.
Tamper resistant
GFCI receptacle
Customizable
6-port frame
www.lutron.com | 1.800.523.9466 |
Cable jack
33
4.56 in (116 mm)
Shown actual size:
Nova Tb dimmers and
2-gang Architectural
wallplate in White (WH).
4.56 in (116 mm)
Wallplates and accessories | Architectural
.30 in
(7.6 mm)
profile
Product family features
Can be used in conjunction with the following
dimmer(s) and switch(es): Vareo®, Nova Tb®
•
All Lutron® wallplates are screwless, seamless and
have no visible hardware, the front plate securely
snaps into the alignment adapter plate
•
Customize your architectural wallplate with
engraving or by adding a corporate logo,
contact customer service to get started at
1.888.LUTRON1
•
Matte finish wallplates can be custom colored
to perfectly match a paint color number, swatch
or sample
•
www.lutron.com | 1.800.523.9466 |
Ganging and derating
Architectural wallplates in this section use
standard ganging
•
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging),
see pg. 170
•
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pg. 173
•
Custom multi-gang wallplates required for the
following cases
-Full-capacity ganging ("No Fins Broken")
-Large Nova Tb controls (1500/2000 W)
-Nova controls
For further information visit
www.lutron.com/customganging.
•
152
Wallplates and accessories | Architectural
Available finishes
Use BOLD color code in model number (Example: VWP-1-SI)
Architectural matte finishes
WH
White
LA
Light Almond
AL
Almond
BE
Beige
GR
Gray
SI
Sienna
BR
Brown
BL
Black
IV
Ivory
TP
Taupe
QZ
Antique Bronze
Architectural metal finishes*
BN
Bright Nickel
BC
CLA
SC
Bright Chrome Clear Anodized Satin Chrome
Aluminum
SN
Satin Nickel
AU
Gold Plated
BB
Bright Brass
QB
BLA
Antique Brass Black Anodized
Aluminum
BRA
SB
Brass Anodized Satin Brass
Aluminum
*Metal finish wallplates include black plastic trim/adapter, visible from side. Match with separate
Black (BL) or Midnight (MN) controls.
www.lutron.com | 1.800.523.9466 |
153
Wallplates and accessories | Architectural
Wallplates for Vareo® and Nova Tb®
dimmers and architectural accessories
1-gang for one switch or dimmer*
W: 2.75 in (70 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
VWP-1-AA1
1-gang for one accessory*
VWP-R-AA1
W: 2.75 in (70 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
2-gang*
VWP-2-AA2
for two dimmers or switches
W: 4.56 in (116 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
2-gang*
VWP-2R-AA2
for two accessories
W: 4.56 in (116 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
3-gang*
VWP-3-AA2
for three switches or dimmers
W: 6.32 in (161 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
4-gang*
for four switches or dimmers
VWP-4-AA 2
W: 8.45 in (215 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
AA1:Architectural matte and Architectural
metal color codes, see pg. 153
2
AA :Architectural matte color codes,
see pg. 153
For metal finishes, contact Customer
Service at 1.800.LUTRON1.
www.lutron.com | 1.800.523.9466 |
Multi-gang dimmer installations may require
derating, see pg. 170.
*Metal finish wallplates include black plastic trim/
adapter, visible from side. Match with separate
Black (BL) controls.
154
Wallplates and accessories | Architectural
Custom Architectural wallplates
Custom configurations, colors, engraving and
silkscreenings available. Contact customer
service 1.888.LUTRON1.
2-gang*
VWP-2CR-AA2
for one dimmer or switch and one accessory
W: 4.56 in (116 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
2-gang*
VWP-2RC-AA2
for one accessory and one dimmer or switch
W: 4.56 in (116 mm); H: 4.56 in (116 mm);
D: .30 in (7.6 mm)
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
Custom multi-gang wallplates required for the
following cases:
• Multi-gang metal finishes
• Full-capacity ganging ("No Fins Broken")
• Large Nova Tb controls (1500/2000 W)
• Nova controls
For further information, visit
www.lutron.com/customganging.
4-5
0256
ve
Mau
4-4
urple
0256
tic P
Majes
4-3
0256
low
Lily G
Custom coloring available for all Architectural
matte finish wallplates.
AA 2:Architectural matte color codes,
see pg. 153
For metal finishes, contact Customer
Service at 1.800.LUTRON1.
Multi-gang dimmer installations may require
derating, see pg. 170.
Custom engraving available for all Traditional,
Designer, Architectural and New Architectural
style wallplates (except Stainless Steel).
For wallplate engraving schedules,
go to www.lutron.com/engraving.
*Metal finish wallplates include black plastic trim/
adapter, visible from side. Match with separate
Black (BL) controls.
www.lutron.com | 1.800.523.9466 |
155
Wallplates and accessories | Architectural
Cable jack
Double and triple telephone jacks
F-style, 75-Ohm
coaxial cable
8-conductor jack, RJ45 category 5
phone jack
•
•
Includes 1-gang wallplate
Includes 1-gang wallplate
•
Single cable jack*
NT-CJ-AA2
Telephone jack
•
Double telephone jack* †
NT-PJ8X2-AA2
Triple telephone jack* †
NT-PJ8X3-AA2
Telephone/cable jack
6-conductor jack, RJ11
•
Includes 1-gang wallplate
8-conductor jack, RJ45 category 5
phone jack
•
•
F-style, 75-Ohm coaxial cable jack
•
Includes 1-gang wallplate
•
Single telephone jack* NT-PJ-AA2
Telephone/cable jack* †
NT-PJ8CJ-AA2
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
*Metal finishes are only available as separate
wallplates. Match with separate Black (BL)
controls and accessories.
†Ivory, White, Beige and Taupe controls will ship
with White coordinating jacks; Brown, Black,
Gray and Metal finish controls will ship with
Black coordinating jacks.
AA2:Architectural matte color codes, see pg. 153
(1-gang wallplate included)
www.lutron.com | 1.800.523.9466 |
156
Wallplates and accessories | Architectural
Isolated ground receptacles
Receptacles
Includes 1-gang wallplate
Receptacle is orange
for easy ID and circuit delineation
•
•
Wallplate will match color that
is ordered
•
Includes 1-gang wallplate
•
Tamper resistant receptacles
15 A, 125 V*
NTR-15-TR-AA
20 A, 125 V*
NTR-20-TR-AA
2
2
15 A, 125 V*
NTR-15-IG-OR-AA2
20 A, 125 V*
NTR-20-IG-OR-AA2
GFCI receptacles
Press test button to confirm
LED indicator status
•
Press reset button to reset
GFCI after circuit interruption
•
Includes 1-gang wallplate
•
Tamper resistant GFCI receptacles
15 A, 125 V*
NTR-15-GFTR-AA2
20 A, 125 V*
NTR-20-GFTR-AA2
AA :Architectural matte color codes, see pg. 153
(1-gang wallplate included)
2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate
wallplates. Match with separate Black (BL)
controls and accessories.
157
Wallplates and accessories | Architectural
Receptacles for dimming use
Receptacles for dimming use
Duplex for dimming both
connected loads
Duplex for dimming both
connected loads
•
•
Projecting nubs prevent standard
plugs from being used
Projecting nubs prevent standard
plugs from being used
•
•
Requires replacement plugs for
dimming use
Requires replacement plugs for
dimming use
•
•
15 A model shown
•
15 A model shown
Includes 1-gang wallplate
•
•
Includes 1-gang wallplate
•
Tamper resistant
shutter mechanism
Duplex for dimming use
•
15 A
120/125 V*
NTR-15-DFDU-AA2
20 A
120/125 V*
NTR-20-DFDU-AA2
Receptacles for dimming use
Top half for dimming
•
Projecting nub prevents standard
plug from being used
•
Dual dimming tamper resistant
15 A
120/125 V*
NTR-15-DDTR-AA2
20 A
120/125 V*
NTR-20-DDTR-AA2
Receptacles for dimming use
Top half for dimming
•
Projecting nub prevents standard
plug from being used
Requires replacement plugs for
dimming use
•
Bottom half is a general use
receptacle and will fit standard
duplex plugs
•
•
Requires replacement plugs for
dimming use
•
Bottom half is a general use
receptacle and will fit standard
duplex plugs
•
15 A model shown
•
Includes 1-gang wallplate
•
15 A model shown
•
Split duplex (half for dimming use)
15 A
120/125 V*
NTR-15-HFDU-AA2
20 A
120/125 V*
NTR-20-HFDU-AA2
Includes 1-gang wallplate
•
Tamper resistant
shutter mechanism
•
Half dimming tamper resistant
15 A
120/125 V*
NTR-15-HDTR-AA2 
20 A
120/125 V*
NTR-20-HDTR-AA2
AA :Architectural matte color codes, see pg. 153
(1-gang wallplate included)
2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate
wallplates. Match with separate Black (BL)
controls and accessories.
158
Wallplates and accessories | Architectural
Replacement plugs for dimming
(use with receptacles)
This plug required for use with
Lutron® receptacles for dimming
use—plug will work in standard
receptacle
•
Easily replaces the existing plugs
on lamps
•
120/125 V
White
RP-FDU-10-WH
120/125 V
Brown
RP-FDU-10-BR
UL/CSA/NOM regulatory approvals
Important application notes:
Receptacles and plugs for dimming use are UL
listed for use with all Lutron wallbox dimmers
included in this catalog
•
If there is only one electrical feed to the receptacle,
then the duplex DFDU must be used
•
If the hot and dimmed hot feeds to the split
duplex HFDU are supplied from different circuits
or split-wired, with separate switch-legs, a means
to simultaneously disconnect these circuits must
be provided at the panel board where they
originate (NEC 210.7(C) 2002 Edition). A 2-pole
circuit breaker or two single-pole circuit breakers
with an approved handle tie can be used to
accomplish this simultaneous disconnect. Feedthrough dimming panels, which are those without
breakers, are recommended when using the HFDU.
•
For detailed information, see Application Notes #91
(Guide to Dimming Table Lamps) and #109 (Guide
to Dimming Portable Lamps via Receptacles) at
www.lutron.com/applicationnotes
•
AA :Architectural matte color codes, see pg. 153
(1-gang wallplate included)
2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate
wallplates. Match with separate Black (BL)
controls and accessories.
158A
Wallplates and accessories | Architectural
Field customizable 6-port frame
Shipped with six blanks in
matching colors
•
Connectors sold separately
•
Connectors snap in
(no tools required)
•
Includes 1-gang wallplate
Multiple devices with line and low-voltage can
be mounted behind a common wallplate using
a standard barrier backbox, see Application
Note #213 (Combining Low-Voltage and Line
Voltage Wiring Devices in a Multi-Gang Box) at
www.lutron.com/applicationnotes.
•
Connectors available in White (WH)
only unless noted
•
6-port frame*
NT-6PF-AA2
Connectors for 6-port frame
Telephone/network jacks
8-conductor,
RJ45 category 3
CON-1P-C3-EE4
8-conductor,
RJ45 category 5e
CON-1P-C5E-EE4
8-conductor, RJ45 category 6
CON-1P-C6-EE4
Fiber jacks
MT-RJ feed through
CON-1F-MTRJ-WH
SC simplex
CON-1F-SC-WH
LC non-flush mount
CON-1F-LC-WH
ST style
CON-1F-ST-WH
Cable jack
F-style, 75-Ohm coaxial cable
BNC jack
BNC connector, 50-Ohm CON-1C-EE4
CON-1B-WH
Connectors only for use with 6-port frame.
AA :Architectural matte color codes, see pg. 153
EE 4:Only available in White (WH) and Black (BL)
2
www.lutron.com | 1.800.523.9466 |
*Metal finishes are only available as separate
wallplates. Match with separate Black (BL)
controls and accessories.
159
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
How to understand ganging and derating
Standard ganging
Ganging is the side-by-side mounting of two
or more dimmers or accessory devices under
a multi-gang wallplate.
Standard multi-gang installation:
•
Uses standard multi-gang electrical backboxes
•
Uses standard multi-gang wallplates
•
•
Requires fins to be removed from dimmers for
proper spacing (“Fins Broken” ganging)
May require derating (i.e., reduction of dimmer
capacity due to fin removal), see Derating
Tables, pgs. 172–173
Custom ganging for Architectural
style controls
For Architectural style dimmers and switches,
it is possible to retain the maximum capacity of
dimmers in multi-gang applications via custom
architectural multi-gang:
•
•
•
•
•
May require customized, wider-thanstandard wallplates
May require wider-than-standard
electrical backboxes
Allows full capacity (“No Fins Broken”) ganging
Required for Nova® dimmers and for larger width
(high capacity) architectural controls
Visit www.lutron.com/customganging for
additional information
Standard ganging for dimmers, switches and accessories
New Architectural
Architectural
Designer
Traditional
pg. 148
pg. 152
pg. 160
pg. 166
Vierti®
Vareo®
Nova Tb®
Maestro®
Maestro IR®
Maestro Wireless®
Spacer System®
Diva®
Lyneo® Lx
Skylark®
Skylark ContourTM
Abella®
Ceana®
Ariadni®
Glyder®
Rotary
Derating Table 1
pg. 172
Derating Table 2
pg. 173
Derating Table 1
pg. 172
Derating Table 1
pg. 172
www.lutron.com | 1.800.523.9466 |
170
Appendix | Ganging and derating
Standard ganging and fins broken derating examples:
=
+
No fins broken
Full capacity
One Nova Tb®
dimmer
=
Standard 1-gang
backbox
+
=
Three Nova Tb dimmers
“Fins Broken” ganging
Standard 1-gang
architectural wallplate
+
Standard 2-gang
backbox
One fin broken*
Partial derating
Two Nova Tb dimmers
“Fins Broken” ganging
+
+
Standard 2-gang
architectural wallplate
+
Standard 3-gang
backbox
Inside: Two fins broken*
Full derating
Standard 3-gang
architectural wallplate
Outside: One fin broken*
Partial derating
Custom Architectural ganging example:
=
Two Nova Tb dimmers
“No Fins Broken” ganging
+
+
No fins broken
Full capacity
Backbox with
chase nipple
Custom architectural
wallplate
For further information on ganging and derating, visit www.lutron.com/multigang.
*The fins are scored and designed to be removed easily.
www.lutron.com | 1.800.523.9466 |
171
Appendix
| Multi-ganging
derating
Appendix
| Ganging andand
derating
Derating Table 1
New Architectural | Vierti®
Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark®
Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W
600 W
450 W
500 W
400 W
400 W
Incandescent
Dimmers
Dual dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni
Tu-Wire®: Spacer System, Diva, Skylark
Fan controls
Fully variable
Fan/light controls
Fully variable
Electronic switches
www.lutron.com | 1.800.523.9466 |
172
Appendix
and derating
Appendix| |Multi-ganging
Ganging and derating
Derating Table 2
Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent
Dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vareo
Nova Tb
0-10 VDC control1
Tu-Wire®
Fan controls
Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching.
VETS-R-Auxiliary electronic tapswitches do not require derating.
1
2
www.lutron.com | 1.800.523.9466 |
173
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Vierti®*
pg. 14
capacity†
Incandescent/halogen 120 V Magnetic low-voltage 120 V
Vareo®
pg. 20
Nova Tb® Nova®
pg. 34
pg. 26
Centurion®
pg. 42
M
600 W
M
1000 W
M
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
WBX
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
3F
Hi-lume, Hi-lume Compact SE,
8 A
3F
16 A
3F
5 A
PA
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
16 A
TVI
3F
3F
TVI
T VI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
*Consult Lutron Technical Support for information on interfaces with Vierti.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
174
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Maestro® Maestro Maestro Spacer
pg. 46
IR® pg. 60 Wireless® System®
pg. 68
pg. 76
capacity†
M
600 W
E
Incandescent/halogen 120 V M
M
Diva®
pg. 86
M
E
1000 W
1500 W
WBX
WBX
WBX
WBX
2000 W
WBX
WBX
WBX
WBX
1500 VA (1200 W)
WBX
WBX
WBX
WBX
2000 VA (1600 W)
WBX
WBX
WBX
WBX
600 VA (450 W)
WBX
WBX
WBX
WBX
1000 VA (800 W)
WBX
WBX
WBX
WBX
Magnetic low-voltage 120 V
600 VA (450 W)
1000 VA (800 W)
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
WBX
450 W
WBX
WBX
600 W
WBX
WBX
16 A
WBX
Neon/cold cathode
WBX
WBX
WBX
WBX
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8 A
3F
3F
3F
16 A
3F
3F
3F
3F
8 A
3F
3F
3F
3F
16 A
3F
3F
3F
3F
5 A
PA
PA
16 A
TVI
TVI
TVI
TVI
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
T VI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
175
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Lyneo® Lx Skylark
pg. 94
ContourTM
pg.100
Skylark®
pg. 104
Abella®
pg. 114
capacity†
Incandescent/halogen 120 V M
600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
WBX
2000 W
WBX
WBX
600 VA (450 W)
1000 VA (800 W)
WBX
1500 VA (1200 W)
WBX
WBX
2000 VA (1600 W)
WBX
WBX
600 VA (450 W)
WBX
WBX
1000 VA (800 W)
WBX
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
300 W
450 W
WBX
600 W
WBX
16 A
Neon/cold cathode
WBX
WBX
WBX
WBX
3F
3F
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10® and EcoSystem® ballasts
8 A
16 A
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
3F
3F
Eco-10 and EcoSystem ballasts
16 A
3F
3F
5 A
PA
16 A
TVI
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
176
Appendix | Lighting load interfaces
Dimmer capabilities and
interface requirements
ulti-location—true dimming from each location
M
E eco-model available
Compatible dimmer (no interface)
WBX TVI 3F PA Requires interface, see notes below
M
Dimmers
Ceana®
pg. 120
Ariadni®
pg. 124
Glyder®
pg. 130
Rotary
pg. 134
capacity†
Incandescent/halogen 120 V 600 W
E
E
1000 W
Magnetic low-voltage 120 V
1500 W
WBX
2000 W
WBX
600 VA (450 W)
1000 VA (800 W)
1500 VA (1200 W)
WBX
2000 VA (1600 W)
WBX
600 VA (450 W)
WBX
1000 VA (800 W)
WBX
300 W
WBX
450 W
WBX
600 W
WBX
16 A
WBX
Magnetic low-voltage 277 V
Electronic low-voltage 120 V
Electronic low-voltage 277 V
Neon/cold cathode
WBX
3-wire ballasts and Hi-lume® LED driver 120 V 6 A
Hi-lume, Hi-lume Compact SE,
8 A
Eco-10® and EcoSystem® ballasts
16 A
3F
3-wire ballasts and Hi-lume LED driver 277 V 6 A
Hi-lume, Hi-lume Compact SE,
Eco-10 and EcoSystem ballasts
Tu-Wire® ballasts 120 V
0-10 VDC (ballasts or LED Drivers) 120/277 V
WBX: Wallbox Phase Adaptive Power Module
(PHPM-WBX-DV-WH)
3F: Fluorescent Power Module
(PHPM-3F-DV-WH)
8 A
3F
16 A
3F
5 A
PA
16 A
TVI
TVI: 0-10 V Interface
(GRX-TVI)
PA: Phase Adaptive Power Module
(PHPM-PA-DV-WH)
See pgs. 178–179 for specific compatible dimmer models and switching interface solutions.
†
UL listed for FULL wattage indicated (derate capacity only if ganged with other devices).
www.lutron.com | 1.800.523.9466 |
177
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Incandescent, magnetic
and electronic
low-voltage (120/277 V)
3-wire Fluorescent
ballasts or Hi-lume®
LED drivers (120/277 V)
0-10 VDC Ballasts
or LED drivers
(120/277 V)
WBX
3F
TVI
Wallbox Phase Adaptive
Power Module*
Fluorescent
Power Module*
0-10 V
Interface
PHPM-WBX-DV-WH
PHPM-3F-DV-WH
GRX-TVI
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
–
–
–
Ariadni®
–
AYF-103P-
–
AYF-103P-
–
AYF-103P-
Ceana®
–
–
–
–
–
–
–
DVF-103P-
–
DVF-103P-
–
DVF-103P-
–
DVSCF103P-
–
DVSCF103P-
–
DVSCF103P-
Glyder®
–
–
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
–
LXF-103PL-
–
LXF-103PL-
Diva®
Gloss
Diva
Satin Colors®
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MAF-6AM-
–
MAF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MSCF-6AM-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
–
MRF2F6AN-DV-
Nova®
NF-10-
NF-103P-
NF-10-
NF-103P-
NF-10-
NF-103P-
Nova Tb®
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
NTF-10-
NTF-103P-
Skylark®
SF-10P-
SF-103P-
SF-10P-
SF-103P-
SF-10P-
SF-103P-
Spacer
System®
–
SPSF-6AM-
–
SPSF-6AM-
SPSF-S6A-
SPSF-6AM-
Vareo®
–
VF-10-
–
VF-10-
–
VF-10-
contact Lutron
–
VTF-6AM-
Vierti®
contact Lutron
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
178
Appendix | Lighting load interfaces
Dimmer models/load interface compatibility
Tu-Wire® Fluorescent
Ballasts (120 V)
Switched Lighting
(120/277 V)
PA
SW
Phase Adaptive
Power Module*
Switching
Power Module*
PHPM-PA-DV-WH
PHPM-SW-DV-WH
Dimmer
Family
Singlepole
3-way or
multi-location
Singlepole
3-way or
multi-location
Abella®
–
–
–
AB-S6AM-
Ariadni®
–
AYF-103P-
–
–
Ceana®
–
–
–
–
–
DVF-103P-
–
–
–
DVSCF-103P-
–
–
Glyder®
–
–
–
–
Lyneo® Lx
–
LXF-103PL-
LX-1PSL-
LX-3PSL-
Diva®
Gloss
Diva
Satin Colors®
Technical notes
Maestro®
Gloss
Maestro®
Satin Colors®
Maestro
Wireless®
–
MAF-6AM-
–
MA-S8AM-
–
MSCF-6AM-
–
MSC-S8AM-
–
MRF2F6AN-DV-
–
MRF2-6ANS-
Nova®
NF-10-
NF-103P-
–
–
Nova Tb®
NTF-10-
NTF-103P-
–
–
Skylark®
SF-10P-
SF-103P-
–
–
Spacer
System®
SPSFS6A-
SPSF-6AM-
SPSFS6A-
SPSF-S6AM-
Vareo®
–
VF-10-
–
VETN-1000-
Vierti®
contact Lutron
contact Lutron
Lighting load interfaces
must be matched to
load type and voltage
•
•
•
•
•
•
All load interfaces
for dimmed load
are controlled by
a 120 V 3-wire
fluorescent dimmer
Power feed to dimmer
may differ from lighting
load/interface voltage
Interfaces typically require
additional power feeds
For wiring information,
consult wiring diagrams,
see pgs. 193-195
For assistance and
additional solutions,
consult Lutron
Technical Support
at 1.800.523.9466
(24 hours/7 days)
Interface mounting
PHPM interfaces mount
to 2-gang electrical
backbox (W: 6.30 in x
H: 5.10 in)
•
•
GRX-TVI enclosure is
surface mount only (W:
6.10 in x H: 12.50 in x
D: 3.30 in)
Use only dimmer model numbers listed.
*Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.
www.lutron.com | 1.800.523.9466 |
179
Addendum | Advanced conceptual connections
Nova Tb
®
3-wire
fluorescent
dimming
0-10 V
fluorescent
dimming
2-wire
fluorescent
dimming
Lamps:
Lamps:
Lamps:
Linear
Lamps:
Lamps:
U-Bent
Linear
Hi-lume®
3D Ballasts
Compact
Twin Tube
U-Bent
Linear
Compact
Twin Tube
Compact SETM
Ballasts
Hi-lume®
Ballasts
EcoSystem®
Ballasts
Compact
U-Bent
Linear
0-10 V
Ballasts
(by others)
Tu-Wire®
Ballasts
Eco-10®
Ballasts
†
†
Phase
Adaptive
Power
Interface
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Tu-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For ballast information, visit www.lutron.com/ballasts.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A7
Addendum | Advanced conceptual connections
Nova Tb
®
LED
dimming
Low Voltage
dimming
Magnetic
Low Voltage
Low Voltage
LED Lighting
0-10 V LED
Drivers
(by others)
Hi-lume®
LED Driver
Electronic
Low Voltage
MLV
Transformer
(by others)
ELV
Transformer
(by others)
†
†
3-Wire
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
††
Power
Pack
0-10 V
Dimmer
0-10 V
Interface
3-Wire
Fluorescent
Dimmer
†
MLV
Dimmer
3-Wire
Fluorescent
Dimmer
Wallbox
Phase
Adaptive
Interface
ELV
Dimmer
3-Wire
Fluorescent
Dimmer
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
For more information on LED drivers, visit www.lutron.com/LED.
Interface provides additional capacity and/or may be different voltage than dimmer.
PowerPack provides on/off switching to 0-10 V load.
†
††
www.lutron.com | 1.800.523.9466 |
A8
Addendum | Advanced conceptual connections
Nova Tb
®
Incandescent
dimming
Neon/cold
cathode
dimming
Incandescent/
Halogen
Neon/Cold
Cathode
Switched
loads
Non-Dim
Lighting
Switched
Fan
Switched
Motors
†
Incandescent
Dimmer
Wallbox
Phase
Adaptive
Interface
Wallbox
Phase
Adaptive
Interface
3-Wire
Fluorescent
Dimmer
3-Wire
Fluorescent
Dimmer
†
Switching
Module
Switch
Switch
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
†
Interface provides additional capacity and/or may be different voltage than dimmer.
www.lutron.com | 1.800.523.9466 |
A9
Addendum | Advanced conceptual connections
Nova Tb
®
Ceiling
fan
Ceiling Fan
Fan
Control
For illustration purposes only. Consult model number pages for specific voltage and
capacity information.
www.lutron.com | 1.800.523.9466 |
A10
Addendum | Custom Architectural Wallplates
Table of contents
Standard architectural wallplates.....................B1
Customized architectural wallplates................B1
Determine which architectural
wallplate is right for your application...............B2
How to construct a wallplate
model number.....................................................B3
Derating tables....................................................B9
Multi-gang worksheet......................................B12
Standard architectural wallplates
Six popular 2-, 3- and 4-gang wallplates in nine matte colors
(48-hours shipment available)
««
Fins broken wallplates (FB)
Controls fit into standard size
backboxes with standard size
wallplates
• Dimmers must be derated,
pg. 170
Use with:
• Vareo®
• NovaTa®
• Architectural accessories
• GRAFIK Eye ® seeTouch®, and
architectural style wallstations
• HomeWorks® controls
What’s included:
•
H: 4.56 in x W: 4.56 in
Customized architectural wallplates
Create a wallplate for any application
««
H: 4.56 in x W: 4.56 in
Adapter plate, screws,
wallplate (inserts not included)
Use with:
• Vareo®
• NovaTa®
• Architectural accessories
• GRAFIK Eye ® seeTouch®, and
architectural style wallstations
• HomeWorks® controls
Fins broken wallplates (FB)
•
Controls fit into standard
What’s included:
size backboxes with standard
size wallplates
• Dimmers must be derated
• Combines large and small controls
Adapter plate, screws,
wallplate (inserts not included)
««
Addendum | Custom Architectural Wallplates
No fins broken wallplates (NFB)
• Controls require wider-than-standard
backboxes and wallplates (see pgs. B7–B8)
• Dimmers can be used to their full capacity
• Combines large and small controls
H: 4.56 in x W: 5.41 in
Multi-gang, screwless, seamless wallplates available—wallplate selector tool at
www.lutron.com/lutron/wallplate.
Lutron’s architectural style controls can be ganged at full dimmer capacity using “No Fins Broken”
wallplates. When using “Fins Broken” wallplates, maximum dimmer capacity must be derated. See pg. 170
for complete information on derating a dimmer.
www.lutron.com | 1.800.523.9466 |
B1
Determine which architectural wallplate is right for your application
Standard architectural wallplates
««
Fins broken wallplates (FB)
• 48-hour shipment available
• Use to conserve horizontal wall space
Custom architectural wallplates
««
Fins broken wallplates (FB)
• If you need to conserve horizontal wall space
• If you need to combine large and small controls
• If you need metal wallplates or custom colors
««
Addendum | Custom Architectural Wallplates
No fins broken wallplates (NFB)
• If you need to combine large and small controls
• If you need metal wallplates or custom colors
• Require full rating of dimmers
Lutron’s architectural style controls can be ganged at full dimmer capacity using “No Fins Broken”
wallplates. When using “Fins Broken” wallplates, maximum dimmer capacity must be derated. See pg. 170
for complete information on derating a dimmer.
www.lutron.com | 1.800.523.9466 |
B2
Addendum | Custom Architectural Wallplates
How to construct a wallplate model number
Use the following steps to order multi-gang, metal, and replacement wallplates
1 product code
NT
2 insert code(s)
Thin profile (D: 0.3 in or 7.6 mm)
Vareo®
Nova Ta®
Architectural
accessories
Insert
GRAFIK Eye®
seeTouch® wallstation
N
Wide profile (D: 0.65 in or 16.5 mm)
The detachable face of the product is called
an insert. Each product has its own Insert Code,
see pgs. B5–B6 for a complete listing of model
numbers and their insert codes.
Select Insert Codes and add to model numbers
in left to right order as if looking at the front of the
wallplate (see example at the bottom of this page).
Nova®
When ganging products together
under a common wallplate the
product‘s depth must be the same
style (NT or N).
NT-SOL-FB-WH
www.lutron.com | 1.800.523.9466 |
Inserts used in a fins broken application.
From left to right:
Nova Ta® (small control)
Vareo® (small control)
Nova Ta® (large control)
NT-SOL-FB-WH
B3
Addendum | Custom Architectural Wallplates
3 ganging code
4 color code
FB
Available colors
NFB
Colors (architectural matte finish) (3–5 days)*
WH White
GR Gray
BE Beige
TP Taupe
IV
Ivory
BR Brown
AL Almond
BL Black
LA Light Almond
SI
Sienna
Fins broken
No fins broken
Metals (special finishes) (4–6 weeks)†
SB Satin Brass
SC Satin Chrome
BB Bright Brass
SN Satin Nickel
BC Bright Chrome
BN Bright Nickel
QB Antique Brass
AU Gold Plated
QZ Antique Bronze
Mixing small and large controls
Correct: group small
and large at either end
Sm Sm
Lg
Incorrect: do not
alternate small and large
Lg
Lg SmSm
Sm
Lg
Sm
4.5 in required for
vertical installations
Lg
Lg
Lg
Sm
Sm Sm
Lg
Sm
Lg
Lg
Sm
Determine whether controls need to use maximum
load capacity or can be derated. Derating is the
reduction of the maximum capacity (load) a unit
can reliably handle when fins/side sections are
removed. A scored section along each side of the
mounting plate/fin is designed to be removed to
facilitate ganging.
Anodized aluminum
Lg
Lg
Sm
CLA Clear
BLA Black
BRA Brass
Custom colors and finishes are available by
providing Lutron® with a paint color number,
swatch, or sample. Lutron can color match
your controls. Contact Customer Service at
1.888.LUTRON1.
Multi-gang, screwless, seamless wallplates
available—wallplate selector tool at
www.lutron.com/lutron/wallplate.
CAD file downloads available at
www.lutron.com/technical_info/cad.
See pg. 170 for more information about your specific
product’s derated capacities. Note: If any controls
are ganged under the same wallplate with no fins
broken, then the ganging code is NFB.
*Most matte wallplates ship in 3-5 days; wider
wallplates require additional time.
†
Consult Lutron® Customer Service for pricing
and delivery at 1.888.LUTRON1.
NT-SOL-FB-WH
www.lutron.com | 1.800.523.9466 |
NT-SOL-FB-WH
B4
Addendum | Custom Architectural Wallplates
Model
Number
Insert
Code
Control
Size
O
O
K
K
H
H
K
O
small
small
small
small
small
small
small
small
S
S
S
S
P
S
P
L
U
TF
S
S
S
S
S
S
S
S
P
S
L
S
S
S
S
P
S
P
L
U
small
small
small
small
small
small
small
large
large
large
small
small
small
small
small
small
small
small
small
small
large
small
small
small
small
small
small
small
large
large
Nova Ta®
NT-1PSNT-3PSNT-4PSNT-600NT-603PNT-1000NT-1003PNT-1500NT-1503PNT-2000-*
NT-DPDT-CO-MANT-DPDT-CO-MONTA-2NTB-600NTB-1000NTELV-300NTELV-600NTF-10NTF-103PNTFS-6ENTFS-12ENTFSQNTFTU-5ANTFTV
NTLV-600NTLV-603PNTLV-1000NTLV-1003PNTLV-1500NTLV-1503P-
Insert
Code
Control
Size
Accessories
Vareo®
V-600V-1000VETN-1000VETS-1000VETS-1000-SLVETS-A-SLVETS-RVF-10-
Model
Number
www.lutron.com | 1.800.523.9466 |
NT-6PFNT-CJNT-PJNT-PJ8CJNT-PJ8X2NT-PJ8X3NTR-15NTR-15-GFCINTR-15-IG-ORNTR-20NTR-20-GFCINTR-20-IG-OR-
R31
9
8
TE
TC
TD
R
R31
R1
4
R31
R1
small
small
small
small
small
small
small
small
small
small
small
small
K
T8
T5
T1
A
A
A
R3
R3
R3
R3
R3
R3
small
small
small
small
small
small
small
small
small
small
small
small
small
GRAFIK Eye® Wallstations
NTGRX-1SNTGRX-2B-SLNTGRX-4BNTGRX-4MNTGRX-4SNTGRX-4S-IRNTGRX-SI4S-IRSG-2BISG-4BISG-4MISG-4NRLISG-4SISG-4SIRI-
Blank Inserts and Yokes
For each blank ordered, order one yoke to attach
wallplate to backbox.
small blank insert
E*
small
large blank insert
G** large
**small yoke
NT-YS
**large yoke
NT-YL
*NT-2000- must use NFB Series only.
1
Product insert is permanently attached. Order the
device in the color desired, wallplate will not have
an insert to change the device color in the field.
B5
Addendum | Custom Architectural Wallplates
Model
Number
Insert
Code
Control
Size
Nova®
N-1PSN-1PS-374- -CSAN-3PSN-3PS-374- -CSAN-4PSN-600N-603PN-1000N-1003PN-1500N-1503PN-2000N-2003PNELV-450NF-10NF-10-277NF-103PNF-103P-277NF-20NF-20-277NF-30NFS-6ENFS-12ENFTVNLV-600NLV-603PNLV-1000NLV-1003PNLV-1500NLV-1503PNLV-2003P-
S
S
S
S
S
S
P
S
P
L
U
L
U
S
S
L
P
P
L
L
L
S
L
S
S
P
L
P
L
U
U
small
small
small
small
small
small
small
small
small
large
large
large
large
small
small
large
small
small
large
large
large
small
large
small
small
small
large
small
large
large
large
Blank Inserts and Yokes
For each blank ordered, order one yoke to attach
wallplate to backbox.
small blank insert
E*
small
large blank insert
G** large
**small yoke
N-YS
**large yoke
N-YL
www.lutron.com | 1.800.523.9466 |
Available colors Nova Ta®/Vareo® ONLY
Colors (architectural matte finish) (3-5 days)*
WH
BE
IV
AL
LA White
Beige
Ivory
Almond
Light Almond
GR
TP
BR
BL
SI
Gray
Taupe
Brown
Black
Sienna
Metals (special finishes) (4-6 weeks)†
SB Satin Brass
SC Satin Chrome
BB Bright Brass
SN Satin Nickel
BC Bright Chrome
BN Bright Nickel
QB Antique Brass
AU Gold Plated
QZ Antique Bronze
Anodized aluminum
CLA Clear
BLA Black
BRA Brass
Available colors Nova® ONLY
Colors (architectural matte finish) (3-5 days)*
WH White
LA Light Almond
BE Beige
GR Gray
IV
Ivory
BR Brown
AL Almond
BL Black
*Most matte wallplates ship in 3–5 days; wider
wallplates require additional time.
†
Consult Lutron® Customer Service for pricing and
delivery at 1.888.LUTRON1.
B6
No fins broken wallplates (NFB) (no derating required—full rated capacity)
• For Vareo® and Nova Ta® installations
««
Number of Small Controls
For use with installations that
DO NOT include an NT-2000-
Number of Large Controls
0
1
2
3
0
1
2
3
4
5
NA
1
1+1
4
4+1
7
2.75 in
5.41 in
8.14 in
10.86 in
13.50 in
1
3
5
6
4.56 in
7.22"
10.01 in
12.68 in
4
6
7
9.09 in
11.82 in
14.49 in
For larger wallplate
configurations, contact
Lutron® Customer Service.
6
13.63 in
number of backboxes
wallplate width
No fins broken wallplates (NFB) (no derating required—full rated capacity)
• For Vareo® and Nova Ta® installations
• NT-2000- can be used
««
Addendum | Custom Architectural Wallplates
Number of Small Controls
NT-2000-
Number of Large Controls
1
2
3
0
1
2
3
2
2+1
2+1+1
2+4
4.56 in
7.22 in
10.01 in
12.68 in
2+2
2+2+1
2+2+1+1
9.09 in
11.82 in
14.49 in
2+2+2
For larger wallplate
configurations, contact
Lutron® Customer Service.
13.63 in
number of
backboxes
wallplate width
Note: When ganging an even number of small controls, use backboxes with tapped ears.
Do not use plaster rings or gangbox covers.
www.lutron.com | 1.800.523.9466 |
B7
Fins broken wallplates (FB) (derating required)
• for Vareo® and Nova Ta® installations
««
Addendum | Custom Architectural Wallplates
Number of Small Controls
Number of Large Controls
0
1
2
3
0
1
2
3
4
5
NA
1
2
3
4
5
6
4.56 in
6.32 in
8.45 in
9.97 in
11.85 in
1
3
4
5
6
7
4.56 in
6.32 in
8.14 in
9.97 in
11.85 in
15.5 in
3
5
6
7
8.20 in
9.97 in
11.79 in
15.5 in
5
7
11.85 in
15.5 in
6
For larger wallplate
configurations, contact
Lutron® Customer Service.
number of backboxes
wallplate width
Example: plus sign (1 + 1) two small controls
The plus sign (1 + 1) indicates
the need for additional backboxes
connected by a chase nipple
or spacer with 3/4 in separation
as shown.
See pgs. B5–B6
for small and large
control model
numbers.
3/4 in
Two single-gang
backboxes connected
by a chase nipple
with 3/4 in separation.
Two small controls
mounted on a no fins
broken adapter plate
(provided with wallplate).
Use a spacer, chase
nipple or Lutron® part#
PLUS-ADAPTER® -3.5.
No Fins Broken (NFB)
screwless seamless
wallplate with no
visible hardware
NT-SS-NFB-WH.
www.lutron.com | 1.800.523.9466 |
B8
Addendum | Custom Architectural Wallplates
Derating Table 1
New Architectural | Vierti®
Designer | Maestro®, Maestro IR®, Maestro Wireless®, Spacer System®, Diva®, Lyneo® Lx, Skylark ContourTM, Skylark®
Traditional | Abella®, Ceana®, Ariadni®, Glyder®, Rotary
No fins broken
1 fin broken
2 fins broken
600 W
500 W
400 W
1000 W
800 W
650 W
300 W
250 W
200 W
300 W
250 W
200 W
600 VA / 450 W
500 VA / 400 W
400 VA / 300 W
1000 VA / 800 W
800 VA / 650 W
650 VA / 500 W
300 W
250 W
200 W
500 W
600 W
450 W
500 W
400 W
400 W
Incandescent
Dimmers
Dual dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vierti
60 ballasts / 6 A
50 ballasts / 5 A
35 ballasts / 3.5 A
Maestro /Spacer System
20 ballasts / 6 A
20 ballasts / 5 A
20 ballasts / 3.5 A
no derating
no derating
no derating
5 A
4 A
3.3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A
1.5 A
1.5 A
5 A
4 A
3 A
Quiet 7-speed
1.0 A / 300 W
1.0 A / 300 W
1.0 A / 300 W
Quiet 3-speed
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 300 W
1.5 A / 360 W
1.5 A / 360 W
1.5 A / 360 W
2.5 A / 300 W
2.1 A / 250 W
1.7 A / 200 W
Vierti
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Maestro (light/fan)
8 A / 3 A
6.5 A / 3 A
5 A / 3 A
Abella (light/fan)
6 A / 3 A
5 A / 3 A
3.5 A / 3 A
Diva, Skylark, Lyneo Lx and Ariadni
Tu-Wire®: Spacer System, Diva, Skylark
Fan controls
Fully variable
Fan/light controls
Fully variable
Electronic switches
www.lutron.com | 1.800.523.9466 |
B9
Addendum | Custom Architectural Wallplates
Derating Table 2
Architectural | Vareo®, Nova Tb®
No fins broken
1 fin broken
2 fins broken
600 W
500 W
300 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
1950 W
–
–
600 VA / 450 W
500 VA / 400 W
300 VA / 250 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
300 W
300 W
250 W
600 W
500 W
400 W
20 ballasts / 8 A
20 ballasts / 6 A
20 ballasts / 4.5 A
6 A
no derating
no derating
8 A
no derating
no derating
16 A
no derating
no derating
30 mA ballasts
no derating
no derating
5 A
4 A
3.3 A
1.5 A
no derating
no derating
Fully variable
6 A
4.2 A
2.5 A
Fully variable
12 A
10 A
8.3 A
VETS-1000-
1000 W
800 W
650 W
VETS-1000-SL-
1000 W
900 W
700 W
VETN-1000-
1000 VA
700 VA
550 VA
Incandescent
Dimmers
Magnetic low-voltage
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Vareo
Nova Tb
0-10 VDC control1
Tu-Wire®
Fan controls
Quiet 3-speed
Electronic tapswitches2
For further information on ganging Nova®, visit www.lutron.com/customganging.
PowerPack required for line voltage switching.
VETS-R-Auxiliary electronic tapswitches do not require derating.
1
2
www.lutron.com | 1.800.523.9466 |
B10
Addendum | Custom Architectural Wallplates
Derating Table 3
Architectural | Nova®
No fins broken
1 fin broken
2 fins broken
600 W
600 W
600 W
1000 W
900 W
700 W
1500 W
1250 W
1000 W
2000 W
1800 W
1500 W
600 VA / 450 W
600 VA / 450 W
500 VA / 400 W
1000 VA / 800 W
900 VA / 750 W
700 VA / 500 W
1500 VA / 1200 W
1250 VA / 1000 W
1000 VA / 800 W
2000 VA / 1600 W
1800 VA / 1500 W
1500 VA / 1200 W
450 W
400 W
350 W
16 A
no derating
no derating
8 A
no derating
no derating
6 A
no derating
no derating
60 ballasts / 16 A
no derating
no derating
5 A
4 A
3.3 A
6 A
5.5 A
5 A
12 A
11 A
10 A
Incandescent
1
Dimmers
Magnetic low-voltage
1
Dimmers
Electronic low-voltage
Dimmers
Fluorescent
Hi-lume®/Hi-lume® Compact SE/Eco-10®/EcoSystem®
Nova
0-10 VDC control
Tu-Wire®
Fan controls
Fully variable
Controls must have side sections removed to gang if using VWP wallplates.
Recommended 40 W minimum load.
1
www.lutron.com | 1.800.523.9466 |
B11
www.lutron.com | 1.800.523.9466 |
Position 2
FAX Intnl: 610.282.3090
Project Name:
Room:
Control Address #:
P.O. #:
Fins Broken
No Fins Broken
4.5" Required
Vertical Installations
Position 4
or
or
Page:
Quantity:
Lutron Order #:
Lutron Job #:
Mounting Small
and Large Controls
Mount using center
or offset mounting
holes as needed.
Position 5
FB (Fins Broken)
Wallplate Width:
Position 3
Thin Profile
Vareo®/NovaTa®
Wallplate Thickness:
COPY FOR
EACH USE
Lg
Lg Sm Lg
Sm Sm
Sm
Lg
Lg
Incorrect
Correct
Lg Sm
Sm Sm
Mixing Small and Large Controls
Group large controls together on
one end of the wallplate. Do not
alternate large and small controls.
Position 6
NFB (No Fins Broken)
Heavy Duty Nova®
For additional information use the Wallplate Selector tool located on the Lutron® website at www.lutron.com/lutron/wallplate.
Coopersburg, PA 18036
Phone: 1.888.LUTRON1
FAX West: 610.282.6412
FAX East: 610.282.8321
Wallplate Model #: ________________________________________
Wallplate Color: ___________________________________________
Customization:
Engraving
Custom Color
Silk Screen
Backbox Configurations: ____________________________________
Interface (if needed)
Wallplate Insert Code
Small or Large Control
Derated Capacity
(Fins Broken)
Full Rating
(No Fins Broken)
Control Model Number
Number of Fins Removed
Load Size W/VA/A
Load Type
Position 1
• Outline wallplate gang size below with a marker (cross out the rest)
• For use with Vareo®, NovaTa® and Nova®
Multi-gang Worksheet (1–6 Gang Installation)
Addendum | Custom Architectural Wallplates
B12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement