TP-LINK TL-WR841N D Wireless Router Quick Installation Guide
Below you will find brief information for Wireless Router TL-WR841N, Wireless Router TL-WR841ND. This TP-LINK Wireless N Router offers 300Mbps wireless speeds, secure your network with WPA2-PSK encryption, and allows you to connect to the internet by using various connection types, including Dynamic IP, Static IP, and PPPoE. It features a simple web-based management interface to make setup easy, and allows you to manage your network via your smartphone.
PDF
Download
Document
Advertisement
Advertisement
TP-LINK The Reliable Choice Quick Installation Guide 300Mbps Wireless N Router MODEL NO. TL-WR841N/TL-WR841 ND Package Contents TL-WR841N/TL-WR841 ND Power Adapter TM SE (7>- <un Ethernet Cable Resource CD FE Quick Installation Guide 3006 ная QIG 2 Configuration for Windows with Setup Wizard If you are using a MAC/Linux or a windows computer without a CD drive to run the mini CD, please refer to Appendix 1 for configuration. E Insert the TP-LINK Resource CD into the CD-ROM drive. В Here we take TL-WR841ND for example. Select 4 TL-WR841ND and click Easy Setup Assistant. The Reliable Choice ы - Wireless N Product Ц (lu User Guide N | sele del of | | = Browse CD EXIT 7106503891 After confirming the hardware connection and the status of LEDs, please click NEXT to continue. Easy Setup Assistant The Reliable Choice . : ~< WirelesaN Router Welcome LED Indicator Description Install Router f below t ; MSN Configure Router © (Power) Confirm Settings # (System) Flashing | The Router is working properly. (WLAN) Flashing The wireless function is enabled. o: There are devices linked to the corresponding ports but no S(WAN), n data transmitted or received. QIAN 1-9) Flashing | Sending or receiving data over corresponding port. If the LEDs don't indicate as described, pl heck the | of the router. Otherwise, please click NEXT to continue. BACK NEXT EXIT | After the connectivity is checked successfully, please click NEXT. TP-UINK AO The Reliable Choice и в Wireless N Router [| Welcome Check Successfully Install Router The router has been well connected. Please click NEXT to continue. Configure Router Confirm Settings yv 1 Network adapter enabled 2 Network status check completed BACK NEXT EXIT 580900 Hardware Connection Wall Socket Wall Socket Internet Wireless N Router Cable/DSL Modem To the modem's LAN port To LAN port To WAN port © O Power off your modem. Connect the WAN port on your Router to the modem's LAN port with an Ethernet cable. Connect your computer to one of the LAN ports labeled 1-4 on the Router with an Ethernet cable. Power on the modem and wait for one minute. Plug the provided Power Adapter into the POWER jack on the back of the Router and the other end to a standard electrical wall socket. Press the ON/OFF button to power on the Router. A Please confirm that the WIFI switch is ON so that client devices can connect to the Router wirelessly. Select the connection type your ISP provides and click NEXT. You can rename your wireless network on this page. Here we take Dynamic IP for example. The default wireless name is TP-LINK_XXXXXX. Click NEXT to continue. TP-UIN K = ПСО A не a fa vee LINK Easy Setup Assistant The Reliable Choice м в Wireless N Router Wireless N Router Welcome Select Connection Type Welcome Set Up Your Network Name SAA г Install Router Please select the proper WAN connection type: Install Router AE AE RPA E AE В В Configure Router ; Confi Rout Give a name for your wireless network (SSID): o F Jse thi lon if you are onfigure Kouter Dynamic IP ss i 05 nto you a TP-LINK_130919 y onli Confirm Settings Cable/DSL modem. Confirm Settings For example: My Network O Static IP - You will need the specific (fixed) IP Address assigned to th tion E (CE Maine © PPPoE -Use this option if you used to connect to Internet using a Broadband Connection that requires a Username and Password. J BACK NEXT EXIT | BACK NEXT EXIT If you are utilizing a cable modem to access the Internet, В You are recommended to select Most Security you may need to clone your MAC address. (WPA2-PSK) to secure your wireless network. Easy Setup Assistant NA De Wireless N Router = = WirelessiN Router 1 The Router is Welcome MAC Clone Welcome a pre-encrypted. Secure Your Wireless Network Install Router Most Cabl ice Provider) register MAC Address Install Router Fr ~ . o from the wired connection of your MAIN COMPUTER, if you add a router to AA Please select a security strength: The defa u It WI reless Configure Router the network, your ISP may not recognize the MAC address of the router and Configure Router - Es not allow it to connect, so we need to clone the MAC address from your Ev © Most Security (WPA2-PSK) Confirm Settings O Better Security (WEP-128hit} password, the same MAIN COMPUTER to the router. Confirm Settings я ~ tar] p Yes, i No Security . (clone MAC address). as the PIN code, IS WPA2-PSK: Please enter a key of 8 ~ 63 characters, or use the following TE ; р ice (do NOT clone MAC address). key generated randomly. printed on the label MAIN COMPUTER o L at the bottom of the connection, [ec] | [= | Router. (To be continued) . . . : Appendix 1: Configuring the Router via Web Management Page 2 Confi gura tion for Windows with Se tup Wizard (for Mac OS X/Linux users or Windows users who can't run the mini CD) E After confirming the configurations, click NEXT to continue. 11 If your client devices support WPS(Wi-Fi Protected E Open your browser and type http://tplinklogin.net in the address 4 The Dynamic IP is the suitable connection type for most cases. Here we take Setup), you can add your device to the network by field, then use the user name admin and password admin to log in. it as an example. On the next page, the cable modem users may need to 171 pushing the WPS button. Then click NEXT clone the MAC address from their main computer - the computer which is hb TP-LINK ‘Wireless M Router WRA41MD used to connect with the cable modem. Then click Next. I Confirm the Configurations = a | . Install Router Confirm the configurations you have set. If there is any wrong information, TP LIN 2 LE Setup Assistant User name: | | 6 admin wt | Quick Setup MAC Clone KA please go BACK to reset. Otherwise, click NEXT to submit your settings. = Wireless N Router OEM Password: | sons | Start >> >> Wireless >> Finish Confirm Settings VAN Connection Type: Dynamic IP Welcome WI-FI Protected Setup (WPS) di NO E Ue NT ee Er: 8 Please read help carefully on the right Network Name (S50) | TP-LINK 130919 A "UE 8 Remember my password 556) - Pa НЕНЕЕ Conner elos device © your tomaticall O Yes, | am connected by the main computer (clone MAC address). ee “ст ES Host Secu (PALES peu Le) © Mo, | am connected by another computer (do NOT clone MAC address). | Network Security Key: 12345670 Confirm Settings | Cli k . k $ t . h . d | К N xt WAN MAC Address: | 40-61-86-CF-20-7A | [ Restore Factory MAC | [ser these settings in a text file on my desktop. | i el... L - El IC Quic e up In t e main menu an С IC e ° Your PC's MAC Address: [40-61-86-cf-20-7a | [ Clone MAC Address ] Click NEXT to continue. | ex) | A You can save these settings in a text file on your ет >> WAN Connection Type >> Wireless >> Finish E You can rename your wireless network and create your own password on this page. ww desktop. If you forget the Network Security Key, you The quick setup will tell you how to configure the basic network parameters. The default wireless name is TP-LINK_XXXXXX, and the default wireless password, the can check the Router Settings.txt. To continue, please clickthe Next button. same as the PIN code, is printed on the bottom label. Click Next to continue. 12 Click FINISH to complete the setup. Ve 10 After the configuration is completed successfully, please Tv ace TT = = click NEXT. » - Wireless Network Че ET 130919 (Also called the SSID) HEN - Welcome ongratulations . . Region: United States У | EI — ct PE El Select the WAN connection type provided by your ISP. wai Eye 1 co Tae эт = [EATS] CELE FA ЕДЕ surfing the internet! , ‚ LATA = unes Route SMB RET rstro que amd Or you can select Auto-Detect and click Next to continue. N Confirm Settings Channel Width: Auto v Install Router Your TP-LINK router has been successfully configured, yy INK Easy Sat a ESA ; ax Tx Rate: [300Mbps =] E Е ОННЕСНЕНИ WEB ore gem ce interface. Start >> >> Wireless >> Finish тт Confirm Settings 1 Successfully configured router The Quick Setup is preparing to set up your connection type of WAN рой. Wireless Security: 2 Verified router settings | The Router will try to detect the Internet connection type your ISP provides if you select the Auto-Detect option. o Disable Security Otherwise, you need to specify the connection type manually. o WPA-PSKWPA2-PSK (® Auto-Detect - Let the Router automatically detectthe connection type your ISP provides. PSK Password: [12345670 —— || | O PPPoE - Usually for ADSL Modem and you will need a PPPoE usemame and password fram your ISP. ASCII 8 and 64.) © Dynamic IP - Usually for Cable Modem and the router will automatically obtain an IP address from the DHCP server © | . ° © Static IP - This type of connection uses a permanent, fixed (static) IP address that your ISP assigned. = You can click WEB management interface for more rr [= IEE advanced settings. | О Click Finish to make your settings take effect ° i Technical Support ) o ° m For more troubleshooting help, go to e www.tp-link.com/support/fag.as Appendix 2: Troubleshooting pportfaqasp | m To download the latest Firmware, Driver, Utility and User Guide, go to www.tp-link.com/support/download.asp e e 7 . 1. What can | do if | cannot access the Internet? 2. Whatcan | do if I cannot open the web manage- 4 How do | restore my Router’s configuration m For all other technical support, please contact us by using the following details: ment window? to its factory default settings? Global Australia & New Zealand 1) Check to verify all connections are connected properly. Tel: +86 755 26504400 Tel: AU 1300 87 5465 Eh Ai 1) For Windows 7/Vista E-mail : [email protected] Try with different Ethernet cables to ensure they are ) If your router does not work properly, you can reset it and then Service time: 24hrs, 7days à week E-mail support@tp Îink.com.au working properly. Go to ‘Start > Settings > Control Panel’ Click View configure it again. With the Router powered on, press and hold Singapore 403 Service time: 24hrs, 7 days a week . еле’ i + . наи 2) Check to see if you are able to access the Router's web network status and tasks > View status > Properties the Es RESET button a the rear panel for approximately 8 E-mail: [email protected] Tel: +39 02 66987799 и click’ i seconds perore releasing It. ° , E-mail: support.itetp-link.com management page. If not, please refer to “What can | and double click Internet Protocol Version4 9 UK Service time: 9:00 AM to 6:00 PM, do if | cannot open the web management window?" (TCP/IPv4). Select'Obtain an IP address automatically, Tel +44 (0) 845 1470017 from Monday to Friday choose ‘Obtain DNS server address automatically’ and EE Le Lp on SLED ‚ Service time: 24hrs, 7days a week Tel: +380 (44) 590-51-14 3) Please login the web management page click'OK' USA/Canada E-mail: [email protected] (http://tplinklogin.net), click the menu “Network > E 5 eo 1 service Gime: Monday to Friday ) : -mail: st . -link. 14:00 PM to 22:00 WAN", and ensure that the WAN Connection Type is 2) For Windows XP/2000 Service time: 24hrs,7days a week Brazilian Dynamic IP; this is the suitable connection type for most Go to ‘Start > Control Panel’ Click ‘Network and == 375465 (1300 S8TPLINK Fene e DSL/Cable modems and other networks. Internet Connections > Network Connections. E mail: support [email protected] E-mail: [email protected] Н Н 1 ° I i na? rvi ime: r р i i . . и Right-click ‘Local Area Connection; select ‘Properties days a mee 08:00 AM to 08:00 PM 19 Saturday 4) For cable modem users, please click menu “Network > ua , — MEA ЧА : eu and then double-click ‘Internet Protocol (TCP/IP). Select Turkey Indonesia MAC Clone . Click Clone MAC Address button and ‘Obtain an IP address automatically’ choose ‘Obtain Tel ll 9 25 (Turkish Service) va Ha 021 6222, ! 35 com then click Save. Reboot the modem first and then the DNS server address automatically’ and click ‘OK Wireless N Router Service time: 9:00 AM to 6:00 PM, Service time : Monday to Friday Router, try to access the Internet from your computer. If 7days a week 9:00 -12:00; 13:00 -18:00 7 2:00 2 the problem persists, please go to the next step. Poland ee ны holidays Tel: +48 (0) 801 080 618 / +48 22 Switzerland ° 7217563 (if calls from mobile phone) Tel: +41 (0) 848 800998 (German Service) 3. Whatcanldoifl forget my password? E-mail: [email protected] E-mail: [email protected] . Service time: Monday to Friday 9:00 AM Fee: 4-8 Rp/min, depending on rate of , oo gs = ZZ 1) For default wireless password: (Devlic h ES ing Ti ne TH Service L me: M day to Friday 9:00 AM our PC's ress: [Clone MAC Address] mare y ight Savi i ice time: to Fri : t Please refer to the “Wireless Password/PIN" labeled coon Aut e 1 E E © y : . . нэ on the bottom of the Router. Tel :+49 1805 875465 (German Service) e a +49 1805 TPLINK Russian Federation | 2) For the web management page password: E-mail: [email protected] Tel: 8 (499) 754-55-60 5) Connect your computer directly to your modem and J раде р Fee: 0.14 EUR/min from the German 8 (800) 250-55-60 attempt to access the Internet. If you are still unable to Reset the Router first and then use the default user fixed phone network and up to 0.42 (toll-free call from any RF region) . ‚ . . EUR/min from mobile phone E-mail: [email protected] access the Internet, please contact your internet name and password: admin, admin. Service Time: Monday to Friday 9:00 AM re AT provider for further assistance. to 6:00 PM. GMT+1 or GMT+2 (Moscow time) (Daylight Saving Time in Germany) *Except weekends and holidays in X * Except bank holidays in Hesse Russian Federation В TP-LINK TECHNOLOGIES CO., LTD. www.tp-link.com ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Black, White
- Wi-Fi 4 (802.11n) 300 Mbit/s
- Fast Ethernet
- Ethernet WAN
- Ethernet LAN (RJ-45) ports: 4
- Web-based management Quality of Service (QoS) support
Frequently asked questions
Check all connections, try different Ethernet cables, check Router's web management page, ensure WAN Connection Type is Dynamic IP, and for cable modem users, clone MAC address. If the problem persists, contact your ISP.
For Windows 7/Vista, check network status and tasks, Internet Protocol Version4 (TCP/IPv4) properties, ensure IP and DNS are set to obtain automatically. For Windows XP/2000, check Network and Internet Connections, Local Area Connection properties, Internet Protocol (TCP/IP) properties, ensure IP and DNS are set to obtain automatically.
Press and hold the RESET button on the rear panel for approximately 8 seconds.
For default wireless password, refer to the "Wireless Password/PIN" on the bottom of the Router. For the web management page password, reset the Router and use the default user name and password: admin, admin.