Toro Multi Pro 5800 (41593) Specifications

Multi Pro

®

5800

Extensive customer input and advanced sprayer technology are built into this innovative dedicated sprayer providing numerous performance and operational enhancements.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

133

Multi Pro

®

5800 Specifications

*

MULTI PRO 5800, MODEL 41593 MULTI PRO 5800, MODEL 41594

ENGINE

Kubota® V1505 N/A, Horizontal, 4-cylinder, 4-cycle, water-cooled, diesel,

1.498L. Rated output 36.5 hp (27.2 kW). Biodiesel B-20 compatible.

Kubota® WG1605, Rated Output: 50 hp (37.3 kw), 1.6L, 4-cylinder liquid-cooled electronic fuel injection, throttle control, three-way catalytic converter, gear-driven valve train, and a diagnostic port.

COOLING SYSTEM Mid-mounted 3.3 quart radiator with oil cooler mounted in front

FUEL SYSTEM

TIRES

12 gallon (45 L) polyethylene fuel tank with 1.5" (38 mm) opening on the passenger side for fueling; Vented fuel cap with mechanical style float gauge,

In-line fuel replacement filter (diesel fuel).

12 gallon (45 L) polyethylene/Nylon low-permeation fuel tank with 1.5" (38 mm) opening on the passenger side for fueling; 3.5 psi Vented fuel cap with electronic fuel gauge on the console, In-tank fuel replacement filter, (unleaded gasoline).

TRACTION SYSTEM Hydrostatic system driving double planetary gear reduction rear wheel drives; Foot pedal control of forward/reverse ground speed

GROUND SPEED/CLEARANCE Forward: 0-10 mph (0-16.1 km/h). Reverse: 0-4 mph (0-6.4 km/h).

Front: 23” diameter, 4-ply rated tire with turf tread pattern; Wheel has 5-hole bolt pattern for lugs.

Rear: 26.5” diameter, 4-ply rated tire with turf tread pattern; Wheel has 8-hole bolt pattern for lugs.

BRAKES 2 wheel mechanical cable operated multi disc wet brakes with additional hydrostatic braking through drive train

MAIN FRAME Welded high strength steel tubular construction

SUSPENSION Front: Straight axle with twin independent leaf springs and dual shock absorbers. Rear: Rigid with high floatation tires.

STEERING Fully hydraulic with dedicated power source 48° steering angle

GAUGES/INDICATORS

CONTROLS

Ignition key switch; Voltage level warning lamp; Coolant temperature warning lamp; Glow plug indicator lamp; Engine oil pressure warning lamp; Spray system pressure gauge.

Throttle control; Spray pump control switch; Jet agitator switch; Individual boom On/Off switches; Indicator lights on pump Switch; Agitator and boom switches;

Headlight Switch; Hour Meter; Speed control switch with indicator light; Plugs for accessory switches

SEATS Bucket seats with easy tilt forward bracket; removable bolts allow for adjustment for various seat positions; Seats are interchangeable from left to right

ELECTRICAL FEATURES 12 volt. 690 cold cranking amps at 0° F (-18° C). 12 volt, 60 Amp alternator. Dash mounted ignition switch, with glow plug timing circuit.

LIGHTS Rectangular 12 volt halogen sealed beam headlights.

SOUND LEVEL 86 dB(A) at operator ear under normal operation

WEIGHT

Drive-on weight: 2,700 lbs. (1,225 kg), Shipping weight: 2,700 lbs. (1,225 kg), Empty vehicle: 2,700 lbs. (1,225 kg),

5525 lbs.(2506 kg), MGVW: 6525 lbs.(2960 kg).

DIMENSIONS

Measurements with spray system—

Overall Length: 154" (391 cm) booms forward.

Overall Width: 81" (175 cm) booms forward.

Height: 57.5" (146 cm)

Turning Diameter: 15’-7” (4.7m) front tire inside

26’-7” (8.1m) front tire outside

WARRANTY Two-year limited warranty. Refer to the Operator’s Manual for further details.

CERTIFICATION SAE 2258 Dec 2003 and EU 98/37EC Machinery Directive

SPRAYER SPECIFICATIONS

SOLUTION TANK High density, impact resistant polyethylene with large 16” (41cm) fill well

RATED CAPACITY 300 gallon (1,136 liter)

SPRAY PUMP 6-diaphragm adjustable hydraulic drive; 40 gpm (151 lpm), 220 psi (1500 kpa) maximums

AGITATOR 4, side-mounted jet agitation nozzles for full tank agitation.

CONTROLS

OPTIONS

Throttle lock, agitation on/off switch, master pump switch, boom raise/lower rocker switches. Boom section on/off rocker switches, manual/automatic mode switch and engine speed control.

Pro Control TM XP Spray System console Model Number 41604; Speedometer Kit Part Number 106-4839; Turf Sprayer Kit (CE) 106-4841; Heat Shield Blanket Kit 106-

4843; Eductor (Clean Load) Model Number 41622; Rinse Kit Model Number 41614; Electric Hose Reel Kit Model Number 41621; Spray Gun Kit Model Number 41118;

Foam Marker Model Number 41232; Ultra Sonic Boom Kit Model Number 41219; Cab with A/C (From Custom Products); Sunshade (From Custom Products); Kubota 60

Amp alternator kit Part Number 117-5540; Toro Covered Boom Shroud Kit Model Number 41602.

Nozzles: Single Nozzle Kit Model Number 41024; Homologation Kit Model Number 41603

OPEN BOOM (STANDARD)

BOOM ASSEMBLY 18.5’ (5.6 m) three section, triangular truss-style open booms, expandable to 20.5' (6.3 m) with optional kit.

SPRAY NOZZLES Drift reduction, quick-disconnect with diaphragm check valves. Triple turret mount.

A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing.

Always wear proper clothing and mask when applying chemicals.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

134

The Multi Pro 5800 is manufactured in

Tomah, WI ISO 9002 Certified Plant.

Multi Pro

®

5800 Accessories

*

PRO CONTROL XP SPRAY

SYSTEM CONSOLE

MULTI PRO 5800 ACCESSORIES

The eXtra Precision avoids waste and ensures maximum efficacy of chemical applications. Simple programming for two preset application rates, plus a manual override mode for spot spraying. XP system automatically and instantaneously calibrates flow to maintain an even and accurate spray application rate. Also compensates for system input changes, such as ground speed variations caused by terrain, and when turning on/off boom sections. Model Number 41604

SPEEDOMETER KIT Part Number 106-4839

TURF SPRAYER KIT (CE) Part Number 106-4841

HEAT SHIELD BLANKET KIT Part Number 106-4843

CLEANLOAD EDUCTOR KIT

This on-board mixing station allows rapid and safe loading of any chemical without the need to first mix into a slurry. Incorporates a built-in bottle wash nozzle and has an optional suction lance to pull in powered to liquid products from their container. Stores within the width of the spray vehicle. Model Number 41622

30 GAL (114 I)

FRESH WATER RINSE KIT

Nesting inconspicuously behind the main tank, this system includes a separate electric pump, plumbing and dual rinse nozzles. At 10 gallons (38 l) per cycle, it has on-board capacity to complete a triple rinse process. Model Number 41614

ELECTRIC HOSE REEL KIT

150’ (45.7 m) of hose for hand or walk spraying applications. Convenient electric powered rewind. Spray gun has an adjustable nozzle from stream to fan. Model

Number 41621.

SPRAY GUN KIT Model Number 41118

PRO FOAM MARKING KIT Foam dollops ensure accurate parallel path tracking. Select foam for either boom or both. Model Number 41232

ULTRA SONIC

BOOM LEVELING KIT

DRIFT REDUCTION

BOOM SHROUD

New sonar sensors automatically maintain proper spray height over undulating turf. Model Number 41219

FULLY ENCLOSED CAB Full-view operator safety cab with AC, wiper and mirror options. (From Custom Products of Litchfield, 1-800-CAB-LINE)

AIR CONDITIONER Custom Products of Litchfield, 1-800-CAB-LINE.

Extends 12” (30.5 cm) below the boom to minimize chemical drift in breezy conditions while retaining full boom system functionality. Model Number 41602

SINGLE NOZZLE KIT Model Number 41024

SPRAY NOZZLES

Full range of contact, systemic and low drift nozzles are available. New air inclusion nozzles provide improved accuracy, more uniform droplets, reduced drift and even coverage.

SUNSHADE Hard shell sunshade canopy w/windshield option. (From Custom Products of Litchfield, 1-800-CAB-LINE)

HOMOLOGATION KIT Model Number 41603. Road light kit (turn signals, beacon, license plate holder).

BBA KIT Model Number 41608. CE/German requirement. Includes fresh water rinse kit and plumbing for BBA compliance.

MANUAL SPRAY KIT Adds a separate control module to operate the sprayer without a ProControl TM XP. Part Number 132-5570

A Safety Reminder: Prior to any application, know the chemical content and the manufacturer’s recommendation for protective clothing. Always wear proper clothing and mask when applying chemicals.

* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.

Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.

2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15

135

The Multi Pro 5800 is manufactured in

Tomah, WI ISO 9002 Certified Plant.