Quick Installation Guide
150Mbps Wireless N Router
Package Contents
TL-WR720N
Ethernet Cable
Power Adapter
Resource CD
150Mbps Wireless N Router
MODEL NO. TL-WR740N/TL-WR741ND
QIG
MODEL NO. TL-WR720N
2
Configuration for Windows with Setup Wizard
If you are using a MAC/Linux or a Windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration.
1 Insert the TP-LINK Resource CD into the CD-ROM drive.
3 Select your language from the drop-down menu. Click
START and the Easy Setup Assistant will guide you step by step to set up the Router.
1
Hardware Connection
Wall Socket
Wall Socket
Internet
Cable/DSL Modem
4
5
WPS/
RESET POWER WAN 1 2
Computer
2
3
3
4
5
1
2
Power off your modem.
Connect the WAN port on your Router to the modem’s LAN port with an Ethernet cable.
Connect your computer to one of the LAN ports labeled 1~2 on the Router with an Ethernet cable.
Power on the modem and wait for one minute .
Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket.
5 After the connectivity is checked successfully, please click
NEXT.
7 You can rename your wireless network on this page.
The default wireless name is TP-LINK_XXXXXX. Click
NEXT to continue.
2 Select TL-WR720N and click Easy Setup Assistant.
4 After confirming the hardware connection and the status of LEDs, please click NEXT to continue.
6 Select the WAN connection type your ISP provides and click
NEXT. Here we take Dynamic IP for example.
8 You are recommended to select Most Security
(WPA2-PSK) to secure your wireless network.
The Router is pre-encrypted.
The default wireless password, the same as the PIN code, is printed on the label at the bottom of the
Router.
(To be continued)
7106503893
9
2
Configuration for Windows with Setup Wizard
(continued)
After confirming the configurations, click NEXT to continue. 11 Click FINISH to close the wizard.
Appendix 1: Configuring the Router via Web Management Page
(for Mac OS X/Linux users or Windows users who can’t run the mini CD)
1 Open your browser and type http://tplinklogin.net in the address field, then use the user name admin and password admin to log in.
4 The Dynamic IP is the suitable connection type for most cases. Here we take it as an example. On the next page, you can rename your wireless network and create your own password on this page. The default wireless name is
TP-LINK_XXXXXX, and the default wireless password, the same as the PIN code, is printed on the bottom label. Click Next to continue.
10
You can save these settings in a text file on your desktop. If you forget the Network Security Key, you can check the Router Settings.txt.
After the configuration is completed successfully, please click NEXT.
You can click WEB management interface for more advanced settings.
12 The basic settings for your Router are completed. You can go to http://www.tp-link.com to verify the
Internet connection.
2 Click Quick Setup in the main menu and click Next.
3 Select the WAN connection type provided by your ISP.
Or you can select Auto-Detect and click Next to continue.
5 Click Reboot or Finish to make your settings take effect.
Appendix 2: Troubleshooting
1. What can I do if I cannot access the Internet?
1) Check to verify all connections are connected properly.
Try with different Ethernet cables to ensure they are working properly.
2) Check to see if you are able to access the Router’s web management page. If not, please refer to “What can I
do if I cannot open the web management window?”.
3) Please log in the web management page
(http://tplinklogin.net), click the menu “Network >
WAN”, and ensure that the WAN Connection Type is
Dynamic IP; this is the suitable connection type for most
DSL/Cable modems and other networks.
4) For cable modem users, please click menu “Network >
MAC Clone”. Click Clone MAC Address button and then click Save. Reboot the modem first and then the
Router, try to access the Internet from your computer. If the problem persists, please go to the next step.
2. What can I do if I cannot open the web management window?
1) For Windows 7/Vista
Go to ‘Start > Settings > Control Panel’. Click ‘View
network status and tasks > View status > Properties’ and double-click ‘Internet Protocol Version 4
(TCP/IPv4)’. Select ‘Obtain an IP address automatically’, choose ‘Obtain DNS server address automatically’ and click ‘OK’.
2) For Windows XP/2000
Go to ‘Start > Control Panel’. Click ‘Network and
Internet Connections > Network Connections’.
Right-click ‘Local Area Connection’, select ‘Properties’ and then double-click ‘Internet Protocol (TCP/IP)’. Select
‘Obtain an IP address automatically’, choose ‘Obtain
DNS server address automatically’ and click ‘OK’.
5) Connect your computer directly to your modem and attempt to access the Internet. If you are still unable to access the Internet, please contact your internet provider for further assistance.
3. What can I do if I forget my password?
1) For default wireless password:
Please refer to the “Wireless Password/PIN” labeled
on the bottom of the Router.
2) For the web management page password:
Reset the Router first and then use the default user
name and password: admin, admin.
4. How do I restore my Router’s configuration to its factory default settings?
If your router does not work properly, you can reset it and then configure it again. With the Router powered on, press and hold the WPS/RESET button on the rear panel for approximately 8 seconds before releasing it.
WPS/
WPS/
RESET POWER WAN 2 1 2
Technical Support
For more troubleshooting help, go to www.tp-link.com/support/faq.asp
To download the latest Firmware, Driver, Utility and User Guide, go to www.tp-link.com/support/download.asp
For all other technical support, please contact us by using the following details:
Global
Tel: +86 755 26504400
E-mail : [email protected]
Service time: 24hrs, 7days a week
Singapore
Tel: +65 62840493
E-mail: [email protected]
Service time: 24hrs, 7days a week
UK
Tel: +44 (0) 845 147 0017
E-mail: [email protected]
Service time: 24hrs, 7days a week
USA/Canada
Toll Free: +1 866 225 8139
E-mail: [email protected]
Service time: 24hrs,7days a week
Malaysia
Tel: 1300 88 875465 (1300 88TPLINK)
E-mail: [email protected]
Service time: 24 hrs a day,
7days a week
Turkey
Tel: 444 19 25(Turkish Service)
E-mail: [email protected]
Service time: 9:00 AM to 6:00 PM,
7days a week
Poland
Tel: +48 (0) 801 080 618 / +48 22
7217563 (if calls from mobile phone)
E-mail: [email protected]
Service time: Monday to Friday 9:00 AM to 5:00 PM. GMT+1 or GMT+2
(Daylight Saving Time)
Germany / Austria
Tel :+49 1805 875465 (German Service)
+49 1805 TPLINK
E-mail: [email protected]
Fee: 0.14 EUR/min from the German fixed phone network and up to 0.42
EUR/min from mobile phone
Service Time: Monday to Friday 9:00 AM to 6:00 PM. GMT+1 or GMT+2
(Daylight Saving Time in Germany)
* Except bank holidays in Hesse
Australia & New Zealand
Tel: AU 1300 87 5465
NZ 0800 87 5465
E-mail: [email protected]
Italy
Tel: +39 02 66987799
E-mail: [email protected]
Service time: 9:00 AM to 6:00 PM, from Monday to Friday
Ukrainian
Tel: +380 (44) 590-51-14
E-mail: [email protected]
Service time: Monday to Friday
14:00 PM to 22:00 PM
Brazilian
Toll Free: 0800-770-4337
(Portuguese Service)
E-mail: [email protected]
Service time: Monday to Saturday
08:00 AM to 08:00 PM
Indonesia
Tel: (+62) 021 6259 135
E-mail : [email protected]
Service time : Monday to Friday
9:00 -12:00; 13:00 -18:00
*Except public holidays
Switzerland
Tel: +41 (0) 848 800998 (German Service)
E-mail: [email protected]
Fee: 4-8 Rp/min, depending on rate of different time
Service time: Monday to Friday 9:00 AM to
6:00 PM. GMT+ 1 or GMT+ 2
(Daylight Saving Time)
Russian Federation
Tel: 8 (499) 754-55-60
8 (800) 250-55-60
(toll-free call from any RF region)
E-mail: [email protected]
Service time: from 10:00 to 18:00
(Moscow time)
*Except weekends and holidays in
Russian Federation
TP-LINK TECHNOLOGIES CO., LTD.
www.tp-link.com