phaos line led analog

LED

Multicoloured luminaires www.zumtobelstaff.com/phaos

LED

Multicoloured luminaires

Reception area at the headquarters of an international company. This is where visitors get their first impression of a company’s philosophy, brand content and image: just the right place for LED multicoloured luminaires – whether LEDOS RGB, PHAOS lighting tiles, lighting tubes or XENO LED spotlights. Thanks to the latest LED technology and sophisticated electronic control systems, PHAOS can be used to design fascinating plays of light colour in a creative manner: for illuminated walls in dynamic colours, impressive lighting accents, or to set room scenes which are full of atmosphere.

LED multicoloured luminaires can make a room uniquely easily-remembered and unmistakably different.

M U L T I C O L O U R E D L U M I N A I R E S F O Y E R 3

Competence focused on LEDs

A new technology for dynamic light

E S D S E C T I O N

M A N U F A C T U R I N G

Up-to-date technology and manufacturing

As a leading luminaire manufacturer, Zumtobel Staff is investing heavily in the potential of innovative LED technology. As well as carrying out intensive research and development work, it has established a separate ultra-modern high-performance production division for manufacturing LED systems. Enthusiastic, highly professional experts at workstations which are protected against electrostatic discharge (ESD) use state-of-theart laboratory equipment to ensure the very highest quality level.

Varied product range

As a result of this commitment, users can now benefit from a perfected LED product line which is capable of creating an extremely diverse range of lighting effects: from static lighting points through to dynamically changing colour scenes. The full potential of this technology still remains largely untapped. This explains why

Zumtobel Staff is determined to stay on the ball and to turn the latest developments in LED technology into innovative products which are opening up new horizons for lighting design.

Fast delivery, flexibly preassembled units

Zumtobel Staff gives high priority to LED systems – even as far as logistics are concerned. Deliveries are correspondingly fast, and consignments are complete.

In addition, the well-thought-out modular design of the LED luminaire components enables of delivery customised, project-specific lighting solutions at short notice.

T E S T I N G

LED multicoloured luminaires

Fascinating interplay of colours

M U L T I C O L O U R E D L U M I N A I R E S 5

Colour and dynamism

The functional strengths of LEDs include compactness, long service life, minimal maintenance, low energy consumption, electronic controllability, low surface temperature, positional flexibility and variable angles of radiation. Zumtobel Staff

LED multicoloured luminaires add

dynamic interplay of colours

to these features.

RGB technology is the magic concept which makes these colour shows possible. RGB stands for the electronically controlled interplay of red, green and blue LEDs which is theoretically capable of generating 16.7 million colour hues. This can be achieved not just statically but also in an extremely wide range of dynamic sequences: suddenly like a moving wave of light, perceptibly changing like a

chameleon

or almost imperceptibly changing, like changes in daylight. Intervals between changes can vary from

3 seconds to 3 hours. Different LED designs are used in the luminaires depending on the lighting system: wired radial

LEDs, SMD LEDs or LEDs which use chip-on-board technology.

Controlled colour sequences

Zumtobel Staff’s diverse multicoloured luminaire product lines offer three levels of dynamic interplay between light and colour:

LEDOS RGB

A preset programmed chip-controlled light-colour sequence within 15 seconds.

PHAOS ANALOG

Lighting modules controlled via an analog BUS for a coordinated light-colour show from various PHAOS

ANALOG systems.

PHAOS DIGITAL

The sophisticated solution – controlled over a digital lighting management BUS, with plenty of scope for designing complex, dynamic light-colour scenarios using several PHAOS DIGITAL systems. The sequence is programmed by using a lighting management input unit, a touch-panel screen or a PC.

Note: Because of technical control incompatibilities, products in the LEDOS RGB, PHAOS ANALOG and

PHAOS DIGITAL ranges cannot be used in combination with each other.

t f (50 Hz)

LEDOS RGB – synchronised by identical phase relation

LED light shows

The magic of staging attractive settings

The coloured light shows which can be produced using LED multicoloured luminaires are truly eye-catching. It is not by chance that their traditional applications include presentation and retail, shops, showrooms and shop windows. Wherever there is a need to attract the public’s attention, these luminaires are in their element. Their effect is best exploited in restrained conventional ambient lighting.

L E D M U L T I C O L O U R E D L U M I N A I R E S 7

The idea

The aim is to make a specific motor cycle model the centre of attention in a dealer’s showroom.

The concept

Three XENO LED spotlights from the PHAOS ANALOG range are spaced 1.20 m apart and directed towards the motor cycle. Each luminaire produces light-colour sequences and sets the scene in its own sector independently of the other two luminaires.

The real strengths of LED multicoloured luminaires come into play in many application areas: as decorative architectural features, as lighting accents and creating a sense of direction in museums and art galleries, to set the mood in hotels, restaurants and bars, to provide spiritual invigoration in health and therapy treatment areas, or as a magnet to draw public attention to trade fair stands. This comprehensive system portfolio offers a vast amount of creative scope ranging from individual accent lighting through to large-scale concepts.

The effect

The dynamic colour changes in the way the three sectors are lit alternately emphasise individual details of the motor cycle, and the different material properties of its different components ensure additional effects.

This catches the observer’s attention; colour and dynamism set the stage for an exciting visual experience.

LEDOS RGB

Break into the dynamic world of colour

Even LEDOS RGB compact recessed luminaires provide plenty of dynamism. They contain a chip which delivers a fixed programmable colour sequence to run the desired range of colours within 15 seconds with gradual transitions between colours. These luminaires are available in a square or a round design, and are suitable for providing accent lighting as well as guidance. Electrical installation is straightforward and fast – the luminaire is directly connected to the mains supply. All luminaires connected to a particular line are clocked and synchronised via the power-line frequency; the programmed sequence is preset.

LEDOS RGB is suitable for a wide range of uses. Its high degree of protection

(IP 67), high load-bearing capacity of up to

1,000 kg and suitability for installation in concrete, brickwork or cavity walls means that LEDOS RGB can be used outdoors as well as indoors. Whether used as a single luminaire or as a synchronised group of luminaires – LEDOS RGB provides impressive lighting and is therefore at home wherever light is used to set the stage for rooms or interior decor: in shops, hotels, restaurants, bars, cinemas, theatres, etc.

Please also refer to pages 36 and 37 for product details, installation, mounting tips and specification text.

L E D O S R G B L I G H T A N D D Y N A M I S M 9

Guiding, embellishing, accentuating

with LEDOS RGB

Guide

Along access routes, in prestigious circulation areas or corridors, dynamic light-colour shows produced by LEDOS

RGB lead people along the right path and create a secure sense of direction in areas which are dark. This is all possible without high energy consumption, with little maintenance effort, and provides plenty of scope for attractively designed floors and walls.

Embellish

With its lively colour changes,

LEDOS RGB brings vitality and character to any room. Lighting points become eye-catching interior design features. Not just in hotel suite bathrooms but wherever there is a need to create a sense of well being, invite guests to linger or attract attention.

Accentuate

LEDOS RGB uses constantly changing lighting accents to turn even boring floor surfaces into the focus of visual attention.

Benefits: more attractive look and improved safety.

L E D O S R G B L I G H T I N G A C C E N T S 11

PHAOS ANALOG

Spectacular lighting programs for any situation

PHAOS ANALOG is a product range that comprises various luminaire models which have one common feature: they are controlled over an analog BUS.

The range includes components for wide-areas as well as pinpoint coloured light which can be used as stand-alone devices or in association with other systems from the same product range in a coordinated way.

P H A O S L I G H T I N G T I L E L E D A N A L O G 14–17

P H A O S X E N O L E D A N A L O G

18–21

P H A O S L I G H T I N G T U B E L E D A N A L O G

22–25

P H A O S L I N E L E D A N A L O G

26–29

P H A O S C O N T R O L U N I T A N A L O G

• Programming

• Combinations

• Bus networking

See refer to pages 32– 35 for PHAOS DIGITAL lighting.

30–31

P H A O S A N A L O G L I G H T I N G P R O G R A M S 13

Hymer “all-in-one-car” research project

• Concept study for a futuristic motorhome

• Innovative lighting featuring Zumtobel Staff

LED multicoloured luminaires, among other fittings

• PHAOS lighting tiles create a leisureoriented atmosphere

• Extremely wide range of lighting scenes – from sunset to blue sky – can be “conjured up” at the user’s whim or chosen to match a particular season, destination or weather

• Low surface temperature and compact mounting dimensions for maximum creative scope

PHAOS lighting tile

LED ANALOG

A wealth of colours in one square

Depending on requirements, the PHAOS lighting tile LED ANALOG can, as a presentation surface or illuminated wall with dynamically changing colours, set the stage for itself or for a specific object. Its brightly and evenly lit square surface spreads light; the colours of the light can be changed over the entire surface or be accentuated at the press of a button. There are practically no limits on the choice of colours, and the pace and transition speed of colour changes are always variable.

Technical details

• PHAOS lighting tiles LED ANALOG measure 228 x 228 mm and can be used as stand-alone units or, alternatively, can be driven and programmed using an analog BUS

• They can be installed in a variety of positions. A special mounting frame is available for wall mounting

• The titanium coloured die-cast aluminium housing ensures optimum heat dissipation for safety and a long service life

• Rugged sandwich construction with rear and front reflector sheets and high-grade acrylic diffuser panel

• When fitted with optional special power supply unit, the luminaire meets protection class III specifications (SELV)

Please also refer to pages 36 and 37 for further product details, installation and mounting tips and specification text.

P H A O S A N A L O G L I G H T I N G T I L E 15

Plenty of creative scope

Light as the link between stress and stress relief

The lighting tile is versatile, has a wide range of possible applications and opens up vast scope for creative design. The

PHAOS lighting tile LED ANALOG, like the digital version, is mounted on beams, walls or other surfaces or simply placed in a room

– on its own or with several others in a group formation. Depending on the colour program, it provides light which has a calming or stimulating effect. It can also be used as an eye-catching feature in shops and restaurant and catering areas.

Its design and technical options always seem to inspire creative use. Individually devised arrangements and colour shows produce exhibits which, in counter and reception halls, exude spectacular flair.

The user interface ensures programs are easy to handle in any application.

Just like their digital counterparts, PHAOS lighting tiles LED ANALOG are highly effective tools for setting the stage for objects in a pleasing manner. In both sales spaces and museums, glass objects produce an impressive succession of colours and capture the spellbound observer’s attention.

Lighting tiles can act as a “presentation platform” or serve as decorative items in their own right. The option to determine the best colour mix and appropriate pace for a sequence as required ensures a high level of flexibility.

P H A O S A N A L O G W E L L N E S S 17

Just like the digital model, PHAOS lighting tiles LED ANALOG encourage interesting design in areas such as wellness centres and medical treatment rooms. The effect of the light they produce can be defined so that the lighting scene obtained encourages stress relief and relaxation. They can be used to produce a simple, changing image which distracts and calms patients in a waiting room, they can be an integral part of colour therapy, or an interior design feature in a fitness gym – they have a large number of possible uses.

P H A O S A N A L O G X E N O L E D 19

PHAOS XENO LED

ANALOG

Putting the spotlight on colour changes

The possibility of dynamically spotlighting millions of colour shades with pre-programmed sequences and dissolve speeds makes the XENO LED spotlight (created by designer Jean-Michel Wilmotte) the specialist in setting dramatic lighting stages. If the stage setting changes, often a single key press is enough to change the colour sequence. The light produced has no IR or UV components and exhibits can therefore be lit in a manner which meets the need for careful conservation.

Technical details

• This striking design in titanium grey and black is the work of internationally famous French designer Jean-

Michel Wilmotte

• Rugged design using aluminium and die-cast metal as well as a durable controller made of high impact resistant polycarbonate

• Luminaires can be rotated through 365º and pivoted through 90º; this enables them to be positioned as flexibly as possible

• The built-in SELV safety transformer ensures safe operation

• Light-colour sequences can be programmed on the actual luminaire when used as a stand-alone unit or can be programmed via an analog BUS

• Wall- and ceiling-mounting are made easy by a wall-mounting bracket

The PHAOS XENO LED ANALOG spotlight is easily programmed at the rear of the unit or can be programmed via a separate control unit (art. no. 60 810 440).

The X-joint lends the spotlight its distinctive, unmistakeable character.

Please also refer to page 38 for further product details, installation and mounting tips and specification text.

XENO LED

The specialist in setting dramatic lighting scenes

The XENO LED spotlight’s capabilities mean that it is inevitably used for highly effective presentations in shops, museums, art galleries and exhibition areas. It also creates exciting, richly varied lighting scenes in foyers, bars, restaurants and many other prestigious areas where it achieves maximum effect when used in restrained ambient lighting.

P H A O S A N A L O G P R E S E N T A T I O N 21

Showing off products and brands in shops, and exhibits in art galleries and museums highly effectively with dynamic light in variable colours – like its digital “brother”, PHAOS XENO LED

ANALOG showcases objects in the right light in an innovative, non-damaging manner.

PHAOS lighting tube LED ANALOG

Varied colours all the way along the line

Guiding, accompanying or creating a background – the PHAOS lighting tube LED ANALOG is designed for indirect light distribution and can handle many tasks and accomplish them creatively thanks to a selectively variable, wide variety of colours. Sometimes concealed in coves, sometimes deliberately installed in a prominent position, the emphasis is always clearly on the lighting tube’s effect.

Colours bring a room to life, regardless whether they change randomly or colour changes are coordinated along the line of lighting tubes. Shops, bars, restaurants and wellness areas are transformed into visually rich landscapes. The lighting tube can be rotated through 355º to ensure maximum flexibility in terms of distribution position. Continuous lines of light over virtually unlimited distances can be implemented straightforwardly without significant installation effort.

Spectacular effects can be achieved by deploying linear waves of colours controlled by lighting management systems.

The PHAOS ANALOG control unit is needed in order to program the PHAOS lighting tube

LED ANALOG and PHAOS LINE, and is also the perfect device for conveniently controlling the PHAOS lighting tile LED ANALOG and

PHAOS XENO LED ANALOG.

P H A O S A N A L O G L I G H T I N G T U B E 23

Technical details

• The PHAOS lighting tube LED ANALOG has a diameter of

40 mm and is available in lengths of 310 and 900 mm fitted with 100 or 300 LEDs depending on design size

• Lighting tube can be rotated through 355º

• Housing made of titanium grey aluminium extrusion with plastic end pieces, robust construction

• Controller made of high impact resistant transparent polycarbonate to protect against impact

• Two possible installation methods: surface-mounted or wall-mounted with flush socket and through-wiring in the wall; both methods enable horizontal as well as vertical installation

• Lighting tube with 24 V DC supply and a separate 25 W power supply unit meets protection class III specifications (SELV)

• Controlled/programmed via separate control unit

(art. no. 60 810 440)

Please also refer to pages 38 and 39 for further product details, installation and mounting tips and order wording as well as to page 43 for installation and mounting tips.

1200

1100

Schematic view of illustrated light window

16 x lighting tube 60 810 427

Pure fascination: dynamic indirect lighting using the PHAOS lighting tube

PHAOS ANALOG

The latest-generation lighting tube

Like the digital version, PHAOS lighting tubes LED ANALOG can be used individually or as a flexibly arranged continuous row of light whose length can be varied in 30 cm increments.

Framing, cove lighting or linear backlighting achieve interesting effects in shops, edging round mirrors in beauty salons or hairdressers, hotels, restaurant and catering areas, and in theatres or cinemas.

Besides the creative freedom they give to users when programming colour changes, the most striking differences between these lighting tubes and conventional tubular lighting systems are their low surface temperature and long service life.

P H A O S A N A L O G C R E A T I N G E F F E C T S 25

PHAOS LINE LED ANALOG

Dynamically coloured strips of light

The dynamically coloured LED strips of light of PHAOS LINE

LED ANALOG surface-mounted and recessed luminaires bring floors and walls to life. Impressive effects and public attention are guaranteed in shops, shopping malls, hotels, cinemas, museums and restaurants.

Two different lengths are available to build continuous rows of almost unlimited length which can be configured as required.

Colour changes are possible with an extremely wide variety of compositions and sequences – even waves of coloured light running along the entire length of the row – a wealth of possibilities is waiting to be exploited.

Because of the materials used,

PHAOS LINE is a high-quality, durable product: V4A special steel, die-cast or extruded aluminium sections, and frosted safety glass.

PHAOS LINE LED

ANALOG surfacemounted luminaire

PHAOS LINE LED

ANALOG recessed luminaire

PHAOS LINE LED ANALOG will be available in November 2002.

Because it can be flexibly surface-mounted, PHAOS LINE can be used to illuminate facades in an uplight or downlight position.

It is equally suitable for use as a continuous row system in outdoor areas or in damp locations.

The adjustable wall support enables unevenness to be compensated.

It can also be used to alter the distribution of light. A straightline design and compact size also ensure that it blends unobtrusively into the overall architectural scheme.

P H A O S A N A L O G L I N E L E D 27

PHAOS LINE LED ANALOG

Recessed and surface-mounted luminaires

PHAOS LINE LED ANALOG recessed luminaires

Ideal application areas for PHAOS LINE recessed luminaires include prestigious circulation areas where they do an impressive job of directing and guiding when embedded in the floor. By producing uniformly illuminated surfaces, they make an equally strong impression as decorative effective lighting in counters, furniture or shop interiors. When used to light staircase steps, they even make a valuable contribution towards safety.

Technical details

• PHAOS LINE LED ANALOG recessed luminaires are available in lengths of 380 and 1,000 mm. They can be combined into continuous rows of practically infinite length without any significant installation effort.

• Rugged housing made of extruded aluminium section, end pieces are made of die-cast aluminium, the entire luminaire is powder-coated in titanium grey. Equally rugged: frosted 10 mm safety glass. The design is completed by a cover frame made of V4A special steel.

• The number of LEDs in the luminaire depends on its length:

380 mm size has 100 LEDs, 1,000 mm size has 300 LEDs.

• A special casting box enables installation in cavity walls

(minimum recessed depth 85 mm) and in concrete/brickwork.

• Two PG 13.5 cable glands for through-wiring.

• Luminaires meet the following specifications: IP 67, protection class II, load-bearing capacity up to 500 kg.

• Controlled via a separate analog control unit

(art. no. 60 810 440).

PHAOS LINE LED ANALOG surface-mounted luminaires

Large façades and walls of the kind encountered in airports, trade fair and sales halls, sports stadiums and department stores can be given an individual touch by colour shows provided by PHAOS

LINE surface-mounted luminaires. They are equally at home in situations where coves and roof structures of architecturally sophisticated buildings need to be emphasised. Their ability to withstand moisture makes this continuous row system a safe and almost maintenance-free solution. Their optic designed for indirect lighting ensures that the desired surfaces are brightly illuminated.

Technical details

• PHAOS LINE modules are available in lengths of 360 and

980 mm. They can be installed either horizontally or vertically in order to build continuous row systems without any significant installation effort.

• The luminaire is extremely compact (dimensions: 80 x 80 mm).

• Robust design consisting of extruded aluminium section with end pieces made of die-cast aluminium, powder-coated in titanium grey, and high impact resistant controller made of polycarbonate.

• The number of LEDs depends on the length of the luminaire:

360 mm size has 100 LEDs, 980 mm size has 300 LEDs.

• An adjustable (± 20º) graduated mounting base ensures easy installation.

• PHAOS LINE LED ANALOG meets specifications of the following standards: IP 65 and protection class II, and is also impact resistant (6 joules).

• Controlled via a separate control unit (art. no. 60 810 440).

Please also refer to page 39 for further product details and order wording.

PHAOS LINE products are also available for use with a T5 compact fluorescent lamp 8 W (compact version), 21 and 39 W.

P H A O S A N A L O G P A S S A G E 29

Dynamic lighting in variable colours, can be walked on, protected against moisture, as lighting accent or continuous row system – PHAOS LINE.

Master and slave principle

Controlled synchronised sequences

PHAOS ANALOG programming

• Products are generally supplied with a default program

• Up to 10 colours can be mixed and stored

• Program steps are detected by monitoring LEDs in various modes

• Time setting for individual colours

• Definable dissolve/fading times

• Special setting for white colour

• Program is stored in EEPROM in the event of power failure

• Easy-to-define “master” controls the “slaves” (all slaves operate identically)

• Master can be selected on the product itself or by using a separate analog control unit in the case of PHAOS lighting tile and PHAOS XENO LED

• Separate control unit must be used for PHAOS lighting tube and PHAOS LINE

PHAOS lighting tile LED ANALOG with separate analog control unit

230 V AC

Bus line 60 800 117

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

PHAOS lighting tile LED ANALOG

230 V AC Bus line 60 800 117

Power supply unit 25 W

Power supply unit 25 W

Use signal amplifier if more than 10 PHAOS

LED luminaires (lighting tiles, lighting tube, PHAOS

LINE) are networked over analog bus

PHAOS A

CTRL

60 810 440

PHAOS A

LED LK

PHAOS A

LED LK

PHAOS A

LED LK

1 master (separate analog control unit)

9 slaves

PHAOS lighting tile LED ANALOG

230 V AC max. 1 master, 9 slaves Bus line 60 800 117

PHAOS A

LED LK

No. 10 resp.

No. 20 resp.

No. 30 etc.

Signal amplifier

60 810 441

PHAOS A

LED LK

No. 11 resp.

No. 21 resp.

No. 31 etc.

PHAOS lighting tube LED ANALOG 310 mm

230 V AC Bus line 60 800 117

Power supply unit 25 W

PHAOS A

LED LK master

Power supply unit 25 W

PHAOS A

LED LK

Power supply unit 25 W

PHAOS A

LED LK

Power supply unit 25 W

PHAOS A

LED LK

Power supply unit 25 W

Power supply unit 25 W

PHAOS A

CTRL

60 810 440

PHAOS A

LED lighting tube 310 mm

PHAOS A

LED lighting tube 310 mm

PHAOS A

LED lighting tube 310 mm

PHAOS A

LED lighting tube 310 mm

1 master (separate analog control unit 60 810 440 must be used); up to 9 slaves (310 or 900 mm lighting tube); 1 power supply unit drives up to two 310 mm lighting tubes

P H A O S A N A L O G C O N F I G U R A T I O N S 31

PHAOS ANALOG BUS

• Up to 10 luminaires per group; one luminaire acts as the master

• Separate control is possible using PHAOS A CTRL (art. no. 60 810 440).

Analog control unit performs master function, connected luminaires operate in slave mode

• Up to 10 networked systems can be mixed. Prerequisite: all systems are part of the PHAOS ANALOG product family. Luminaires groups comprising more than 10 luminaires require signal amplifier (art. no. 60 810 441)

• 24 V control voltage for control unit (art. no. 60 810 440) and for signal amplifier is tapped from the nearest PHAOS ANALOG luminaire installed; for PHAOS XENO LED ANALOG, a compact DC power supply unit

(e.g. art. no. S7 003 150) provides the 24 V

• PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG are programmed and switched using the PHAOS A CTRL analog control unit

(art. no. 60 810 440)

• Bus wiring between PHAOS ANALOG luminaires uses an 8-core telephone cable with RJ45 telephone socket/connector

PHAOS lighting tube LED ANALOG 900 mm

230 V AC

PHAOS A

CTRL

60 810 440

Power supply unit 25 W

PHAOS A

LED lighting tube 900 mm

Power supply unit 25 W

PHAOS A

LED lighting tube 900 mm

Bus line 60 800 117

Power supply unit 25 W

PHAOS A

LED lighting tube 900 mm

1 master (separate analog control unit 60 810 440 must be used), up to 9 slaves (310 or 900 mm lighting tube)

PHAOS A XENO without separate control unit

230 V AC 1 master, 9 slaves Bus line 60 800 117

PHAOS ANALOG

230 V AC

PHAOS A

XENO

Power supply unit 8 W

Bus line 60 800 117

Use signal amplifier if more than 10 PHAOS A XENO LED spotlights are networked over analog bus. In this case, a separate power supply unit

(e.g. S7 003 150) is needed in order to provide the 24 V bus supply voltage

PHAOS A

XENO master

PHAOS A

XENO

PHAOS A

XENO

PHAOS A XENO with separate control unit

230 V AC 1 master, 9 slaves

PHAOS A

XENO LED

No. 10 resp.

No. 20 resp.

No. 30 etc.

Signal amplifier

60 810 441

PHAOS A

XENO LED

No. 11 resp.

No. 21 resp.

No. 31 etc.

Power supply unit 8 W

PHAOS A CTRL

60 810 440

PHAOS ANALOG, mixed group

230 V AC

PHAOS A

XENO

PHAOS A

XENO

PHAOS A

XENO

Bus line 60 800 117

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

PHAOS A

CTRL

60 810 440

PHAOS A

LED LK

PHAOS A

LED LK

PHAOS A

LED LK

PHAOS A

LED lighting tube 900 mm

Typical mixed group consisting of 1 master (separate analog control unit) and 9 slaves

(in this case, the first LED lighting tile could also function as a master)

PHAOS A

LED lighting tube 310 mm

PHAOS A

LED lighting tube 310 mm

PHAOS A

XENO

PHAOS A

XENO

PHAOS A

XENO

PHAOS DIGITAL

High-end dynamic lighting in variable colours

• Products are generally supplied with a default program

• Up to 14 colours can be mixed and stored

(stand-alone mode)

• Almost unlimited programming options via digital bus

• Program steps are detected via display

• Time setting for individual colours from 3 s to 3 hrs

• Defined dissolve/fading times for dynamic light

(fast, medium, slow)

• Program is stored in the event of a power failure

• Stand-alone function in the case of PHAOS lighting tile and PHAOS XENO LED

• Generally decentralised programming for PHAOS lighting tube

• Various decentralised programming options using

LUXMATE ® components

Please also refer to pages 40 to 42 for further product details and order wording, and to page 43 for installation and mounting tips.

P H A O S D I G I T A L B U S - C O N T R O L L E D 33

Stand-Alone

Easy-to-program PHAOS lighting tile LED DIGITAL and PHAOS XENO LED DIGITAL spotlight. The desired program steps are clearly visible on the rear display.

PHAOS DIGITAL

The digital bus enables control individual luminaires separately and independently.

• All PHAOS DIGITAL luminaires can be configured as a group

• No limit using a 2-wire digital bus

PHAOS XENO LED DIGITAL

PHAOS lighting tube LED DIGITAL

PHAOS lighting tile LED DIGITAL

Active Light perfection

Creative freedom thanks to separate control of individual bus devices

Selectively creating lighting scenes by controlled changes in the colour, intensity and direction of light – PHAOS DIGITAL opens up an entirely new world of design possibilities.

Touch panel for control and programming of several PHAOS

DIGITAL luminaire groups. It is possible to retrieve and display the settings of up to 20 lighting scenarios for 30 groups of luminaires.

LM-ZSQ (sequencer)

LM-BV (bus power supply, max. 100 bus devices)

Project-specific solutions available on request

LUXMATE engineer uses a

PC to carry out programming

PC interface

Please contact your nearest Zumtobel Staff representative if you have any queries regarding programming. We will be glad to advise you on the extensive design options available using PHAOS DIGITAL.

P H A O S D I G I T A L C O N F I G U R A T I O N S 35

PHAOS lighting tube LED DIGITAL 310 mm

230 V AC

LUXMATE 2-wire BUS

Power supply unit 25 W

Power supply unit 25 W

PHAOS D

LED lighting tube 310 mm

PHAOS D

LED lighting tube 310 mm

PHAOS D

LED lighting tube 310 mm

PHAOS D

LED lighting tube 310 mm

PHAOS XENO LED DIGITAL

230 V AC

30 or 95 PHAOS luminaires can be connected depending on the bus power supply used.

LUXMATE 2-wire BUS

PHAOS lighting tile LED DIGITAL

230 V AC LUXMATE 2-wire BUS

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

PHAOS D

LED LK

PHAOS D

LED LK

PHAOS D

LED LK

PHAOS D

XENO

PHAOS D

XENO

PHAOS D

XENO

PHAOS D

XENO

PHAOS DIGITAL, mixed group

230 V AC

LUXMATE 2-wire BUS

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

Power supply unit 25 W

PHAOS D

LED LK

PHAOS D

LED LK

PHAOS D

LED LK

PHAOS D

LED lighting tube 310 mm

PHAOS D

LED lighting tube 310 mm

PHAOS D

XENO

PHAOS D

XENO

LEDOS RGB recessed floor and wall luminaires

LEDOS RGB round

LEDOS RGB square

Ø 110

LEDOS concrete casting surround, round

120

110 x 110

120x120

111 c

Cat. no.

Luminaire housing

BEH D120 H Deep version, can be driven over*

Board unit

PLR 230V RGB

* Screw-fastened cover.

Cat. no.

Accessories

Floor concrete casting surround D111 (deep design) for S7710660 kg

0,8

Recessed floor and wall luminaire

• With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting as drive-over version

• Housing made of die-cast aluminium, titanium powder-coated

• Cover ring made of special steel

• Frosted cover glass

• Load carrying capacity up to 1000 kg/20 km/h

• Board unit must be ordered separately

• Can be installed in cavity or concrete wall

• Kit for cavity installation included in scope of supply

• IP 67 for installation in floor

• Protection class I

• Installed load: approx. 2.0 W c

Cat. no.

Luminaire housing

BEH Q120 H Deep version, can be driven over* kg Order no.

0,6 S7 710 670

Board unit

PLR 230V RGB

* Screw-fastened cover.

S7 711 050

Recessed floor and wall luminaire

• With screws in stainless-steel ring for cavity-wall/plaster fixing or floor mounting as drive-over version

• Housing made of die-cast aluminium, titanium powder-coated

• Cover ring made of special steel

• Frosted cover glass

• Load carrying capacity up to 1000 kg/20 km/h

• Board unit must be ordered separately

• Can be installed in cavity or concrete wall

• Kit for cavity installation included in scope of supply

• IP 67 for installation in floor

• Protection class I

• Installed load: approx. 2.0 W kg

0,1

Order no.

S7 710 660

S7 711 050

Order no.

S7 710 640

Concrete casting surround

• Casting surround made of polypropylene

• For installation of LEDOS RGB round (S7 710 660) in concrete or masonry

S7 710 640

LEDOS concrete casting surround, square

111x111

Cat. no.

Accessories

Floor concrete casting surround Q111 (deep design) for S7710670 kg Order no.

0,1 S7 710 650

Concrete casting surround

• Casting surround made of polypropylene

• For installation of LEDOS RGB square (S7 710 670) in concrete or masonry

S7 710 650

To specify e.g.: LEDOS RGB round BEH D120 H Deep version S7 710 660

L E D O S R G B I N S T A L L A T I O N

Installation in the floor

Installation in a veriety of different floor types: concrete, tiles, carpet, wood.

When installing LEDOS RGB in floors, we recommend star-shaped circuits.

LEDOS RGB Floor recessed (interior)

LEDOS RGB Ground recessed (exterior)

Truly water resistant for exterior installation

• At least 30 cm of gravel under the recessing box for good drainage

• Use flexible rubber sheathed cable, suitable for damp areas

• Tightly close PG gland

• Secure opposite screws of luminaire frame

2–30 mm

115 mm

Installation in ceilings and walls

(concrete/brick)

Vertical adjustment of recessed box in the wall to define the position of the luminaire housing.

Level installation

Wall thicknesses and recessed depth of 2–30 mm

Secure installation

Secure installation in carity walls (wood, plaster) with swivel brackets

37

Secure installation in carity walls Installation/wiring for wall-mounting

PHAOS ANALOG

PHAOS LED ANALOG lighting tile

PHAOS LED ANALOG lighting tube

31

23

150

228 x 228 xc

Cat. no.

Lighting tile

PHAOS A LED-LK

PHAOS Wall-mounted frame titanium

Accessories

Electronic transformer ETR 230V-AC/24V-DC/25 W

5 m bus line with RJ 45 coupling

LED luminaire (ANALOG) with variable colours

• Homogeneous light distribution

• Individually programmable and bus-compatible

• Protective low voltage: 24 V-DC

• Wattage: max. 16 W

• Surface mounting

• Variable installation position

• Wall and group mounting with mounting frame, titanium colour

• High impact resistant polycarbonate diffuser

• Low surface temperature

• Protection class III

• Electronic transformer S7 003 230 must be ordered separately kg Order no.

2,1

0,3

60 810 426

60 800 070

0,15

0,2

S7 003 230

60 800 117

355 xc

Cat. no.

Lighting tube for surface-mounting

PHAOS A LED-LR 310 AN

PHAOS A LED-LR 900 AN

Lighting tube for flush-mounting

PHAOS A LED-LR 310 UP

PHAOS A LED-LR 900 UP kg

0,7

Order no.

60 810 427

60 810 429

0,7 60 810 428

60 810 430

Accessories

Electronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230

5 m bus line with RJ 45 coupling 0,2 60 800 117

For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specialist electrical supplier.

LED luminaire (ANALOG) with variable colours

• Homogeneous light distribution

• Direct and indirect lighting effects thanks to flexible fastening

• Bus-compatible

• Protective low voltage: 24 V-DC

• Wattage: max. of 12 W (310 mm) or max. of 36 W (900 mm)

• Housing made of anodised aluminium

• High impact resistant polycarbonate diffuser

• Length: 310 mm resp. 900 mm

• Variable installation position

• Surface or flush mounting

• Low surface temperature

• Protection class III

• Electronic transformer S7 003 230 must be ordered separately

PHAOS XENO LED ANALOG

282 c

Cat. no.

Spotlight for surface mounting

PHAOS A XENO LED AN

5 m bus line with RJ 45 coupling

LED spotlight (ANALOG) with variable colours

• For floodlighting

• Individually programmable and bus-compatible

• Wattage: max. of 22 W

• Rotates through 365°

• Housing made of die-cast aluminium

• Colour: titanium

• High impact resistant polycarbonate diffuser

• Universal joint, pivots through 90°

• Can be installed on ceiling and on wall

• Low surface temperature kg Order no.

1,9

0,2

60 810 431

60 800 117

To specify e.g.: PHAOS LED ANALOG lighting tile PHAOS A LED-LK 60 810 426

PHAOS LINE E LED ANALOG

L E D M U L T I C O L O U R L U M I N A I R E S

P H A O S A N A L O G

c

Cat. no.

Surface-mounted luminaire

PHAOS-L A A360

PHAOS-L A A965

Recessed luminaire

PHAOS-L A E360

PHAOS-L A E965

Available Nov. 2002

39

Order no.

60 810 434

60 810 435

60 810 432

60 810 433

LED surface mounted luminaire

(ANALOG) with variable colours

• Technical lighting features designed for indirect lighting

• With wall-mounted fitting, pivots through ± 20°

• Horizontal or vertical installation

• Housing: aluminium extrusion/diecast aluminium

• Colour: titanium

• High impact resistant polycarbonate diffuser

• Wattage: max. of 12 W (360 mm)/ max. of 36 W (965 mm)

• Protection type IP65

• Protection class II

• Two PG13.5 cable glands (for looping)

• Controlled via 60 810 440 analog control unit (please order separately)

LED recessed floor/wall luminaire

(ANALOG) with variable colours

• Homogeneous light distribution

• Housing: aluminium extrusion/diecast aluminium

• Colour: titanium

• Cover frame made of V4A special steel

• Frosted safety glass

• Maximum load: 500 kg

• Wattage: max. of 12 W (360 mm) / max. of 36 W (965 mm)

• Protection type IP 67

• Protection class II

• Two PG13.5 cable glands (for looping)

• Controlled via 60 810 440 analog control unit (please order separately)

PHAOS LINE concrete casting box

Cat. no.

Accessories

Concrete floor casting surround L = 380 mm*

Concrete floor casting surround L = 1,000 mm*

* For exact dimensions, please contact your Zumtobel Staff representative.

Concrete casting surround

• Material: special steel

• With cover for sealing casting surround during concrete work

Order no.

60 810 436

60 810 437

120 ca.380/1000*

PHAOS transformer

PHAOS control unit, ANALOG

S7 003 230

120

80

72 w

Cat. no.

Transformer

Electronic transformer ETR 230V-AC/24V-DC/25 W kg Order no.

0,2 S7 003 230

Transformer

• Electronic transformer for LED modules

• High light output ratio

• Short-circuit breaking with automatic restart

• Overload protection with power feedback control

• Electrical connections: primary side: 2-pole plug-in terminal strip; secondary side: 2x2-pole plug-in terminal strip

• Only for use in typical interior applications

Cat. no.

kg

Accessories

5 m bus line with RJ 45 coupling 0,1

Analog control unit 0,1

Signal amplifier* 0,1

* Signal amplifier needed if more than 10 PHAOS ANALOG products per group.

Order no.

60 800 117

60 810 440

60 810 441

Control unit (ANALOG)

• For programming and control of PHAOS ANALOG luminaires

• Required for PHAOS lighting tube LED ANALOG and PHAOS LINE LED ANALOG

• Optionally PHAOS XENO LED ANALOG and PHAOS lighting tile LED ANALOG

• Voltage supply: 24 V-DC

• Bus connection via 8-pole bus line with RJ 45 coupling

• Can be installed in double UP55 flush socket

• Upright installation position

• Only for use in typical interior applications

PHAOS DIGITAL

PHAOS LED DIGITAL lighting tile

31

PHAOS LED DIGITAL lighting tube

23

150

228 x 228

355 c

Cat. no.

Lighting tile

PHAOS D LED-LK

PHAOS Wall-mounted frame titanium kg

2,1

0,3

Order no.

60 810 296

60 800 070

Accessories

Electronic transformer ETR 230V-AC/24V-DC/25 W

LED luminaire (DIGITAL) with variable colours

• Homogeneous light distribution

• Individually programmable and buscompatible

• Protective low voltage: 24 V-DC

• Wattage: max. 16 W

• Surface mounting

• Variable installation position

0,15 S7 003 230

• Wall and group mounting with mounting frame, titanium colour

• High impact resistant polycarbonate diffuser

• Low surface temperature

• Protection class III

• Electronic transformer S7 003 230 must be ordered separately c

Cat. no.

Lighting tube for surface-mounting

PHAOS D LED-LR 310 AN kg

0,7

Order no.

60 810 297

Lighting tube for flush-mounting

PHAOS D LED-LR 310 UP 0,7 60 810 298

Accessories

Electronic transformer ETR 230V-AC/24V-DC/25 W 0,15 S7 003 230

For cavity-wall or flush mounting, please order UP55 flush sockets separately at your specialist electrical supplier.

LED luminaire (DIGITAL) with variable colours

• Homogeneous light distribution

• Direct and indirect lighting effects thanks to flexible fastening

• Bus-compatible

• Protective low voltage: 24 V-DC

• Wattage: max. 9 W

• Housing made of anodised aluminium

• High impact resistant polycarbonate diffuser

• Length: 310 mm

• Variable installation position

• Surface or flush mounting

• Low surface temperature

• Protection class III

• Electronic transformer S7 003 230 must be ordered separately

PHAOS XENO LED DIGITAL

282 c

Cat. no.

Spotlight for surface mounting

PHAOS D XENO LED AN

LED spotlight (DIGITAL) with variable colours

• For floodlighting

• Individually programmable and bus-compatible

• Wattage: max. 16 W

• Rotates through 365°

• Housing made of die-cast aluminium

• Colour: titanium

• High impact resistant polycarbonate diffuser

• Universal joint, pivots through 90°

• Can be installed on ceiling and on wall

• Low surface temperature kg Order no.

1,9 60 710 028

PHAOS transformer

120

72 w

Cat. no.

Transformer

Electronic transformer ETR 230V-AC/24V-DC/25 W kg Order no.

0,2 S7 003 230

Transformator

• Electronic transformer for LED modules

• High light output ratio

• Short-circuit breaking with automatic restart

• Overload protection with power feedback control

• Electrical connections: primary side: 2-pole plug-in terminal strip; secondary side: 2x 2-pole plug-in terminal strip

• Only for use in typical interior applications

To specify e.g.: PHAOS LED DIGITAL lighting tile PHAOS D LED-LK 60 810 296

Control and programming touch panel

120

200

4

L E D M U L T I C O L O U R L U M I N A I R E S

L U X M A T E P R O F E S S I O N A L

Cat. no.

LM-CPA Colour display

LM-MPA Monochrome display

45

• Touch panel for programming and control of the LUXMATE system in individual rooms

• ON/OFF

• 20 lighting scenes can be called up

• Further control of the lighting, blinds, air conditioning services etc.

• Optional: Additional momentary-action switches for ON/OFF and scenes

41

Order no.

22 146 153

22 146 166

Time-automation dynamism

70 59

Cat. no.

LM-ZSQ

Order no.

20 975 720

• For dynamic lighting sequences and for time-based control of LUXMATE system

• For all dynamic sequences, without PC programming

• Automatic change of lighting scenes

• Adjustable dissolve speeds

• Automatic switch-on/off times

• Installation: on 35 mm rail

Bus supply room/switch cabinet

35 59

Cat. no.

LM-BVS35

Order no.

22 115 026

• Zur Spannungsversorgung eines Busbezirks mit maximal 30 PHAOS DIGITAL

Produkten

• Montage: auf 35-mm-Hutschiene

Alternatively Order no. 20 975 247 LM-BV EO2 for 100 Bus components (95 PHAOS)

Notes on installation

355°

Cable outlet

163

Drilled holes for screws

Ø 4 for wall plugs

Ø 229

Lighting tile – wall-mounting

The PHAOS lighting tile LED ANALOG or DIGITAL can be easily wall-mounted using the wall mounting frame

(art. no. 60 800 070).

60

146

Installing a lighting tube using wall mounting bracket

Allow for distance to power outlet when installing the wall mounting bracket.

A

71

A

Direct installation without a wall mounting bracket

Dimensions for flush and cavity-wall sockets for fixing

LED lighting tube: 310 mm (A = 239 mm) and 900 mm

(A = 829 mm).

P H A O S A N A L O G + D I G I T A L I N S T A L L A T I O N 43

PHAOS ANALOG control unit

(art. no. 60 810 440)

Installed using double UP 55 flush socket in brickwork or cavity walls

• Control voltage 24 V DC, 2-wire

• RJ 45 socket for 8-core control line

• IP 20 when installed indoors

• Upright mounting position

PHAOS ANALOG

No-tool bus connection with 8-core telephone cable and RJ 45 connector

PHAOS DIGITAL

2-wire bus line

I N D U S T R Y

A N D E N G I N E E R I N G

T R A N S I T A R E A S

A N D C A R P A R K S

P R E S E N T A T I O N

A N D R E T A I L

A R T

A N D C U L T U R E

S P O R T

A N D L E I S U R E

O F F I C E S

A N D E D U C A T I O N

H O T E L S

A N D C A T E R I N G

H E A L T H &

C A R E

Throughout the world, Zumtobel Staff is the competent reliable partner for innovative lighting solutions in all areas of application of professional interior lighting:

Industry and Engineering

Sport and Leisure

Transit areas and Car parks

Offices and Education

Presentation and Retail

Hotels and Catering

Art and Culture

Health & Care

Orientation and Safety

Active Light

With production plants in Austria,

Germany, Australia and the USA, and sales organisations in all major European markets as well as commercial agencies in most regions of the world,

Zumtobel Staff is one of the biggest international enterprises in the lighting sector.

As a leader in innovation, we guarantee our customers global competence in lighting consulting and design assistance, superior product quality and future-proof technologies – from individual luminaires to electronic lighting management systems.

Corporate goal: We want to use light to create worlds of experience, make work easier and improve communications and safety while remaining fully aware of our responsibility to the environment.

Track and spots

Lighting systems

Downlights/uplights

Recessed luminaires

Surface-mounted and pendant luminaires

Wallwashers

Uplights, wall lights and task lights

Batten luminaires and continuous row luminaires

High-bay reflector luminaires

Luminaires of higher protection

Lighting management

Emergency lighting

Hospital trunking

United Kingdom

Zumtobel Staff Lighting Ltd.

Unit 4 - The Argent Centre,

Pump Lane

Hayes/Middlesex UB3 3BL

Tel. +44/(0)20 8589 1800

Fax +44/(0)20 8756 4800

USA/Canada/Mexico

Zumtobel Staff Lighting

3300 Route 9W

Highland, New York 12528

Tel. +1/(0)845/691 62 62

Fax +1/(0)845/691 62 89 http://www.zumtobelstaffusa.com

Australia

Zumtobel Staff (Australia) Pty. Ltd.

2 Wella Way

2250 AUS-Somersby, NSW

Tel. +612/(0)43/402 140

Fax +612/(0)43/402 108

Head offices

Zumtobel Staff GmbH

Schweizer Strasse 30

Postfach 72

A-6851 Dornbirn, AUSTRIA

Tel. +43/(0)5572/390-0

Fax +43/(0)5572/22 826

Zumtobel Staff GmbH & Co. KG

Grevenmarschstr. 74-78

D-32657 Lemgo, GERMANY

Tel. +49/(0)5261/2 12-0

Fax +49/(0)5261/2 12-9000

International Freephone/fax numbers:

Tel. 00800 THE LIGHT or 00800 843 54448

Fax 00800 0843 5444

E-Mail: [email protected]

http://www.zumtobelstaff.com

Art.-No. 04 797 310-UK 10/02 © Zumtobel Staff

Technical data was correct at time of going to press.

We reserve the right to make technical changes without notice.

Please contact your local sales office for further information.

Printed on environmentally-friendly chlorine-free paper. Printed on Luxosamt Offset.

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement