TP-LINK TD-W8970 300Mbps Wireless N Gigabit ADSL2+, 300Mbps Wireless N Gigabit ADSL2+ Wireless Modem Router Quick Installation Guide
Below you will find brief information for Wireless Modem Router TD-W8970 300Mbps Wireless N Gigabit ADSL2+, Wireless Modem Router TD-W8970B 300Mbps Wireless N Gigabit ADSL2+. This guide will help you to connect your devices step by step following the figure. It walks you through the basic configuration steps to get your internet connection up and running . You can also find information about the modem router LEDs, troubleshooting tips and how to manage your modem router wireless network settings.
PDF
Download
Document
Advertisement
Advertisement
TP-LINK The Reliable Choice Quick Installation Guide 300Mbps Wireless N Gigabit ADSL2+ Modem Router Please select your preferred setup wizard. CD Setup Wizard For Windows users only Web-based Quick Setup Wizard For Mac OS/Linux/Windows users who are unable to run the Resource CD MODEL NO. TD-W8970/TD-W8970B Web-based Quick Setup Wizard E Hardware connection. E Phone Cable LE À ЭМП TIN EN Splitter PHONE MODEM Package Contents The product model shown in this QIG is TD-W8970, as an example. Resource CD < i—un ADSL Splitter Phone Cable x 2 enna O Necessary Information For a smoother setup, we suggest that you consult your ISP first and ask for the following information . This information will be used during the configuration stage. vPINCI — — Connection Type: Encapsulation Type (Optional): Wall Socket ZA u ee `_* Phone Cable 7106504397 REV1.1.0 № ПЕЙ оао | Computer Ethernet Cable # CD Setup Wizard ( For Windows users only ) 1 Insert the TP-LINK Resource CD into the CD-ROM drive. BE) Select your product model and click Start Setup. В Then a flash video will pop up and show you how to connect your devices. When you finish the hardware connection, click to continue. Та The Easy Setup Assistant will start. Please check to see if the LEDs (especially the ADSL LED) of your modem router display normally as the chart describes. Then click NEXT, and follow the step-by-step instruction until you complete the configuration. E NN << rr а > не, a (ae The Reliable Choice == Wireless ADSL2+ Modem Router Welcome . E LED Indicator Description Install ADSL Device — Configure ADSL Device EST ET = — e outer is powered on, Confirm Settings (WLAN) Flash Wireless is enabled On There is a device connected to this LAN port. (LAN 1-4) ; ; а ; Flash The modem router is sending or receiving data over this LAN port. If the LEDs d a in tha rh connection. Otherwise, please click NEXT to continue. NEXT EXIT For the advanced configurations, please refer to the User Guide on the Resource CD provided. You can also log on to www.tp-link.com -> NE — select your region -> search for the product -> User Guide can be found under the “Download” tab on the product page. ( For Mac OS/Linux/Windows users who are unable to run the Resource CD) Step 1: Connect your devices step by step following the figure. Step 2: Power on all your devices and then check the LEDs (especially the ADSL LED). Name Status Indication (0) (Power) On The modem router is powered on. on ADSL line is synchronized and ready «5» (ADSL) to use. Flashing | ADSL negotiation is in progress. 2 (WLAN) | Flashing | Wireless is enabled. On There is a device conneted to this LAN G3 (LAN 1-4) port. Flashing | The modem router is sending or receiving data over this LAN port. El Open your browser and type http://192.168.1.1 in the address field. Then use the default user name admin and password admin to log in. 2 TD-W8970 - Microsoft Internet Explorer, File Edit View Favorites Tools Help a |) La A £ ) Search 7 Favorites € T =F = Address [@ http://192,168,1,1/ | м | Е] ео Copyright ©2013 TF-LINÉ Technologies Co,, Ltd, All rights reserved, “E | Done Internet 8] © If you are unable to access 192.168.1.1, please у refer to T3 in Troubleshooting. В Click Quick Setup in the main menu and then click Next. Quick Setup - Start This guide will help wou set basic parameters for Internet connection. Please click NEXT to continue. For funcitan or parameters in details, please click the corresponding menu an the left. | Next | Web-based Quick Setup Wizard ( For Mac OS/Linux/Windows users who are unable to run the Resource CD) a Enter the VPI and VCI values given by your ISP and then click Next. Quick Setup - DSL Please enter the VPI/VCI provided by your ISP(Internet Service Provider). VPI: |= (Range: 0-255) VEI: [35 (Range: 1-65535) If you don’t have the VPI/VCI information, please 9 contact your ISP for this information. В Select the ADSL Connection Type given by your ISP and then click Next. Here we use PPPoE as an example. Quick Setup - ADSL Connection Type Please select the connection type provided by your ISP. @ PPPoE (Require a username and password, PPP over Ethernet) © PPPoA (Require a username and password, PPP over ATM) © Dynamic IP (Get dynamic IP from ISP, also called IPoE Dynamic IP) © Static IP (Manually set the static IP address provided by your ISP, also called IPoE Static IP) © IPoA (Manually set the static IP address provided by your ISP, also called IP Over ATM) © Bridge (Dial up from the single computer or router) ео [СН If you don’t have the ADSL Connection Type 49 information, please contact your ISP for this information. Troubleshooting 6 Enter the Username and Password provided by your ISP and then click Next. Quick Setup - PPPoE Please enter ADSL Username and Password. If you forget them, please consult your ISP. Username: Password: Confirm Password: Previous | Record your PPPoE information here: Username: Password: The WLAN function is enabled by default. Create an easy-to-remember Wireless Network Name (SSID). It is also strongly recommended to set a password for the wireless network to prevent outside intrusion. Click NEXT to continue. Wireless Network Name: TP-LINE_130969 (Also called SSID) Region: (United States $] States bh channel: Mode: | 11bgn mixed м Security: © WPA-PSK/WPA2-PSK (Recommended) Password (Enter ASCII characters between & and 63 or Hexadecimal characters between 6 and 64.) © Disable Wireless Security Back Next Note Please confirm all the parameters. Click Back to modify them or click Save to save your settings. The Quick Setup is completed. Please confirm all the parameters below. Click BACK button to modify or click SAVE button to save your configuration Parameters Summary DSLPVC: 8/35 Connection Type: PPPoE Username: username Password: * Wireless: Enabled Wireless Network Name(SSID): TP-LINK_ 130969 Region: United States Channel: Auto Mode: 11bgn mixed Security: WPA-PSK/WPA2-PSK Wireless Password: 012345676 Note: Some connection will be deleted: (pppoe_8_35_2_d) Back Save Record your wireless information here: SSID: Wireless Password: Quick Setup has completed. Click Finish to make your settings take effect. Quick Setup - Complete Setup status Gateway and DNS Configuri Wi-Fi Configurin = 3 5 35 5 еее 5 Success Success 5 WAN Settings page Note: If , please click "Network For the advanced configurations, please log on to www.tp-link.com -> select your region -> search for the product -> User Guide can be found under the “Download” tab on the product page. T1. How can | restore my modem router's configuration to its factory default settings? Once the modem router is reset, the current settings will be lost and you will need to reconfigure the modem router. We strongly suggest you back up the current settings before resetting the modem router. With the modem router powered on, use a pin to press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. T2. What can | do if | forget my password? Reset the modem router first and then use the default user name and password: admin/admin. T3. What can | do if | cannot access 192.168.1.1? For Mac OS X Click the Apple icon on the upper left corner of the screen. Go to “System Preferences -> Network”. Select Airport on the left menu bar, and then click Advanced for wireless configuration; or select Ethernet for wired configuration. In the Configure IPv4 box under TCP/IP, select Using DHCP. Click Apply to save the settings. For Windows 7 Click “Start -> Control Panel -> Network and Internet -> View network status -> Change adapter settings”. Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows XP Click “Start -> Control Panel -> Network and Internet Connections -> Network Connections”. Right-click Wireless Network Connection (or Local Area Connection), and then click Properties. Select Internet Protocol (TCP/IP), and then click Properties. Select Obtain an IP address automatically and Obtain DNS server address automatically. Then click OK. For Windows 8 Move your mouse to the lower right corner and you will see Search icon in the Popups. Go to Apps, type Control Panel in the search box and press Enter. Go to “Control Panel -> View network status and tasks -> Change adapter settings”. Right-click Ethernet and then select Properties. Double-click Internet Protocol Version 4 (TCP/IPv4). Select Obtain an IP address automatically, choose Obtain DNS server address automatically and then click OK. T4. What can | do if | cannot access the Internet? 1) Check your cables and make sure they are all plugged in securely, including the telephone line, Ethernet cables and power adapter. 2) Checkto see if you can log on to the web management page of the modem router. The default IP address of the web management page is 192.168.1.1.If you can, try the following steps. (If you are unable to access the web management page , please refer to T3 and then try to access the Internet again after following those steps.) 3) Consult your ISP and make sure all the VPI/VCI, Connection Type, account username and password are correct. If they are not, please repleace them with the correct settings and try again. 4) If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router following the instructions in this QIG. 5) Please feel free to contact our Technical Support if the problem still exists. T5. How can | configure the USB features? Please refer to our Application Guides. They can be found on the resource CD, or on the web. [=] [=] 1) CD Access: Open Resource CD and find the ==. folder named “Application Guide”. The guides can be found inside this folder. [=] 2) Web Access: http://www.tp-link.com/app/usb For more details about Troubleshooting and IEE Technical Support contact information, please log on to our Technical Support [=] mE website: http://www.tp-link.com/en/support = a = Technical Support H For more troubleshooting help, goto http://www.tp-link.com/en/support/faq № To download the latest Firmware, Driver, Utility and User Guide, go to http://www.tp-link.com/en/: t/ Er № For all other technical support, please contact us by using the following details: Global Tel: +86 755 2650 4400 Fee: Depending on rate of different carriers, IDD. E-mail: [email protected] Service time: 24hrs, 7 days a week USA/Canada Toll Free: +1 866 225 8139 E-mail: [email protected](USA) [email protected](Canada) Service time: 24hrs, 7days a week UK Tel: +44 (0) 845 147 0017 Fee: Landline: 1p-10.5p/min, depending on the time of day. Mobile: 15p-40p/min, depending on your mobile network. E-mail: [email protected] Service time: 24hrs, 7days a week Turkey Tel: 0850 7244 488 (Turkish Service) Fee: Depending on rate of different carriers. E-mail: [email protected] Service time: 09:00 to 21:00, 7days a week Brazil Toll Free: 0800 608 9799(Portuguese Service) E-mail: suporte.bretp-link.com Service time: Monday to Friday, 09:00 to 20:00; Saturday, 09:00 to 15:00 Italy Tel: +39 023 051 9020 Fee: Depending on rate of different carriers. E-mail: support.itetp-link.com Service time: Monday to Friday, 09:00 to 13:00; 14:00 to 18:00 Indonesia Tel: (+62) 021 6386 1936 Fee: Depending on rate of different carriers. E-mail: support.idetp-link.com Service time: Sunday to Friday, 09:00 to12:00, 13:00 to 18:00 *Except public holidays Germany / Austria Tel :+49 1805 875465 (German Service) +49 1805 TPLINK +43 820 820 360 Fee: Landline from Germany: 0.14EUR/min. Landline from Austria: 0.20EUR/min. E-mail: [email protected] Service Time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+1 or GMT+2 (DST in Germany) * Except bank holidays in Hesse TP-LINK TECHNOLOGIES CO., LTD. Australia / New Zealand Tel: NZ 0800 87 5465(Toll Free) AU 1300 87 5465(Depending on 1300 policy.) E-mail: [email protected] (Australia) [email protected] (New Zealand) Service time: 24hrs, 7 days a week Singapore Tel: +65 6284 0493 Fee: Depending on rate of different carriers. E-mail: support.sgetp-link.com Service time: 24hrs, 7 days a week Ukraine Tel: 0800 505 508 Fee: Free for Landline; Mobile: Depending on rate of different carriers. E-mail: [email protected] Service time: Monday to Friday, 10:00 to 22:00 Malaysia Toll Free: 1300 88 875465 E-mail: support. [email protected] Service time: 24hrs, 7days a week Poland Tel: +48 (0) 801 080 618 +48 223 606 363 (if calls from mobile phone) Fee: Depending on rate of different carriers. E-mail: support.pletp-link.com Service time: Monday to Friday, 09:00 to 17:00. GMT+1 or GMT+2 (DST) Switzerland Tel: +41 (0)848 800998 (German Service) Fee: 4-8 Rp/min, depending on rate of different time. E-mail: [email protected] Service time: Monday to Friday, 09:00 to 12:30 and 13:30 to 18:00. GMT+ 1 or GMT+ 2 (DST) France Tel: 0820 800 860 (French service) Fee: 0.118 EUR/min from France Email: [email protected] Service time: Monday to Friday, 09:00 to 18:00 *Except French Bank holidays Russian Federation Tel: 8 (499) 754 5560(Moscow NO.) 8 (800) 250 5560 (Toll-free within RF) E-mail: [email protected] Service time: From 10:00 to 18:00 (Moscow time) *Except weekends and holidays in RF www.tp-link.com J ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Black
- Wi-Fi 4 (802.11n) 300 Mbit/s
- Gigabit Ethernet
- DSL WAN
- Ethernet LAN (RJ-45) ports: 4
- Web-based management Quality of Service (QoS) support