PCI-9820 - ADLINK Technology
B u i l d i n g F o r w a r d To g e t h e r
PCI-9820
2-CH 14-Bit 65 MS/s PCI Digitizers with DDR3 RAM
Features
●
Supports a 32-bit 3.3 V or 5 V PCI bus
●
14-bit A/D resolution
●
Up to 60 MS/s (with internal timebase) & 65 MS/s
(with external timebase) sampling rate per channel
●
2-CH single-ended bipolar inputs
●
25MHz -3 dB bandwidth
●
Up to 512 MB onboard DDR3 RAM
●
Programmable ranges of ±1 V and ±5 V
●
User-configurable input impedance of 50 Ω or
high input impedance
●
Scatter-gather DMA
●
Analog and digital triggering
●
Fully auto calibration
●
Multiple modules synchronization capability
Introduction
ADLINK’s PCI-9820 is a 65 MS/s, high-resolution PCI digitizer with
deep DDR3 RAM memory. The device features flexible input
configurations, including programmable input ranges and userconfigurable input impedance. With the deep onboard acquisition
memory, the PCI-9820 is not limited by the 132 MB/s bandwidth of
PCI bus and can record the waveform for a long period of time. The
PCI-9820 is ideal for high-speed waveform capturing, such as radar
and ultrasound applications, as well as software radio applications,
or those signal digitizing applications which need deep
memory for data storage.
Supported Operating System
●
Windows 7/8 x64/x86, Linux
Driver and SDK
●
LabVIEW, MATLAB, C/C++, Visual Basic,
Visual Studio.NET
Software Utility
●
AD-Logger
Cable Accessories
●
●
●
●
●
SMB-SMB-1M
1-meter SMB to SMB cable
SMB-BNC-1M
1-meter SMB to BNC cable
ACL-SSI-2
SSI Bus cable for 2 devices
ACL-SSI-3
SSI Bus cable for 3 devices
ACL-SSI-4
SSI Bus cable for 4 devices
Ordering Information
●
PCI-9820
2-CH 14-Bit 65 MS/s Digitizer
Product Illustration
CLK IN
TRG IO
CH0
CH1
Specifications
Triggering
●
Analog Input
●
●
●
●
●
●
●
●
●
●
●
●
Number of channels: 2 simultaneous-sampled single-ended
Resolution: 14 bits
Maximum sampling rate
• 65 MS/s for 2 inputs
Onboard sample memory
• 512 MB
Bandwidth (-3 dB): 25MHz minimum
Input signal ranges: (software programmable) ±5 V, ±1 V
Input Coupling: DC
Overvoltage protection
Range
Overvoltage Protection
±5V
±1V
± 14 V
±5V
Input Impedance (soldering selectable): 50 Ω, 1.5 MΩ
Crosstalk: < -80 dB, DC to 1 MHz
Total harmonic distortion (THD): -75 dB
Signal-to-Noise ratio (SNR)
Range
SNR
±5V
±1V
66 dB
62 dB
Auto Calibration
●
●
●
Onboard reference: +5 V
Onboard reference temperature drift: 2 ppm/˚C
Stability: 6 ppm/1000 Hrs
External Timebase Input
●
●
●
●
●
●
●
●
Analog Triggering
• Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
• Sources: CH0 and CH1
• Coupling: DC
Digital triggering
• Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger
• Source: external digital trigger from SMB
• Compatibility: 5 V/TTL
General Specifications
●
●
●
●
●
I/O connector
• BNC x 2 for analog inputs
• SMB x 4 for external digital trigger, external time base,
and synchronous digital inputs
Operating temperature: 0˚C to 50˚C (32˚F to 122˚F)
Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
Relative humidity: 10% to 90%, non-condensing
Power requirements
Current
Power Rail
5V
12 V
3.3 V
●
PCI-9820
895 mA
295 mA
430 mA (with 512 MB SDRAM)
Dimensions (not including connectors)
175 mm x 107 mm (6.82” x 4.17”)
Certifications
●
EMC/EMI: CE, FCC Class A
direct external timebase input
Connector: SMB
Impedance: 50 Ω
Coupling: AC
Input amplitude: 1 Vpp to 2 Vpp
Overvoltage protection: 2.5 Vpp
Frequency range: 500 kHz - 65 MHz
www.adlinktech.com
All products and company name listed are trademarks or trade names of their respective companies.
Updated Dec. 12, 2016. ©2016 ADLINK Technology, Inc. All Rights Reserved.
All specifications are subject to change without further notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising