Data sheet optoNCDT 1700BL - Micro
More Precision optoNCDT // Laser displacement sensors (triangulation) Blue Laser Triangulation Displacement Sensors 30 optoNCDT 1700BL optoNCDT 1700BL (20/200 mm) 97 3x Mounting holes ø4.5 89 80 Six models with measuring ranges from 20mm to 1000mm 67 75 Blue Laser Technology (Blue violet laser diode 405nm) 37.5 A B Real Time Surface Compensation ø8 4 ø4 Start 312Hz of 375Hz measuring 1000Hz range Adjustable 13.4 measuring rate 15 up to 2.5kHz range Adjustable filter functions (firmware) Analog Digital Measuring Analog (U/I) and digital output Finside ilter 13.2 High flex cables for dragchain or robot use 24.2 optoNCDT 1700BL (20/200 mm) 18.5 18.5 67 75 15 101 85 200 101 85 39 39Start of B 147 14 15 14 48 70 80 17.5 17.5 Connector (sensor range cable) Connector (sensor cable) ~51 ~51 3x Mounting holes ø6 61 73 83 90 3x Mounting holes ø6 61 73 83 90 35 36.1 ~50 Measuring 12 17.5 17.5 ø5 147 Measuring range 75 30 15 13.2 31 5 ~50 A measuring range 24.2 Connector (sensor side) ø12.5 ~15 ~15 200 Connector (sensor side) 48 25.1 75 24 35.4ø8 Start Measuring range 75 48 100 31 70 80 22.0 95 ø15 ø15 5 B 30.1 35 Measuring range 750 A 40 15 ø12.5 5 Start of measuring range 200 Measuring 13.4 500 range SMR ø35.5 40 ø4 20 4 37.5 B 12 optoNCDT ø35.5 1710 (50/1000mm) 17.5 15 67 75 Start of measuring range MR 15 35 35 18.5 3x Mounting holes ø4.5 optoNCDT 1710 (50/1000 mm) A 24 70 80 30 30 75 B ø5 B ø5 Start of measuring ø5 Start rangeof measuring range 3x Mounting holes ø6 31 24 40 A B 190 195 150 140 130 70 80 3x Mounting holes ø4.5 A 5 15 A 40 13.4 36.1 3x Mounting holes 3x Mounting ø4.5 mm holes ø4.5 14 147 40 15 ø8 15 24.2 75 67 75 4 ø4 ø8 13.4 15 18.5 B A B ø4 24.2 (500/750mm) 36.1 optoNCDT 1700BL optoNCDT 1700BL (20/200 mm) 89 80 39 ø12.5 75 Measuring range Measuring range 13.2 13.2 The inner workings of the Blue Laser triangu150 lation sensor are a complete re-design. The 140 sensors are equipped with new high-end 130 75 control and 3x evaluMounting lenses, new intelligent laser holes ation algorithms. ø4.5 140 150 130 140 130 ø35.5 4 Start of measuring Start of range measuring range Measuring range Measuring range optoNCDT 1700BL (500/750mm) 97 1700BL (500/750mm) optoNCDT 1710optoNCDT (50/1000mm) 150 3x Mounting holes 3x Mounting ø4.5 mm holes ø4.5 A 37.5 37.5 In numerous applications, Blue Laser sensors are superior to standard sensors that use a red laser diode. In contrast to a red laser, the reduced wavelength of the blue laser light does not penetrate materials such as wood, skin and foods. The blue laser generates a minimal laser point on the surface and therefore offers more stable, precise measurements. optoNCDT 1700BL (500/750 mm) optoNCDT 1700BL (20/200 mm) 97 89 97 80 89 80 36.1 61 73 83 90 Equipped with a blue-violet laser diode (405nm), the optoNCDT 1700BL sensor achieves high accuracies on red-hot glowing metals and organic materials. 30 15 Calibration certificate included 31 optoNCDT 1700BL (500/750mm) 150 140 130 75 3x Mounting holes ø4.5 18.5 Model ILD 1700-200BL ILD 1700-500BL 200mm 500mm 750mm 50mm 1000mm 100mm 200mm 200mm 550mm 1000mm 50mm 200mm 450mm 575mm 575mm 1500mm 60mm 300mm 700mm 950mm 600mm 2000mm 16µm 200µm 400µm 750µm 50µm ±1mm ≤±0.1% FSO ≤±0.08% FSO ≤±0.1% FSO ≤±0.1% FSO ≤±0.1% FSO 12µm 30µm 50µm 5µm 100µm 70 80 20mm A End of measuring range B 12 17.5 ≤±0.08% 5 ø5 15 Resolution (at 2.5kHz without averaging) FSO 1.5µm Measuring rate 2.5kHz / 1.25kHz / 625Hz / 312.5Hz (adjustable) Measuring Light rangesource Semiconductor laser <1 mW, 405nm (blue violet), laser class 2 10,000lx Permissible ambient light (with 2.5kHz) Class 2 in accordance with DIN EN 60825-1 : 2008-05 SMR 320µm 1300µm 1500µm 1500µm 400 x 500µm 2.5…5mm MMR 45µm 1300µm 1500µm 1500µm 400 x 500µm 2.5…5mm 320µm 1300µm 1500µm 1500µm 400 x 500µm 2.5…5mm 17.5 35 Laser safety class NCDT 1700BL (500/750mm) NCDT 1700BL (500/750mm) 150 Spot diameter 0.01% FSO/°C 0°C ... +50°C ø15 -20°C ... +70°C Measurements 70 80 Output switchable: 4 ... 20mA / 0 ... 10V RS 422 / USB (optional with cable PC1700-3/USB) ~50 Switching outputs A B Switching input 1 x error or 2x limit values (configurable) 70 80 18.5 18.5 31 75 140 150 EMR 130 140 75 3x 1) Mounting Temperature stability 130 holes ø4.5 75 temperature 3x Mounting Operating holes Connector (sensor side) ø4.5 Storage temperature Laser ON-OFF / Zero A Operation B 5 ø5 via membrane keypad on sensor or via PC with ILD 1700 tool 12 15 17.5 Connector (sensor cable) Power supply 5 ø5 ~15 Sensor cable15(with connector) Synchronization 24VDC (11 … 30 VDC), max. 150mA 12 17.5 standard 0.25m integrated / option: 3m or 10m extensions ~51 possible for simultaneous or alternating measurements Protection class IP65 Vibration 2g / 20 ... 500Hz Shock 15g / 6ms approx. 550g approx. 550g approx. 600g FSO = Full Scale Output; The specified data apply to a white, diffuse reflecting surface (reference: ceramics) 1) based 75on digital output SMR = Start of measuring range; MMR = Midrange; EMR = End of measuring range 75 Connector (sensor side) ~50 ø15 ø15 Connector (sensor side) ~50 Connector (sensor cable) Connector (sensor cable) ~15 ~15 31 17.5 17.5 Weight (with 25cm cable) 31 ILD 1710-1000BL 40mm Start of measuring range easuring range easuring range ILD 1710-50BL Measuring range Linearity Start of easuring range Start of easuring range ILD 1700-750BL Start of measuring range Midrange 40 ILD 1700-20BL ~51 ~51 approx. 600g approx. 800g approx. 800g 36 Accessories optoNCDT Accessories for all optoNCDT Series Accessories optoNCDT 1610 / 1630 Power supply PS 2020 (power supply 24 V / 2.5 A, input 100 - 240 VAC, output 24 VDC / 2.5 A, mounting onto symmetrical standard rail 35mm x 7.5mm, DIN 50022) Supply and output cable PC 1605-3 (3m) PC 1605-6 (6m) PC 1607-5/BNC (5m, BNC connector) Controller unit for evaluation and signal conversion CSP 2008 (controller for multiple signal processing; analog and digital interfaces) Accessories optoNCDT1700/1700LL/1700BL Controller unit for evaluation and signal conversion C-Box/2A (controller for conversion and evaluation of up to two sensor signals) Interface card IF2008 (interface card for multiple signal processing; analog and digital interfaces) USB converter IF2001/USB RS422/USB Converter (converter for digital signals in USB) USB converter IF2004/USB 4 channels RS422/USB Converter (converter, up to 4 digital signals in USB) Accessories optoNCDT 1320 / 1420 / 1402CL1 upply and output cable, drag-chain suitable S PCF1420-1/I (1m, output 4...20mA) PCF1420-1/I(01) (1m, output 4...20mA) PCF1420-3/I (3m, output 4...20mA) PCF1420-6/I (6m, output 4...20mA) PCF1420-10/I (10m, output 4...20 mA) PCF1420-15/I (15m, output 4...20mA) PCF1420-3/U (3m, with integrated resistor, output 1...5 VDC)* PCF1420-6/U (6m, with integrated resistor, output 1...5 VDC)* PCF1420-10/U (10m, with integrated resistor, output 1...5 VDC)* PCF1420-15/U (15m, with integrated resistor, output 1...5 VDC)* PCF1420-3/IF2008 (3m, interface and supply cable) PC1420-6/IF2008 (6m, supply and output cable) PCF1420-10/IF2008 (10m, interface and supply cable) PC 1402-3/CSP (3m, connection cable for CSP 2008, only for optoNCDT 1420) * on request with output 2...10 VDC Supply and output cable, suitable for use with robots (available in 90° version) PCR 1402-3/I (3m) PCR 1402-6/I (6m) PCR 1402-8/I (8m) Supply and output cable (drag-chain suitable) PC 1700-3 (3m) PC 1700-10 (10m) PC 1700-10/IF2008 (10m, for use with interface card IF2008) PC 1700-3/T (3m, for use with trigger box) PC 1700-10/T (10m, for use with trigger box) PC 1700-3/USB (3m, with USB-RS422-converter, power supply 90 ... 230 VAC) Supply and output cable (suitable for use with robots) PCR 1700-5 (5m) PCR 1700-10 (10m) Supply and output cables for temperatures up to 200°C PC1700-3/OE/HT (3m) PC1700-6/OE/HT (6m) PC1700-15/OE/HT (15m) Protection housing SGHF (with air-purge collar), sizes S and M SGH (without air-purge collar), sizes S and M SGHF-HT (with water cooling) Accessories optoNCDT 2300 / 2300LL / 2300BL Supply and output cable PC2300-0,5Y (connection cable to PC or SPS; for operation a PC2300-3/SUB-D will be required) PC2300-3/SUB-D (3m; for operation a PC2300-0,5Y will be required) PC 2300-3/CSP (3m, connection cable ILD2300-UniController) PC 2300-3/IF2008 (interface and supply cable) PC 2300-3/OE (3m) PC 2300-6/OE (6m) PC 2300-9/OE (9m) PC 2300-3/CSP (3m, connection cable ILD2300-UniController) PC 2300-10/CSP (10m, connection cable ILD2300-UniController) PC 2300-15/CSP (15m, connection cable ILD2300-UniController) PC 2300-15/OE (15m) * other cable lengths on request Protection housing SGHF (with air-purge collar), sizes S and M SGH (without air-purge collar), sizes S and M SGHF-HT (with water cooling) Supply and output cables for temperatures up to 200°C PC2300-3/OE/HT (3m) PC2300-6/OE/HT (6m) PC2300-9/OE/HT (9m) PC2300-15/OE/HT (15m) 37 Setup and configuration software The scope of supply includes a software for easy sensor configuration. The settings can be implemented conveniently via a Windows user interface on the PC. The sensor parameters are sent to the sensor via the serial port and can also be saved if required. The software is available as single and multi-channel version. The sensor is connected to the PC via the sensor cable using a USB converter. [for any ILD sensor] Free download Download free of charge from www.micro-epsilon.com/download: software, driver and well-documented driver DLL for easy sensor integration in existing or customer software. Protection housing for harsh environment To protect the laser sensors in extreme environments, individual protective housings are available for all sensor models. There are three different models: SGH model: Completely enclosed housing with an integrated front window, where the sensor measures through the window. The water-resistant housing provides protection against solvents and detergents. SGHF model: With window and compressed-air connection ideal for high ambient temperatures. The integrated air cooling of the housing offers optimum protection for the sensor. SGHF-HT model: This water-cooled protection housing with window and compressedair connection is designed for measurement tasks in ambient temperatures up to 200°C. Suitable for all long-range sensors optoNCDT 1710 optoNCDT 1700-500 and optoNCDT 1700-750 optoNCDT 2310 optoNCDT 2300-200 Maximum ambient temperature 200°C Maximum cooling water temperature T(max) = 10°C Minimum water flow rate Q(min) = 3 liters/min SGx ILD size S (140x140x71mm) for optoNCDT 1700 / 2300 dimensions 97x75mm SGx ILD size M (140x180x71mm) for optoNCDT 1700 / 2300 dimensions 150x80mm 38 Accessories optoNCDT IF2008 - PCI interface card The IF2008 interface card is designed for installation in PCs and enables the synchronous capture of four digital sensor signals and two encoders. The IF2008E expansion board enables the acquisition of two digital sensor signals, two analog sensor signals and eight I/O signals. The absolutely synchronous data acquisition plays an important role particularly for planarity or thickness measurement tasks. The data are stored in a FIFO memory in order to enable resourcesaving processing in the PC in blocks. Features 4x digital signals and 2x encoders with IF2008 basic PCB 2x digital signals, 2x analog signals and 8x I/O signals with IF2008E expansion board Additional expansion board for a total of 6x digital signals, 2x encoders, 2x analog signals and 8x I/O signals FIFO data memory Synchronous data acquisition IF2001/USB converter RS422 to USB The RS422/USB converter transforms digital signals from a laser-optical sensor into a USB data packet. The sensor and the converter are connected via the RS422 interface of the converter. Data output is done via USB interface. The converter loops through further signals and features such as laser on/off, switch signals and function output. The connected sensors and the converter can be programmed through software. IF2004/USB: 4-channel converter from RS422 to USB The RS422/USB converter is used for transforming digital signals from up to four optical sensors into USB data signals. The converter has four trigger inputs and a trigger output for connecting additional converters. Data is output via an USB interface. The connected sensors and the converter can be programmed through software. Features 4x digital signals via RS422 4x trigger inputs, 1x trigger output Synchronous data acquisition Data output via USB C-Box controller for conversion and evaluation of up to two sensor signals C-Box/2A is used for fast D/A conversion of two digital input signals or for evaluating two digital sensor signals. The controller is compatible with the optoNCDT 2300 laser triangulation sensors. Output of the sensor signals is possible via two configurable analog outputs, Ethernet or USB. Handling of the C-Box/2A and of the connected sensors are performed via web interface. Averaging functions, thickness, diameter, step and inclinations can be calculated. The D/A conversion is executed at 16 Bit and max. 70kHz. Interface card IF2008, IF2008E for individual signal processing 39 System design Sensors via RS422 optoNCDT 1420 optoNCDT 1700 optoNCDT 2300 optoCONTROL 2500 optoCONTROL 2600 confocalDT 2451/2471 146 35 Features Real-time capability up to 100kHz (processing and output of measured values with 100kHz) Unique user interface (web browser) for the configuration of the controller via Ethernet on a PC. The user interface does not require any program installation. Display and storage of measured values on the PC via web browser. Simple sensor connection with automatic sensor recognition, configuration of the sensor using buttons and display on universal controller or via web browser Modular system upgradable with additional I/O modules for customerspecific requirements. Internal communication between I/O components via EtherCAT connection (CSP 2008 acts as master). Extremely flexible; function modules are freely combinable Simple mounting using mounting rail TS 35 96.8 103.1 The controller CSP2008 has been designed to process two to six both optical and other sensors from Micro-Epsilon (6x digital or 4x analog input signals max., 2x internal + 4x external via Beckhoff EtherCAT modules. EtherCAT is intended as external bus for connecting further sensors and I/O modules. The controller is equipped with a display offering multi-color backlighting which changes its color in the case of exceeding the limit value while a signal is displayed. 45.2 CSP2008 - Universal controller for up to six sensor signals Beckhoff modules for extended inputs / outputs EK1100, EtherCat bus coupler EL4102, analog output terminal, 0 ... +10V, 2 channels (16bit), EtherCAT EL4132, analog output terminal, -10... +10V, 2 channels (16bit), EtherCAT EL4024, analog output terminal, 4 ... 20mA, 4 channels (12bit), EtherCAT EL2002, digital output terminal, 24 VDC/ 0,5 A, 2 channels, EtherCAT EL2004, digital output terminal, 24 VDC/ 0,5 A, 4 channels, EtherCAT EL3142, analog input terminal, 0 ... 20mA, 2 channels (16bit), EtherCAT EL3162, analog input terminal, 0 ... 10V, 2 channels (16bit), EtherCAT EL1002, digital input terminal, 24 VDC/3 ms, 2 channels, EtherCAT EL1012, digital input terminal, 24 VDC/10 µs, 2 channels, EtherCAT EL1014, digital input terminal, 24 VDC/10 µs, 4 channels, EtherCAT EL1104, digital input terminal, 24 VDC/3 ms, 4 channels, EtherCAT EL5101, incremental encoder interface, RS485 differential inputs, EtherCAT EK1122, 2-Port EtherCAT junction RS422 extension terminal 3.3 Universal controller with mounting rail TS 35 (dimensions in mm, not to scale) 57.9 69.1 Modifications reserved / Y9761188-I021057GKE High performance sensors made by Micro-Epsilon Sensors and systems for displacement and position Sensors and measurement devices for non-contact temperature measurement 2D/3D profile sensors (laser scanner) Optical micrometers, fiber optic sensors and fiber optics Color recognition sensors, LED analyzers and color online spectrometer Measurement and inspection systems MICRO-EPSILON Headquarters Koenigbacher Str. 15 ∙ 94496 Ortenburg / Germany Tel. +49 (0) 8542 / 168-0 ∙ Fax +49 (0) 8542 / 168-90 [email protected] ∙ www.micro-epsilon.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement