advertisement
▼
Scroll to page 2
of 49
Blu-ray Disc™ Player
BDX5300KB
Owner’s Manual
Contents
English
1 Important.................................................................................................................... 3-6
Safety and important notice...............................................................................................3
Disposal of your old product and batteries....................................................................... 3-5
Notice for Trademark..................................................................................................... ...6
2 Your Product............................................................................................................... 7-9
Regions codes.................................................................................................................. 7
Product overview.............................................................................................................. 8
Remote Control................................................................................................................. 9
3 Connections............................................................................................................10-11
Connecting to a TV..........................................................................................................10
Optional Connection........................................................................................................ 10
Connect USB device........................................................................................................ 11
Connect Power............................................................................................................... 11
4 Preparation.................................................................................................................. 12
Prepare the remote control.............................................................................................. 12
Setting up the player....................................................................................................... 12
5 Playback.................................................................................................................. 13-16
Playback Functions......................................................................................................13-16
6 Customizing.............................................................................................................16-25
General Setting...........................................................................................................16-22
Display Setting............................................................................................................22-23
Audio Setting..................................................................................................................24
System information......................................................................................................... 24
Network Functional description...................................................................................24-25
7 Specification................................................................................................................ 26
8 Troubleshooting......................................................................................................27-28
9 Glossary...................................................................................................................29-30
10 License Information................................................................................................31-49
2
Safety and important notice
•
•
•
•
•
•
Disposal of your old product and
batteries
Warning:
Risk of overheating! Never install the product in a
confined space. Always leave a space of at least
10cm around the product for ventilation. Ensure
curtains or other objects never cover the
ventilation slots on the product.
Never place the product, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
Only use this product indoors. Keep this product
away from water, moisture and liquid-filled
objects.
Never place this product on other electrical
equipment.
Keep away from this product during lightning
storms.
Where the mains plug or an appliance coupler is
used as the disconnect device, the disconnect
device shall remain readily operable.
LASER
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED. DO
NOT STARE INTO BEAM.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.
EU Conformity Statement
This product is marked with "CE" and complies
therefore with the applicable harmonized
European standards listed under the Low
Voltage Directive 2006/95/EC and the EMC
Directive 2004/108/EC. ErP Directive 2009/125/
EC, R&TTE 1999/5/EC
Responsible for CE-marking is
TOSHIBA INFORMATION SYSTEMS (U.K.) LTD,
Toshiba Court, Weybridge Business Park,
Addlestone Road, Weybridge,Surrey,KT15 2UL,
United Kingdom
Pb,Hg,Cd
Following information is only valid for EUmember States:
Disposal of products
The crossed out wheeled dust bin symbol
indicates that products must be collected and
disposed of separately from household waste.
Integrated batteries and accumulators can
be disposed of with the product. They will be
separated at the recycling centres.
The black bar indicates that the product was
placed on the market after August 13, 2005.
By participating in separate collection of
products and batteries, you will help to assure
the proper disposal of products and batteries
and thus help to prevent potential negative
consequences for the environment and human
health.
For more detailed information about the
collection and recycling programmes available
in your country, please visit our website
(http://www.recycle-more.co.uk/ ) or
alternatively please contact your retailer where
the product was purchased.
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol
indicates that batteries and/or accumulators
must be collected and disposed of separately
from household waste.
If the battery or accumulator contains more
than the specified values of lead (Pb),
mercury (Hg), and/or cadmium (Cd) defined in
the Battery Directive (2006/66/EC), then the
chemical symbols for lead (Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
By participating in separate collection of
batteries, you will help to assure the proper
disposal of products and batteries and
thus help to prevent potential negative
consequences for the environment and
human health.
For more detailed information about the
collection and recycling programmes available
in your country, please visit our website
(http://www.recycle-more.co.uk/ ) or
alternatively please contact your retailer
where the product was purchased.
General Information
This appliance may be fitted with a nonrewireable plug. If it is necessary to change the
fuse in a non-rewireable plug the fuse cover must
be refitted. If the fuse cover is lost or damaged,
the plug must not be used until a replacement
available from the appliance manufacturer is
obtained. If the plug has to be changed because
it is not suitable for your socket, or becomes
damaged, it should be cut off and an appropriate
plug fitted following the wiring instructions below.
The plug removed must be disposed of safely as
it is hazardous if inserted into a live socket.
3
English
1 Important
English
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
BLUE: NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains
lead of this unit may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire that is coloured blue must be
connected to the terminal in the plug
which is marked with the letter N or
coloured black.
The wire that is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
Do not connect either wire to the earth
terminal which is marked by the letter E or
by the safety earth symbol
or coloured
green or green-and-yellow.
Use a 5A BS1362 fuse which is approved
by ASTA or BSI. Always replace the fuse
cover after changing the fuse.
Copyright notice
This product incorporates copyright
protection technology that is protected by
U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Rovi Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Rovi
Corporation. Reverse engineering or
disassembly is prohibited.
Disclaimers
I.HEALTH/SAFETY-RELATED
IMPORTANT SAFETY INFORMATION
CONCERNING 3D VIEWING
• If you or any viewer experiences the
following symptoms or any other
discomfort from viewing 3D video images,
stop viewing and contact your health care
provider:
Convulsions
Eye or muscle twitching
Loss of awareness
Altered vision
Involuntary movements
Disorientation
Eye Strain
Nausea/Vomiting
Dizziness
Headaches
Fatigue
• Some viewers may experience a seizure
4
or blackout when exposed to certain
flashing images or lights contained in
certain 3D television pictures or video
games. Anyone who has had a seizure,
loss of awareness, or other symptom
linked to an epileptic condition, or has a
family history of epilepsy, should contact a
health care provider before using the 3D
function.
• If you feel eye fatigue or other
discomfort from viewing 3D video images,
stop viewing and take a rest until the
condition is eliminated.
• Due to the possible impact on vision
development, viewers of 3D video images
should be age 6 or above. Children and
teenagers may be more susceptible to
health issues associated with viewing in
3D and should be closely supervised to
avoid prolonged viewing without rest.
• Avoid use of the 3D function when
under the influence of alcohol.
• Watching the screen while sitting too
close for an extended period of time may
cause eye strain. Consult your display
manual to determine the ideal viewing
distance.
• Viewing in 3D may cause dizziness and/
or disorientation for some viewers.
Therefore, to avoid injury do not place
your player or display near open stairwells,
balconies, or wires, and do not sit near
objects that could be broken if accidentally
hit.
• CAREFULLY READ INSTRUCTIONS
PROVIDED WITH YOUR DISPLAY AND/OR
3D GLASSES BEFORE 3D VIEWING.
II.PERFORMANCE RELATED
• This product is designed to playback
Blu-rayTM discs that comply with the 3D
specifications of Blu-ray Disc Association.
It is not compatible with other 3D
specifications.
CEC compatible.
• Products do not play HD DVD discs.
• Some features subject to delayed
availability.
• Because the Blu-rayTM format and 3D
specifications use new technologies,
certain disc, content, connection and other
compatibility and/or performance issues
are possible. If you experience such
issues, please refer to
www.home-entertainment.toshiba.co.uk
(for UK models) or
http://eu.consumer.toshiba.eu/en
(for Europe continental models) to get
information on the availability of firmware
updates that may resolve your problem, or
contact Toshiba Customer Solutions.
• While every effort has been made at
the time of publication to ensure the
accuracy of the information provided
herein, product specifications,
configurations, system/component/options
availability are all subject to change
without notice.
5
English
• 3D capable display, 3D eyewear and
High Speed HDMI cable (all sold
separately) required for playback and
viewing 3D content.
• If you route your signal through an AV
receiver or other video distribution device
they must be 3D capable to support 3D
viewing. Viewing HD content and upconverting DVD content may require an
HDCP capable input on your display
device.
• While up-converting DVD video content
may result in a picture that appears to be
near HD quality, results may vary
depending on content, display and
settings.
• 1080p capable display required for
viewing content in 1080p.
• 1080p/24 fps encoded content and an
HD display capable of accepting a
1080p/24Hz signal required for viewing
1080p/24 fps content.
• Performance of interactive and/or
network features may vary due to disc
design or content, and may also require
an always-on broadband internet
connection. Firmware update may be
required for some interactive and/or
network features. Some features may
require additional bandwidth.
• BD-LiveTM may require a USB flash drive
with available storage capacity of at least
1GB (sold separately).
• For Dolby® TrueHD and DTS-HD Master
Audio | Essential TM playback, content
encoded in Dolby® TrueHD and DTS-HD
Master Audio | Essential TM format
required. Supported file types: JPEG, MP3
and AVCHD. Some recordable media,
cards or files may not be supported. Deep
Color feature as specified in HDMI
specification requires compatible Deep
Color capable HD display and/or device.
Use of HDMI-CEC requires an HDMI-CEC
compatible display device. Depending on
the specifications of your display device,
some or all HDMI-CEC functions may not
work even if your display device is HDMI-
Notice for Trademark
English
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other
countries.
BONUSVIEW ™
Blu-ray DiscTM, Blu-rayTM, Blu-ray 3DTM, BDLiveTM, BONUSVIEWTM, and the logos are
trademarks of the Blu-ray Disc Association.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Oracle and Java are registered trademarks
of Oracle and/or its affiliates. Other names
may be trademarks of their respective
owners.
“Wi-Fi CERTIFIED” logo is a registered
trademark of Wi-Fi Alliance.
“Wi-Fi PROTECTED SETUP” logo is a
trademark of Wi-Fi Alliance.
DLNA™, DLNA CERTIFIED™ are
trademarks, service marks, or certification
marks of the Digital Living Network
Alliance.
YouTube is a registered trademark of
Google, Inc.
Picasa is a trademark of Google, Inc.
Manufactured under license under U.S.
Patent Nos: 5,956,674; 5,974,380;
6,226,616; 6,487,535; 7,392,195;
7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued &
pending. DTS-HD, the Symbol, & DTS-HD
and the Symbol together are registered
trademarks & DTS-HD Master Audio |
Essential is a trademark of DTS, Inc.
Product includes software. © DTS, Inc. All
Rights Reserved.
‘AVCHD’ and the ‘AVCHD’ logo are
trademarks of Panasonic Corporation and
Sony Corporation.
‘DVD Video’ is a trademark of DVD Format/
Logo Licensing Corporation.
6
Region
Regions Codes
Both the Blu-ray DiscTM Player and the
discs are coded by region. These regional
codes must match in order to play the disc.
If the codes do not match, the disc will not
play.
The Region Number for this Blu-ray DiscTM
Player is described on the rear panel of the
Blu-ray DiscTM player.
Region
U.S.A. and
Canada regions
U.K.,
Europe regions and
Japan
Asia Pacific,
Taiwan, Korea
DVD discs that
can be played
ALL
1
ALL
2
ALL
3
Australia,
New Zealand,
Latin America
ALL
4
Russia and
India regions
ALL
5
China, Calcos Islands,
Walls and Futuna
Islands
ALL
6
Blu-ray™ discs that
can be played
English
2 Your Product
North America,
Central America,
South America,
Korea, Japan, Taiwan,
Hong Kong and
South East Asia.
Europe, Greenland,
French territories,
Middle East, Africa,
Australia and
New Zealand.
India, China, Russia,
Central and
South Asia.
Feature highlights
High-Definition entertainment
Watch high-definition content disc with
HDTV (High Definition Television). Connect
it through a high speed HDMI cable. You
can enjoy excellent picture quality up to
1080p resolution with the frame rate of 24
frames per second with progressive scan
output.
BD-LiveTM
Connect this player to the movie studios
website via the LAN jack or Wi-Fi to
access a variety of up-to-date content (e.g.
refreshed previews and exclusive special
features).
Blu-ray Disc TM Java
Blu-ray Disc TM Java(BD-J) Application
The BD-ROM format supports Java for
interactive functions. “BD-J” offers content
providers almost unlimited functionality
when creating interactive BD-ROM titles.
7
Product overview
English
Main Unit
8
7
6
5
*
4
*
3
*
2
*
1
NO
Control
Function
a
USB jack
Connect a USB flash drive by opening a cover.
b
1
Turn the power on (indicator light in blue) or restores the unit to the standby mode
(indicator light in red).
c
B/X
Playback/Pause.
d
x
Stop play.
e
Z
Open or close the disc compartment.
f
Display panel
Show information about the current status of this unit.
g
IR Sensor
Point the remote control at the IR sensor.
h
Disc compartment
Load a disc into the disc drive.
(b*/c/*d/*e*) Notes:
1. These indicators are located in the sensor field.
2. The indicators will go off briefly after power on (except Power icon). To turn on the indicators again,
simply touch the sensor field, the indicators will be evolved and light up.
3. The sensor field is within the rectangular area.
1
8
2
3
4
NO
Control
Function
a
AC power cord
Connect to a standard AC outlet.
b
COAXIAL jack
Output digital audio signals when connecting the coaxial digital cable.
c
HDMI OUTPUT jack
Output video/audio signals to a connected TV, monitor or AV amplifier.
Connect to a TV, monitor or AV amplifier equipped with HDMI input.
d
LAN jack
When not using Wifi, use this to connect to a network with an always-on broadband
connection. It is reserved for future usage of BD-Live™, bonus content, Media
Server Search, Picasa, YouTube, BBC iPlayer and External Control.
English
Remote Control
OPEN/CLOSE
• Open/ Close the disc tray
Number Buttons
Select numbered items in a menu
Press to enter track/ chapter/ title
numbers/password directly
CLEAR
• To clear an entry or the bookmark and program you set
MC(Media Center)
• To open/close Media Center
POP UP/MENU
• To display a menu included on many
Blu-ray Disc™/DVD video discs
OK
• Acknowledge/ Confirm menu selection
• Navigation/ Cursor buttons for moving
to the left / right / up / down
• Press
during JPEG playback to rotate the
current photo track, but the JPEG playback
will be paused
RETURN
• Return to previous menu
TOP MENU
• To display the disc title during playback
PROGRAM
• To access program list.
DIGEST
• To access JPEG thumbnail
view during playback
SUBTITLE
• To display subtitle; press repeatedly
to select different subtitles available
in your disc
AUDIO
• To select the sound stream; press
repeatedly to select different audio
streams available in your disc
ANGLE
• Switch the camera angle during playback
REMOTE SIGNAL EMITTER
• Point remote control to the sensor on
the front panel
ON / STANDBY
• To switch the Blu-ray Disc™ Player to ON or
standby mode
SETUP
Enter or exit the system setup menu
REPEAT A-B
• To repeat from A to B
REPEAT
• Select various repeat mode.
GOTO
• To goto a title, chapter, track or
playing time
DISPLAY
• To display a window to locate a title,
chapter or track
/
Instant replay/instant search
F.R & F.F
Fast reverse/ fast forward
/
PLAY/PAUSE
• Start/Pause playback
PREV & NEXT
• Skip to previous/next chapter/ title/track
STOP
• Stop playback
• Do a slow forward during normal
playback
• Advance the picture frame by
frame during pause mode
ZOOM
• To zoom out/in
BOOKMARK
• To bookmark at any point during playback
PIP (Picture in Picture)
• Switch on or off the secondary video
PIP AUDIO
Switch the secondary audio
of secondary video(PIP) to on or off
CONNECTED
• To open the MC and directly into the
Connection folder
9
3 Connections
English
Make the following connection to use this
product.
Connecting to a TV
Connect the product to TV via HDMI jack to
view the playback from the disc.
Option 2: Connect to network
Connect this product to the network to
enjoy BD-LiveTM bonus content, Media
Server Search, Picasa, YouTube, BBC
iPlayer, External Control and software
upgrade by network.
Connect to the HDMI Jack
1. Connect the network cable from the LAN
jack on the product to the LAN jack on the
network system.
HDMI IN
1. Connect a HDMI cable from the HDMI
output jack on this product to the HDMI
input jack on the TV.
Optional Connection
Option 1: Connect to the digital amplifier/
receiver
Option 2: Connect to network
Option 3: Connect to Wifi
Option 1: Connect to the digital
amplifier/receiver
Route the sound from this player to other
device to enhance audio output.
DIGITAL AUDIO
INPUT
COAXIAL
1. Connect a coaxial cable from the
COAXIAL jack on this product to the
COAXIAL jack on the device.
10
Option 3: Connect to Wifi
Your Blu-ray Disc™ player has an
integrated Wi-Fi® device and antenna. No
physical connection to the wireless router
is necessary.
wireless access point
1 Configure your player to access the
wireless access point or router.
2 The network configuration and
connection method may vary depending on
the equipment in use and the network
environment. Your Blu-ray Disc™ player is
equipped with an IEEE 802.11n wireless
module, which also supports the 802.11
a/b/g/n standards. For the best wireless
performance, we recommend using an
IEEE 802.11n certified Wi-Fi® network
(access point or wireless router).
Notes:
– You must use a wireless IP sharer that
supports IEEE 802.11a/b/g/n. (n is
recommended for stable operation of the
wireless network.)
– Wireless LAN, in its nature, may cause
interference, depending on the use condition
(AP performance, distance, obstacle,
interference by other radio devices, etc.).
– Set the wireless IP sharer to Infrastructure
mode. Ad-hoc mode is not supported.
– When applying the security key for the AP
(wireless IP sharer), only the following is
supported.
1. Authentication Mode: WPAPSK, WPA2PSK
2. Encryption Type: WEP, TKIP, AES
English
Connect USB device
A USB flash drive provides an additional
memory to software upgrade and enjoy
BD-LiveTM bonus content.
You can also enjoy playing back MP3/JPEG/
MPEG4 files stored in the USB flash drive.
1. Open the USB cover.
2. Connect the USB flash drive to the USB
jack on this product.
Notes:
- To enjoy BD-Live™ bonus content, as your
local storage, use a 1 GB or larger USB
flash drive.
-For some Blu-rayTM discs with BD-LiveTM
feature, you may need to plug in the USB flash
drive before loading the disc. Otherwise, the
disc may not playback.
- TOSHIBA does not guarantee 100%
compatibility with all USB flash drives.
Connect Power
1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
– Before connecting the AC power cord, ensure
you have completed all other connections.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
– The type plate is located on the back of the unit.
11
4 Preparation
English
Always follow the instructions in this chapter
in sequence.
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Find the correct viewing input
1. Press 1 to turn on this product.
2. Turn on the TV and switch to the correct
video-in input (refer to the TV user manual
on how to select the correct input).
Prepare the remote control
Initial Setting
When you turn on this unit for the first time,
you need to follow these steps.
1. A welcome page will be displayed when
this product is powered on.
2. Press OK to enter language setting.
3. Select your desired language,
resolution and aspect ratio using /, then
press OK.
4. Press SETUP to exit the Setup menu.
1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long time, remove the battery.
- Risk of explosion! Keep battery away from
heat, sunshine or fire. Never discard battery in
fire.
Use the SETUP menu
1. Press SETUP to display the Setup menu
when the Blu-ray DiscTM Player is playing or
no disc. And press SETUP to exit the Setup
menu.
• The maximum operable ranges from
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
7m
7m
12
Setting up the player
10 m
7m
10 m
7m
Tip:
- When playing high-definition sources, you must press
STOP button to enter SETUP interface.
Select menu display language
1. Press SETUP, [General Setting] menu
is displayed.
2. Select [Language], then press .
3. Select [OSD], then press .
- The language options may vary for
different regions.
4. Press / to select a language, then
press OK.
Note:
- If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.
Playback Functions
Basic Playback
1. Press button on the front panel or the
remote control, your Blu-ray Disc™ player
will turn on.
The unit will take around 20 seconds to
warm up. When the power supply is first
switched on, the setup of the Power Down
Mode is in Normal mode.
2. Turn on the TV, and then select the input
setting on the TV that matches the
connection method you used to connect your
player.
3. Press OPEN/CLOSE Z to slide out the disc
tray.
4. Place a disc on the disc tray with the label
facing up, and then press OPEN/CLOSE Z to
slide back and close the disc tray.
The disc loading time depends on the types
of disc you are loading, and loading a Blu-ray
DiscTM will take longer time.
5. If the disc does not start playing
automatically, please press B/X to start
playback.
6. If a Blu-ray DiscTM or DVD menu displays,
use cursor buttons to select PLAY. Then,
press OK to confirm.
7. To eject the disc, press OPEN/CLOSE Z.
Pause playback
1. Press B/X to pause playback. The
sound will be muted.
2. Press B/X to resume the playback.
Stop playback
1. Press STOP button once to go to resume
mode, the TV screen will show the resume logo.
2. Press STOP twice to stop the playback
completely.
3. Press B/X to resume playback from the
point where playback is stopped or from the
beginning of the disc after the playback is
completely stopped.
Not all Blu-rayTM discs support the resume
feature.
Fast Forward and Fast Reverse
how many times you pressed the button. The
speed will increase through the following
sequence:
2X, 4X, 8X, 16X, 32X
2. Press B/X to resume playback.
3. Press F.R m to fast reverse through the
disc. The fast reverse speed changes based on
how many times you pressed the button.
The speed will increase through the
following sequence:
2X, 4X, 8X, 16X, 32X
4. Press B/X to resume playback.
Instant Search and Instant Replay
1. During playback, press and hold M button,
you can search 30 seconds forward.
2. During playback, press and hold m
button, you can instant replay the content
from 10 seconds before.
Previous and Next
During playback, press PREV . button,
and you can skip back to the previous
chapter or track. Each press of this button
will allow you to skip a chapter or track till
the beginning of the disc.
Press of NEXT > button during playback
will allow you to skip the playback to next
chapter or track.
Slow Forward
1. Press =B during normal playback. The slow
forward speed is 1/16 in default.
2. To change slow forward speed, press =B
repeatedly, and the slow forward speed will be
changed in the following sequence: 1/16, 1/8,
1/4, 1/2, normal.
3. To exit slow forward mode and return to
normal playback, press B/X.
Step Forward
Use this feature to help you to enjoy the
video frame by frame.
1. Press B/X during normal playback,
then playback will change to pause state.
2. Press ==B repeatedly to advance the
picture frame by frame.
3. Press B/X to resume normal playback.
CONNECTED
To open the MC and directly into the
Connection folder.
1. Press F.F M to fast forward through the
disc. The fast forward speed changes based on
13
English
5 Playback
Advanced Playback
English
DISPLAY
Press this button and the screen will display
some information about disc, such as: Title
number, Chapter number, Track number,
Elapsed Time, Mode, Audio, Angle, and
Subtitle languages. Press this button again to
turn off the information display.
REPEAT
Press REPEAT repeatedly to select different
repeat modes.
Blu-ray DiscTM :Repeat Chapter and Title.
DVD:Repeat Chapter, Title and All.
VCD PBC Off/CD-DA/JPEG/MP3:Repeat Track
and All.
A-B
To play certain section within the video or
song, press A-B button to set the start point.
Then, press A-B button again to set the end
point and complete the setting. The selected
section will be played repeatedly.
Press A-B button the third time to cancel this
function. The end point cannot be set until 5
seconds of playback has elapsed from the
start point.
Not all Blu-rayTM discs support the repeat A-B
feature.
GOTO
During playback, press GOTO button to edit
Title, Chapter, and Time.
Press / and OK button on the remote
control to select Title, Chapter, or Time. Then
press the numeric buttons or / and then
press OK. The playback will skip to the
desired location.
For Time Search, press / to select Title
or Chapter time search.
SUBTITLE
Press this button repeatedly and the screen
will display “X/XX XXX” or “Off”. The “X”
indicates the current number of this
language; “XX” indicates the total number of
language; “XXX” indicates the language.
The number of available languages depends
on the disc.
RETURN
Press this button to return to the previous
on-screen menu in setup menu such as
External Memory Information, Parental
Control, Country Code, etc.
During MP3/JPEG/VIDEO playback, press
RETURN once, it will return back to Media
Center page.
During VCD disc playback and PBC On is
selected, press the button to return to PBC
Menu.
14
ANGLE
During playback, press this button to change
the angle of the picture. The screen will
display “Angle X/X.” The first “X” indicates the
current number of angle, and the second “X”
indicates total number of angle.
Not all Blu-rayTM or DVD has the multi-angle
feature. The screen will take around 5
seconds to change.
TOP MENU
You may press this button at any time, and
the Blu-ray DiscTM or DVD video disc playback
will pop up the disc menu.
POP UP/MENU
During Blu-ray DiscTM playback, press POP
UP/MENU to display the disc title, and the
playback will not be stopped even the menu
is on the screen.
1. Press the /// buttons to select an
option, then press OK to confirm.
2. Press POP UP/MENU to close the menu.
During DVD playback, press POP UP/MENU
to open the disc menu.
During VCD playback, press POP UP/MENU
to switch PBC On/Off.
During displaying USB and Data Disc file
content in media center, press POP UP/MENU
to add the Photo/Music/Video files to the
playlist.
1. Press /// buttons to select an
option under the Photo/Music/Video files.
2. In the file browser, press to select the
file(s) to be added to the playlist. "√ " will
appear beside the selected files.
3. Press POP UP/MENU button, a pop up
menu will appear, then press / and OK
button to select "Add to Playlist" to add the
files to the Playlist. "Select all" and "Clear all"
options are also available. Select "Cancel" to
exit the pop up menu.
All the selected files will be added to the
"Playlist" folder. You can play or delete the
files in the playlist. Press POP UP/MENU to
delete the selected files in "Playlist".
Note:
-This function is disabled for media server
browsing.
SETUP
Press the SETUP button, and the screen will
display some information about the player,
such as:
• General Setting
• Display Setting
• Audio Setting
• System Information
[Time]: View the elapsed/remaining playback
time of title/chapter. Use / to view: the
elapsed playback time of title, the remaining
playback time of title, the elapsed playback
time of chapter, and the remaining playback
time of chapter.
[Mode]: Select playback mode among
shuffle, random, and normal.
[Audio]: The Blu-ray DiscTM/DVD disc’s
soundtrack language. Use / to view the
audio available in the disc and select your
desired Audio type.
[Angle]: The angle view of current playback/
the angles in total. Please reference
Playback > Angle to see more detailed info.
Use / to select your desired angle view.
[Subtitle]: The Subtitle in current playback.
Use / to view the subtitles available in
the disc and select your desired subtitle type
or turn it off.
[Subtitle Style]: When you play the Blu-ray
DiscTM or DVD disc and if it has external
subtitle, you will see it in OSC menu.
[Bitrate]: Use / to select audio or video
bitrate.
[Still Off]: Close the Still feature of DVD disc.
For some DVD discs, a certain video picture
will be frozen as a still picture during the
process of playback to let the user has a
better view of certain picture. To continue
playback, select Still Off.
[Instant Search]: Instant search 30 seconds
forward.
[Instant Replay]: Replay the content from 10
seconds before.
Tip:
- The specified operation for each item will vary with
disc types. And some items are available only when
the disc is supportable.
15
English
PROGRAM
During CD/DVD/VCD playback, you can press
this button to edit the sequence of the
playlist.
BOOKMARK
During VCD/DVD disc playback, press the
BOOKMARK button to add the bookmark;
press and hold for a few seconds to display
the list of bookmark which you added before
on the screen, then you can press the OK
button to select the bookmark or CLEAR
button to delete the bookmark.
AUDIO
Press AUDIO button on the remote control to
select the audio streams that set within the
Blu-rayTM or DVD disc.
The screen will display:
AUDIO: X / XX XXX XXXX
“X” - The Current Audio Stream Number
“XX” - The total number of Audio Stream
“XXX” - Audio Language
“XXXX” - Audio Technology
MC
Press this button to open Media Center. In
Media Center, you can choose to play the files
in USB, Data Disc, Media Server Search or to
use other network features.
ZOOM
Press ZOOM button repeatedly to Zoom in/out
playback in the video.
Zoom mode : Zoom 2x -> Zoom 3x -> Zoom
4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.
DIGEST
During playback of JPEG disc, press DIGEST
to view a page of 12 thumbnail images.
- Use /// to select an image.
Press OK to view the selected image in
full-screen and subsequent images will be
displayed one after another automatically.
- Press PREV /NEXT
to view the
previous or next thumbnail screen.
PIP AUDIO
Press PIP AUDIO button to open the
secondary audio of secondary video(PIP’s
sub-window video).
OSC
Press OSC to open On Screen Control menu
during playback. In this menu, you can make
some playback-related control.
The on screen control contains following
items:
[Title]: The title in current playback/titles in
total. Select your desired title to playback.
[Chapter]: The chapter in current playback/
chapters in total. Select your desired chapter
to playback.
Blu-ray DiscTM BONUSVIEWTM
English
Playing Secondary Video (Picture-in-Picture)
and Secondary Audio is for Blu-ray DiscTM
only. Secondary video can be played from a
disc compatible with the Picture-in-Picture
(PIP) function. For the playback method,
refer to the instructions for the disc.
1. Turn on secondary video by pressing the
PIP button.
2. Press the PIP AUDIO button to select the
secondary audio, and select an option except
Off. The secondary audio is opened, you can
hear the disc secondary video sound.
In order to hear the secondary audio, the PIP
feature on the disc must be turned on.
3. Press the PIP button again to turn off the
secondary video.
Primary video
Secondary video
with Secondary Audio
This function is not available when the
primary video is played in Search, SlowMotion, or Frame-by-Frame or Fast Forward/
Reverse mode.
To listen to the secondary audio, the digital
audio output must be set to "Bitstream",
"Re-encode" or "PCM". Otherwise, only the
primary audio can be heard.
Notes:
- Not all the Blu-ray™ discs can support this
function.
- High Definition PIP (Second Video) is not
supported.
16
Watermark
This product uses Cinavia technology to
limit the use of unauthorized copies of
some commercially-produced film and
videos and their soundtracks. When a
prohibited use of an unauthorized copy is
detected, a message will be displayed and
playback will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.
com. To request additional information
about Cinavia by mail, send a postcard
with your mailing address to: Cinavia
Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA
6 Customizing
This section describes the various setting
option of this Blu-ray DiscTM player.
If the setup option is greyed out, it means
the setting cannot be changed at the
current state.
General Setting
1. Press SETUP button on the remote
control. The Setup Menu appears.
General Setting
System
Screen Saver
On
Language
Disc Auto Playback
On
Playback
CEC
On
Security
Load Default
More...
Network
Upgrade
More...
Move cursor key to select menu option
then use “OK” key to select
SETUP Exit
2. Press to select an option, then press
to access.
3. Press / to select a setup option and
press .
4. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous menu.
[System]
To change the following system option to
personalize your Blu-ray DiscTM player.
• [Screen Saver]
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 5 minutes with no
operation. You can turn off the screen
saver by pressing the SETUP button.
- The Blu-ray DiscTM Player will switch to
standby mode if there is no operation
after the screen saver is engaged for
approximately 10 minutes.
{ Off } – Turn off the screen saver
mode. The Blu-ray DiscTM player will not
switch to standby mode automatically.
• [Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
• [CEC]
This player supports REGZA-LINK which
uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use one single remote control to control
6. Press OK, enter Resolution setting.
Auto
Choose
a resolution that fits your TV.
480i/576i
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
English
all REGZA-LINK-compliant devices that
are connected through HDMI connectors.
{On} - Turns on REGZA-LINK features.
-With CEC on, during TV standby with
the Blu-ray DiscTM Player on, pressing
SETUP, PLAY/PAUSE will power on the
TV. When you turn the TV off, this unit
will automatically turn off.
{Off} - Disables REGZA-LINK features.
• [Load Default]
Reset all settings of Blu-ray DiscTM Player
to initial default state.
- Follow the instruction on the TV screen
to confirm the default setting operation.
1. Select Load Default.
2. A dialogue box pops up shown as
below. Select OK.
480p/576p
720p
1080i
1080p
Previous
OK
Next
Press / to select an option. Press OK.
Select "Yes" or "No" using /.
Resolution
has been changed!
14s
Yes
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
Previous
No
OK
Next
7. Press OK, enter Aspect ratio setting.
Load Default
Choose
an aspect ratio that fits your TV.
Do you want to load default?
Cancel
OK
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
3. It may take awhile when loading
default is in progress. Please wait...
Previous
16:9 Full
16:9 Normal
4:3 Pan&Scan
4:3 Letterbox
OK
Next
Press / to select an option. Press OK.
Load Default
Loading default, please wait...
Setting
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
30%
4. TV will display as follow:
Welcome
Previous
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
OK
Next
5. Press OK, enter language setting.
Press/ to select a language option.
Choose
an OSD language before starting.
English
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
Previous
OK
Next
OK
Finish
8. Press OK to return to [General Setting]
Menu.
• [Upgrade]
For software upgrades to enhance
performance, you could select the
following upgrade method and start to
upgrade.
{Disc}/{USB Storage}/{Internet}
SW upgrade by Disc/USB Storage
Upgrade the software from the disc or USB
flash drive.
1. Insert the disc or connect the USB flash
drive which contains the upgrade file
package.
2. Follow the instruction on the TV
screen to confirm upgrade operation.
- The system will reboot after 5 seconds or
OK key is pressed.
17
English
Notes:
- If set [Disc Auto Playback] to [Off], after you
insert the disc that contains the upgraded
information to upgrade system, you have to start
upgrade from this option of SETUP Menu.
- If the upgrade file package did not pass the
verification, error prompt is displayed , check the
package again (such as the package is not
complete).
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB flash
drive, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
SW upgrade by Internet introduction
There are two modes to upgrade via
internet: Automatic Mode and Interactive
Mode.
Automatic Mode:
The player will check the internet whether it
is connected automatically when powered on.
If connected, player will try to connect the
Toshiba server to check if there is new
firmware for the player.
If yes, the player will pop up a message on
the screen to inform you that an upgrading
firmware is available on the internet. You can
choose whether to upgrade or not.
Upgrade
New software found! Upgrade?
Cancel
OK
Start
Interactive Mode:
You can also do Internet upgrade via setup
menu.
You should make sure that the player is
connected to the internet first.
Press SETUP button of the remote control,
then choose "System -> Upgrade ->
Internet" and press OK button. Then the
player will connect the Toshiba server to
check if there is new firmware for the player.
Upgrade
Upgrade
New software found! Upgrade?
Cancel
Upgrade
Current version is latest. Update is not
available.
Cancel
Remark :
If you choose to upgrade the new FW ,
1.The player will begin to download the
upgrade file and pop up a message to show
the progress.
Upgrade
Downloading upgrade file.Please wait!
Cancel
2. When download is finished, the player will
pop up a message for you, and you can choose
whether to proceed with the upgrading or not.
If you choose to upgrade, the player will begin
to upgrade, and pop up a message to show the
progress. When upgrade is done, the player
will restart.
Attention! Do NOT cut off the power supply
when the firmware is upgrading! If not, the
player might become unworkable.
• [External Memory]
External Memory would be used in BDLiveTM function. When you plug in the
USB flash drive which has at least 1GB
free space to play BD-LiveTM function,
the Blu-ray DiscTM system would make a
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
Connecting to the server. Please wait!
General Setting
Screen Save
Information
Disc Auto Playback
Off
Language
Playback
CEC
On
Security
Disc Auto Upgrade
On
Network
Load Default
More...
Erase
System
If yes, the player will pop up a message on
the screen and you can choose whether to
upgrade or not.
Start
OK
If no, the player will pop up a message on
the screen to inform you that there is no new
firmware for the player.
Free size is : 0MB
Move cursor key to select menu option
then use “OK ” key to select
On
RETURN Return
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
18
Quick Start can reduce the time of Power
On or Power Off significantly. But the
power consumption is higher in Quick Start
mode.
Setting methods:
Setup Menu -> General Setting ->System>Power Down Mode -> Normal/Quick Start
(Default as Normal).
Choose Quick Start to go into Quick Start
mode. This mode will only be activated
upon your next standby Off/On.
Generally, in Normal mode, Power On or
Power Off takes longer time and its
standby power consumption is low. In
Quick Start mode, Power On or Power Off
takes shorter time and its standby power
consumption is higher.
Notes:
-Please be noted that the responding time to
the video output varies for different TV,
therefore the responding time to power on the
TV in Quick Start mode may vary.
-The player will reset to Normal mode
whenever the AC power recovers from a loss.
[Language]
Set up the OSD(On-Screen Display), Menu,
Audio and Subtitle default language for the
player.
General Setting
System
OSD
English
Language
Menu
English
Playback
Audio
English
Security
Subtitle
English
Network
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
• [OSD]
Select the default on-screen display
language.
• [Menu]
Select the default menu language.
• [Audio]
Select the default audio language.
• [Subtitle]
Select the default subtitle language.
[Playback]
General Setting
System
Angle Mark
On
Language
PIP Mark
On
Playback
Secondary Audio...
On
Security
Last Memory
On
Network
PBC
On
Move cursor key to select menu option
then use “OK ” key to select
SETUP
Exit
• [Angle Mark]
Some Blu-rayTM discs/DVDs contain the
scenes recorded with multiple angles,
which allow you to enjoy the videos with
your desired angles, therefore the angle
mark is displayed only when the Blu-ray
Disc™/DVD disc is supportable for multiangle and Angle Mark is set to ON.
{On} – Display the angle mark.
{Off} – Hide the angle mark.
• [PIP Mark]
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset window is
called Sub Window. The PIP mark is
displayed when in PIP mode and PIP Mark
is set to ON.
{On} – Display the PIP mark.
{Off} – Hide the PIP mark.
Note:
- High Definition PIP (Second Video) is not
supported.
• [Secondary Audio Mark]
{On} – Display Secondary Audio Mark.
{Off} – Hide the Secondary Audio Mark.
• [Last Memory]
If you open the disc tray or switch this
Blu-ray Disc™ player to standby state
during normal playback, the Blu-ray Disc™
player can memorize the end playing point,
the player will start playback from the
memorized point next time.
{On} – Active Last Memory feature.
{Off} – Disable Last Memory feature.
Note:
- Not all the Blu-rayTM discs can support this
function.
• [PBC]
VCD2.0 has PBC control (Playback Control)
menu, which allow you to interact with the
system via menu.
{On} – Display playback control menu, use
NUMBER keys to select desired option.
{Off} – Hide playback control menu and
start playback from track1 automatically.
• [Closed Caption]
Allow people who are deaf or hearing
impaired, to have access to television
programming by displaying the audio
portion of a television programme as text on
the screen.
{On} – Display the Closed Caption.
{Off} – Hide the Closed Caption.
19
English
• [Power Down Mode]
[Security]
3. Select a rating level, then press OK.
General Setting
General Setting
Change Password
More...
System
Language
Country Code
More...
Language
Playback
Parental Control
More...
English
System
Select level:
Off
CEC
On
[1] KID SAFE
Security
Security
[2] G
Disc Auto Upgrade
On
Network
Network
Load Default
More...
Move cursor key to select menu option
then use “OK ” key to select
General Setting
System
Language
Playback
Security
Network
Screen Save
Off
Change Password
Disc Auto Playback
On
CEC
On
Disc Auto Upgrade
On
Load Default
More...
Please enter current password:
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
1. Use NUMBER keys to enter four digit
old password. The default password
is "0000".
2. Enter the new password.
General Setting
Language
Screen Save
Off
Change Password
Disc Auto Playback
On
Playback
CEC
System
Security
Network
New password :
Disc Auto Upgrade
Confirm password :
Load Default
Move cursor key to select menu option
then use “OK ” key to select
All children and general guidance
PG
Parental guidance
PG-13
Parental guidance for children under 13
PGR
Parental guidance Recommended
R
Restricted viewing
NC-17
No one 17 and under allowed
ADULT
Adult only
Notes:
- Rated discs above the level you set in [Parental
Control] require a password to be entered.
- The ratings are country dependent. To allow
all discs to play, select 'Off'.
[Network]
General Setting
Language
Wireless Setting
Playback
IP Setting
General Setting
Screen Save
Off
Parental Control
Disc Auto Playback
On
On
Security
Disc Auto Upgrade
On
Network
Load Default
More...
Move cursor key to select menu option
then use “OK ” key to select
G
More...
RETURN Return
Enter
CECpassword:
Description
KID SAFE Safe for kids
On
This ensures that you will be able to see
the scenes intended for your current
residential Country/Area.
Use NUMBER Keys to enter your
password, then you can choose your
Country/Area.
• [Parental Control]
Restricts access to discs that are
unsuitable for children. These discs must
be recorded with rating.
1. Press OK.
2. Use NUMBER keys to enter the
password.
Playback
Items
System
3. Enter the new password again to confirm.
Language
RETURN Return
On
• [Country Code]
System
Off
SETUP Exit
• [Change password]
Follow the instruction on the TV set or
change the password for locked discs
and play restricted Blu-rayTM discs/
DVDs.
20
Playback
Screen Save
Off
Parental Control
Disc Auto Playback
On
RETURN Return
Interface
Security
Connection Test
Network
Information
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
To enjoy BD-Live™ bonus contents,
Media Server Search, Picasa, YouTube,
BBC iPlayer and External Control, set up
the network connection.
Connect to network with Ethernet
1. Connect the Blu-ray Disc™ player to
the broadband modem or router.
2. In the Setup menu, select [Network],
then press .
3. Select [Interface] in the menu, then
press OK to select [Ethernet].
4. Select [IP Setting] in the menu, then
press OK to select [Auto]. An IP address
is obtained automatically.
If no IP address is obtained, select
[Manual] to input IP Address, Subnet
Mask, Default Gateway, DNS1/DNS2
and press OK to re-connect again to the
network. It will try to obtain the IP
address again.
5. Press RETURN or press OK to exit.
Notes:
- Ensure that the Wifi router is switched on.
- A contract with the provider is needed to connect to
the Internet.
- Loading BD-Live™ content from the internet may
take some time, depending on the file size and the
speed of the internet connection. To enjoy BD-LiveTM
bonus content, you need to connect 1GB or larger USB
flash drive.
- Depending on the WPS type, password input prompt
may not be displayed.
- The network ID (SSID) and password input are case
sensitive.
• [Interface]
Choose the way to connect network,
Ethernet or Wireless.
• [Wireless Setting]
When "Wireless" is chosen in Interface,
you can use Wireless Setting option to
search and connect a wireless network.
• [IP Setting]
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
• [Connection Test]
Display Network connection status
information.
• [Information]
Display all Network Information.
• [BD-Live Connection]
{Permitted} – During playback of
BD-Live™ disc, the disc may
automatically download all information
from appointed network.
{Partial Permitted} – During
playback of BD-Live™ disc, the disc may
automatically download partial of the
information from appointed network.
{Prohibited} – Disable downloading
information from network.
• [Media Server Search]
Enable or disable the Media Server Search
feature. See details in page 24 for Media
Server Search introduction.
{Enable} – Enable the Media Server
Search feature.
{Disable} – Disable the Media Server
Search feature.
• [External Control Setting]
Set up the External Control Setting
information.
{Device Name}
Input the Device Name (to control the
21
English
Notes:
- Ensure that the network cable is properly
connected and the router is switched on.
- During [Manual] mode, if the number is entered
incorrectly, press to erase the number.
- This player does not support automatic detection of
cross-cables. Use the straight (standard) LAN cable.
Connect to network with Wireless
1. In the Setup menu, select [Network], then
press .
2. Select [Interface] in the menu, then press OK
to select [Wireless].
3. A message will pop up on the screen, select
"Yes" to continue.
4. Select [Scan] or [Manual] or [Auto].
5. Then select "Next" and press OK to continue.
[Scan]
Select [Scan] in the menu, the Blu-ray DiscTM
player will start scanning and provide a list
of available network in your area. Select
your network ID and then press OK twice,
the alphanumeric keys will appear for you to
input your password. If your network does
not required password, press OK once.
[Manual]
If you know the details information of a
network, you can choose this way to connect a
wireless network. First, enter the ID of the
network (SSID), then select the encryption
type of WPS and lastly enter the password.
Press OK to call out the alphanumeric keys
on the screen for your entries. Then you can
connect the Blu-ray DiscTM player to the
network.
[Auto]
The Blu-ray DiscTM player will try to connect
automatically to a wireless network.
PBC (Push Button Configuration):
1. Turn on the router, set it to WPS, then press
WPS button if it has it.
2. Switch on the Blu-ray DiscTM player and
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PBC -> Next.
3. Press SETUP to exit.
PIN (Personal Information Number):
1. Turn on the router.
2. Switch on the Blu-ray DiscTM player and
connected devices, then use remote control to
choose: General Setting -> Network ->
Interface -> Wireless -> Auto -> PIN.
A set of PIN code will be prompted.
3. Then open web browser to go to the router
setting page to input the PIN code.
4. Select "Next" on the Blu-ray DiscTM player.
5. Press SETUP to exit.
English
Blu-ray DiscTM player from the iPhone
etc.) by using the on-screen software
keyboard.
Strings(1-15 characters), [A-Z][A-Z0-9]*
{User Name}
Input the User Name (to control the
Blu-ray DiscTM player from the iPhone
etc.) by using the on-screen software
keyboard.
Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
{Password}
Input the Password (to control the Blu-ray
DiscTM player from the iPhone etc.) by
using the on-screen software keyboard.
Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
{Port Number}
Port Number should be 80 or integer from
2000 to 10000, the default value is 4000.
Note:
- Toshiba does not guarantee normal operation
with all connected devices.
(*)Notes:
- Strings(1-15 characters), [A-Z][A-Z0-9]*
You can input 1-15 characters in Device Name,
[A-Z] represent the first character, you can only
choose from capital letter A to Z. [A-Z0-9]
represent the rest of the characters, you can
choose from capital letters A to Z or numbers
from 0 to 9.
- Strings(Max. 16 characters), [a-zA-Z0-9]
[a-zA-Z0-9_-¥.]*
You can input 1-16 characters in User Name
and Password, [a-zA-Z0-9] represent the first
character, you can choose from both the
lower-case a to z and capital letters A to Z or
number from 0 to 9.[a-zA-Z0-9_-¥.] represent
the rest of the characters, you can choose from
both the lower-case a to z and capital letters A
to Z, numbers from 0-9 or symbols.
22
Display Setting
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Display Setting],
then press .
3. Select an option, press to access.
Display Setting
TV
TV Screen
Video Process
Resolution
Auto
Color Space
YCbCr422
16:9 Full
HDMI Deep Color
Off
HDMI 1080/24p
On
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – For a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – For a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{4:3 Pan&Scan} – For standard TV, it
displays a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – For standard TV, it
displays a wide picture with two black
borders on the top and bottom of 4:3
screen.
• [Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV.
{480i/576i}, {480p/576p}, {720p},
{1080i}, {1080p}
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
Notes about HDMI 1080/24p:
If you want the 1080/24p output, it should fulfill
below 3 conditions:
1.TV supports the 1080/24p display;
2.Player choose the 1080/24p option in the setup
menu;
3.Media must be the 1080/24p video.
Notes:
- This resolution becomes effective only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
• [HDMI 3D]
Turn on or off the 3D function.
{Auto} – Opening the 3D function of
player.
{Off} – Turn off the 3D function.
When you play a side by side 3D disc,
which is a kind of 3D disc and it is make
up of two frames, the player will playback
this disc and export the content based on
the TV's settings. So if you want to do
some settings, such as OSC or program,
please ensure that the 3D TV's setting is
correct.
Note:
If you do some 3D TV's setting during 3D disc
playback, the TV screen may be abnormal. To
recover, load the 3D TV's default setting first.
[Video Process]
Display Setting
TV
Video Adjust
More...
Video Process
Sharpness
Low
Move cursor key to select menu option
then use “OK ” key to select
English
• [Color Space]
Select a predefined Colour space of
picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – Select Full RGB Colour
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports Deep
Colour feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bits Colour.
Note:
- When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
{Off} – Disable 1080/24p video
resolution setting.
SETUP Exit
• [Video Adjust]
Select a predefined setting of the video.
1. Press OK.
2. Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press t/ to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - Press t/ to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue} - Press t/ to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation} - Press t/ to adjust the
saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
Change
RETURN Exit
• [Sharpness]
Select the level of sharpness: High,
Middle, Low.
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness.
level.
{Low} - Select Low sharpness level.
23
Audio Setting
English
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Audio Setting],
then press .
3. Select an option, press to access.
Audio Setting
Audio Output
Coaxial
PCM
HDMI
PCM
Down_samp
48K
Dolby DRC
Auto
Move cursor key to select menu option
then use “OK ” key to select
System Information
SETUP Exit
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
[Audio Output]
• [Coaxial]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{Off} – No output for Coaxial.
• [HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing.
{Re-encode} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{Off} – No output for HDMI.
• [Down_samp]
Select the digital audio signal sampling
frequency. (Only Coaxial)
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
{192K} – For discs recorded at sampling
rate of 192 kHz.
24
• [Dolby DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{Off} – Non-dynamic range compress.
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
The setting of Auto is effective for Dolby
TrueHD.
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [System
Information].
- The current software version and MAC
address(Ethernet and Wireless) will be
displayed.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
System Information
Software version: V XX
Ethernet MAC: E8-E0-B7-XX-XX-XX
Wireless MAC: XX-XX-XX-XX-XX-XX
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
Network Functional description
Media Server Search
With this player connected to network, you
can play video, music and photo files from
the server.
1. Connect this player to server network.
2. Press MC.
3. Select [Media Server Search], and press
OK.
»» All the connected shared servers/
folders are shown in the list (Max. 16).
4. Select a server, and press OK to open it.
5. Select a kind of media (Photo, Music,
Video) and press OK to open it.
6. Select a file or a folder to play or open
it. You can only see and play files
supported by both Windows Media player
and the Blu-ray DiscTM player.
• You may control play with the disc play
features.
Picasa
With this player, you can access, search
and view photos stored in your Picasa Web
Albums.
What you need to do:
• On your computer, visit www.picasa.com
to create an account with Picasa Web
Albums. You need to do this only once.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
3. Select [Picasa], and press OK.
»» The default Picasa page is displayed on
the TV screen.
4. Log into the Picasa Web Albums with
your Picasa web account.
• For the first time log in, select “New
User”.
• To enter your Username and Password,
press OK and the alphanumeric keys will
appear on the TV screen for your entries.
• To delete your created User Account,
press the red button on the remote
control.
5. Use the remote control to navigate to
select:
• My Photos: Display the photos stored in
your Picasa Web Albums.
• Featured: Display the featured photos
from Picasa website.
• Friends: Display the list of friends.
• Search: Search photos based on
keywords.
• Favorites: Display the favourite photos
from your Picasa Web Albums.
• Tag: Display the photos that have been
tagged in your Picasa Web Albums.
6. To exit the Picasa page, press RETURN.
Play a slideshow
1. Use the remote control to select “My
Photos” from the Picasa page, and press
OK.
»» The photos in your Picasa Web Albums
are displayed in thumbnails.
2. Select a photo, and press OK to view the
photo in full screen.
3. Press OK again to start a photo
slideshow.
4. During slideshow, press [OSC] to access
the following options, and then press OK
to select an option:
• Current playing: Display the index of the
current photo.
• Slideshow pause/play: Pause or play a
slideshow.
• Rotate: Rotate the current photo.
• Zoom: Zoom in or zoom out the photo.
• Effect: Select a slideshow effect.
• Speed: Select a slideshow speed.
• Add this Friend: Add the owner of the
current photo to the friends list.
5. To return to the previous screen, press
.
YouTube
With this player connected to the Internet,
you can browse, search and watch
YouTube videos.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
3. Select [YouTube], and press OK.
»» The default YouTube page is
displayed on the TV screen.
4. Use the remote control to navigate and
select options.
• To exit YouTube, press MC.
Note:
- If you do not press any button for few
seconds, the on-screen buttons and menu will
disappear.
BBC iPlayer
With this player connected to the Internet,
you can browse, search, watch BBC iPlayer
videos and listen to BBC iPlayer radio.
1. Connect this player to the Internet.
2. Press CONNECTED button in remote
control; or press MC, select [Connection],
and press OK.
3. Select [BBC iPlayer], and press OK.
»» The default BBC iPlayer page is
displayed on the TV screen.
4. Use the remote control to navigate and
select options.
• To exit BBC iPlayer, press RETURN.
25
English
Note:
- When using Media Server Search, you need to
setup the network server according to each server
Specification.
7 Specification
English
Playable media
This product can play:
• Blu-ray Disc™-Video, BD-R/RE2.0, BDAV
• DVD, DVD-Video, DVD+R/+RW,
DVD-R/-RW, DVD+R/-R DL (Dual Layer)
• Video CD/SVCD
• Audio CD, CD-R/CD-RW
• AVCHD
• USB flash drive
Video
Signal system: PAL/NTSC
HDMI Output: 480i/576i, 480p/576p,
720p, 1080i, 1080p, 1080/24p.
Audio
• Digital output (Coaxial):
0.5 Vp-p (75 ohm)
• HDMI output
LAN
• LAN terminal 10BASE-T/100BASE-TX
Wifi
• This player supports Double-frequency
2.4GHz and 5GHz wireless signal and all
frequency channel.
IEEE 802.11 a/b/g/n
Authentication Mode: WPAPSK, WPA2PSK
Encryption Type: WEP, TKIP, AES
USB
• USB 1.1 / USB 2.0 Full-speed / USB
2.0 High-speed
• Supporting range: USB Mass Storage
Class Device, TOSHIBA's USB Wi-Fi®
adapter (Model name: WLM-12EB1), 4
ports USB HUB, Card reader, Flash disk
• Supported file system: FAT32
• Maximum size supported: 1000GB
(HDD needs self-powered)
• Does not support unpowered HDD
Main Unit
• Power supply rating:
200V-240V 50/60Hz
• Power consumption: 15W
• Power consumption in standby mode
(Normal mode): <0.5W
26
• Power consumption in standby mode
(Quick Start mode): <5W
• Dimensions (w x h x d):
430 × 36 × 200(mm)
• Net Weight: 1.32 kg
• Operating temperature: 5°C to 35°C
• Operating humidity: Less than 80 %
(no condensation)
Accessories supplied
• Remote control
• One R03 (AAA size) battery
• Simple IB
Compatible file formats
MP3 tracks
• Supported file extension: '.mp3'
• Supported audio codec : MP3
• ISO format
• Supported corresponding bitrate: 8kbps320 kbps
• Supported sampling frequencies: 32kHz,
44.1kHz, 48kHz
JPEG
• Supported file extension: '.jpg' or ‘.jpeg'
• JPEG/ISO format
• Does not support Picture CD
MKV
• Supported file extensions: '.MKV'
• Supported video codecs: H264 MP/ HP,
DivX, MPEG4 SP/ ASP, MPEG1, MPEG2
• Supported audio codecs: AAC 2ch &
5.1ch, MP3, AC3, DTS, LPCM
• Supported subtitles: Text/UTF8, SSA,
SMI, SUB, SRT, ASS
• Playback of MKV files in CD-R/RW may
not be compatible
• Some MKV format discs may not play,
depending on the video resolution and
frame rate condition
Other formats
• MP4 ('.mp4', '.mov'), AVI ('.avi'), MPEG
('.mpg', '.mpeg')
8 Troubleshooting
Problem
Tip
No reaction to the
remote control.
Connect the product to the power outlet.
English
If you experience any of the following difficulties while using this unit, check the list below
before consulting your nearest TOSHIBA dealer.
Point the remote control at the product.
Insert the battery correctly.
Insert new battery in the remote control.
No video signal on the
display device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution.
Set TV System of TV correctly.
Incorrect or no audio /
video signal on the
amplifier/display device
via HDMI cable.
If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.
No high-definition video
signal on the TV.
Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
Ensure the amplifier/display devices setting match the Blu-ray
Disc™ player.
Does the TV support high-definition video? High-definition video
is not available when the TV does not support it.
No audio signal from the
loudspeakers of the
audio system.
Turn on the audio system.
No 3D effectiveness
Set HDMI 3D to Auto.
Set the audio system to the correct external input.
Increase the volume level of the audio system.
Connecting by HDMI cable.
Connecting to a 3D TV.
Playback a 3D disc.
Wear 3D glasses.
Cannot play back a disc.
Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean the disc.
Cannot play back JPEG
files from a disc.
Make sure that the disc was recorded in the JPEG/ISO format.
27
Cannot play MP3 files
from a disc.
Make sure that the disc was recorded in the ISO format.
English
Make sure that the bitrate of the MP3 files is between 8 and 320
kbps.
Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz or 48kHz.
Cannot find a JPEG file.
Make sure that the selected group (folder) does not contain
more than 9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find a MP3 file.
Make sure that the selected folder does not contain more than
9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3.
Cannot upgrade SW.
When you upgrade the system with USB flash drive, you should
make a new folder named UPG_ALL, and copy the upgrade file
into this folder.
When you upgrade the system by network, please make sure
the player is connected to the internet when upgrading the SW.
Sometimes the options
of setup menu cannot
be selected.
28
When playing a DVD disc or Blu-ray Disc™, press STOP
button once, the player will go into stop resume mode,
meanwhile you cannot change some settings in setup menu
such as language subitem menu, audio, subtitle etc.
If you want to change that, press STOP button twice, the
player will go into full stop mode, then you can do it.
Aspect ratio
Aspect ratio refers to the length to height
ratio of TV screens. The ratio of a standard
TV is 4:3, while the ratio of a high
definition or wide TV is 16:9. The letterbox
allows you to enjoy a picture with a wider
perspective on a standard 4:3 screen.
AVCHD™
AVCHD™ is a new format for high
definition video camcorders which can
record and play high-resolution HD images.
AVI
Audio Video Interleave, known by its
acronym AVI, is a multimedia container
ormat. AVI files can contain both audio and
video data in a file container that allows
synchronous audio-with-video playback.
Chapter
Just as a book is split up into several
chapters, a title on a Blu-ray Disc™-video
or DVD-video is usually divided into
chapters.
Digital Audio
Digital Audio is a sound signal that has
been converted into numerical values.
Digital sound can be transmitted through
multiple channels. Analogue sound can
only be transmitted through two channels.
Dolby® Digital
The system to compress digital sound
developed by Dolby Laboratories. It offers
you sound of stereo (2ch) or multichannel
audio.
BD-Java™
With some Blu-ray Disc™ which support
Java™ applications, you can enjoy the
interactive functions such as games or
interactive menus.
Dolby® Digital Plus
Dolby Digital Plus is the next generation
digital audio compression technology
developed as an extension to Dolby Digital.
Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
BD-Live™
BD-Live™ is a BD-video (BD-ROM version 2
Profile 2.0/ Profile 1.1) which contains new
functions (e.g. Internet connection), in
addition to the BONUSVIEW™ function.
Dolby® TrueHD
Dolby TrueHD is a lossless coding
technology developed for next generation
optical discs. Blu-ray DiscTM supports 7.1
multi-channel surround sound output.
Blu-ray 3D™
Blu-ray 3D™ is a BD-video (BD-ROM
version 3 Profi le 5.0) which contains 3D
view function, in addition to the BD-Live/
BONUSVIEW function.
DTS®
DTS is a multi-channel surround sound
system. By connecting to DTS decoder,
you can enjoy movie dynamic and realistic
sound like movie theater. DTS surround
sound technologies were developed by
DTS, Inc.
Blu-ray DiscTM
Blu-ray DiscTM is a next generation optical
video disc capable of storing five times
more data than a conventional DVD. The
large capacity makes it possible to benefit
from the features such as high-definition
videos, multichannel surround sound,
interactive menus and so on.
BONUSVIEWTM
This is a Blu-ray DiscTM-Video (Final
Standard Profile or Profile 1.1) that
supports interactive content encoded on
the disc, such as picture-in-picture. This
means you can play the primary video and
secondary video simultaneously.
DTS-HD®
DTS-HD is a lossless coding technology
developed as an extension of the original
DTS Coherent Acoustics format.
Blu-ray Disc™ supports 7.1 multi-channel
surround sound output.
DTS-HD Master AudioTM
A disc encoded with DTS-HD Master Audio
delivers ALL of the information from the
original master recording — bit-for-bit, it's
identical to what the sound engineers laid
down. Audio doesn't get any better than
this.
29
English
9 Glossary
English
HDCP
High-bandwidth Digital Content Protection.
This is a specification that provides a
secure transmission of digital contents
between different devices (to prevent
unauthorized copyright.)
HDMI®
High-Definition Multimedia Interface
(HDMI) is a high-speed digital interface
that can transmit uncompressed high
definition video and digital multichannel
audio. It delivers high quality picture and
sound quality. HDMI is fully backward
compatible with DVI. As required by the
HDMI standard, connecting to HDMI or
DVI products without HDCP (High
bandwidth Digital Content Protection) will
result in no Video or Audio output.
IP Address
A set of numbers which are assigned to
devices participating in a computer
network.
JPEG
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in
image quality in spite of its high
compression ratio. Files are recognized by
their file extension ‘.jpg’ or ‘.jpeg’.
LAN (Local Area Network)
A group of linked devices in a company,
school or home. Indicates the boundaries
of a particular network.
Local storage
This storage area is used as destination for
storing additional contents from BD-Live™
enabled Blu-ray Disc™-Video.
MKV
The Matroska Multimedia Container is an
open standard free container format, a file
format that can hold an unlimited number
of video, audio, picture or subtitle tracks
inside a single file. It is intended to serve as
a universal format for storing common
multimedia content, like movies or TV
shows.
30
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With
the MP3 format, one CD-R or CD-RW can
contain about 10 times more data than a
regular CD.
MP4
MP4 file format is a multimedia container
format standard specified as a part of
MPEG-4. It is most commonly used to store
digital video and digital audio streams,
especially those defined by MPEG (MPEG4,
H264…) but can also be used to store other
data such as subtitles and still images.
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD
with on-screen menus that are recorded
onto the disc. You can enjoy interactive
playback and search.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Region code
A system that allows discs to be played
only in the region designated. This unit
only plays discs that have compatible
region codes. You can find the region code
of your unit on the product label. Some
discs are compatible with more than one
region (or ALL regions).
Sampling Frequency
The rate which sound is measured by a
specified interval to turn into digital audio
data. The numbers of sampling in one
second defines as sampling frequency. The
higher the rate, the better the sound
quality.
Title
A collection of chapters on Blu-ray Disc™video or DVD-video.
Track
Audio CD use tracks to divide up the
content of a disc. The Blu-ray Disc™-video
or DVD-video equivalent is called a
chapter. See also “Chapter”.
Wi-Fi
Wi-Fi or Wifi, is a mechanism for wirelessly
connecting electronic devices.
The software pre-installed in this product consists of multiple, independent software components. Each software
component is copyrighted by a third party. This product uses software components that are distributed as freeware
under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
Some EULAs require that the source code of the applicable component be disclosed as the condition for distributing
the software component in executable format. You can check the software components subject to such EULA
requirements on the following e-mail address:
E-mail address: [email protected]
TOSHIBA provides a warranty for this product you have purchased under conditions set forth by TOSHIBA.
However, some of the software components distributed under an EULA are made available for use by the user
on the assumption that they are not copyrighted or warranted by a third party. These software components are
licensed to the user free of charge and therefore not covered by any warranty within the scope of the applicable
laws. These software components are not subject to any copyrights or other third-party rights and are provided in
“as is” condition without any warranty, whether express or implied. “Warranty” here includes, but not limited to, an
implied warranty for marketability or fitness for specific uses. All risks associated with the quality or performance
of these software components are assumed by the user. TOSHIBA shall not be liable whatsoever for any cost of
repair or correction or other incidental expense incurred in connection with a defect found in any of these software
components. Unless specified under the applicable laws or in a written agreement, a party who changes or
redistributes the software with consent from the copyright holders or based on the aforementioned licenses shall
not be held liable whatsoever for any loss arising from the use of or inability to use such software components.
The same applies even when the copyright holders or relevant third parties have been informed of the possibility of
such loss. “Loss” here includes normal, special, incidental and indirect loss (including, but not limited to, the loss of
data or its accuracy; loss incurred by the user or any third party; and interface incompatibility with other software).
Please read each EULA for details on the use conditions and items that must be observed regarding these software
components.
The table below lists the software components pre-installed in this product, which are subject to EULAs. The user
should read the applicable EULAs carefully before using these software components. The EULAs are exhibited in
their original text (English) as exactly written by the respective parties.
Project name
Project license
Linux kernel
GPLv2
gcc libgcc
GPLv3.txt and gcc-exception.txt (GPLv3 with GCC Runtime
Library Exception)
gcc libstdc++
GPLv3.txt and gcc-exception.txt (GPLv3 with GCC Runtime
Library Exception)
glibc
LGPLv2.1
glibc (other licenses)
glibc2.9_LICENSE.txt
SquashFS
GPLv2
iputils
GPLv2
udhcpc
GPLv2
net-tools
GPLv2
sysvinit
GPLv2
module-init-tools
GPLv2
util-linux-ng
GPLv2
procps (ps, top)
LGPLv2
psmisc
GPLv2
coreutils
GPLv2
gawk
GPLv2
grep
GPLv2
findutils
GPLv2
bash
GPLv2
tar
GPLv2
sed
GPLv2
31
English
License Information on the Software Used in This Product
This document is statement purpose only. Not concerned with operation of this
product.
English
gzip
GPLv2
inetutils
GPLv2
ncurses
ncurses.txt
gdb (gdbserver)
GPLv2
Das U-Boot
GPLv2
International Components for Unicode
ICULicense.txt
OpenSSL
openssl.txt
zlib
zlib.txt
FreeType
FreeType.txt
Expat
expat.txt
libcurl
libcurl.txt
libjpeg
libjpeg-7.txt
c-ares
c-arse.txt
mtd-utils
GPLv2
libmtp
LGPLv2.1
libusb
LGPLv2.1
libusb-compat
LGPLv2.1
WPA Supplicant
WPASupplicant.txt
WPA Supplicant (WPS)
WPASupplicant.txt
Wireless Tools
GPLv2
DirectFB
LGPLv2.1
Fusion
GPLv2
SaWMan
LGPLv2.1
libpng
libpng.txt
libxml2
libxml.txt (MIT License)
tinyxml
tinyxml.txt
David M. Gay's dtoa and strtod
DMG's dtoa and strtod.txt
Bison generated parser
bison_parser.txt
Doug Lea's malloc
dmalloc.txt
EMX sprintf and scanf
EMX_sprintf_sscanf.txt
msdl
GPLv2
JSON_Parser
JSON_Parser.txt
GNU GPLv2
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away
your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom
to share and change free software--to make sure the software
is free for all its users. This General Public License applies
to most of the Free Software Foundation's software and to
any other program whose authors commit to using it. (Some
other Free Software Foundation software is covered by the
GNU Lesser General Public License instead.) You can apply it
to your programs, too.
32
When we speak of free software, we are referring to freedom,
not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free
software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can
change the software or use pieces of it in new free programs;
and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must give the recipients all
the rights that you have. You must make sure that they, too,
receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the
software, and (2) offer you this license which gives you legal
Also, for each author's protection and ours, we want to make
certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else
and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by
others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect
making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone's
free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
0. This License applies to any program or other work which
contains a notice placed by the copyright holder saying it may
be distributed under the terms of this General Public License.
The "Program", below, refers to any such program or work,
and a "work based on the Program" means either the Program
or any derivative work under copyright law: that is to say, a
work containing the Program or a portion of it, either verbatim
or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the
term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are
not covered by this License; they are outside its scope. The act
of running the Program is not restricted, and the output from
the Program is covered only if its contents constitute a work
based on the Program (independent of having been made by
running the Program). Whether that is true depends on what
the Program does.
1. You may copy and distribute verbatim copies of the
Program's source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on
each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License
and to the absence of any warranty;and give any other
recipients of the Program a copy of this License along with
the Program.
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Program or
any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the
terms of Section 1 above, provided that you also meet all of
these conditions:
a) You must cause the modified files to carry prominent
notices stating that you changed the files and the date of any
change.
b) You must cause any work that you distribute or publish,
that in whole or in part contains or is derived from the Program
or any part thereof, to be licensed as a whole at no charge to
all third parties under the terms of this License.
c) If the modified program normally reads commands
interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to
print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may
redistribute the program under these conditions, and telling
the user how to view a copy of this License. (Exception: if
the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not
required to print an announcement.)
These requirements apply to the modified work as a whole.
If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections
as part of a whole which is a work based on the Program,
the distribution of the whole must be on the terms of this
License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of
who wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of
derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on
the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based
on it, under Section 2) in object code or executable form under
the terms of Sections 1 and 2 above provided that you also do
one of the following:
a) Accompany it with the complete corresponding machinereadable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used
for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to
be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the
offer to distribute corresponding source code. (This alternative
is allowed only for non-commercial distribution and only if you
received the program in object code or executable form with
such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of
the work for making modifications to it. For an executable
work, complete source code means all the source code for all
modules it contains, plus any associated interface definition
files, plus the scripts used to control compilation and installation
of the executable. However, as a special exception, the source
code distributed need not include anything that is normally
distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by
offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place
counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the
object code.
4. You may not copy, modify, sublicense, or distribute the
Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute
the Program is void, and will automatically terminate your
rights under this License. However, parties who have received
copies, or rights, from you under this License will not have
their licenses terminated so long as such parties remain in full
compliance.
33
English
permission to copy, distribute and/or modify the software.
English
5. You are not required to accept this License, since you have
not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These
actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any
work based on the Program), you indicate your acceptance
of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based
on it.
6. Each time you redistribute the Program (or any work based
on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the
Program subject to these terms and conditions. You may not
impose any further restrictions on the recipients' exercise of
the rights granted herein. You are not responsible for enforcing
compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court
order, agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously
your obligations under this License and any other pertinent
obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not
permit royalty-free redistribution of the Program by all those
who receive copies directly or indirectly through you, then the
only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to
apply in other circumstances.
It is not the purpose of this section to induce you to infringe
any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose
of protecting the integrity of the free software distribution
system, which is implemented by public license practices.
Many people have made generous contributions to the wide
range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that
choice.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only
in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of
this License.
9. The Free Software Foundation may publish revised and/
or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If
the Program specifies a version number of this License which
applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of
any later version published by the Free Software Foundation.
If the Program does not specify a version number of this
License, you may choose any version ever published by the
Free Software Foundation.
34
10. If you wish to incorporate parts of the Program into other
free programs whose distribution conditions are different, write
to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the
Free Software Foundation; we sometimes make exceptions for
this. Our decision will be guided by the two goals of preserving
the free status of all derivatives of our free software and of
promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
LGPLv2.1
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of
this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also
counts as the successor of the GNU Library Public License,
version 2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public Licenses are intended to guarantee your freedom to
share and change free software--to make sure the software is
free for all its users.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of
the Free Software Foundation and other authors who decide
to use it. You can use it too, but we suggest you first think
carefully about whether this license or the ordinary General
Public License is the better strategy to use in any particular
case, based on the explanations below.
When we speak of free software, we are referring to freedom
of use, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of
free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs;
and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that
forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain
the wherewithal to run that program using a modified version
of the Library.
For example, if you distribute copies of the library, whether
gratis or for a fee, you must give the recipients all the rights
that we gave you. You must make sure that they, too, receive
or can get the source code. If you link other code with the
library, you must provide complete object files to the recipients,
so that they can relink them with the library after making
changes to the library and recompiling it. And you must show
them these terms so they know their rights.
We protect your rights with a two-step method: (1) we
copyright the library, and (2) we offer you this license, which
gives you legal permission to copy, distribute and/or modify the
library.
The precise terms and conditions for copying, distribution
and modification follow. Pay close attention to the difference
between a "work based on the library" and a "work that uses
the library". The former contains code derived from the library,
whereas the latter must be combined with the library in order
to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library or
other program which contains a notice placed by the copyright
holder or other authorized party saying it may be distributed
under the terms of this Lesser General Public License (also
called "this License"). Each licensee is addressed as "you".
To protect each distributor, we want to make it very clear that
there is no warranty for the free library. Also, if the library is
modified by someone else and passed on, the recipients should
know that what they have is not the original version, so that
the original author's reputation will not be affected by problems
that might be introduced by others.
A "library" means a collection of software functions and/or
data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form
executables.
Finally, software patents pose a constant threat to the existence
of any free program. We wish to make sure that a company
cannot effectively restrict the users of a free program by
obtaining a restrictive license from a patent holder. Therefore,
we insist that any patent license obtained for a version of the
library must be consistent with the full freedom of use specified
in this license.
The "Library", below, refers to any such software library or
work which has been distributed under these terms. A "work
based on the Library" means either the Library or any derivative
work under copyright law: that is to say, a work containing the
Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the
term "modification".)
Most GNU software, including some libraries, is covered by
the ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated
libraries, and is quite different from the ordinary General Public
License. We use this license for certain libraries in order to
permit linking those libraries into non-free programs.
"Source code" for a work means the preferred form of the work
for making modifications to it. For a library, complete source
code means all the source code for all modules it contains, plus
any associated interface definition files, plus the scripts used to
control compilation and installation of the library.
When a program is linked with a library, whether statically
or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library.
The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom.
The Lesser General Public License permits more lax criteria for
linking other code with the library.
Activities other than copying, distribution and modification are
not covered by this License; they are outside its scope. The
act of running a program using the Library is not restricted,
and output from such a program is covered only if its contents
constitute a work based on the Library (independent of the
use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that
uses the Library does.
We call this license the "Lesser" General Public License
because it does Less to protect the user's freedom than the
ordinary General Public License. It also provides other free
software developers Less of an advantage over competing
non-free programs. These disadvantages are the reason we
use the ordinary General Public License for many libraries.
However, the Lesser license provides advantages in certain
special circumstances.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on
each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License
and to the absence of any warranty; and distribute a copy of
this License along with the Library. For example, on rare occasions, there may be a special need
to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free
programs must be allowed to use the library. A more frequent
case is that a free library does the same job as widely used
non-free libraries.
In this case, there is little to gain by limiting the free library to
free software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free
programs enables a greater number of people to use a large
body of free software. For example, permission to use the GNU
C Library in non-free programs enables many more people to
use the whole GNU operating system, as well as its variant, the
GNU/Linux operating system.
Although the Lesser General Public License is Less protective
of the users' freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.
2. You may modify your copy or copies of the Library or any
portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms
of Section 1 above, provided that you also meet all of these
conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent
notices stating that you changed the files and the date of any
change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
35
English
responsibilities for you if you distribute copies of the library or
if you modify it.
English
is invoked, then you must make a good faith effort to ensure
that, in the event an application does not supply such function
or table, the facility still operates, and performs whatever part
of its purpose remains meaningful.
(For example, a function in a library to compute square roots
has a purpose that is entirely well-defined independent of
the application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function
must be optional: if the application does not supply it, the
square root function must still compute square roots.)
These requirements apply to the modified work as a whole.
If identifiable sections of that work are not derived from the
Library, and can be reasonably considered independent and
separate works in themselves, then this License, and its terms,
do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections
as part of a whole which is a work based on the Library, the
distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who
wrote it.
Thus, it is not the intent of this section to claim rights or
contest your rights to work written entirely by you; rather,
the intent is to exercise the right to control the distribution of
derivative or collective works based on the Library.
In addition, mere aggregation of another work not based
on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU
General Public License instead of this License to a given copy
of the Library.
To do this, you must alter all the notices that refer to this
License, so that they refer to the ordinary GNU General Public
License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has
appeared, then you can specify that version instead if you
wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies
to all subsequent copies and derivative works made from that
copy.
This option is useful when you wish to copy part of the code
of the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that
you accompany it with the complete corresponding machinereadable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used
for software interchange.
If distribution of object code is made by offering access to
copy from a designated place, then offering equivalent access
to copy the source code from the same place satisfies the
requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the
object code.
5. A program that contains no derivative of any portion of
the Library, but is designed to work with the Library by being
compiled or linked with it, is called a "work that uses the
Library". Such a work, in isolation, is not a derivative work
of the Library, and therefore falls outside the scope of this
License.
36
However, linking a "work that uses the Library" with the
Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than
a "work that uses the library". The executable is therefore
covered by this License. Section 6 states terms for distribution
of such executables.
When a "work that uses the Library" uses material from a
header file that is part of the Library, the object code for the
work may be a derivative work of the Library even though the
source code is not. Whether this is true is especially significant
if the work can be linked without the Library, or if the work is
itself a library. The threshold for this to be true is not precisely
defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small
inline functions (ten lines or less in length), then the use of the
object file is unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this object code plus
portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of
Section 6.Any executables containing that work also fall under
Section 6, whether or not they are linked directly with the
Library itself.
6. As an exception to the Sections above, you may also
combine or link a "work that uses the Library" with the Library to
produce a work containing portions of the Library, and distribute
that work under terms of your choice, provided that the terms
permit modification of the work for the customer's own use and
reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work
that the Library is used in it and that the Library and its use
are covered by this License. You must supply a copy of this
License. If the work during execution displays copyright
notices, you must include the copyright notice for the Library
among them, as well as a reference directing the user to the
copy of this License. Also, you must do one of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including
whatever changes were used in the work (which must be
distributed under Sections 1 and 2 above); and, if the work
is an executable linked with the Library, with the complete
machine-readable "work that uses the Library", as object code
and/or source code, so that the user can modify the Library
and then relink to produce a modified executable containing
the modified Library. (It is understood that the user who
changes the contents of definitions files in the Library will not
necessarily be able to recompile the application to use the
modified definitions.)
b) Use a suitable shared library mechanism for linking with
the Library. A suitable mechanism is one that (1) uses at
run time a copy of the library already present on the user's
computer system, rather than copying library functions into
the executable, and (2) will operate properly with a modified
version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that
the work was made with.
c) Accompany the work with a written offer, valid for at least
three years, to give the same user the materials specified in
Subsection 6a, above, for a charge no more than the cost of
performing this distribution.
d) If distribution of the work is made by offering access to
copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy. For
an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed
for reproducing the executable from it. However, as a special
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means
you cannot use both them and the Library together in an
executable that you distribute.
7. You may place library facilities that are a work based on
the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such
a combined library, provided that the separate distribution of
the work based on the Library and of the other library facilities
is otherwise permitted, and provided that you do these two
things: a) Accompany the combined library with a copy of the same
work based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same
work.
8. You may not copy, modify, sublicense, link with, or
distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense,
link with, or distribute the Library is void, and will automatically
terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License
will not have their licenses terminated so long as such parties
remain in full compliance.
9. You are not required to accept this License, since you have
not signed it. However, nothing else grants you permission to
modify or distribute the Library or its derivative works. These
actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Library (or any work
based on the Library), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying,
distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based
on the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or modify
the Library subject to these terms and conditions. You may not
impose any further restrictions on the recipients' exercise of
the rights granted herein. You are not responsible for enforcing
compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation
of patent infringement or for any other reason (not limited
to patent issues), conditions are imposed on you (whether
by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the
conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a
patent license would not permit royalty-free redistribution of
the Library by all those who receive copies directly or indirectly
through you, then the only way you could satisfy both it and
this License would be to refrain entirely from distribution of the
Library. If any portion of this section is held invalid or unenforceable
under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to
apply in other circumstances.
It is not the purpose of this section to induce you to infringe
any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose
of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many
people have made generous contributions to the wide range
of software distributed through that system in reliance on
consistent application of that system; it is up to the author/
donor to decide if he or she is willing to distribute software
through any other system and a licensee cannot impose that
choice.
This section is intended to make thoroughly clear what is
believed to be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Library under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only
in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of
this License.
13. The Free Software Foundation may publish revised and/or
new versions of the Lesser General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If
the Library specifies a version number of this License which
applies to it and "any later version", you have the option of
following the terms and conditions either of that version or of
any later version published by the Free Software Foundation.
If the Library does not specify a license version number, you
may choose any version ever published by the Free Software
Foundation.
14. If you wish to incorporate parts of the Library into other
free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For
software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two
goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY
AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD
THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE
THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH
ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
37
English
exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on)
of the operating system on which the executable runs, unless
that component itself accompanies the executable.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
English
Copyright (c) 1995-2011 International Business Machines
Corporation and others
All rights reserved.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, and/or sell copies of the Software,
and to permit persons to whom the Software is furnished to
do so, provided that the above copyright notice(s) and this
permission notice appear in all copies of the Software and that
both the above copyright notice(s) and this permission notice
appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT
HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE
LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR
CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name of a copyright
holder shall not be used in advertising or otherwise to promote
the sale, use or other dealings in this Software without prior
written authorization of the copyright holder.
openssl
LICENSE ISSUES
The OpenSSL toolkit stays under a dual license, i.e. both
the conditions of the OpenSSL License and the original SSLeay
license apply to the toolkit. See below for the actual license
texts. Actually both licenses are BSD-style Open Source
licenses. In case of any license issues related to OpenSSL
please contact [email protected].
OpenSSL License
Copyright (c) 1998-2008 The OpenSSL Project. All rights
reserved.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
5. Products derived from this software may not be called
"OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the
following acknowledgment: "This product includes software
developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)"
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
"AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric
Young ([email protected]). This product includes software
written by Tim Hudson ([email protected]).
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
This package is an SSL implementation written by Eric Young
([email protected]). The implementation was written so as to
conform with Netscapes SSL.
This library is free for commercial and non-commercial use as
long as the following conditions are adhered to. The following
conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The
SSL documentation included with this distribution is covered by
the same copyright terms except that the holder is Tim Hudson
([email protected]).
Copyright remains Eric Young's, and as such any Copyright
notices in the code are not to be removed. If this package
is used in a product, Eric Young should be given attribution
as the author of the parts of the library used. This can be
in the form of a textual message at program startup or in
documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. All advertising materials mentioning features or use of this
software must display the following acknowledgment:"This
product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
3. All advertising materials mentioning features or use of this
software must display the following acknowledgement: "This
product includes cryptographic software written by Eric Young
([email protected])" The word 'cryptographic' can be left out
if the routines from the library being used are not cryptographic
related :-).
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must
not be used to endorse or promote products derived from
this software without prior written permission. For written
permission, please contact [email protected].
4. If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you must
include an acknowledgement: "This product includes software
written by Tim Hudson ([email protected])"
38
The licence and distribution terms for any publically available
version or derivative of this code cannot be changed. i.e.
this code cannot simply be copied and put under another
distribution licence [including the GNU Public Licence.]
zlib
zlib.h -- interface of the 'zlib' general purpose compression
library
version 1.2.3, July 18th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or
implied warranty. In no event will the authors be held liable for
any damages arising from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you
must not claim that you wrote the original software. If you use
this software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
The FreeType Project LICENSE
2006-Jan-27
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm,
and Werner Lemberg
Introduction
============
The FreeType Project is distributed in several archive
packages; some of them may contain, in addition to the
FreeType font engine,various tools and contributions which
rely on, or relate to, the FreeType Project.
This license applies to all files found in such packages,
and which do not fall under their own explicit license. The
license affects thus the FreeType font engine, the test
programs,documentation and makefiles, at the very least.
This license was inspired by the BSD, Artistic, and
IJG (Independent JPEG Group) licenses, which all encourage
inclusion and use of free software in commercial and
freeware products alike. As a consequence, its main points
are that:
We don't promise that this software works. However, we will
be interested in any kind of bug reports. (`as is' distribution)
You can use this software for whatever you want, in parts or
full form, without having to pay us. (`royalty-free' usage)
You may not pretend that you wrote this software. If you
use it, or only parts of it, in a program, you must acknowledge
somewhere in your documentation that you have used the
FreeType code. (`credits')
We specifically permit and encourage the inclusion of
this software, with or without modifications, in commercial
products. We disclaim all warranties covering The FreeType
Project and assume no liability related to The FreeType
Project.
Finally, many people asked us for a preferred form for
a credit/disclaimer to use in compliance with this license. We
thus encourage you to use the following text:
"""
Portions of this software are copyright © <year> The
FreeType Project (www.freetype.org). All rights reserved.
"""
Please replace <year> with the value from the FreeType
version you actually use.
Legal Terms
===========
0. Definitions
Throughout this license, the terms `package', `FreeType
Project', and `FreeType archive' refer to the set of files
originally distributed by the authors (David Turner, Robert
Wilhelm, and Werner Lemberg) as the `FreeType Project', be
they named as alpha, beta or final release.
`You' refers to the licensee, or person using the project,
where`using' is a generic term including compiling the project's
source code as well as linking it to form a `program' or
`executable'.
This program is referred to as `a program using the
FreeType engine'.
This license applies to all files distributed in the original
FreeType Project, including all source code, binaries and
documentation, unless otherwise stated in the file in its
original, unmodified form as
distributed in the original
archive.
If you are unsure whether or not a particular file is covered
by this license, you must contact us to verify this.
The FreeType Project is copyright (C) 1996-2000 by David
Turner, Robert Wilhelm, and Werner Lemberg. All rights
reserved except as specified below.
1. No Warranty
THE FREETYPE PROJECT IS PROVIDED `AS IS' WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE
FOR ANY DAMAGES
CAUSED BY THE USE OR THE INABILITY TO USE, OF THE
FREETYPE PROJECT.
2. Redistribution
This license
and irrevocable
compile,display,
and sublicense
grants a worldwide, royalty-free, perpetual
right and license to use, execute, perform,
copy, create derivative works of, distribute
the FreeType Project (in both source and
39
English
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS''
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
object code forms) and derivative works thereof for any
purpose; and to authorize others to exercise some or all of
the rights granted herein, subject to the following conditions:
English
Redistribution of source code must retain this license
file (`FTL.TXT') unaltered; any
additions, deletions or
changes to the original files must be clearly indicated in
accompanying documentation. The copyright notices of the
unaltered,original files must be preserved in all copies of
source files.
Redistribution in binary form must provide a disclaimer
that states that the software is based in part of the work of
the FreeType Team, in the distribution documentation. We
also encourage you to put an URL to the FreeType web page in
your documentation, though this isn't mandatory.
These conditions apply to any software derived from or
based on the FreeType Project, not just the unmodified files. If
you use our work, you must acknowledge us. However, no fee
need be paid to us.
3. Advertising
Neither the FreeType authors and contributors nor you
shall use the name of the other for commercial, advertising,
or promotional purposes without specific prior written
permission.
We suggest, but do not require, that you use one or
more of the following phrases to refer to this software in
your documentation or advertising materials: `FreeType
Project', `FreeType Engine', `FreeType library', or `FreeType
Distribution'.
As you have not signed this license, you are not required to
accept it. However, as the FreeType Project is copyrighted
material, only this license, or another one contracted with the
authors, grants you the right to use, distribute, and modify
it.
Therefore, by using, distributing, or modifying the
FreeType Project, you indicate that you understand and accept
all the terms of this license.
4. Contacts
There are two mailing lists related to FreeType:
[email protected]
Discusses general use and applications of FreeType, as well
as future and wanted additions to the library and distribution.
If you are looking for support, start in this list if you haven’t
found anything to help you in the documentation.
[email protected]
Discusses bugs, as well as engine internals, design issues,
specific licenses, porting, etc.
the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
curl
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2011, Daniel Stenberg, <daniel@haxx.
se>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for
any purpose with or without fee is hereby granted, provided
that the above copyright notice and this permission notice
appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS
OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright
holder shall not
be used in advertising or otherwise to promote the sale, use
or other dealings
in this Software without prior written authorization of the
copyright holder.
libjpeg-7
1. We don't promise that this software works. (But if you find
any bugs,please let us know!)
2. You can use this software for whatever you want. You don't
have to pay us.
3. You may not pretend that you wrote this software. If you
use it in a program, you must acknowledge somewhere in your
documentation that you've used the IJG code.
Our home page can be found at
In legalese:
http://www.freetype.org
The authors make NO WARRANTY or representation, either
express or implied,with respect to this software, its quality,
accuracy, merchantability, or fitness for a particular purpose.
This software is provided "AS IS", and you, its user, assume the
entire risk as to its quality and accuracy.
Expat
Copyright (c) 1998, 1999, 2000 Thai Open Source Software
Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat
maintainers.
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the Software), to deal in the Software without restriction,
including without limitation the rights to use, copy, modify,
merge, publish, distribute, sublicense, and/or sell copies of
40
This software is copyright (C) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and
distribute this software (or portions thereof) for any purpose,
without fee, subject to these conditions:
GPLv3
GNU GENERAL PUBLIC LICENSE
These conditions apply to any software derived from or based
on the IJG code, not just to the unmodified library. If you use
our work, you ought to acknowledge us.
The GNU General Public License is a free, copyleft license for
software and other kinds of works.
Permission is NOT granted for the use of any IJG author's name
or company name in advertising or publicity relating to this
software or products derived from it. This software may be
referred to only as "the Independent JPEG Group's software".
We specifically permit and encourage the use of this software
as the basis of commercial products, provided that all warranty
or liability claims are assumed by the product vendor.
ansi2knr.c is included in this distribution by permission of L.
Peter Deutsch, sole proprietor of its copyright holder, Aladdin
Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered
by the above copyright and conditions, but instead by the
usual distribution terms of the Free Software Foundation;
principally,that you must include source code if you redistribute
it. (See the file ansi2knr.c for full details.) However, since
ansi2knr.c is not needed as part of any program generated from
the IJG code, this does not limit you more than the foregoing
paragraphs do.
The Unix configuration script "configure" was produced with
GNU Autoconf. It is copyright by the Free Software Foundation
but is freely distributable. The same holds for its supporting
scripts (config.guess, config.sub,ltconfig, ltmain.sh). Another
support script, install-sh, is copyright by X Consortium. but is
also freely distributable.
The IJG distribution formerly included code to read and write
GIF files. To avoid entanglement with the Unisys LZW patent,
GIF reading support has been removed altogether, and the GIF
writer has been simplified to produce uncompressed GIFs. This
technique does not use the LZW algorithm; the resulting GIF
files are larger than usual, but are readable by all standard
GIF decoders.
We are required to state that "The Graphics Interchange Format(c)
is the Copyright property of CompuServe Incorporated. GIF(sm)
is a Service Mark property of CompuServe Incorporated."
c-ares
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software
and its documentation for any purpose and without fee is
hereby granted, provided that the above copyright notice
appear in all copies and that both that copyright notice and this
permission notice appear in supporting documentation, and
that the name of M.I.T. not be used in advertising or publicity
pertaining to distribution of the software without specific,
written prior permission. M.I.T. makes no representations
about the suitability of this software for any purpose. It is
provided "as is" without express or implied warranty.
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <http://
fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software and other practical works are
designed to take away your freedom to share and change the
works. By contrast, the GNU General Public License is intended
to guarantee your freedom to share and change all versions
of a program--to make sure it remains free software for all its
users. We, the Free Software Foundation, use the GNU General
Public License for most of our software; it applies also to any
other work released this way by its authors. You can apply it
to your programs, too.
When we speak of free software, we are referring to freedom,
not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free
software (and charge for them if you wish), that you receive
source code or can get it if you want it, that you can change
the software or use pieces of it in new free programs, and that
you know you can do these things.
To protect your rights, we need to prevent others from
denying you these rights or asking you to surrender the rights.
Therefore, you have certain responsibilities if you distribute
copies of the software, or if you modify it: responsibilities to
respect the freedom of others.
For example, if you distribute copies of such a program,
whether gratis or for a fee, you must pass on to the recipients
the same freedoms that you received. You must make sure
that they, too, receive or can get the source code. And you
must show them these terms so they know their rights.
Developers that use the GNU GPL protect your rights with
two steps: (1) assert copyright on the software, and (2) offer
you this License giving you legal permission to copy, distribute
and/or modify it.
For the developers' and authors' protection, the GPL clearly
explains that there is no warranty for this free software. For
both users' and authors' sake, the GPL requires that modified
versions be marked as changed, so that their problems will not
be attributed erroneously to authors of previous versions.
Some devices are designed to deny users access to install or
run modified versions of the software inside them, although the
manufacturer can do so. This is fundamentally incompatible with
the aim of protecting users' freedom to change the software.
The systematic pattern of such abuse occurs in the area of
products for individuals to use, which is precisely where it is
most unacceptable. Therefore, we have designed this version
of the GPL to prohibit the practice for those products. If such
problems arise substantially in other domains, we stand ready
to extend this provision to those domains in future versions of
the GPL, as needed to protect the freedom of users.
Finally, every program is threatened constantly by software
patents. States should not allow patents to restrict development
and use of software on general-purpose computers, but in
those that do, we wish to avoid the special danger that patents
applied to a free program could make it effectively proprietary.
To prevent this, the GPL assures that patents cannot be used
to render the program non-free.
41
English
(1) If any part of the source code for this software is distributed,
then this README file must be included, with this copyright
and no-warranty notice unaltered; and any additions, deletions,
or changes to the original files must be clearly indicated in
accompanying documentation.
(2) If only executable code is distributed, then the accompanying
documentation must state that "this software is based in part
on the work of the Independent JPEG Group".
(3) Permission for use of this software is granted only if the user
accepts full responsibility for any undesirable consequences;
the authors accept NO LIABILITY for damages of any kind.
The precise terms and conditions for copying, distribution and
modification follow.
English
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU General Public
License.
"Copyright" also means copyright-like laws that apply to other
kinds of works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under
this License. Each licensee is addressed as "you". "Licensees"
and "recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part
of the work in a fashion requiring copyright permission, other
than the making of an exact copy. The resulting work is called
a "modified version" of the earlier work or a work "based on"
the earlier work.
A "covered work" means either the unmodified Program or a
work based on the Program.
To "propagate" a work means to do anything with it that,
without permission, would make you directly or secondarily
liable for infringement under applicable copyright law, except
executing it on a computer or modifying a private copy.
Propagation includes copying, distribution (with or without
modification), making available to the public, and in some
countries other activities as well.
To "convey" a work means any kind of propagation that enables
other parties to make or receive copies. Mere interaction with
a user through a computer network, with no transfer of a copy,
is not conveying.
An interactive user interface displays "Appropriate Legal
Notices" to the extent that it includes a convenient and
prominently visible feature that (1) displays an appropriate
copyright notice, and (2) tells the user that there is no
warranty for the work (except to the extent that warranties
are provided), that licensees may convey the work under this
License, and how to view a copy of this License. If the interface
presents a list of user commands or options, such as a menu, a
prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the
work for making modifications to it. "Object code" means any
non-source form of a work.
A "Standard Interface" means an interface that either is an
official standard defined by a recognized standards body, or, in
the case of interfaces specified for a particular programming
language, one that is widely used among developers working
in that language.
The "System Libraries" of an executable work include anything,
other than the work as a whole, that (a) is included in the
normal form of packaging a Major Component, but which is not
part of that Major Component, and (b) serves only to enable
use of the work with that Major Component, or to implement a
Standard Interface for which an implementation is available to
the public in source code form. A "Major Component", in this
context, means a major essential component (kernel, window
system, and so on) of the specific operating system (if any) on
which the executable work runs, or a compiler used to produce
the work, or an object code interpreter used to run it. The
"Corresponding Source" for a work in object code form means
all the source code needed to generate, install, and (for an
executable work) run the object code and to modify the work,
including scripts to control those activities. However, it does
42
not include the work's System Libraries, or general-purpose
tools or generally available free programs which are used
unmodified in performing those activities but which are not
part of the work. For example, Corresponding Source includes
interface definition files associated with source files for the
work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to
require, such as by intimate data communication or control flow
between those subprograms and other parts of the work.
The Corresponding Source need not include anything that
users can regenerate automatically from other parts of the
Corresponding Source. The Corresponding Source for a work
in source code form is that same work.
2. Basic Permissions.
All rights granted under this License are granted for the term
of copyright on the Program, and are irrevocable provided the
stated conditions are met. This License explicitly affirms your
unlimited permission to run the unmodified Program. The
output from running a covered work is covered by this License
only if the output, given its content, constitutes a covered
work. This License acknowledges your rights of fair use or
other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you
do not convey, without conditions so long as your license
otherwise remains in force. You may convey covered works to
others for the sole purpose of having them make modifications
exclusively for you, or provide you with facilities for running
those works, provided that you comply with the terms of this
License in conveying all material for which you do not control
copyright. Those thus making or running the covered works for
you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any
copies of your copyrighted material outside their relationship
with you.
Conveying under any other circumstances is permitted solely
under the conditions stated below. Sublicensing is not allowed;
section 10 makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention
Law.
No covered work shall be deemed part of an effective
technological measure under any applicable law fulfilling
obligations under article 11 of the WIPO copyright treaty
adopted on 20 December 1996, or similar laws prohibiting or
restricting circumvention of such measures.
When you convey a covered work, you waive any legal power
to forbid circumvention of technological measures to the extent
such circumvention is effected by exercising rights under this
License with respect to the covered work, and you disclaim
any intention to limit operation or modification of the work as
a means of enforcing, against the work's users, your or third
parties' legal rights to forbid circumvention of technological
measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source
code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an
appropriate copyright notice; keep intact all notices stating that
this License and any non-permissive terms added in accord
with section 7 apply to the code; keep intact all notices of the
absence of any warranty; and give all recipients a copy of this
License along with the Program.
You may charge any price or no price for each copy that
you convey, and you may offer support or warranty protection
for a fee.
You may convey a work based on the Program, or the
modifications to produce it from the Program, in the form of
source code under the terms of section 4, provided that you
also meet all of these conditions:
a) The work must carry prominent notices stating that you
modified it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under
section 7. This requirement modifies the requirement in section
4 to "keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section
7 additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must
display Appropriate Legal Notices; however, if the Program
has interactive interfaces that do not display Appropriate Legal
Notices, your work need not make them do so.
A compilation of a covered work with other separate and
independentworks, which are not by their nature extensions
of the covered work,and which are not combined with it such
as to form a larger program, in or on a volume of a storage or
distribution medium, is called an "aggregate" if the compilation
and its resulting copyright are not used to limit the access
or legal rights of the compilation's users beyond what the
individual works permit. Inclusion of a covered work in an
aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under
the terms of sections 4 and 5, provided that you also convey
the machine-readable Corresponding Source under the terms
of this License, in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by
the Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as long
as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1)
a copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price
no more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the Corresponding
Source from a network server at no charge.
c) Convey individual copies of the object code with a copy
of the written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially,
and only if you received the object code with such an offer, in
accord with subsection 6b.
d) Convey the object code by offering access from a
designated place (gratis or for a charge), and offer equivalent
access to the Corresponding Source in the same way through
the same place at no further charge. You need not require
recipients to copy the Corresponding Source along with the
object code. If the place to copy the object code is a network
server, the Corresponding Source may be on a different server
(operated by you or a third party) that supports equivalent
copying facilities, provided you maintain clear directions next to
the object code saying where to find the Corresponding Source.
Regardless of what server hosts the Corresponding Source, you
remain obligated to ensure that it is available for as long as
needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission,
provided you inform other peers where the object code and
Corresponding Source of the work are being offered to the
general public at no charge under subsection 6d.
A separable portion of the object code, whose source code is
excluded from the Corresponding Source as a System Library,
need not be included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which
means any tangible personal property which is normally used
for personal, family, or household purposes, or (2) anything
designed or sold for incorporation into a dwelling.
In
determining whether a product is a consumer product, doubtful
cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to
a typical or common use of that class of product, regardless
of the status of the particular user or of the way in which the
particular user actually uses, or expects or is expected to use,
the product. A product is a consumer product regardless of
whether the product has substantial commercial, industrial
or non-consumer uses, unless such uses representthe only
significant mode of use of the product.
"Installation Information" for a User Product means any
methods, procedures, authorization keys, or other information
required to install and execute modified versions of a covered
work in that User Product from a modified version of its
Corresponding Source. The information must suffice to ensure
that the continued functioning of the modified object code
is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in,
or with, or specifically for use in, a User Product, and the
conveying occurs as part of a transaction in which the right of
possession and use of the User Product is transferred to the
recipient in perpetuity or for a fixed term (regardless of how
the transaction is characterized), the Corresponding Source
conveyed under this section must be accompanied by the
Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the
work has been installed in ROM).
The requirement to provide Installation Information does not
include a requirement to continue to provide support service,
warranty, or updates for a work that has been modified or
installed by the recipient, or for the User Product in which it
has been modified or installed. Access to a network may be
denied when the modification itself materially and adversely
affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information
provided, in accord with this section must be in a format that
is publicly documented (and with an implementation available
to the public in source code form), and must require no special
password or key for unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the
terms of this License by making exceptions from one or more
of its conditions. Additional permissions that are applicable
to the entire Program shall be treated as though they were
included in this License, to the extent that they are valid under
43
English
5. Conveying Modified Source Versions.
English
applicable law. If additional permissions apply only to part of
the Program, that part may be used separately under those
permissions, but the entire Program remains governed by this
License without regard to the additional permissions.
When you convey a copy of a covered work, you may at
your optionremove any additional permissions from that copy,
or from any part of it. (Additional permissions may be written
to require their own removal in certain cases when you modify
the work.) You may place additional permissions on material,
added by you to a covered work, for which you have or can give
appropriate copyright permission.
Notwithstanding any other provision of this License, for
material you add to a covered work, you may (if authorized by
the copyright holders of that material) supplement the terms of
this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices
or author attributions in that material or in the Appropriate
Legal Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material,
or requiring that modified versions of such material be marked
in reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors
or authors of the material; or
e) Declining to grant rights under trademark law for use of
some trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified
versions of it) with contractual assumptions of liability to the
recipient, for any liability that these contractual assumptions
directly impose on those licensors and authors.
All other non-permissive additional terms are considered
"furtherrestrictions" within the meaning of section 10. If the
Program as you received it, or any part of it, contains a notice
stating that it is governed by this License along with a term that
is a further restriction, you may remove that term. If a license
document contains a further restriction but permits relicensing
or conveying under this License, you may add to a covered
work material governed by the terms of that license document,
provided that the further restriction does not survive such
relicensing or conveying.
If you add terms to a covered work in accord with this section,
you must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be
stated in the form of a separately written license, or stated as
exceptions; the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as
expressly provided under this License. Any attempt otherwise to
propagate or modify it is void, and will automatically terminate
your rights under this License (including any patent licenses
granted under the third paragraph of section 11). However, if
you cease all violation of this License, then yourlicense from a
particular copyright holder is reinstated (a) provisionally, unless
and until the copyright holder explicitly and finally terminates
your license, and (b) permanently, if the copyright holder fails
to notify you of the violation by some reasonable means prior
to 60 days after the cessation.
44
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of
the violation by some reasonable means, this is the first time
you have received notice of violation of this License (for any
work) from that copyright holder, and you cure the violation
prior to 30 days after your receipt of the notice.
Termination of your rights under this section does not terminate
thelicenses of parties who have received copies or rights from
you under this License. If your rights have been terminated
and not permanently reinstated, you do not qualify to receive
new licenses for the same material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to
receive or run a copy of the Program. Ancillary propagation
of a covered work occurring solely as a consequence of using
peer-to-peer transmission to receive a copy likewise does not
require acceptance. However, nothing other than this License
grants you permission to propagate or modify any covered
work. These actions infringe copyright if you do not accept
this License. Therefore, by modifying or propagating acovered
work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient
automatically receives a license from the original licensors, to
run, modify and propagate that work, subject to this License.
You are not responsible for enforcing compliance by third
parties with this License. An "entity transaction" is a transaction
transferring control of an organization, or substantially all
assets of one, or subdividing an organization, or merging
organizations. If propagation of a covered work results from
an entity transaction, each party to that transaction who
receives a copy of the work also receives whatever licenses to
the work the party's predecessor in interest had or could give
under the previous paragraph, plus a right to possession of
the Corresponding Source of the work from the predecessor in
interest, if the predecessor has it or can get it with reasonable
efforts.
You may not impose any further restrictions on the exercise of
therights granted or affirmed under this License. For example,
you may not impose a license fee, royalty, or other charge for
exercise of rights granted under this License, and you may not
initiate litigation (including a cross-claim or counterclaim in a
lawsuit) alleging that any patent claim is infringed by making,
using, selling, offering for sale, or importing the Program or
any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under
this License of the Program or a work on which the Program
is based. The work thus licensed is called the contributor's
"contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already
acquired or hereafter acquired, that would be infringed by some
manner, permitted by this License, of making, using, or selling
its contributor version, but do not include claims that would be
infringed only as a consequence of further modification of the
contributor version. For purposes of this definition, "control"
includes the right to grant patent sublicenses in a manner
consistent with the requirements of this License.
Each contributor grants you a non-exclusive, worldwide,
royalty-free patent license under the contributor's essential
patent claims, to make, use, sell, offer for sale, import and
otherwise run, modify and propagate the contents of its
contributor version.
If you convey a covered work, knowingly relying on a patent
license, and the Corresponding Source of the work is not
available for anyone to copy, free of charge and under the
terms of this License, through a publicly available network
server or other readily accessible means, then you must either
(1) cause the Corresponding Source to be so available, or (2)
arrange to deprive yourself of the benefit of the patent license
for this particular work, or (3) arrange, in a manner consistent
with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means
you have actual knowledge that, but for the patent license, your
conveying the covered work in a country, or your recipient's use
of the covered work in a country, would infringe one or more
identifiable patents in that country that you have reason to
believe are valid.
If, pursuant to or in connection with a single transaction
orarrangement, you convey, or propagate by procuring
conveyance of, a covered work, and grant a patent license to
some of the parties receiving the covered work authorizing
them to use, propagate, modify or convey a specific copy
of the covered work, then the patent license you grant is
automatically extended to all recipients of the covered work
and works based on it.
A patent license is "discriminatory" if it does not include
within the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights
that are specifically granted under this License. You may not
convey a covered work if you are a party to an arrangement
with a third party that is in the business of distributing software,
under which you make payment to the third party based on the
extent of your activity of conveying the work, and under which
the third party grants, to any of the parties who would receive
the covered work from you, a discriminatory patent license (a)
in connection with copies of the covered work conveyed by you
(or copies made from those copies), or (b) primarily for and in
connection with specific products or compilations that contain
the covered work, unless you entered into that arrangement, or
that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or
limiting any implied license or other defenses to infringement
that may otherwise be available to you under applicable patent
law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order,
agreement or otherwise) that contradict the conditions of
this License, they do not excuse you from the conditions of
this License. If you cannot convey a covered work so as to
satisfy simultaneously your obligations under this License and
any other pertinent obligations, then as a consequence you
may not convey it at all. For example, if you agree to terms
that obligate you to collect a royalty for further conveying from
those to whom you convey the Program, the only way you
could satisfy both those terms and this License would be to
refrain entirely from conveying the Program.
13. Use with the GNU Affero General Public License.
Notwithstanding any other provision of this License, you
have permission to link or combine any covered work with
a work licensed under version 3 of the GNU Affero General
Public License into a single combined work, and to convey
the resulting work. The terms of this License will continue to
apply to the part which is the covered work, but the special
requirements of the GNU Affero General Public License, section
13, concerning interaction through a network will apply to the
combination as such.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or
new versions of the GNU General Public License from time to
time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or
concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU
General Public License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that numbered version or of any later version published by the
Free Software Foundation. If the Program does not specify
a version number of the GNU General Public License, you
may choose any version ever published by the Free Software
Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that
proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed
on any author or copyright holder as a result of your choosing
to follow a later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS
AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH
YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR
DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
17. Inter pretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their
terms, reviewing courts shall apply local law that most closely
approximates an absolute waiver of all civil liability in connection
with the Program, unless a warranty or assumption of liability
accompanies a copy of the Program in return for a fee.
45
English
In the following three paragraphs, a "patent license" is any
express agreement or commitment, however denominated, not
to enforce a patent (such as an express permission to practice
a patent or covenant not to sue for patent infringement). To
"grant" such a patent license to a party means to make such
an agreement or commitment not to enforce a patent against
the party.
libpng
English
This copy of the libpng notices is provided for your convenience.
In case of any discrepancy between this copy and the notices in
the file png.h that is included in the libpng distribution, the latter
shall prevail.
Permission is hereby granted to use, copy, modify, and distribute this
source code, or portions hereof, for any purpose, without fee, subject
to the following restrictions:
1. The origin of this source code must not be misrepresented.
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:
2. Altered versions must be plainly marked as such and must not be
misrepresented as being the original source.
If you modify libpng you may insert additional notices immediately
following this sentence.
3. This Copyright notice may not be removed or altered from any
source or altered source distribution.
This code is released under the libpng license.
The Contributing Authors and Group 42, Inc. specifically permit,
without fee, and encourage the use of this source code as a
component to supporting the PNG file format in commercial products.
If you use this source code in a product, acknowledgment is not
required but would be appreciated.
libpng versions 1.2.6, August 15, 2004, through 1.5.7, December 15,
2011, are Copyright (c) 2004, 2006-2011 Glenn Randers-Pehrson,
and are distributed according to the same disclaimer and license
as libpng-1.2.5 with the following individual added to the list of
Contributing Authors
Cosmin Truta
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3,
2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and
are distributed according to the same disclaimer and license
as libpng-1.0.6 with the following individuals added to the list of
Contributing Authors
Simon-Pierre Cadieux
Eric S. Raymond
Gilles Vollant
and with the following additions to the disclaimer:
There is no warranty against interference with your enjoyment
of the library or against infringement. There is no warranty that
our efforts or the library will fulfill any of your particular purposes
or needs. This library is provided with all faults, and the entire risk
of satisfactory quality, performance, accuracy, and effort is with the
user.
libpng versions 0.97, January 1998, through 1.0.6, March 20,
2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson,
and are distributed according to the same disclaimer and license
as libpng-0.96, with the following individuals added to the list of
Contributing Authors:
Tom Lane
Glenn Randers-Pehrson
Willem van Schaik
libpng versions 0.89, June 1996, through 0.96, May 1997, are
Copyright (c) 1996, 1997 Andreas Dilger Distributed according to
the same disclaimer and license as libpng-0.88, with the following
individuals added to the list of Contributing Authors:
John Bowler
Kevin Bracey
Sam Bushell
Magnus Holmgren
Greg Roelofs
Tom Tanner
libpng versions 0.5, May 1995, through 0.88, January 1996, are
Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
For the purposes of this copyright and license, "Contributing Authors"
is defined as the following set of individuals:
Andreas Dilger
Dave Martindale
Guy Eric Schalnat
Paul Schmidt
Tim Wegner
The PNG Reference Library is supplied "AS IS". The Contributing
Authors and Group 42, Inc. disclaim all warranties, expressed
or implied, including, without limitation, the warranties of
merchantability and of fitness for any purpose. The Contributing
Authors and Group 42, Inc. assume no liability for direct, indirect,
incidental, special, exemplary, or consequential damages, which may
result from the use of the PNG Reference Library, even if advised of
the possibility of such damage.
46
A "png_get_copyright" function is available, for convenient use in
"about" boxes and the like:
printf("%s",png_get_copyright(NULL));
Also, the PNG logo (in PNG format, of course) is supplied in the files
"pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
Libpng is OSI Certified Open Source Software. OSI Certified Open
Source is a certification mark of the Open Source Initiative.
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
December 15, 2011
libxml (MIT License)
Open Source Initiative OSI - The MIT License (MIT):Licensing
The MIT License (MIT)
Copyright (c) <year> <copyright holders>
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject
to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
DMG’s dtoa and strtod
The author of this software is David M. Gay.
Copyright (c) 1991, 2000, 2001 by Lucent Technologies.
Permission to use, copy, modify, and distribute this software for any
purpose without fee is hereby granted, provided that this entire notice
is included in all copies of any software which is or includes a copy
or modification of this software and in all copies of the supporting
documentation for such software.
THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY
EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER
THE AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR
WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE.
The distribution terms for Bison-generated parsers permit using the
parsers in nonfree programs. Before Bison version 2.2, these extra
permissions applied only when Bison was generating LALR(1) parsers
in C. And before Bison version 1.24, Bison-generated parsers could
be used only in programs that were free software.
The other GNU programming tools, such as the GNU C compiler,
have never had such a requirement. They could always be used for
nonfree software. The reason Bison was different was not due to a
special policy decision; it resulted from applying the usual General
Public License to all of the Bison source code.
The output of the Bison utility the Bison parser file contains a
verbatim copy of a sizable piece of Bison, which is the code for
the parser’s implementation. (The actions from your grammar are
inserted into this implementation at one point, but most of the rest of
the implementation is not changed.) When we applied the GPL terms
to the skeleton code for the parser’s implementation, the effect was
to restrict the use of Bison output to free software.
We didn’t change the terms because of sympathy for people who
want to make software proprietary. Software should be free. But we
concluded that limiting Bison’s use to free software was doing little
to encourage people to make other software free. So we decided to
make the practical conditions for using Bison match the practical
conditions for using the other GNU tools.
This exception applies when Bison is generating code for a parser.
You can tell whether the exception applies to a Bison output file by
inspecting the file for text beginning with ¨As a special exception....
The text spells out the exact terms of the exception.
dmalloc
This is a version (aka dlmalloc) of malloc/free/realloc written
by Doug Lea and released to the public domain, as explained at
http://creativecommons.org/licenses/publicdomain. Send questions,
comments, complaints, performance data, etc to [email protected].
edu.
EMX_sprintf_sscanf
The emx libraries are not distributed under the GPL. Linking an
application with the emx libraries does not cause the executable to
be covered by the GNU General Public License. You are allowed to
change and copy the emx library sources if you keep the copyright
message intact. If you improve the emx libraries, please send
your enhancements to the emx author (you should copyright your
enhancements similar to the existing emx libraries).
JSON_Parser
Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation files
(the “Software”), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject
to the following conditions:
The above copyright notice and this permission notice shall be
included in allcopies or substantial portions of the Software.The
Software shall be used for Good, not Evil.
ncurses
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
--------------------------------------------------------------------------Copyright (c) 1998-2000,2006 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person
obtaining acopy of this software and associated documentation files
(the"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,--
distribute, distribute with modifications, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software
is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE. Except as contained in this notice,
the name(s) of the above copyright holders shall not be used in
advertising or otherwise to promote the sale, use or other dealings in
this Software without prior written authorization.
WPASupplicant
Alternatively, this software may be distributed, used, and modified
under the terms of BSD license: Redistribution and use in source and
binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following disclaimer
in the documentation and/or other materials provided with the
distribution.
3. Neither the name(s) of the above listed copyright holder(s) nor
the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
tinyxml
www.sourceforge.net/projects/tinyxml
Original code (2.0 and earlier )copyright (c) 2000-2006 Lee Thomason
(www.grinninglizard.com)
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any
damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation
would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
47
English
bison_parser
glibc2.9_LICENSE
English
This file contains the copying permission notices for various
files in the GNU C Library distribution that have copyright
owners other than the Free Software Foundation. These
notices all require that a copy of the notice be included in the
accompanying documentation and be distributed with binary
distributions of the code, so be sure to include this file along
with any binary distributions derived from the GNU C Library.
All code incorporated from 4.4 BSD is distributed under the
followinglicense: Copyright (C) 1991 Regents of the University
of California. All rights reserved. Redistribution and use in
source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. [This condition was removed].
4. Neither the name of the University nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The DNS resolver code, taken from BIND 4.9.5, is copyrighted
both by UC Berkeley and by Digital Equipment Corporation.
The DEC portions are under the following license: Portions
Copyright (C) 1993 by Digital Equipment Corporation.
Permission to use, copy, modify, and distribute this software
for any purpose with or without fee is hereby granted, provided
that the above copyright notice and this permission notice
appear in all copies, and that the name of Digital Equipment
Corporation not be used in advertising or publicity pertaining
to distribution of the document or software without specific,
written prior permission.
THE SOFTWARE IS PROVIDED ``AS IS'' AND DIGITAL
EQUIPMENT CORP. DISCLAIMS ALL WARRANTIES WITH
REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO
EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE LIABLE
FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSE QUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.
The Sun RPC support (from rpcsrc-4.0) is covered by the
following license: Copyright (C) 1984, Sun Microsystems, Inc.
Sun RPC is a product of Sun Microsystems, Inc. and is provided
for unrestricted use provided that this legend is included on all
tape media and as a part of the software program in whole or
part. Users may copy or modify Sun RPC without charge, but
are not authorized to license or distribute it to anyone else
except as part of a product or program developed by the user.
SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF
ANY KIND INCLUDING THE WARRANTIES OF DESIGN,
MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE
48
OR TRADE PRACTICE.
Sun RPC is provided with no support and without any obligation
on the part of Sun Microsystems, Inc. to assist in its use,
correction, modification or enhancement.
SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH
RESPECT TO THE INFRINGEMENT OF COPYRIGHTS, TRADE
SECRETS OR ANY PATENTS BY SUN RPC OR ANY PART
THEREOF. In no event will Sun Microsystems, Inc. be liable
for any lost revenue or profits or other special, indirect and
consequential damages, even if Sun has been advised of the
possibility of such damages. The following CMU license covers
some of the support code for Mach, derived from Mach 3.0:
Mach Operating System Copyright (C) 1991,1990,1989 Carnegie
Mellon University All Rights Reserved. Permission to use, copy,
modify and distribute this software and its documentation is
hereby granted, provided that both the copyright notice and
this permission notice appear in all copies of the software,
derivative works or modified versions, and any portions thereof,
and that both notices appear in supporting documentation.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN
ITS ``AS IS'' CONDITION. CARNEGIE MELLON DISCLAIMS ANY
LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER
RESULTING FROM THE USE OF THIS SOFTWARE.Carnegie
Mellon requests users of this software to return to Software
Distribution Coordinator School of Computer Science Carnegie
Mellon University Pittsburgh PA 15213-3890 or Software.
[email protected] any improvements or extensions that
they make and grant Carnegie Mellon the rights to redistribute
these changes.The file if_ppp.h is under the following CMU
license: Redistribution and use in source and binary forms,
with or without modification, are permitted provided that the
following conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
3. Neither the name of the University nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY CARNEGIE MELLON
UNIVERSITY AND CONTRIBUTORS ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
UNIVERSITY OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The
following license covers the files from Intel's "Highly Optimized
Mathematical Functions for Itanium" collection: Intel License
Agreement Copyright (c) 2000, Intel Corporation All rights
reserved. Redistribution and use in source and binary forms,
with or without modification, are permitted provided that the
following conditions are met: Redistributions of source code
must retain the above copyright notice, this list of conditions
and the following disclaimer. Redistributions in binary form
must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution. The
name of Intel Corporation may not be used to endorse or
promoteproducts derived from this software without specific
prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS
English
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL INTEL OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The files inet/getnameinfo.c and sysdeps/posix/getaddrinfo.c
are copyright(C) by Craig Metz and are distributed under the
following license:
The Inner Net License, Version 2.00 The author(s) grant
permission for redistribution and use in source and binary
forms, with or without modification, of the software and
documentation provided that the following conditions are met:
0. If you receive a version of the software that is specifically
labelled as not being for redistribution (check the version
message and/or README), you are not permitted to redistribute
that version of the software in any way or form.
1. All terms of the all other applicable copyrights and licenses
must be followed.
2. Redistributions of source code must retain the authors'
copyright notice(s), this list of conditions, and the following
disclaimer.
3. Redistributions in binary form must reproduce the authors'
copyright notice(s), this list of conditions, and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
4. [The copyright holder has authorized the removal of this
clause.]
5. Neither the name(s) of the author(s) nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY ITS AUTHORS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. If these
license terms cause you a real problem, contact the author.
49
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement