TP-Link Archer D9 Quick Installation Guide

Quick
Installation Guide
AC1900 Wireless Dual Band Gigabit
ADSL2+ Modem Router
7106505166
1. Connecting the Hardware
1
2
Connect the splitter, computer and power adapter as follows. Then turn on the modem router.
Check the following LED lights to ensure
the hardware connection is correct.
Phone Jack
Splitter
ADSL
WPS
WiFi
ON/OFF
USB 3.0
LAN1
LAN2
LAN3
LAN4/WAN
POWER
ON/OFF
POWER
Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.
Power
ADSL
LAN
On
On
On
Note: Please wait for 1-2 minutes until the ADSL LED is on.
2. Configuring the Modem Router
Method 1 Via Web Browser
1
Connect your computer to the modem router (Wired or Wireless).
Wired
USB 3.0
LAN1
LAN2
Wireless
LAN3
LAN4/WAN
POWER
ON/OFF
POWER
Or
Ethernet cable
2
a
Connect wirelessly by using
the default network name
(SSID) and password on the
product label printed on the
bottom of the modem
router.
Model:Archer D9
S/No.:XXXXXXXXXXXXX
ver:1.0
Wireless Password /PIN
MAC:XXXXXXXXXXXX
Open a web browser on the computer and configure the modem router according to the following main clues.
Enter http://tplinkmodem.net or 192.168.1.1 in
the address bar. Type in admin for both the user
name and password and click OK.
b
Choose Quick Setup in the main menu and then click
Next to start the configuration. Select your Region and
Time Zone from the drop-down list, and then click Next.
C
Select Yes to auto detect your connection type and then click
Next to continue.
Note: If the login window does not appear, please refer to
FAQ->Q1.
Quick Setup-Auto Detection
Quick Setup-Region and Time Zone
http://tplinkmodem.net
Auto-Detect Connection Type:
admin
Region
XXXXXX
Time Zone
XXXXXXXXXX
Yes.
No. I want to configure the Internet connection myself.
admin
Login
d
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
Quick Setup-PPPoE
Click Next to continue.
Note: You may rename your 2.4GHz/ 5GHz wireless network name and create
your own password.
Wireless Network Name:
DSL PVC: 8/35
Encapsulation Mode: LLC
Connection Type: PPPoE
TP-LINK_XXGHz_XXXXXX
Channel:
Mode:
Security:
Username: XXXXXX
Password: XXXXXX
Confirm Password: XXXXXX
Password:
Next
Back
f
Click Save and wait for your settings to take effect. Click
Finish to complete the setup.
Quick Setup-Complete
Quick Setup-Wireless 2.4GHz & 5GHz
Auto-detection has succeeded!
Back
e
Next
Back
Next
Back
XXXXXXXX
Next
Time Zone Configuring:
Success
Operation Mode Configuring:
Success
WAN Connection Configuring:
Success
Gateway and DNS Configuring:
Success
Wireless Configuring:
Success
Finish
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !
REV1.0.2
Method 2 Via CD Setup Wizard
Note: If you are using a computer that cannot run the mini CD, please refer to Method 1 for configuration.
a
b
Insert the TP-LINK Resource CD into the
CD-ROM drive.
Choose your language and select Archer D9. Then
click Start Setup.The Easy Setup Assistant will
guide you through the setup process.
c
Click FINISH to complete the setup.
Welcome
Note: If the main page does not display on your computer,
browse the files on the CD and double click Autorun.exe.
Install ADSL Device
Configure ADSL Device
Choose your language:
Congratulations!
Confirm Settings
English
FINISH
Archer D9
Start Setup
User Guide
Enjoy!
Printer Sharing Setup
Browse CD
Now your wired and wireless devices can connect
to the Internet !
EXIT
Tether App
After connecting to the Internet via Web Browser or via CD Setup Wizard
TP-LINK's Tether App lets you manage the modem router on smart devices. You can:
View the information about clients.
Then, how to start?
1 Scan the QR code and download the TP-LINK Tether App from App
Store or Google Play.
Block or Unblock client's access to the Internet.
Use Parental Control to limit kid's access to the Internet.
Configure some basic settings for the modem router.
2
3
Ensure your smart device is wirelessly connected to the modem router.
Launch the Tether App, and enjoy the easy management of the modem router.
USB Features
The USB 2.0&3.0 ports can be used for
media sharing, storage sharing and print
sharing across your local network. You can
also set up the FTP server to access your
files remotely by connecting to the Internet.
USB 2.0
locates on the side panel
USB 2.0&3.0 sharing ports
Note: To learn more about the USB features, please visit
http://tp-link.com/app/usb, retrieve Resource CD or simply
scan the QR code.
Remote
Access via
FTP Server
Media
Sharing
Local
Storage
Sharing
Printer
Sharing
Frequently Asked Questions (FAQ)
Q1. What can I do if the login window does not appear?
Q3. How do I restore the modem router to its factory default settings?
A1. If the computer is set to a static or fixed IP address, change it to obtain an IP address
automatically.
A2. Verify http://tplinkmodem.net or 192.168.1.1 is correctly entered in the web browser
and press Enter.
A3. Use another web browser and try again.
A4. Reboot your modem router and try again.
A5. Disable the network adapter used currently and then enable it again.
A1. With the modem router powered on, press and hold down
the RESET Button on the side panel of the modem router for
approximately 8 seconds.
A2. Log on to Web Management page of the
modem router, and go to System Tools->Factory Defaults,
click Restore, then wait until the progress bar loading
finished.
Q2. What can I do if I cannot access the Internet?
A1. Check your cables and make sure they are all plugged in correctly, including the
telephone line, Ethernet cables and power adapter.
A2. Check to see if you can log on to the Web-Management page of the modem router.
The default address of the Web-Management page is http://tplinkmodem.net or
192.168.1.1. If you can, try the following steps. (If you can not, please set your
computer to obtain an IP address automatically and then try to access the Internet
again.)
A3. Consult your ISP and make sure all the VPI/VCI, Connection Type, account
username and password are correct. If they are not, please replace them with the
correct settings and try again.
A4. If you still cannot access the Internet, please restore your modem router to its
factory default settings and reconfigure your modem router following the instructions
in this QIG.
A5. Please contact our Technical Support if the problem still exists.
RESET Button Press & Hold
8 seconds
Q4. What can I do if I forget my password?
Web Management page password:
Restore the modem router to its factory default settings and then use the default User Name ‘admin’ and
Password ‘admin’ to log in.
Wireless Network password:
A1.The factory default password can be found on the product label printed on the back of the modem router.
A2. If you have changed your password, log on to the modem router’s Web Management
page, go to Wireless>Wireless Security to obtain or reset your password.
Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/support/faq and click
Contact Technical Support for further assistance.
LED Indicators
Name
Status
Indication
On
System start-up complete.
Flashing
Off
System starting up or device updating.
Power is off.
(ADSL)
On
Flashing
Off
ADSL line is synchronized and ready to use.
The ADSL negotiation is in progress.
ADSL synchronization fails.
(Internet)
On
Off
The network is available with a successful Internet connection.
There is no successful Internet connection or the modem router is operating in Bridge mode.
(Wireless
2.4GHz)
On
Off
The wireless 2.4GHz band is working properly.
The wireless 2.4GHz band is disabled.
(Wireless
5GHz)
On
Off
The wireless 5GHz band is working properly.
The wireless 5GHz band is disabled.
On/Off
Slow Flash
It turns on when a wireless device has been successfully connected to the network via WPS.
After about 5 minutes, the WPS LED will turn off.
A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes.
(LAN)
On
Off
At least one LAN port is connected .
No LAN port is connected.
(USB)
On
Flash
Off
The inserted USB device is identified and ready to use.
A new USB device is being identified.
No USB device is plugged in.
(Power)
(WPS)
©2015 TP-LINK